Éditeur(s) : Amsterdam : Jean Evertsz Cloppenburch
Siècle(s) traité(s) : 17
Droits : Domaine public
Provenance : Communauté d'agglomération de La Rochelle. Médiathèque Michel-Crépeau
Permalien : http://www.manioc.org/patrimon/MMC16127-2
MMC16127-2

Éditeur(s) : HAL CCSD
Résumé : poster
International audience
Locations for earthquake recorded in the Lesser Antilles subduction zone are processed separately by regional observatories, NEIC and ISC. There is no earthquake location catalog available compiling all available phase arrival data. We propose a new best complete earthquake catalog by merging all available phase arrival data for better constrains on earthquake locations. ISC provides the phase arrival data of 29243 earthquakes (magnitude range from 1.4 to 6.4) recorded by PRSN (Porto Rico), SRC (British West Indies), and from FUNVISIS (Venezuela). We add phases data from IPGP observatories for 68718 earthquakes from magnitudes 0.1 to 7.5 (OVSG, Guadeloupe, recorded 53226 earthquakes since 1981, and OVSM, Martinique, recorded 29931 earthquakes since 1972). IPGP also provides the accelerometer waveform data of the GIS-RAP network. We achieved automatic picking on the GIS-RAP data using the Component Energy Correlation Method. The CECM provides high precision phase detection, a realistic estimation of picking error and realistic weights that can be used with manual pick weights. The CECM add an average of 3 P-waves and 2 S-waves arrivals to 3846 earthquakes recorded by the GIS-RAP network since 2002. The final catalog contains 84979 earthquakes between 1972 and 2013, 24528 of which we compiled additional data. We achieve earthquake location using NonLinLoc, regional P and S waves data and a set of one dimensional velocity models. We produce improved locations for 22974 earthquakes (better residuals, on equal or larger arrival dataset) and improved duration magnitudes for 6258 earthquakes (using duration data and improved locations). A subset of best constrained 15626 hypocenters (with more than 8 phases and an average RMS of 0.48_0.77s) could be used for structural analysis and earthquake local tomography. Relative locations are to be applied in order to image active faulting. We aim to understand coupling in the seismogenic zone as well as triggering mechanisms of intermediate depth seismicity like fluid migration beneath the volcanic arc.
Geophysical Research Abstracts
Vienne, Austria

hal-01059207
https://hal-brgm.archives-ouvertes.fr/hal-01059207

Éditeur(s) : Copernicus Gesellschaft Mbh
Résumé : Three methods for automatic detection of mesoscale coherent structures are applied to Sea Level Anomaly (SLA) fields in the South Atlantic. The first method is based on the wavelet packet decomposition of the SLA data, the second on the estimation of the Okubo-Weiss parameter and the third on a geometric criterion using the winding-angle approach. The results provide a comprehensive picture of the mesoscale eddies over the South Atlantic Ocean, emphasizing their main characteristics: amplitude, diameter, duration and propagation velocity. Five areas of particular eddy dynamics were selected: the Brazil Current, the Agulhas eddies propagation corridor, the Agulhas Current retroflexion, the Brazil-Malvinas confluence zone and the northern branch of the Antarctic Circumpolar Current (ACC). For these areas, mean propagation velocities and amplitudes were calculated. Two regions with long duration eddies were observed, corresponding to the propagation of Agulhas and ACC eddies. Through the comparison between the identification methods, their main advantages and shortcomings were detailed. The geometric criterion presents the best performance, mainly in terms of number of detections, duration of the eddies and propagation velocities. The results are particularly good for the Agulhas Rings, which have the longest lifetimes of all South Atlantic eddies.
Ocean Science (1812-0784) (Copernicus Gesellschaft Mbh), 2011 , Vol. 7 , N. 3 , P. 317-334

Droits : Author(s) 2011. This work is distributed under the Creative Commons Attribution 3.0 License. EGU
http://archimer.ifremer.fr/doc/00039/15051/12378.pdf
DOI:10.5194/os-7-317-2011
http://archimer.ifremer.fr/doc/00039/15051/

Éditeur(s) : HAL CCSD
Résumé : International audience
In the external Western Alps, the collision started with the shortening of the proximal European (Dauphinois) margin. One peculiar feature is the crustal thickening that finally led to the exhumation of the basement External Crystalline Massifs (ECM) during the Neogene. In these massifs, various age of shortening, structural style and sequence of deformation have been proposed leading to different kinematics along the Alpine arc that in turn do not imply the same crustal/lithospheric strength. In this contribution, we present new structural and microstructural data along with Ar/Ar ages from field studies in the Oisans-Grandes Rousses massifs, between Grenoble and Briançon). From balanced cross-sections, we show that about half of the external zone crustal shortening is accommodated within the ECM with similar Ar/Ar ages in all massifs. Furthermore, the shear zones present very large thicknesses (several hundred meters) and do not reactivated either the inherited Liassic normal faults or the Variscan foliation. Finally, the main shortening structures are localized beneath inherited Liassic syn-rift basins. These results suggest that the crust was weak during its shortening. Such behavior is most likely due to the combination of several factors: the crust burial (below the overthrusting internal units) down to about 10km, the presence of weak inherited syn-rift basins, and the strain softening in shear zones that evolve in mica-rich phyllonites. These results are consistent with the studies in the Aar massif and should most likely apply to the Mont Blanc massif, whose relationships with its cover are still debated.
EGU General Assembly
Vienne, Austria

insu-00839426
https://hal-insu.archives-ouvertes.fr/insu-00839426
BIBCODE : 2013EGUGA..15.8837B

Éditeur(s) : HAL CCSD
Résumé : International audience
Geophysical Research Abstracts
Wien, Austria

hal-00417298
https://hal.archives-ouvertes.fr/hal-00417298

Éditeur(s) : Copernicus Gesellschaft Mbh
Résumé : Boundary Exchange (BE - exchange of elements between continental margins and the open ocean) has been emphasized as a key process in the oceanic cycle of neodymium (Nd) (Lacan and Jeandel, 2005a). Here, we use a regional eddy-permitting resolution Ocean General Circulation Model (1/4A degrees) of the North Atlantic basin to simulate the distribution of the Nd isotopic composition, considering BE as the only source. Results show good agreement with the data, confirming previous results obtained using the same parameterization of the source in a coarse resolution global model (Arsouze et al., 2007), and therefore the major control played by the BE processes in the Nd cycle on the regional scale. We quantified the exchange rate of the BE, and found that the time needed for the continental margins to significantly imprint the chemical composition of the surrounding seawater (further referred as characteristic exchange time) is of the order of 0.2 years. However, the timescale of the BE may be subject to large variations as a very short exchange time (a few days) is needed to reproduce the highly negative values of surface waters in the Labrador Sea, whereas a longer one (up to 0.5 years) is required to simulate the radiogenic influence of basaltic margins and distinguish the negative isotopic signatures of North Atlantic Deep Water from the more radiogenic southern origin water masses. This likely represents geographical variations in erosion fluxes and the subsequent particle load onto the continental margins. Although the parameterization of the BE is the same in both configurations of the model, the characteristic exchange time in the eddy-permitting configuration is significantly lower than the previous evaluations using a low resolution configuration (6 months to 10 years), but however in agreement with the available seawater Nd isotope data. This results highlights the importance of the model dynamics in simulating the BE process.
Ocean Science (1812-0784) (Copernicus Gesellschaft Mbh), 2010 , Vol. 6 , N. 3 , P. 789-797

Droits : Author(s) 2010. This work is distributed, EGU
http://archimer.ifremer.fr/doc/00013/12412/9201.pdf
DOI:10.5194/os-6-789-2010
http://archimer.ifremer.fr/doc/00013/12412/

Éditeur(s) : HAL CCSD
Résumé : International audience
The « METYSS » cruise was carried out in June 2009 onboard the R/V « Téthys II » along the eastern Sardinian and south-eastern Corsican margins, western Tyrrhenian Sea, in order to better constrain the potential links between deformation related to either crustal tectonics or salt tectonics and sediment accumulation, especially during the Messinian and Plio-Quaternary times. We acquired 15 high-resolution seismic reflection profiles (about 1200 km in cumulative length) along the south-eastern Corsican margin, immediately north of the Bonifacio Strait and along the upper and middle parts of the eastern Sardinian margin, from the continental slope to the Cornaglia Terrace. The Tyrrhenian Sea is considered as a Neogene back-arc basin that opened during continental rifting and oceanic spreading related to the eastward migration of the Apennine subduction system from Tortonian to Pliocene times (Jolivet et al., 2006). Rifting of the Tyrrhenian Sea started first along the Eastern Sardinian margin during the Tortonian-Messinian times and therefore the series of that age should be considered as syn-rift sediments (Sartori et al., 2004). The « METYSS » seismic profiles clearly illustrate that this part of the Tyrrhenian was highly segmented during the rifting stage by N-S trending normal faults delineating ridges (e.g., Baronie Ridge) and basins (e.g., Sardinian Basin and Cornaglia Terrace), as previously described for example by Thommeret (1999) and Sartori et al. (2004). The Messinian sedimentary units and especially the « Upper Unit » (UU, Lofi et al., this congress, corresponding to the « Upper Evaporites » in the previous literature) are, without any doubt, of syn-rift age, as they display a fan-shaped stratal geometry. The Mobile Unit (MU, Lofi et al., this congress), i.e. the Messinian halite, is clearly imaged in the study area and its spatial repartition can be outlined. The highly-variable thickness of the confined salt basins could be due to the initial basin geometry (i.e. before the Messinian salinity Crisis) or to the syn-rift character of the deposition. Southeastward of the study area, in the vicinity of the Cornaglia Seamount, salt tectonics appears surprisingly vigorous. More surprisingly, several normal faults seem to have remained active in recent times, if not even at present time. Fault slip has been recorded by bathymetric scarps and associated footwall debris flows interfingered within the Plio-Quaternary sequence, even though the eastern Sardinian margin is usually considered to be passive now. Moreover, some amount of tectonic inversion is visible on some normal faults that show contractional or transpressional components of late slip. In addition, this “post-rift” deformation can be illustrated within the Plio-Quaternary sequence by a regional unconformity. Consequently, numerous mass-transport deposits and channel-levees systems observed in the Plio-Quaternary cover could be partly controlled by tectonic activity. These very preliminary results require further investigations in order to better decipher the role of crustal tectonics and salt tectonics, salt-related structures being very efficient markers to discriminate between the respective contribution of gravity-driven, salt tectonics and deep-seated, crustal tectonics (Gaullier et al., 2010). Finally, we aim to precisely determine the relative vertical movements (tilting, subsidence, magmatism. . . ) and geodynamical history of the different segments of the area since 6 Ma.
Geophysical Research Abstracts
Vienne, Austria

hal-00537828
https://hal-brgm.archives-ouvertes.fr/hal-00537828
https://hal-brgm.archives-ouvertes.fr/hal-00537828/document
https://hal-brgm.archives-ouvertes.fr/hal-00537828/file/EGU2010-15469_ref6821.pdf

Éditeur(s) : HAL CCSD
Résumé : High Pressure - Low Temperature (HP-LT) rocks testify for burying and exhumation of crustal material in subduction zones. Their complete exhumation is the result of processes acting during (syn-orogenic) and after (post-orogenic) subduction is active, the latter partly obliterating the first. In the Aegean domain, the Attic-Cycladic Blueschist unit (ACBU) is a HP-LT unit exhumed in metamorphic core complexes (MCCs) in the back-arc domain of the Hellenic subduction zone. This study is an attempt to distinguish features related to syn-orogenic exhumation processes responsible for the first stages of exhumation This syn-orogenic "message" has to be read through the post-convergence structural and thermal overprint that accompanied the formation of the MCCs. Particularly, the geometry, the timing and the amount of the syn-orogenic exhumation has to be determined. We investigate these features with coupled field, metamorphic petrology and radiochronology studies First, based on observations on Ios (southern Cyclades), it has recently been proposed that syn-orogenic exhumation of the ACBU was accommodated by a basal thrust over the Cycladic Basement (CB) [Huet, et al., 2009]. The peak conditions, deduced from pseudosections calculation for the Ios main lithologies, are 500 °C-19 kbar for the ACBU and 550 °C-16 kbar for the CB. Exhumation until 400 °C-8 kbar is considered as syn-orogenic. Second, phengites populations, single grains and in situ 40Ar-39Ar geochronology has been carried out on samples from Tinos and Andros (northern Cyclades), Syros (central Cyclades) and Ios. The results gather in several clusters: 50-55 Ma, 40-45 Ma, 30-35 Ma, and 22-26 Ma. Based on these new P-T-t data and a synthesis of published data, we are able to refine the geometry and the timing of the exhumation of the ACBU. Data from the whole Cyclades exhibit little differences in ages and P-T conditions for the successive stages of exhumation. The peak of pressure (500±50 °C-18±1 kbar) has been reached at 50-55 Ma from Tinos to Ios. The onset of the exhumation occurred at 40-45 Ma in blueschist facies conditions, between a thrust at their bottom and a detachment at their top. The following decompression was accompanied by cooling until 30-35 Ma (400±50 °C-8±1 kbar). At that time, the boundary conditions switched to extension. Finally, we propose a model for the exhumation of HP-LT units accounting for these data. We also consider the rheological implications of the syn-orogenic structuration of the Aegean wedge on the post-orogenic evolution. B. Huet, L. Labrousse, and L. Jolivet [2009] Thrust or detachment? Exhumation processes in the Aegean: Insight from a field study on Ios (Cyclades, Greece), Tectonics, 28, 3, doi:10.1029/2008TC002397.
EGU General Assembly
Vienne, Austria

insu-00839054
https://hal-insu.archives-ouvertes.fr/insu-00839054
BIBCODE : 2010EGUGA..1214098H

Éditeur(s) : HAL CCSD European Geosciences Union (EGU) European Geosciences Union
Résumé : The Moroccan Mediterranean coast is located in one of the area's most vulnerable to extreme weather events or tsunami hazards. The objective of this research is to reconstruct the historical extreme submersion-event record using sea-induced deposits preserved in coastal lagoon. The Nador lagoon is the largest Moroccan lagoon (115 km2). It is located along the western Mediterranean, which has a high cyclogenetic character and is exposed to tsunamis from the Alboran Sea. The sandy barrier which separates the lagoon from the Mediterranean Sea is marked by much overwash, which indicate how intensely it has been exposed to the adverse sea events through history. Using the UWITEC© gravity coring platform, an undisturbed MC4.5 core (1.15 m long) was successfully sampled in the studied lagoon. To identify extreme sea events, a multi-proxy approach was applied combining sedimentological and geochemical data. Three paleoevents were identified; all of them are concentrated over the last 500 years, and the most recent event corresponds to the 1889 storm. For the others deposits, it is difficult to determine exactly their origin; however, the high frequency of storm events over the relevant period and the absence of historical tsunamis evidence is more in favor of the meteorological origin.
ISSN: 1561-8633

hal-01146451
https://hal.archives-ouvertes.fr/hal-01146451
DOI : 10.5194/nhess-15-203-2015

Éditeur(s) : HAL CCSD
Résumé : International audience
Mylonite-bearing crustal shear zones are exhumed extensions at depth of (potentially seismogenic) brittle faultsat shallow structural level. By concentrating deformation, shear zones play a major role in the rheology and mechanicalbehavior of the continental crust. Analysis of shear zone geometry and microstructures is a useful toolto decipher deformation kinematics, though finite strain estimation is still relatively qualitative. Timing of thedeformation has also been the focus of numerous studies using the complete spectrum of geochronometers. However,only rare examples provide geochronological data that can be unambiguously linked with deformation. Thus,time-scales over which major mylonite zones develop and remain active under ductile conditions as well as theirstrain rates often remain poorly documented. Several sections across the South Armorican Shear Zone (SASZ),a crustal-scale, several km-thick dextral shear zone were investigated by structural, petrological and Ar/Ar radiochronologicalmethods. Finite strain profiles on these sections showed a strong deformation partitioning towardsthe ultramylonite core of the SASZ, with a decrease, of both the C’/S mean angle (from ca. 45 to less than5) and the Quartz grain-size (from ca. 150 to 5 m). In parallel, conventional and in-situ Ar/Ar datings on thefabric-forming white micas were performed on compositionally complex white-micas. Inherited magmatic muscovitescarried by the foliation and newly-formed, syn-tectonic substituted phengites located along the shear bandsyielded 2 age groups for the less deformed samples. Along the shear zone cross-section, the difference betweenthese two ages evolves from 10-15 Ma in weakly deformed domains to zero toward the SASZ core. In addition, thevery fine-grained syn-tectonic phengites yielded the same ca. 300-298 Ma age irrespectively of their distance to thecore of the shear zone, even in slightly deformed rocks distant by several km. These results support a new modelof crustal-scale shear zone activity, where the whole body of the shear zone is active throughout its history, i.e.the actively deforming zone does not get progressively narrower. The strain distribution nevertheless evolves withtime, with an increasingly larger fraction partitioned in the ultramylonitic core. Besides, combination of the finitestrain estimations and the Ar/Ar ages enables us to assess the range of strain rates associated with mylonitization.
EGU General Assembly 2014
Vienne, Austria

insu-01565057
https://hal-insu.archives-ouvertes.fr/insu-01565057

Éditeur(s) : HAL CCSD
Résumé : International audience
The Transbaikal region extends over several hundreds of kilometres east of the Baikal Rift System. It is characterized by a number of sub-parallel Mesozoic grabens or half grabens generally filled with late Jurassic to Early Cretaceous clastic sediments interbedded with coal layers (1). Similar basins occur on an even larger area spanning from the Transbaikal region down to Korea implying a large-scale extensional process affecting most of the Amuria plate during the Mesozoic. In the Transbaikal region, the normal faults controlling the edges of the Mesozoic basins are generally superimposed to Palaeozoic ductile shear zones implying a strong localisation of the extensional deformation on inherited structures. Recent studies, associated to our own fieldwork demonstrated that some of the faults were again activated (2), still as extensional faults, during the Tertiary or Quaternary, and that some of them are presently active. The closure of the Mongol-Okhotsk ocean separating the Siberian plate from the Amurian block during the Mesozoic corresponds to a major event in the growth process of the East Asian continent. The oceanic suture zone is situated on the southern edge of the Transbaikal region and its roughly SW-NE direction is parallel to the basins (3). The timing of the closure of the Mongol-Okhotsk ocean is still highly debated: while sedimentological and tectonic data suggest that the oceanic closure and the following collision occurred in early Middle Jurassic (4), paleomagnetic studies advocate for a Early Cretaceous collision (5). Furthermore, several other questions remain on the localization, the size and the fate of the relief that most probably formed during the collision between the Amuria block and the Siberian craton. In order to answer those questions we used low temperature thermochronology data associated to tectonic, sedimentology and palinology to investigate the evolution of the Transbaikal grabens from Mesozoic to Present. Tectonic and thermochronology data provide evidences of exhumation and erosion along the eastern edge of the Siberian craton during the Middle Jurassic as well as a potential continuum of deformation between the Mesozoic extension and the initiation of the Baikal Rift System (6). Sedimentology and palinology reveals that the sediments deposited in the Transbaikal basin did not registered large-scale compressive deformation during or after their Late Jurassic - Early Cretaceous deposition and that they do not correspond to the dismantling of a strong compressive relief.
Geophysical Research Abstracts
Vienne, Austria

insu-00810487
https://hal-insu.archives-ouvertes.fr/insu-00810487

Éditeur(s) : HAL CCSD
Résumé : International audience
EGU General Assembly 2014
Vienne, Austria

insu-01113704
https://hal-insu.archives-ouvertes.fr/insu-01113704

Éditeur(s) : HAL CCSD European Geosciences Union (EGU)
Résumé : International audience
We consider here wind speed time series and the aggregate output wind power from a wind farm. We study their scaling statistics in the framework of fully developed turbulence and Kolmogorov's theory. We estimate their Fourier power spectra and consider their scaling properties in the physical space. We show that the atmospheric wind speed and the aggregate power output from a wind farm are intermittent and multifractal over a wide range of scales. The coupling between simultaneous data of the wind speed and aggregate power output is investigated through a joint multifractal description using the generalized correlation functions (GCFs). This multiscaling test is compatible with a linear relation between the wind speed and the aggregate power output fluctuations for timescales T ⩾ 103 s ≃ 15 min
ISSN: 1023-5809

hal-01527893
https://hal.archives-ouvertes.fr/hal-01527893
DOI : 10.5194/npg-21-379-2014

Éditeur(s) : HAL CCSD
EGU General Assembly 2009
Vienne, Austria

hal-00483584
https://hal.archives-ouvertes.fr/hal-00483584

Éditeur(s) : HAL CCSD Copernicus Publications on behalf of the European Geosciences Union
Résumé : International audience
The 1867 Virgin Island Tsunami reached large magnitude on the coasts of the Caribbean Islands. A maximum tsunami height of 10 m was reported for two coastal locations (Deshaies and Sainte-Rose) in Guadeloupe. Modelling of the 1867 tsunami is performed in the framework of the nonlinear shallow-water theory. The directivity of the tsunami wave source in the Caribbean Sea according to the assumed initial waveform is investigated. The tsunami records at the several coastal regions in the Lesser Antilles, Virgin Islands, Puerto Rico and South America are simulated. The comparison between the computed and observed data is in reasonable agreement.
Natural Hazards and Earth System Science

Droits : info:eu-repo/semantics/OpenAccess
hal-00330900
https://hal.archives-ouvertes.fr/hal-00330900
https://hal.archives-ouvertes.fr/hal-00330900/document
https://hal.archives-ouvertes.fr/hal-00330900/file/nhess-3-367-2003.pdf

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
Measurements of branch xylem density, D_x, were made for 1466 trees representing 503 species, sampled from 80 sites across the Amazon basin. Measured values ranged from 240 kg m^?3 for a Brosimum parinarioides from Tapajos in West Pará, Brazil to 1130 kg m^?3 for an Aiouea sp. from Caxiuana, Central Pará, Brazil. Analysis of variance showed significant differences in average D_x across the sample plots as well as significant differences between families, genera and species. A partitioning of the total variance in the dataset showed that geographic location and plot accounted for 33% of the variation with species identity accounting for an additional 27%; the remaining "residual" 40% of the variance accounted for by tree to tree (within species) variation. Variations in plot means, were, however, hardly accountable at all by differences in species composition. Rather, it would seem that variations of xylem density at plot level must be explained by the effects of soils and/or climate. This conclusion is supported by the observation that the xylem density of the more widely distributed species varied systematically from plot to plot. Thus, as well as having a genetic component branch xylem density is a plastic trait that, for any given species, varies according to where the tree is growing and in a predictable manner. Exceptions to this general rule may be some pioneers belonging to Pourouma and Miconia and some species within the genera Brosimum, Rinorea and Trichillia which seem to be more constrained in terms of this plasticity than most species sampled as part of this study.
ISSN: 1810-6277

hal-00298004
https://hal.archives-ouvertes.fr/hal-00298004
https://hal.archives-ouvertes.fr/hal-00298004/document
https://hal.archives-ouvertes.fr/hal-00298004/file/bgd-5-2003-2008.pdf

Éditeur(s) : HAL CCSD
Résumé : EGU2012-6377- Geophysical Research Abstracts vol. 14
The hot geothermal fluid produced by the wells of the Bouillante power station, in Guadeloupe, contains various dissolved species such as silica or some metals (Zn, Pb, etc). During the exploitation, the geothermal fluid is flashing and cooling (from 260 to 160°C for the high-pressure steam-liquid separation and down to 110°C for the low-pressure phase separation of a part of the separated liquid at 160°C). Consequently, the dissolved species can form scale deposits such as amorphous silica or poly-metallic sulphides, according to the exploitation conditions, and cause serious scaling problems on the production and the surface installations. These minerals could also precipitate during the partial underground re-injection of the production fluids which is being set up in the Bouillante power station. In this study, in order to predict and prevent the possible silica precipitation at temperature lower than 160°C, during the partial underground reinjection of the production fluids of Bouillante or their thermal valorization down to 110°C temperatures, we propose to investigate on site the kinetics of silica precipitation as a function of temperature and pH. The experiments presented here were carried out on site on samples of separated waters collected after the steam-water separator at 160°C, containing about 600 ppm of SiO2, at four cooling temperatures: 22, 50, 75 and 90°C, and for pH ranging from 4 to 9. These experiments showed that the silica deposition was always initiated by a polymerization mechanism characterized by an order 2 kinetic law and the formation of a white colloidal gel, which slowed down the silica precipitation under solid form. This latter was observed much later, after the polymerization stage, and only in particular conditions (long time of atmospheric exposure, water stagnation,. . . ). The results also confirmed that the silica precipitation kinetics is strongly dependent on pH. In acidic solution, a transition period is observed before the beginning to the silica polymerization. At neutral-basic pH, there is no transition period and the rate of polymerization is maximal for pH close to 8. The undergoing modeling of these experimental data and specific surface area measurements on the colloidal gel will allow us to determinate the kinetics parameters useful for the prediction and prevention of silica precipitation under the specific exploitation conditions of Bouillante power station. This work is financially supported by ADEME (French Agency for Energy and Environment), BRGM and UAG.
EGU General Assembly 2012
Vienne, Austria

hal-00697627
https://hal-brgm.archives-ouvertes.fr/hal-00697627

Éditeur(s) : HAL CCSD Copernicus Publications on behalf of the European Geosciences Union
Résumé : International audience
The main goal of this study is to give the preliminary estimates of the tsunami risks for the Lesser Antilles. We investigated the available data of the tsunamis in the French West Indies using the historical data and catalogue of the tsunamis in the Lesser Antilles. In total, twenty-four (24) tsunamis were recorded in this area for last 400 years; sixteen (16) events of the seismic origin, five (5) events of volcanic origin and three (3) events of unknown source. Most of the tsunamigenic earthquakes (13) occurred in the Caribbean, and three tsunamis were generated during far away earthquakes (near the coasts of Portugal and Costa Rica). The estimates of tsunami risk are based on a preliminary analysis of the seismicity of the Caribbean area and the historical data of tsunamis. In particular, we investigate the occurrence of historical extreme runup tsunami data on Guadeloupe, and these data are revised after a survey in Guadeloupe.
Natural Hazards and Earth System Science

Droits : info:eu-repo/semantics/OpenAccess
hal-00330894
https://hal.archives-ouvertes.fr/hal-00330894
https://hal.archives-ouvertes.fr/hal-00330894/document
https://hal.archives-ouvertes.fr/hal-00330894/file/nhess-1-221-2001.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
Volumes of magma intruded in and emitted by volcanoes through time can be estimated by reconstruction of vol-cano's morphology and time sequence. Classical approaches for quantifying magma volumes on active volcanoes are based on the difference between pre-and post-eruption digital elevation models (DEM), but this kind of approach needs the pre-eruptive surfaces to be available. For old and eroded volcanoes these surfaces are poorly constrained. However, because the geometrical form of many volcanic edifices exhibits a remarkable symmetry we propose, here, a new approach using primary volcanic landforms in order to estimate the amount of the both erupted and eroded material and to locate eruptive centers. A large fraction of composite volcanoes have near constant slope on their flanks and a form that is concave upwards near their summits. But many phenomena can lead to non-symetrical edifices and complex morphologies can result, for example from parasitic centers of volcanism on the flanks, from alternation of short effusive and explosive construction phases, from flank or caldera collapses, or from glacial and other types of erosion. In this study we propose that, on the first order approximation, complex morphologies can be modeled by piling regular cones. In this model, cones centers and slopes are derived by fitting primary volcanic landform with a linear function :elevation=f(distance from center). Such an approach allows to estimate both errors on location of the eruptive center and on the volume of the resulting cones. This model can then be used for quantifying volume of erupted and eroded material, and for quantifying catastrophic events as giant landslides or flank collapse. This approach is tested on four different active volcanoes : Mount Mayon (Philippines), Mount Fuji (Japan), Mount Etna (Sicily) and Mount Teide (Canary Island) to estimate errors in volume between modeled and actual edifices. It is then used on volcanoes of La Réunion hotspot to reconstruct the Piton des Neiges and Piton de la Fournaise volcanoes at its different stages of growing.
EGU 2014
Vienna, Austria

hal-01386609
http://hal.univ-reunion.fr/hal-01386609

Éditeur(s) : HAL CCSD
Résumé : International audience
The way faults control upward fluid flow in extensive hydrothermal systems without an abnormal heat source such as volcanic or plutonic activity is still unclear. In the Eastern Pyrénées, an alignment of 29 hot springs (from 29 • C to 73 • C) along the Têt normal Fault offers the opportunity to study this process. Using an integrated multi-scale geological approach including mapping, remote sensing, macro and microscopic analyses of fault zones, we show that hot springs locate close to high topographic reliefs related to fault throw and segmentation. Emergences are always in crystalline rocks at gneiss-metasediments contacts, mostly in the Têt Fault footwall. In more details, they localize either (1) in brittle fault damage zones at the intersection between the Têt Fault and subsidiary faults, and (2) into hercynian ductile faults where dissolution cavities run along shear zones. Using these observations and 2D preliminary numerical simulations, we propose a hydrogeological model of upward hydrothermal flow. Meteoric fluids infiltrate at high altitude in the fault footwall relief where they acquire temperature because of the geothermal gradient. Hydraulic gradient and buoyancy forces allow them to upflow along fault-related permeability anisotropies. The identification and prioritization of the features controlling this kind of system have important implications for geothermal exploration and for the understanding of fluid-flow into the brittle Earth's crust in general.
EGU 2017
Vienne, Austria

hal-01491096
https://hal-brgm.archives-ouvertes.fr/hal-01491096
https://hal-brgm.archives-ouvertes.fr/hal-01491096/document
https://hal-brgm.archives-ouvertes.fr/hal-01491096/file/EGU2017-Taillefer-etal_4996.pdf