Extrait de : [Registre de licences personnelles] de 1922 à 1924 (p.[126])
Résumé : Photographie d'identité
Siècle(s) traité(s) : 20
Droits : Domaine public
Permalien : http://www.manioc.org/images/ORK132550126i4
ORK132550126i4

Éditeur(s) : London : Adam et Charles Black
Extrait de : Notes upon the Island of Dominica. (British West Indies) (p. 70)
Résumé : Source d'eau bouillante dans le cratère de Boiling Lake, dans la vallée de la Grande Soufrière, Dominique.
Siècle(s) traité(s) : 20
Permalien : http://www.manioc.org/images/FCL18003-0093i1
FCL18003-0093i1

Éditeur(s) : AIHP-GEODE : Archéologie Industrielle, Histoire, Patrimoine/Géographie- Développement Environnement de la Caraïbe CRPLC : Centre de Recherche sur les Pouvoirs Locaux dans la Caraïbe CRILLASH : Centre de Recherches Interdisciplinaires en Lettres, Langues, Arts et Sciences Humaines Université de Paris I Panthéon-Sorbonne
Extrait de : "La révolution française et les colonies. Couleur de peau dans l'espace colonial français (1777-1815)" : grand séminaire, les 17 et 18 mai 2016. Université des Antilles
Description : Dans le rôle d'imposition de 1664, « plusieurs nègres libres », à l'instar de Jean Sence, du quartier de la Rivière-à-Collas jusqu'à l'Anse à la Barque (actuelle commune de Bouillante en Guadeloupe), sont maîtres de case. Dans le dénombrement de 1671, Jean Sence (écrit aussi Sanse) possède deux esclaves. Il est donc attesté dès le XVIIe siècle que des non-Européens possèdent des esclaves ou des terres. Au début de la Révolution française, ce sont environ 5% des esclaves qui appartiennent à des libres de couleur. Cette contribution s'intéressera à la constitution de cette catégorie de propriétaires jusqu'à la première abolition de l'esclavage, à partir de l'étude des recensements, des actes notariés et des registres paroissiaux.
Siècle(s) traité(s) : 17
Droits : CC-BY-NC-ND - Attribution - Pas d'utilisation commerciale - Pas de modification
Permalien : http://www.manioc.org/fichiers/V16095
V16095

Éditeur(s) : Amer Geophysical Union
Résumé : New high-resolution multichannel seismic data (GWADASEIS-2009 and JC45/46-2010 cruises; 72 and 60 channels, respectively) combined with previous data (AGUADOMAR-1999 and CARAVAL-2002; 6 and 24 channels, respectively) allow a detailed investigation of mass-wasting processes around the volcanic island of Montserrat in the Lesser Antilles. Seven submarine deposits have sources on the flanks of Montserrat, while three are related to the nearby Kahouanne submarine volcanoes. The most voluminous deposit (similar to 20 km(3)) within the Bouillante-Montserrat half-graben has not been described previously and is probably related to a flank instability of the Centre Hills Volcano on Montserrat, while other events are related to the younger South Soufriere Hills-Soufriere Hills volcanic complex. All deposits are located to the south or southeast of the island in an area delimited by faults of the Bouillante-Montserrat half-graben. They cover a large part of the southeast quarter of the surrounding seafloor (similar to 520 km(2)), with a total volume of similar to 40 km(3). Our observations suggest that the Bouillante-Montserrat half-graben exerts a control on the extent and propagation of the most voluminous deposits. We propose an interpretation for mass-wasting processes around Montserrat similar to what has happened for the southern islands of the Lesser Antilles.
Geochemistry Geophysics Geosystems (1525-2027) (Amer Geophysical Union), 2011-05 , Vol. 12 , N. 5 , P. Q05006

Droits : Copyright 2011 by the American Geophysical Union
http://archimer.ifremer.fr/doc/00200/31100/29510.pdf
DOI:10.1029/2010GC003451
http://archimer.ifremer.fr/doc/00200/31100/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Despite many studies, our understanding of silica precipitation from natural waters remains limited, in particular for geothermal waters. Here we present a detailed study on the kinetics of silica polymerization as a function of fluid temperature and pH using high-temperature (250-260 °C) seawater-derived geothermal fluids as those discharged from the Bouillante geothermal site.We monitored the on-site decrease in monomeric silica concentration(initial SiO2 concentration of about 600 mg/l)with time using the molybdenum blue spectrophotometric method on samples of separated water collected from the high-pressure separator at 167 °C and cooled to 25, 50, 75, and 90 °C and for pH values ranging from 5 to 8. During all these experiments, only silica polymerization was observed, with the formation of colloidal particles in suspension in the solutions. No scaling of amorphous silica was formed. The collected data were after modeled in order to determine the useful kinetic parameters for predicting and preventing amorphous silica precipitation in the production wells during fluid exploitation in the specific context of Bouillante. Results under the investigated experimental conditions show that the kinetics of silica precipitation is affected more strongly by pH than by temperature change. The reaction in the acidic Bouillante solution begins with a transition period that significantly decreases the kinetics of silica polymerization. Modeling the experimental data indicates that the silica polymerization up to the state of equilibrium is characterized by a 2nd-order kinetic law relative to dissolved silica; this could indicate that the polymerization is controlled mainly by the formation of dimers. However, the first hour of the experiments is better characterized by a 4th-order kinetic law, suggesting more complex polymerization reactions in the initial stage with the formation of nanocolloidal particles containing 3 to 4 monomers. In both cases, the corresponding kinetics rate constant k is linearly dependent on pH for pH between 5 and 7. The activation energy Ea for the overall reaction, calculated using the Arrhenius equation under the considered pH and temperature conditions, ranges between 41±9.8 and 54±9.6 kJ/mol. To complete this work, the colloid particles formed at the end of the kinetics experiments were extracted and analyzed by SEM and TEM microscopy, X-ray Diffraction and the BET method. Results show that the size of the colloids increase and their specific surface decrease with increasing pH and are thus dependent on pH. Globally, our work provides a reliable database for understanding silica polymerization kinetics in natural geothermal brines or geologic waters characterized by a near neutral pH and moderate dissolved silica concentrations.
ISSN: 0009-2541

hal-01403092
https://hal-brgm.archives-ouvertes.fr/hal-01403092
DOI : 10.1016/j.chemgeo.2016.08.031

Résumé : Le fluide chaud produit par les forages de la centrale géothermique de Bouillante (Guadeloupe) est enrichi en espèces dissoutes telles que la silice qui peuvent précipiter sous forme de dépôts solides lors de son refroidissement et gêner fortement la production électrique. L’un des principaux objectifs de ce travail de thèse a donc été d’améliorer l’état des connaissances sur les conditions physiques, chimiques et cinétiques de la précipitation de la silice amorphe à Bouillante. Après une étude des caractéristiques physico-chimiques des fluides et des dépôts associés au champ de Bouillante, des expériences sur la cinétique de précipitation de la silice, sur site, pour une large gamme de température (25 - 90°C) et de pH (4 - 12) ont été menées et analysées en détail.Pour l’ensemble de ces expériences, seule la polymérisation (réversible) de la silice dissoute, sous forme de suspensions colloïdales très stables en solution, a été observée. La modélisation des données expérimentales de cinétique montre que la vitesse de polymérisation de la silice suit une loi d’ordre 2 vis-à-vis de la silice dissoute jusqu’à l’équilibre en accord avec une dimérisation de la silice. Par contre, durant l’étape initiale de la réaction, une loi d’ordre 4 semble mieux adaptée, suggérant des réactions de polymérisation plus complexes avec formation de tétramères. La température a un effet limité sur la cinétique de polymérisation de la silice comparé à l’effet du pH qui est beaucoup plus important. L’énergie d’activation de la réaction globale est de 41 - 54 kJ pour des pH compris entre 5 et 8.La caractérisation de la silice précipitée a mis en évidence des différences notables entre la structure poreuse de la silice solide prélevée sur les installations de surface et celle de la silice colloïdale obtenue par polymérisation lors des expériences de cinétique, ce qui semble indiquer que des mécanismes différents interviennent dans ces deux contextes de précipitation de la silice dissoute.Le deuxième objectif de cette thèse était d’évaluer la possibilité de valoriser la silice extraite de l’eau géothermale de Bouillante dans un procédé de traitement des eaux naturelles par adsorption. Pour cela, les propriétés d’adsorption de la silice géothermale brute et fonctionnalisée par le poly(ethylèneimine) (ou PEI) ont été étudiées pour deux polluants : un colorant, le bleu de méthylène et un métal lourd, le plomb. Les résultats obtenus montrent que la silice brute possède une grande capacité d’adsorption vis-à-vis du bleu de méthylène. En outre, la fonctionnalisation de la silice par le PEI permet d’améliorer sa capacité d’adsorption vis-à-vis du plomb en solution, en accord avec un modèle cinétique du pseudo-second ordre suggérant une chimisorption. Le modèle d’isotherme de Redlich-Peterson est également en très bon accord avec les données expérimentales.
The hot geothermal fluid produced by the geothermal power plant of Bouillante (Guadeloupe) contains various dissolved components such as silica that can precipitate as solid deposits during their cooling and cause serious problems on the electricity generation. One of the aim of this study is to improve the understanding on the physical, chemical and kinetics conditions of the amorphous silica precipitation in the Bouillante geothermal field. After a study on the physical and chemical characteristics of the Bouillante fluids and deposits which can form during their exploitation, experiments on the kinetics of silica precipitation, on site, under a large range of temperature (25 – 90°C) and pH (4 – 12) have been carried out and analyzed in detail.During on site kinetics experimentations only dissolved silica polymerization (reversible) as colloidal gel, very stable in solution, was observed. Modeling of the experimental data showed that the kinetics polymerization is characterized by a 2-order kinetic law relative to dissolved silica until the equilibrium that is consistent with silica dimerization. On the other side, the initial stage of the reaction is better characterized by a 4-order kinetic law that suggested more complex polymerization reactions with tetramers formation.Temperature has a little effect on the polymerization kinetics compared with the pH which has an effect more important. The activation energy of silica precipitation calculated between 25 and 90°C, is about 41 - 54 kJ for pH ranging to 5 - 8.The characterization of the silica precipitate reveals significant differences in the porous structure of the silica collected on the surface installations and the one obtained from kinetic experiments that suggests different precipitation mechanisms. The second objective of this thesis was to evaluate the possibility to promote geothermal silica for the treatment of natural waters containing contaminants by adsorption. Adsorption properties of the untreated and functionalized by poly(ethylèneimine) (ou PEI) geothermal silica have been investigated for two pollutants: a colorant, the methylene blue and a heavy metal, the lead.Results showed that untreated silica has a great adsorption capacity concerning the methylene blue. Besides, silica functionalization by the PEI allows improving the adsorption capacity for lead in solution. The adsorption kinetics curves followed a pseudo-second order model consistent with a chimisorption. The isotherm model of Redlich-Peterson fitted well the experimental data.

http://www.theses.fr/2014AGUY0698/document

Éditeur(s) : HAL CCSD
Résumé : EGU2012-6377- Geophysical Research Abstracts vol. 14
The hot geothermal fluid produced by the wells of the Bouillante power station, in Guadeloupe, contains various dissolved species such as silica or some metals (Zn, Pb, etc). During the exploitation, the geothermal fluid is flashing and cooling (from 260 to 160°C for the high-pressure steam-liquid separation and down to 110°C for the low-pressure phase separation of a part of the separated liquid at 160°C). Consequently, the dissolved species can form scale deposits such as amorphous silica or poly-metallic sulphides, according to the exploitation conditions, and cause serious scaling problems on the production and the surface installations. These minerals could also precipitate during the partial underground re-injection of the production fluids which is being set up in the Bouillante power station. In this study, in order to predict and prevent the possible silica precipitation at temperature lower than 160°C, during the partial underground reinjection of the production fluids of Bouillante or their thermal valorization down to 110°C temperatures, we propose to investigate on site the kinetics of silica precipitation as a function of temperature and pH. The experiments presented here were carried out on site on samples of separated waters collected after the steam-water separator at 160°C, containing about 600 ppm of SiO2, at four cooling temperatures: 22, 50, 75 and 90°C, and for pH ranging from 4 to 9. These experiments showed that the silica deposition was always initiated by a polymerization mechanism characterized by an order 2 kinetic law and the formation of a white colloidal gel, which slowed down the silica precipitation under solid form. This latter was observed much later, after the polymerization stage, and only in particular conditions (long time of atmospheric exposure, water stagnation,. . . ). The results also confirmed that the silica precipitation kinetics is strongly dependent on pH. In acidic solution, a transition period is observed before the beginning to the silica polymerization. At neutral-basic pH, there is no transition period and the rate of polymerization is maximal for pH close to 8. The undergoing modeling of these experimental data and specific surface area measurements on the colloidal gel will allow us to determinate the kinetics parameters useful for the prediction and prevention of silica precipitation under the specific exploitation conditions of Bouillante power station. This work is financially supported by ADEME (French Agency for Energy and Environment), BRGM and UAG.
EGU General Assembly 2012
Vienne, Austria

hal-00697627
https://hal-brgm.archives-ouvertes.fr/hal-00697627

Éditeur(s) : HAL CCSD
Résumé : Avec la centrale de Bouillante, la Guadeloupe possède le seul site français de géothermie haute énergie conventionnelle. Le principe de fonctionnement est simple : des forages de production artésiens permettent la remontée naturelle d'une saumure à haute température. En surface la baisse de pression entraîne la vaporisation du fluide produit. Vapeur et eau sont ensuite séparées. La vapeur qui emmagasine une partie du contenu énergétique du fluide est turbinée .pour la production d'électricité. L'eau chaude n'est pas exploitée. Une partie est rejetée à la mer après refroidissement, l'autre est réinjectée dans le réservoir. Le réservoir est un milieu perméable (roches fracturées) rempli d'une saumure dont les conditions de température et pression sont très variables. La présence de fumerolles en surface atteste que certaines zones sont diphasiques sur le pourtour du champ, aux conditions atmosphériques. Lorsque l'on considère la source de chaleur du système hydrothermal, on doit prendre en compte des gammes de température et pressions pouvant aller jusqu'à 1000°C et une centaine de MPa avec un fluide potentiellement supercritique. Le problème est défini par les équations de conservation de la masse et de l'énergie, par la loi de Darcy et par les lois d'état obtenues à partir d'une implémentation libre des tables d'état IAPWS-IF97 (Freesteam). On rajoutera ultérieurement une loi de conservation du sel et les tables thermodynamiques associées pour modéliser le comportement de la saumure exploitée à Bouillante. On a choisi comme variables principales la pression et l'enthalpie pour des raisons de stabilité par rapport aux lois d'états. Les équations étant essentiellement hyperboliques on a retenu des schémas volumes finis pour la discrétisation. À ce jour nous testons différentes méthodes dans le but de comprendre le comportement des équations dans le cadre de la mise en place du champ géothermal à l'échelle géologique (" état naturel " du champ).
19ème Conférence Géologique de la Caraïbe
Le Gosier, Guadeloupe, France

hal-00609480
https://hal-brgm.archives-ouvertes.fr/hal-00609480

Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of our study is to model a geothermal reservoir. When geothermal reservoir are assumed to be composed of pure water, the transfer of mass and energy is classically described by two balance equations: mass balance equation and the energy balance equation. In addition to those equations, fluid velocity ist classically given by the Darcy law while thermodynamic properties, inferred from theoretical or empirical equations of state, are used to close the mathematical system. Once this system is closed, there exist different solutions. The first one is to solve for pressure and temperature with a variable switch to saturation in the two-phase region (e.g. TOUGH2). The second one is to solve for pressure and enthalpy to increase stability of phase transition between single and two-phase states (e.g. Hydrotherm). We adopted the second option and chose te use a splitting method to get rid of the complexity of coupling equations and a finite volume method for the spatial discretization. Selecting object-oriented languages, we developed a multi-language framework, combining Python, Fortran and a C++ implementation of IAPWS (from the freesteam project) including the supercritical equations, in porous media velocity is given by Darcy law and to close the system physical properties are determined by the IAPWS-IF97 thermodynamic formulation. We resolve the equations in pressure and enthalpy instead of pressure and temperature in order to increase stability and to handle easier the passage from a single-phase to a two-phase system. We solve the system by using a splitting method - to get rid of the complexity of coupling equations - and a finite volume method. We offer some freedom to users thanks to the implementation of several methods like explicit or implicit Euler, Runge-Kutta or BDF2 for time solvers or GMRES and BICGSTAB for the linear solver. We can handle several boundary conditions like no-flow - describing a boundary which can not exchange matter with the exterior - or like a mixed-therm condition - a Dirichlet condition to the pressure and a Dirichlet or an outflow condition to the temperature in order to describe a recharge or a discharge zone - ... We're developing a multi-language framework, combining Python, Fortran and the C++ implementation of IAPWS (from the freesteam project). All these languages are object-oriented. We've applied this simulation model to the dogger in Paris, France, to several one-dimensional systems and a two-dimensional one made by Coumou with the CSMP++ platform. The dogger is a reservoir exploited to produce heat by pumping water at 70 and reinjecting it in the reservoir at 40. In the one-dimensional systems we wanted to observe the process of heat transfer from a higher temperature boundary to a smaller one in a high-energy domain. The last simulation shows the natural convection of water in a fault. For every simulation we compared the solutions we found with an other code (TOUGH2 or CSMP++) and they agreed. The next step will be to model the geothermal plant in Guadeloupe, West Indies. It's the only place in France - and in the West Indies so far - producing electricity with the earth power. The temperature can reach up to 1000 and the pressure range is around a few hundreds MPa. In some surface zones we can see two-phase water at atmospheric pressure. In the 1980s Bouillante was a laboratory for France. Since 1995 Bouillante has given 30GWh electricity a year to the Guadeloupeans.
PROCEEDINGS, Thirty-Ninth Workshop on Geothermal Reservoir Engineering
Stanford, United States

Droits : info:eu-repo/semantics/OpenAccess
hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133/document
https://hal-brgm.archives-ouvertes.fr/hal-00944133/file/Copol.pdf

Éditeur(s) : HAL CCSD Advisory Council on Underwater Archaeology
Résumé : International audience
On 18 December 1809 under the pressure of an English fleet, two Napoleonic Period store-ships, corvettes de charge,were sunk in Anse à la Barque on the west coast of Guadeloupe (FWI), south of the town of Bouillante. Underwaterarchaeological excavations, took place between 2001 and 2008. these investigationsrevealed that, in addition to those two shipwrecks, hulls of four different ships were also present on the seafloor. Twoof them have been identified as the French vessels Seine and Loire by comparing archival data to the archaeologicalrecord. The presence of so many shipwrecks in a secondary mooring of the west coast of Guadeloupe is explained by itstopographical characteristics and its proximity to Basse-Terre.
ACUA Underwater Archaeology Proceedings 2010

hal-01443280
https://hal.archives-ouvertes.fr/hal-01443280
https://hal.archives-ouvertes.fr/hal-01443280/document
https://hal.archives-ouvertes.fr/hal-01443280/file/ACUA%20Proceedings%202010%20JS%20Guibert.pdf

Éditeur(s) : HAL CCSD
Résumé : 1 page
The main aim of this study, co-funded by BRGM, Regional Council of Guadeloupe, European Union, ADEME and UAG, was to examine the silica deposition mechanisms and estimate their deposition kinetics at acidic and basic pH conditions, during the cooling from 260 to 25°C of separated waters, discharged from production wells, located in the Bouillante geothermal field. The acquisition of this type of information is very useful not only for the geothermal exploitation but especially, if production fluids are re-injected in the ground, as this is envisaged in the Bouillante geothermal field. The different on site experiments showed that, in these conditions, the silica deposition was always initiated by a silica polymerization mechanism and the formation of a white colloidal gel, which slowed down the silica precipitation. In agreement with the literature data, this polymerization mechanism is characterized by an order 2 kinetic law, strongly dependant on pH. The determination of the specific surface area by specific mercury porosimetry for this gel (250 m2/g) in the UAG laboratories, allowed estimating the corresponding kinetic constant at 25°C. Other experiments at different final temperatures (50, 75 and 100°C) are necessary in order to define this constant as a function of the temperature. The silica precipitation under amorphous silica form was observed much later, after the polymerization stage, and only in particular conditions (long time of atmospheric exposure, water stagnation...). The pH of the Bouillante geothermal fluid is estimated to be close to 5.3±0.3, at 260°C, in the reservoir conditions. If this parameter, very influent on the kinetics of silica deposition, can be preserved at values less than 7 during the re-injection of the production fluids in the ground at relatively high temperatures (150-160°C), it is strongly probable that no chemical treatment is necessary to avoid silica precipitation.
19ème Conférence Géologique de la Caraïbe - 2011
Gosier, Guadeloupe, France

hal-00575943
https://hal-brgm.archives-ouvertes.fr/hal-00575943

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
In this paper, we provide the first structural map of Les Saintes archipelago (Guadeloupe, Lesser Antilles). The finite strain pattern displays four families of fault systems characterized by their statistical structural orientations: N000-N020, N050-N070, N090-N110 and N130-N140 trending fault systems. Our onshore results thus underline a fault network much more complex than the one depicted by the previous offshore geophysical investigations around Les Saintes archipelago, which show only N120-N150 trending system. According to the available K-Ar dating of the volcanic rocks and the relative chronology of the faults defined in the field, we determine the deformation history in Les Saintes islands since the last 3 Ma. The four highlighted trending fault systems are already active since the Pliocene and are consistent with the present-day extensional tectonics in the Guadeloupe archipelago compatible with the reactiva-tion of inherited structures at the active arc scale. We interpret the tectonic evolution of Les Saintes islands as the result of interplay between subduction of aseismic ridges (Tiburon and Barracuda ridges) and oblique convergence. Furthermore , we recognized an exhumed geothermal paleo-system in Terre-de-Haut island which is a good analogue of the present-day active Bouillante geothermal system. Its duration is estimated at 400 k.y. during the Pliocene.
EISSN: 1777-5817

hal-01625778
https://hal.univ-antilles.fr/hal-01625778
https://hal.univ-antilles.fr/hal-01625778/document
https://hal.univ-antilles.fr/hal-01625778/file/VeratIEtAl_Final.pdf
DOI : 10.2113/gssgfbull.187.1.3