Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To test the impact of fluid flow on the reactivity of porous (ultra-)mafic rocks, reactive percolation experiments were realized during which CO2-enriched water was injected at two different injection rates (Q = 0.1 and 1 mL h−1) through sintered analogues of olivine-accumulation zones in basaltic flows at temperature and fluid composition conditions (T = 180 °C; NaHCO3 buffered solution) favorable for CO2-mineralization (carbonation).All experiments resulted in silicate dissolution, carbonate precipitation upstream and (proto-)serpentine formation downstream indicating a decrease in the fluid reactivity along flow paths. The measured bulk carbonation rates ranged from 4 to 7 × 10−8 s−1; these values were significantly lower than previously published values of olivine carbonation rate obtained on powders in closed batch and flow-through reactors. Our study show complex couplings, at pore scale, between fluid flow, localization of reaction zones, and chemical reaction kinetics which in turn control hydrodynamic properties, carbonation rate and efficiency and fluid reactivity. This results in carbonation rates being higher when injection rates are high and permeability ultimately controlling carbonation reactions by limiting fluid input. During experiments, notable changes in permeability occurred for only minor changes in porosity indicating a control by the geometry of the porous network: heterogeneities in the distribution of flow paths favored the localization of precipitated minerals which in turn resulted in the closure of flow paths. This mechanism was particularly efficient at low injection rates. These results imply that controlling the injection rate could allow enhancing/limiting the efficiency of in situ carbonation.
ISSN: 0883-2927

hal-01115284
https://hal.archives-ouvertes.fr/hal-01115284
DOI : 10.1016/j.apgeochem.2014.11.024

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
In situ mineralization of CO2 in ultramafic rock-hosted aquifers is one of the promising solutions for decreasing CO2 concentrations in the atmosphere. Naturally altered ultramafic rocks suggest that carbonation processes are controlled by local heterogeneities in the structure of the rock and fluid transport at the water-rock interfaces. We studied the role of rock crystallographic anisotropy relative to the global fluid flow direction on the mineralization of CO2 by means of electron microscope analyses from the macro- to the micrometer scale (EBSD-FIB). The sample used for the measurements was a hot pressed olivine core percolated by water enriched in CO2 (pCO2 = 10 MPa) at 180 °C. During the percolation experiment, olivine was dissolved and two types of carbonates, dolomite, and magnesite, were precipitated on olivine surfaces. The results showed that the dissolution of olivine is controlled by its crystallographic properties as shown by the development of etch-pits only on the (010)ol planes and with elongated shapes parallel to the [010]ol axes. In contrast, the precipitation of carbonates is governed by hydrodynamic properties. Carbonates are heterogeneously distributed in the percolated rock. They are mainly located along the moderate (for dolomite) and the minor (for magnesite) flow paths, both oriented parallel to the principal fluid flow direction, which allow carbonates to be supplied with divalent cations (e.g., Ca2+, Mg2+, and Fe2+). In these flow paths, carbonate growth is systematically oriented normal to the flow that facilitates the development of chemical gradients with cationic supersaturation conditions for carbonate precipitation near the walls.In natural systems, the (010)ol planes are parallel to the Moho and the (100)ol planes are vertical; our study suggests that flow of CO2-rich fluids will induce precipitation of carbonates localized along, and preferentially clogging, vertical flow paths while favoring olivine dissolution along horizontal fluid pathways. This dual control of structure and fluid flow on carbonation mechanisms could be an important parameter allowing sustainable CO2 storage in peridotites, while limiting the risks of leakage toward the surface.
ISSN: 0003-004X

hal-01143393
https://hal.archives-ouvertes.fr/hal-01143393
DOI : 10.2138/am-2015-4913

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Carbonation of peridotite is a widespread process in nature, with emerging societal and environmental implications through geological storage of CO2. We studied the micro- and nano-scale structures associated with the carbonation of peridotite pervaded by a CO2-rich water and the induced changes of its hydrodynamic properties. Focused ion beam (FIB) nanotomography was coupled with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations. An experimental sample of dunite core percolated by a CO2-rich fluid (pCO2 = 11 MPa) at 160 °C was compared with a naturally carbonated sample from the Atlantic Ridge (Exp. IODP 304). Results of the 8-days percolation experiment show continuous alteration of olivine into magnesite locally associated with a poorly crystalline serpentine-type mineral referred to as proto-serpentine. The experiment is also characterized by an overall decrease in rock porosity (from 7.7 to 6.4%) and permeability (from 8.5 × 10− 16 to 1.7 × 10− 16 m2). The primary inter-granular porosity (1 to 10 μm) is progressively filled with magnesite, leading to the overall decrease of permeability. At the same time, a secondary small-scale porosity (10 nm to 1 μm) is created at the tip of the dissolution features along the (010) cleavage planes of olivine grains. Carbonate crystals grow within these etch-pit structures behind the dissolution front. Dissolution and precipitation occur at a relative rate that maintains the secondary porosity over the timescale of the experiment (i.e. carbonate growth has to be the slowest one). This process is interpreted as an interface coupled dissolution-precipitation mechanism of olivine carbonation. Proto-serpentine is only formed in highly reduced flow areas, such as small olivine etch-pits (10 to 500 nm wide), which are more isolated from CO2 input. SEM-FIB analyses show the 3D preferential orientation of the dissolution-precipitation planes within a given olivine grain. It suggests the formation of lateral connections between the etch-pits (infra-micrometric “channels”) providing access to reactants and removing reaction products at the reaction sites. The experimental results show that olivine dissolution and magnesite precipitation converge to a quasi-steady state resulting in a constant carbonation rate controlled by reaction kinetics and not by mass transfer for this flow regime. The system self-regulates, independently of the porosity change at least during this incipient stage of olivine carbonation. Similar textures are observed in natural samples collected at 170 m-depth in the vicinity of veinlets driving late fluids down into the cooling oceanic lithosphere. This suggests that similar mechanisms are active in nature and can play an important role in the late, low temperature alteration stages of fractured peridotite. These results also highlight the critical role of nm-scale spatial arrangement of dissolution and precipitation features on mass transfers and on the sustainability of olivine carbonation through coupled dissolution-precipitation processes.
ISSN: 0009-2541

hal-01684733
https://hal.archives-ouvertes.fr/hal-01684733
DOI : 10.1016/j.chemgeo.2017.11.013