Éditeur(s) : HAL CCSD
Résumé : The present study addresses the question of increasing need in water supply. One line of research consists in investigating karst aquifers that represent significant water supplies for the areas around the Mediterranean. This work aims at developing a methodology of predictive evaluation of karst distribution and karst thickness within the carbonate massifs. It is based on the study of the Tethysian carbonate platform from the area of Montpellier, South of France. This area underwent a polyphased, complex, tectonic evolution, involving successive karst forming events. The approach is based on the relationships between eustacy and geodynamics, on one hand, and base-level variation recorded within palaeokarsts, on the other hand. Sedimentary fill of palaeokarsts allows to identify distinct karstification phases and sometimes to date them. It is a marker of base-level variations, which we attempt to quantify, that is responsible for karst formation and karst filling and sealing. For three palaeokarsts of regional extent, we analyze : karst sedimentary-fill, the distribution along upstream-downstream profile, the vertical extension of palaeokarsts, indicative of the base-level lowering. - The " Bauxite palaeokarst " results from the two-stage evolution of the " Isthme Durancien " : i) Bauxitic weathering of the Neocomian cover over the southern Massif Central , related to an inversion during Barremian ; ii) ≥1600 m uplift and exhumation during Aptian-Albian, inducing erosion of alterites, upstream, and deposition of detrital bauxites, downstream. - The " Early Paleocene palaeokarsts with marine sedimentary-fill " indicate base level variations of more than 350m in the upstream area. It is suggested here that such base-level variations, exceeding eustacy and recorded in tabular undeformed series, result from desiccation-flooding events in an endoreic silled basin. - The " Miocene palaeokarst with Cevennes-sourced sediment-fill " records a Serravalian-Tortonian base-level drop, depicted by canyon incision in the hinterland of the Gulf of Lion Margin. Uplift values of ≥ 400m upstream, about 250m in an intermediate area and 10's of m downstream, are measured. The present 3D geometry and distribution of carbonate massifs (exposed and covered) are modeled in the study area, from the Cevennes to the Mediterranean. The 3D geological model integrates seismic reflection, borehole and gravimetric data. Tectonic restoration of a N-S section, extracted from the 3D model, allows to reconstruct paleo-base-levels with respect with the carbonate massifs, at different stages of deformation and successive phases of karstification. The 3D paleo-flows through carbonates across the study area, are thus constrained, especially during the Messinian desiccation stage. Application of the results to hydrogeology leads to the following : - Uplift of upstream hinterland (Cretaceous, Miocene) produces large amplitude karsts, but they do not make significant reservoirs. - Karstification responsible for the development of important and deep karst reservoirs is related to desiccation of endoreic basins (early Paleocene and Messinian). - Theses two events have produced two main deep karst reservoirs, with a gravimetric signature : (1) Upstream of Montpellier Thrust, between Pic St Loup, Les Matelles Fault and Hérault Basin, a deep karsts developed over 900m thickness in the Malm limestone, during Paleocene. (2) Downstream (south) of Montpellier Thrust, the coastal karsts extend offshore over more than 10km, they are sealed by a thick Miocene to Quaternary cover, and they result from the Messinian event.
Cette étude s'inscrit dans un contexte de demande croissante en ressources en eau, conduisant à mieux contraindre et estimer la distribution des aquifères karstifiés qui représentent une ressource importante, notamment sur le pourtour méditerranéen. Le but de ce travail est d'élaborer une méthode prédictive de la distribution de la karstification et de l'épaisseur de massifs carbonatés karstifiés, notamment pour les karsts profonds. La méthodologie est développée à partir de l'étude des karsts de la plateforme carbonatée téthysienne du Languedoc montpelliérain; région qui a subi une histoire tectonique complexe et polyphasée, entrainant des phases de karstification successives. Elle est basée sur la compréhension des relations entre eustatisme, géodynamique et niveau de base, enregistrées par les paléokarsts de la région. Le remplissage sédimentaire des paléokarsts permet d'identifier les épisodes de karstification et de les dater ; c'est un marqueur des variations -que l'on cherche à quantifier- du niveau de base local responsable de la formation et du comblement des karsts. On analyse 3 paléokarsts d'extension régionale dont on peut étudier : le remplissage karstique, la distribution le long de profils amont-aval et l'extension verticale indicatrice de l'amplitude de l'abaissement du niveau de base dont il est issu. On en déduit les causes géodynamiques à l'origine de leur formation: - Le " paléokarst des bauxites " à remplissage caractéristique, résulte de l'évolution en 2 phases de " l'Isthme Durancien " : altération bauxitique de la couverture néocomienne sur le sud du Massif Central, liée à une inversion au Barrémien, suivi d'une surrection ≥ 1600m à l'Aptien-Albien, causant l'érosion des altérites en amont et le dépôt des bauxites détritiques en aval. - Le " paléokarst à remplissage marin paléocène inférieur " indique des variations du niveau de base local ≥350m dans la zone amont sud-cévenole. On propose que ces variations de niveau de base d'amplitude très supérieures aux variations eustatiques et dans une zone faiblement déformée, résultent d'assèchements et d'ennoiements d'un bassin endoréique à seuil. - Le " paléokarst à remplissage détritique d'origine cévenole ", enregistre la chute du niveau de base au Serravalien-Tortonien, qui se traduit par l'incision de canyons dans l'arrière-pays de la marge du Golfe du Lion. On détermine une surrection de plus de 400 mètres à l'amont, près de 250m dans les blocs faillés intermédiaires et quelques dizaines de mètres dans la zone avale. En parallèle, on établit la géométrie et la distribution actuelles des massifs carbonatés dans la zone d'étude (y compris sous couverture), en construisant un modèle géologique 3D, des Cévennes à la Méditerranée. On intègre les données de sismique réflexion, de forages et les données gravimétriques. La restauration tectonique séquentielle d'une coupe Nord-Sud extraite du modèle géologique permet d'appréhender la position des paléo-niveaux de base par rapport aux massifs carbonatés, pour chaque époque de karstification. On déduit l'organisation 3D des paléo-écoulements à travers la géométrie complexe des massifs carbonatés languedociens, notamment pendant l'évènement messinien. En terme d'évaluation de la ressource en eau, on déduit que: - Les surrections de l'arrière-pays (Crétacé " moyen ", Miocène) produisent des karsts de grande amplitude, mais ne constituent pas de réservoirs significatifs. - La karstification à l'origine de réservoirs exploitables importants et profonds est créée par l'assèchement de bassins endoréiques, qui ont affecté la région au Paléocène inférieur et au Messinien . - Ces deux évènements sont à l'origine de deux principaux réservoirs karstiques profonds qui ont une signature gravimétrique : (1) En amont du chevauchement de Montpellier, entre le Pic Saint Loup, la faille des Matelles et le bassin de l'Hérault, le karst profond se développe sur une épaisseur atteignant 900m, et est attribuée à l'événement du Paléocène. (2) Au Sud du chevauchement de Montpellier les karsts côtiers s'étendent jusqu'à plus de 10 km au large, scellés par une épaisse couverture Miocène et Plio-Quaternaire, et résultent de l'événement Messinien.
https://tel.archives-ouvertes.fr/tel-00936257

tel-00936257
https://tel.archives-ouvertes.fr/tel-00936257
https://tel.archives-ouvertes.fr/tel-00936257/document
https://tel.archives-ouvertes.fr/tel-00936257/file/thA_se_husson_couleurs.pdf

Éditeur(s) : HAL CCSD Society of Economic Geologists
Résumé : International audience
The ~8-Moz Sadiola Hill gold deposit is located in the Kédougou-Kénieba inlier, a window of deformed ca. 2200 to 2050 Ma rocks that crop out in eastern Senegal and western Mali. The geology of the inlier differs from other Paleoproterozoic granite-greenstone belts and sedimentary basins by the abundance of carbonate rocks. The Sadiola Hill gold deposit occurs within 3 km of the Senegal-Mali shear zone, and country rocks in the region have undergone polycyclic deformation. The lithostratigraphy of the open pit consists of impure limestones overlain by younger sequences of detrital sedimentary rocks, which include arenite, wacke, and siltstone. The sedimentary rocks have been subjected to regional greenschist-facies metamorphism and have been intruded by multiple generations of synkinematic, calc-alkaline stocks and dikes. The bulk of the ore is hosted within a N-S- to NNW-trending, 10- to 50-m-wide, brittle-ductile dilational shear zone defined as the Sadiola shear zone. Gold lodes also occur along an array of steep NNE-trending shear zones. Geometric and kinematic analyses indicate that the ore-hosting structures were undergoing sinistral displacement at the time of mineralization, locally defined as the D3s NNW-SSE-shortening event. Hydrothermal alteration is polyphase and includes an early high-temperature calc-silicate phase (i.e., porphyroblastic growth of actinolite-tremolite) followed by a potassic phase (i.e., biotite-calcite-quartz ± K-feldspar-tourmaline-actinolite) that was synchronous with ore mineral deposition. Paragenetic studies reveal a multistage ore development that includes an As-rich sulfide stage, followed by an Au-Sb stage. The ore is associated with a metal enrichment suite of Au-As-Sb ± Cu-Fe-W-Mo-Ag-Bi-Zn-Pb-Te. The Sadiola Hill deposit shares a similar relative timing and structural setting to that of other world-class orogenic gold systems in the West African craton (e.g., Ashanti, Loulo), with gold deposition occurring during a period of transcurrent tectonics, after the cessation of region-wide compressional deformation. The high-temperature paragenesis at Sadiola Hill is atypical of gold mineralization in the craton and indicates that the late Eburnean tectono-magmatic activity between ca. 2080 and 2060 Ma played an important role in the dynamics of hydrothermal fluid circulation along the Senegal-Mali shear zone.
ISSN: 0361-0128

hal-01583358
https://hal.archives-ouvertes.fr/hal-01583358
DOI : 10.2113/econgeo.112.1.23

Éditeur(s) : The Geological Society of London
Résumé : Conservational models, like simple shear, pure shear or polyphase models that exclude exchanges between the lower continental crust and upper mantle, are usually proposed to explain the lithospheric stretching and consequent crustal thinning of passive continental margins. These models need large amounts of horizontal movement, and have, therefore, important implications for plate kinematic reconstructions and intraplate deformation. In this paper we propose to show these implications in the Central Segment of the South Atlantic Ocean. In the Angola–Brazilian system, these models imply about 240 km of horizontal movement. This movement can be compensated by two end-member mechanisms: (1) an intraplate deformation located in Africa; and (2) an intraplate deformation located in South America. We detail for each solution the strong geological and geodynamical implications, and discuss the consequences for the genesis of passive continental margins.
Geological Society, special publication (0375-6440) (The Geological Society of London), 2012-02 , Vol. 369 , P. 75-90

Droits : The Geological Society of London 2012
http://archimer.ifremer.fr/doc/00087/19839/17757.pdf
DOI:10.1144/SP369.5
http://archimer.ifremer.fr/doc/00087/19839/

Éditeur(s) : HAL CCSD
Résumé : Today, one of the main challenges in the oil industry is the exploitation of new resources in naturally fractured reservoirs often located in structurally complex areas such as plate boundaries, mountain ranges or near salt structures. While numerical models of rock deformation based on continuum mechanics are becoming industry standard in providing efficient means for modelling natural fractures in reservoirs, the knowledge of past perturbed stress fields, which is referred as the type (normal, wrench or reverse), orientation and magnitude of the regional or local tectonic stresses that needs to be applied as boundary condition in numerical simulations, is often unknown or approximated.The essence of this thesis is to improve the recovery of the paleostress field needed to constrain numerical simulations. I first described and discuss through a comprehensive mechanically-based multi-parametric study how far we can rely on the commonly used paleostress inversion methods based on fault slip data and the Wallace and Bott assumptions. I then compared this method with a new generation technique based on geomechanics using field observations. Since slip markers on faults are hardly observed in core or image log, I used observed natural fracture data as main drivers for the inversion of the paleostress using geomechanically-based method. I demonstrated, through various outcrop and subsurface examples, how this can efficiently be done. Finally, I aimed at addressing the problem of polyphase fracture data sets with unknown mechanical type (joints, faults, stylolites ...) and expanded the mechanical stress inversion to the separation of tectonic phases.
Aujourd'hui, l'un des principaux défis dans l'industrie pétrolière est l'exploitation de nouvelles ressources dans les réservoirs naturellement fracturés souvent situés dans des zones structurellement complexes tels que les frontières de plaques, les chaînes de montagnes ou les structures de proches des dômes de sel. Alors que les modèles numériques de déformation des roches basée sur la mécanique des milieux continus fournissant des moyens efficaces pour la modélisation de fractures naturelles dans les réservoirs, sont devenus la norme dans l'industrie, les paléo-contraintes régionales ou locales appliquées comme condition aux limites dans les simulations numériques, définies par le régime (normal, décrochant ou inverse), l'orientation, et la magnitude des contraintes tectoniques, sont souvent inconnues ou approximées.L'essence de cette thèse est d'améliorer la prédiction du champ de paléo-contrainte nécessaire pour contraindre les simulations numériques. J’ai décrit dans un premier temps à travers une étude comparative multi-paramétrique complète basée sur la mécanique, dans quelle mesure nous pouvions compter sur les méthodes d'inversion des paléo-contraintes basées sur les hypothèses de Wallace et Bott et les données de glissement sur les failles. J’ai ensuite comparé ces méthodes avec une technique d’inversion de nouvelle génération basée sur la géomécanique en utilisant les observations de terrain. Puisque les marqueurs de glissement sur les failles sont rarement observés le long du forage, j’ai utilisé l’inversion géomécanique des contraintes pour les données de fractures naturelles observées. J’ai alors démontré, l’efficacité de cette technique à travers divers exemples d'affleurements et de subsurface. Enfin, j’ai proposé une solution afin de résoudre le problème des données de fractures polyphasées à type cinématique inconnu (joints, failles, stylolites ...) et étendu l’inversion de contrainte basée sur la géomécanique à la séparation des phases tectoniques.
https://hal.archives-ouvertes.fr/tel-01324110

tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110/document
https://hal.archives-ouvertes.fr/tel-01324110/file/theselejri.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Hengshan–Wutaishan area forms part of the Trans-North-China Belt developed in response to the final amalgamation of the North China Craton. The Hengshan–Wutaishan domain and the adjacent Fuping massif constitute the largest and the most representative rock exposure of the belt. A structural study allows us to redefine the lithological and tectonic units that compose the architecture of the Hengshan–Wutaishan domain and to propose that the Trans-North-China Belt was built up through a polyphase tectonic evolution within the period 1900–1800 Ma. The first event (D1) corresponds to the emplacement of lower and upper nappes herein called the Orthogneiss and Volcanites Unit (OVU) and the Low Grade Mafic Unit (LGMU), respectively. The OVU mainly consists of rocks formed in an arc system and metamorphosed under amphibolite facies conditions whereas the LGMU represents oceanic crust rocks with an arc component that underwent greenschist facies metamorphism. The syn-metamorphic D1 deformation is characterized by a NW–SE stretching and mineral lineation with a top-to-the SE sense of shear that corresponds to the sense of nappe motion. U–Th–Pb EPM chemical dating on monazite from three metapelites of the OVU gives isochron ages of 1884 ± 11 Ma, 1886 ± 5 Ma and 1887 ± 4 Ma interpreted as the age of the prograde amphibolite facies metamorphism coeval with nappe stacking during the D1 event. The D2 event corresponds to a widespread crustal melting of the OVU and underlying basement rocks in Hengshan related to the exhumation of deep structures about 20–30 Ma after nappe emplacement. The migmatite contains blocks of retrograded eclogite or HP-granulitic restites, and is characterized by the development of a pervasive foliation and lineation. A late D2 event represents the folding stage of the migmatitic foliation during the completion of a dome. The Orthogneiss and Volcanics Unit and the Low Grade Mafic Unit are unconformably covered by weakly metamorphosed to unmetamorphosed sediments belonging to the Hutuo Supergroup. These rocks were deformed by a ductile D3 event, characterized by a NW–SE trending stretching lineation, south verging folds associated with an axial planar slaty cleavage and an E–W crenulation lineation. Lastly, a left-lateral wrenching along the Zhujiafang Shear Zone separates the northern and southern parts of Hengshan. Our structural study shows that there is no significant difference between the southern part of Hengshan and the lower part of Wutaishan, both areas belong to OVU and show a structural continuity. We suggest that this polyphase deformation developed in response to a north-westward subduction of an old ocean, named the Lüliang Ocean, beneath the Western Block, followed by collision with a micro-continent named the Fuping Block at not, vert, similar1890–1880 Ma.
ISSN: 0301-9268

insu-00151594
https://hal-insu.archives-ouvertes.fr/insu-00151594
https://hal-insu.archives-ouvertes.fr/insu-00151594/document
https://hal-insu.archives-ouvertes.fr/insu-00151594/file/Trap-PrecambrainResearch-2007.pdf
DOI : 10.1016/j.precamres.2007.03.001

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
Age constraints on the protoliths, deformation, metamorphism and melting events are key parameters when correlating different continental lithospheric remnants among each other and disentangling their evolution within large-scale orogens. In situ U-Th-Pb chemical dating on monazites using Electron Probe Micro-Analyser (EPMA) has been performed on eight samples throughout the Variscan Maures-Tanneron massif (SE France) in order to date the medium to high-tectonothermal events related to the Variscan orogeny.Results indicate a polyphased crustal evolution : (i) U-Th-Pb ages obtained in polygenetic monazite grain cores gave inherited Upper Ordovician (456 ± 11 Ma) age, highlighting the large scale occurrence of the Ordovician magmatic activity in the North Gondwanian margin. An Early Devonian (404 ± 10 Ma) age may date a protolith emplacement related to calc-alkaline supra-subduction magmatism or could be associated to an early medium-grade metamorphism, prior to collisional stage. (ii) The crustal thickening stage has been further recorded in prograde metamorphic monazites formed during the underthrusting and subsequent nappe stacking events, under amphibolite facies conditions. This stage is dated between 382 ± 11 (Middle Devonian) and 331 ± 5 Ma (Late Visean). (iii) An orogenic partial melting event took place during Middle Carboniferous and is accompanied by the crystallization of crustal peraluminous magmas (Plan-de-la-Tour granite, 329 ± 3 Ma).This contribution demonstrates the capacity of monazite to record the prograde path of rocks during increasing metamorphic conditions related to stages of crustal thickening, and the robustness of the U-Th-Pb chronometer in monazite despite the overprinting of high-grade thermal events, including partial melting. The age ranges of the different orogenic stages reported in this study are in good agreement with those reported in adjacent Variscan Corsica and Sardinia; while correlations with other nearest Variscan massifs like the Argentera massif in the southwestern Alps or the French Massif Central remain more hypothetic. The Internal Zone of the Maures-Tanneron massif, and more widely the Internal Zone of the Maures-Tanneron-Corsica-Sardinia segment, is part of the southern orogenic root system of the Variscan belt.
EISSN: 1777-5817

insu-01140973
https://hal-insu.archives-ouvertes.fr/insu-01140973
DOI : 10.2113/gssgfbull.186.2-3.145

Éditeur(s) : HAL CCSD
Résumé : This thesis is devoted to the study of the geodynamic evolution of the panafrican belt in NW Angola, lying on the western margin of the Congo craton. This orogenic belt, resulting from the late neoproterozoic - early paleozoic convergence of the São Francisco and Congo cratons, can be subdivided into two main domains: 1) an eastern foreland made of folded neoproterozoic sediments and 2) a western hinterland made of magmatic and metamorphic rocks. Our structural, petrological, geochemical and geochronological studies lead to the recognition of two main units within this hinterland : 1) an upper eastern unit made of gneiss and micaschists (PTmax : 8-12 kbar, 650-680°C) that preserves D1 deformation structures related to the ENE transport of nappes and 2) a western lower unit made of gneiss and migmatites (P-Tmax : 7-9 kbar, 700-750°C) that were affected by a polyphased deformation. Our geochronological study shows that this belt contains ~2Ga old granites that were involved in a polyphased panafrican evolution between 540 Ma for syn-D1 peak metamorphic conditions and 480 Ma for the last stages of recrystallization and exhumation of high grade rocks. The synthesis of all data leads to a precise reconstruction of P-T-D-t paths in both tectonometamorphic units and to comparison of this panafrican belt with similar belts distributed on both sides of the Atlantic ocean. This work attests of the complexity of the geodynamic processes resulting in the Gondwana assembly and implying both large cratonic landmasses and intercalated microplates.
Cette thèse est consacrée à l'étude de l'évolution géodynamique de la chaîne panafricaine au NW de l'Angola, sur la marge occidentale du craton du Congo. Ce segment orogénique, conséquence de la convergence des cratons du São Francisco et du Congo à la fin du Néoprotérozoïque et début du Paléozoïque, peut être subdivisé en un domaine externe plissé et peu métamorphique et un domaine interne formé de roches magmatiques et métamorphiques. Les études structurales, pétrologiques, géochimiques et géochronologiques conduisent à distinguer deux unités principales dans le domaine interne : - l'unité supérieure de gneiss et micaschistes (P-Tmax : 8-12 kbar, 650-680°C) dont la déformation D1 est synchrone de la mise en place des nappes vers l'ENE; - l'unité inférieure dans la partie occidentale constituée de gneiss et migmatites (P-Tmax : 7-9 kbar, 700-750°C) affectés par une déformation polyphasée. L'étude géochronologique démontre l'existence de protolithes granitiques datés à ~2 Ga impliqués dans l'orogénèse pan africaine caractérisée par une histoire polyphasée entre 540 Ma pour le pic du métamorphisme syn-D1 et 480 Ma pour les dernières phases de recristallisation et d'exhumation des roches métamorphiques de haut grade. La synthèse des données permet ainsi de reconstruire précisément les deux chemins P-T-D-t de ces deux unités tectono-métamorphiques et de comparer ce segment panafricain à ceux présents de part et d'autre de l'Atlantique Sud. Ce travail témoigne de la complexité des processus géodynamiques de convergence amenant à l'assemblage du Gondwana impliquant à la fois de larges masses cratoniques et des microplaques intercalées entre ces masses.
https://tel.archives-ouvertes.fr/tel-00770757

Droits : info:eu-repo/semantics/OpenAccess
tel-00770757
https://tel.archives-ouvertes.fr/tel-00770757
https://tel.archives-ouvertes.fr/tel-00770757/document
https://tel.archives-ouvertes.fr/tel-00770757/file/these2012-Nsungani.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the Schistes Lustres of Alpine Corsica (France) serpentinized mantle rocks are associated with continental basement and meta-volcanic/-seclimentary cover rocks. The relationships among these different lithologies are especially well exposed in the Monte San Petrone unit, where Alpine metamorphism reached lawsonite-eclogite conditions. The contact between serpentinites and slivers of continental basement, relatively flat-lying over several kilometers, is characterized by evidence of cataclastic deformation pre-dating Alpine High-Pressure ductile fabrics. The serpentinite/continental basement pair is stratigraphically overlain by metasediments with a typical Jurassic-Cretaceous supra-ophiolitic lithostratigraphy, with metaradiolarites passing upward to marbles and cal cschists. Noticeably, no evidence of cataclastic deformation is found in metasediments. These observations indicate that the lithostratigraphy of the Monte San Petrone unit was established during a pre-Alpine polyphase evolution, which culminated in extensive brittle deformation along a flat-lying detachment fault prior to the deposition of Jurassic sediments. We suggest that the inferred Mesozoic extensional tectonics were related to the opening of the Westem Tethys. The Mesozoic architecture of the Monte San Petrone area, which is typical of an Ocean-Continent Transition (OCT) zone, was preserved despite Alpine deformation and metamorphism, when the different lithologies (i.e. meta-ophiolites, continent-derived rocks and metasediments) underwent a common metamorphic evolution, culminating at T=490-550 degrees C and P= 2.2-2.6 GPa. Similar tectonostratigraphic associations are observed in other high-pressure terranes of Alpine Corsica, suggesting that inherited OCT-type domains may be common in Alpine-type orogens.
ISSN: 0024-4937

hal-00617744
https://hal.archives-ouvertes.fr/hal-00617744
DOI : 10.1016/j.lithos.2011.02.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this contribution we present a reconstruction of the overall lithotectonic architecture, from inner zones to external ones, of the Paleoproterozoic Trans North China Orogen, within the North China Craton. Moreover, forward thermobarometrical modeling on a kyanite-bearing gneiss yields a reliable prograde P-T-t-D path. In addition, 40Ar/39Ar dating on rocks from distinct litho-tectonic units helps us to distinguish several tectono-metamorphic events during the orogenic development. Considering these results, we propose a geodynamic model involving three cratonic blocks, namely the Western, Fuping and Eastern Blocks, separated by two oceans, the Lüliang and Taihang Oceans. The opening of oceanic basins occurred around 2.2-2.3 Ga. After the westward subductions of oceanic lithosphere, the Trans-North-China Orogen was built up through a polyphase tectonic evolution within the period 1900-1800 Ma. The first event (D1) corresponded to the emplacement of lower and upper nappes herein called the Orthogneiss-and-Volcanites Unit (OVU) and the Low-Grade-and-Mafic Unit (LGMU), respectively. The syn-metamorphic D1 deformation (1880 ± 10 Ma) is characterized by a NW-SE stretching and mineral lineation with a top-to-the SE sense of shear. During ongoing compression of the thickening orogenic crust, a second deformation event D2 (1850 ± 10 Ma) was responsible for (1) syn-anatectic lateral flow and exhumation of the orogenic root and (2) folding of the middle and upper parts of the orogenic wedge that consequently acquired a fan-type geometry. The late D3 (1830 ± 10 Ma) and D4 (1810 ± 10 Ma) events are related to late-orogenic normal and strike-slip shearing, respectively. In our present state of knowledge, the Paleoproterozoic Trans-North China Orogen might be regarded as the assemblage of two continent-continent collisional belts, both of which are characterized by nappe stacking accommodated by top-to-the E/SE ductile shearing. Continental subduction, crustal thickening, partial melting of overthickened crust, exhumation of HP rocks and deposition of syn-orogenic detrital basins are typical features of modern collisional-type orogens.
ISSN: 0301-9268

Droits : info:eu-repo/semantics/OpenAccess
insu-00628119
https://hal-insu.archives-ouvertes.fr/insu-00628119
https://hal-insu.archives-ouvertes.fr/insu-00628119/document
https://hal-insu.archives-ouvertes.fr/insu-00628119/file/Trap-PrecambrianResearch-2011.pdf
DOI : 10.1016/j.precamres.2011.09.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Fault affecting silicoclastic sediments are commonly enriched in clay minerals. Clays are sensitive to fluid–rock interactions and deformation mechanisms; in this paper, they are used as proxy for fault activity and behavior. The present study focuses on clay mineral assemblages from the Point Vert normal fault zone located in the Annot sandstones, a Priabonian-Rupelian turbidite succession of the Alpine foredeep in SE France. In this area, the Annot sandstones were buried around 6–8 km below the front of Alpine nappes soon after their deposition and exhumed during the middle-late Miocene. The fault affects arkosic sandstone beds alternating with pelitic layers, and displays throw of about thirty meters. The fault core zone comprises intensely foliated sandstones bounding a corridor of gouge about 20 cm thick. The foliated sandstones display clay concentration along S–C structures characterized by dissolution of K-feldspar and their replacement by mica, associated with quartz pressure solution, intense microfracturation and quartz vein precipitation. The gouge is formed by a clayey matrix containing fragments of foliated sandstones and pelites. However, a detailed petrographical investigation suggests complex polyphase deformation processes. Optical and SEM observations show that the clay minerals fraction of all studied rocks (pelites and sandstones from the damage and core zones of the fault) is dominated by white micas and chlorite. These minerals have two different origins: detrital and newly-formed. Detrital micas are identified by their larger shape and their chemical composition with a lower Fe–Mg content than the newly-formed white micas. In the foliated sandstones, newly-formed white micas are concentrated along S–C structures or replace K-feldspar. Both types of newly formed micas display the same chemical composition confirmed microstructural observations suggesting that they formed in the same conditions. They have the following structural formulas: Na0.05 K0.86 (Al 1.77 Fe0.08 Mg0.15) (Si3.22 Al0.78) O10 (OH)2. They are enriched in Fe and Mg compared to the detrital micas. Newly-formed chlorites are associated with micas along the shear planes. According to microprobe analyses, they present the following structural formula: (Al1,48 Fe2,50 Mg1,84) (Si2,82 Al1,18) O10 (OH)8. All these data suggest that these clay minerals are synkinematic and registered the fault activity. In the gouge samples, illite and chlorite are the major clay minerals; smectite is locally present in some samples.In the foliated sandstones, Kubler Index (KI) ((001) XRD peak width at half height) data and thermodynamic calculations from synkinematic chlorite chemistry suggest that the main fault deformation occurred under temperatures around 220 °C (diagenesis to anchizone boundary). KI measured on pelites and sandstones from the hanging and footwall, display similar values coherent with the maximal burial temperature of the Annot sandstones in this area. The gouge samples have a higher KI index, which could be explained by a reactivation of the fault at lower temperatures during the exhumation of the Annot sandstones formation
ISSN: 0191-8141

hal-01172423
https://hal.archives-ouvertes.fr/hal-01172423
DOI : 10.1016/j.jsg.2015.03.012