Éditeur(s) : HAL CCSD Springer/Terra Scientific Publishing Company
Résumé : International audience
We report oil the discovery of magnetite nanoparticles ranging in size from 2 to 14 full in the mineralized zones of the Pena Colorada iron-ore deposit, southern Mexico. Micrometric scale magnetite was magnetically reduced and divided into distinct size ranges: 85-56 mu m, 56-30 mu m, 30-22 mu m, 22-15 mu m, 15-10 mu m, 10-7 mu m and 7-2 mu m. Nanometric-scale magnetite in the size range 2-14 nm was identified. The magnetite was characterized by X-ray diffraction, transmitted and reflected light microscope, high-resolution transmission electron microscopy (TEM), high angle annular dark field, Mossbauer spectroscopy and its magnetic properties. Crystallographic identification of nanostructures Was performed using high-resolution TEM. Characteristic changes were observed when the particles make the size transition from micro- to nanometric sizes, as follows: (1) frequency-dependent magnetic Susceptibility percentage (chi FD%) measurements Show high Values (13%) for the 2-14 nm fractions attributed to dominant fractions of superparamagnetic particles; (2) variations of chi FD% < 4.5% in fractions of 56-0.2 mu m occur in association with the presence of microparticles formed by magnetite aggregates of nanoparticles (< 15 nm) embedded in berthierine; (3) Mossbauer spectroscopy results identified a superparamagnetic fraction; (4) nanometric and 0.2-3 mu m grain size magnetite particles require a magnetic field up to 152 mT to reach saturation during the isothermal remanent magnetization experiment; (5) coercivity and remanent magnetization of the magnetite increase when the particle size decreases, probably due to parallel Coupling effects; (6) two-magnetic Susceptibility versus temperature experiments of the same 2-14 nm sample show that the reversibility during the second heating is due to the formation of new magnetite nanoparticles and growth of those already present. during the first heating process.
ISSN: 1343-8832

hal-00413053
https://hal.archives-ouvertes.fr/hal-00413053

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This work focuses on the analysis of a unique set of seismological data recorded by two temporary networks of seismometers deployed onshore and offshore in the Central Lesser Antilles Island Arc from Martinique to Guadeloupe islands. During the whole recording period, extending from January to the end of August 2007, more than 1300 local seismic events were detected in this area. A subset of 769 earthquakes was located precisely by using HypoEllipse. We also computed focal mechanisms using P-wave polarities of the best azimuthally constrained earthquakes. We detected earthquakes beneath the Caribbean forearc and in the Atlantic oceanic plate as well. At depth seismicity delineates the Wadati-Benioff Zone down to 170 km depth. The main seismic activity is concentrated in the lower crust and in the mantle wedge, close to the island arc beneath an inner forearc domain in comparison to an outer forearc domain where little seismicity is observed. We propose that the difference of the seismicity beneath the inner and the outer forearc is related to a difference of crustal structure between the inner forearc interpreted as a dense, thick and rigid crustal block and the lighter and more flexible outer forearc. Seismicity is enhanced beneath the inner forearc because it likely increases the vertical stress applied to the subducting plate.
ISSN: 0040-1951

hal-01052679
https://hal.archives-ouvertes.fr/hal-01052679
DOI : 10.1016/j.tecto.2011.08.006

Éditeur(s) : HAL CCSD Landes Bioscience
Résumé : International audience
In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
Autophagy

hal-00735751
https://hal.archives-ouvertes.fr/hal-00735751
PUBMED : 22966490

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present a new set of brittle microtectonic measurements carried out in the Pliocene and Quaternary rocks outcropping in several key sectors of the western Betic and Rif orogen, the so-called Gibraltar orogenic arc. This data set, along with available earthquake focal mechanisms and borehole breakouts, allowed us to compile the Pliocene and Quaternary stress map of this area. This map provides new constraints for tectonic models and the present-day tectonic activity of the proposed active eastward subduction of oceanic lithosphere beneath the Gibraltar Arc and roll-back. The horizontal maximum compressive stress (S-Hmax) is NW-SE in the Betic Orogen and N-S/NNW-SSE in the southern Rif Cordillera. There is a significant consistency between S-Hmax and the displacement field deduced from GPS measurements with respect to the African plate: both appear to reflect the NW-SE convergence between the African and the European plates that is perturbed in the Rif. We propose that part of the eastern Rif behaves as a quasi-rigid block welded to the stable African plate. This block is bounded by important faults that localized most of the deformation disturbing the stress and surface displacement field. Pliocene to Quaternary N-S to NW-SE Africa-Europe plate convergence seem to be associated to the reorganization of the remnant Early Miocene subduction system in a continental-continental collision framework. Three-dimensional reconstruction of available seismic tomography plotted against the intermediate seismicity shows that only part of the old subduction system, whose orientation ranges from N20 degrees E to N100 degrees E, remains active: the portion ranging from N30 degrees E to N40 degrees E, orthogonal to the regional convergence. (C) 2011 Elsevier Ltd. All rights reserved.
ISSN: 0264-3707

hal-00671033
https://hal.archives-ouvertes.fr/hal-00671033
DOI : 10.1016/j.jog.2010.12.003

Éditeur(s) : HAL CCSD
2012 AGU Fall Meeting

hal-00771546
https://hal-mines-paristech.archives-ouvertes.fr/hal-00771546

Éditeur(s) : HAL CCSD Wiley
Résumé : [b]1.[/b] Plant functional traits, in particular specific leaf area (SLA), wood density and seed mass, are often good predictors of individual tree growth rates within communities. Individuals and species with high SLA, low wood density and small seeds tend to have faster growth rates.[br/][br/][b]2.[/b] If community-level relationships between traits and growth have general predictive value, then similar relationships should also be observed in analyses that integrate across taxa, biogeographic regions and environments. Such global consistency would imply that traits could serve as valuable proxies for the complex suite of factors that determine growth rate, and, therefore, could underpin a new generation of robust dynamic vegetation models. Alternatively, growth rates may depend more strongly on the local environment or growth–trait relationships may vary along environmental gradients.[br/][br/][b]3.[/b] We tested these alternative hypotheses using data on 27 352 juvenile trees, representing 278 species from 27 sites on all forested continents, and extensive functional trait data, 38% of which were obtained at the same sites at which growth was assessed. Data on potential evapotranspiration (PET), which summarizes the joint ecological effects of temperature and precipitation, were obtained from a global data base.[br/][br/][b]4.[/b] We estimated size-standardized relative height growth rates (SGR) for all species, then related them to functional traits and PET using mixed-effect models for the fastest growing species and for all species together.[br/][br/][b]5.[/b] Both the mean and 95th percentile SGR were more strongly associated with functional traits than with PET. PET was unrelated to SGR at the global scale. SGR increased with increasing SLA and decreased with increasing wood density and seed mass, but these traits explained only 3.1% of the variation in SGR. SGR–trait relationships were consistently weak across families and biogeographic zones, and over a range of tree statures. Thus, the most widely studied functional traits in plant ecology were poor predictors of tree growth over large scales.[br/][br/][b]6.[/b] Synthesis. We conclude that these functional traits alone may be unsuitable for predicting growth of trees over broad scales. Determining the functional traits that predict vital rates under specific environmental conditions may generate more insight than a monolithic global relationship can offer.
ISSN: 0022-0477

hal-01204226
https://hal.archives-ouvertes.fr/hal-01204226
DOI : 10.1111/1365-2745.12401
PRODINRA : 307144

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
ISSN: 0040-1951

hal-00843380
https://hal-mines-paristech.archives-ouvertes.fr/hal-00843380
DOI : 10.1016/j.tecto.2013.05.043

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
A NE-SW magnetotelluric 110 km-long profile including 18 sites was acquired across the western Rif Cordillera along the Eurasian-African plate boundary, allowing to constrain its poorly known deep structure. It extends from the Internal Zones, close to the Alboran coast, crossing the External Zones and up to the Gharb foreland basin. The periods recorded range from 0.001 s to 1000 s. The combination of magnetotelluric data with available geological data provides new insight regarding the relationship between deep and shallow crustal structures of the Rif Cordillera. Analyses of structural dimensionality suggest a preferential NW-SE direction, and a 2D joint inversion was performed. A 3D inversion extending the 2D model along the strike confirmed the reliability of this approach. The magnetotelluric model shows a heterogeneous upper crust in agreement with the geological structures observed at surface. The Internal Zones correspond to resistive (metamorphic rocks) and conductive (peridotites) bodies, while the External Zones and the foreland basin are characterized by large conductive bodies of variable thickness. A crustal detachment level separating shallow geological units from a probable variscan basement was inferred. At depth, the most relevant feature consists of large resistive bodies with a shallow irregular top, located below the frontal part of the Rif. The outcrops of exotic metapelitic, granitic and gneissic blocks in the frontal part of the Cordillera suggest that these large resistive bodies may correspond to a gneissic or granitic basement surrounded by metapelitic rocks. Late contractive thrust and diapiric processes were responsible for their uplift and shallow emplacement. The Rif constitutes an active southwestward vergent orogenic wedge, oblique to the present-day NW-SE convergent Eurasian-African plate boundary.
ISSN: 1525-2027

hal-00670999
https://hal.archives-ouvertes.fr/hal-00670999
DOI : 10.1029/2011GC003783

Éditeur(s) : HAL CCSD
2012 AGU Fall Meeting

hal-00771544
https://hal-mines-paristech.archives-ouvertes.fr/hal-00771544

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Atlas Mountains are characterized by high elevations and Quaternary volcanism. Long period magnetotelluric data acquired along a NNW-SSE transect reveal the presence of a conductive anomalous mantle below the High Atlas. Data dimensionality analyses show a preferent N80 degrees E strike of the deep resistivity structure in agreement with the induction vector alignment at long periods. Accordingly, a 2D inversion of the data set was carried out. Large resistive bodies at the crustal basement most likely correspond to batholiths emplaced in more conductive metapelites. They are covered by outcropping conductive sedimentary detritic and carbonate rocks. Lithospheric thinning producing anomalous mantle and basin development in the Atlas probably started during Triassic-Jurassic rifting. Inversion tectonics since the Oligocene produced low shortening on previous lithospheric weak zones, with thrusting of the Atlas above the stable African plate. Melting at the top of the anomalous mantle is connected with Quaternary basaltic volcanism in the Middle Atlas.
ISSN: 0278-7407

hal-00671017
https://hal.archives-ouvertes.fr/hal-00671017
DOI : 10.1029/2010TC002859