Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this paper, we describe an outcrop to characterize the effect of fracture spacing and type on larger scale effective elasticity, which is measured for the first time in-situ with a Schmidt hammer. The outcrop is dominated by lime mudstones and belongs to the deformation zone of the St Clement fault, in southern France. Our results suggest that small spacing of faults, open fractures and styolites leads to lesser effective Young's modulus, whereas small sealed fracture spacing leads to greater effective Young's modulus. These relationships are compatible with theoretical models of effective elasticity. Using Amadei and Savage (1993) approach, we define a non-linear model that relates Schmidt hammer rebound to spacing by fracture type. A hemisphere with a radius of 40 to similar to 200 cm is the rheological volume characterized by the Schmidt hammer. Results of model inversion demonstrate that variations of Schmidt hammer rebound over the outcrop can be used to estimate fracture type and stiffness. Stiffness of sealed fractures is 2-3 orders of magnitude greater than the stiffness of faults, stylolites and open fractures. This result is consistent with an increase of the rate of interseismic stress build-up of major faults with sealing of fractures in their damage zone.
ISSN: 0191-8141

hal-00669954
https://hal.archives-ouvertes.fr/hal-00669954
DOI : 10.1016/j.jsg.2011.09.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this paper we present a new local remeshing algorithm that is dedicated to the problem of erosion in finite element models whose grid follows the movement of the free surface. The method, which we name Surface Lagrangian Remeshing (SLR), is adapted to 2D Lagrangian models which couple surface erosion with deformation of Earth materials. The remeshing procedure preserves nodes defining the surface submitted to erosion and removes nodes belonging to surface elements whose internal angles or area is critically low. This algorithm is ideally suited to track long term surface evolution. To validate the method we perform a set of numerical tests, using triangular finite elements, which compare the results obtained with the SLR algorithm with global remeshing and with analytical results. The results show good agreements with analytical solutions. Interpolation errors associated with remeshing are generated locally and numerical diffusion is restricted to the remeshed domain itself. In addition this method is computationally costless compared to classical global remeshing algorithm. We propose to couple the SLR method with the Dynamical Lagrangian Remeshing (DLR) algorithm to enable local remeshing only of Lagrangian models coupling large deformation of Earth materials with large erosion.
ISSN: 0098-3004

hal-00639472
https://hal.archives-ouvertes.fr/hal-00639472
DOI : 10.1016/j.cageo.2010.05.023

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We explore the use of seismic noise produced by rivers to monitor the bed load transport in the case of a low-discharge braided river in the French Alps: the "torrent de St Pierre". For this purpose, we deployed two dedicated seismic networks during summers 2007 and 2008, for which the characteristics of the recorded continuous signal are similar despite changes in the sensor locations. For dry weather conditions, only melting of nearby glaciers controls the supply of water to the stream. In these conditions, the river hydrology and the seismic energy in the 2-80 Hz frequency band both follow a diurnal fluctuation similar to the thermal amplitude. In contrast during rainfall episodes, the temperature variation fails to explain the hydrodynamic changes. Dense cloud covers reduce glacier melting and the recorded seismic energy denotes bursts of high-frequency seismic noise well correlated with water level data. Comparisons between the recorded seismic signals and the collected hydrological and sediment load data indicate that a frequency band of 3-9 Hz best explains the water level changes and thus the seismic waves coming from the flow turbulence. These analyses also reveal the presence of a seismic noise threshold that might be linked to the water shear stress exerted by the flowing water. Using the seismic energy in this frequency band as a proxy of the fluvial shear stress, the seismic-hydrologic relationship may be sensitive to variations in bed load transport. The spectral content of the seismic energy shows patterns consistent with the mobilization of sediment particles. From the interpretations of the seismic wave attenuation of river sources, we finally propose that stations at a distance from the stream less than 50 m are able to record most sediment particles. Farther stations are still useful during extreme events when largest grain sizes are mobilized. More generally this study demonstrates the feasibility of using the river seismic signal to survey bed load transport in various river types from small braided mountain rivers like the "torrent de St Pierre" to the large entrenched Himalayan rivers.
ISSN: 0022-1694

hal-00644789
https://hal.archives-ouvertes.fr/hal-00644789
DOI : 10.1016/j.jhydrol.2011.07.014

Éditeur(s) : HAL CCSD
Résumé : International audience
AGU Fall Meeting 2014
San Francisco, United States

insu-01119759
https://hal-insu.archives-ouvertes.fr/insu-01119759

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Assessing seismic hazards remains one of the most challenging scientific issues in Earthsciences. Deep tectonic processes are classically considered as the only persistentmechanism driving the stress loading of active faults over a seismic cycle. Here we show via amechanical model that erosion also significantly influences the stress loading of thrust faultsat the timescale of a seismic cycle. Indeed, erosion rates of about B0.1–20mmyr1, asdocumented in Taiwan and in other active compressional orogens, can raise the Coulombstress by B0.1–10 bar on the nearby thrust faults over the inter-seismic phase. Masstransfers induced by surface processes in general, during continuous or short-lived andintense events, represent a prominent mechanism for inter-seismic stress loading offaults near the surface. Such stresses are probably sufficient to trigger shallow seismicity orpromote the rupture of deep continental earthquakes up to the surface.
ISSN: 2041-1723

insu-01087103
https://hal-insu.archives-ouvertes.fr/insu-01087103
https://hal-insu.archives-ouvertes.fr/insu-01087103/document
https://hal-insu.archives-ouvertes.fr/insu-01087103/file/Steer2014_NatureComm_accepted.pdf
DOI : 10.1038/ncomms6564

Éditeur(s) : HAL CCSD Bureau de recherches géologiques et minières
Résumé : National audience
Les tremblements de Terre sont sans doute l’un des phénomènes les plus catastrophiques associés à la dynamique de notre planète. Leur occurrence peut être associée d’une part au chargement lent et progressif des failles dû au mouvement des plaques tectoniques, mais également à la proximité d’autres séismes qui peuvent localement provoquer une déstabilisation du milieu. Les séismes sont classiquement interprétés dans le cadre de la théorie du cycle sismique (Fig. 1). La période asismique, correspondant au chargement séculaire des contraintes sur le plan des failles, est appelée période inter-sismique. Sa durée, entre 50 et 1000 ans, dépend du contexte géodynamique et notamment de la vitesse de chargement. La phase co-sismique correspond au séisme, i.e. à la phase de nucléation et de propagation de la rupture sismique. La période de temps associée est extrêmement courte et varie suivant les séismes entre quelques secondes à plusieurs minutes pour les méga-tremblements de terre comme celui de Sumatra en 2004 ou plus récemment celui du Japon en 2011. Enfin, suite à la rupture sismique, on considère une phase post-sismique qui correspond à un réajustement mécanique rapide du milieu qui peut s’effectuer sur plusieurs semaines, mois ou même années. La courte échelle de temps des observations sismologiques ou géodésiques (<100 ans) par rapport à la durée d’un cycle sismique (plusieurs centaines d’années) est un facteur limitant. Ainsi, aucun cycle sismique complet n’a pour l’instant pu être documenté.
ISSN: 0292-8477

insu-00913121
https://hal-insu.archives-ouvertes.fr/insu-00913121
https://hal-insu.archives-ouvertes.fr/insu-00913121/document
https://hal-insu.archives-ouvertes.fr/insu-00913121/file/geochronique_cattinetal.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
Geodynamics and Environment in East Asia Symposium (GEEA Meeting)
Hualien, Taiwan

insu-01119753
https://hal-insu.archives-ouvertes.fr/insu-01119753

Éditeur(s) : HAL CCSD
Résumé : International audience
Geodynamics and Environment in East Asia Symposium (GEEA Meeting)
Hualien, Taiwan

insu-01119754
https://hal-insu.archives-ouvertes.fr/insu-01119754

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Mechanisms that control seismic activity in low strain rate areas such as western Europe remain poorly understood. For example, in spite of low shortening rates of <0.5 mm/ yr, the Western Alps and the Pyrenees are underlain by moderate but frequent seismicity detectable by instruments. Beneath the elevated part of these mountain ranges, analysis of earthquake focal mechanisms indicates extension, which is commonly interpreted as the result of gravitational collapse. Here we show that erosional processes are the predominant control on present-day deformation and seismicity. We demonstrate, using fi nite element modeling, that erosion induces extension and rock uplift of the elevated region of mountain ranges accommodating relatively low overall convergence. Our results suggest that an erosion rate of ~1 mm/yr can lead to extension in mountain ranges accommodating signifi cant shortening of <3 mm/yr. Based on this study, the seismotectonic framework and seismic hazard assessment for low strain rate areas need to be revisited, because erosion-related earthquakes could increase seismic hazard.
ISSN: 0091-7613

insu-00817341
https://hal-insu.archives-ouvertes.fr/insu-00817341
DOI : 10.1130/G33942.1

Éditeur(s) : HAL CCSD
Résumé : International audience
After the 2009 Morakot typhoon, which triggered numerous large landslides in Taiwan, Mouyen et al. (2013)showed for the first time the potential of time-lapse gravity survey to infer the mass of sediments transferringby landsliding or through rivers. By providing an integrated measurement of masses, gravimetry might thus becomplementary to common methods used to assess the sediments discharge of rivers. But the masses of rocksdisplaced by Morakot were exceptionally large as a result of the record-breaking rainfalls brought by this typhoonand one might wonder to what extent time-lapse gravimetry could record such sediment transfers. In order tobetter assess the capabilities of this method, we set a time-lapse gravity network dedicated to the monitoring ofsuch sediments transfers in Paolai village (south-central Taiwan). Paolai is located near the large Laonong riverwhere temporary alluvial deposits of sediments exist and face steep mountain slopes likely to experience landslides.Both features are considered as potential source of mass transfers, and in turn of temporal gravity changes. Thefirst base gravity measurements were done in November 2015, using absolute and relative gravimeters, and will berepeated every year, before and after the typhoon season. In the same time, we also use a terrestrial lidar to scan thegeometry of both the river and the mountain slopes, hence providing a detailed topographical survey of the studiedarea. Adding Lidar measurements is an efficient strategy to solve for the non-uniqueness of gravity solutions.Meanwhile, we use the Eros morphodynamic model, that combine landsliding and flooding models, to investigatevarious scenarios of landsliding and subsequent sediment transport and compute the gravity changes on a virtualnetwork of gravimeters. This gives us insights on the expected order of magnitudes for these surface sedimenttransfers, which are useful to unravel the induced gravity signal from others sources such as local hydrology orvertical ground displacements. The modeling results also enable us to set network location that are best defined todetect mass changes associated with sediment transfer. The main objective of this study is to test whether timelapsegravity brings a new and reliable information compared to present methods monitoring sediments transfersand landscape evolution.
European Geosciences Union General Assembly 2016
Vienne, Austria

insu-01308554
https://hal-insu.archives-ouvertes.fr/insu-01308554

Éditeur(s) : HAL CCSD
Résumé : Among erosion processes, river incision is classicaly described as a key process controlling erosion of landscapes. Incision efficiency is mainly influenced by climate and erodibility. This latter is not only dependent on the nature of the bedrock, but also on its past deformation, which affects its rheological effective properties, such as fracture density. The main objectives of this thesis are: (1) to better constrain the relationship between effective properties and erodibility, and (2) to quantify the influence of erodibility and erosion on both the temporal and spatial building or decay of the topography. Several numerical tools are developed. A 1D formalism of landscape evolution is introduced, including river incision with stochastic distribution of water discharge and hillslope landsliding. A new remeshing algorithm called Surface Lagrangian Remeshing (SLR) is developed as a complement to remeshing algorithms dealing with internal elements. It allows one to take into account long-term erosion into 2D Lagrangian numerical codes based on triangular finite elements. Then the potentiality of measuring erodibility in-situ using a Schmidt hammer (R) is assessed for the active orogen of Taiwan, the diagenetic Annot sandstones and St Clement fault zone. Results suggest a strong control of R by effective properties. A linear model based on effective medium theory is applied to a fault zone with an unmacthed resolution (750 measures, 25 measures per square meter). The model successfully correlates R to fracture density. These results demonstrate that effective elasticity as well as erodibility are sensitive to the density and type of fractures. Finally I focus on the erosional and rheological conditions that allows reproducing post-orogenic evolution of mountain belts. A model coupling surface erosion and regional isostatic uplift is consistent with observations. The topographic decay and decrease of the ratio of surface elevation over crustal root thickness is at first order controlled by the initial geometry of the mountain belt and erosion efficiency. This new model highlights the control ofclimate and erodibility on the topographic decay and of lithospheric rheology on the perseverance of crustal roots.
Parmi les processus d'érosion, l'incision des rivières est classiquement décrit comme un processus clé contrôlant l'érosion des paysages. L'efficacité de l'incision est principalement influencée par le climat et par l'érodabilité. Ce dernier paramètre ne dépend pas seulement de la nature du substratum rocheux, mais aussi de sa déformation passée qui affecte ses propriétés rhéologiques équivalentes. Les principaux objectifs de cette thèse sont: (1) de mieux contraindre les relations entre propriétés équivalentes et érodabilité, et (2) de quantifier l'influence de l'érosion et de l'érodabilité sur la formation ou la décadence, spatiale et temporelle, de la topographie. Plusieurs outils numériques sont développés. Un formalisme 1D d'évolution des paysages est proposé, prenant en compte simultanément l'incision des rivières avec une distribution stochastique des débits en eau et l'érosion des versants par glissements de terrain. Un nouvel algorithme de remaillage appelé Surface Lagrangian Remeshing (SLR) est développé. Il permet de prendre en compte l'érosion à long terme dans les codes numériques 2D Lagrangiens basés sur des éléments finis triangulaires. Ensuite, la possibilité de mesurer in-situ l'érodabilité avec un marteau de Schmidt (R) est évaluée pour: l'orogène actif de Taiwan, les grès diagénétiques d'Annot et la zone de faille de St Clément. Les résultats suggèrent un fort contrôle de R par les propriétés équivalentes des roches testées. Un modèle linéaire, basé sur la théorie des milieux équivalents, est appliqué à une zone de faille avec une résolution inégalée (750 mesures, 25 mesures par mètre carré). Le modèle permet de corréler avec succès la densité de fracture et R. Ces résultats démontrent empiriquement que l'élasticité équivalente ainsi que l'érodabilité sont sensibles à la densité et à la nature des fractures. Enfin j'étudie les conditions d'érosion et de rhéologie qui permettent de reproduire l'évolution des chaînes de montagnes post-orogéniques. Un modèle couplant érosion en surface et soulèvement isostatique régional est compatible avec les observations. Les taux de décroissance topographique et de diminution du rapport de l'élévation de surface sur l'épaisseur de racine crustale sont contrôlés au premier ordre par la géométrie initiale de la chaîne de montagne et par l'efficacité de l'érosion. Ce nouveau modèle met en évidence le contrôle du climat et de l'érodabilité sur la décroissance topographique et de la rhéologie lithosphérique sur la persévérance des racines crustales.
https://tel.archives-ouvertes.fr/tel-00602341

tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341/document
https://tel.archives-ouvertes.fr/tel-00602341/file/thesephilippesteer.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
Extreme rainfall events can trigger numerous landslides in mountainous areas and a prolonged increase of river sediment load. The resulting mass transfer at the Earth surface in turn induces stress changes at depth, which could be sufficient to trigger shallow earthquakes. The 2009 Morakot typhoon represents a good case study as it delivered 3 m of precipitation in 3 days and caused some of the most intense erosion ever recorded. Analysis of seismicity time-series before and after the Morakot typhoon reveals a systematic increase of shallow (i.e. 0-15 km of depth) earthquake frequency in the vicinity of the areas displaying a high spatial density of landslides. This step-like increase in frequency lasts for at least 2-3 years and does not follow an Omori-type aftershock sequence. Rather, it is associated to a step change of the Gutenberg-Richter b-value of the earthquake catalog. Both changes occurred in mountainous areas of southwest Taiwan, where typhoon Morakot caused extensive landsliding. These spatial and temporal correlations strongly suggest a causal relationship between the Morakot-triggered landslides and the increase of earthquake frequency and their associated b-value. We propose that the progressive removal of landslide materials from the steep mountain landscape by river sediment transport acts as an approximately constant increase of the stress rate with respect to pre-typhoon conditions, and that this in turn causes a step-wise increase in earthquake frequency. To test this hypothesis, we investigate the response of a rate-and-state fault to stress changes using a 2-D continuum elasto-dynamic model. Consistent with the results of Ader et al. (2013), our preliminary results show a step-like increase of earthquake frequency in response to a step-like decrease of the fault normal stress. We also investigate the sensitivity of the amplitude and time-scale of the earthquake frequency increase to the amplitude of the normal stress change and to rheological parameters. Our study offers new insights on the potential influence of extreme erosional events on the short-time scale dynamics of faults and earthquakes.
American Geophysical Union Fall Meeting 2016
San Francisco, United States

insu-01416987
https://hal-insu.archives-ouvertes.fr/insu-01416987