Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this paper we present a new local remeshing algorithm that is dedicated to the problem of erosion in finite element models whose grid follows the movement of the free surface. The method, which we name Surface Lagrangian Remeshing (SLR), is adapted to 2D Lagrangian models which couple surface erosion with deformation of Earth materials. The remeshing procedure preserves nodes defining the surface submitted to erosion and removes nodes belonging to surface elements whose internal angles or area is critically low. This algorithm is ideally suited to track long term surface evolution. To validate the method we perform a set of numerical tests, using triangular finite elements, which compare the results obtained with the SLR algorithm with global remeshing and with analytical results. The results show good agreements with analytical solutions. Interpolation errors associated with remeshing are generated locally and numerical diffusion is restricted to the remeshed domain itself. In addition this method is computationally costless compared to classical global remeshing algorithm. We propose to couple the SLR method with the Dynamical Lagrangian Remeshing (DLR) algorithm to enable local remeshing only of Lagrangian models coupling large deformation of Earth materials with large erosion.
ISSN: 0098-3004

hal-00639472
https://hal.archives-ouvertes.fr/hal-00639472
DOI : 10.1016/j.cageo.2010.05.023

Éditeur(s) : Wiley-blackwell
Résumé : A new benthic dinoflagellate species, Prorocentrum bimaculatum sp. nov., is studied from Kuwaits marine sediments, based on detailed morphological and molecular data. Cells are large, oblong oval in shape. They are 49.955.3 mu m long and 38.443.2 mu m wide. The ornamentation of this new species is peculiar, and characterized by smooth valves with large pores (0.320.50 mu m) scattered on their surface, except in two circular patches of similar to 15 mu m in diameter, devoid of ornamentation and located on both sides of the valve centers. The periflagellar area is widely triangular, located in a moderate excavation of the right valve, and comprises nine platelets. The intercalary band of P. bimaculatum is smooth. The molecular phylogenetic position of this new taxon was inferred from SSU and LSU rDNA genes. In both phylogenetic analyses, P. bimaculatum branched with high support with Prorocentrum consutum and formed a clade sister to the one including P. lima and related species such as P. arenarium, P. belizeanum, P. hoffmannianum, and P. maculosum. From the phylogenetic study, since most species related to P. bimaculatum are known for their toxic effects and production of okadaic acid, this new species can be considered as a potential toxin producer, but this has to be analyzed.
Journal Of Phycology (0022-3646) (Wiley-blackwell), 2012-02 , Vol. 48 , N. 1 , P. 211-221

Droits : 2012 Phycological Society of America
http://archimer.ifremer.fr/doc/00066/17756/15698.pdf
DOI:10.1111/j.1529-8817.2011.01102.x
http://archimer.ifremer.fr/doc/00066/17756/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The growth of relief in active tectonic areas is mainly controlled by the interactions between tectonics and surface processes (erosion and sedimentation). The study of long-lived morphologic markers formed by these interactions can help in quantifying the competing effects of tectonics, erosion and sedimentation. In regions experiencing active extension, river-long profiles and faceted spurs (triangular facets) can help in un- derstanding the development of mountainous topography along normal fault scarps. In this study, we devel- oped analogue experiments that simulate the morphologic evolution of a mountain range bounded by a normal fault. This paper focuses on the effect of the fault slip rate on the morphologic evolution of the foot- wall by performing three analogue experiments with different fault slip rates under a constant rainfall rate. A morphometric analysis of the modelled catchments allows comparing with a natural case (Tunka half- graben, Siberia). After a certain amount of fault slip, the modelled footwall topographies of our models reaches a dynamic equilibrium (i.e., erosion balances tectonic uplift relative to the base level) close to the fault, whereas the topography farther from the fault is still being dissected due to regressive erosion. We show that the rates of vertical erosion in the area where dynamic equilibrium is reached and the rate of re- gressive erosion are linearly correlated with the fault throw rate. Facet morphology seems to depend on the fault slip rate except for the fastest experiment where faceted spurs are degraded due to mass wasting. A stream-power law is computed for the area wherein rivers reach a topographic equilibrium. We show that the erosional capacity of the system depends on the fault slip rate. Finally, our results demonstrate the pos- sibility of preserving convex river-long profiles on the long-term under steady external (tectonic uplift and rainfall) conditions.
ISSN: 0040-1951

hal-00646966
https://hal.archives-ouvertes.fr/hal-00646966
https://hal.archives-ouvertes.fr/hal-00646966/document
https://hal.archives-ouvertes.fr/hal-00646966/file/preprint_Strak_2011.pdf
DOI : 10.1016/j.tecto.2011.10.005

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : 44 pages, 14 figures
International audience
With any non necessarily orientable unpunctured marked surface (S,M) we associate a commutative algebra, called quasi-cluster algebra, equipped with a distinguished set of generators, called quasi-cluster variables, in bijection with the set of arcs and one-sided simple closed curves in (S,M). Quasi-cluster variables are naturally gathered into possibly overlapping sets of fixed cardinality, called quasi-clusters, corresponding to maximal non-intersecting families of arcs and one-sided simple closed curves in (S,M). If the surface S is orientable, then the quasi-cluster algebra is the cluster algebra associated with the marked surface (S,M) in the sense of Fomin, Shapiro and Thurston. We classify quasi-cluster algebras with finitely many quasi-cluster variables and prove that for these quasi-cluster algebras, quasi-cluster monomials form a linear basis. Finally, we attach to (S,M) a family of discrete integrable systems satisfied by quasi-cluster variables associated to arcs in the quasi-cluster algebra and we prove that solutions of these systems can be expressed in terms of cluster variables of type A.
ISSN: 0925-9899

hal-00821878
https://hal.archives-ouvertes.fr/hal-00821878
ARXIV : 1105.1560
DOI : 10.1007/s10801-015-0586-1

Éditeur(s) : HAL CCSD
Résumé : Among erosion processes, river incision is classicaly described as a key process controlling erosion of landscapes. Incision efficiency is mainly influenced by climate and erodibility. This latter is not only dependent on the nature of the bedrock, but also on its past deformation, which affects its rheological effective properties, such as fracture density. The main objectives of this thesis are: (1) to better constrain the relationship between effective properties and erodibility, and (2) to quantify the influence of erodibility and erosion on both the temporal and spatial building or decay of the topography. Several numerical tools are developed. A 1D formalism of landscape evolution is introduced, including river incision with stochastic distribution of water discharge and hillslope landsliding. A new remeshing algorithm called Surface Lagrangian Remeshing (SLR) is developed as a complement to remeshing algorithms dealing with internal elements. It allows one to take into account long-term erosion into 2D Lagrangian numerical codes based on triangular finite elements. Then the potentiality of measuring erodibility in-situ using a Schmidt hammer (R) is assessed for the active orogen of Taiwan, the diagenetic Annot sandstones and St Clement fault zone. Results suggest a strong control of R by effective properties. A linear model based on effective medium theory is applied to a fault zone with an unmacthed resolution (750 measures, 25 measures per square meter). The model successfully correlates R to fracture density. These results demonstrate that effective elasticity as well as erodibility are sensitive to the density and type of fractures. Finally I focus on the erosional and rheological conditions that allows reproducing post-orogenic evolution of mountain belts. A model coupling surface erosion and regional isostatic uplift is consistent with observations. The topographic decay and decrease of the ratio of surface elevation over crustal root thickness is at first order controlled by the initial geometry of the mountain belt and erosion efficiency. This new model highlights the control ofclimate and erodibility on the topographic decay and of lithospheric rheology on the perseverance of crustal roots.
Parmi les processus d'érosion, l'incision des rivières est classiquement décrit comme un processus clé contrôlant l'érosion des paysages. L'efficacité de l'incision est principalement influencée par le climat et par l'érodabilité. Ce dernier paramètre ne dépend pas seulement de la nature du substratum rocheux, mais aussi de sa déformation passée qui affecte ses propriétés rhéologiques équivalentes. Les principaux objectifs de cette thèse sont: (1) de mieux contraindre les relations entre propriétés équivalentes et érodabilité, et (2) de quantifier l'influence de l'érosion et de l'érodabilité sur la formation ou la décadence, spatiale et temporelle, de la topographie. Plusieurs outils numériques sont développés. Un formalisme 1D d'évolution des paysages est proposé, prenant en compte simultanément l'incision des rivières avec une distribution stochastique des débits en eau et l'érosion des versants par glissements de terrain. Un nouvel algorithme de remaillage appelé Surface Lagrangian Remeshing (SLR) est développé. Il permet de prendre en compte l'érosion à long terme dans les codes numériques 2D Lagrangiens basés sur des éléments finis triangulaires. Ensuite, la possibilité de mesurer in-situ l'érodabilité avec un marteau de Schmidt (R) est évaluée pour: l'orogène actif de Taiwan, les grès diagénétiques d'Annot et la zone de faille de St Clément. Les résultats suggèrent un fort contrôle de R par les propriétés équivalentes des roches testées. Un modèle linéaire, basé sur la théorie des milieux équivalents, est appliqué à une zone de faille avec une résolution inégalée (750 mesures, 25 mesures par mètre carré). Le modèle permet de corréler avec succès la densité de fracture et R. Ces résultats démontrent empiriquement que l'élasticité équivalente ainsi que l'érodabilité sont sensibles à la densité et à la nature des fractures. Enfin j'étudie les conditions d'érosion et de rhéologie qui permettent de reproduire l'évolution des chaînes de montagnes post-orogéniques. Un modèle couplant érosion en surface et soulèvement isostatique régional est compatible avec les observations. Les taux de décroissance topographique et de diminution du rapport de l'élévation de surface sur l'épaisseur de racine crustale sont contrôlés au premier ordre par la géométrie initiale de la chaîne de montagne et par l'efficacité de l'érosion. Ce nouveau modèle met en évidence le contrôle du climat et de l'érodabilité sur la décroissance topographique et de la rhéologie lithosphérique sur la persévérance des racines crustales.
https://tel.archives-ouvertes.fr/tel-00602341

tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341/document
https://tel.archives-ouvertes.fr/tel-00602341/file/thesephilippesteer.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011