Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
We report here U-series and trace element data for an olivine-melilitite lava flow, erupted in 1957 in the Virunga volcanic field and known as the Mugogo eruption. Petrological and geochemical data show that the Mugogo magma represents a primary mantle melt, derived from a low degree of melting of a metasomatised mantle source. It is highly enriched in very incompatible trace elements (e.g. more than 300-fold compared to primitive mantle for Th), with a distinctly lower enrichment in Rb, Ba and Sr. The high Th/U and low (230Th/232Th) ratios (4.4 and 0.750, respectively, with a (230Th/238U) ratio of 1.09) are close to the values found for the Nyamuragira basanites. But the most striking feature is the very low (226Ra/230Th) ratio of 0.48, the lowest ever measured in a mafic volcanic rock. The most probable origin of this Ra deficit is the presence of phlogopite (having a high Ra partition coefficient) in the lithospheric mantle, either as a residual phase during low-degree isobaric melting (in batch-melting or a diffusion-controlled melting models), or in a phlogopite-bearing upper mantle through which the melt migrates and equilibrates (in an equilibrium porous flow model commonly used to describe adiabatic melting). The disequilibrium pattern (230Th) > (238U) > (210Pb) ≫ (226Ra), reversed compared to the pattern observed in the Oldoinyo Lengai natrocarbonatite, suggests that a carbonatite melt might have been involved to explain the Ra deficit. We thus discuss the possibility of an early separation of a Ra-enriched carbonate melt either from the olivine-melilitite melt or from a carbonated mantle source, followed by the production of a low-degree melt of olivine-melilitite composition, but the lack of available experimental, petrological and geochemical evidences makes this process somewhat speculative at present. Further studies of recent (<5 ky) olivine-melilitites are needed to check whether the large Ra deficit is a general characteristic of this type of magma that can be used to constrain models of its formation.
ISSN: 0010-7999

hal-01174173
https://hal.archives-ouvertes.fr/hal-01174173
DOI : 10.1007/s00410-015-1124-9

Éditeur(s) : HAL CCSD Elsevier
Résumé : This paper analyzes the effects of pollution permit markets on equilibrium employment in a wage-setting/ price-setting (WS-PS) model. The employment level is determined according to different methods of financing unemployment benefits: a wage tax or the revenue from a pollution permit auction. We show that a permit market weakens the trade unions' market power. Furthermore, whatever the method of financing unemployment benefits, the choice of the pollution cap is always neutral for employment, and the level of employment always increases as the pollution abatement technology becomes more efficient. Depending on the value of the wage tax, the employment level can be higher or lower when unemployment benefits are financed by pollution permits rather than wage tax.
ISSN: 0264-9993

halshs-00866721
https://halshs.archives-ouvertes.fr/halshs-00866721

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Serpentinites are one of the major components of the oceanic lithosphere and are stable in the slab and the mantle wedge up to 100-150 km depth in subduction zones. During oceanic mantle hydration and alteration, they trap trace and fluid mobile (FME: B, Li, As, Sb, Rb, Ba, Cs, Sr, U and Pb) elements that participate to elemental transfer occurring between the dehydrating slab and the mantle wedge in subduction context. The Lanzo massif is an eclogitized oceanic lithosphere that preserved its oceanic structure and recorded different steps of serpentinization/de-serpentinization from oceanic lizardite to prograde antigorite in subduction context, up to its dehydration and secondary olivine crystallization, and finally retrograde antigorite during massif exhumation. It constitutes a suitable place to study trace element behavior during serpentinization/de-serpentinization processes and associated chemical transfers between the different envelopes of the oceanic lithosphere and the mantle wedge. Geochemical analyses of serpentine and associated minerals show that the serpentinization/de-serpentinization of the Lanzo massif took place in a relatively closed system without significant trace element transfer between the different parts of the oceanic lithosphere. In the deeper part of the lithosphere, from the slightly serpentinized mantle peridotites (SSP, < 20% serpentinization) to the paleo-Moho, composed of massive serpentinites (MS, 80% serpentinization), the trace elements mobility is reduced. The chemical composition of lizardite and antigorite is homogenized with the local degree of serpentinization: in SSP, serpentine veins composition is inherited from the host mineral while, in MS, their composition is homogenous between destabilized phases at the scale of the outcrop (~ 5 m). In the shallowest part of the oceanic lithosphere, from the paleo-Moho to the oceanic paleo-seafloor, the serpentinites are foliated (FS, > 90% serpentinization). In that zone, the alpine deformation enhances the mobility of trace elements and permits their redistribution and the homogenization of antigorite composition at massif scale. Locally, in the SSP and MS, the crystallization of metamorphic veins of ~ 1-2 m corresponds to channelized fluid flows that allowed fluid transfers - and thereby trace elements - to longer distance. The successive crystallizations of antigorite and then olivine are accompanied by a diminution of some FME (B, Li, As, Sb, Ba, Rb) and Eu contents attesting that these elements are removed from slab to mantle wedge during subduction.
ISSN: 0009-2541

hal-00937661
https://hal.archives-ouvertes.fr/hal-00937661
DOI : 10.1016/j.chemgeo.2013.08.025

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The formation age of the Siberian cratonic mantle is not well established as yet. Re–Os data on various mantle-derived materials have shown that it contains Archaean components, but the reported Re-depletion ages show a broad variation range (3.4 to 1 Ga) and are commonly ≤ 2 Ga for peridotite xenoliths. We report Hf and Nd isotope data for cpx and garnet separated from nine refractory spinel and garnet peridotite xenoliths from the Udachnaya kimberlite. The cpx from low-opx spinel harzburgites show extremely high εHf values, from + 607 to + 2084, which testify to long-term evolution of these rocks with high Lu/Hf ratios, consistent with their residual origin and near absence of post-melting enrichments in the Lu–Hf system. Such high εHf values are unusual for cpx from other cratonic peridotites and are higher than those reported for depleted cpx in off-cratonic peridotites. The clinopyroxenes from low-opx spinel harzburgites yield Hf model ages from 1.9 to 1.7 Ga while the cpx from high-opx spinel harzburgites yield Hf model ages from 3.0 to 1.9 Ga. When plotted together, they define a Lu/Hf isochron with an age of 1.80 Ga, which we consider as a robust estimate of the formation age (melt extraction event) because it is obtained on residual rocks that show no evidence for HREE and Hf enrichments and because the model ages for three out of four individual samples are similar to each other. The cpx have high εNd of + 94 to + 123, which are inconsistent with their low Sm/NdPM of < 1 and yield no meaningful age estimates. The consistently high, positive εNd in these cpxs can be interpreted in terms of long-term evolution of refractory peridotites with high Sm/Nd, followed by relatively recent LREE enrichments.We infer that a significant part of the lithospheric mantle in the central Siberian craton may have been formed during a major event (or a series of events) at around 1.8 Ga. Older ages reported for the central Siberian craton may refer to less common materials from cratonic or other domains formed in the Archaean that were later incorporated into the cratonic roots. The transition from the “Archaean” to “modern” tectonic regimes in Siberia and possibly elsewhere may have taken place at 1.8–1.9 Ga rather than at ~ 2.5 Ga, i.e. in the second half of the Paleoproterozoic rather than at the Archaean–Proterozoic boundary, at which time the asthenospheric mantle became generally too cold to experience high-degree melting on a large scale. The ~ 1.8 Ga formation age of the Siberian cratonic mantle is coeval with that for a major part of the ancient continental crust in the central Siberian craton. The temporal crust–mantle links may be explained either by the generation of the initial source materials for continental crust in the same melting event that formed the residual peridotites or, alternatively, by subduction and melting of pre-existing proto-lithosphere destabilized by a major mantle upwelling that formed the residual mantle.
ISSN: 0009-2541

hal-01115519
https://hal.archives-ouvertes.fr/hal-01115519
DOI : 10.1016/j.chemgeo.2014.10.018

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
We report new textural and chemical data for 10 garnet peridotite xenoliths from the Udachnaya kimberlite and examine them together with recent data on another 21 xenoliths from the 80-220 km depth range. The samples are very fresh (LOI near zero), modally homogeneous and large (>100 g). Some coarse-grained peridotites show incipient stages of deformation with <10 % neoblasts at grain boundaries of coarse olivine. Such microstructures can only be recognized in very fresh rocks, because fine-grained interstitial olivine is strongly affected by alteration, and may have been overlooked in previous studies of altered peridotite xenoliths in the Siberian and other cratons. Some of the garnet peridotites are similar in composition to low-opx Udachnaya spinel harzburgites (previously interpreted as pristine melt extraction residues), but the majority show post-melting enrichments in Fe and Ti. The least metasomatized coarse peridotites were formed by 30-38 % of polybaric fractional melting between 7 and 4 GPa and ≤1-3 GPa. Our data together with experimental results suggest that garnet in these rocks, as well as in some other cratonic peridotites elsewhere, may be a residual mineral, which has survived partial melting together with olivine and opx. Many coarse and all deformed garnet peridotites from Udachnaya underwent modal metasomatism through interaction of the melting residues with Fe-, Al-, Si-, Ti-, REE-rich melts, which precipitated cpx, less commonly additional garnet. The xenoliths define a complex geotherm probably affected by thermal perturbations shortly before the intrusion of the host kimberlite magmas. The deformation in the lower lithosphere may be linked to metasomatism.
ISSN: 0010-7999

hal-00941252
https://hal.archives-ouvertes.fr/hal-00941252
DOI : 10.1007/s00410-013-0855-8

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We present a new interpretation of anisotropy of magnetic susceptibility (AMS) fabrics in basaltic lava flows based on the detailed study of magnetic mineralogy and silicate crystallographic fabric of a Quaternary lava flow from the French Massif Central (La Palisse). We consider the model of AMS fabric imbrication between magnetic foliation and flow surface, as initially proposed for dykes. At the two sampling sites, the concordance between the flow direction deduced from the AMS foliation and that deduced from field observations indicates that the imbrication model could apply to the lava flows. However, the flow senses inferred fromAMSare systematically opposed between the two sampling sites suggesting permutations between K1 and K3 AMS axes, a configuration referred to as inverse fabric. Electron backscatter diffraction (EBSD) measurements show strong lattice-preferred orientations (LPO) for plagioclase, especially the (010) plagioclase plane, which tends to be parallel to the flow. Clinopyroxene LPO remains less marked than plagioclase LPO, whereas titanomagnetite does not display a significant LPO. Comparison between magnetic and crystallographic fabrics suggests that the AMS fabric of the lava flow results from the distribution of titanomagnetite grains, which is in turn controlled by the fabric of the silicate framework. Magnetic hysteresis parameters and anisotropy of remanent magnetization (ARM) measurements exclude a significant contribution from single-domain grains, often called upon to explain inverse magnetic fabrics. The origin of the observed inverse magnetic fabric may relate to the dip of the palaeosurface, which is the only remarkable difference between the two sampling sites. AMS appears as a good tool to determine the direction of basaltic lava flows and coupling with local crystallographic fabric data provides a valuable control of relationships between magnetic fabrics and flow and thus contributes to better constrain the AMS signature of lava flows.
ISSN: 0956-540X

hal-00903561
https://hal.archives-ouvertes.fr/hal-00903561
https://hal.archives-ouvertes.fr/hal-00903561/document
https://hal.archives-ouvertes.fr/hal-00903561/file/TB-GJI-193-2-Orig.pdf
DOI : 10.1093/gji/ggs115

Éditeur(s) : HAL CCSD
Résumé : International audience
Debris avalanches derived from the flanks of volcanic islands are among the largest on Earth. Debris avalanches are rare, catastrophic destabilizations that still keep geologists debating about the mechanisms that initiate them and make them travel huge runout distances. To shed light on the trigger of such destabilizations, we studied the inland scar of a debris avalanche deposit cropping out at Piton des Neiges, a dormant and eroded basaltic volcano of La Réunion Island. The avalanche deposit rests on a pile of 50-70 sill intrusions with a shallow northward dip, i.e. toward the sea. We measured the anisotropy of magnetic susceptibility in a transect across the uppermost sill of the pile in contact with the avalanche deposit. This transect reveals a strongly asymmetric magnetic fabric, consistent with a north-directed shear movement of the upper intrusion wall. This suggests that the upper sill induced a co-intrusive shear displacement of the volcano flank toward the sea. The upper sill margin in contact with the avalanche is striated, showing that this intrusion is older than the avalanche. Striae indicate a northward direction of avalanche runout. The upper sill margin also displays a magmatic lineation consistent with a magma flow in the intrusion toward the north. There is thus a striking kinematic consistency between the directions of intrusion propagation and avalanche runout, both oriented toward the sea. From the above results, we propose that repeated sill intrusions, such as observed on Piton des Neiges, increase the instability of a volcanic edifice. Each injection induces an incremental slip of the overlying rock mass, which may eventually end up into a landslide. Sill intrusions associated with seaward displacements of volcano flank, such as inferred for the April 2007 eruption of Piton de la Fournaise (also in La Réunion), should therefore be considered as a potential trigger of debris avalanches.
Fall meeting
San Francisco, United States

hal-01387002
http://hal.univ-reunion.fr/hal-01387002

Éditeur(s) : HAL CCSD Elsevier
Résumé : While most rocks from active volcanoes display ((210)pb/Ra-226) activity ratios lower than or close to the equilibrium value of 1, several other have ratios much higher than 1. Transfer of Rn-222 by magmatic volatiles has often been advocated to explain both Pb-210 deficits and excesses. We develop here a model to account for Pb-210 excesses through Rn-222 accumulation. We show that large Pb-210 excesses can be readily obtained, even for moderate ratios of degassing magma over accumulating magma, in a closed-system model where the Rn-222 atoms produced by decay of Ra-226 in the degassing magma are continuously extracted by a gas phase. For a given duration of volatile transfer, relative Pb-210 excesses are expected to be much larger than Pb-210 deficits. This model is applied to samples from Santorini (Aegean arc) and Surtsey (Iceland) both of which show high ((210)pb/Ra-226) ratios of 6.7 and 2.3 respectively at the time of eruption. The agreement with field data suggests that Rn-222 accumulation leading to Pb-210 excesses might be a rather common process in zoned magma chambers as well as in individual lava flows, and that it can be described by a closed-system model.
ISSN: 0012-821X

hal-00496398
https://hal.archives-ouvertes.fr/hal-00496398
DOI : 10.1016/j.epsl.2010.02.048

Éditeur(s) : HAL CCSD
Résumé : One of the major challenges in forest ecology is to understand the ecology, physiology and potential responses of the> 250000 species of vascular plants of the planet through the categorization of this diversity into functional groups. This approach is essentially based on functional traits analysis, but few investigations were made in tropical areas. The aim of this study was to determine functional groups in two contrasted tropical ecosystems, dry (DF) and mountain rain (MRF) forest (respectively rainfall of 1 200 mm/year and 10 000 mm/year). Guadeloupe Island in FWI presents both these ecosystems spread over less 100 km. In a first time, we developed an original species typology based on 7 "soft" traits, easy to measure (stomatal density, leaf trichom density, chlorophyll content, leaf nitrogen content, specific leaf area, wood density, leaf area, plant height). The method was based on principal component analysis (PCA) and agglomerative hierarchical clustering (AHC) applied to these traits measured at the individual level (Blazy et al., 2009). In a second time, we evaluated the relevance of these soft trait-based groups compared to a typology based on 5 "hard" ecophysiological traits, more costly to quantify but with higher functional significance (difference between predawn and minimum leaf water potential, stomatal conductance, maximal carbon assimilation rate, leaf water potential at 90% of loss of stem hydraulic conductivity). When performed on the dominant canopy species in DF and MRF (a total of 13 species and 60 mature individuals), the typological approach based on soft traits seems relevant to discriminate groups with a distinct functional reality. Through both ecosystems, we obtained 4 homogenous groups. Two were exclusively composed by DF's or MRF's species, indicating that a functional strategy can be linked to specific environmental conditions. The two other groups showed a mix of DF and MRF species indicating that different functional strategies can coexist in the same environment. These mixed groups seem distinct by their ecophysiological features, particularly in term of hydraulic characteristics. One group was composed by drought tolerant species, water spender species, with a high xylem embolism resistance, whereas the second one was composed by water saver species, less resistant to embolism. Therefore, a determination of functional groups based on soft traits could be useful to model ecosystem's responses to environmental changes on a global scale.
Book of Abstracts - isem 2013 - Ecological Modelling for Ecosystem Sustainability
Toulouse, France

hal-00964668
https://hal.archives-ouvertes.fr/hal-00964668

Éditeur(s) : HAL CCSD
Résumé : International audience
Systemic Antifungal therapy (SAT) of invasive candidiasis (IC) needs to be started immediately upon clinical suspicion. Controversies exist then about potential harms from antifungal de-escalation (DE).(1) in cases of documented IC, early DE to fluconazole is recommended by US guidelines but discouraged in EU guidelines. in non-documented IC, no data are available to guide SAT DE. These questions are key issues however as the relationship between antifungal use and Candida antifungal resistance has been repeatedly demonstrated.
Intensive Care Medicine Experimental

hal-01334073
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01334073
DOI : 10.1186/2197-425X-3-S1-A5
PUBMED : 27290057

Éditeur(s) : HAL CCSD Landes Bioscience
Résumé : International audience
In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
Autophagy

hal-00735751
https://hal.archives-ouvertes.fr/hal-00735751
PUBMED : 22966490

Éditeur(s) : HAL CCSD Elsevier
Résumé : Carbon emission at volcanic centers requires a constant balance between output (mostly by volcanism, either at plate boundaries or intraplate) and input (mostly at trench settings) of carbon from and to the Earth's mantle. The form of carbon that resides in the mantle is controlled by depth (pressure) and oxygen fugacity, the latter in turn depending on the depth and the concentration of iron in the mantle. In the shallow, lithospheric mantle, carbon is likely to be present in the oxidized form of CO2 (except under cratons where carbon is reduced to graphite or diamond). Below approximately 90 km, in the asthenosphere, the oxidized form of carbon is carbonate, either mineral or melt, depending on the thermal regime. At depths greater than approximately 150 km, the asthenospheric mantle is too reducing for carbon to stay in its oxidized form and only diamond is present, unless there is sufficient hydrogen to form reduced C–H fluids. Hence, the region located in the depth range of 90 to 150 km deep is where carbonatitic melts can most likely be produced and impregnate the surrounding mantle through metasomatism. The upper bound of this region is called the carbonate ledge. This limit prevents carbonate (either solid or molten) from ascending because of degassing and CO2 liberation. The lower bound is a redox front where redox melting (that is, melting caused by oxidation) may take place in an ascending portion of carbon-containing mantle. Carbonatite eruptions and presence of carbonate mineral inclusions in deep-seated diamonds provide evidence that these boundaries can be trespassed in some cases.An analysis of the experimental data that has bearing on silicate melting in the presence of carbon further shows that the carbonate ledge is a melting curve with a negative or flat Clapeyron (dP/dT) slope. In the carbonated ultrabasic (peridotite) systems, the carbonate ledge is located between ~ 2–3 GPa. The ledge divides the pressure–temperature space into a region of low-pressure silicate melt production, and a high-pressure region where carbonatites can be produced. Carbonatitic melts in equilibrium with mantle peridotite have compositions close to dolomitic (approximately equal amounts of Ca and Mg) with a general trend of becoming markedly more magnesian with increasing pressure. Calcic carbonatites may be stable at pressures < 2 GPa if clinopyroxene is absent. At mantle transition zone pressure range, there seems to be a melting temperature decrease (negative fusion slope), which may be caused by the stabilization of majoritic garnet.The carbonated basic (broadly eclogitic) system is more complex than the peridotitic one, because of the strong control of bulk silicate composition on melting temperatures, and hence, on melt composition. In carbonated eclogite systems, we propose that the effect of bulk composition upon all observed features can perhaps be related to silica super-saturation, or lack thereof. In some cases, high calcium (> 80 mol% CaCO3) melts can be produced, making the melting of carbonated eclogites an appealing scenario for the genesis of calcio-carbonatites in the Earth's mantle. Comparison with modeled pressure–temperature paths of subducted oceanic lithosphere shows that fusion of carbonated eclogite at depths shallower than 200 km should be expected for hot (Cascadian-type) subduction thermal regimes. On the other hand, in the case of cooler thermal regimes (Honshu-type, for instance), subducted carbonates may be stable to greater depths in Earth at trench settings, depending on the bulk composition of the system.Furthermore, high-pressure experiments show evidence of a continuum among carbonatitic, kimberlitic, melilititic, and basaltic liquids, for increasing melting degree of carbonated peridotite. This continuum has not been documented in the case of fusion of carbonated eclogite. It may be present, however, when certain sediments are fused, although the silicate melts are granitic to rhyodacitic instead of being kimberlitic in composition. Additional high-pressure work on phase relations in the simple binary system CaCO3–MgCO3 and specific focus on oxide solubility in the vapor phase have the potential to further clarify phase relations on complex silicate–carbonate systems at mantle conditions.
ISSN: 0009-2541

hal-01277770
https://hal.archives-ouvertes.fr/hal-01277770
DOI : 10.1016/j.chemgeo.2015.05.018

Éditeur(s) : HAL CCSD Intech
Résumé : International audience
The socio-economic status (SES) of populations has an influence on the incidence or mortality rates of numerous health outcomes, among which respiratory diseases (Prescott et al., 2003; Ellison-Loschmann et al., 2007). Considering asthma, the possible contribution of SES to overall prevalence –regardless of asthma severity-, remains controversial in industrialized countries. Several studies indicate that allergic asthma is more prevalent in more well-off populations whereas the non-allergic forms of asthma are more common in the deprived ones (Cesaroni et al., 2003; Blanc et al., 2006). On the other hand, severe asthma whatever its etiology appears to be more frequent in the latter populations, as compared to the more affluent (Basagana et al., 2004). Risk factors for exacerbations (e.g., passive smoking (Wright Subramanian, 2007), psychosocial stress (Gold & Wright, 2005), cockroach allergens (Kitch et al., 2000), and suboptimal compliance with anti-inflammatory medication (Gottlieb et al., 1995)) are generally more common among people with asthma and low SES than their better-off counterparts. These observations support the hypothesis that some factors more present in deprived populations contribute to asthma exacerbation (Mielck et al., 1996).
Air Pollution

Droits : http://creativecommons.org/licenses/by-nc-nd/
ISBN : 978-953-307-143-5
hal-01118620
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01118620
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01118620/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01118620/file/Ambient%20aire-%20chapter.pdf

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
ISSN: 0954-4879

hal-00708866
https://hal.archives-ouvertes.fr/hal-00708866
DOI : 10.1111/j.1365-3121-2011-014-x

Éditeur(s) : HAL CCSD
Résumé : For operational forecasts anticipate convective inhibition processes is as important than convective initiation processes. Based on the 15th July 2007 case study this work shows how the morning shallow convection over the Vosges is inhibited while it develops over the Black Forest. This case occurs during IOP 8b of the Convective and Orographically-Induced Precipitation Study (COPS). This international field campaign took place during the summer of 2007 over the Vosges, the Rhine Valley and the Black-Forest. The aim of this intensive observation campaign was to study various phases of convection and convective environment and improve quantitative precipitation forecasts. Thanks to GPS tomography data the study show the differences of low-level water-vapor variability between Vosges and Black-Forest. The analysis of ground based and airborne lidar data suggests the importance of dry air layers advected from the south and the influence of the mountains and diurnal cycle of mountain breeze which interfere strongly with these layers preventing the dry air to reach the eastern side of the mountain and the Black Forest. This dynamics is confirmed by models, wind profiler and radiosounding data. So we show how the inhibition of the convection over the Vosges during this case study can be explained with the water vapor variability due to advection and local boundary layer processes.
31st ICAM (International Conference on Alpine Meteorology)
Aviemore, United Kingdom

hal-00668829
https://hal.archives-ouvertes.fr/hal-00668829

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
High 3He/4He ratios in some basalts have generally been interpreted as originating in an incompletely degassed lower-mantle source1, 2, 3, 4, 5, 6, 7, 8, 9. This helium source may have been isolated at the core-mantle boundary region since Earth's accretion4, 5, 6. Alternatively, it may have taken part in whole-mantle convection and crust production over the age of the Earth7, 8, 9; if so, it is now either a primitive refugium at the core-mantle boundary8 or is distributed throughout the lower mantle7, 9. Here we constrain the problem using lavas from Baffin Island, West Greenland, the Ontong Java Plateau, Isla Gorgona and Fernandina (Galapagos). Olivine phenocryst compositions show that these lavas originated from a peridotite source that was about 20 per cent higher in nickel content than in the modern mid-ocean-ridge basalt source. Where data are available, these lavas also have high 3He/4He. We propose that a less-degassed nickel-rich source formed by core-mantle interaction during the crystallization of a melt-rich layer or basal magma ocean5, 6, and that this source continues to be sampled by mantle plumes. The spatial distribution of this source may be constrained by nickel partitioning experiments at the pressures of the core-mantle boundary.
ISSN: 0028-0836

hal-00941025
https://hal.archives-ouvertes.fr/hal-00941025
DOI : 10.1038/nature11771