Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
Although they are famous among Earth scientists, the Lherz peridotites are exposed within geological formations of the North Pyrenean Zone (NPZ) still lacking detailed investigations. Our study focuses on the metasediments of the Aulus basin hosting the Lherz peridotite body and associated ultramafic fragments of smaller size. The new data set comprises of structural analysis and detailed geological mapping of the massive Mesozoic marbles that form the prerift sequence typical of the NPZ and of the ultramafic-rich clastic breccia formations surrounding the peridotite bodies. The massive marbles display an evolution from hot and ductile to cold and brittle deformation, indicative of an exhumation process ending with the sedimentary reworking of both the deformed Mesozoic metasediments and the exhumed ultramafic rocks. Crystal Preferred Orientations (CPO) measured in the marbles support a deformation mechanism by dislocation creep of calcite, which is dominant between 400 8C and 600 8C; these deformation temperatures are within the range determined earlier by Clerc et al. (2015), using RSCM (Raman Spectroscopy of Carbonaceous Material) geothermometry. As a consequence, we better describe the transition from ductile to brittle deformation in the prerift marbles and clarify the origin of the syn-rift breccias. Due to continuous exhumation along detachments' faults, the brecciated metamorphic carbonates of the prerift NPZ sedimentary cover were passively uplifted towards shallower levels and progressively unroofed, while transported passively on the back of the exhumed ultramafic footwall. These results are consistent with the recent interpretations of the North Pyrenean peridotites as remnants of subcontinental mantle rocks exhumed within the pre-Pyrenean rift system. We emphasize the importance of tectonic decoupling between the Mesozoic sedimentary cover and the Palaeozoic basement, which leads to the juxtaposition of metamorphosed and deformed Mesozoic Please cite this article in press as: Lagabrielle Y, et al. Very high geothermal gradient during mantle exhumation recorded in mylonitic marbles and carbonate breccias from a Mesozoic Pyrenean palaeomargin (Lherz area, North Pyrenean Zone, France). C. R. Geoscience (2016), http://dx.
ISSN: 1631-0713

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01285079
https://hal-insu.archives-ouvertes.fr/insu-01285079
https://hal-insu.archives-ouvertes.fr/insu-01285079/document
https://hal-insu.archives-ouvertes.fr/insu-01285079/file/1-s2.0-S1631071315002060-main.pdf
DOI : 10.1016/j.crte.2015.11.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : We investigate experimentally the alteration of fractured class-G cement flowed by CO2-rich brine. The experiment mimics a mechanically damaged rough-walled fractured cement annulus at temperature 60 °C and pressure 10 MPa. The experiment consists of flowing a reservoir-equilibrated brine mixed with CO2 (partial pressure of 2.3 MPa) through the fracture of average aperture 14 μm at constant flow rate (100 μL min−1). This flow rate corresponds to pressure gradient representative of an average in situ hydrodynamic condition. Results indicate an intense alteration of the cement with a large removal of mass at the scale of the sample. However, the fracture alteration patterns are triggered by the initial heterogeneity of the fracture aperture; the aperture of the low aperture zones tends to decrease due to calcite precipitation whereas preferential paths develop in the zones of higher aperture associated. Nevertheless, the expected large permeability increase triggered by the mass removal is mitigated by the precipitation of a low density Si-rich amorphous material. The alteration rate will decrease with time because of the increasing distance of diffusion between the fracture where the reactants are actively renewed by advection and the portlandite and C-S-H dissolution fronts. The different zones of reaction can be adequately modeled by a simple 1D diffusion-reaction model using published kinetics coefficients and extrapolation to larger times than the experiment time can be drawn. Altogether, and in addition to the previous studies of the alteration of fractured well cement annulus, this study shows that the leakage potential is strongly controlled by the initial distribution of the aperture along the fracture: low aperture zones will tend to self-heal while localized flow in connected high aperture paths will be perennial.
ISSN: 1750-5836

hal-01346006
https://hal.archives-ouvertes.fr/hal-01346006
DOI : 10.1016/j.ijggc.2016.01.032

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
The embryonic development in Chione cancellata, from fertilization to straighthinge D-stage veliger larva, occurs in 24 h at 251C. Transmission (TEM) and scanning (SEM) electron microscopy show that morphogenetic processes result in a gastrula with two depressions, 4 h after fertilization (T014 h). Two hours later, one depression, located at the animal pole, develops into an open cave, the floor of which becomes the shell field, characterized by scarce microvilli, located below the lower face of the prototrochal pad. The invagination located at the vegetal pole is characterized by regular microvilli and constitutes the digestive tract. At T018 h, the late gastrula differentiates into a typical motile trochophore, possessing a well-developed prototroch delimiting anterior and posterior embryonic regions. At T019h, the shell field, located between the prototroch and the telotroch, appears as a saddle-shaped region with a wrinkled surface extending on both sides of the embryo, establishing bilateral symmetry. From TEM observations, the apical surface of the underlying cells possesses a modified glycocalyx featuring a dense pellicle overlapping the cells of the shell field. At T0112 h, the prototroch is displaced toward the anterior region by outgrowth of the shell material. TEM views show that the wrinkled surface observed with SEM corresponds to the periostracum, attached dorsally to the hinge and ventrally to the cells of the future mantle edge. At T0115 h, an alveolar matrix of proteinaceous material, which could contain calcite crystals, appears between the periostracum and the mantle. At T0124 h, prodissoconch I formation is completed and the D-stage larvae possess a calcified shell. At this stage of development, only one mantle fold is present, representing the outer fold. The periostracumsecreting cells are in contact with the marginal cells of the velum. This functional velum is composed of four bands of cilia. Our TEMobservations confirm previous descriptions of the velum ciliary bands obtained only from SEM analyses, such as described in other bivalves. The apical sense organ and the digestive tract are poorly developed. From observations at the ultrastructural level of shell differentiation in C. cancellata, we propose a new interpretation of shell differentiation, including hinge and ligament for bivalves as opposed to that described for gastropods.
ISSN: 1077-8306

hal-00755283
https://hal.univ-antilles.fr/hal-00755283
DOI : 10.1111/j.1744-7410.2006.00036.x

Éditeur(s) : HAL CCSD Wiley
Résumé : Clay shale landscapes are sensitive to landslide, erosion, and re-sedimentation processes. In this context, tectonized clay shales have peculiar hydrological and mechanical behaviours. In order to improve our understanding of the processes involved in such systems, an experimental site has been settled in the Draix Observatory (ORE DRAIX) on a black marl hill slope of the Southern Alps (France) in the framework of the ECOU-PREF project. The site is a natural laboratory to study the evolution of clay shale landscapes at several scales (regional to µm). In this study, we aim to characterize the internal structure and fissure patterns of a stable interfluve, in order to locate preferential water flows within the system, and anticipate its evolution. This work is based on a series of mutli-disciplinary approaches including petrophysical analyses, well pulse injection tests and downhole geophysical measurements. Borehole geophysical results were combined with laboratory measurements on core plugs (permeability, density, porosity, and acoustic velocity). Optical and acoustical images have been used as an original tool for internal discontinuities characterisation and potential active flow path detection. They allowed the identification of three main lithological units interpreted as several stages of shale alteration. In addition, several main structural plane discontinuities (open fractures, schistosity planes, and fractures infilled with calcite or clays) were identified from the images and their potential transmissivity discussed with regard to piezometric and tracer measurements. In all, the integration of measurements leads to propose a simple scenario of fluid circulation and chemical alteration of the interfluve.
ISSN: 0885-6087

hal-00757581
https://hal.archives-ouvertes.fr/hal-00757581
DOI : 10.1002/hyp.7997

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Synkinematic phyllosilicates in fault zones can be used to deduce the deformation mechanisms and the conditions of fault activity, as their chemical composition, crystal structure and texture can record the different stages of deformation and fluid-rock interactions. The Pic de Port Vieux, a second-order thrust related to the major Gavarnie thrust in the southern central part of the Pyrenees Axial Zone, juxtaposes Triassic pelites of the hanging wall and Cretaceous limestones of the footwall. In order to investigate the mineralogical and geochemical changes and constrain the deformation conditions of thrusting, characterization of phyllosilicates was performed along a transect in the fault hanging wall pelites. The Triassic pelites are mainly composed of quartz, calcite, phyllosilicates (chlorite and K-white mica) and ± hematite. The core fault zone thickness is estimated to be about one meter of intensively foliated green pelites, whereas the damage zone is composed of several meters of red pelites. XRD data demonstrated that the difference in color is related to hematite which is only present in the damage zone. Phyllosilicates of the damage zone are mainly inherited/diagenetic K-white mica and chlorite. In the core zone, newly formed chlorite is abundant and preferentially located in veins. It is enriched in Fe compared to the chlorite of the red pelites. The well-defined foliation in the core zone is overlaid by preferentially oriented muscovite grains which have homogeneous compositions, with less Na and relatively more Fe than mica from the red pelites. Newly formed chlorite and muscovite in the core zone are synkinematic to the fault activity. They are both related to deformation processes and fluid rock interactions. Kübler index measurements and chlorite thermometry show that synkinematic phyllosilicates have registered a temperature of 270°C ± 23°C for the damage zone and 285°C ± 28°C for the core zone which are corresponding to lower-anchizone/epizone grade conditions. Numerical modelling with the geochemical modelling program PhreeqC was performed to determine the favorable conditions for the mineralogical change between red and green pelites. It suggests that the main critical parameter favoring hematite dissolution and chlorite precipitation in the core zone, is the redox conditions. According to the model, the chemical changes in the core zone occurred due to interactions with highly reductive fluids. In addition, the hematite dissolution maybe the source of iron for newly formed phyllosilicates in the core zone that are more iron rich compared to those from the red pelites.
ISSN: 0169-1317

hal-01536006
https://hal.archives-ouvertes.fr/hal-01536006
DOI : 10.1016/j.clay.2017.05.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Numerical programs for simulating flow and reactive transport in porous media are essential tools for predicting reservoir properties changes triggered by CO2 underground injection. At reservoir scale, meshed models in which equations are solved assuming that constant macroscopic properties can be defined in each cells, are widely used. However, the parameterization of the dissolution-precipitation problem and of the feedback effects of these processes on the flow field is still challenging. The problem arises from the mismatch between the scales at which averaged parameters are defined in the meshed model and the scale at which chemical reactions occur and modify the pore network geometry. In this paper we investigate the links between the dissolution mechanisms that control the porosity changes and the related changes of the reactive surface area and of the permeability. First, the reactive surface area is computed from X-ray microtomography data obtained before and after a set of dissolution experiments of pure calcite rock samples using distinctly different brine-CO2 mixtures characterizing homogeneous to heterogeneous dissolution regimes. The results are used to validate the power law empirical model relating the reactive surface area to porosity proposed by Luquot and Gauze (2009). Second, we investigate the spatial distribution of the effective hydraulic radius and of the tortuosity, two structural parameters that control permeability, in order to explain the different porosity-permeability relationships observed for heterogeneous and homogeneous dissolution regimes. It is shown that the increase of permeability is due to the decrease of the tortuosity for homogeneous dissolution, whereas it is due to the combination of tortuosity decrease and hydraulic radius increase for heterogeneous dissolution. For the intermediate dissolution regime, identified to be the optimal regime for increasing permeability with small changes in porosity, the increase of permeability results from a large increase in the mean effective hydraulic radius of the sample.
ISSN: 0169-7722

hal-00617671
https://hal.archives-ouvertes.fr/hal-00617671
DOI : 10.1016/j.jconhyd.2010.07.004