Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Fractures or discontinuities perpendicular to the least stress σ3 were generated in a synthetic rock analogue (granular, frictional, cohesive, and dilatant) material in axisymmetric extension tests. These fractures are of two types defined by the mean stress σ. When σ is very small, the fractures form through the mode I cracking at tensile σ3 equal to the material tensile strength. The fracture walls have smooth surfaces. At higher σ, these surfaces become rougher, with the topography features forming faint or delicate plumose patterns. The amplitude of the plumose topography increases with σ. The axial stress σ3 at fracturing reduces in magnitude and changes in sign with the σ increase. Thus σ3 orthogonal discontinuities can form at compressive σ3. SEM observations show that these discontinuities are deformation localization bands where the material is characterized by the heterogeneous decohesion and volume and porosity increase due to dilatancy. The band thickness is several grain sizes. At formation, the bands are not opened, so they are not mode I fractures. They become fractures with plumose fractography after the separation of the sample parts along the band. The formation mechanism of these discontinuities or fractures is not completely clear, but it is suggested that it represents a running constitutive instability in the form of dilatancy banding (with further σ increase the bands become inclined to σ1, i.e., shear). The similarity between the experimentally generated plumose surface fractures and natural joints is discussed, and it is suggested that they can be formed as propagating constitutive instabilities.
ISSN: 0148-0227

hal-00585846
https://hal.archives-ouvertes.fr/hal-00585846
DOI : 10.1029/2010JB008104

Éditeur(s) : HAL CCSD Geological Society
Résumé : Gem opals from Wegel Tena, Wollo Province, Ethiopia, occur in Oligocene rhyolitic ignimbrites. They display a unique geochemistry, with some samples yielding the highest Ba concentrations ever recorded. They are generally much richer in chemical impurities than opals from other localities. For example, the sum Al+Fe or the sum Na+Mg+Ca+K+Ba are often higher. These geochemical features make them easy to distinguish from other opals worldwide. We observed strong geochemical variations and some good positive correlations in our samples, such as Al+Fe vs. Na+Mg+Ca+K+Ba, Al vs Ca, or Ba vs Ca. This shows that the crystallography of opal has controlled, at least in part, the incorporation of chemical impurities, although opal is not well-crystallized. In addition, the multimodal distributions of several chemical impurities (e.g. U vs Sr, Al vs Ca, Ba vs Ca, etc.) suggest at least two origins of silica: weathering of feldspars and weathering of volcanic glass. In addition, opals from Wegel Tena contain numerous well-preserved microscopic plant fossils. Moreover, their host rock exhibits features typical of pedogenesis (abundant clays, desiccation cracks, and grain size sorting). We propose that the opals at Wegel Tena formed during the Oligocene period when volcanic emissions stopped for a time long enough to allow weathering of ingimbrites and therefore liberation of silica. This accompanied the formation of soil and development of plant life, and some plants were trapped in opal.
ISSN: 1467-7873

hal-00767555
https://hal.archives-ouvertes.fr/hal-00767555
DOI : 10.1144/1467-7873/10-MINDEP-058

Éditeur(s) : HAL CCSD Universidad Complutense de Madrid
Résumé : The Lodève Permian synrift sequence is represented by thick stacked climate-controled playa cycles which have been constrained by structural, sedimentological, geochemical and paleontological processes. The present paper merges the different results in order to better constrain the dynamics and palaeoecologycal evolution of the playa system from Late Cisuralian to Early Lopingian time. In this depositional environment, thining upwards sheet-flood sequences represent flooding events; they are relayed by ephemeral ponding, suspension settling and limited carbonate precipitation accompanied by large amounts of shallow to subaerial sedimentary structures... (Ver más) (current and wind ripples, desiccation cracks, rain drops, etc.). The aridity of the climate contrasts with the surprising abundance of the fauna encountered into carbonate-rich silty-clay playa-lake deposits. Ephemeral pools are colonized by numerous shellfish: Choncostraca, Triopsids, and Insects, which led to intense burrowing of the overbank deposits (Scoyenia facies). Tetrapods are common and dominated by several types of reptiles after footprints: Pelycosauria, Parareptilia and Lepidosauria in the Rabejac Fm, and Mammalian reptiles (Therapsida) on the top of the fluvial deposits of the Salagou Fm near La Lieude farm. In addition, elements of a weighty herbivorous Pelycosaurian and a small amphibian Tupilakosaurid, only described in the Triassic before, have been also found in the Upper part of the Permian series of this sector.
ISSN: 1698-6180

hal-00411539
https://hal.archives-ouvertes.fr/hal-00411539

Éditeur(s) : HAL CCSD
Résumé : This thesis has been conducted on a fractured crystalline basement located in Ploemeur (South of Brittany, France). The detailed study of this basement requires a good understanding of their internal structures, namely their intrinsic properties, flow mode, density and fractures distribution. This work is focused on the petrophysical characterization of the granitic formations. Physical properties were determined from downhole geophysical measurements and images, and petrophysical measurements with thin sections made for each mini-core in the laboratory. Fresh-altered schist and fresh-altered granite separated by a normal angle fault are the main lithology of the Ploemeur crystalline basement. The results showed that the petrophysical properties were function of both porosity variation and degree of alteration and that the pore-space topology was found to be porositydependent. This thesis introduces a new formula between electrical resistivity and porosity. In addition, the laboratory measurements of Ploemeur revealed that seismic wave velocity was a function not only of porosity, but also of the predominant pore type. In general, the pore aspect ratio inverted from velocity measurements were classified roughly into crack shape. In the Ploemeur crystalline basement, the downhole geophysical measurements and images were used to measure changes in physical and chemical properties in the borehole fluid and the bedrock surrounding the boreholes. The effective integration of different geophysical methods, hydrogeological tests and lithological description was the best way to characterize the fractures in the crystalline basement, and is critical for a suitable estimation of fluid circulation.
Le socle cristallin fracturé, situé à Ploemeur (Bretagne sud, France) est l'objet de ce travail de thèse. L'étude détaillée du socle nécessite une bonne compréhension de la structure interne, à savoir les propriétés intrinsèques, le mode d'écoulement, la densité et la distribution des fractures. Ce travail de thèse est consacré à la caractérisation pétrophysique des formations granitiques. Les propriétés physiques ont été déterminées à partir de l'interprétation des données de mesures de géophysique en forage, des images de paroi du puits et des mesures pétrophysiques réalisées sur carottes en laboratoire. Afin de replacer les mesures dans leur contexte lithologique, une lame mince a été analysée pour chaque mini-carotte. Les formations lithologiques rencontrées dans le socle cristallin de Ploemeur sont des schistes et granites sains et altérés, ces deux lithologies étant séparées par une zone de faille. Les résultats ont montré que les propriétés pétrophysiques des roches étaient fonction à la fois de la variation de la porosité et du degré d'altération des roches et que la topologie de l'espace poreux était fortement dépendante de la porosité. Cette thèse introduit une nouvelle formule entre la résistivité électrique et la porosité. De plus, les mesures en laboratoire sur les échantillons de Ploemeur révèlent que les vitesses sismiques ne sont pas seulement fonction de la quantité de porosité, mais aussi fonction de facteur de forme. Ce dernier a été calculé sur les échantillons du socle de Ploemeur à partir des vitesses acoustiques. Les résultats ont montré que la porosité est de forme fissurale. L'intégration des données issues des images optiques et acoustiques, des mesures de géophysique en forage, et de la description des carottes a permis d'étudier de façon détaillée la géologie et l'hydrodynamique du socle de Ploemeur. L'intégration effective de ces différentes méthodes avec les tests hydrogéologiques ressort comme la meilleure façon de caractériser les fractures et les circulations en eau dans le socle.
https://tel.archives-ouvertes.fr/tel-00444175

Droits : info:eu-repo/semantics/OpenAccess
tel-00444175
https://tel.archives-ouvertes.fr/tel-00444175
https://tel.archives-ouvertes.fr/tel-00444175/document
https://tel.archives-ouvertes.fr/tel-00444175/file/thesebelghoul.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We report on microstructural data obtained by optical microscopy and transmission electron microscopy concerning the crystallographic relationships of serpentine minerals with their host olivine in two contrasting situations. In the first case, mesh-textured lizardite (liz) is developed in a standard 60% serpentinized oceanic harzburgite from the Oman ophiolite where olivine converts to columnar lizardite. The joined columns are perpendicular to the basal plane (001)(liz), corresponding to the pseudofibres observed optically. The plane (001)(liz) is locally parallel to the narrow boundary ol-liz; thus column orientations register the interface of serpentinization. The ol-liz relationships are not strictly topotactic, but reflect preferred cracking orientations in olivine, parallel to (010)(ol). In the second case, antigorite (atg) develops in a rare sample of antigorite schist in a kimberlite from Moses Rock (Colorado Plateau), representative of a suprasubduction-zone mantle wedge. High-resolution transmission electron microscopy (HRTEM) images along [010](atg) show domains of very regular modulation with a 43 center dot 5 A wavelength (m = 17, where m is the number of silicate tetrahedra along the wave), with few defects, indicative of HP-HT antigorite, and also heavily kinked regions as fingerprints of strong tectonic shear. TEM imaging and electron diffraction patterns reveal two topotactic relationships between antigorite and olivine: [100](atg)//[010](ol) and < 100 >(atg)//< 100 >(ol); the planes in contact are (001)(atg)//(100)(ol) and (001)(atg)//(010)(ol), respectively. The [010](atg)//[001](ol) and antigorite lamellae are parallel to the forsterite b-axis. In both cases, the topography of olivine-serpentine interfaces is controlled by open fluid pathways along microcracks oriented according to the anisotropy of the olivine aggregate. In the cases studied, the serpentine aggregate exhibits a preferred orientation inherited from that of the peridotite. These results have some relevance to the seismic anisotropy of serpentinized mantle. Anisotropy of propagation of seismic waves as a result of the olivine fabric is maintained and reinforced with the development of lizardite. Conversely, the development of antigorite produces a trench-parallel fast S-wave polarization and an anisotropy that is lowered at low degrees of serpentinization and then increased with increasing serpentinization.
ISSN: 0022-3530

hal-00456061
https://hal.archives-ouvertes.fr/hal-00456061
DOI : 10.1093/petrology/egp049

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The characteristic frequencies at which two different melt-related attenuation mechanisms occur in partially molten gabbronorite are computed as a function of aspect ratios of the melt-filled cracks, and the melt viscosity. The computations were done for basaltic and andesitic melts. The melt viscosity is constrained by (i) laboratory measurements performed in the range 10(8)-10(14) Pa s with a creep apparatus and in the range 10(-1) to 10(5) Pas with a rotational Couette viscorneter, and (ii) modeling of viscosity at high temperatures. The results of the characteristic frequency calculations suggest that melt squirt flow is a viable attenuation mechanism at seismic frequencies for aspect ratio of melt inclusions in the range 10(-1) to 10(-2) for the andesite, and 10(-4) to 10(-3) for the two basalts.
ISSN: 0031-9201

hal-00412014
https://hal.archives-ouvertes.fr/hal-00412014
DOI : 10.1016/j.pepi.2008.04.010

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
French Guiana is a South American French territory, where HIV prevalence consistently exceeds 1% in the adult population. In the only correctional facility, HIV prevalence fluctuates at around 4%.
After describing the population of HIV-positive inmates, we aimed to evaluate mortality after release from the correctional facility, and to identify its predictive factors.
Outside North American settings, data on treatment outcome and vital status of HIV-positive former inmates are scarce. There were no data in French Guiana. Filling this gap represents a basis for potential improvements.
All HIV-infected adults released from an incarceration of 30 days or more, between 2007 and 2013, were enrolled in a retrospective cohort study. Mortality was described over time, one to seven years following release, using Kaplan-Meier estimates. Factors associated with mortality were identified through a non-parametric survival regression model.
147 former inmates were included. The male to female ratio was 4.4. The median age was 37.3 years. The majority were migrants, 25.8% were homeless, 70.1% suffered from substance abuse, with 34.0% of crack-cocaine users. On admission, 78.1% had an early HIV-stage infection (CDC-stage A), with a median CD4 count of 397.5/mm3, 34.0% had one comorbidity, mainly hypertension. Upon release, 50.3% were on ART. Reasons for not being treated were not fulfilling the criteria for 74.6%, and refusing for 15.1%. Before release, 84.5% of the patients on ART had a viral load≤200cp/ml. After release, 8.2% of the cohort had died, with a crude incidence of 33.8/1000 person-years. All recorded deaths were males, with an incidence of 42.2/1000 person-years. Comparing with the age-specific mortality rates for males in French Guiana, the standardized mortality ratio was 14.8. In multivariate analysis, factors associated with death were age and CD4 count before release.
Despite access to ART while incarcerated, with good virological outcome, the post-release mortality was very high for males, almost 15 times what is observed in the general male population living in French Guiana, after age standardization. Access to ART in correctional facilities may be a necessary, but not sufficient condition to protect male inmates from death after release.
ISSN: 1932-6203

inserm-01519987
http://www.hal.inserm.fr/inserm-01519987
http://www.hal.inserm.fr/inserm-01519987/document
http://www.hal.inserm.fr/inserm-01519987/file/2017%2C%20Huber%20-%20Mortality%20HIV%20prisoners%20after%20release.pdf
DOI : 10.1371/journal.pone.0175740.t002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Fault friction is a parameter that is difficult to assess along fault zones since its determination depends on the knowledge of any factor controlling the state of stress around faults. In brittle homogeneous rocks, a limited number of these factors, such as the shape of the fault surface, the vicinity of fault tips or the remote stress ratio, are crucial to constrain for this determination. In this paper, we propose to analyse a field example in which all these properties are met and where the nature of the slipped structure suggest differences in static friction. We compare the orientations of branching fractures at strike-slip relay zones between en echelon stylolites and en echelon joints both reactivated in shear. The field data are compared with both photoelastic and 3-D numerical models that consider the remote stress conditions and the role of the geometry of the strike-slip segments. Based on field observations, these analyses quantitatively demonstrate the significant role of fault friction on the local stress field orientation and subsequent fracture formation. This work points out that estimations of fault friction based on analyses of fracture patterns or in situ stresses must be accompanied with a thorough investigation of the 3-D fault shape, its segmentation and the remote stress state.
ISSN: 0191-8141

hal-00560999
https://hal.archives-ouvertes.fr/hal-00560999
DOI : 10.1016/j.jsg.2010.01.008

Éditeur(s) : HAL CCSD Pergamon
Résumé : This paper presents an experimental study of the deformation of Beaucaire marl subjected to drained triaxial tests under a wide range of confining pressure. Several methods of observation have been used: X-ray computed tomography, scanning electronic microscopy, quantitative image analysis of thin sections and mercury porosimetry. The analysis at the grain scale shows the existence of various deformation modes depending on the mean stress level. These modes are classified with reference to the brittle and ductile regimes. In specimens deformed under low confining pressure, macro-cracks are localised in a band more contracting than the rest of the specimen. In specimens deformed under moderate confining pressure, a series of micro-scale shear bands characterised by a grain re-orientation towards the direction of macro-shear is detected in the zones of localised deformation. The material in between the micro-scale shear bands is contracting more than the rest of the specimen in some cases; in other cases, a schistosity is detected also in the rest of the specimen outside the localisation zones. In the specimen deformed under high confining pressure, no localisation occurs, and a schistosity is observable throughout the specimen.
ISSN: 1365-1609

hal-00411208
https://hal.archives-ouvertes.fr/hal-00411208
DOI : 10.1016/j.ijrmms.2007.08.007

Résumé : Pour beaucoup de cultures, un sol non travaillé est une alternative de plus en plus crédible au travail intensif du sol, en particulier pour des raisons environnementales. Mais l’ananas (ananas comosus) présente un enracinement fragile très sensible à la structure, ce qui motive souvent un travail important du sol avant plantation. L’alternative d’une plantation sans travail du sol ne va donc pas de soi. L’objet de cette thèse est de répondre à la question de la faisabilité d’une culture d’ananas sans travail du sol, en remplaçant ce dernier par une plante de service « décompactante » dont les traits racinaires seraient favorables à la (re)structuration d’un sol compact. Le travail de cette thèse a donc porté sur l’évaluation de plusieurs espèces candidates, puis sur l’étude, au champ, des effets sur le sol de la plus prometteuse (Stylosanthes guianensis ). Enfin, dans le cadre d’un essai au champ comparant un système de culture innovant ananas sans travail du sol, on a étudié l’effet de la plante de service sur le fonctionnement de la culture de l’ananas. Dans un premier essai, c’est le Stylosanthes guianensis qui, comparé à huit autres espèces (Arachis pintoï, Brachiaria decumbens, Cajanus cajan, Crotalaria juncea, Cynodon dactylon, Eleusine coracana, Pueraria phaseoloides, et le maïs), a montré les traits racinaires les plus favorables à la structuration d’un sol compact. Les valeurs supérieures du diamètre racinaire moyen et de la densité de longueur racinaire (DRL) caractérisent les principaux traits impliqués. Dans un deuxième essai, les mesures de conductivité hydraulique, d’indice des vides du sol et d’analyse d’images de blocs de sol imprégné sur la répartition surfacique des différents types de porosité ont montré que la culture du Stylosanthes guianensis avait augmenté l’indice des vides du sol et provoqué l’apparition d’une porosité fissurale de grande taille, contribuant ainsi à l’amélioration de la structure du sol. Enfin, un troisième essai mettant en comparaison (i) un système de culture innovant où la culture d’ananas est implantée sans travail du sol après une culture de S. guianensis restructurante et (ii) un système conventionnel comportant un travail profond du sol (et pas de plante de service) a montré que le rendement en fruit est similaire dans les deux systèmes. Cet essai a permis de vérifier que l’enracinement de l’ananas en condition de sol non travaillé bénéficiait du précédent S. guianensis.
For many crops, direct drilling is a well-tried alternative facing the damaging effects of intensive tillage, mainly for environmental causes. But, pineapple (ananas comosus), presents a fragile rooting system which is very sensitive to soil structure. This leads frequently to intensive soil tillage before planting. Direct drilling is not so evident. The aim of this thesis is to give an answer to the feasibility of a no till system for pineapple cultivation, by using a plant with favorable roots traits for compacted soil (re)structuration. This work consisted in evaluating several candidate species, followed by the study, on the field, of the effects the most promising on soil (Stylosanthes guianensis). Finally, through a field experiment, comparing an innovating no till pineapple cultivation system we studied the use effects of Stylosanthes guianensis on the pineapple crop functioning. In a first experiment, Stylosanthes guianensis compared with eight other species (Arachis pintoï, Brachiaria decumbens, Cajanus cajan, Crotalaria juncea, Cynodon dactylon, Eleusine coracana, Pueraria phaseoloides and corn) showed better roots traits for structuring a compacted soil. Measures of average root diameter and root length density are the main implicated roots traits. In a second experiment, the measures of hydraulic conductivity, of the soil void ratio and the analysis of blocks of resin-impregnated soil on the surface distribution of the different type of porosity, all of this showed that Stylosanthes guianensis had increased the soil void ratio and had caused the creation of large-sized cracked porosity, thus contributing to the improvement of the soil structure. Finally, a third experiment involving a comparison between (i) an innovating cultivation system where pineapple is growing in a no till soil after a structuring crop of S. guianensis and (ii) a conventional system with deep tillage (without structuring crop), showed similar fruit yield. This experiment showed evidence that the rooting of pineapple in no till soil benefited from the previous Stylosanthes.

http://www.theses.fr/2014AGUY0725/document

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Serpentinization of olivine-rich troctolite from core 227, Integrated Ocean Drilling Program (IODP) Hole U1309D ranges from 10 to 90. Two episodes of serpentinization are recognized. The first, dominant in weakly serpentinized samples, is an approximately isochemical (except for water) replacement of olivine (Fo(8485)) by a mixture of serpentine (antigorite, Mg-number 92) and brucite (amakinite-rich; Mg-number 65). The compositions of the minerals in type 1 veins are a reflection of FeMg exchange between olivine and the brucite serpentine formed during early serpentinization. The early serpentinite veins (type 1) are thin ( 005 mm), irregular, and exploit pre-existing cracks in olivine. The presence of antigorite suggests that early serpentinization occurred at T 300C. Type 1 veins reflect rock-dominated serpentinization, became isolated early in their history, and persist as relicts in all but the most altered samples. The main episode of serpentinization is manifested by through-going lizardite (average Mg-number 96)magnetite veins (type 2). Type 2 veins define an anastomosing foliation, may be several millimeters in width and appear to exploit pre-existing, favorably oriented type 1 veins. Type 2 veins reflect open-system serpentinization. Magnetite in these veins formed by oxidation of the Fe in brucite and serpentine, whereas addition of silica to the system converted the Mg-component of the brucite to serpentine. Magnetite forms one or more distinct bands in the interior of the vein and is never in direct contact with relict olivine. A bruciteserpentine mixture, similar to that found in type 1 veins, but with lizardite instead of antigorite, is commonly present at the margins of type 2 veins (i.e. where they are in reaction contact with relict olivine). We interpret type 2 veins as a steady-state system where brucite continually forms at the olivinevein contact and then reacts out in the interior of the vein. This continual formation and destruction of brucite imposes an exceptionally low a(SiO2) on the system. Magnetite and olivine are never in contact in type 2 veins (or anywhere else) because the olivine-out reaction yields ferroan brucite and not magnetite. The desilication of serpentine in the type 2 veins is a reflection of the inherent instability of Fe-rich serpentine with respect to magnetite at low silica activity. Thus, the composition of serpentine in equilibrium with magnetite in serpentinites is a function of serpentinemagnetite and not serpentineolivine equilbria.
ISSN: 0022-3530

hal-00420931
https://hal.archives-ouvertes.fr/hal-00420931
DOI : 10.1093/petrology/egp004