Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
ISSN: 0003-4975

hal-01563338
http://hal.univ-brest.fr/hal-01563338
DOI : 10.1016/j.athoracsur.2016.03.093
PUBMED : 27262916

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Aims: The aims of this study were to compare short-and long-term outcomes for clinical T2N0 oesophageal cancer with analysis of (i) primary surgery (S) versus neoadjuvant therapy plus surgery (NS), (ii) squamous cell carcinoma and adenocarcinoma subsets; and (iii) neoadjuvant chemoradiotherapy versus neoadjuvant chemotherapy.Methods: Data were collected from 30 European centres from 2000 to 2010. Among 2944 included patients, 355 patients (12.1%) had cT2N0 disease; 285 (S) and 70 (NS), were compared in terms of short-and long-term outcomes. Propensity score matching analyses were used to compensate for differences in baseline characteristics.Results: No significant differences between the groups were shown in terms of in hospital morbidity and mortality. Nodal disease was observed in 50% of S-group at the time of surgery, with 20% pN2/N3. Utilisation of neoadjuvant therapy was associated with significant tumour downstaging as reflected by increases in pT0, pN0 and pTNM stage 0 disease, this effect was further enhanced with neoadjuvant chemoradiotherapy. After adjustment on propensity score and confounding factors, for all patients and subset analysis of squamous cell and adenocarcinoma, neoadjuvant therapy had no significant effect upon survival or recurrence (overall, loco-regional, distant or mixed) compared to surgery alone. There were no significant differences between neoadjuvant chemotherapy and chemoradiotherapy in short-or long-term outcomes.Conclusion: The results of this study suggest that a surgery alone treatment approach should be recommended as the primary treatment approach for cT2N0 oesophageal cancer despite 50% of patients having nodal disease at the time of surgery.
ISSN: 0959-8049

hal-01666517
https://hal.univ-lorraine.fr/hal-01666517
DOI : 10.1016/j.ejca.2015.11.024

Éditeur(s) : HAL CCSD Publibook
Résumé : L’association ADJC est née en 2014 de la volonté de favoriser les liens entre doctorant.e.s, jeunes chercheur.e.s et les divers membres de la communauté universitaire et scientifique de l’Université des Antilles.Elle se compose de doctorant.e.s, de jeunes chercheur.e.s et ami.e.s de l’association.Ses principaux objectifs :- Fédérer les doctorant.e.s, rompre l’isolement, créer des liens.- Promouvoir les études doctorales dispensées au sein de l’université.- Accompagner les doctorant.e.s dans leur projet de recherche et professionnel- Valoriser leurs travaux scientifiques auprès du plus grand nombre, étudiants, citoyens, décideurs économiques et politiques.
International audience
La deuxième édition de la Journée d'Études Scientifiques (J.E.S) de l'association Ansanm Doctorant.e.s et Jeunes Chercheur.e.s s'est tenue le 21 avril 2016, en prenant pour thématique celle qui porte le nouvel intitulé des Écoles doctorales de l'Université des Antilles : « La recherche scientifique en milieu insulaire tropical ». Les présentations pluridisciplinaires sur lesquelles reviennent ces actes ont dessiné les contours de territoires en mouvement, marqués par la complexité et la richesse de leurs biodiversités, leurs histoires et leurs cultures.
https://hal.archives-ouvertes.fr/hal-01575329

ISBN : 9782753904538
hal-01575329
https://hal.archives-ouvertes.fr/hal-01575329

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Apatite fission track analysis (AFTA) data are used to bring new light on the long-term and recent history of the Baikal rift region (Siberia). We describe the evolution of the topography along a NW-SE profile from the Siberian platform to the Barguzin range across the Baikal-southern Patom range and the northern termination of Lake Baikal. Our results show that the Baikal-Patom range started to form in the Early Carboniferous and was reactivated in Middle Jurassic-Lower Cretaceous times during the orogenic collapse of the Mongol-Okhotsk belt. Samples located in the Siberian platform recorded a continuous sedimentation up to the early Carboniferous but remain unaffected by later tectonic episodes. The Barguzin basin probably started to form as early as Late Cretaceous, suggesting a continuum of deformation between the postorogenic collapse and the opening of the Baikal Rift System (BRS). The initial driving mechanism for the opening of the BRS is thus independent from the India-Asia collision. AFTA show a late Miocene-early Pliocene increase in tectonic extension in the BRS that confirms previous thoughts and might reflect the first significant effect of the stress field generated by the India-Asia collision.
ISSN: 0278-7407

hal-00420895
https://hal.archives-ouvertes.fr/hal-00420895
DOI : 10.1029/2008TC002404

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : Extension fractures of two types defined by the mean stress σ were generated in a synthetic rock analogue material. When σ is very small, the fractures are mode I cracks with smooth surfaces. At higher σ, these surfaces have plumose topography, with the amplitude increasing with σ. Both SEM observations and mechanical measurements show that fractures/discontinuities in the latter case are initiated as dilatancy localization bands. They form under tensile or slightly compressive normal stress and can be seen as running constitutive instabilities. The similarity between the plumose fractography of the experimental fractures and natural joints suggests similarity in the formation mechanism.
ISSN: 1631-0721

hal-00585886
https://hal.archives-ouvertes.fr/hal-00585886
DOI : 10.1016/j.crme.2011.01.002

Éditeur(s) : HAL CCSD
Résumé : International audience
Experimental, and Numerical Studies of Deformation Localization Bands
EOS

hal-00667412
https://hal.archives-ouvertes.fr/hal-00667412

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Both oedometric and plane-strain tests were performed with parallelepipedic samples made of synthetic granular, cohesive, frictional and dilatant rock analogue material GRAM2. For the first time parallel sets of fractures that have all the characteristics of natural joints were reproduced in the laboratory. The fractures are regularly spaced, normal to σ3, and have plumose morphology very similar to that of natural joints. These fractures can form at tensile stress σ3 much smaller in magnitude than the tensile strength of material and even at slightly compressive σ3. When mean stress σ exceeds a certain value, the fractures become oblique to σ1 (the obliquity increases with σ), forming networks of conjugate shear bands/fractures. These results of plane-strain experiments are in good agreement with those of better controlled conventional axisymmetric tests on a similar material in Chemenda et al. (2011b) and are closer to real geological situations. Both types of experiments are complementary. Their results lead to the conclusion that at least certain categories of natural fractures (including joints, and conjugate shear fractures/bands) were initiated as deformation localization bands. The band orientation is defined by the constitutive properties/parameters (notably the dilatancy factor) that are sensitive to σ.
ISSN: 0040-1951

hal-00795555
https://hal.archives-ouvertes.fr/hal-00795555
DOI : 10.1016/j.tecto.2011.11.021

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Plio-Pleistocene diatomitic sequences in the Shamb paleo-lake (South Armenia, Lesser Caucasus) offer a rare opportunity to give new insights on the paleo-climate of Western Asia. We present an integrated palynological, 40Ar/39Ar geochronologic and magnetostratigraphic study for the most complete section in the sedimentary deposits of the Shamb paleo-lake. 40Ar/39Ar dating of two volcaniclastic layers provided ages of 1.24 ± 0.03 and 1.16 ± 0.02 Ma (2. Magnetostratigraphic data show that the entire Shamb section is of reversed polarity which, combined with 40Ar/39Ar dating, suggests that the entire section correlates with part of the Matuyama period (1.785-1.070 Ma). Pollen assemblages and macroremains diversity clearly show an alternation of glacial and interglacial phases. Age calibrations and accumulation rate extrapolation allow a direct correlation of climate changes with the global isotopic curve, and show that the Shamb section probably ranges from approximately 1.300 to 1.080 Ma (marine isotopic stages 40 to 31). The vegetation of the Lesser Caucasus developed in a mosaic pattern in a Pleistocene continental, mostly arid climate, comparable to the present-day climate. The observed vegetation changes record a dominant climate response to the obliquity orbital parameter, but the influence of precession could not be established from the Shamb data. Pollen and macroflora both indicate that glacial periods were cold and dry and that interglacials were warm with local humidity. The early Pleistocene climatic model for Western Asia is thus similar to the climatic model for the Mediterranean area.
ISSN: 0012-821X

hal-00470353
https://hal.archives-ouvertes.fr/hal-00470353
DOI : 10.1016/j.epsl.2010.01.007

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Fractures or discontinuities perpendicular to the least stress σ3 were generated in a synthetic rock analogue (granular, frictional, cohesive, and dilatant) material in axisymmetric extension tests. These fractures are of two types defined by the mean stress σ. When σ is very small, the fractures form through the mode I cracking at tensile σ3 equal to the material tensile strength. The fracture walls have smooth surfaces. At higher σ, these surfaces become rougher, with the topography features forming faint or delicate plumose patterns. The amplitude of the plumose topography increases with σ. The axial stress σ3 at fracturing reduces in magnitude and changes in sign with the σ increase. Thus σ3 orthogonal discontinuities can form at compressive σ3. SEM observations show that these discontinuities are deformation localization bands where the material is characterized by the heterogeneous decohesion and volume and porosity increase due to dilatancy. The band thickness is several grain sizes. At formation, the bands are not opened, so they are not mode I fractures. They become fractures with plumose fractography after the separation of the sample parts along the band. The formation mechanism of these discontinuities or fractures is not completely clear, but it is suggested that it represents a running constitutive instability in the form of dilatancy banding (with further σ increase the bands become inclined to σ1, i.e., shear). The similarity between the experimentally generated plumose surface fractures and natural joints is discussed, and it is suggested that they can be formed as propagating constitutive instabilities.
ISSN: 0148-0227

hal-00585846
https://hal.archives-ouvertes.fr/hal-00585846
DOI : 10.1029/2010JB008104

Éditeur(s) : HAL CCSD Elsevier
Résumé : To contribute to the understanding of how opening-mode fractures (joints) form and open or close at depth in layered rocks, we present a 2D numerical study aiming to determine whether tensile stress can develop in pre-fractured elastic multilayers submitted to biaxial compressive strain conditions. First, we investigate the role of the elastic and geometrical properties of the layers on the development of tensile stress in models with five bonded layers and containing one open fracture in the central layer. Our results indicate that, in absence of elastic contrast (in Young's modulus) between the layers, no tensile stress develops in the models. However, when the fractured layer is stiffer than the two adjacent layers directly above and below, a lobe of horizontal tensile stress develops centered on the pre-existing fracture. The creation of this tensile stress is contingent upon the partial closing of the fracture. The levels of tensile stress and the thickness of the lobe of tensile stress increase logarithmically with an increase in the elastic contrast and are systematically larger for a larger Soft/Stiff ratio (ratio of the total thickness of the soft layers with the total thickness of the stiff layers). Second, we investigate the role of fracture interaction in the development of tensile stress in models containing a pair of open fractures. We observe that the levels of tensile stress in the region between the fractures are systematically higher than those observed in identical models containing a single fracture. This increase in tensile stress is very large for small elastic contrasts between the layers but diminishes when the elastic contrast increases. Furthermore, the spacing between the pre-existing fractures plays an important role in the stress distribution in the region between them. When the fracture spacing is equal to or lower than 1.15 times the height of the fractured layer for the experimental conditions chosen, the lobes of tensile stress centered on the fractures coalesce. This results in the formation of vast areas of tensile stress in models under remote compressive loading conditions. Such tensile areas are likely to allow the initiation and propagation of subsequent opening-mode fractures. The results obtained provide new insights into the formation of joints in layered rocks in compressive environments, with important consequences on fluid flow.
ISSN: 0040-1951

hal-00407576
https://hal.archives-ouvertes.fr/hal-00407576
DOI : 10.1016/j.tecto.2006.12.003

Éditeur(s) : HAL CCSD American Society for Investigative Pathology
Résumé : International audience
Recent studies suggest that psoriasis may be more severe in patients with nonalcoholic fatty liver disease, particularly in those with the inflammatory stage of steatohepatitis [nonalcoholic steatohepatitis (NASH)]. Herein, we investigated the impact of diet-induced steatohepatitis on the severity of imiquimod-induced psoriasiform dermatitis. Mice fed with a high-fat diet developed steatohepatitis reminiscent of human NASH with ballooning hepatocytes and significant liver fibrosis. Mice with steatohepatitis also displayed moderate cutaneous inflammation characterized by erythema, dermalinfiltrates of CD45(+) leukocytes, and a local production of IL-17A. Moreover, steatohepatitis was associated with an epidermal activation of caspase-1 and cutaneous overexpression of IL-1 beta. Imiquimod-induced psoriasiform dermatitis was exacerbated in mice with steatohepatitis as compared to animals fed with a standard diet. Scale formation and acanthosis were aggravated, in correlation with increased IL-17A and IL-22 expression in inflamed skins. Finally, intradermal injection of IL-17A in standard diet-fed mice recapitulated the cutaneous pathology of mice with steatohepatitis. The results show that high-fat diet induced steatohepatitis aggravates the inflammation in psoriasiform dermatitis, via the cutaneous production of IL-17A. In agreement with clinical data, this description of a novel extrahepatic manifestation of NASH should sensitize dermatologists to the screening and the management of fatty liver in psoriatic patients.
ISSN: 0002-9440

hal-01390977
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01390977
DOI : 10.1016/j.ajpath.2016.05.012
PUBMED : 27423696

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Fault friction is a parameter that is difficult to assess along fault zones since its determination depends on the knowledge of any factor controlling the state of stress around faults. In brittle homogeneous rocks, a limited number of these factors, such as the shape of the fault surface, the vicinity of fault tips or the remote stress ratio, are crucial to constrain for this determination. In this paper, we propose to analyse a field example in which all these properties are met and where the nature of the slipped structure suggest differences in static friction. We compare the orientations of branching fractures at strike-slip relay zones between en echelon stylolites and en echelon joints both reactivated in shear. The field data are compared with both photoelastic and 3-D numerical models that consider the remote stress conditions and the role of the geometry of the strike-slip segments. Based on field observations, these analyses quantitatively demonstrate the significant role of fault friction on the local stress field orientation and subsequent fracture formation. This work points out that estimations of fault friction based on analyses of fracture patterns or in situ stresses must be accompanied with a thorough investigation of the 3-D fault shape, its segmentation and the remote stress state.
ISSN: 0191-8141

hal-00560999
https://hal.archives-ouvertes.fr/hal-00560999
DOI : 10.1016/j.jsg.2010.01.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present comparative field studies in folded areas (Southern France. Moroccan Western Atlas and Abruzzo, Italy) giving new insights into fracture distribution within folded rocks of the shallow brittle crust. We show that the curvature in folds formed in brittle mechanical units is usually accommodated by multiple "dip-domain boundaries" (appearing as curvature discontinuities at fold scale) corresponding to relatively narrow and dense fracture zones, striking parallel or slightly oblique to the fold axis. They separate "dip-domains" where curvature is absent or moderate. It is shown that the dip-domain boundaries (which are obvious in the case of kink folds or box-fold anticlines) are currently present as multiple subtle hinges even when the curvature appears continuous at first sight. The nature of dip-domain boundaries is studied, they often cut through the whole thickness of the mechanical units Their internal structure varies, and a non-exhaustive typology is proposed For each type, an interpretative kinematic scenario shows how the dip-domain boundaries could initiate and develop. We suggest two kinds of origins (1) they could correspond to the reactivation of inherited, along-strike fracture zones (opening-mode fracture concentrations such as big joints, fracture corridors. Inherited faults, etc), (2) they could be created as mechanical instabilities during the fold formation (syn-folding origin), in particular through small reverse faults. In both cases, early zones of weakness localize the dip-domain boundaries, and control the Increase in curvature in association with increasing fracture density within the boundary. Because they represent well-defined vertically and axially persistent sub-seismic fracture zones generally limited to the thickness of the folded unit, dip-domain boundaries could enhance the axial permeability of folded and fractured reservoirs.
ISSN: 0191-8141

hal-00512651
https://hal.archives-ouvertes.fr/hal-00512651
DOI : 10.1016/j.jsg.2010.03.002

Éditeur(s) : HAL CCSD Geological Society
Résumé : Extensional basins often evolve both with the generation of normal faults at all scales, and with tilting in the hanging walls and footwalls of major structures. This paper examines the effect of regional tilting on the development of normal fault arrays in an anisotropic sequence, using the asymmetric Lodève Basin, France, as a case study. The orientation range of normal faults is found not to match that expected by continued symmetric generation of conjugate normal faults during tilting. Instead, continued generation of new faults preferentially occurred for faults dipping opposite to the direction of tilt, with propagation perpendicular to bedding. The presence of early bedding-perpendicular joints in the competent sandstone units aided propagation of these faults during tilting and this preferential asymmetric development. Bedding-parallel slip surfaces were activated as normal faults during the later stages of bedding tilting, showing complex interaction patterns with later faults downthrowing in the direction opposite to bedding tilting. Hence knowledge of the timing between tilting of the strata and deformation helps in evaluating the likely complexity of fault arrays at subseismic scales in extensional basins, and may also help in understanding the evolution of fault systems in tilted normal fault blocks at the reservoir scale.
ISSN: 0016-7649

hal-00404753
https://hal.archives-ouvertes.fr/hal-00404753
DOI : 10.1144/0016-76492006-047