Éditeur(s) : HAL CCSD Elsevier
Résumé : Differentiation of the Earth's mantle and formation of continental and oceanic crust occur principally through partial melting and extraction of basaltic melt. Among the mantle rocks occurring at the Earth's surface, as tectonically-emplaced massifs, abyssal peridotites or xenoliths, the harzburgites (< 5% clinopyroxene) are widely considered as refractory mantle residues left after extraction of a basaltic component. In contrast, the most fertile lherzolites (15% clinopyroxene) are generally regarded as pristine mantle, only weakly affected by partial melting. In this paper we present new convergent structural and geochemical data from the Lherz massif, the type-locality of lherzolite, indicating that the lherzolites from Lherz do not represent pristine mantle. Detailed structural mapping clearly shows that the lherzolites are secondary rocks formed at the expense of the harzburgites. Variations of major, minor and trace elements through the harzburgite–lherzolite contacts indicate that the lherzolites were formed through a refertilization process involving interaction of refractory, lithospheric mantle with upwelling asthenospheric partial melts. Combined with previously published indications of refertilization in orogenic peridotites, our new observations in Lherz suggest that most lherzolite massifs represent secondary (refertilized) rather than pristine mantle. Together with geochemical data on mantle xenoliths, this indicates that melt transport and melt-rock reaction play a key role on the rejuvenation and erosion of the lithospheric mantle.
ISSN: 0012-821X

hal-00406433
https://hal.archives-ouvertes.fr/hal-00406433
DOI : 10.1016/j.epsl.2007.05.026

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The East Sayan ranges are a key area to understand the interactions between the transpressive deformation linked to the far-field effects of the India-Asia collision and the extension linked to the opening of the Baikal Rift System. The active deformation that affects this range is very recent (around 5 Ma) but occurs in a very complex morphotectonic setting and the understanding of the Tertiary deformation relies entirely on a detailed knowledge of the pre-deformation situation. Using apatite fission track thermochronology, cosmogenic 10Be and morphological study on Tertiary lava flows we demonstrate that prior to the Oligocene the morphology of the East Sayan area was characterized by a wide, constantly rejuvenated erosion surface. Apatite fission track thermal modelling indicates that this surface started to form at least in Late Jurassic-Early Cretaceous (140-120 Ma). The long-term exhumation rates (several tens of million years) derived from apatite fission track data (17.5 m/Ma) and the short-term erosion rates (over a few hundred thousand years) derived from cosmogenic 10Be data (12-20 m/Ma) are coherent implying a near constant mean erosion rate since Late Jurassic. This constant, slow erosion prevented the formation of a lateritic-kaolinic weathering crust on the planation surface. By Oligocene-early Miocene times a long wavelength uplift that remains to be explained, induced incision that created shallow valleys later filled by basaltic lava flows. Finally, the present short-wavelength topography initiated during the Pliocene.
ISSN: 0743-9547

insu-00805603
https://hal-insu.archives-ouvertes.fr/insu-00805603
DOI : 10.1016/j.jseaes.2011.09.017

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : TECTO LITHO
On the basis of a section across the northwestern Alpine wedge and foreland basin, analogue modeling is used to investigate the impact of surface processes on the orogenic evolution. The basis model takes into account both structural and lithological heritages of the wedge. During shortening, erosion and sedimentation are performed to maintain a critical wedge. Frontal accretion leads to the development of a foreland thrust belt; underplating leads to the formation of an antiformal nappe stack in the internal zones. Important volumes of analogue materials are eroded out of the geological record, which in the case of the Alps suggests that the original lengths and volumes may be underestimated. The foreland basin evolves differently depending on the amounts of erosion/sedimentation. Its evolution and internal structuring is governed by the wedge mechanics, thought to be the main controlling mechanism in the development of the Molasse basin in a feedback interaction with surface processes.
ISSN: 0278-7407

hal-00404424
https://hal.archives-ouvertes.fr/hal-00404424
DOI : 10.1029/2006TC002048

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Assessing seismic hazards remains one of the most challenging scientific issues in Earthsciences. Deep tectonic processes are classically considered as the only persistentmechanism driving the stress loading of active faults over a seismic cycle. Here we show via amechanical model that erosion also significantly influences the stress loading of thrust faultsat the timescale of a seismic cycle. Indeed, erosion rates of about B0.1–20mmyr1, asdocumented in Taiwan and in other active compressional orogens, can raise the Coulombstress by B0.1–10 bar on the nearby thrust faults over the inter-seismic phase. Masstransfers induced by surface processes in general, during continuous or short-lived andintense events, represent a prominent mechanism for inter-seismic stress loading offaults near the surface. Such stresses are probably sufficient to trigger shallow seismicity orpromote the rupture of deep continental earthquakes up to the surface.
ISSN: 2041-1723

insu-01087103
https://hal-insu.archives-ouvertes.fr/insu-01087103
https://hal-insu.archives-ouvertes.fr/insu-01087103/document
https://hal-insu.archives-ouvertes.fr/insu-01087103/file/Steer2014_NatureComm_accepted.pdf
DOI : 10.1038/ncomms6564

Éditeur(s) : HAL CCSD Blackwell Publishing
Résumé : International audience
Pliocene and Pleistocene deposits from Grande-Terre (Guadeloupe archipelago, French Lesser Antilles) provide a remarkable example of an isolated carbonate system built in an active margin setting, with sedimentation both controlled by rapid sea-level changes and tectonic movements. Based on new field, sedimentological and palaeontological analyses, these deposits have been organized into four sedimentary sequences (S1 to S4) separated by three subaerial erosion surfaces (SB0, SB1 and SB2). Sequences S1 and S2 ('Calcaires inférieurs à rhodolithes') deposited during the late Zanclean to early Gelasian (planktonic foraminiferal Zones PL2 to PL5) in low subsidence conditions, on a distally steepened ramp dipping eastward. Red algal-rich deposits, which dominate the western part of Grande-Terre, change to planktonic foraminifer-rich deposits eastward. Vertical movements of tens of metres were responsible for the formation of SB0 and SB1. Sequence S3 ('Formation volcano-sédimentaire', 'Calcaires supérieurs à rhodolithes' and 'Calcaires à Agaricia') was deposited during the late Piacenzian to early Calabrian (Zones PL5 to PT1a) on a distally steepened, red algal-dominated ramp that changes upward into a homoclinal, coral-dominated ramp. Deposition of Sequence S3 occurred during a eustatic cycle in quiet tectonic conditions. Its uppermost boundary, the major erosion surface SB2, is related to the Cala1 eustatic sea-level fall. Finally, Sequence S4 ('Calcaires à Acropora') probably formed during the Calabrian, developing as a coral-dominated platform during a eustatic cycle in quiet tectonic conditions. The final emergence of the island could then have occurred in late Calabrian times.
ISSN: 1469-3496

hal-00760906
https://hal.archives-ouvertes.fr/hal-00760906
DOI : 10.1111/j.1365-3091.2011.01311.x

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Coupling between erosion and tectonics is thought to play a determinant role in orogenic evolution. Here, we investigate the interplay in this coupling between the assumed erosion law and the crustal rheology at the margin of a collisional plateau, like the Himalaya of Central Nepal. Lithospheric deformation is calculated over a time scale of 100 kyr by a 2D finite element model that incorporates the rheological layering of the crust and the main features of the convergence across the range. For the upper boundary condition, two surface processes were tested: a linear diffusion model and a 1D1/2 integrative model including fluvial incision along the fluvial network and hillslope erosion by landsliding. Model results and their sensitivity to the chosen combinations of erosion law and crustal properties are discussed in light of the constraining geologic and geomorphologic observations. In contrast with the conclusions of Cattin and Avouac [2000] , where a compliant quartz-rich crustal rheology and diffusion law were required, we combine a composite quartz-diabase rheology for the crust with fluvial incision erosion law to account for erosion and elevation profiles across the Himalaya of Central Nepal. More generally, it is proposed that, because of the interplay between the dominant denudation conditions and the rheology of the crust, both well documented erosion rates and processes can provide significant constraints on crustal properties within an active orogen.
ISSN: 0094-8276

hal-00788697
https://hal.archives-ouvertes.fr/hal-00788697
https://hal.archives-ouvertes.fr/hal-00788697/document
https://hal.archives-ouvertes.fr/hal-00788697/file/godard_et_al.pdf
DOI : 10.1029/2004GL021006

Éditeur(s) : HAL CCSD Geological Society
Résumé : International audience
Deformation mechanisms, long-term kinematics and evolution of fold and thrust belts subjected to erosion are studied through 2D analogue experiments involving large convergence. First-order parameters tested include (1) décollements and/or plastic layers interbedded at different locations within analogue materials and (2) synconvergence surface erosion. Weak layers, depending on their location in the model, favour deformation partitioning characterized by the simultaneous development of underplating domains in the inner part of the wedge (basal accretion) and frontal accretion where the wedge grows forward. Interaction between tectonics and surface processes influences this behaviour. Development of antiformal thrust stacks controlled by underplating shows small- and large-scale cyclicity. Thin plastic layers induce folding processes, which are studied at wedge scale. Recumbent and overturned folds, with large inverted limbs, develop in a shear-induced asymmetric deformation regime via progressive unrolling of synclinal hinges. Surface erosion and underplating at depth induce further rotation (passive tilting) and horizontalization of fold limbs. Model results give insights to discuss the mechanisms responsible for the large-scale structures (i.e. antiformal nappe stacks, klippen and kilometre-scale recumbent fold-nappes) encountered in several mountain belts such as the Montagne Noire (French Massif Central), the Galicia Variscan belt (Spain) and the northern Apennines (Italy).
ISSN: 0016-7649

hal-00937644
https://hal.archives-ouvertes.fr/hal-00937644
DOI : 10.1144/jgs2013-012

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
S U M M A R Y Over the last decade, thermomechanical models have revealed the control of both tectonics and erosion on the morphology of continental plateaus margins. However, unravelling the specific effects of these two coupled processes has been difficult in practice. Here, to assess the control of erosion, we investigate the dynamics of the eastern and the northern borders of the Tibetan Plateau, which are characterized by a low convergence rate and a steep topographic escarpment adjacent to the Sichuan and Tarim basins, respectively. Thermomechanical modelling of continental lithosphere coupled with fluvial denudation reveals that important crustal deformation with large-scale horizontal displacements can occur, without any convergence, as a response to mass transfer due to gravitational collapse and to erosional unloading. These processes are sensitive to crustal structure, geothermal gradient as well as surface erosion. At a timescale of several million years, our results suggest that this denudation-triggered deformation exerts a primary control on the evolution of those plateau margins by counterbalancing the mass removal due to erosion and stabilizing the topographic escarpment. This finding supports a possible explanation for the morphology of the Longmen Shan, eastern Tibet, in which the paradoxical combination of persistent high-topographic gradients close to the foreland and low convergence rates can be related to the influence of erosion on deformation patterns.
ISSN: 0956-540X

hal-01577060
https://hal-amu.archives-ouvertes.fr/hal-01577060
https://hal-amu.archives-ouvertes.fr/hal-01577060/document
https://hal-amu.archives-ouvertes.fr/hal-01577060/file/godard2009erosional.pdf
DOI : 10.1111/j.1365-246X.2009.04324.x

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Karukéra spur is an easternmost submerged rise of the Lesser Antilles fore-arc in the Guadeloupe archipelago, culminating about 4000 m above the fore-arc basin 150 km west of the deformation front. The analysis of 3500 km 2D high-resolution multichannel seismic reflection and multibeam bathymetric data, and the study of 14 core samples, allow for the first time to reconstruct its sedimentary anatomy and tectonic evolution. Seven seismic units (US1 to US7) are evidenced, organised into four major depositional sequences separated by erosional surfaces. Units US1 to US4 thicken to the south-southeast on the spur. The sedimentary deposits rest upon a deeply eroded metamorphic basement of the Caribbean Plate as in La Désirade Island. Sequence 1 (units US1 and US2) remains unknown in its lower part because it does not outcrop. Its upper part comprises early Miocene shallow water carbonates. Sequence S2 (Unit US3) only comprises an upper Miocene transgressive systems tract deposited into basinal environment. It is bounded by major erosional surfaces SB2 and SB3. Sequence 3 (US4 to US6) is Zanclean to Pleistocene. It is dominantly composed of shallow water, reefal deposits. Sequence 4 corresponds to recent deposits. The Karukéra spur experienced three main extensional episodes with alternations between uplift and subsidence periods. Uplifts are responsible for emersions and erosions. Subsidence severely drowned shallow water deposits. The first extensional episode led to the formation of horsts and grabens in the basement, prior to early Miocene deposits. The second extensional episode occurred during upper Miocene, in accordance with data in surrounding islands. The third tectonic episode developed since Calabrian. Noticeable is the constant reactivation of N130°–N150°, N150°–N180° and N40° trending faults since early Miocene and the neoformation of E–W trending faults since Calabrian. Our results suggest that at the latitude of Guadeloupean archipelago the Lesser Antilles subduction zone is an erosional margin because of the successive sweepings of the Santa Lucia then Tiburon Ridges.
ISSN: 0025-3227

hal-01172231
https://hal.archives-ouvertes.fr/hal-01172231
DOI : 10.1016/j.margeo.2015.02.007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : In Gobi Altay and Altay, Mongolia, several flat surfaces, worn through basement rocks and uplifted during the ongoing tectonic episode to a similar altitude of 4000 m, suggests disruption of a single large-scale surface. New thermochronology and field data show that the plateau surfaces represent uplifted parts of an ancient peneplain that formed during Jurassic time. The Gobi Altay and Altay flattopped massifs are tectonically and geomorphologically unique. Their preservation for ~150 m.y. implies that no further tectonic movements occurred before the onset of the last deformation episode, 5 ± 3 m.y. ago. It also suggests that very low erosion rates were maintained by a dry climate over millions of years.
ISSN: 0091-7613

hal-00406436
https://hal.archives-ouvertes.fr/hal-00406436
DOI : 10.1130/G23758A.1

Résumé : L’arc des Petites Antilles résulte de la lente subduction vers l'Ouest des plaques Nord et Sud-Américaines sous la plaque Caraïbes (2cm/an). A la latitude de l’archipel guadeloupéen et à ~150 km à l’Ouest du front de déformation, le bassin d'avant-arc de Marie-Galante forme un bassin perché, incliné vers la fosse et limité vers l’Est par un haut-fond, l’Eperon Karukéra. À cette latitude, le bassin de Marie-Galante domine le prisme d’accrétion de la Barbade et fait face à la ride de Tiburon qui balaye la zone du Nord au Sud depuis la fin du Miocène supérieur. Le remplissage sédimentaire du Bassin de Marie-Galante montre des déformations actives au moins depuis ~30 millions d’années. L’objectif du travail est de reconstituer l’évolution tectono-sédimentaire de ce bassin pour apporter de nouvelles contraintes sur la compréhension globale de la zone de subduction frontale des Petites Antilles. Ce travail s'appuie sur les données de bathymétrie multifaisceaux et de sismique réflexion multi-traces haute résolution acquises lors des campagnes du programme KaShallow. Cette base de données, complétée de profils sismiques plus basse résolution de campagnes antérieures, permet d’avoir une couverture pseudo 3D et à quatre échelles de résolution de l'ensemble du bassin. Un échantillonnage par ROV et carottage ciblé a fourni 40 prélèvements dans les principales unités sismiques. Les analyses pétrologiques et les datations biostratigraphiques autorisent des reconstitutions paléo-environnementales depuis le Paléogène supérieur jusqu’à Actuel. L’interprétation sismique multi-échelle montre un bassin sédimentaire atteignant ~4,5s temps double (~4500 à 5625 m) sur un substratum magmatique pré-structuré. Ce bassin est composé de 5 grands ensembles sédimentaires (E-1, E1, E2, E3 et E4) subdivisés en 13 unités limitées par 14 surfaces de discontinuités. L’organisation séquentielle des unités sismiques permet de mettre en évidence 10 séquences de dépôts de troisièmes ordres (S-1 à S9). Le calage biostratigraphique de l’ensemble des séquences permet de proposer une évolution tectono-sédimentaire du bassin de l’Éocène à l’Actuel. Ainsi, nous distinguons quatre systèmes de failles normales associées à trois phases d’extensions qui contrôlent l’évolution architecturale et sédimentaire du bassin. 1/ Un système N050±10°E hérité, actif dès le Paléogène supérieur, qui contrôle le basculement général du bassin vers le SSE. Il est responsable de la formation de l'escarpement de Désirade d’environ 4500 m de dénivelé. Cette première extension est interprétée comme résultant de la fragmentation de l'avant-arc en réponse à l'augmentation du rayon de courbure de la zone de subduction. 2/ Un système N130°-N150°E, structurant à l’échelle de l’Éperon Karukéra, qui contrôle la sédimentation dès le Miocène inférieur et marque une première phase d'extension transverse à l’arc. 3/ Un système N160°-N180°E qui segmente le Bassin de Marie-Galante en un sous-bassin à l'Ouest et l'Éperon Karukéra à l'Est. Cette seconde extension, globalement perpendiculaire à la marge, s'accompagne d’une subsidence et d'une inversion de la polarité du bassin en réponse à son basculement vers la fosse qui débute au cours du Miocène moyen et se poursuit actuellement à l'Est du bassin. Cette évolution à long terme de l'avant-arc, concomitante avec le recul de l'arc volcanique vers l’Ouest, est considérée comme résultant d’une érosion basale de la plaque supérieure. 4/ Un système N090±10°E plus tardif est localisé au centre du bassin et qui contrôle le développement de plates-formes carbonatées néritiques sur certaines têtes de blocs, comme par exemple à Marie-Galante. Cette dernière extension, parallèle à l’arc, se manifeste dans le bassin à partir du Pliocène inférieur. Elle se superpose au régime d'extension perpendiculaire à l'avant-arc et est interprétée comme l'accommodation du partitionnement de la déformation en réponse à l’obliquité croissante du front subduction vers le Nord.
The Lesser Antilles result of the slow westward subduction of the North and South American plate under the Caribbean plate (2 cm / year). At the latitude of the Guadeloupe archipelago and ~ 150 km to the west of the deformation front, the fore-arc basin of Marie-Galante forms a perched basin tilted to the pit and limited to the East by a shoal, the Spur Karukéra. At this latitude, Marie-Galante basin dominates the accretionary prism of Barbados and faces wrinkle Tiburon sweeping the area from North to South from the late Miocene. The sedimentary fill Basin Marie-Galante shows active deformation since at least ~ 30 million years. The aim of the work is to reconstruct the tectono-sedimentary evolution of the basin to provide new constraints on the overall understanding of the frontal subduction zone Lesser Antilles. This work relies on multibeam bathymetry data and high-resolution seismic reflection multi-traces acquired during campaigns KaShallow program. This database, supplemented by lower resolution of previous campaigns seismic profiles, provides a pseudo-3D coverage and four scales of resolution of the entire basin. ROV sampling and targeted core provided 40 samples in the main seismic units. Petrological analysis and biostratigraphic dating allow paleoenvironmental reconstructions from the upper Paleogene up Actuel. Seismic interpretation multiscale shows a sedimentary basin reaching ~ 4,5s double (~ 4500-5625 m) on a substrate pre-structured magma. This basin consists of 5 main sedimentary units (E-1, E1, E2, E3 and E4) divided into 13 units bounded by discontinuities 14 surfaces. The sequential organization of seismic units allows to highlight sequences 10 deposits of third order (S-1 to S9). The biostratigraphic calibration of all sequences able to offer a tectono-sedimentary evolution of the Eocene basin to Present. Thus, we distinguish four normal fault systems associated with three phases of extensions that control the architectural and sedimentary evolution of the basin. 1 / A system N050 ± 10 ° E inherited assets from the upper Paleogene, which controls the overall pelvic tilt towards the SSE. He is responsible for the formation of the escarpment Désirade about 4500 m elevation. The first extension is interpreted as resulting from the fragmentation of the fore-arc in response to the increase in the radius of curvature of subduction. 2 / A system N130 ° -N150 ° E, structuring across the Spur Karukéra, which controls sediment from the Miocene and marks the first phase of transverse extension arc. 3 / A system N160 ° E ° -N180 which segments Basin Marie-Galante in a sub-basin to the west and the Spur Karukéra in the East. This second extension, generally perpendicular to the margin, is accompanied by subsidence and reversing the polarity of the basin in response to his switch to the pit, beginning during the Middle Miocene and is ongoing in the East the basin. This long-term evolution of the forearc, concurrent with the decline in volcanic arc to the west, is considered as resulting from a basal erosion of the top plate. 4 / A system N090 ± 10 ° later E is located in the center of the basin and controlling the development of neritic carbonate platforms on certain blocks heads, such as Marie-Galante. This latest extension, parallel to the arc occurs in the basin from the lower Pliocene. It is superimposed on the expansion plan perpendicular to the fore-arc and is interpreted as the accommodation of the partitioning of deformation in response to the increasing obliquity front subduction north.

http://www.theses.fr/2014AGUY0799/document

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
In places where sedimentation and erosion compete at fast rates, part of the record of past earthquakes on faults may be buried, hence hidden, in the first few metres below the surface. We developed a novel form of palaeoseismology, of geophysical type, based on the use of a dense pseudo-3-D Ground Penetrating Radar (GPR) survey to investigate such possible buried earthquake traces, on a long, fast-slipping strike-slip fault (Hope fault, New Zealand), at a site (Terako) where marked alluvial conditions prevail. We first used LiDAR data to analyse the ground surface morphology of the 2 km2 site at the greatest resolution. Nineteen morphological markers were observed, mainly alluvial terrace risers and small stream channels that are all dextrally offset by the fault by amounts ranging between 3 and 200 m. The measurements document about 10 past earthquake slip events with a mean coseismic slip of 3.3 +/- 1 m, with the most recent earthquake event having a slip of 3 +/- 0.5 m. We then investigated a detailed area of the site (400 x 600 m2) with pseudo-3-D GPR. We measured 56, similar to 400 m long, 510 m spaced GPR profiles (250 MHz), parallel to the fault and evenly distributed on either side. The analysis revealed the existence of a palaeosurface buried at about 3 m depth, corresponding to the top of alluvial terraces of different ages. That buried surface is incised by a dense network of stream channels that are all dextrally offset by the fault. We measured 48 lateral offsets in the buried channel network, more than twice than at the surface. These offsets range between 6 and 108 m, as observed at the surface, yet provide a more continuous record of the fault slip. The similarity of the successive slip increments suggests a slip per event averaging 4.4 +/- 1 m, fairly similar to that estimated from surface data. From the total surface and buried 67 offset collection, we infer that a minimum of 30 large earthquakes have broken the Hope fault at the Terako site in the last about 67 kyr, with an average coseismic slip of 3.2 +/- 1 m, a minimum average recurrence time of about 200 yr, and a magnitude of at least Mw 7.07.4. Our study therefore confirms that part of the record of past earthquakes may indeed reside in the first few metres below the surface, where it may be explored with geophysical, GPR-based palaeoseismology. Developing such a new palaeoseismological tool should provide rich information that may complement surface observations and help to document the past earthquakes on faults.
ISSN: 0956-540X

hal-00704560
https://hal.archives-ouvertes.fr/hal-00704560
DOI : 10.1111/j.1365-246X.2012.05366.x

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The structure and dynamic evolution of a mountain belt piedmont are controlled by strong interactions between tectonics, surface processes (erosion, sedimentation), and climate. Studying these couplings relies on detailed geometric and kinematic analysis of morphostructural markers (folds, faults, terraces, alluvial surfaces) and analysis of syntectonic sedimentation. To study quantitatively how these markers form, evolve and record deformation, we developed a new analogue modelling approach using a specific composite granular material. The originality stands in the simultaneous modelling of orogenic deformation mechanisms and erosion-transport-sedimentation processes, but also in the use of techniques allowing quantitative measurement of morphostructural evolution. This methodology opens new perspectives in the fields of geomorphology (relief dynamics), seismotectonics (study of active faults), and sedimentology (including sequential stratigraphy).
ISSN: 0010-7999

hal-00411972
https://hal.archives-ouvertes.fr/hal-00411972
DOI : 10.1016/j.crte.2008.01.005

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : La dégradation de l’arganeraie fait toujours l’objet d’un débat acharné et éclairé d’un intérêt considérable de la part du public, de la presse et des milieux universitaires. Plusieurs études ont été faites pour trouver des explications et des solutions à ce phénomène. La majorité des résultats de ces travaux avancent les conséquences négatives de l’élevage caprin sur l’écosystème arganeraie dont la réduction de la surface est importante et a tendance à s’accélérer sans être compensée spontanément parce que la régénération naturelle de l’arganier ne s’effectue plus, et ceci en raison de plusieurs facteurs : urbanisation, sécheresses, cultures intensives et extensives sous les arbres en plaine et sur les plateaux (en irrigué et en bour), et surtout, selon ces études, le surpâturage par les éleveurs de chèvres. Dans cette étude, nous n’allons pas jauger le bien-fondé de ces résultats. Cependant, l’argument et l’hypothèse que nous choisissons sont que la conjugaison du surpâturage avec d’autres facteurs parmi lesquels, essentiellement, le succès récent de l’huile d’argane à l’étranger, va bousculer les savoirs écologiques liés au troupeau et à sa conduite dans l’arganeraie. Cela entraîner leur forte érosion et contribue à déstabiliser l’équilibre séculaire de ce système agraire articulé autour de trois productions : l’arganier (argane), la culture d’orge (tomzine) et l’élevage de petits ruminants, surtout la chèvre (taghate).
The degradation of the arganeraie is always the object of a debate relentless and lit by a considerable interest on behalf of the public, of the press and by the university circles. Several studies have been made to find explanations and solutions to this phenomenon. The majority of the results of this work suggest the negative consequences of goat farming on the argan ecosystem including the reduction of the surface is important and tends to accelerate and is no longer compensated spontaneously because the natural regeneration of argan no longer takes place and this because of several factors: urbanization; droughts; intensive and extensive crops under trees in the plains and plateaus (irrigated and rainfed), and most importantly, according to these studies, overgrazing by goat herders. In this study, we will not assess the validity of these results. However, our argument and the assumption that we choose is that the combination of overgrazing with other factors among which retain essentially the recent success of argan oil abroad will upset the ecological knowledge related to herd and conduct in the argan tree and cause them severe erosion, destabilizing secular equilibrium of the agrarian system that revolves around three productions: argan (argan), the barley crop (tomzine) and breeding small ruminants especially goats (taghate).
Maroc

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.10342
http://journals.openedition.org/etudescaribeennes/10342

Éditeur(s) : Elsevier Science Bv
Résumé : The modern Rhone delta in the Gulf of Lions (NW Mediterranean) is a typical wave-dominated delta that developed after the stabilization of relative sea level following the last deglacial sea-level rise. Similar to most other deltas worldwide, it displays several stacked parasequences and lobes that reflect the complex interaction between accommodation, sediment supply and autogenic processes on the architecture of a wave-dominated delta. The interpretation of a large set of newly acquired very high-resolution seismic and sedimentological data, well constrained by 14C dates, provides a refined three-dimensional image of the detailed architecture (seismic bounding surfaces, sedimentary facies) of the Rhone subaqueous delta, and allows us to propose a scenario for delta evolution during the last deglaciation and Holocene. The subaqueous delta consists of “parasequence-like” depositional wedges, a few meters to 20–30 m in thickness. These wedges first back-stepped inland toward the NW in response to combined global sea-level rise and overall westward oceanic circulation, at a time when sediment supply could not keep pace with rapid absolute (eustatic) sea-level rise. At the the Younger Dryas-Preboreal transition, more rapid sea-level rise led to the formation of a major flooding surface (equivalent to a wave ravinement surface). After stabilization of global sea level in the mid-Holocene, accommodation became the leading factor controlling delta architecture. An eastward shift of depocenters occurred, probably favoured by higher subsidence rate within the thick Messinian Rhone valley fill. The transition between transgressive (backstepping geometry) and regressive (prograding geometry) (para)sequences resulted in creation of a Maximum Flooding Surface (MFS) that differs from a “classical” MFS described in the literature. It consists of a coarse-grained interval incorporating reworked shoreface material within a silty clay matrix. This distinct lithofacies results from condensation/erosion, which appears as an important process even within supply-dominated deltaic systems, due to avulsion of distributaries. The age of the MFS varies along-strike between ca. 7.8-5.6 kyr cal. BP in relation to the position of depocenters and climatically-controlled sediment supply. The last rapid climate change of the Holocene, the Little Ice Age (1250–1850 AD), had a distinct stratigraphic influence on the architecture and lithofacies of the Rhone subaqueous delta through the progradation of two deltaic lobes. In response to changes in sediment supply linked to rapid climate changes (and to anthropic factors), the Rhone delta evolved from wave-dominated to fluvial dominated, and then wave dominated again.
Sedimentary Geology (0037-0738) (Elsevier Science Bv), 2014-05 , Vol. 305 , P. 35-53

Droits : 2014 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00179/29017/27445.pdf
DOI:10.1016/j.sedgeo.2014.02.004
http://archimer.ifremer.fr/doc/00179/29017/

Éditeur(s) : Elsevier
Résumé : Beach sediment cementation (beachrock formation) is a sedimentary process that can transform significant sections of beaches into rock outcrops. This contribution reports the results of two questionnaire surveys (one focusing on foreign tourists and the other on local people) carried out in coastal resorts of the island of Lesbos (Greece), on the perceptions of beach users regarding the impacts of beachrocks on their recreational activities. The survey focusing on foreign tourists showed that the majority of the interviewees took notice of the formations and commented negatively on them. Although most of the interviewees did not consider beachrocks a significant safety risk, a considerable proportion of the sample stated that beachrocks influenced their beach ratings that they would prefer beachrock-free beaches and would be willing to contribute financially to preventative and protective measures. In contrast, the results of the survey focusing on local people, who are more familiar with the phenomenon, showed a high perception of beachrock-related risks and limited beachrock tolerance. In addition to the safety risks that the irregular, slippery, beachrock surfaces may pose to beach users, beachrocks may also degrade beach aesthetics. promote beach sediment erosion and decrease the beach carrying capacity. As beachrocks are a common attribute of tropical, subtropical and low-temperate beaches that are typically associated with major tourist destinations, and are likely to spread under global warming conditions, they may be considered as a significant threat to the coastal tourist industry. (c) 2008 Elsevier Ltd. All rights reserved.
Tourism Management (0261-5177) (Elsevier), 2009-08 , Vol. 30 , N. 4 , P. 544-552

Droits : 2009 Elsevier Ltd All rights reserved.
http://archimer.ifremer.fr/doc/2009/publication-6625.pdf
DOI:10.1016/j.tourman.2008.09.007
http://archimer.ifremer.fr/doc/00000/6625/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The dating of the uplift onset of the Mongolian mountain ranges, the northernmost relief associated with the India-Eurasia convergence, is a fundamental issue to better understand the mechanisms of propagation of the Cenozoic transpressive deformation in Central Asia. Using apatite fission tracks we determined the timing and strain rates of the tectonics affecting the Gurvan Bogd system, in the Gobi-Altay, since the Middle Mesozoic to the Late Cenozoic. The region was firstly affected by a Lower-Middle Jurassic tectonic phase, characterized by a vertical crustal movement larger than 2 km. Then followed a protracted period without major crustal vertical movements until the last uplift phase. The peneplanation of the Jurassic relief produced an erosional surface that has undergone negligible denudation or sedimentation for more than 100 Ma. This same surface corresponds to the present summit plateaux of the massifs, standing about 2000 m above the surrounding region, which corresponds to the vertical movement produced by the ongoing uplift. Modelling of fission track data from the massifs of Ih Bogd and Baga Bogd shows that this uplift phase probably started at 5 ± 3 Ma. The Gobi-Altay mountain range appears therefore as one of the youngest mountain ranges in Central Asia, which is consistent with the idea of a northward propagation of the transpressional deformation from the Himalayan front to the Siberian craton. The Cenozoic uplift rate of the massifs is estimated to be between 0.25 and 1 mm/yr, which is slightly higher than the upper Pleistocene vertical slip rates of the bordering faults. This suggests that thrust faults observed within the massifs would increase the uplift rate inside the massifs compared to the uplift rate determined at their boundaries.
ISSN: 0012-821X

insu-00191116
https://hal-insu.archives-ouvertes.fr/insu-00191116
DOI : 10.1016/j.epsl.2007.04.047

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Based on observations from both modem convergent margins and sandbox modeling, we examine the possible conditions favoring frontal accretion and/or frontal and basal tectonic erosion. Mean characteristic parameters (!.t, !.t* • and [) are used to discuss the mechanical stability of 28 transects across the frontal part of convergent margins where the Coulomb theory is applicable. Natural observations reveal that "typical accretionary wedges" are characterized by low tapers with smooth surface slope and subducting plate, low convergence rates and thick trench sediment, while "nonaccretionary wedges" display large tapers with irregular surface slopes and rough subducting plate, high convergence rates and almost no trench fill. Sandbox experiments were performed to illustrate the effects of seamounts/ridges in the subduction zone on the deformation of an accretionary wedge. These experiments show that a wedge of sand is first trapped and pushed in front of the seamount which acts as a moving bulldozer. This is followed by a tunnelling effect of the subducting seamount through the frontal wedge material, which results in considerable sand reworking. At an advanced subduction stage, the d6collement jumps back from a high level in the wedge to its former basal position. We conclude that a high trench sedimentation rate relative to the convergence rate leads to frontal accretion. In contrast, several conditions may favor tectonic erosion of the upper plate. First, oceanic features, such as grabens, seamounts or ridges, may trap upper plate material during their subduction process. Second, destabilization of the upper plate material by internal fluid overpressuring causing hydrofracturing is probably another important mechanism.
ISSN: 0148-0227

hal-01261600
https://hal.archives-ouvertes.fr/hal-01261600
https://hal.archives-ouvertes.fr/hal-01261600/document
https://hal.archives-ouvertes.fr/hal-01261600/file/lallemandJGR1994.pdf