Éditeur(s) : HAL CCSD Society of Exploration Geophysicists
Résumé : Read More: http://library.seg.org/doi/10.1190/geo2015-0411.1
International audience
Understanding the role of the unsaturated zone in aquifer recharge and contaminant attenuation processes is a major challenge for the protection and management of karstic water resources. We present the potential of the magnetic resonance soundings (MRS) geophysical method for characterizing the vadose zone of karst aquifers composed of epikarst and infiltration layers. To investigate the hydraulic functioning of the Durzon karst system located on the Larzac plateau (southern France), we used the MRS method at 16 sites. The MRS results have been compared with available geologic information and to core water content measurements. The remarkable spatial variability of the MRS response observed in the study area makes it possible to determine ranges of water storage properties in relation to the lithology of the investigated carbonate formations (dolomite, marly, and siliceous limestone). All soundings found either constant or increasing MRS water content with depth, which demonstrates that the infiltration zone might be the major water storage entity for permanent water storage, with important consequences for recharge quality and quantity. These results show the feasibility and potential of the MRS method for the characterization of the karst unsaturated zone and for understanding the vertical distribution of water content, which impacts the overall functioning of karst systems.Read More: http://library.seg.org/doi/10.1190/geo2015-0411.1
ISSN: 0016-8033

hal-01412654
https://hal.archives-ouvertes.fr/hal-01412654
https://hal.archives-ouvertes.fr/hal-01412654/document
https://hal.archives-ouvertes.fr/hal-01412654/file/mazilli2016.pdf
DOI : 10.1190/GEO2015-0411.1

Éditeur(s) : HAL CCSD Springer Verlag
Résumé :  
Growth strains were measured in situ in nine trees of three species from a French Guiana tropical rainforest in a clearly active verticality restoration process. The aim was to detect tension wood within the samples. Wood specimens were cut in the vicinity of the growth strain measurements in order to determine the microfibril angle and some mechanical and physical properties. As suspected, tensile growth strain was much higher in tension wood zones, as shown by the slightly higher longitudinal modulus of elasticity. Conversely, tension wood showed reduced compression strength. Longitudinal shrinkage was much higher in tension wood than in opposite wood. Clear relationships between the microfibril angle and longitudinal properties were noted in comparison (i) with those observed in gymnosperm compression wood and (ii) with expected relationships from the organization of wood fibres cell wall structure.
ISSN: 0043-7719

hal-01032114
https://hal.archives-ouvertes.fr/hal-01032114
DOI : 10.1007/s00226-010-0323-9

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present comparative field studies in folded areas (Southern France. Moroccan Western Atlas and Abruzzo, Italy) giving new insights into fracture distribution within folded rocks of the shallow brittle crust. We show that the curvature in folds formed in brittle mechanical units is usually accommodated by multiple "dip-domain boundaries" (appearing as curvature discontinuities at fold scale) corresponding to relatively narrow and dense fracture zones, striking parallel or slightly oblique to the fold axis. They separate "dip-domains" where curvature is absent or moderate. It is shown that the dip-domain boundaries (which are obvious in the case of kink folds or box-fold anticlines) are currently present as multiple subtle hinges even when the curvature appears continuous at first sight. The nature of dip-domain boundaries is studied, they often cut through the whole thickness of the mechanical units Their internal structure varies, and a non-exhaustive typology is proposed For each type, an interpretative kinematic scenario shows how the dip-domain boundaries could initiate and develop. We suggest two kinds of origins (1) they could correspond to the reactivation of inherited, along-strike fracture zones (opening-mode fracture concentrations such as big joints, fracture corridors. Inherited faults, etc), (2) they could be created as mechanical instabilities during the fold formation (syn-folding origin), in particular through small reverse faults. In both cases, early zones of weakness localize the dip-domain boundaries, and control the Increase in curvature in association with increasing fracture density within the boundary. Because they represent well-defined vertically and axially persistent sub-seismic fracture zones generally limited to the thickness of the folded unit, dip-domain boundaries could enhance the axial permeability of folded and fractured reservoirs.
ISSN: 0191-8141

hal-00512651
https://hal.archives-ouvertes.fr/hal-00512651
DOI : 10.1016/j.jsg.2010.03.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Several studies, both theoretical and experimental, show that sedimentary rocks have fractal pore-grain interface. The real rocks are 3-d structures with highly tortuous and often fractal pore spaces. Before attempting simulation of this daunting geometry, we present here, as a preliminary study, a simpler 2-d version. In this paper, a computer simulated 2-d sedimentary rock structure is generated by the relaxed bidisperse ballistic deposition model. Grains of two different sizes are dropped ballistically on a linear substrate. By changing the fraction of the two types of particles, the porosity of the rock structure can be tuned. The structure undergoes compaction through the relaxation of possible unstable overhangs. The micro structure of the pore space is investigated. The pore mass and the rock-pore interface show a fractal behaviour with the same fractal dimension indicating that the pore volume is a fractal. Our simulation results indicate that the process of compaction of grains during the deposition process seems to erase the dependency of the fractal dimension on the grain size distribution. The two point density correlation is measured for the pore space. It shows anisotropy which is an outcome of the growth rule. X-ray tomography of two-dimensional sections of real sedimentary rocks obtained from Mallorca Island is subjected to the same study and the results compared with those obtained from simulation. The simulation results agree qualitatively with the real rock sample. We also study diffusion on the pore space. Diffusion is found to be anomalous as is expected in fractal spaces. It also bears the signature of anisotropy of the structure. Diffusion studies on the real rock sample could not yield conclusive results as the system size is not large enough.
ISSN: 0926-9851

hal-00761818
https://hal.archives-ouvertes.fr/hal-00761818
DOI : 10.1016/j.jappgeo.2012.09.002

Éditeur(s) : Pergamon-elsevier Science Ltd
Résumé : Bivalve larvae and hydrographic parameters were sampled over a range of spatio-temporal scales in a deep atoll lagoon. Bivalve larvae abundances were very high throughout the year: 18,550 m(-3) in average. Larvae were (i) concentrated at mid-depth with nocturnal ascent and diurnal descent, (ii) heterogeneously dispersed at the lagoon scale, (iii) subject to day-to-day variation in abundance and (iv) transferred between different parts of the lagoon providing evidence of intra-lagoonal connectivity. The primacy of physical factors was seen on large spatial scale with the diluting effect of water renewal and transfers by hydrodynamics. On smaller spatial scale, the primacy of biological processes was recognised, with larval swimming activity leading to dial vertical migration correlated with food concentration. Variations in larval abundance were driven by bivalve reproductive activity correlated with meteorological conditions (i.e. windy periods). Finally, relationship between bivalve larvae patterns and pearl oyster (Pinctada margaritifera) settlement structuring is discussed. (C) 2012 Elsevier Ltd. All rights reserved.
Marine Pollution Bulletin (0025-326X) (Pergamon-elsevier Science Ltd), 2012 , Vol. 65 , N. 10-12 , P. 453-462

Droits : 2012 Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00101/21200/20690.pdf
DOI:10.1016/j.marpolbul.2011.12.028
http://archimer.ifremer.fr/doc/00101/21200/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The western margin of the Gulf of Mexico (Veracruz State, Mexico) displays an extensive Neogene gravitational system, whereby the Neogene siliciclastic sediments are detached from underlying Mesozoic carbonates along decollement surface in Oligocene underpressured clays. Rapidly subsiding half-grabens develop above the footwall associated with major listric faults, whereas mini-basins develop in the deepest parts of the slope, in conjunction with the growth of west-verging compressional features. Between the high-angle normal faults in the west and the thrust anticlines in the east, a wide roll-over structure has grown progressively, resulting in a major topographic break in the morphology of the slope profile. Coupled forward kinematic modelling (Thrustpack) and stratigraphic modelling (Dionisos), calibrated against seismic profiles and two key nearshore wells, have been applied to representative regional transects across the margin, in order to quantify the vertical (subsidence) and horizontal (gravitational) deformations, and to discuss the impact of various key parameters on the distribution of debris flow depositions. These simulations are compared with data from distant ODP wells and discussed in the scope of current exploration strategies in both the US and Mexican portions of the Gulf of Mexico basin.
ISSN: 0040-1951

hal-00424595
https://hal.archives-ouvertes.fr/hal-00424595
DOI : 10.1016/j.tecto.2008.06.017