Éditeur(s) : HAL CCSD National Research Council Canada
Résumé : International audience
Back-arc extension in the Aegean, which was driven by slab rollback since 45 Ma, is described here for the first time in two stages. From Middle Eocene to Middle Miocene, deformation was localized leading to i) the exhumation of high-pressure metamorphic rocks to crustal depths, ii) the exhumation of high-temperature metamorphic rocks in core complexes and iii) the deposition of sedimentary basins. Since Middle Miocene, extension distributed over the whole Aegean domain controlled the deposition of onshore and offshore Neogene sedimentary basins. We reconstructed this two-stage evolution in 3D and four steps at Aegean scale by using available ages of metamorphic and sedimentary processes, geometry and kinematics of ductile deformation, paleomagnetic data and available tomographic models. The restoration model shows that the rate of trench retreat was around 0.6 cm/y during the first 30 My and then accelerated up to 3.2 cm/y during the last 15 My. The sharp transition observed in the mode of extension, localized versus distributed, in Middle Miocene correlates with the acceleration of trench retreat and is likely a consequence of the Hellenic slab tearing documented by mantle tomography. The development of large dextral NE-SW strike-slip faults, since Middle Miocene, is illustrated by the 450 Km-long fault zone, offshore from Myrthes to Ikaria and onshore from Izmir to Balikeshir, in western Anatolia. Therefore, the interaction between the Hellenic trench retreat and the westward displacement of Anatolia started in Middle Miocene, almost 10 Ma before the propagation of the North Anatolian Fault in the North Aegean.
ISSN: 0008-4077

insu-01271296
https://hal-insu.archives-ouvertes.fr/insu-01271296
https://hal-insu.archives-ouvertes.fr/insu-01271296/document
https://hal-insu.archives-ouvertes.fr/insu-01271296/file/Brun%20etal%20CJES%202016.pdf
DOI : 10.1139/cjes-2015-0203

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The chronostratigraphy of the lower Miocene deposits of northwestern Sardinia is refined in the Castelsardo Basin. The combination of new 40Ar/39Ar isotopic datings, 19 micropalaeontological datings (calcareous nannofossils, planktonic and large benthic foraminifers) and 16 palaeomagnetic polarity measurements led to a new chronostratigraphic framework. The continental deposits of the first megasequence (Valledoria and Casteldoria members) are possibly Aquitanian. The overlying marine sediments are early Burdigalian (Vaginella depressa Molasse). The marine transgression can be dated to around 19.7 Ma. Marine conditions ceased 18.83 ± 0.13 Ma, the age of the index aerial τ2 ignimbrite. The continental part of the second megasequence (“Lacustre” unit) is early–middle Burdigalian, between 18.8 and 18 Ma. The overlying marine part (Campulandu and Sedini members) is middle–late Burdigalian. The second marine transgression began in the earliest–late Burdigalian, during the Chron C5Dr reversal, at the time of the eustatic Bur 4 event. The Castelsardo basin went through two main extensional tectonic episodes. The first one occurred as the Valledoria Member was deposited and possibly dates back to the Aquitanian. The second one occurred as the uppermost part of the Vaginella depressa Molasse was deposited during the early Burdigalian. The second extensional episode is related to a rapid rotation of Sardinia. Palaeomagnetic results confirm that Corsica and Sardinia acted as a single block which suffered a 28 ± 17° ccw rotation after 19.2 Ma. The Castelsardo basin is held to be an Aquitanian–early Burdigalian intra-arc rift basin that later evolved in a thermally controlled subsident margin of the Ligurian-Provençal Basin during the middle–late Burdigalian.
ISSN: 0031-0182

hal-00498288
https://hal.archives-ouvertes.fr/hal-00498288
DOI : 10.1016/j.palaeo.2010.06.007

Éditeur(s) : HAL CCSD
Résumé : International audience
The Aegean domain is a key area for understanding the processes of back-arc extension. Observed deformation pattern and present day kinematics result from the interaction between the southward retreat of the Hellenic trench and the westward escape of Anatolia. Using laboratory experiments designed to study lithosphere-scale deformation, we show that the overall pattern of Aegean extension requires not only the combination of trench retreat and Anatolia escape since 15 Ma but also the presence of an inherited lithosphere-scale mechanical discontinuity: the Vardar Suture Zone (VSZ). The reactivation in dextral shear of the eastern branch of the VSZ accommodates both the trench retreat (NS stretching) and the westward escape of Anatolia (EW shortening) in the Cyclades area since 15 Ma. Additionally, our model shows that the North Anatolian Fault (NAF) is a late structure in the evolution of the Aegean, initiated 10 Ma after the onset of Anatolia escape. The model displays displacement sub-domains, which result from strain partitioning instead of being “rigid microplates”, directly comparable to the present-day displacement field (GPS) of the Aegean and western Anatolia. Our modelling provides a simple way to look at the dynamics of Aegean extension in two main stages. From middle Eocene to middle Miocene, extension was only driven by the southward retreat of the Hellenic trench at a rate lower than 1 cm.y-1. Since middle Miocene, the combination of slab rollback with Anatolia westward escape, resulted in a southwest direction of trench retreat, with an accelerating rate of up to 3 cm.y-1.
AGU Fall Meeting 2015
San Francisco, United States

insu-01242045
https://hal-insu.archives-ouvertes.fr/insu-01242045

Éditeur(s) : HAL CCSD
Résumé : High Pressure - Low Temperature (HP-LT) rocks testify for burying and exhumation of crustal material in subduction zones. Their complete exhumation is the result of processes acting during (syn-orogenic) and after (post-orogenic) subduction is active, the latter partly obliterating the first. In the Aegean domain, the Attic-Cycladic Blueschist unit (ACBU) is a HP-LT unit exhumed in metamorphic core complexes (MCCs) in the back-arc domain of the Hellenic subduction zone. This study is an attempt to distinguish features related to syn-orogenic exhumation processes responsible for the first stages of exhumation This syn-orogenic "message" has to be read through the post-convergence structural and thermal overprint that accompanied the formation of the MCCs. Particularly, the geometry, the timing and the amount of the syn-orogenic exhumation has to be determined. We investigate these features with coupled field, metamorphic petrology and radiochronology studies First, based on observations on Ios (southern Cyclades), it has recently been proposed that syn-orogenic exhumation of the ACBU was accommodated by a basal thrust over the Cycladic Basement (CB) [Huet, et al., 2009]. The peak conditions, deduced from pseudosections calculation for the Ios main lithologies, are 500 °C-19 kbar for the ACBU and 550 °C-16 kbar for the CB. Exhumation until 400 °C-8 kbar is considered as syn-orogenic. Second, phengites populations, single grains and in situ 40Ar-39Ar geochronology has been carried out on samples from Tinos and Andros (northern Cyclades), Syros (central Cyclades) and Ios. The results gather in several clusters: 50-55 Ma, 40-45 Ma, 30-35 Ma, and 22-26 Ma. Based on these new P-T-t data and a synthesis of published data, we are able to refine the geometry and the timing of the exhumation of the ACBU. Data from the whole Cyclades exhibit little differences in ages and P-T conditions for the successive stages of exhumation. The peak of pressure (500±50 °C-18±1 kbar) has been reached at 50-55 Ma from Tinos to Ios. The onset of the exhumation occurred at 40-45 Ma in blueschist facies conditions, between a thrust at their bottom and a detachment at their top. The following decompression was accompanied by cooling until 30-35 Ma (400±50 °C-8±1 kbar). At that time, the boundary conditions switched to extension. Finally, we propose a model for the exhumation of HP-LT units accounting for these data. We also consider the rheological implications of the syn-orogenic structuration of the Aegean wedge on the post-orogenic evolution. B. Huet, L. Labrousse, and L. Jolivet [2009] Thrust or detachment? Exhumation processes in the Aegean: Insight from a field study on Ios (Cyclades, Greece), Tectonics, 28, 3, doi:10.1029/2008TC002397.
EGU General Assembly
Vienne, Austria

insu-00839054
https://hal-insu.archives-ouvertes.fr/insu-00839054
BIBCODE : 2010EGUGA..1214098H

Éditeur(s) : HAL CCSD
Résumé : This historical perspective provides an overall view of the main steps that led to the acceptance of the concept of mantle exhumation accompanying lithosphere stretching and extreme crustal thinning. We first remember that the presence of exposures of mantle rocks along oceanic spreading ridges was early reported in the 60's due to the results of sediment cores and dredge hauls collected along the Mid-Atlantic Ridge. In the meantime, detailed analysis of the relationships between oceanic sediments of Late Jurassic age and their primary basement in the Apennine ophiolites led many authors to point to the importance of exhumation of mantle rocks on ancient seafloors. By contrast to the thick sections of classical ophiolites (e.g. Oman), the Alpine-Corsican-Appennine ophiolites are characterized by a relatively small amount of mafic rocks (gabbros and basalts), by the absence of any sheeted dyke complex and by the frequent occurrence of oceanic sediments stratigraphically overlying mantle-derived peridotites and associated gabbroic intrusions. They display some of the characteristics of slow-spreading ridge systems, but, due to their highly tectonized character, they have been interpreted successively either as remnants of oceanic fracture zones of normal ocean or as remnants of very-poorly organized, abnormal oceanic basement. This review shows how the concept of mantle exhumation has been elaborated more or less in the same period both by marine geoscientists and by geologists conducting investigations in ophiolitic units of the Alps-Apennines mountain belt. Dredging and diving results from the Gorringe Bank, the Iberia margin, the Thyrrenian Sea and the Central Atlantic in the 1980's and 1990's provided additional proofs that the mantle is currently exhumed in various oceanic environments, including distal continental margins, back-arc basins and slow-spreading ridges of wide oceans. It is shown finally how renewed cross-information from mountain belts and the oceans, multiplying the examples of sedimentary reworking of mantle material, help better constrain the mechanisms of mantle exhumation. This mechanism progressively appeared as a fundamental step during the processes of extension of both continental and oceanic lithospheres in numerous geological situations worldwide.
Bollettino della Società Geologica Italiana

hal-00475653
https://hal.archives-ouvertes.fr/hal-00475653
DOI : 10.3301/IJG.2009.128.2.279

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Physical modeling of oblique subduction is performed to study the mechanism of strain partitioning. The model is two-layer and includes the elasto-plastic lithosphere (the overriding and subducting plates) and the low-viscosity liquid asthenosphere. The subduction is driven by a push force from a piston and a pull force when the density contrast Ap between the subducting plate and the asthenosphere is positive. We vary both Ap and the interplate friction (frictional stresses). Slip partitioning is obtained only in the models with high interplate friction and only when the overriding plate contains a weak zone. This zone in the models corresponds either to locally thinned litho-sphere or to cut (fault). The horizontal, trench-normal component of the interplate friction force [Ffh[ can be comparable with the absolute value of the horizontal component of the nonhydrostatic interplate pressure force [Fph [ in the subduction zone. Ffh is always negative (compression), while Fph can be either negative (compressional subduction regime) or positive (extensional regime). High friction, which promotes partitioning, can completely cancel the extensional (suction) force Fph. Back arc tension and strike-slip faulting appear thus as conflicting processes, although they can coexist in the same subduction zone, depending on the relative values of relevant forces. It appears that high friction can exist only in compressional subduction zones where partitioning should develop more easily. This conclusion is supported by the comparison of two oblique subduction zones, having similar geometry: the compressional southern Kurile zone (strong partitioning) and extensional southern Ryukyu zone (no lithospheric-scale partitioning). Other factors controlling the strain partitioning are the length of the oblique subductlon zone, the boundary conditions at the transverse limits of the forearc sliver, and of course, the obliquity of subduction.
ISSN: 2169-9275

hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396/document
https://hal.archives-ouvertes.fr/hal-01261396/file/chemendaJGR2000.pdf
DOI : 10.1029/1999JB900332

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Spinel (± plagioclase) peridotite xenoliths from the Tallante and Los Perez volcanic centres in the eastern Betics (SE Spain) range from depleted (clinopyroxene-poor) harzburgites to fertile (clinopyroxene-rich) lherzolites and orthopyroxene-free wehrlites. Significantly, only one harzburgite, which is depleted in heavy rare earth elements (HREE), retains the imprint of ca. 20% ancient melting of an original garnet lherzolite source. In contrast, REE abundances of other harzburgites and lherzolites from the eastern Betics have been increased by melt-rock reaction. The whole-rock and mineral compositions of these mantle rocks are largely controlled by three types of modal metasomatism: 1) common clinopyroxene-orthopyroxene addition and olivine consumption which increased FeOt, SiO2 and Al2O3, and decreased MgO compared to the refractory melting products; 2) subordinate orthopyroxene dissolution and precipitation of clinopyroxene and olivine, which led to higher FeOt and MgO and lower SiO2 than in common (orthopyroxene-rich) lherzolites; and 3) rare orthopyroxene consumption and olivine addition that caused higher FeOt and lower SiO2 compared to the original melting residues. These mineral modal and major element variations have been produced mostly by interactions with relatively FeOt-rich/SiO2-poor melts, likely derived from a peridotite-pyroxenite lithospheric mantle with a highly heterogeneous isotopic composition. Melting of the lithospheric mantle in the western Mediterranean was triggered by upwelling of the asthenosphere induced by back-arc extension in the Late Oligocene-Early Miocene. Trapping of small fractions of exotic melts in whole-rocks — likely the parental magmas of Miocene back-arc dykes that intruded the Betic crust — caused local disequilibrium between the trace element signatures and Pb isotopic compositions of clinopyroxene and whole-rock. Subsequent interaction with SiO2-undersaturated magmas, similar to the parental melts of the Pliocene alkali basalts that host the xenoliths, promoted orthopyroxene consumption and clinopyroxene-olivine enrichment at locations close to magma conduits, and finally generated orthopyroxene-free wehrlites. This event constitutes the last episode of the Cenozoic magmatic evolution of the westernmost Mediterranean which is recorded in the mantle xenoliths from the eastern Betics.
ISSN: 0024-4937

hal-01553092
https://hal.archives-ouvertes.fr/hal-01553092
DOI : 10.1016/j.lithos.2016.12.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : A combination of statistical studies on present-day subduction zones and three-dimensional (3D) laboratory models is performed with the aim to clarify the way that plate kinematics control the geometry of the slab and the overriding plate deformation in subduction zones. In 3D laboratory models, the analogue of a two layer linearly viscous lithosphere–upper mantle system is achieved by means of silicon putty glucose syrup tank experiment. The subducting and overriding plate velocities are systematically changed by exploring the variability field of natural plate kinematics. Both statistical and modelling approaches recognize the importance of overriding plate motion on subduction process behavior: (1) trenches migrate at a rate close to the overriding plate motion, but always move slower than the overriding plates. The mechanism at work is a direct consequence of “slab anchoring” opposed by both lithosphere and mantle viscous resistance and is responsible for overriding plate deformation and slab geometry variability. (2) An overriding plate shortens when the overriding plate moves toward the trench and conditions that are favourable for overriding plate extension are created when the overriding plate moves away from the trench. (3) Shallow and steep dips are found if the overriding plate moves toward and away from the trench, respectively.
ISSN: 0012-821X

hal-00406598
https://hal.archives-ouvertes.fr/hal-00406598
DOI : 10.1016/j.epsl.2007.02.004