Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Pyrenean peridotites (lherzolites) form numerous small bodies of subcontinental mantle, a few meters to 3 km across, exposed within the narrow north Pyrenean zone (NPZ) of Mesozoic sediments paralleling the north Pyrenean Fault. Recent studies have shown that mantle exhumation occurred along the future NPZ during the formation of the Albian-Cenomanian Pyrenean basins in relation with detachment tectonics. This paper reviews the geological setting of the Pyrenean lherzolite bodies and reports new detailed field data from key outcrops in the Bearn region. Only two types of geological settings have to be distinguished among the Pyrenean ultramafic bodies. In the first type (sedimented type or S type), the lherzolites occur as clasts of various sizes, ranging from millimetric grains to hectometric olistoliths, within monogenic or polymictic debris flow deposits of Cretaceous age, reworking Mesozoic sediments in dominant proportions as observed around the Lherz body. In the second type (tectonic type or T type), the mantle rocks form hectometric to kilometric slices associated with crustal tectonic lenses. Both crustal and mantle tectonic lenses are in turn systematically associated with large volumes of strongly deformed Triassic rocks and have fault contacts with units of deformed Jurassic and Lower Cretaceous sediments belonging to the cover of the NPZ. These deformed Mesozoic formations are not older that the Aptian-early Albian. They are unconformably overlain by the Albian-Cenomanian flysch formations and have experienced high temperature-low pressure mid-Cretaceous metamorphism at variable grades. Such a tectonic setting characterizes most of the lherzolite bodies exposed in the western Pyrenees. These geological data first provide evidence of detachment tectonics leading to manle exhumation and second emphasize the role of gravity sliding of the Mesozoic cover in the preorogenic evolution of the Pyrenean realm. In the light of such evidence, a simple model of basin development can be inferred, involving extreme thinning of the crust, and mantle uprising along a major detachment fault. We demonstrate coeval development of a crust-mantle detachment fault and generalized gravitational sliding of the Mesozoic cover along low-angle faults involving Triassic salt deposits as a tectonic sole. This model accounts for the basic characteristics of the precollisional rift evolution in the Pyrenean realm.
ISSN: 0278-7407

hal-00512818
https://hal.archives-ouvertes.fr/hal-00512818
DOI : 10.1029/2009TC002588

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The late Carboniferous accretionary system of the South Tianshan orogen (North-Western China) underwent complex structural and polymetamorphic evolution. Combined petrological, geochronological and microstructural analysis of (ultra)high-pressure (UHP) metabasites (eclogites and blueschists) enclosed in metapelites show a relict coarse-grained eclogitic fabric S2 surrounded by a dominant fine-grained eclogite and blueschist facies retrograde fabric S2. The S2 fabric is reworked by upright folds F3 that are responsible for a major shortening of the whole accretionary system. For both the eclogite and blueschist, peak and retrograde P–T conditions have been thermodynamically constrained at 25–26 kbar and 425–500 °C and 10–13 kbar and 500−550 °C respectively, suggesting a shared exhumation history. The garnet-whole rock-amphibole isochron in the blueschist yielded Lu–Hf and Sm–Nd ages of 326.0 ± 2.9 Ma and 318.4 ± 3.9 Ma respectively, interpreted to date the prograde to peak metamorphic assemblage. The retrograde path of the eclogite is characterized by heterogeneous omphacite recrystallization into a mylonitic fine-grained matrix and crystallization of blue amphibole. Microstructures in both pristine porphyroclastic and recrystallized fine-grained domains in the eclogite indicate a gradual evolution from constriction-dominated (L>S-type) to flattening-dominated (S>L-type) type of deformation, increase of fabric intensity reflected by gradually growing M-indexes and the development of lattice preferred orientation (LPO) typical for dislocation creep under slightly hydrated conditions. Recrystallization of the matrix in the blueschist is homogeneous, which indicates a matrix dominated channel flow during exhumation. These LPOs evolutions suggest a significant mechanical coupling with the upper plate concomitant with oroclinal bending of the Kazakh orocline. Lock up of Kazakh orocline is responsible for further stress increase resulting in horizontal shortening of South Tianshan accretionary wedge and development of D3 upright folding and steepening of the whole sequence.
ISSN: 1342-937X

hal-01481263
https://hal.archives-ouvertes.fr/hal-01481263
DOI : 10.1016/j.gr.2016.07.007

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The Ronda orogenic peridotite (southern Spain) contains a variety of pyroxene-rich rocks ranging from high-pressure garnet granulites and pyroxenites to low-pressure plagioclasespinel websterites. The 'asthenospherized' part of the Ronda peridotite contains abundant layered websterites ('group C' pyroxenites), without significant deformation, that occur as swarms of layers showing gradual modal transitions towards their host peridotites. Previous studies have suggested that these layered pyroxenites formed by the replacement of refractory spinel peridotites. Here, we present a major- and trace-element, and numerical modelling study of a layered outcrop of group C pyroxenite near the locality of Tolox aimed at constraining the origin of these pyroxenites after host peridotites by pervasive pyroxene-producing, refertilization meltrock reactions. Mg-number [=Mg/(Mg + Fe) cationic ratio] numerical modelling shows that decreasing Mg-number with increasing pyroxene proportion, characteristic of Ronda group C pyroxenites, can be accounted for by a melt-consuming reaction resulting in the formation of mildly evolved, relatively low Mg-number melts (similar to 0.65) provided that the melt fraction during reaction and the time-integrated melt/rock ratio are high enough (>0.1 and >1, respectively) to balance Mg-Fe buffering by peridotite minerals. This implies strong melt focusing caused by melt channelling in high-porosity domains resulting from compaction processes in a partial melted lithospheric domain below a solidus isotherm represented by the Ronda peridotite recrystallization front. The chondrite-normalized rare earth element (REE) patterns of group C whole-rocks and clinopyroxenes are convex-upward. Numerical modeling of REE variations in clinopyroxene produced by a pyroxene-forming, melt-consuming reaction results in curved trajectories in the (Ce/Nd)(N) vs (Sm/Yb)(N) diagram (where N indicates chondrite normalized). Based on (Ce/Nd)(N) values, two transient, enriched domains between the light REE (LREE)-depleted composition of the initial peridotite and that of the infiltrated melt may be distinguished in the reaction column: (1) a lower domain characterized by convex-upward REE patterns similar to those observed in Ronda group C pyroxeniteperidotite; (2) an upper domain characterized by melts with strongly LREE-enriched compositions. The latter are probably volatile-rich, small-volume melt fractions residual after the refertilization reactions that generated group C pyroxenites, which migrated throughout the massifincluding the unmelted lithospheric spinel-tectonite domain. The Ronda mantle domains affected by pyroxenite- and dunite- or harzburgite-forming reactions (the 'layered granular' subdomain and 'plagioclase-tectonite' domain) are on average more fertile than the residual, 'coarse granular' subdomain at the recrystallization front. This indicates that refertilization traces the moving boundaries of receding cooling of a thinned and partially melted subcontinental lithosphere. This refertilization process may be widespread during transient thinning and melting of depleted subcontinental lithospheric mantle above upwelling asthenospheric mantle.
ISSN: 0022-3530

hal-00412200
https://hal.archives-ouvertes.fr/hal-00412200
DOI : 10.1093/petrology/egn014

Éditeur(s) : HAL CCSD
Résumé : International audience
The Kazdağ Massif exposes a metamorphic dome in the Biga Peninsula of northwest Turkey. An extensional origin has been proposed for the dome, limited on both flanks by detachments and/or shear zones. The northern flank is bounded by the extensional Alakeçi Shear Zone (ASZ), whose P-T-t path is still poorly known. We therefore focus on its metamorphic conditions and related temporal history to precise its tectono-metamorphic evolution. The local tectonostratigraphy in structurally ascending order comprises: (i) the high-grade metamorphic core rocks of the Kazdaǧ Massif (gneisses and micaschists intercalated with amphibolites and marbles); (ii) the two kilometer-thick ASZ; (iii) the overlaying unmetamorphosed pre-Cenomanian accretionary Çetmi mélange; and (iv) Neogene sedimentary and volcanic cover rocks. ASZ mylonites were derived from both the core rocks and the mélange lithologies. From the north to the south the mylonitic fabrics in the ASZ depict a top-to-the N-NNE shearing, parallel to the NNE-plunging stretching lineation and NNW-dipping mylonitic foliation. This geometry implies normal sense movement i.e. north-side down-dip extensional displacement along this flank of the Kazdaǧ Massif. The northward transition from ductile to brittle-ductile regime through the ASZ shows that the deformation occurred at decreasing temperatures and degree of metamorphism. The paragenesis in equilibrium within the mylonitic gneisses and schists contains Qtz + Fs + Ms + Bt + Grt ± St ± Sill, with late retrogressive chlorite after biotite and garnet. Four samples of ASZ rocks yielded pressures between 6.9-5.7 kbar and temperatures between 706-587°C. Three samples from the mylonitic rocks supplied in situ isochron 36Ar/40Ar mica ages between 31.2-24.2 Ma, which we interpret to date the cooling of the mylonites following the P-T decrease across the ASZ. The metamorphic and structural results support the extensional character of the ASZ, and sketch transition from sillimanite core gneisses in the deeper structural levels to chlorite schists towards the top of the shear zone. These new data allow to precise the peak P-T conditions and the temporal evolution in the northern flank of the Kazdaǧ Massif, where Late Oligocene extensional exhumation was assisted by NNE-directed ductile-brittle ASZ, which had operated from amphibolite to greenschist facies. At the regional scale, this tectono-metamorphic pattern is similar to those observed on other places of the north Aegean domain.
IOP Conference Series
Austin, TE, United States

hal-00642725
https://hal-brgm.archives-ouvertes.fr/hal-00642725
DOI : 10.1088/1755-1307/2/1/012012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The basement of central Madagascar displays two contrasted structural patterns. The first one (D1) is characterized by north-striking foliations that are gently dipping to the west and carry W- to WSW-plunging lineations, whereas the second one (D2) is characterized by steeper foliations that are striking to the NNE and lineations that are either subhorizontal or gently plunging to the SSW. The younger pattern is related to late-Panafrican tectonics along the major Angavo shear zone that is about 1000 km in length and 40 km in width with apparently little offset. Deformation in the Angavo zone induced interference folding on both sides. The D2 event is characterized by low pressures (ca 400 MPa) and high temperatures (up to 790 degrees C) responsible for prograde granulite facies conditions, that resulted from heat transfer due to magma and fluid advection in the Angavo shear zone. The D2 event is pinned at 550 +/- 11 Ma by a new monazite age from a reoriented Andringitrean granite near Ankaramena. A new suite of amphibole and biotite Ar-Ar geochronological data enables to retrace the thermochronogical evolution inside and outside the Angavo shear zone. Combined with new structural results from the western interference zone. these ages yield a better understanding of the late-Panafrican history of central Madagascar. No diachronism is observed along the strike of the Angavo shear zone. Conversely, amphibole and especially biotite ages decrease from West to East, i.e. towards the shear zone. These new ages range from 511 to 469 Ma. A 1-D conductive model constrains the thermal effect in relation with the Angavo shear zone to be restricted to a lateral distance of ca 60 km (in map view) for a maximum heating duration of 20 Myr. This is in agreement with the Ar-Ar data and with the width of the observed interference zone. Following this episode of deformation and heat transfer, the estimated cooling rates of the Angavo shear zone range from to 15 to 6 degrees C/Myr, respectively before and after 515 Ma. A post-collision intracontinental setting is suggested for the Angavo shear zone, which is regarded as a remote effect of the Kuunga Orogeny between India and Antarctica.
ISSN: 0040-1951

hal-00463507
https://hal.archives-ouvertes.fr/hal-00463507
DOI : 10.1016/j.tecto.2009.03.009

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Unravelling the detailed pressure–temperature–time-deformation (P–T–t-D) evolution of magmatic and metamorphic rocks provides essential insights into the timing and duration of partial melting and related plutonism during crustal flow and migmatitic dome formation. The Montagne Noire Axial Zone (MNAZ) is a migmatitic dome located within the Variscan orogen in the southern French Massif Central. The timing of the main thermal event that was responsible for intense partial melting is still highly debated. In this study we present new laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) age data on micaschists, migmatites and granites that clarify the P–T–t-D evolution of the MNAZ. Structurally controlled samples were collected in order to constrain the timing of metamorphism, migmatization and plutonism regarding the main structural pattern D1, D2 and D3. D1 and D2 correspond to nappe stacking and dextral transpression, respectively. D3 is related to vertical shortening and coaxial thinning with a preferential NE–SW- to E–W-directed stretching. LA-ICP-MS analyses on the syntectonic Anglès, Soulié and Martys granites yielded U–Th/Pb monazite ages of 305 ± 1.5, 306 ± 1.9 and 314 ± 2 Ma, respectively. Five migmatitic rocks sampled in the eastern and central Espinouse area yielded in situ ages ranging between 312 ± 2 and 301 ± 2 Ma. Along the dome envelope, two garnet–staurolite-bearing micaschists near Saint-Pons-de-Thomières village gave in situ U–Th–Pb ages of 312.1 ± 2.1 and 309.0 ± 3.1 Ma. A fine-grained gneiss with a D3 fabrics in the eastern dome envelope yield a 208Pb/232Th mean age at 305.7 ± 3.9 Ma. All ages obtained in this study for the micaschists, migmatites and granites range between 315 and 301 Ma. We interpret this time span as the record of the high thermal event responsible for intense crustal partial melting within the lower and middle crust. The onset of partial melting occurred at ca. 315 Ma that marked the beginning of transpressional deformation D2. Based on structural and petrological studies, our new U–Th–Pb results suggest that (1) partial melting may have started at ca. 315 Ma and lasted 15–10 Myr and (2) D2 et D3 developed between 315 and 300 Ma and were synchronous. D1 deformation ended at 315 Ma. The onset and duration of D1 related to nappe stacking and crustal thickening is still uncertain.
ISSN: 1437-3254

hal-01526942
https://hal.archives-ouvertes.fr/hal-01526942
DOI : 10.1007/s00531-016-1417-x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Recent geochemical work shows that subduction-zone serpentinites are repositories for fluid-mobile elements absorbed during interaction with sediment-derived fluids. Unraveling the geochemical fingerprint of these rocks helps to define timing of tectonic accretion of sediments along the subduction interface and the role of serpentinite in element recycling to volcanic arcs. Here we present the trace element and isotopic composition (B–O–H, Sr, Pb) of high-pressure serpentinites from the Voltri Massif (Ligurian Western Alps, Italy), to discuss their role as incompatible element carriers and their contribution to recycling of sediment-derived components in subduction zones.The serpentinites presented here record metamorphic olivine growth during eclogite-facies metamorphism and show undeformed and mylonitic textures. Field relations show that undeformed rocks are enclosed in deformed ones and that no metasedimentary rocks are present nearby. Undeformed serpentinite has very high δ11BSRM951 (from +26‰ to +30‰), low Sr and Pb isotope ratios (87Sr/86Sr = 0.7053–0.7069; 206Pb/204Pb = 18.131–18.205) and low As and Sb contents (0.1 and 0.01 μg/g, respectively). Oxygen and hydrogen isotope compositions are +4.5‰ and −67‰, respectively. In contrast, mylonitic serpentinite shows lower δ11B (from +22‰ to +17‰), significant enrichment in radiogenic Sr and Pb isotopes (87Sr/86Sr up to 0.7105; 206Pb/204Pb up to 18.725), and enrichment in As and Sb (1.3 and 0.39 μg/g, respectively). δ18O of the mylonitic serpentinites reaches values of +5.9‰, whereas δD is comparable with that of undeformed rocks (approximately −70‰). In mylonitic serpentinites, the B and Sr isotopic values and the fluid-mobile element (FME) concentrations are near those for the Voltri metasedimentary rocks (calc- and mica-schists). Pb systematics also reveal influx of a crust-derived component.Our dataset shows that undeformed serpentinite still preserves an oceanic geochemical fingerprint, whereas mylonitic serpentinite is reset in its concentrations of FME and its B, Sr and Pb isotope compositions, due to interaction with sediment- and crust-derived fluids. The environment of this interaction is either compatible with (i) an outer-rise zone setting, with percolation of seawater-derived fluids enriched in sedimentary components into bending-related fault structures, or with (ii) subduction channel domains, where ascending sediment-derived slab fluids infiltrate slices of former oceanic serpentinite accreted to the plate interface domain. Influx of sediment-derived subduction fluids along major deformation zones in serpentinite modifies the element budget of the rocks, with important implications for element recycling and the tectonic history of serpentinite. The B, Sr and Pb isotopic systematics, coupled with FME concentration in serpentinites are particularly helpful geochemical tracers of interaction between different reservoirs in subduction-interface environments, and are more sensitive than the traditionally applied stable oxygen and hydrogen isotope compositions.
ISSN: 0016-7037

hal-01419940
https://hal.archives-ouvertes.fr/hal-01419940
DOI : 10.1016/j.gca.2016.06.034

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
A San Carlos olivine polycrystal has been deformed under uppermost mantle conditions, by compression at 900 °C, at a strain rate of 1.1 × 10−5 s−1, under a confining pressure of 300 MPa, using the Paterson press. Transmission electron tomography of dislocations has been performed by scanning transmission electron microscopy, by conventional transmission electron microscopy using the weak-beam dark-field technique, associated with precession or not, in order to determine the glide planes of [001] screw dislocations. This recent technique is the most suitable one since most [001] dislocations exhibit straight screw segments due to the high lattice friction on this character at low temperature. We find that [001] dislocations glide in (100), (010) and {110} as already reported, but also more unexpectedly in {120} and {130}. We show that at 900 °C, [001] {110} glide is dominant in polycrystals. We have, however, noted and characterized numerous cross-slip events in the specimen.
ISSN: 0342-1791

hal-01054330
https://hal.archives-ouvertes.fr/hal-01054330
DOI : 10.1007/s00269-014-0665-1

Éditeur(s) : HAL CCSD
Résumé : International audience
We present an overview of the Mid-Cretaceous hyper-extended rift systemexposed in the northern part of the Pyrenean mountain range. Itsinversion during the Pyrenean orogeny allows for precious observationsof the deep-seated processes occurring at the foot of distal margins.Some peculiar aspects characterizing the pre-Alpine hyper-extended domainare examined throughout the 400 km long suture that is fossilizedin the North Pyrenean Zone (NPZ). The high temperature/low pressure(HT/LP) thermal imprint of the extensional event is studied thanksto a dataset of more than hundred peak temperature measurementsby Raman spectroscopy of the carbonaceous material (RSCM). Thepre- and syn-rift metasediments are characterized by an intense, synmetamorphicductile deformation. Focusing on several key-localitiesof the NPZ, we examine the emplacement conditions of the peridotitesin response to this extreme crustal thinning. Geological evidencessuch as the occurrence of peridotite bodies directly underlying metamorphicpre-rift sediments indicate an early attenuation of the rifted continentalcrust. Moreover, syn-rift, Albian-Cenomanian flysch sequenceswere deposited synchronously with the syn-metamorphic ductile deformationof the pre-rift sequences. All along the Internal MetamorphicZone (IMZ), the base of the flysch deposits also recorded the HT tectonicevent. Such a synchronicity between geological events, which aregenerally separated in time, is not common in mountain belts. We examinehow tectonics, metamorphism and sedimentation may be activein a single basin during extension. We propose an original mechanismfor the evolution of the basins involving continuous basal extraction ofthe pre-rift metamorphic sediments. This early HT deformation eventrelates to the « phase anté-Cénomanienne » described by Pyrenean geologistssince 1930.
24 ème Réunion des sciences de la Terre 2014
Pau, France

insu-01080795
https://hal-insu.archives-ouvertes.fr/insu-01080795

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Quartz is a common crustal mineral that deforms plastically in a wide range of temperatures and pressures, leading to the development of different types of crystallographic preferred orientation (CPO) patterns. In this contribution we present the results of an extensive modeling of quartz fabric transitions via a viscoplastic self-consistent (VPSC) approach. For that, we have performed systematic simulations using different sets of relative critical resolved shear stress of the main quartz slip systems. We have performed these simulations in axial compression and simple shear regimes under constant Von Mises equivalent strain of 100% (γ = 1.73), assuming that the aggregates deformed exclusively by dislocation glide. Some of the predicted CPOs patterns are similar to those observed in naturally and experimentally deformed quartz. Nevertheless, some classical CPO patterns usually interpreted as result from dislocation glide (e.g. Y-maxima due to prism < a > slip) are clearly not developed in the simulated conditions. In addition we reported new potential preferred orientation patterns that might happen in high temperature conditions, both in axial compression and simple shear. We have demonstrated that CPOs generated under axial compression are usually stronger that those predicted under simple shear, due to the continuous rotation observed in the later simulations. The fabric strength depends essentially on the dominant active slip system, and normally the stronger CPOs result from dominant basal slip in < a >, followed by rhomb < a > and prism [c] slip, whereas prism < a > slip does not produce strong fabrics. The opening angle of quartz [0001] fabric used as a proxy of temperature seems to be reliable for deformation temperatures of ~ 400 °C, when the main slip systems have similar behaviors.
ISSN: 0040-1951

hal-01115674
https://hal.archives-ouvertes.fr/hal-01115674
DOI : 10.1016/j.tecto.2014.08.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Intraplate deformation is most often linked to major stress applied on plate margins. When such intraplate events are accompanied by magmatism, the use of several dating methods integrated within a multidisciplinary approach can bring constraints on the age, nature and source mobilized for generating the magma and in turn on the nature of the intraplate deformation. This study focuses on the large gabbro Arrikine sill (35 km in extension) emplaced within the Silurian sediments of the western margin of the Murzuq cratonic basin in southeastern Algeria. Its emplacement is dated during the early Devonian (415-400 Ma) through the determination of a reliable paleomagnetic pole by comparison with the Gondwana Apparent Polar Wander Path (APWP). This age can be correlated with deep phreatic eruptions before Pragian time thought to be at the origin of sand injections and associated circular structures in Algeria and Libya. For the sill, the K–Ar age of 325.6 ± 7.7 Ma is related to a K-rich aplitic phase that has K-enriched by more than 20% the Devonian gabbro. Laser-ICP-MS U–Pb method dates only inherited zircons mostly at c. 2030 Ma with additional ages at c. 2700 Ma and younger ones in the 766-598 Ma age range. The Arrikine sill is a high-Ti alkaline gabbro having the geochemical composition of a hawaiite akin to several intraplate continental and oceanic provinces, including the contemporaneous Aïr ring complexes province in Niger, but also to the Mauna Loa volcano in Hawaii. This peculiar composition akin to that of the contemporaneous Aïr province is in agreement with a lower Devonian age for the Arrikine sill.The lower Devonian Arrikine sill emplacement is related to a “Caledonian” transtensive reactivation of the western metacratonic boundary of the Murzuq craton. This event also generated in the Saharan platform the so-called “Caledonian unconformity” of regional extension, the Aïr ring complexes and magmatic rocks that produced sand injections. It could be related to rifting of the Hun terranes that occurred at the plate margin to the north (Stampfli and Borel, 2002, Blackey, 2008 and references therein). The mid-Carboniferous (c. 326 Ma) reactivation corresponds to Variscan compression on NW Africa generating aplitic fluids, but also to the major “Hercynian unconformity” of regional extension. The generation of the Arrikine magma is attributed to partial melting through adiabatic pressure release of uprising asthenosphere along tectonically reactivated mega-shear zones, here bordering the relictual Murzuq craton enclosed in the Saharan metacraton.
ISSN: 0899-5362

hal-01306637
https://hal.archives-ouvertes.fr/hal-01306637
DOI : 10.1016/j.jafrearsci.2015.11.019

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Dehydration reactions result in minerals’ replacement and a transient fluid-filled porosity. These reactions involve interface-coupled dissolution–precipitation and might therefore lead to fixed crystallographic orientation relations between reactant (protolith) and product phases (i.e. topotaxy). We investigate these two phenomena in the dehydration of a foliated antigorite (atg) serpentinite by comparing the crystallographic preferred orientation (CPO) developed by olivine (ol), orthopyroxene (opx) and chlorite (chl) during high-pressure antigorite and chlorite dehydration in piston-cylinder experiments and in natural samples recording the dehydration of antigorite (Cerro del Almirez, Betic Cordillera, Spain). Experiments were performed under undrained conditions resulting in fluid-filled porosity and in strong CPO of the prograde minerals, controlled by the pre-existing antigorite CPO in the reactant foliated serpentinite. The orientation of a ol,opx and c∗chl is parallel to c∗atg from the protolith. The Cerro del Almirez samples show similar, locally well-developed topotactic relations between orthopyroxene, chlorite and antigorite, but the product CPOs are weaker and more complex at the thin section scale. In contrast to the experiments, olivine from natural samples shows a weak correlation between b ol and the former c∗atg. We relate the strengthening of local topotactic relations and the weakening of the inherited CPO at a larger scale in natural samples to compaction and associated fluid migration. Microstructural features that might be related to compaction in the natural samples include: (1) smooth bending of the former foliation, (2) gradual crystallographic misorientation (up to 16°) of prismatic orthopyroxene due to buckling by dislocation creep, (3) inversion of enstatite to low clinoenstatite (P21/c) along lamellae and (4) brittle fracturing of prismatic orthopyroxene enclosed by plastically deformed chlorite. The coexistence of orthopyroxene buckling and clinoenstatite lamellae enables estimating the local strain rates and shear stresses generated during compaction. An lower bound for the strain rates in the order of 10−12 to 10−13 s−1 and shear stresses of 60–70 MPa are estimated based on creep data. Lower shear stresses (20–40 MPa) are retrieved using a theoretical approach. These data point to slow compaction (and fluid extraction) in nature if the system is not perturbed by external forces, with rates only marginally higher than the viscoplastic deformation of the solid matrix.
ISSN: 0010-7999

hal-01174158
https://hal.archives-ouvertes.fr/hal-01174158
DOI : 10.1007/s00410-015-1129-4

Éditeur(s) : HAL CCSD
Résumé : International audience
Characterizing the hydraulic properties of heterogeneous and complex aquifers often requires field scale investigations at multiple space and time scales to better constrain hydraulic property estimates. Here, we present and discuss results from the site of Ploemeur (Brittany, France) where complementary hydrological and geophysical approaches have been combined to characterize the hydrogeological functioning of this highly fractured crystalline rock aquifer. In particular, we show how cross-borehole flowmeter tests, pumping tests and frequency domain analysis of groundwater levels allow quantifying the hydraulic properties of the aquifer at different scales. In complement, we used groundwater temperature as an excellent tracer for characterizing groundwater flow. At the site scale, measurements of ground surface deformation through long-base tiltmeters provide robust estimates of aquifer storage and allow identifying the active structures where groundwater pressure changes occur, including those acting during recharge process. Finally, a numerical model of the site that combines hydraulic data and groundwater ages confirms the geometry of this complex aquifer and the consistency of the different datasets. The Ploemeur site, which has been used for water supply at a rate of about 106 m3 per year since 1991, belongs to the French network of hydrogeological sites H+ and is currently used for monitoring groundwater changes and testing innovative field methods.
AGU Fall Meeting 2014
San Francisco, United States

insu-01088596
https://hal-insu.archives-ouvertes.fr/insu-01088596

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In order to estimate the seismic anisotropy of subducted crust, polycrystalline samples of KA1Si(3)O(8) K-lingunite (25% of the total subducted transformed sediments), have been synthesized and deformed under the temperature and pressure conditions of the subducted slabs. Transmission electron microscopy (TEM) characterizations of the recovered samples reveal that the microstructures are clearly dominated by [001] glide involving screw dislocations. For this reason, only {100} could be identified as glide planes, the question of [001] slip on {110} remains open. Few 1/2 < 111 > dislocations were observed gliding on {110} planes, which implies that 1/2 < 111 > {110} is a harder slip system than those involving [001] slip. The occurrence of sub-grain boundaries suggests that diffusion and climb might be active under these conditions.;To assess the texture of polycrystalline K-lingunite, the crystal preferred orientations (CP05) were calculated using visco-plastic self-consistent (VPSC) polycrystalline plasticity model in simple shear using the slip systems identified by TEM. Finally, the seismic properties of K-lingunite aggregates were calculated from the CPO and single crystal elasticity tensor. K-lingunite is predicted to have a high seismic anisotropy, which could combine constructively with one of the stishovite (same proportion as K-lingunite at the transition zone depth ranges).
ISSN: 0031-9201

hal-00534050
https://hal.archives-ouvertes.fr/hal-00534050
DOI : 10.1016/j.pepi.2010.06.013