Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Structural controls are critical during magmatic-to-hydrothermal transition in the formation of intrusion-related gold deposits. They may explain why only some parts of intrusions are mineralized and why only very few intrusions host large deposits. Moreover, most of these gold deposits postdate peak regional metamorphism and were formed in zones of relatively low strain. Indeed, the efficiency of structural gold traps is highest along favourably oriented intrusion/host-rock contacts where mechanical instability maintains high permeability in the cracked thermal aureole. This may be reinforced by melt injections from an underlying root zone. We present a structural analysis of the deformation features of a granite-pluton roof; large-scale dykes and a network of gold veins are intensively developed in this roof, recording a succession of mechanical instabilities. Our gravity survey underlines the presence of a pluton feeder zone located just beneath the mineralized network. It is argued that interferences between regional stress and melt injection in the feeder zone favoured the development of the network by strain located close to the granite roof. This stresses the role of mechanical instabilities triggered by the combined effects of regional stress and melt dynamics in determining the location and size of this type of gold deposit.
ISSN: 0191-8141

insu-00914780
https://hal-insu.archives-ouvertes.fr/insu-00914780
https://hal-insu.archives-ouvertes.fr/insu-00914780/document
https://hal-insu.archives-ouvertes.fr/insu-00914780/file/manuscript.pdf
DOI : 10.1016/j.jsg.2013.11.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The late Carboniferous accretionary system of the South Tianshan orogen (North-Western China) underwent complex structural and polymetamorphic evolution. Combined petrological, geochronological and microstructural analysis of (ultra)high-pressure (UHP) metabasites (eclogites and blueschists) enclosed in metapelites show a relict coarse-grained eclogitic fabric S2 surrounded by a dominant fine-grained eclogite and blueschist facies retrograde fabric S2. The S2 fabric is reworked by upright folds F3 that are responsible for a major shortening of the whole accretionary system. For both the eclogite and blueschist, peak and retrograde P–T conditions have been thermodynamically constrained at 25–26 kbar and 425–500 °C and 10–13 kbar and 500−550 °C respectively, suggesting a shared exhumation history. The garnet-whole rock-amphibole isochron in the blueschist yielded Lu–Hf and Sm–Nd ages of 326.0 ± 2.9 Ma and 318.4 ± 3.9 Ma respectively, interpreted to date the prograde to peak metamorphic assemblage. The retrograde path of the eclogite is characterized by heterogeneous omphacite recrystallization into a mylonitic fine-grained matrix and crystallization of blue amphibole. Microstructures in both pristine porphyroclastic and recrystallized fine-grained domains in the eclogite indicate a gradual evolution from constriction-dominated (L>S-type) to flattening-dominated (S>L-type) type of deformation, increase of fabric intensity reflected by gradually growing M-indexes and the development of lattice preferred orientation (LPO) typical for dislocation creep under slightly hydrated conditions. Recrystallization of the matrix in the blueschist is homogeneous, which indicates a matrix dominated channel flow during exhumation. These LPOs evolutions suggest a significant mechanical coupling with the upper plate concomitant with oroclinal bending of the Kazakh orocline. Lock up of Kazakh orocline is responsible for further stress increase resulting in horizontal shortening of South Tianshan accretionary wedge and development of D3 upright folding and steepening of the whole sequence.
ISSN: 1342-937X

hal-01481263
https://hal.archives-ouvertes.fr/hal-01481263
DOI : 10.1016/j.gr.2016.07.007

Éditeur(s) : HAL CCSD Copernicus Publications
Résumé : International audience
During Ocean Drilling Program Leg 134, a mixed sequence of volcaniclastic and carbonate sediments was cored together with basaltic breccias and a single basalt sill in Hole 833B. In this study, data from Schlumberger's Geochemical Logging Tool, together with physical property logs, characterise part of the section and establish a complete log-derived lithostratigraphy. The major transition between the sedimentary rocks and a basaltic sill at 830 mbsf (metres below sea floor) is clearly seen as well as the distinction between the silicate-rich sediments and the carbonate-rich part of the section. The transition between the volcanic sandstone interbedded with basaltic and sed-lithic breccia of Unit III, and the volcanic sandstone of Unit IV is clearly marked by the physical property logs. The accuracy of the logging data was evaluated and discussed with an improved log versus core correlation. The cluster analysis of the complete data set shows a correlation with the data provided by the mechanical caliper device, which in turn indicates the quality of the borehole.
ISSN: 1816-8957

hal-00642165
http://hal.upmc.fr/hal-00642165
http://hal.upmc.fr/hal-00642165/document
http://hal.upmc.fr/hal-00642165/file/Rabaute_et_al-SciDrilling-1997.pdf

Éditeur(s) : HAL CCSD GIA - Gemological Institute of America
Résumé : A new opal deposit was discovered in 2008 near the village of Wegel Tena, in volcanic rocks of Ethiopia's Wollo Province. Unlike previous Ethiopian opals, the new material is mostly white, with some brown opal, fire opal, and colorless "crystal" opal. Some of it resembles Australian and Brazilian sedimentary opals, with play-of-color that is often very vivid. However, its properties are consistent with those of opal-CT and most volcanic opals. Inclusions consist of pyrite, barium-manganese oxides, and native carbon Some samples show "digit patterns", interpenetrating play-of-color and common opal, resembling fingers. The opaque-to-translucent Wegel Tena opals become transparent when soaked in water, showing a remarkable hydrophane character. White opals from this deposit contain an elevated Ba content, which has not been reported so far in opal-CT. The fire and crystal opals are prone to breakage, while the white, opaque-to-translucent opals are remarkably durable. The proportion of gem-quality material in the Wegel Tena deposit seems unusually high, and 1,500 kg have already been extracted using rudimentary mining techniques. The deposit may extend over several kilometers and could become a major source of gem-quality opal
ISSN: 0016-626X

hal-00560177
https://hal.archives-ouvertes.fr/hal-00560177

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The lithospheric mantle is intrinsically heterogeneous and anisotropic. These two properties govern the repartition of deformation, controlling intraplate strain localization and development of new plate boundaries. Geophysical and geological observations provide clues on the types, ranges, and characteristic length scales of heterogeneity and anisotropy in the lithospheric mantle. Seismic tomography points to variations in geothermal gradient and hence in rheological behavior at scales of hundreds of km. Seismic anisotropy data substantiate anisotropic physical properties consistent at scales of tens to hundreds of km. Receiver functions imply lateral and vertical heterogeneity at scales < 10 km, which might record gradients in composition or anisotropy. Observations on naturally deformed peridotites establish that compositional heterogeneity and Crystal Preferred Orientations (CPOs) are ubiquitous from the mm to the km scales. These data allow discussing the processes that produce/destroy heterogeneity and anisotropy and constraining the time scales over which they are active. This analysis highlights: (i) the role of deformation and reactive percolation of melts and fluids in producing compositional and structural heterogeneity and the feedbacks between these processes, (ii) the weak mechanical effect of mineralogical variations, and (iii) the low volumes of fine-grained microstructures and difficulty to preserve them. In contrast, olivine CPO and the resulting anisotropy of mechanical and thermal properties are only modified by deformation. Based on this analysis, we propose that strain localization at the plate scale is, at first order, controlled by large-scale variations in thermal structure and in CPO-induced anisotropy. In cold parts of the lithospheric mantle , grain size reduction may contribute to strain localization, but the low volume of fine-grained domains limits this effect.
ISSN: 0040-1951

hal-01277174
https://hal.archives-ouvertes.fr/hal-01277174
DOI : 10.1016/j.tecto.2015.07.026

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf

Éditeur(s) : HAL CCSD Geological Society
Résumé : Gem opals from Wegel Tena, Wollo Province, Ethiopia, occur in Oligocene rhyolitic ignimbrites. They display a unique geochemistry, with some samples yielding the highest Ba concentrations ever recorded. They are generally much richer in chemical impurities than opals from other localities. For example, the sum Al+Fe or the sum Na+Mg+Ca+K+Ba are often higher. These geochemical features make them easy to distinguish from other opals worldwide. We observed strong geochemical variations and some good positive correlations in our samples, such as Al+Fe vs. Na+Mg+Ca+K+Ba, Al vs Ca, or Ba vs Ca. This shows that the crystallography of opal has controlled, at least in part, the incorporation of chemical impurities, although opal is not well-crystallized. In addition, the multimodal distributions of several chemical impurities (e.g. U vs Sr, Al vs Ca, Ba vs Ca, etc.) suggest at least two origins of silica: weathering of feldspars and weathering of volcanic glass. In addition, opals from Wegel Tena contain numerous well-preserved microscopic plant fossils. Moreover, their host rock exhibits features typical of pedogenesis (abundant clays, desiccation cracks, and grain size sorting). We propose that the opals at Wegel Tena formed during the Oligocene period when volcanic emissions stopped for a time long enough to allow weathering of ingimbrites and therefore liberation of silica. This accompanied the formation of soil and development of plant life, and some plants were trapped in opal.
ISSN: 1467-7873

hal-00767555
https://hal.archives-ouvertes.fr/hal-00767555
DOI : 10.1144/1467-7873/10-MINDEP-058

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
CMAS 3D, developed in MATLAB (R), is a program to support visualization of major element chemical data in three dimensions. Such projections are used to discuss correlations, metamorphic reactions and the chemical evolution of rocks, melts or minerals. It can also project data into 2D plots. The CMAS 3D interface makes it easy to use, and does not require any knowledge of Matlab (R) programming. CMAS 3D uses data compiled in a Microsoft Excel (TM) spreadsheet. Although useful for scientific research, the program is also a powerful tool for teaching.
ISSN: 0098-3004

hal-00413570
https://hal.archives-ouvertes.fr/hal-00413570
DOI : 10.1016/j.cageo.2008.07.002

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The New Jersey continental shelf extends 150 km off the shoreline. During IODP Expedition 313, siliciclastic deposits of late Eocene to late Pleistocene age were drilled down to 631, 669 and 755 m below seafloor at sites 27A, 28A and 29A respectively in very shallow waters (33.5 to 36 m depth). Pore water salinities display multilayered brackish-salty-brine units 10 to 170 m thick, where low-salinity water is preferentially stored in fine-grained sediments. The sharp boundaries of these buried aquifers are often marked by cemented layers a few centimetres thick. The mineralogy and scanning electron microscope observations of these layers show two phases of cementation by authigenic minerals: (1) the early carbonate cement is frequently associated with pyrite, and (2) the late silicate cement infills the residual porosity. The isotopic compositions of the carbonate cements vary widely: −2.4 < δ¹⁸O ‰ VPDB < +2.8; −15.1 < δ¹³C ‰ VPDB < +15.6. The δ¹⁸O values indicate that the carbonate cements precipitated with pore waters comprising variable mixtures of seawater and ¹⁸O-depleted fresh water originating from submarine groundwater discharge. The δ¹³C values of the carbonate cements are related to organic matter diagenesis, providing ¹³C-depleted dissolved inorganic carbon during bacterial sulphate reduction and anaerobic oxidation of methane, and ¹³C-rich dissolved inorganic carbon during methanogenesis. The diagenetic cementation processes included chemical weathering of reactive silicate minerals by the CO²-rich pore waters issued from organic matter diagenesis that released bicarbonate, cations and dissolved silica, which were further precipitated as carbonate and silicate cements. The estimated range of temperature (18±4 °C) during carbonate precipitation is consistent with carbonate cementation at moderate burial depths; however, silicate cementation occurred later during diagenesis at deeper burial depths.
ISSN: 0276-0460

hal-01559985
https://hal.archives-ouvertes.fr/hal-01559985
DOI : 10.1007/s00367-017-0506-6

Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : The Udachnaya-East pipe in Yakutia in Siberia hosts a unique dry (serpentine-free) body of hypabyssal kimberlite (<0.64wt% H2O), associated with a less dry type of kimberlite and a serpentinized kimberlitic breccia. The dry kimberlite is anomalously rich in salts (Na2O and Cl both up to 6wt%) whereas the slightly less dry and the breccia kimberlite are salt free. Yet the Udachnaya kimberlite is a group-I kimberlite, as is the archetypical kimberlite from Kimberley, South Africa. Samples were studied from the three different types of kimberlite (dry-salty, n=8, non-salty, n=5 and breccia, n=3) regarding their mineralogy, geochemistry, and more specifically their sulfur content. Our results show the salty kimberlite is unprecedentedly rich in sulfur (0.13-0.57wt%) compared to the non-salty kimberlite (0.04-0.12wt%) and the breccia (0.29-0.33wt%). In the salty kimberlite, most of the sulfur is present as sulfates (up to 97% of Stotal) and is disseminated throughout the groundmass in close association with Na-K-bearing carbonates. Sulfates occur within the crystal structure of these Na-K-bearing carbonates as the replacement of (CO3) by (SO3) groups, or as Na- and K-rich sulfates (e.g. aphtitalite, (K,Na)3Na(SO4)2). The associated sulfides are djerfisherite; also Na- and K-rich species. The close association of sulfates and carbonates in these S-rich alkaline rocks suggests that the sulfates crystallized from a mantle-derived magma, a case that has strong implication for the oxygen fugacity of kimberlite magmatism and more generally for the global S budget of the mantle.
ISSN: 0037-9409

hal-01622633
https://hal.archives-ouvertes.fr/hal-01622633
DOI : 10.1051/bsgf/2017007

Éditeur(s) : HAL CCSD
Résumé : Quasi-3D model SHORECIRC simulates circulation on simple nearshore domains. It is modified in order to handle realistic bathymetries : beaches with complex shoreline and/or emerged structures. Added improvements are validated against other models and measurements on various configurations. New SHORECIRC version is then applied to the study of the circulation dynamics of Leucate, a sandy beach of Languedoc- Roussillon (France) with crescentic bars.
Le modèle numérique de circulation quasi-tridimensionnel SHORECIRC, initialement prévu pour fonctionner sur des bathymétries simples, a été modifié afin de pouvoir prendre en compte les caractéristiques complexes des bathymétries réalistes de la zone littorale : trait de côte irrégulier et présence d'objets émergés. Les modifications apportées ont ´été validées par comparaison avec des résultats d'autres modèles numériques et avec des données mesurées sur plusieurs configurations. Enfin, le modèle modifié a été appliqué à l'étude de la dynamique de la circulation sur une plage sableuse à barres en festons (Plage de Leucate, Languedoc-Roussillon, FR).
https://tel.archives-ouvertes.fr/tel-00438713

tel-00438713
https://tel.archives-ouvertes.fr/tel-00438713
https://tel.archives-ouvertes.fr/tel-00438713/document
https://tel.archives-ouvertes.fr/tel-00438713/file/thesebujan.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Madeira Sn-Nb-Ta deposit corresponds to the albite-enriched facies of Madeira granite (Madeira Suite) that is part of a NE-SW alignment of three granitic bodies. Structural analyses suggest that the albite-enriched granite emplacement and development of related structures occurred in a different tectonic setting than earlier facies of the granitic bodies in the NE-SW alignment and that the structure was dominated by a N-NE-trending shortening related to a left-lateral motion along a NE-SW corridor within a Riedel shear. Three types of structures (flat-lying, near vertical fractures, and geodes/miaroles) concentrated the last magmatic-related fluid in the albite-enriched granite. U-Pb in situ zircon dating of the albite-enriched granite yielded an age of 1,822 ± 22 Ma. The other granitic plutons of the Madeira Suite, Água Boa granite (topaz-granite facies), and Europa per-alkaline granite formed at 1,825 ± 14 Ma, 1,831± 11 Ma, and 1,839 ± 10 Ma, respectively. The granite bodies of the Madeira Suite occur in an area occupied by a cauldron complex composed of volcanic sequences (Iricoumé Group) and associated A-type granites (Mapuera Suite), and their formation was controlled by the reactivation of the cauldron structures and the pre-existing structures. The gap between the cauldron complex and the Madeira Suite is no greater than 35 Ma. The geological evolution was reanalyzed from the perspective of an entire extensional environment where three successive episodes of A-type magmatism and basin formation (Urupi Formation) occurred. The data and interpretations of this work imply crucial constraints on the petrologic models proposed for the albite-enriched granite and, consequently, on the genesis of the Madeira deposit
ISSN: 0301-9268

insu-00939888
https://hal-insu.archives-ouvertes.fr/insu-00939888
https://hal-insu.archives-ouvertes.fr/insu-00939888/document
https://hal-insu.archives-ouvertes.fr/insu-00939888/file/BastosNeto-PrecambrianResearch-2014.pdf
DOI : 10.1016/j.precamres.2013.12.021

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Expeditions 304 and 305 of the Integrated Ocean Drilling Program cored and logged a 1.4 km section of the domal core of Atlantis Massif. Postdrilling research results summarized here constrain the structure and lithology of the Central Dome of this oceanic core complex. The dominantly gabbroic sequence recovered contrasts with predrilling predictions; application of the ground truth in subsequent geophysical processing has produced self-consistent models for the Central Dome. The presence of many thin interfingered petrologic units indicates that the intrusions forming the domal core were emplaced over a minimum of 100-220 kyr, and not as a single magma pulse. Isotopic and mineralogical alteration is intense in the upper 100 m but decreases in intensity with depth. Below 800 m, alteration is restricted to narrow zones surrounding faults, veins, igneous contacts, and to an interval of locally intense serpentinization in olivine-rich troctolite. Hydration of the lithosphere occurred over the complete range of temperature conditions from granulite to zeolite facies, but was predominantly in the amphibolite and greenschist range. Deformation of the sequence was remarkably localized, despite paleomagnetic indications that the dome has undergone at least 45 degrees rotation, presumably during unroofing via detachment faulting. Both the deformation pattern and the lithology contrast with what is known from seafloor studies on the adjacent Southern Ridge of the massif. There, the detachment capping the domal core deformed a 100 m thick zone and serpentinized peridotite comprises similar to 70% of recovered samples. We develop a working model of the evolution of Atlantis Massif over the past 2 Myr, outlining several stages that could explain the observed similarities and differences between the Central Dome and the Southern Ridge.
ISSN: 0148-0227

hal-00617528
https://hal.archives-ouvertes.fr/hal-00617528
https://hal.archives-ouvertes.fr/hal-00617528/document
https://hal.archives-ouvertes.fr/hal-00617528/file/2010JB007931.pdf
DOI : 10.1029/2010JB007931

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
CK chondrites are highly oxidized meteorites containing abundant magnetite and trace amounts of Fe,Ni metal. Although the group is predominately composed of equilibrated meteorites (types 4-6), in recent years a significant number of new samples have been classified as being either CK3 or CK3-anomalous. These unequilibrated CKs often display a close affinity with members of the CV oxidized subgroup. CKs and CVs (oxidized subgroup) may therefore form a continuum and by implication could be derived from a single common parent body. To investigate the relationship between these two groups a detailed study of the oxygen isotope composition, opaque mineralogy and major and trace element geochemistry of a suite of CV and CK chondrites has been undertaken. The results of oxygen isotope analysis confirm the close affinity between CV and CK chondrites, while excluding the possibility of a linkage between the CO and CK groups. Magnetites in both CV and CK chondrites show significant compositional similarities, but high Ti contents are a diagnostic feature of the latter group. The results of major and trace element analysis demonstrate that both CV and CK chondrites show overlapping variation. Supporting evidence for a single common source for both groups comes from their similar cosmic-ray exposure age distributions. Recent reflectance spectral analysis is consistent with both the CVs and CKs being derived from Eos family asteroids, which are believed to have formed by the catastrophic disruption of a single large asteroid. Thus, a range of evidence appears to be consistent with CV and CK chondrites representing samples from a single thermally stratified parent body. In view of the close similarity between CV and CK chondrites some modification of the present classification scheme may be warranted, possibly involving integration of the two groups. One means of achieving this would be to reassigned CK chondrites to a subgroup of the oxidized CVs. It is recognized that a full evaluation of this proposal may require further study of the still poorly understood CK3 chondrites.
ISSN: 0016-7037

hal-00474633
https://hal.archives-ouvertes.fr/hal-00474633
DOI : 10.1016/j.gca.2009.11.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Recent sedimentary facies and processes along the offshore slope of east Taiwan are investigated using a large set of geophysical and sedimentological data. The Taiwan orogen is often considered as one of the most tectonically active regions in the world and also suffers important climatic activity with an average of four typhoons per year. We have mapped in details the morphosedimentary features and characterized the sedimentary facies along offshore eastern Taiwan. There, we show that the slope is driven by a variety of erosional processes from mass wasting to turbidity current. Mass movements such as slides or mass transport deposits (MTDs) are ubiquitous and affect the whole east coast off Taiwan. Detailed core investigations, such as grain size analysis, chemical and mineralogical composition, revealed that turbidite facies range from thin fine-grained turbidites to thick massive turbidite facies. The detailed analysis of turbidite beds allow us to discuss the controlling factors of turbidity current generation. Turbidity currents represent an important sedimentary process that governs the slope morphology off east Taiwan. Triggering mechanisms likely range from slope instabilities related to earthquakes shaking to failure relative to climatic-controlled pulses of sediment supply. We propose that at least two end-members are characteristics in our turbidite records in term of controlling factor:1) Turbidity currents likely generated by tectonic activity and earthquakes shaking in particular; and2) Turbidity currents likely generated by climatic activity such as typhoon-induced floods.
ISSN: 0025-3227

hal-01277768
https://hal.archives-ouvertes.fr/hal-01277768
DOI : 10.1016/j.margeo.2015.05.013

Éditeur(s) : HAL CCSD
Résumé : International audience
We present a chronological (K-Ar), petrologic and geochemical study (major and trace elements, Sr-Nd isotopes) of Middle Miocene (ca. 16-14 Ma) calc-alkaline rocks (basalts to andesites) extruded in the present-day back-arc region of Central Patagonia (Zeballos Volcanic Sequence (ZVS), 47 S). This magmatism started shortly after mafic plutonism ceased in the arc region (ca. 16 Ma, 200 km west), and ended ca. 2 My before the onset of voluminous slab tear-related back-arc alkaline basaltic magmatism (ca. 12 to Pliocene). The studied calc-alkaline rocks have a typical subduction-related signature (high LILE/HFSE ratios, depletion in Nb, Ta and Ti; Ba/La >20; Ta/Hf <1.5; (Sr-87/Sr-86)(o)=0.70366-0.70402, epsilon(Nd)=+0.1-+3.8). Major and trace elements contents are consistent with their evolution by closed system fractional crystallization of a presumed parental liquid similar in composition to the most basic rock of the suite. Moreover, a strong subducted sediment imprint is recognized (increasing Th/HFSE and decreasing Ce/Pb during differentiation). However, these rocks show striking similarities with volcanic complexes emplaced above areas where a gently dipping slab occurs (high K contents; similar LREE/HREE, Nb/Zr, Ba/Nb; Th/Hf; Th/Ta, Ta/Hf<0.3), particularly the present-day Andean flat-slab region and the Neuquen Basin during the Late Miocene. A comprehensive tectono-magmatic model is here presented to explain the generation and extrusion of these calc-alkaline magmas during the Middle Miocene. The development of a transient low-angle subduction and the resulting eastward migration of the volcanic front are then proposed. Mixing between stored remnants of calc-alkaline magmatism and later primitive alkaline melts is envisioned as the most likely process accounting for the transitional signature (i.e., intermediate between calc-alkaline and alkaline, La/Nb >I; TiO2 <2 wt%) of some basalts extruded synchronously with genuine alkaline lavas in the Neogene Patagonian Plateau Lavas province.
Volcanismo calcoalcalino durante el Mioceno Medio en Patogonia Central (47°S): petrogenesis e implicaciones en la dinamica de placas. En este trabajo se presenta un estudio cronologico (K-Ar), petrologico y geoquimico (elementos mayores y trazas, isotopos de Sr-Nd) de rocas calcoalcalinas (basaltos a andesitas) del Mioceno Medio (16-14 Ma) que ocurren en una posicion de trasarco en Patagonia Central (47°S; Secuencia Volcanica Zeballos, SVZ). Este magmatismo comenzo poco despees de que el plutonismo mafico cesara en la region bajo el arco (ca. 16 Ma, 200 km al oeste), y termino ca. 2 My antes del comienzo de un voluminoso evento magmatico basaltico alcalino desarrollado en el trasarco, relacionado con ventanas astenosfericas, que continuo hasta el Pleistoceno. Las rocas calcoalcalinas estudiadas tienen una quimica tipicamente relacionada con procesos de subduccion (altas razones LILE/HFSE, empobrecimientos en Nb, Ta y Ti; Ba/La>20; Ta/Hf l,5; (87Sr/86Sr)0=0,70366-0,70402, End~O,1±3,8); y sus contenidos de elementos mayores y trazas son consistentes con una evolucion por cristalizacion fraccionada, en un sistema cerrado, desde un liquido parental de composicion similar a la de la roca mas basica del conjunto analizado. Se reconoce, ademas, la influencia de sedimentos subductados en la composicion de estos magmas (aumento de la razon Tb/HFSE y disminucion de la razon Ce/Pb durante la diferenciacion). Sin embargo, estas rocas muestran importantes similitudes composicionales con las de complejos volcanicos emplazados sobre areas donde ocurre subduccion de bajo angulo (altos contenidos de K, similares razones LREF/HREE, Nb/Zr, Ba/Nb; TblHf; TblTa, Ta/Hf O,3), particularmente rocas de la actual region de subduccion plana en Chile central-Argentina y de la cuenca de Neuquen durante el Mioceno Superior. Se propone aqui un modelo tectono-magmatico que explica la generacion y extension de magmas calcoalcalinos en una posicion de trasarco durante el Mioceno Medio en Patagonia mediante el desarrollo de un fenomeno transiente de subduccion de bajo angulo y el consiguiente desplazamiento hacia el este del frente volcanico. Ademas, la mezcla entre remanentes de este magmatismo calcoalcalino almacenados en la corteza y fundidos alcalinos posteriores, provenientes de la astenosfera, se presenta como el proceso responsable de la generacion de la signatura transicional (i.e., intermedia entre calcoalcalina y alcalina, La/Nb>1; TiO2 2 wt%) reconocida en algunos basaltos que ocurren contemporaneamente con otros puramente alcalinos en la provincia de las Lavas Neogenas de Plateau de la Patagonia.
ANDEAN GEOLOGY

insu-00561888
https://hal-insu.archives-ouvertes.fr/insu-00561888
DOI : 10.5027/andgeo2010-678

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
The effect of trace concentrations of Ti on the rate and mechanism of hydrogen diffusion in pure forsterite was investigated experimentally. Forsterite doped with 350–400 ppm Ti (predominantly octahedral Ti3+, minor tetrahedral Ti4+) was prepared by diffusing Ti into pure synthetic forsterite at high temperature (1500 °C), very low oxygen fugacity (~QFM-5) at atmospheric pressure. The Ti-doped forsterite was then diffusively hydroxylated in a piston-cylinder apparatus at much lower temperatures (650–1000 °C) and higher oxygen fugacities, at 1.5–2.5 GPa, with chemical activities buffered by forsterite-enstatite or forsterite-periclase and partial pressure of H2O equal to total pressure. This produced hydrogen concentration-distance profiles of several hundred micrometers in length. Diffusion of hydrogen through the Ti-doped forsterite, even at very high Embedded Image , does not lead to redox re-equilibration of the high Ti3+/ΣTi ratio set during the synthesis of the starting material at extremely reducing conditions—the metastable point defects are partially preserved.Three main hydroxylated point defects are observed; hydroxyl is associated with Ti4+ (titano-clinohumite point defects), Ti3+ (and possibly other trivalent cations), and M-site vacancies. Concentration-distance profiles represent an interplay between diffusion and reaction (i.e., site rearrangement) to form the observed point defects. In all experiments, the concentration-distance profiles of the hydroxylated Ti defects coincide with the concentration-distance profiles of the M-site vacancy substitution, with the same crystallographic anisotropy. This suggests that the macroscopic movement of hydrogen through the crystal is due to one diffusion mechanism (the diffusion of hydroxylated M-site vacancies). The net H diffusion coefficient [logD(ΣH)], between 650–1000 °C, is Embedded Image where the values of logD0(ΣH) parallel to [100] and [001] directions are −3.0 ± 0.4 and −2.2 ± 0.4, respectively; diffusion is therefore around one order of magnitude faster along the c axis than along the a axis. The diffusion of hydrogen is slightly faster in Ti-doped forsterite than in pure forsterite. There is no effect of chemical activity or oxygen fugacity on the rate of diffusion. Hydrogen diffusion profiles represent a complex interplay between the movement of H through the crystal lattice and point-defect reactions to maintain charge balance.
ISSN: 0003-004X

hal-01467402
https://hal.archives-ouvertes.fr/hal-01467402
DOI : 10.2138/am-2016-55681571

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
We report trace element analyses by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) of metal grains from nine different CR chondrites, distinguishing grains from chondrule interior ("interior grains"), chondrule surficial shells ("margin grains"), and the matrix ("isolated grains"). Save for a few anomalous grains, Ninormalized trace element patterns are similar for all three petrographic settings, with largely unfractionated refractory siderophile elements and depleted volatile Au, Cu, Ag, S. All three types of grains are interpreted to derive from a common precursor approximated by the least-melted, fine-grained objects in CR chondrites. This also excludes recondensation of metal vapor as the origin of the bulk of margin grains. The metal precursors were presumably formed by incomplete condensation, with evidence for high-temperature isolation of refractory platinum-group-element (PGE)-rich condensates before mixing with lower temperature PGE-depleted condensates. The rounded shape of the Ni-rich, interior grains shows that they were molten and that they equilibrated with silicates upon slow cooling (1-100 K h 1), largely by oxidation/evaporation of Fe, hence their high Pd content, for example. We propose that Ni-poorer, amoeboid margin grains, often included in the pyroxene-rich periphery common to type I chondrules, result from less intense processing of a rim accreted onto the chondrule subsequent to the melting event recorded by the interior grains. This means either that there were two separate heating events, which formed olivine/ interior grains and pyroxene/margin grains, respectively, between which dust was accreted around the chondrule, or that there was a single high-temperature event, of which the chondrule margin records a late "quenching phase," in which case dust accreted onto chondrules while they were molten. In the latter case, high dust concentrations in the chondrule-forming region (at least three orders of magnitude above minimum mass solar nebula models) are indicated.
ISSN: 1086-9379

hal-01003975
https://hal.archives-ouvertes.fr/hal-01003975
DOI : 10.1111/maps.12212

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Synkinematic phyllosilicates in fault zones can be used to deduce the deformation mechanisms and the conditions of fault activity, as their chemical composition, crystal structure and texture can record the different stages of deformation and fluid-rock interactions. The Pic de Port Vieux, a second-order thrust related to the major Gavarnie thrust in the southern central part of the Pyrenees Axial Zone, juxtaposes Triassic pelites of the hanging wall and Cretaceous limestones of the footwall. In order to investigate the mineralogical and geochemical changes and constrain the deformation conditions of thrusting, characterization of phyllosilicates was performed along a transect in the fault hanging wall pelites. The Triassic pelites are mainly composed of quartz, calcite, phyllosilicates (chlorite and K-white mica) and ± hematite. The core fault zone thickness is estimated to be about one meter of intensively foliated green pelites, whereas the damage zone is composed of several meters of red pelites. XRD data demonstrated that the difference in color is related to hematite which is only present in the damage zone. Phyllosilicates of the damage zone are mainly inherited/diagenetic K-white mica and chlorite. In the core zone, newly formed chlorite is abundant and preferentially located in veins. It is enriched in Fe compared to the chlorite of the red pelites. The well-defined foliation in the core zone is overlaid by preferentially oriented muscovite grains which have homogeneous compositions, with less Na and relatively more Fe than mica from the red pelites. Newly formed chlorite and muscovite in the core zone are synkinematic to the fault activity. They are both related to deformation processes and fluid rock interactions. Kübler index measurements and chlorite thermometry show that synkinematic phyllosilicates have registered a temperature of 270°C ± 23°C for the damage zone and 285°C ± 28°C for the core zone which are corresponding to lower-anchizone/epizone grade conditions. Numerical modelling with the geochemical modelling program PhreeqC was performed to determine the favorable conditions for the mineralogical change between red and green pelites. It suggests that the main critical parameter favoring hematite dissolution and chlorite precipitation in the core zone, is the redox conditions. According to the model, the chemical changes in the core zone occurred due to interactions with highly reductive fluids. In addition, the hematite dissolution maybe the source of iron for newly formed phyllosilicates in the core zone that are more iron rich compared to those from the red pelites.
ISSN: 0169-1317

hal-01536006
https://hal.archives-ouvertes.fr/hal-01536006
DOI : 10.1016/j.clay.2017.05.008

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
IODP Expedition 324 cored igneous rocks from Shatsky Rise, an oceanic plateau in the northwest Pacific Ocean that formed mainly during late Jurassic and Early Cretaceous times. We selected 60 samples from 3 different holes for Thellier-Thellier palaeointensity determinations. Induced and remanent magnetization curves measured at low- and high-temperature suggest a diverse and complex magnetic mineralogy, with large variations in Ti content and oxidation state. Hysteresis and FORC measurements show that most samples contain singledomain magnetic grains. After carrying out the palaeointensity determinations, only 9 samples satisfied all reliability criteria. These gave palaeointensity values between 16.5 and 21.5 μT, which correspond to average VDM values of (4.9 ± 0.2) × 1022 Am2 for an estimated age of 140-142 Ma. This value is lower than that for the recent field, which agrees with the hypothesis of a Mesozoic Dipole Low.
ISSN: 0956-540X

hal-00795491
https://hal.archives-ouvertes.fr/hal-00795491
DOI : 10.1093/gji/ggs100