Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Numerical models show that small-scale convection (SSC) occurring atop a mantle plume is a plausible mechanism to rejuvenate the lithosphere. The triggering of SSC depends on the density contrast and on the rheology of the unstable layer underlying the stagnant upper part of the thermal boundary layer (TBL). Partial melting may change both properties. We analyze, using 2-D numerical simulations, how partial melting influences the dynamics of time-dependent SSC instabilities and the resulting thermo-mechanical rejuvenation of an oceanic plate moving atop of a plume. Our simulations show a complex behavior, with acceleration, no change, or delay of the SSC onset, due to competing effects of the latent heat of partial melting, which cools the plume material, and of the buoyancy increase associated with both melt retention and depletion of residue following melt extraction. The melt-induced viscosity reduction is too localized to affect significantly SSC dynamics. Faster SSC triggering is promoted for low melting degrees (low plume temperature anomalies, thick lithosphere, or fast moving plates), which limit both the temperature reduction due to latent heat of melting and the accumulation of depleted buoyant residue in the upper part of the unstable layer. In contrast, high partial melting degrees lead to a strong temperate decrease due to latent heat of melting and development of a thick depleted layer within the sublithospheric convecting layer, which delay the development of gravitational instabilities. Despite differences in SSC dynamics, the thinning of the lithosphere is not significantly enhanced relatively to simulations that neglect partial melting.
ISSN: 1525-2027

hal-01277175
https://hal.archives-ouvertes.fr/hal-01277175
DOI : 10.1002/2015GC005967

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Structural controls are critical during magmatic-to-hydrothermal transition in the formation of intrusion-related gold deposits. They may explain why only some parts of intrusions are mineralized and why only very few intrusions host large deposits. Moreover, most of these gold deposits postdate peak regional metamorphism and were formed in zones of relatively low strain. Indeed, the efficiency of structural gold traps is highest along favourably oriented intrusion/host-rock contacts where mechanical instability maintains high permeability in the cracked thermal aureole. This may be reinforced by melt injections from an underlying root zone. We present a structural analysis of the deformation features of a granite-pluton roof; large-scale dykes and a network of gold veins are intensively developed in this roof, recording a succession of mechanical instabilities. Our gravity survey underlines the presence of a pluton feeder zone located just beneath the mineralized network. It is argued that interferences between regional stress and melt injection in the feeder zone favoured the development of the network by strain located close to the granite roof. This stresses the role of mechanical instabilities triggered by the combined effects of regional stress and melt dynamics in determining the location and size of this type of gold deposit.
ISSN: 0191-8141

insu-00914780
https://hal-insu.archives-ouvertes.fr/insu-00914780
https://hal-insu.archives-ouvertes.fr/insu-00914780/document
https://hal-insu.archives-ouvertes.fr/insu-00914780/file/manuscript.pdf
DOI : 10.1016/j.jsg.2013.11.006

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
The premature loss of ovarian function may have physical and psychological consequences. A better understanding of its mechanism is therefore needed. Because they are affecting the oocyte quality, the decline of the ovarian reserve and high maternal age are implicated in many defects leading to chromosomal defects, modifications of gene expression or alterations of the mitochondrial pattern of the oocyte. However, cellular therapies such as ovarian follicle activation or isolation of ovarian stem cells are promising treatments of ovarian failure
Le diagnostic d’insuffisance ovarienne chez une femme ayant un projet d’enfanter aura des conséquences non seulement physiques mais également psychologiques. L’optimisation des stratégies de prise en charge thérapeutique nécessite une meilleure compréhension des mécanismes de survenue de cette défaillance. Les mécanismes responsables de la constitution et du maintien de la réserve ovarienne commencent à être élucidés. Avec le déclin de la réserve ovarienne, la qualité ovocytaire diminue, accentuant la baisse de la fertilité associée à l’âge maternel. Les ovocytes et les embryons résultant de patientes âgées présentent des taux d’aneuploïdies élevés, liés à des défauts de cohésion chromosomique et d’instabilité du fuseau méiotique, diminution de la capacité de réparation de l’ADN, altération de l’expression des gènes ou à une altération du fonctionnement mitochondrial. Avec la possibilité d’activer in vitro la folliculogenèse et l’isolement de cellules souches ovariennes, plusieurs pistes de thérapie cellulaire commencent à se développer et semblent très prometteuses.
ISSN: 1297-9589

hal-01231432
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01231432
DOI : 10.1016/j.gyobfe.2015.10.008
PUBMED : 26597936

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : Extension fractures of two types defined by the mean stress σ were generated in a synthetic rock analogue material. When σ is very small, the fractures are mode I cracks with smooth surfaces. At higher σ, these surfaces have plumose topography, with the amplitude increasing with σ. Both SEM observations and mechanical measurements show that fractures/discontinuities in the latter case are initiated as dilatancy localization bands. They form under tensile or slightly compressive normal stress and can be seen as running constitutive instabilities. The similarity between the plumose fractography of the experimental fractures and natural joints suggests similarity in the formation mechanism.
ISSN: 1631-0721

hal-00585886
https://hal.archives-ouvertes.fr/hal-00585886
DOI : 10.1016/j.crme.2011.01.002

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Les « printemps » arabo-africains se suivent et ne se ressemblent pas, aux  « printemps » doux et pacifiques succèdent des « printemps » chauds et sanguinaires. Un « printemps » en chasse un autre, mais le bilan est mitigé, l’avenir encore incertain et les acquis réversibles. Indéniablement, ils n’ont pas encore dit leur dernier mot. De nouvelles raisons de préoccupations voient le jour, de nature différente ; elles ont pour nom : instabilité, intolérance, chaos, paralysie de l’État et ses institutions, menace qui plane sur le droit des femmes, des minorités de tous ordres, sur la liberté de conscience et le droit à la différence. Mais aussi de nouvelles raisons d’espérer des lendemains meilleurs.L'Afrique n’en est pas à un « printemps » près, mais les retombées sont toujours restées en deçà des attentes. La mise en place laborieuse d'un système panafricain des droits de l’homme et des peuples fut saluée, à juste titre, comme un évènement majeur et un « printemps » avant  la  lettre.L'article retrace toutes les étapes et péripéties de cette mise en place, le contexte, les tenants  et  les aboutissants de l'élaboration de la Charte africaine des droits de l'homme et des peuples qui en constitue le substratum. Il met en exergue ses spécificités, ses originalités, les mécanismes prévus et les organes érigés (Commission et Cour Africaine des Droits de l'Homme et des Peuples) pour assurer l'application et la promotion des  droits de l'homme et des peuples. À beaucoup d’égards, la Charte innove courageusement et originalement par  rapport à ses illustres devancières.Dans son intitulé d'abord : il s'agit d'une Charte et non d’une Déclaration. Ensuite, les droits de l’homme sont couplés aux droits des peuples et hissés au même niveau d'importance et d'impérativité, sinon plus. Enfin, la Charte ne reconnait pas seulement des droits mais elle édicte des devoirs (envers la famille, la communauté, l'État, l'Afrique, l’environnement, etc.) et fait de l'accomplissement de ceux-ci une condition de la jouissance de ceux-là. Deux décennies de recul et seulement 12 affaires traitées (sur seulement 24 qui lui sont parvenus), on peut dire que cette dernière est loin d'avoir atteint sa vitesse de croisière et mérité tant d'espoir placé en elle. De là à jeter le bébé avec l'eau du  bain, occulter tous les bienfaits d'un système qui est loin d'avoir démérité, il n'y a qu'un pas que ne franchirons guère.
The Arab-African springs follow one after the other but are not alike, soft and peaceful springs are succeeded by hot and bloodthirsty springs. One spring expels another one, but the situation s balance sheet is mixed, the future is still uncertain and the experiences are reversible. Undeniably, they didn't say their last word. New reasons of preoccupation are born, made of different nature : they are named : instability, intolerance, chaos, paralysis of the state and its institutions, threat to the women rights, minorities of all kinds, the conscience freedom and the rights to difference ; but also new reasons to hope for a better tomorrow. Africa is not at its last "spring" but the rewards remained always below expectations.The laborious Implementation of a Pan-African system of human rights and peoples was hailed, deservedly, as a major event and a "spring" far ahead of its time. The article in attached outlines all the steps and vicissitudes of this implementation rerelease the context, the end and results of the elaboration of human and people’s rights African charter which constitutes the substratum. It highlights its specificities, its originalities, the planed mechanisms and high instruments (Commission and the African Court of Human and Peoples' Rights) to ensure the application and the promotion of human and people’s rights.In many respects, the Charter innovates bravely and originally compared to its illustrious predecessors.At first in its title: it is matter of a charter and not a declaration. Then, human rights are closely connected to the people’s rights and hoisted at the same level of importance and imperativeness or more. Finally, the Charter does not only recognizes rights but it promulgates duties (to family, community, the state, Africa, the environment, etc.) and makes of the fulfillment of these a condition of enjoyment of those. Two decades backout, and only 12 cases treated (from only 24 have reached) later, in front of the Court, we can say that it is far from having reached its cruising speed and deserved so much hope placed in it.From there to throw the baby out with the bath water, hide all the benefits of a system which is far from being unworthy, there is only one step which shall exceed hardly.
Afrique

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.6735
http://journals.openedition.org/etudescaribeennes/6735

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Recent sedimentary facies and processes along the offshore slope of east Taiwan are investigated using a large set of geophysical and sedimentological data. The Taiwan orogen is often considered as one of the most tectonically active regions in the world and also suffers important climatic activity with an average of four typhoons per year. We have mapped in details the morphosedimentary features and characterized the sedimentary facies along offshore eastern Taiwan. There, we show that the slope is driven by a variety of erosional processes from mass wasting to turbidity current. Mass movements such as slides or mass transport deposits (MTDs) are ubiquitous and affect the whole east coast off Taiwan. Detailed core investigations, such as grain size analysis, chemical and mineralogical composition, revealed that turbidite facies range from thin fine-grained turbidites to thick massive turbidite facies. The detailed analysis of turbidite beds allow us to discuss the controlling factors of turbidity current generation. Turbidity currents represent an important sedimentary process that governs the slope morphology off east Taiwan. Triggering mechanisms likely range from slope instabilities related to earthquakes shaking to failure relative to climatic-controlled pulses of sediment supply. We propose that at least two end-members are characteristics in our turbidite records in term of controlling factor:1) Turbidity currents likely generated by tectonic activity and earthquakes shaking in particular; and2) Turbidity currents likely generated by climatic activity such as typhoon-induced floods.
ISSN: 0025-3227

hal-01277768
https://hal.archives-ouvertes.fr/hal-01277768
DOI : 10.1016/j.margeo.2015.05.013

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Large-scale periodic undulations within the oceanic and continental lithospheres revealed by a number of observations, are often treated as compressive instabilities, i.e. lithospheric buckling or folding. These undulations are normally associated with intensive faulting, which raises questions on the role of faulting in the folding process, and even on the possibility of folding in highly faulted media. In this study, we demonstrate that folding can "survive" faulting and that both processes may develop concurrently, so that faulting may serve as a mechanism of folding in the brittle domain. We support this hypothesis by direct numerical modeling. The results are compared with the data on three most prominent and well-known cases of the oceanic and continental folding-like deformation ("Indian Ocean" type, "Western Gobi (central Asia)" type and "Central Australian" type). We demonstrate that under reasonable tectonic stresses, folds can develop from faults cutting through the brittle parts of the lithosphere. The predicted wavelengths and nite growth rates are in agreement with the observations. We also show that within a continental lithosphere with thermotectonic age greater than 400 My, either a bi-harmonic mode (two superimposed wavelengths, crustal and mantle one) or a coupled mode (mono-layer deformation) of inelastic folding can develop, depending on the strength and thickness of the lower crust.
ISSN: 0094-8276

ird-00388016
http://hal.ird.fr/ird-00388016
http://hal.ird.fr/ird-00388016/document
http://hal.ird.fr/ird-00388016/file/fig3.pdf
http://hal.ird.fr/ird-00388016/file/fig1.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Fractures or discontinuities perpendicular to the least stress σ3 were generated in a synthetic rock analogue (granular, frictional, cohesive, and dilatant) material in axisymmetric extension tests. These fractures are of two types defined by the mean stress σ. When σ is very small, the fractures form through the mode I cracking at tensile σ3 equal to the material tensile strength. The fracture walls have smooth surfaces. At higher σ, these surfaces become rougher, with the topography features forming faint or delicate plumose patterns. The amplitude of the plumose topography increases with σ. The axial stress σ3 at fracturing reduces in magnitude and changes in sign with the σ increase. Thus σ3 orthogonal discontinuities can form at compressive σ3. SEM observations show that these discontinuities are deformation localization bands where the material is characterized by the heterogeneous decohesion and volume and porosity increase due to dilatancy. The band thickness is several grain sizes. At formation, the bands are not opened, so they are not mode I fractures. They become fractures with plumose fractography after the separation of the sample parts along the band. The formation mechanism of these discontinuities or fractures is not completely clear, but it is suggested that it represents a running constitutive instability in the form of dilatancy banding (with further σ increase the bands become inclined to σ1, i.e., shear). The similarity between the experimentally generated plumose surface fractures and natural joints is discussed, and it is suggested that they can be formed as propagating constitutive instabilities.
ISSN: 0148-0227

hal-00585846
https://hal.archives-ouvertes.fr/hal-00585846
DOI : 10.1029/2010JB008104

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Orogenic wedges locally present chaotic tectonostratigraphic units that contain exotic blocks of various size, origin, age and lithology, embedded in a sedimentary matrix. The occurrence of ophiolitic blocks, sometimes huge, in such “mélanges” raises questions on (i) the mechanisms responsible for the incorporation of oceanic basement rocks into an accretionary wedge and (ii) the mechanisms allowing exhumation and redeposition of these exotic elements in “mélanges” during wedge growth.To address these questions, we present the results of a series of analogue experiments performed to characterize the processes and parameters responsible for accretion, exhumation and tectonosedimentary reworking of oceanic basement lithospheric fragments in an accretionary wedge.The experimental setup is designed to simulate the interaction between tectonics, erosion and sedimentation. Different configurations are applied to study the impact of various parameters, such as irregular oceanic floor due to structural inheritance, or the presence of layers with contrasted rheology that can affect deformation partitioning in the wedge (frontal accretion vs basal accretion) influencing its growth. Image correlation technique allows extracting instantaneous velocity field, and tracking of passive particles. By retrieving the particle paths determined from models, the pressure-temperature path of mélange units or elementary blocks can be discussed. The experimental results are then compared with observations from ophiolite-bearing mélanges in Taiwan (Lichi and Kenting mélanges) and Raman spectroscopy of carbonaceous material (RSCM) Thermometry data on rocks from the northern Apennines (Casanova mélange). A geological scenario is proposed following basic observations. The tectonic evolution of the retroside of doubly vergent accretionary wedges is mainly controlled by backthrusting and backfolding. The retro wedge is characterized by steep slopes that are prone to gravitational instabilities. It triggers submarine landslides inducing huge mass transfers. This erosion combined with backthrusting could favour exhumation of the ophiolitic fragments formerly accreted at the base of the wedge along the rough seafloor-sediments interface. Such an exhumed material can be reworked and deposited as debris- flows in proximal basins located at the foot of the retrowedge slope forming a tectono-sedimentary mélange. These syntectonic basins are continuously deformed and involved in prograding backthrusting-induced deformation.
ISSN: 0264-3707

hal-01395127
https://hal.archives-ouvertes.fr/hal-01395127
DOI : 10.1016/j.jog.2016.05.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : Obduction processes, though spectacular (dense oceanic ophiolites are emplaced on top of light, continental rocks along thousands of km), have been little elucidated since the advent of plate tectonics. Based on convergence velocities and blueschist formation, we show that the two recent large-scale, Upper Jurassic and Upper Cretaceous obductions coincided with periods during which velocities increased abruptly and more than doubled. The latter obduction also modified the interplate coupling across adjacent subduction zones. We critically propose a mechanism in which large-scale obductions are triggered by intraplate instabilities resulting from sharp plate accelerations, possibly in response to superplume events
ISSN: 0012-821X

hal-00407960
https://hal.archives-ouvertes.fr/hal-00407960
DOI : 10.1016/j.epsl.2007.04.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep-seated gravitational spreading (DSGS) affects the slopes of formerly glaciated mountain ridges. On Mars, DSGS has played a key role in shaping the landforms of the giant Valles Marineris troughs. Though less spectacular, DSGS is common in terrestrial orogens, where understanding its mechanics is critical in the light of the ongoing climate change because it is a potential source of catastrophic landslides in deglaciated valleys. We conducted parametric numerical studies in order to identify important factors responsible for DSGS initiation. DSGS models are computed using an elastoviscoplastic finite element code. Using ADELI's software, we reproduce topographic ridge spreading under the effect of valley unloading. Two types of spreading topographic ridges are investigated, homogeneous or with horizontal rheological layering. We find that gravitational instabilities are enhanced by high slopes, which increase gravitational stress, and low friction and cohesion, which decrease yield stress. In the unlayered ridge, instability is triggered by glacial unloading with plastic strain concentration inside the ridge and at the base of the high slopes. Vertical fractures develop in the upper part of the slope, potentially leading to fault scarps. Ridge homogeneity promotes a deformation mode controlled by uphill-facing normal faulting and basal bulging. In the second case, the ridge encompasses horizontal geological discontinuities that induce rock mass anisotropy. Discontinuity located at the base of the slope accumulates plastic strain, leading to the formation of a sliding plane evolving into a landslide. The presence of a weak layer at ridge base therefore promotes another slope deformation mode ending up with catastrophic failure. Mechanical conditions and slope height being equal, these conclusions can probably be extrapolated to Earth. Compared with Mars, DSGS on Earth is inhibited because terrestrial topographic gradients are lower than in Valles Marineris, an effect counterbalanced by increased gravitational stress, where the intensity of deformation is enhanced because of the Earth gravity potential.
ISSN: 0169-555X

hal-01420007
https://hal.archives-ouvertes.fr/hal-01420007
DOI : 10.1016/j.geomorph.2016.06.011

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
This study describes a laboratory experiment on rip current circulations over a moveable bed. Rip current characteristics over eight contrasting nature-like beach morphologies are investigated. The seabed varied from reasonably alongshore uniform to strongly alongshore nonuniform with crescentic patterns and bar-rip morphologies, representative of a full morphological down-state sequence. The same offshore shore-normal waves were generated by the wavemaker for the eight situations with the same mean water level to study the sensitivity of rip current characteristics as a function of the beach morphology only. In each case, a 30 to 60 min video run was used to track a large number of drifters released within the surf zone. Results show the presence of classic rip current patterns with counterrotating cells and a relatively narrow offshore-directed jet varying from shore-normal to strongly skewed. Wave-driven circulations were strongly unstable. Computed standard deviations of flow intensity and direction provide high-resolution information on the spatial variability of rip current instabilities. Highly pulsating and weakly directionally variable offshore-directed flow is observed in the rip neck for well-developed bar-rip morphologies that turns into a weakly pulsating and highly directional variable rip current flow with decreasing beach alongshore nonuniformity. Proposing a definition of rip current intensity based on the rip current circulation geometry, rip current intensity was found to linearly increase with increasing measure of beach alongshore nonuniformity within both the low-energy and moderate-energy rip current regimes. To date, our laboratory experiment provides the first extensive quantitative rip current information during a full down-state sequence for a given wave condition.
ISSN: 0148-0227

hal-00602920
https://hal.archives-ouvertes.fr/hal-00602920
DOI : 10.1029/2010JC006343

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present comparative field studies in folded areas (Southern France. Moroccan Western Atlas and Abruzzo, Italy) giving new insights into fracture distribution within folded rocks of the shallow brittle crust. We show that the curvature in folds formed in brittle mechanical units is usually accommodated by multiple "dip-domain boundaries" (appearing as curvature discontinuities at fold scale) corresponding to relatively narrow and dense fracture zones, striking parallel or slightly oblique to the fold axis. They separate "dip-domains" where curvature is absent or moderate. It is shown that the dip-domain boundaries (which are obvious in the case of kink folds or box-fold anticlines) are currently present as multiple subtle hinges even when the curvature appears continuous at first sight. The nature of dip-domain boundaries is studied, they often cut through the whole thickness of the mechanical units Their internal structure varies, and a non-exhaustive typology is proposed For each type, an interpretative kinematic scenario shows how the dip-domain boundaries could initiate and develop. We suggest two kinds of origins (1) they could correspond to the reactivation of inherited, along-strike fracture zones (opening-mode fracture concentrations such as big joints, fracture corridors. Inherited faults, etc), (2) they could be created as mechanical instabilities during the fold formation (syn-folding origin), in particular through small reverse faults. In both cases, early zones of weakness localize the dip-domain boundaries, and control the Increase in curvature in association with increasing fracture density within the boundary. Because they represent well-defined vertically and axially persistent sub-seismic fracture zones generally limited to the thickness of the folded unit, dip-domain boundaries could enhance the axial permeability of folded and fractured reservoirs.
ISSN: 0191-8141

hal-00512651
https://hal.archives-ouvertes.fr/hal-00512651
DOI : 10.1016/j.jsg.2010.03.002