Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Structural controls are critical during magmatic-to-hydrothermal transition in the formation of intrusion-related gold deposits. They may explain why only some parts of intrusions are mineralized and why only very few intrusions host large deposits. Moreover, most of these gold deposits postdate peak regional metamorphism and were formed in zones of relatively low strain. Indeed, the efficiency of structural gold traps is highest along favourably oriented intrusion/host-rock contacts where mechanical instability maintains high permeability in the cracked thermal aureole. This may be reinforced by melt injections from an underlying root zone. We present a structural analysis of the deformation features of a granite-pluton roof; large-scale dykes and a network of gold veins are intensively developed in this roof, recording a succession of mechanical instabilities. Our gravity survey underlines the presence of a pluton feeder zone located just beneath the mineralized network. It is argued that interferences between regional stress and melt injection in the feeder zone favoured the development of the network by strain located close to the granite roof. This stresses the role of mechanical instabilities triggered by the combined effects of regional stress and melt dynamics in determining the location and size of this type of gold deposit.
ISSN: 0191-8141

insu-00914780
https://hal-insu.archives-ouvertes.fr/insu-00914780
https://hal-insu.archives-ouvertes.fr/insu-00914780/document
https://hal-insu.archives-ouvertes.fr/insu-00914780/file/manuscript.pdf
DOI : 10.1016/j.jsg.2013.11.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Madeira Sn-Nb-Ta deposit corresponds to the albite-enriched facies of Madeira granite (Madeira Suite) that is part of a NE-SW alignment of three granitic bodies. Structural analyses suggest that the albite-enriched granite emplacement and development of related structures occurred in a different tectonic setting than earlier facies of the granitic bodies in the NE-SW alignment and that the structure was dominated by a N-NE-trending shortening related to a left-lateral motion along a NE-SW corridor within a Riedel shear. Three types of structures (flat-lying, near vertical fractures, and geodes/miaroles) concentrated the last magmatic-related fluid in the albite-enriched granite. U-Pb in situ zircon dating of the albite-enriched granite yielded an age of 1,822 ± 22 Ma. The other granitic plutons of the Madeira Suite, Água Boa granite (topaz-granite facies), and Europa per-alkaline granite formed at 1,825 ± 14 Ma, 1,831± 11 Ma, and 1,839 ± 10 Ma, respectively. The granite bodies of the Madeira Suite occur in an area occupied by a cauldron complex composed of volcanic sequences (Iricoumé Group) and associated A-type granites (Mapuera Suite), and their formation was controlled by the reactivation of the cauldron structures and the pre-existing structures. The gap between the cauldron complex and the Madeira Suite is no greater than 35 Ma. The geological evolution was reanalyzed from the perspective of an entire extensional environment where three successive episodes of A-type magmatism and basin formation (Urupi Formation) occurred. The data and interpretations of this work imply crucial constraints on the petrologic models proposed for the albite-enriched granite and, consequently, on the genesis of the Madeira deposit
ISSN: 0301-9268

insu-00939888
https://hal-insu.archives-ouvertes.fr/insu-00939888
https://hal-insu.archives-ouvertes.fr/insu-00939888/document
https://hal-insu.archives-ouvertes.fr/insu-00939888/file/BastosNeto-PrecambrianResearch-2014.pdf
DOI : 10.1016/j.precamres.2013.12.021

Éditeur(s) : HAL CCSD
Résumé : International audience
The giant Imiter silver mine located at the northern edge of the West African craton in Morocco is assumed to be a late Neoproterozoic epithermal deposit mainly characterized by a hypogene paragenesis of Agrich sulphides and sulfosalts, and Ag-Hg alloys occuring preferentially in quartz-rich veins. The secondary enrichment zone at Imiter reaches a thickness of 50 to 150 m below ground surface. The upper levels, famous because of giant native silver crystals, grade up to 300 kg/t. Metallographic observations, SEM-EDS and XRD analyses reveal the presence of a quite complex secondary paragenesis made of acanthite, cinnabar, imiterite, perroudite, cerussite, mimetite, iron oxyhydroxides, synchisite and coronadite. Supergene alteration processes of the giant Imiter silver mine deposit consist of the remobilisation of the primary hypogene paragenesis by (i) deep and old basinal brines and (ii) downward infiltrations of surficial waters becoming progressively more reduced and F-enriched in response to fluid-rock interactions. Development of such a supergene mineralization strongly suggests prevalence of arid to semiarid conditions.
Let's talk ore deposits, proceeding of the eleventh biennial sga meeting
Antofagasta, Chile

hal-00601984
https://hal-brgm.archives-ouvertes.fr/hal-00601984
https://hal-brgm.archives-ouvertes.fr/hal-00601984/document
https://hal-brgm.archives-ouvertes.fr/hal-00601984/file/SGA2011_0234.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Crystal growth driven by a flowing solution is modeled for a flow with low Reynolds number using a computational dynamic software. Considering equivalent crystallographic faces, the chemical flux is calculated along upstream and downstream faces. Upstream flux is higher compared to downstream and leads to a symmetry breakdown of the crystal shape and develops mirror symmetry parallel to the flow velocity. Moreover the ratio of these two fluxes (upstream / downstream) gives a quantitative relation between the relative crystal growth rate and the flow velocity. Thus, using an inverse method, the flow direction and velocity can be deduced by the study of the variation of the growth band thicknesses of equivalent crystallographic faces. This new method was applied to the formation of metasomatic tourmalinite associated with a leucogranite sill. The approach is complemented by a study of the chemistry of the tourmaline. In the studied case, the application of the new method gives the high fluid velocities in pores (10-3 - 10-4 m/s) during metasomatism. Equivalent Darcy velocities are estimated and discussed accounting for the major role played by the regional deformation. Finally, a two-stage tectono-hydrodynamic model is proposed for the metsomatism. The first stage is genetically linked to the sill injection, and the second is characterized by a wider event with hydrothermal flow passing along the leucogranite sills.
ISSN: 0012-821X

Droits : info:eu-repo/semantics/OpenAccess
insu-00352307
https://hal-insu.archives-ouvertes.fr/insu-00352307
https://hal-insu.archives-ouvertes.fr/insu-00352307/document
https://hal-insu.archives-ouvertes.fr/insu-00352307/file/Sizaret_et_al_final.pdf
DOI : 10.1016/j.epsl.2009.01.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The present study aims to apply the AMS method (Anisotropy of Magnetic Susceptibility) at a regional scale to track the fluid circulation direction that has produced an iron metasomatism within pre-existing dolomite host rock. The Urgonian formations hosting the Zn-Pb mineralizations in La Florida (Cantabria, northern Spain) have been taken as target for this purpose. Sampling was carried out, in addition to ferroan dolomite host rock enclosing the Zn-Pb mineralizations, in dolomite host rock and limestone to make the comparison possible between magnetic signals from mineralized rocks, where fluid circulation occurred, and their surrounding formations. AMS study was coupled with petrofabric analysis carried out by texture goniometry, Scanning Electron Microscopy (SEM) observations and also Shape Preferred Orientation (SPO) statistics. SEM observations of ferroan dolomite host rock illustrate both bright and dark grey ribbons corresponding respectively to Fe enriched and pure dolomites. SPO statistics applied on four images from ferroan dolomite host rock give a well defined orientation of ribbons related to the intermediate axis of magnetic susceptibility K2. For AMS data, two magnetic fabrics are observed. The first one is observed in ferroan dolomite host rock and characterised by a prolate ellipsoid of magnetic susceptibility with a vertical magnetic lineation. The magnetic susceptibility carrier is Fe-rich dolomite. These features are probably acquired during metasomatic fluid circulations. In Fe-rich dolomite host rock, ‹c› axes are vertical. As a rule, (0001) planes (i.e. planes perpendicular to ‹c› axes) are isotropic with respect to crystallographic properties. So, the magnetic anisotropy measured in this plane should reflect crystallographic modification due to fluid circulation. This is confirmed by the texture observed using the SEM. Consequently, AMS results show a dominant NE-SW elongation interpreted as the global circulation direction and a NW-SE secondary elongation that we have considered as sinuosities of the fluid trajectory. The second type of magnetic fabric is essentially observed in the limestone and characterised by an oblate form of the ellipsoid of magnetic susceptibility, a horizontal magnetic foliation and mixed magnetic susceptibility carriers. It is interpreted as a sedimentary fabric.
ISSN: 0012-821X

insu-00342499
https://hal-insu.archives-ouvertes.fr/insu-00342499
https://hal-insu.archives-ouvertes.fr/insu-00342499/document
https://hal-insu.archives-ouvertes.fr/insu-00342499/file/Essalhi-EPSL-2008.pdf
DOI : 10.1016/j.epsl.2008.11.011

Éditeur(s) : HAL CCSD
Résumé : International audience
The Madeira deposit (Sn, Nb, Ta) at Pitinga, Amazonia, in Brazil, is associated with the albite-enriched facies of the A-type Madeira granite (~1,820 Ma). Fluorine (cryolite), Y, REE, Li, Zr, and Th are potential by-products of the disseminated ore. We studied the xenotime from the core albite-enriched (CAG), transitional albite-enriched granite (TAG) and pegmatitic albite-enriched granite (PAG). In all these rocks, xenotime is magmatic, has high HREE contents (0.37 to 0.54 atoms per formula unit; LREE are not detected), and low U, Th and Ca content. The CAG xenotime is the richest in REE, followed by that in the PAG and TAG units. Fluorine was detected in all xenotime crystals from CAG (up to 5.10%) and from PAG (up to 1.40%) and in most crystals from TAG (up to 0.68%). Where the xenotime is richer in F, the Na and Si increase, the P, Ca, and the effectiveness of a thorite-type substitution decrease. Fluorine controls the ratio REE/Y; the richer the xenotime in F, the richer it is in REE, in particular Er and Yb. The cell parameters a and c are significantly shortened in F-rich xenotime. There is no evidence of OH in the structure. We contend that fluorine substitutes for O to form PO3F tetrahedra, as in bobdownsite. The formation of the PO3F tetrahedra in the xenotime accounts well for the compatibility between the crystallographic characteristics and the chemical composition.
The Canadian Mineralogist

insu-00805907
https://hal-insu.archives-ouvertes.fr/insu-00805907
DOI : 10.3749/canmin.50.6.1453

Éditeur(s) : HAL CCSD
Résumé : International audience
Tin mineralization in Achmmach deposit (NE of Moroccan Central Massif) is associated with tourmaline-rich alteration halos and faults, within N70 shear zones, hosted in sandstones and metapelites of the Upper Visean-Namurian. Such deposits were reported as late-Variscan in age and related to the emplacement of late orogenic granite not outcropping in the studied area.From field constraints, it appears that the late Variscan phase is marked by a transition from transpression to extension with conditions of deformation evolving from ductile to brittle environments. During the transpressive phase (horizontal shortening direction roughly trending E-W), pervasive tourmaline is deposited under the form of metasomatic halos around fractures in the upper levels relative to the deep batholith. This hydrothermal activity is coeval with ductile shear zones within a large corridors trending N70. Tourmaline-rich alteration appears as a hardening stage contributing to the modification of the tectonic style of rocks. Thereafter, a strong brecciation occurs in response of re-using and re-opening of the strike-slip structure. The result is (1) the formation of dextral (N070, N020) and sinistral (N120) shears, and (2) the circulation of fluids within early tourmalinites and formation of tourmaline-rich breccia. Subsequently, during the late orogenic extensional phase, tourmalinite breccias reopened as normal faults acting as overpressure fluid pathways for developing other breccias and veins. Such event is marked by deposition of tin mineralization i.e., cassiterite followed by sulphides, and then fluorite and carbonates at the end.From analysis of the shear-zone structure and superimposition of tourmalines and tin mineralization in the same structures, it is possible to suggest a structural control continuum. Such control is well expressed during metasomatism and deposition of hydrothermal tourmaline under the transpressive phase. Thereafter, under the extensive phase allowing open-space, tin-mineralization were trapped.This study has been supported by AI MA/09/210
24ème RST
Pau, France

insu-01546927
https://hal-insu.archives-ouvertes.fr/insu-01546927

Éditeur(s) : HAL CCSD
Résumé : International audience
The Achmmach tin mineralization (NE of theMoroccan Central Massif) is associated with tourmaline-richalteration halos, veins, and faults hosted in sandstones andmetapelites of the Upper Visean-Namurian. These depositsare reported to be late Hercynian in age and related to theemplacement of late-orogenic granite not outcropping in thestudied area. Structural and paragenetic studies of theAchmmach tin deposit were conducted in order to establisha general model of the mineralization. From field constraints,the late Hercynian phase is marked by a transition fromtranspression to extension with deformation conditions evolvingfrom ductile to brittle environments. The transpression(horizontal shortening direction roughly trending E-W) is coevalwith the emplacement of the first tourmaline halos alongseveral conjugated trends (N070, N020, and N120).Thereafter, a tourmaline-rich breccia formed in response tothe fracturing of early tourmaline-altered rocks.Subsequently, during the extensional phase, these structureswere reactivated as normal faults and breccias, allowing theformation of the main tin mineralization (cassiterite) associatedwith a wide variety of sulfides (arsenopyrite, chalcopyrite,sphalerite, galena, pyrrhotite, bismuthinite, pyrite, and stannite). This evolution ends with fluorite and carbonate deposition.The hydrothermal fluid flow velocity, calculated byapplying statistical measures on the tourmaline growth bands,varies with the lithology. Values are lower in metapelites andhigher in breccia. In the general evolution model proposedhere, tourmaline alteration makes the rock more competent,allowing for brittle fracturing and generation of open spacewhere the main Sn mineralization was precipitated.
Mineralium Deposita

insu-01240481
https://hal-insu.archives-ouvertes.fr/insu-01240481
DOI : 10.1007/s00126-015-0613-0