Éditeur(s) : HAL CCSD ACS American Chemical Society - Publications
Résumé : International audience
ABSTRACT: In this paper, the structural, optical and thermal properties of n-type (100),p-type (100) and (111) mesoporous silicon (MePSi) are reported. The mesoporous silicon wasprepared by an electrochemical process from bulk silicon wafer. Depending on the etchingdepth, analyses show that the porosity of p-type (111) increased by 32 to 40% compared to p(100) which, in turn, increased by 22 to 48% compared to n-type (100). The structuremorphology and the abundance of Si-Ox and Si-Hy also depended heavily on the type andcrystal orientation of MePSi. The thermal properties of the MePSi layers such as thermalconductivity (κ), volumetric heat capacity (ρCp) and thermal contact resistance (Rth) weredetermined using the pulsed photothermal method. The thermal conductivity of bulk silicondropped sharply after etching, decreasing by more than twenty-fold in the case of n-type (100)and by over forty-five fold for p-type (100) and (111). According to the percolation modeldepending on both porosity and phonon confinement, the drop in thermal conductivity wasmainly due to the nanostructure formation after etching. Thermal investigations showed thatthe volumetric heat capacity (ρCp) followed the barycentric model which depends mainly onthe porosity. The thermal contact resistances of MePSi layers were estimated to be in therange of 1x10-8 to 1x10-7 K⋅m2⋅W-1.
The Journal of Physical Chemistry C

hal-01495490
https://hal.archives-ouvertes.fr/hal-01495490
DOI : 10.1021/acs.jpcc.6b13101

Éditeur(s) : HAL CCSD
Résumé : En traitement d'image, avant toute exploitation de résultats d'une segmentation d'image, il est souvent nécessaire de réaliser une opération de fusion. Le but est de créer une partition formée de composantes connexes, modélisant les objets présents dans l'image. La segmentation initiale des images est souvent obtenue par l'exploitation d'attributs de bas-niveau (couleur, texture, forme...). La théorie Gestalt permet de prendre en compte des informations d'un niveau supérieur qui s'appuient sur l'organisation spatiale des objets et groupement d'objets initialement segment'es. Dans cet article, nous proposons une méthode de fusion de régions. L'originalité des travaux repose sur l'ajout d'un nouveau critère qui, associé aux critères Gestalt, permet de prendre en compte les objets jugés d'intérêt par le photographe, c'est-'a-dire les objets aux contours nets. Les régions associées aux objets d'intérêts seront alors préservées alors que les régions floues ou aux contours flous, situées dans l'arrière-plan, auront tendance 'a fusionner entre elles.
Journée du GdR Mathématique de l'Optimisation et Application (MOA)
Saint-François, Guadeloupe

hal-00706538
https://hal.archives-ouvertes.fr/hal-00706538

Éditeur(s) : HAL CCSD
Résumé : International audience
2012 IEEE AP-S International Symposium
Chicaco, United States

hal-01187992
https://hal.archives-ouvertes.fr/hal-01187992
DOI : 10.1109/APS.2012.6348672

Éditeur(s) : HAL CCSD
Séminaire du Laboratoire de Mathématiques Informatique et Applications (LAMIA)
Pointe-à-Pitre, Guadeloupe

hal-00835738
https://hal.archives-ouvertes.fr/hal-00835738

Éditeur(s) : HAL CCSD
Résumé : National audience
Séminaire du Laboratoire de Mathématiques Informatique et Applications (LAMIA)
Pointe-à-Pitre, Guadeloupe

hal-00694143
https://hal.archives-ouvertes.fr/hal-00694143

Éditeur(s) : HAL CCSD American Institute of Physics
Résumé : International audience
Laser-induced periodic surface structures (LIPSS) were formed on Cu/Si or Cu/glass thin films using Nd:YAG laser beam (40 ps, 10Hz, and 30mJ/cm2). The study of ablation threshold is always achieved over melting when the variation of the number of pulses increases from 1 to 1000. But the incubation effect is leading to reduce the threshold of melting as increasing the number of laser pulse. Also, real time reflectivity signals exhibit typical behavior to stress the formation of a liquid phase during the laser-processing regime and helps to determine the threshold of soft ablation.Atomic Force Microscopy (AFM) analyses have shown the topology of the micro-crater containing regular spikes with different height. Transmission Electron Microscopy (TEM) allows finally to show three distinguished zones in the close region of isolated protrusions. The central zone is a typical crystallized area of few nanometers surrounded by a mixed poly-crystalline and amorphous area. Finally, in the region far from the protrusion zone, Cu film shows an amorphous structure. The real time reflectivity, AFM, and HR-TEM analyses evidence the formation of a liquid phaseduring the LIPSS formation in the picosecond regime. VC 2015 AIP Publishing LLC
ISSN: 0003-6951

hal-01226065
https://hal.archives-ouvertes.fr/hal-01226065
DOI : 10.1063/1.4935413

Éditeur(s) : HAL CCSD
Résumé : International audience
Island barriers are common features along the world coastlines. They have a crucial role in protecting inland and rich lagoonal ecosystems. Erosion and sand transfers on these island barriers during extreme events such as tropical storms or typhoons remain poorly investigated. This work focuses on a multi-scales nalysis (season to decade) of the morphodynamics of Wan-Tzu-Liao sand barrier subjected to extreme waves and sea surges. We combine topographic measurements of the emerged beach at seasonal scale between 2011 to 2012 and long-term (1993-2009) shoreline changes using aerial photographs and satellite images. At the seasonal scale, during Monsoon, the sand was taken from the beach-front and transported seaward outside the study area. During typhoons season, 12 typhoons drove a beach recovery process resulting in a seaward shoreline shift. This annual behavior is discussed in term of roll-over process of the barrier. At the decadal scale, the shoreline changes evidence cross-shore processes in the north part of the barrier and longshore processes in the south. Although the chronic landward migration displays several stages, the strong losses of the barrier area occurs only since 2004 and call into question the general concept of conservation of mass during the roll-over of a barrier.
Revue Paralia, XIIIème Journées Nationales Génie CIvil Génie Côtier
Dunkerque, France

hal-01018203
https://hal.archives-ouvertes.fr/hal-01018203

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : In reservoir engineering, hydrodynamic properties can be estimated from downhole electrical data using heuristic models (e.g., Archie and Kozeny-Carman's equations) relating electrical conductivity to porosity and permeability. Although proven to be predictive for many sandstone reservoirs, the models mostly fail when applied to carbonate reservoirs that generally display extremely complex pore network structures. In this article, we investigate the control of the three-dimensional (3-D) geometry and morphology of the pore network on the electrical and flow properties, comparing core-scale laboratory measurements and 3-D x-ray microtomography image analysis of samples from a Miocene reefal carbonate platform located in Mallorca (Spain). The results show that micrometer- to centimeter-scale heterogeneities strongly influence the measured macroscopic physical parameters that are then used to evaluate the hydrodynamic properties of the rock, and therefore, existing models might not provide accurate descriptions because these heterogeneities occur at scales smaller than those of the integration volume of the borehole geophysical methods. However, associated with specific data processing, 3-D imagery techniques are a useful and probably unique mean to characterize the rock heterogeneity and, thus, the properties variability.
ISSN: 0149-1423

hal-00950066
https://hal.archives-ouvertes.fr/hal-00950066
DOI : 10.1306/05221312134

Éditeur(s) : HAL CCSD
Résumé : International audience
Atomic Energy Review

hal-01319666
http://hal.univ-reunion.fr/hal-01319666
DOI : 10.1016/j.energy.2015.07.089

Éditeur(s) : HAL CCSD
Résumé : Background and objectives.[br/] Dairy propionibacteria are isolated from various ecological niches, including soil, grass, silage, rumen, raw milk and dairy plants, showing great adaptability and robustness. Used as ripening starters in Swiss type cheeses, these food grade bacteria are described as nutraceutical producers and they release into the external medium short chain fatty acids (SCFA), folic acid, cobalamin and the bifidogenic 1,4- dihydroxy-2-naphthoic acid (DHNA). These compounds are known to play a pivotal role in the modulation of intestinal physiology through diet. Considering the pro-apoptotic potential of some of these metabolites, we investigated the potential of dairy products fermented by the main species, Propionibacterium freudenreichii, to prevent colon carcinogenesis. Methods.[br/] We developed a new fermented milk. Taking advantage of milk fractions, high and stable populations of P. freudenreichii were obtained in this product. It was tested in vitro on gastric HGT-1 and colic HT-29 cells with respect to the typical hallmarks of apoptosis. In vivo, the fermented milk was evaluated in piglets with respect to general health parameters and in human microbiota-associated rats, treated or not with dimethylhydrazine (DMH), with respect to intestinal proliferation and apoptosis. Results. Fermented milk induced cell death in both gastric and colon cancer cells. Cellular and molecular characterization of cells dying in response to SCFA treatment revealed cell cycle arrest, drop in intracellular ATP, depolarization of mitochondria, translocation of key apoptosis proteins, processing of caspases and fragmentation of the nucleus. Interestingly, the new fermented milk was shown to potentiate the cytotoxic effect of molecules used in cancer chemotherapy. In accordance, it modulated expression of key apoptotic proteins. In vivo, the fermented milk was evaluated in piglets. Daily oral gavage led to high colic P. freudenreichii populations, to modulation of the intestinal microbiota and modulation of intestinal cytokines. Promotion of piglets’ growth also revealed general probiotic effects of fermented milk. Considering that propionibacteria were metabolically active in the intestine, we further investigated their impact on colon carcinogenesis (induced by dimethylhydrazine, DMH) in human microbiota-associated rats. Consumption of selected strains of propionibacteria resulted in enhanced apoptotic depletion of DMH damaged epithelial cells, yet had no effect on neither proliferation nor apoptosis in healthy rats. Conclusions and perspectives.[br/] These results open new perspectives in the field of colon cancer cells prevention and/or treatment. The synergy with pro-apoptotic chemotherapy molecules suggests that such a fermented product may be proposed as a food supplement to enhance the effects of anticancer treatments.
colloque international « Nutrition and Cancer : Hot topics from biology to public health issues »
Paris, France

hal-01190452
https://hal.archives-ouvertes.fr/hal-01190452
PRODINRA : 201853

Éditeur(s) : HAL CCSD Intech
Résumé : International audience
The massive integration of sustainable energies into electrical grids (non-interconnectedor connected) is a major problem due to their stochastic character revealed by strongfluctuations at all scales. In this paper, the scaling behaviour or power law correlationsand the nature of scaling behaviour of sustainable resource data such as flow velocity,atmospheric wind speed, solar global solar radiation and sustainable energy such as,wind power output, are highlighted. For the first time, Fourier power spectral densitiesare estimated for each dataset. We show that the power spectrum densities obtained areclose to the 5/3 Kolmogorov spectrum. Furthermore, the multifractal and intermittentproperties of sustainable resource and energy data have been revealed by the concavityof the scaling exponent function. The proposed analysis frame allows a full descriptionof fluctuations of processes considered. A good knowledge of the dynamic of fluctua-tions is crucial to management of the integration of sustainable energies into a grid.
Sustainable Energy - Technological Issues, Applications and Case Studies

hal-01528087
https://hal.archives-ouvertes.fr/hal-01528087
DOI : 10.5772/106341

Éditeur(s) : HAL CCSD
Résumé : Gravitropism is a major process in vertical growth as it allows the positioning of plant in the gravity field and thus, for trees, it takes part in the light foraging strategies. Without any gravitropism, trees would adopt a weeping habit or fall on the ground due to the increasing with growth supported weight, especially at the advance regeneration stage (sapling stage) in the understorey, where tree are very slender and poorly stiff. Most of the gravitropic studies are made by physiologists in order to understand the process and thus are associated to complex laboratory methods (genetic engineering, anatomical studies, accurate 2D ou 3D measurements of form changes with time). In order to study the ecological relevance and the specific diversity of gravitropic performances in natural forests, we developed a framework that uses different kinds of datas. Synchronical analysis has been done i) at the population level in large sample of trees and ii) at the tree level from destructive measurement of the dissymmetry maturation strains known to be the main motor of the posture control reaction of trees. In both cases, biomechanical models allows to estimate some aspects of the dynamic gravitropic process. Diachronical analysis has been done in natural conditions on permanent plots, or in a more traditional way, by observing in greenhouse experiments the righting movements of plants artificially tilted. In the first case, the problem is the high variability of natural disturbances and the slowness of growth and movements in the dark understorey. The second choice allows a measurement of a capacity (i.e. the ability of the species to react in quite extreme conditions of verticality disturbance but good for growth light and nutrient conditions) that is more easy to analyse, but is maybe not so relevant for estimating the ecological strategy (some species could have developed a high efficience of gravitropic reaction in natural conditions by avoiding the mechanical disturbance or adapting the reaction to slow growth and changing environments in natural conditions). All approaches use the same basic biomechanical modelling, i) to analyse simultaneously the reaction and the disturbance (due to the weight increase) during growth, or ii) to combine different parameters (geometry, growth, weight, maturation strains) involved in shape changes and posture control. They give a classification of the species according to their gravitropic performances. Results on 15 species are discussed, with relation to shade-tolerance or avoidance.
6th Plant Biomechanics Conference
Cayenne, France

hal-00565956
https://hal.archives-ouvertes.fr/hal-00565956

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this paper, we propose a benchmarking of supervised machine learning techniques (neural networks, Gaussian processes and support vector machines) in order to forecast the Global Horizontal solar Irradiance (GHI). We also include in this benchmark a simple linear autoregressive (AR) model as well as two naive models based on persistence of the GHI and persistence of the clear sky index (denoted herein scaled persistence model). The models are calibrated and validated with data from three French islands: Corsica (41.91°N; 8.73°E), Guadeloupe (16.26°N; 61.51°W) and Reunion (21.34°S ; 55.49°E). The main findings of this work are, that for hour ahead solar forecasting, the machine learning techniques slightly improve the performances exhibited by the linear AR and the scaled persistence model. However, the improvement appears to be more pronounced in case of unstable sky conditions. These nonlinear techniques start to outperform their simple counterparts for forecasting horizons greater than one hour.
ISSN: 0038-092X

Droits : info:eu-repo/semantics/OpenAccess
hal-01101564
https://hal.archives-ouvertes.fr/hal-01101564
https://hal.archives-ouvertes.fr/hal-01101564/document
https://hal.archives-ouvertes.fr/hal-01101564/file/Manuscript_Lauretetal_Rev_unmarked.pdf
DOI : 10.1016/j.solener.2014.12.014

Éditeur(s) : HAL CCSD
Résumé : International audience
Proceedings of the 15th International Conference of the Graphonomics Society - IGS 2011
Cancun, Mexico

hal-00604380
https://hal.archives-ouvertes.fr/hal-00604380

Éditeur(s) : HAL CCSD wiley
Résumé : International audience
The slow advance of a crack in sodo-silicate glasses was studied at nanometer scale by in-situ atomic force microscopy (AFM) in a well-controlled atmosphere (N2 and H2O). An enhanced diffusion of sodium ions in the stress-gradient field at the sub-micrometric vicinity of the crack tip was revealed through several effects: growth of nodules in height images, changes in the AFM tip–sample energy dissipation as detected in phase images. Ex-situ chemical micro-analyses completed the AFM measurements. The nodules patterns revealed a dewetting phenomenon evidenced by “breath figures”, i.e. analog to the fogging that occurs when a vapour condenses onto a 'cold' surface [D. Beysens et al., Phys. Rev. Let. 57, 1433 (1986)]. These experimental results were explained by a two-step process: i) a fast migration of sodium ions towards the fracture surfaces as proposed by Langford et al. [J. Mat. Res. 6, 1358 (1991)], ii) a slow backwards diffusion of the cations as evidenced in these AFM experiments (typical time: few minutes). Measurements of the diffusion coefficient of that relaxing process were done at room temperature. Our results strengthen the theoretical concept of a near-surface structural relaxation due to the stress-gradient at the vicinity of the crack tip. Raman and SIMS studies revealed that nodules – for samples studied after exposition to common air - are preferentially covered by an organic overlayer of a carboxylate salt with a long aliphatic chain. The catalytic role of sodium ions in that chemical process is suspected.
Fractography of glasses an ceramics V
Rochester, United States

hal-00408605
https://hal.archives-ouvertes.fr/hal-00408605

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Patterns of connectivity and self-recruitment are recognized as key factors shaping the dynamics of marine populations. Connectivity is also essential for maintaining and restoring natural ecological processes with genetic diversity contributing to the adaptation and persistence of any species in the face of global disturbances. Estimates of connectivity are crucial to inform the design of both marine protected areas (MPAs) and MPA networks. Among several approaches, genetic structure is frequently used as a proxy for patterns of connectivity. Using 8 microsatellite loci, we investigated genetic structure of the two-banded sea bream Diplodus vulgaris, a coastal fish that is both commercially and ecologically important. Adults were sampled in 7 locations (stretches of coastline approximately 8 km long) and juveniles in 14 sites (~100 to 200 m of coastline) along 200 km of the Apulian Adriatic coast (SW Adri-atic Sea), within and outside an MPA (Torre Guaceto MPA, Italy). Our study found similar genetic diversity indices for both the MPA and the surrounding fished areas. An overall lack of genetic structure among samples suggests high gene flow (i.e. connectivity) across a scale of at least 200 km. However, some local genetic divergences found in two locations demonstrate some heterogeneity in processes renewing the population along the Apulian Adriatic coast. Furthermore, two sites appeared genetically divergent, reinforcing our observations within the genetic makeup of adults and confirming heterogeneity in early stage genetics that can come from either different supply populations or from chaotic genetic patchiness occurring under temporal variation in recruitment and in the reproductive success. While the specific role of the MPA is not entirely known in this case, these results confirm the presence of regional processes and the key role of connectivity in maintaining the local population supply.
ISSN: 1932-6203

hal-01442055
https://hal-univ-perp.archives-ouvertes.fr/hal-01442055
https://hal-univ-perp.archives-ouvertes.fr/hal-01442055/document
https://hal-univ-perp.archives-ouvertes.fr/hal-01442055/file/journal.pone.0167441.pdf
DOI : 10.1371/journal.pone.0167441.s009

Éditeur(s) : HAL CCSD
Résumé : International audience
The segmentation of digital images of plants is a tricky operation. In the example of a plant image on a unhomogeneous background, i.e. taken in its environment, the colorimetric diversity of the elements of a scene or the large number of forms can amplify the phenomena of over-segmentation. Global segmentation methods such as Mean Shift are then in this case the ones which will give the best results. These methods take into account the totality of the pixels of an image before classifying a point. On the other hand, complexity is increased, because it is necessary to go through the whole image treated, in order to find the mode of the point which one wishes to classify. In this article, we plan to couple the global segmentation with a local method which would take over in the event of obvious classification of a given point. The Mean Shift method is used for this purpose in association with Markov's chains.
Applied Imagery Pattern Recognition (AIPR)
Washington DC, United States

hal-00637143
https://hal.archives-ouvertes.fr/hal-00637143
DOI : 10.1109/AIPR.2011.6176338

Éditeur(s) : HAL CCSD Royal Society
Résumé : International audience
Trees control their posture by generating asymmetric mechanical stress around the periphery of the trunk or branches. This stress is produced in wood during the maturation of the cell wall. When the need for reaction is high, it is accompanied by strong changes in cell organization and composition called reaction wood, namely compression wood in gymnosperms and tension wood in angiosperms. The process by which stress is generated in the cell wall during its formation is not yet known, and various hypothetical mechanisms have been proposed in the literature. Here we aim at discriminating between these models. First, we summarize current knowledge about reaction wood structure, state and behaviour relevant to the understanding of maturation stress generation. Then, the mechanisms proposed in the literature are listed and discussed in order to identify which can be rejected based on their inconsistency with current knowledge at the frontier between plant science and mechanical engineering.
Journal of the Royal Society Interface

hal-01392832
https://hal.archives-ouvertes.fr/hal-01392832
https://hal.archives-ouvertes.fr/hal-01392832/document
https://hal.archives-ouvertes.fr/hal-01392832/file/AlmerasClair2016_JRSInterface_Critical%20review%20on%20the%20mechanisms%20of%20maturation%20stress%20generation%20in%20trees_HAL.pdf
DOI : 10.1098/rsif.2016.0550

Éditeur(s) : HAL CCSD
Résumé : International audience
In boundary lubrication regime, friction reduction and antiwear processes are associated to the presence of additives in the lubricating oils or greases. These processes are due to the formation of protective tribofilms resulting from chemical reactions between the additives and the sliding surfaces, in the physico-chemical conditions of the sliding contact. Conventional antiwear additives mainly consist of transition metal organo phosphate or thiophosphates which present a remarkable efficiency in the case of contacts between ferrous alloys. In the case of non reacting surfaces, these additives become inactive. Recently developped lubrication strategies consist in the use of dispersion in oils of nano additives able to build the protective tribofilm in the sliding contact without reaction with the surfaces. Carbon fluorinated phases, due to their lamellar structure and their high chemical stability even at relatively high temperature (400°C) represent interesting candidates as lubricant nano-additives subjected to present friction reduction, anti wear and anti corrosion actions. This work presents the tribologic behaviour of some carbon fluorinated derivatives such as graphite fluorides, fluorinated carbon nanofibers, fluorinated carbon nanodiscs and fluorinated carbon blacks. The influence, on the tribologic performances, of the structure of the initial carbon phases, of the fluorination rate (0
World Tribology Congress 2013
Torino, Italy

Droits : info:eu-repo/semantics/OpenAccess
hal-00926514
https://hal.archives-ouvertes.fr/hal-00926514
https://hal.archives-ouvertes.fr/hal-00926514/document
https://hal.archives-ouvertes.fr/hal-00926514/file/Delbe_9783.pdf
OATAO : 9783

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper discusses and analyses the productivity of solar home systems in isolated areas in French Guiana, a region characterized by specific human and environmental conditions.Its aim is a better understanding of the attitudes, expectations, and relationship of the users towards the solar home system. The data collected made it possible to make suggestions for adapting the photovoltaic systems to their environment by taking into account social, cultural, and geoclimatic specificities. Analysis of on-site productivity provides valuable information on energy profiles and types of use. Field surveys made it possible to associate users’ perception of the energy production equipment and their degree of satisfaction with operating efficiency and on-site maintenance. This aspect is essential for analyzing the actual rate of use of the energy that is theoretically available.Parallel to these surveys, the results of the study carried out on the performance of the solar home systems made it possible to learn the quantitative aspects of the energy produced and consumed as well as the qualitative aspects of the parameters that condition the performance of the photovoltaic systems.After keyboarding, the subjective, qualitative as well as the quantitative variables were processed using a statistical analysis program in order to determine the correlations between them and to prepare the final conclusions.
ISSN: 1364-0321

hal-01304585
https://hal.archives-ouvertes.fr/hal-01304585
https://hal.archives-ouvertes.fr/hal-01304585/document
https://hal.archives-ouvertes.fr/hal-01304585/file/article%20RSER%20Hal.pdf
DOI : 10.1016/j.rser.2009.06.015