Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We have analyzed shear wave splitting recorded by portable and permanent broadband and long-period stations located in the eastern United States. Teleseismic shear waves (SKS, SKKS, and PKS) were used to retrieve the splitting parameters: the orientation of the fast wave polarization plane ϕ and the delay time δt. In total, 120 seismic events were processed, allowing for more than 600 splitting measurements. Within the Appalachians, stations located in the western (external) part are characterized by δt≈1s and ϕ trending N50°– 70°E in the south and central regions and N30°–40°E in the north, closely following the trend of the orogenic belt in these areas. The transition region between north and central is characterized by δt≈1–1.3 s and by E-W trending ϕ that are at a high angle to the regional geologic trend. Measurements at two stations located in the eastern (internal) part of the belt indicate very weak anisotropy. The large-scale pattern of anisotropy is not consistent with that predicted for simple asthenospheric flow beneath the plate. Splitting along the southern and eastern margins of the continent is consistent with that expected for Grenvillian deformation, an alternative model of asthenospheric flow around the cratonic keel cannot be ruled out. Within the cratonic core, the correlation between δt and lithospheric thickness suggests a lithospheric anisotropy. Smaller-length-scale variations also argue for a significant contribution of lithospheric structures. The fabric responsible for shear wave splitting may have formed during tectonic episodes that affected the eastern United States, i.e., the Grenville and Appalachian orogenies and the subsequent rifting of the North Atlantic Ocean. Our observations in the western Appalachians suggest that the anisotropy may be preserved since the Grenvillian orogeny. The absence of detectable splitting in the two stations in the eastern Appalachians is attributed to the igneous intrusions related to the Atlantic rifting. The measurements in the transition between the northern and central southern Appalachians, constitute an intriguing anomaly, whose E-W ϕ have little obvious relation to the regional surface geology. We suggest two possible causes: (1) the local dominance of asthenospheric flow, motivated by the proximity of a pervasive low-velocity anomaly and (2) lithospheric deformation in a transcontinental strike-slip fault zone active during the Appalachian collision.
ISSN: 2169-9313

hal-01388859
http://hal.univ-reunion.fr/hal-01388859
http://hal.univ-reunion.fr/hal-01388859/document
http://hal.univ-reunion.fr/hal-01388859/file/Barruol_JGR_1997.pdf
DOI : 10.1029/96JB03800

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Improving the prediction of sub-seismic structures and their petrophysical properties is essential for realistic characterization of deformed sandstone reservoirs. In the present paper, we describe permeability contrasts induced by cataclastic deformation bands and faults in porous sandstones (766 data synthesized from field examples and the literature). We also discuss the influence of several factors, including tectonic regime, presence of a fault, burial depth, host sandstone porosity, and grain size and sorting for their initiation and permeability. This analysis confirms that permeability decrease is as a function of grain-crushing intensity in bands. Permeability reduction ranges from very limited in crush-microbreccia of compaction bands to high permeability reduction in cataclasites and ultracataclasites of shear-dominated bands, band clusters and faults. Tectonic regime, and especially normal-fault regime, with its tendency to localize strain and generate faults, is identified as the most important factor, leading to the formation of cataclastic bands with high permeability contrasts. Moreover, moderate burial depth (1–3 km) favors cataclastic bands with high permeability contrasts with respect to the host sandstone. High porosity, coarse-grain size and good grain sorting can slightly amplify the permeability reductions recorded in bands.
ISSN: 0191-8141

hal-01218408
https://hal.archives-ouvertes.fr/hal-01218408
DOI : 10.1016/j.jsg.2015.03.013

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
We combine surface structural measurements, subsurface seismic imaging, and magneto-stratigraphic dating to retrieve, through geometric modeling, the detailed history of fold growth and sedimentation across the Huerguosi anticline, on the northern Tianshan piedmont, taking advantage of a beautifully exposed section of growth strata. The model assumes a fault-bend folding mechanism, consistent with subsurface fold geometry. The shortening history is obtained by least-squares fitting of the measured dip angles of the growth strata. The shortening rate across the anticline is shown to have been remarkably constant: it increased only slightly from 0.84 ± 0.04 mm/yr between 10 and 4 Ma to 1.14 ± 0.02 mm/yr over the past 4 m.y. This approach also allows correcting syntectonic sedimentation rates for the effect of the fold growth and shows that the sedimentation rates in the piggyback basin increased abruptly from ~0.4 to ~0.7 mm/yr ca. 4 Ma.
ISSN: 0091-7613

insu-00338254
https://hal-insu.archives-ouvertes.fr/insu-00338254
DOI : 10.1130/G25073A.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The western margin of the Gulf of Mexico (Veracruz State, Mexico) displays an extensive Neogene gravitational system, whereby the Neogene siliciclastic sediments are detached from underlying Mesozoic carbonates along decollement surface in Oligocene underpressured clays. Rapidly subsiding half-grabens develop above the footwall associated with major listric faults, whereas mini-basins develop in the deepest parts of the slope, in conjunction with the growth of west-verging compressional features. Between the high-angle normal faults in the west and the thrust anticlines in the east, a wide roll-over structure has grown progressively, resulting in a major topographic break in the morphology of the slope profile. Coupled forward kinematic modelling (Thrustpack) and stratigraphic modelling (Dionisos), calibrated against seismic profiles and two key nearshore wells, have been applied to representative regional transects across the margin, in order to quantify the vertical (subsidence) and horizontal (gravitational) deformations, and to discuss the impact of various key parameters on the distribution of debris flow depositions. These simulations are compared with data from distant ODP wells and discussed in the scope of current exploration strategies in both the US and Mexican portions of the Gulf of Mexico basin.
ISSN: 0040-1951

hal-00424595
https://hal.archives-ouvertes.fr/hal-00424595
DOI : 10.1016/j.tecto.2008.06.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We compare a global compilation of shear-wave splitting measurements with azimuthal seismic anisotropy parameters inferred from surface-wave tomography. The currently available splitting dataset is taken from a novel comprehensive collection of available publications that is updated interactively online. The comparison between the two types of data is made by calculating predicted splitting parameters from the anisotropic tomography model. Comparing these predicted splitting parameters with the observed ones, we find a considerable correlation between the two datasets at global scale. This result is noteworthy, since such correlation did not seem to exist in previous studies. The spatial resolution associated with the two types of methods is rather different. While surface waves have good vertical resolution and poor lateral resolution of several hundreds of kilometers, SKS splitting measurements have good lateral, but poor vertical resolution. The correlation can be understood in light of recent propositions that anisotropy seen by SKS splitting constrains mostly the upper mantle, and therefore a similar depth region as surface waves. The correlation also confirms the generally good quality of the shear-wave measurements, as well as that of the anisotropic tomography model.
ISSN: 0031-9201

hal-00429396
https://hal.archives-ouvertes.fr/hal-00429396
https://hal.archives-ouvertes.fr/hal-00429396/document
https://hal.archives-ouvertes.fr/hal-00429396/file/Wuestefeld_SKS_SW_correlation_PEPI2009-hal.pdf
DOI : 10.1016/j.pepi.2009.05.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : Detailed sedimentological investigations on numerous outcrops and drill-core sections in the 2.1-Ga-old Franceville basin, Gabon, provide evidence for a large-scale injectite network. The injectites were formed by the injection of sands through a thickness of about 150 m of the FB1 Member, and now cover a minimum area of 70 km2 corresponding to the Bangombé plateau, but are also recognized close to Franceville 35 km farther south-east. The injectite lithology corresponds to a mud- or carbonate-supported sandstone characterized by a loose and uncompacted fabric contrasting with the host-rock. Because the injectites are often parallel to subparallel to the stratification, they were misinterpreted as depositional beds by previous authors. At outcrop, the injectite bodies exhibit sill, dyke, wing and protrusive geometries emplaced during early burial within poorly compacted material, with partial wall erosion and dissociation. The source of the sand material is attributed to a channel-levee turbidite depositional system located in the lower part of the FB1 Member. These deposits were buried by a thick biochemical muddy cap deposited during a starvation phase, which increased the seal capacity of the system. This type of architecture has a high potential to develop compaction disequilibrium during burial. Moreover, in the case of the Francevillian injectites, the abundance of microbial organic matter favoured early methane degassing and lateral charging of the sand reservoir. The overpressure in the channels was periodically released during early burial, through the effect of rapid sedimentary and tectonic loading, and possible seismic activity. The fluidized sand was injected according to a symmetrical wing pattern. Thus, the injected masses caused a local decrease in the grade of the lateritic manganese ore deposit of the Bangombé plateau.
ISSN: 0301-9268

hal-01667217
https://hal.archives-ouvertes.fr/hal-01667217
DOI : 10.1016/j.precamres.2017.09.022

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Main Himalayan Thrust (MHT) is the source of great earthquakes that have been documented along the range. Its geometry is a key parameter that influences accommodation of tectonic loading and earthquake magnitudes along the Himalayan Arc. Although seismic images are available for both the western and the central part of the range, this geometry remains poorly constrained for the Bhutanese Himalayas. Here we address this issue using a 10Be cosmogenic nuclides denudation transect across western Bhutan. We observe a wide low denudation rate domain between 50 km and 110 km from the front followed by a strong northward increase. Using a joint inversion of denudation rates, GPS data, and Holocene uplift rates, we interpret this pattern as a consequence of a flat-ramp transition along the MHT. Compared to central Nepal and Sikkim, this location of the ramp suggests a wider décollement, with implications for greater seismogenic potential of the MHT in western Bhutan.
ISSN: 0094-8276

Droits : info:eu-repo/semantics/OpenAccess
hal-01174088
https://hal.archives-ouvertes.fr/hal-01174088
https://hal.archives-ouvertes.fr/hal-01174088v2/document
https://hal.archives-ouvertes.fr/hal-01174088/file/lerouxmalloufGRL2015.pdf
DOI : 10.1002/2015GL063767

Éditeur(s) : Bordeaux : Pierre Abegou
Siècle(s) traité(s) : 17
Droits : Domaine public
Provenance : Ville de Bordeaux. Bibliothèque municipale
Permalien : http://www.manioc.org/patrimon/BBX17016
BBX17016

Éditeur(s) : HAL CCSD Oceanography Society
Résumé : In April 1961, 13.5 m of basalts were drilled off Guadalupe Island about 240 km west of Mexico's Baja California, together with a few hundred meters of Miocene sediments, in about 3500 m of water. This fi rst-time exploit, reported by John Steinbeck for Life magazine, aimed to be the test phase for the considerably more ambitious Mohole project, whose objective was to drill through the oceanic crust down to Earth's mantle (Lill and Bascom, 1959; Bascom, 1961). Born in the late 1950s, the Mohole project unfortunately ended in muddy waters and was terminated by the United States Congress in 1965 (Shor, 1985; Greenberg, 1971). Undeterred, the scientifi c community rallied again to launch the Deep Sea Drilling Project (DSDP) in 1968, followed by the Ocean Drilling Program (ODP) in 1985, and the Integrated Ocean Drilling Program (IODP) in 2003. These programs have provided solutions to some of the most pressing and interesting problems in ocean and earth science (see, for example, Oceanography 19-4, December 2006).the early 1970s, almost 15 years after the fi rst Mohole attempt, attendees of a Penrose fi eld conference (Conference Participants, 1972) formulated the concept of a layered oceanic crust composed of lavas, underlain by sheeted dikes, then gabbros (corresponding to the seismic layers 2A, 2B, and 3, respectively), which themselves overlay mantle peridotites. Deep drilling into the oceanic crust would provide the ground truth for the Penrose model; the fl ame of the Mohole project still burned. This article draws from results of more than 30 years of ocean drilling at mid-ocean ridges or in older igneous oceanic crust and briefl y reviews some important milestones that improved understanding of crustalaccretion processes at mid-ocean ridges. Figure 1 shows the locations of the numerous DSDP, ODP, and IODP expeditions to which we refer; Table 1 lists site locations.
ISSN: 1042-8275

hal-00407192
https://hal.archives-ouvertes.fr/hal-00407192

Éditeur(s) : [S.l.] : [s.n.]
Siècle(s) traité(s) : 17
Droits : Domaine public
Provenance : Ville de Bordeaux. Bibliothèque municipale
Permalien : http://www.manioc.org/patrimon/BBX17015
BBX17015