Éditeur(s) : HAL CCSD
Résumé : The Karakorum Fault zone (KFZ), lying in the west of the Tibetan plateau, is an important dextral strike-slip fault and the important northern geological boundary of the west Himalaya. In the AyilaRi' gyu Range-Gai Basin area lying in the southeast of the KFZ, Ar-40/Ar-39 thermochronologic analysis was performed on the syn-tectonic minerals in the, metamorphic rocks in the Karakorum ductile shear zone, with the base of petrology and deformation structure researches. According to the microstructure features, the minerals in the shear zone recorded the continuous deformation from high ( > 600 degrees C) to low temperature ( < 250 degrees C) appeared as that the nearly horizontal dextral shearing has transformed into the oblique dextral normal slip, made the greenschist facies of deformation stack oil the early medium-high temperature deformation, indicated the uplift during the slip. The thermochronologic revealed the continuous shear process from the early Miocene to 4Ma at least, which containing three rapid cooling stage: from 25 similar to 22Ma to 21 similar to 18Ma, the deformation locally stopped or slower in the, shallow high temperature shear process; from 15Ma to 12Ma, the rapid uplift of the AyilaRi' gyu Range, the initial formation of the Gar Basin together with the main deep incision of river during the strip-slip of the KFZ; since 9Ma, the AyilaRi' gyu Range has increased the rapid uplift and the Gar Basin has formed finally. According to the different levels of deformation and the dextral displacement of the surface landform with different ages, the long term slip rate and the uplift rate indicated the intense dextral strike slip and uplift associated since the late Quarternary Period.
Acta Petrologica Sinica

hal-00411572
https://hal.archives-ouvertes.fr/hal-00411572

Éditeur(s) : Elsevier Science Bv
Résumé : An exceptional structural picture of the immerged Variscan basement, offshore the Leon metamorphic domain, is supplied by high-resolution LiDAR and echosounder data recorded in the Molene archipelago, western Brittany (France). Various types of fabrics are identified and, from in situ rock sample analyses further combined with field structural data, are interpreted on a lineament trajectory map as the trace of magmatic and tectonic structures. Our onshore/offshore study leads us to propose a two-phase kinematic model that emphasizes the role of a strike-slip duplex in an EW-trending relay zone linking the North Armorican and Pierres Noires ductile shear zones (NASZ, PNSZ). Dextral shearing occurred within a transtensional setting, synchronously with magmatic intrusions (St-Renan granite and an offshore gabbro-diorite complex) dated at 314-320 Ma by new U-Th/Pb ages. It post-dated an early regional foliation related to top-to-the-NE ductile transpresional shearing. Our study emphasizes the key role of strike-slip tectonics in the NW part of the Armorica Variscan belt.
Tectonophysics (0040-1951) (Elsevier Science Bv), 2014-09 , Vol. 630 , P. 236-250

Droits : 2014 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00194/30490/28895.pdf
DOI:10.1016/j.tecto.2014.05.026
http://archimer.ifremer.fr/doc/00194/30490/

Éditeur(s) : HAL CCSD
Résumé : International audience
Mylonite bodies are exhumed extensions at depth of shallow structural level brittle faults. They are characterised by intense strain localisation involving large volumes of middle to lower continental crust. The analysis of shear zone geometry and microstructures is a useful tool to decipher deformation kinematics, though finite strain estimation is still relatively qualitative. Timing of the deformation has also been the focus of numerous studies using the complete spectrum of geochronometers. However, only rare examples provide geochronological data that can be unambiguously interpreted and cooling, recrystallisation and neocrystallisation are difficult to tell from each other. Thus, time-scales over which major mylonite zones develop and remain active under ductile conditions as well as their strain rate often remain poorly documented. We investigated two sections across the South-Armorican Shear Zone (SASZ), a crustal-scale pluri-km thick dextral shear zone active during a single tectonic event of late-Variscan age and associated with syntectonic granite emplacement.. Finite strain profiles on these cross-sections, quantified from average Quartz grain-size in 34 samples, show a strong deformation partitioning towards the center of the SASZ, with a decrease, for each section, from 150µm in slightly deformed zones to less than 7-5 µm in the core of the ultramylonite. Furthermore, toward the core of the SASZ, development of a penetrative shear band network progressively eliminates lenses of less deformed rocks and results in homogenisation of the Quartz grain sizes. In parallel, we performed in-situ UV-laser Ar/Ar dating on the fabric-forming white micas. White micas population can be decomposed into inherited muscovites carried by the folation and newly-formed, syn-tectonic substituted phengites located along the shear bands yielding 2 age groups for each sample. Along the profiles, the difference between these two ages evolves from 10-15 Ma in weakly deformed domains to zero toward the SASZ core. In addition, mylonite-forming phengites yielded the same age irrespectively of their position on the section or of the rock strain.. On the regional point of view, this study brings deformation-ages for the late-orogenic evolution of the South Armorican domain. Strain accumulated along the SASZ in a time-span extending to 300-298 Ma, i.e. contemporaneously with the activity of nearby major extensional shear zones. These results support a new model of crustal-scale shear zone activity, where the whole body of the shear zone is active throughout its history (defined as the largest age difference through the section), i.e. the actively deforming zone does not get progressively narrower. The strain distribution nevertheless evolves with time, with an increasingly large fraction partitioned in the ultramylonitic core.
EGU General Assembly
Vienne, Austria

insu-00839320
https://hal-insu.archives-ouvertes.fr/insu-00839320
BIBCODE : 2010EGUGA..12.9881A

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The ENE-WSW Autun Shear Zone in the northeastern part of the French Massif Central has been interpreted previously as a dextral wrench fault. New field observations and microstructural analyses document a NE-SW stretching lineation that indicates normal dextral motions along this shear zone. Further east, similar structures are observed along the La Serre Shear Zone. In both areas, a strain gradient from leucogranites with a weak preferred orientation to highly sheared mylonites supports a continuous Autun-La Serre fault system. Microstructural observations, and shape and lattice-preferred orientation document high-temperature deformation and magmatic fabrics in the Autun and La Serre granites, whereas low- to intermediate-temperature fabrics characterize the mylonitic granite. Electron microprobe monazite geochronology of the Autun and La Serre granites yields a ca. 320 Ma age for pluton emplacement, while mica 40Ar-39Ar datings of the Autun granite yield plateau ages from 305 to 300 Ma. The ca. 300 Ma 40Ar-39Ar ages, obtained on micas from Autun and La Serre mylonites, indicate the time of the mylonitization. The ca. 15-Ma time gap between pluton emplacement and deformation along the Autun-La Serre fault system argue against a synkinematic pluton emplacement during late orogenic to postorogenic extension of the Variscan Belt. A ductile to brittle continuum of deformation is observed along the shear zone, with Lower Permian brittle faults controlling the development of sedimentary basins. These results suggest a two-stage Late Carboniferous extension in the northeastern French Massif Central, with regional crustal melting and emplacement of the Autun and La Serre leucogranites around 320 Ma, followed, at 305-295 Ma, by ductile shearing, normal brittle faulting, and subsequent exhumation along the Autun-La Serre transtensional fault system.
ISSN: 1437-3254

insu-00596918
https://hal-insu.archives-ouvertes.fr/insu-00596918
https://hal-insu.archives-ouvertes.fr/insu-00596918/document
https://hal-insu.archives-ouvertes.fr/insu-00596918/file/Article_Morvan_v_INIST.pdf
DOI : 10.1007/s00531-011-0673-z

Éditeur(s) : HAL CCSD
Résumé : International audience
Mylonite-bearing crustal shear zones are exhumed extensions at depth of (potentially seismogenic) brittle faultsat shallow structural level. By concentrating deformation, shear zones play a major role in the rheology and mechanicalbehavior of the continental crust. Analysis of shear zone geometry and microstructures is a useful toolto decipher deformation kinematics, though finite strain estimation is still relatively qualitative. Timing of thedeformation has also been the focus of numerous studies using the complete spectrum of geochronometers. However,only rare examples provide geochronological data that can be unambiguously linked with deformation. Thus,time-scales over which major mylonite zones develop and remain active under ductile conditions as well as theirstrain rates often remain poorly documented. Several sections across the South Armorican Shear Zone (SASZ),a crustal-scale, several km-thick dextral shear zone were investigated by structural, petrological and Ar/Ar radiochronologicalmethods. Finite strain profiles on these sections showed a strong deformation partitioning towardsthe ultramylonite core of the SASZ, with a decrease, of both the C’/S mean angle (from ca. 45 to less than5) and the Quartz grain-size (from ca. 150 to 5 m). In parallel, conventional and in-situ Ar/Ar datings on thefabric-forming white micas were performed on compositionally complex white-micas. Inherited magmatic muscovitescarried by the foliation and newly-formed, syn-tectonic substituted phengites located along the shear bandsyielded 2 age groups for the less deformed samples. Along the shear zone cross-section, the difference betweenthese two ages evolves from 10-15 Ma in weakly deformed domains to zero toward the SASZ core. In addition, thevery fine-grained syn-tectonic phengites yielded the same ca. 300-298 Ma age irrespectively of their distance to thecore of the shear zone, even in slightly deformed rocks distant by several km. These results support a new modelof crustal-scale shear zone activity, where the whole body of the shear zone is active throughout its history, i.e.the actively deforming zone does not get progressively narrower. The strain distribution nevertheless evolves withtime, with an increasingly larger fraction partitioned in the ultramylonitic core. Besides, combination of the finitestrain estimations and the Ar/Ar ages enables us to assess the range of strain rates associated with mylonitization.
EGU General Assembly 2014
Vienne, Austria

insu-01565057
https://hal-insu.archives-ouvertes.fr/insu-01565057

Éditeur(s) : HAL CCSD SpringerOpen
Résumé : The Karakorum Fault zone (KFZ) plays an important role in understanding the formation, evolvement and deformation of the Tibetan Plateau. The high-T dextral shearing metamorphic rocks, e.g., mylonites or mylonitized gneisses-granites, locally crop out along the southeastern part of the KFZ in the Ayila Ri'gyü Range area. The SHRIMP U-Pb dating of the syn-kinematic crystallized zircons indicates that the initial age of the KFZ is ∼27 Ma, ∼10 Ma older than previous results. The extensive high-T dextral shearing along the KFZ started at least at 27–20 Ma, accompanied by the syn-kinematic emplacement of leuco-granites. Deformation and concomitant fluid circulation during shearing most likely occurred as early as at 25–13 Ma. The KFZ probably grew from southeast to northwest along the fault as a result of continuous convergence between the India plate and Eurasia plate.
ISSN: 1001-6538

hal-00406402
https://hal.archives-ouvertes.fr/hal-00406402
DOI : 10.1007/s11434-007-0164-6

Éditeur(s) : HAL CCSD
Résumé : International audience
Tin mineralization in Achmmach deposit (NE of Moroccan Central Massif) is associated with tourmaline-rich alteration halos and faults, within N70 shear zones, hosted in sandstones and metapelites of the Upper Visean-Namurian. Such deposits were reported as late-Variscan in age and related to the emplacement of late orogenic granite not outcropping in the studied area.From field constraints, it appears that the late Variscan phase is marked by a transition from transpression to extension with conditions of deformation evolving from ductile to brittle environments. During the transpressive phase (horizontal shortening direction roughly trending E-W), pervasive tourmaline is deposited under the form of metasomatic halos around fractures in the upper levels relative to the deep batholith. This hydrothermal activity is coeval with ductile shear zones within a large corridors trending N70. Tourmaline-rich alteration appears as a hardening stage contributing to the modification of the tectonic style of rocks. Thereafter, a strong brecciation occurs in response of re-using and re-opening of the strike-slip structure. The result is (1) the formation of dextral (N070, N020) and sinistral (N120) shears, and (2) the circulation of fluids within early tourmalinites and formation of tourmaline-rich breccia. Subsequently, during the late orogenic extensional phase, tourmalinite breccias reopened as normal faults acting as overpressure fluid pathways for developing other breccias and veins. Such event is marked by deposition of tin mineralization i.e., cassiterite followed by sulphides, and then fluorite and carbonates at the end.From analysis of the shear-zone structure and superimposition of tourmalines and tin mineralization in the same structures, it is possible to suggest a structural control continuum. Such control is well expressed during metasomatism and deposition of hydrothermal tourmaline under the transpressive phase. Thereafter, under the extensive phase allowing open-space, tin-mineralization were trapped.This study has been supported by AI MA/09/210
24ème RST
Pau, France

insu-01546927
https://hal-insu.archives-ouvertes.fr/insu-01546927

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : New structural, microstructural, and 40Ar/39Ar data from the NW Massif Central (France) provide additional constraints on the timing and tectonic setting of late Variscan granite magmatism. Previous studies had emphasized the role of late orogenic extension in the emplacement of granite plutons in the Limousin region. In contrast, the new data set is consistent with syntectonic emplacement of magma in a dextral simple shear active from 350 to 300 Ma in a transpressional regime. As an alternative hypothesis to late orogenic extension, we propose that magmas migrated into tensional bridges between active P shears associated with a lithospheric shear zone comparable to a pop-up structure. The Galician region, in the western end of the Ibero-Armorican tectonic arc, exhibits major left-lateral ductile shear zones which can be interpreted as conjugate structures to the Limousin and Armorican shear zones. Citation: Ge´belin, A., M. Brunel, P. Monie´, M. Faure, and N. Arnaud (2007), Transpressional tectonics and Carboniferous magmatism in the Limousin, Massif Central, France: Structural and 40Ar/39Ar investigations
ISSN: 0278-7407

hal-00104212
https://hal-insu.archives-ouvertes.fr/hal-00104212
https://hal-insu.archives-ouvertes.fr/hal-00104212/document
https://hal-insu.archives-ouvertes.fr/hal-00104212/file/2005TC001822.pdf
DOI : 10.1029/2005TC001822

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : International audience
The Jurassic Mirdita ophiolite crops out in the western branch of the Hellenide-Dinaride ophiolite belt in the Balkan Peninsula; it represents a remnant of the Tethyan oceanic lithosphere developed between the Apulian and Pelagonian microcontinents. Emplaced during the Cretaceous on the western margin of Pelagonia, the Mirdita ophiolite was involved in southwestward thrusting of the Hellenide-Dinaride tectonic units during the Eocene alpine tectonics. It was little affected, however, by these alpine events as marked by nearly horizontal Cretaceous limestone deposits overlying the ophiolite. A continuous section of Middle Jurassic oceanic crust, including thin gabbros, a N-S-trending sheeted dike complex, and extrusive rocks, is exposed in the central part of the ophiolite and thickens eastward within a regional, N-S-trending synform. Peridotite massifs exposed along the western and eastern edges of this synform show major structural and petrological differences. The eastern ultramafic domain has a harzburgitic mantle exhibiting a high-temperature asthenospheric foliation dipping steeply to moderately to the west. Major chromite deposits are restricted to these eastern ultramafic massifs. The western ultramafic domain has a zoned mantle, with asthenospheric harzburgite exposed at its western margin, progressively replaced eastward by plagioclase-peridotites that were highly strained at low temperatures, and that are bounded by amphibole-peridotites along with crustal rocks. The occurrence of plagioclase is ascribed to melt impregnation processes that occurred immediately before or during intense lithospheric deformation. The gabbros in the eastern massifs are thicker (1-2 km and layered, whereas they are highly thin and discontinuous in the western massifs. Mantle peridotites of the western massifs locally are in direct contact with the overlying diabase and volcanic rocks along ductile shear zones. Development of epidote-amphibolite facies metamorphism in upper-crustal rocks was produced by hydrothermal alteration in the oceanic realm, and was intense and widespread in the western domain. The Mirdita ophiolite likely originated in a short-lived, narrow ocean basin, which was closed during the Middle Jurassic by eastward overthrusting of the western domain, and westward subduction of the eastern domain. This constrictional phase was followed by dextral oblique convergence between the Pelagonian and Apulian microcontinents. This model implies a parautochtonous origin of the Mirdita ophiolite between these two microcontinents.
ISSN: 0020-6814

hal-00456063
https://hal.archives-ouvertes.fr/hal-00456063
DOI : 10.1080/00206810902823982