Éditeur(s) : Yale University
Résumé : Sea-surface temperature images of the coastal upwelling regions off Northwest Africa show that the core of upwelling is sometimes located far from the coast. This has been documented in three regions that share a common feature, namely a wide and shallow continental shelf. This upwelling feature plays a key role in the ecology of the Canary Current System. It creates an innerfront which provides retention for biological material, e.g. fish eggs and larvae, in the highly productive nearshore environment. An analytical model has been developed based on a two dimensional extension of Ekman's solution. The linear and steady response of a homogeneous ocean forced by an upwelling-favorable wind provides a mechanism for the upwelling separation from the coast. The merging of the surface and bottom Ekman layers induces a very weak cross-shore circulation and a "kinematic barrier" for the Ekman transport divergence. In the case of an alongshore wind, the barrier is located near the isobath h ≈ 0.4D, where D is the thickness of Ekman layers. This yields an upwelling cell which is essentially concentrated in the region 0.5D < h < 1.25D, with upwelling occurring preferentially near the isobath h ≈ 0.6D. It turns out that the cross-shore width of upwelling scales with D/S, the ratio of Ekman depth to bottom topographic slope. The application of this solution to real bathymetric profiles rationalizes, not only the offshore upwelling observations in Northwest Africa, but also the influence of topography on the cross-shelf structure of a wind-driven coastal upwelling. The model also quantifies the effect of the cross-shore wind component showing how it drives the nearshore pressure gradient adjustment and how it affects the upwelling. A linear numerical experiment reproduces the theoretical steady solution, thereby allowing investigation of the transient regime. Relaxation of the hypothesis in the numerical model validates the linear assumption of the theory and then allows investigation of the sensitivity to friction parameterizations and the influence of stratification. The latter leads to an "oscillation" of the upwelling cell with seaward migration driven by outcropping and homogeneization of the water column, and, coastal incursion driven by a "boundary layers splitting" process caused by shoreward advection of the isopycnal dome and stratification of the inner shelf.
Journal of Marine Research (Yale University), 2008-09 , Vol. 66 , N. 5 , P. 589-616

Droits : 2008 Yale University
http://archimer.ifremer.fr/doc/2008/publication-6334.pdf
DOI:10.1357/002224008787536790
http://archimer.ifremer.fr/doc/00000/6334/

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
The variation of elastic- wave velocities as a function of the direction of propagation through the Earth's interior is a widely documented phenomenon called seismic anisotropy. The geometry and amount of seismic anisotropy is generally estimated by measuring shearwave splitting, which consists of determining the polarization direction of the fast shear- wave component and the time delay between the fast and slow, orthogonally polarized, waves. In subduction zones, the teleseismic fast shear- wave component is oriented generally parallel to the strike of the trench(1), although a few exceptions have been reported (Cascadia(2) and restricted areas of South America(3,4)). The interpretation of shear- wave splitting above subduction zones has been controversial and none of the inferred models seems to be sufficiently complete to explain the entire range of anisotropic patterns registered worldwide(1). Here we show that the amount and the geometry of seismic anisotropies measured in the forearc regions of subduction zones strongly depend on the preferred orientation of hydrated faults in the subducting oceanic plate. The anisotropy originates from the crystallographic preferred orientation of highly anisotropic hydrous minerals (serpentine and talc) formed along steeply dipping faults and from the larger- scale vertical layering consisting of dry and hydrated crust - mantle sections whose spacing is several times smaller than teleseismic wavelengths. Fault orientations and estimated delay times are consistent with the observed shear- wave splitting patterns in most subduction zones.
ISSN: 0028-0836

hal-00412016
https://hal.archives-ouvertes.fr/hal-00412016
DOI : 10.1038/nature07376

Éditeur(s) : HAL CCSD Editions Dalloz
Résumé : International audience
For a given voting situation, the Strong Borda Paradox occurs when a Condorcet loser exists and is elected. A Condorcet loser is a candidate that loses all his pairwise comparisons. In three-candidate elections, we use an analytical approach to find out, the range of all the scoring rules that can exhibit the Strong Borda Paradox under some well-known preference restrictions and we describe all the scenarios with respect to the rank of the Condorcet loser in the collective rankings. Using the parameterized Barvinok’s algorithm, we provide a simplified representation of the likelihood of the Strong Borda Paradox for the Plurality rule and the Antiplurality rule (given the size of the electorate) with the impartial and anonymous culture condition for each type of restriction.
ISSN: 0373-2630

hal-01631180
https://hal.univ-antilles.fr/hal-01631180
DOI : 10.3917/redp.273.0375

Éditeur(s) : HAL CCSD
Résumé : The mantle deformation processes that control the thinning and break-up of continental lithosphere remain poorly understood. Our knowledge is restricted to either lithospheric scale thermo-mechanical models --that use experimentally derived flow laws--, geophysical imaging and/or rare xenoliths from active continental rifts, such as the East African Rift System. The originality of this work relies on the study of the two largest outcrops of diamond facies subcontinental lithospheric mantle in the world: the Beni Bousera and Ronda peridotite massifs in N Morocco and S Spain, respectively. The structures and petrologic and metamorphic zoning preserved in these massifs --implying a polybaric and polythermal evolution-- provides a unique opportunity to investigate the thermo-mechanical evolution of thick subcontinental lithospheric mantle in extensional settings. In this thesis we studied the deformation mechanisms in both peridotites and pyroxenites to constrain the modes of exhumation of subcontinental lithospheric mantle from garnet-, to spinel-, and finally, to plagioclase lherzolite facies conditions. We combined field mapping of tectonometamorphic domains and structural mapping of ductile structures, microstructural analysis, crystal preferred orientations (CPO) measurements and conventional thermobarometric calculations and thermodynamic modeling (Perple_X) to unravel the pressure and temperature conditions of deformation. We showed that exhumation from garnet- to spinel lherzolite facies conditions was accommodated by fast shearing --in thermal disequilibrium--along a lithospheric scale transtensional shear zone. In this context, the petrological zoning and the large temperature gradient (ca. 100ºC/km) preserved in the Beni Bousera massif represent the mechanical juxtaposition of progressively deeper and hotter lithospheric levels at depths of ca. 60 km in the latest Oligocene (ca. 25 Ma). Final exhumation from spinel- to plagioclase facies lherzolite and emplacement into the crust is best recorded in the Ronda massif where it occurred by inversion and lithospheric scale folding of the highly attenuated continental lithosphere in a back-arc region, probably in relation with southward slab rollback and subsequent collision with the palaeo-Maghrebien passive margin in the early Miocene (21-23 Ma).
Les processus de déformation contrôlant l'amincissement de la lithosphère continentale sont encore mal contraints. Nos connaissances sont principalement basées sur la modélisation thermomécanique d'extension à l'échelle de la lithosphère--utilisant des lois rhéologiques derivées expérimentalement, l'imagerie géophysique et l'analyse de xénolithes provenant de rift continentaux actifs à ce jour, tels que le Rift Est-Africain. L'originalité de ce travail reside dans l'étude des deux plus grands massifs de péridotites sous-continentales ayant enregistrées des conditions primaires du facies à diamant: les massifs de Beni Bousera au nord du Maroc et de Ronda au sud de l'Espagne, respectivement. Les structures et la zonation petrologique et métamorphique --impliquant une évolution polybarique et polythermique-- préservéees dans ces massifs offrent une opportunité unique pour étudier l'évolution thermo-mécanique du manteau sous-continental dans un contexte extensif. Dans ce travail, nous avons étudié les mécanismes de déformation des péridotites et des pyroxénites afin de contraindre les modes d'exhumation du manteau lithosphérique sous-continental, depuis des conditions du facies des lherzolites à grenat, jusqu'au facies à spinelle et enfin à plagioclase. Nous avons combiné la cartographie des faciès tectono-métamorphiques et des structures ductiles de déformation, l'analyse des microstructures, la mesure d'orientations préférentielles de réseau (OPR), et la géothermobarométrie conventionelle couplée à la modélisation thermodynamique (PerpleX) afin de contraindre les conditions de pression et température de la déformation. Nous avons montré que l'exhumation précoce du facies à grenat au facies à spinelle était accomodée par une faille transtensive affectant le manteau lithosphérique. Dans ce contexte, la zonation tectono-métamorphique et le gradient thermique important (ca. 100ºC/km) préservés à Beni Bousera résultent de la juxtaposition mécanique de domaines lithosphériques initialement équilibrés à différentes pressions et températures, fossilisée à une profondeur de ca. 60 km durant l'Oligocène supérieur (ca. 25 Ma). L'exhumation finale du facies de lherzolite à spinelle au facies à plagioclase et l'emplacement final dans la croûte, mieux enregistrés dans Ronda, se sont produits par inversion et plissement de la section lithosphérique fortement amincie dans un contexte arrière-arc, probablement lors du retrait vers le sud de la lithosphère subduite et la collision de l'arc avec les paléo-marges maghrébines au Miocène inférieur (21-23 Ma).
https://tel.archives-ouvertes.fr/tel-00767700

tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700/document
https://tel.archives-ouvertes.fr/tel-00767700/file/THESE_Frets.pdf

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : The analysis of fine-scale spatial genetic structure (FSGS) within populations can provide insights into eco-evolutionary processes. Restricted dispersal and locally occurring genetic drift are the primary causes for FSGS at equilibrium, as described in the isolation by distance (IBD) model. Beyond IBD expectations, spatial, environmental or historical factors can affect FSGS. We examined FSGS in seven African and Neotropical populations of the late-successional rain forest tree Symphonia globulifera L. f. (Clusiaceae) to discriminate the influence of drift-dispersal vs. landscape/ecological features and historical processes on FSGS. We used spatial principal component analysis and Bayesian clustering to assess spatial genetic heterogeneity at SSRs and examined its association with plastid DNA and habitat features. African populations (from Cameroon and São Tomé) displayed a stronger FSGS than Neotropical populations at both marker types (mean Sp = 0.025 vs. Sp = 0.008 at SSRs) and had a stronger spatial genetic heterogeneity. All three African populations occurred in pronounced altitudinal gradients, possibly restricting animal-mediated seed dispersal. Cyto-nuclear disequilibria in Cameroonian populations also suggested a legacy of biogeographic history to explain these genetic patterns. Conversely, Neotropical populations exhibited a weaker FSGS, which may reflect more efficient wide-ranging seed dispersal by Neotropical bats and other dispersers. The population from French Guiana displayed an association of plastid haplotypes with two morphotypes characterized by differential habitat preferences. Our results highlight the importance of the microenvironment for eco-evolutionary processes within persistent tropical tree populations.
ISSN: 1932-6203

hal-01608324
https://hal.archives-ouvertes.fr/hal-01608324
DOI : 10.1371/journal.pone.0182515
PRODINRA : 403154
PUBMED : 28771629

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The N-S Languedoc volcanic province between the French Massif Central and the Mediterranean Sea is characterized by sporadic scattered low volume (similar to 2 km(3)) and geochemically homogeneous alkali basaltic activity spanning from 161 to 05 Ma The existence of magmatic activity of such a long duration within such a small area (similar to 140 km long and similar to 60 km wide) in spite of the extensive shift to the East of the European plate (about 2500 km during the last 160 Ma) is problematic Trace-element abundances in lavas suggest low degrees of melting (1-5%) in the spinet-garnet transition zone of an enriched Iherzolitic source The lavas display rather large ranges in Sr isotopic ratios (0 70307-0 70436) The Nd-143/Nd-144 ratio variations are smaller (0 51268-0 51300) and these of Pb-206/Pb-204 Pb-208/Pb-204 and Pb-207/Pb-204 are 18 745-19 515 38 53239 228 and 15 567-15 680 respectively The Languedoc lithospheric mantle as sampled by xenoliths is globally similar to the Pyrenees lithosphere The xenoliths show also rather large Sr Nd and Pb isotopic variations (Sr-87/Sr-86 0 70287-0 70578 Nd-143/Nd-144 0 51256-0 51414 Pb-208/Pb-204 37772-39 041 Pb-206/Pb-204 17 901-19 353) except for Pb-207/Pb-204 (15 570-15 620) The Pb-206/Pb-204 and La/Sm ratios are positively correlated both in xenoliths and lavas The increase of the Pb-206/Pb-204 (which could be interpreted as participation of the European Asthenospheric Reservoir EAR) is probably related to volatile-rich (carbonated?) fluid percolation This is corroborated by LILE and HFSE patterns observed in several xenoliths Therefore our data on lavas and xenoliths suggest a lithospheric origin for this long lived magmatism We propose (1) that the role of the asthenosphere in the Languedoc volcanism was restricted to volatile-rich fluid supplying and (2) that the fluid injection within the lithosphere may be related to the arrival of the Central Atlantic Plume head beneath Western Europe about 70 Ma ago In this model the isotopic signature of the oldest lavas (>70 Ma) would be that of the mantle lithosphere inherited from Hercynian processes The signatures of the subsequent lavas would be driven by the metasomatic component stored within the lithosphere and preferentially mobilized during incipient melting This metasomatised lower lithosphere was close to its solidus and small changes in P (or T) triggered incipient melting leading to basaltic volcanism Successive local re adjustments of the lithospheric blocks which accompanied the Meso-Cenozoic evolution of the Thetys Ligurian margin towards the present Mediterranean margin are the probable cause of these changes and so the sporadic volcanic activity in Languedoc is unrelated to deep asthenospheric processes
ISSN: 0024-4937

hal-00558884
https://hal.archives-ouvertes.fr/hal-00558884
DOI : 10.1016/j.lithos.2010.04.009

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
This paper presents the background for the calculation of various numbers that can be used to characterize crystal-preferred orientation (CPO), also known as texture in materials science, for large datasets using the combined scripting possibilities of MTEX and MatLab®. The paper is focused on three aspects in particular: the strength of CPO represented by orientation and misorientation distribution functions (ODFs, MDFs) or pole figures (PFs); symmetry of PFs and components of ODFs; and elastic tensors. The traditional measurements of texture strength of ODFs, MDFs and PFs are integral measurements of the distribution squared. The M-index is a partial measure of the MDF as the difference between uniform and measured misorientation angles. In addition there other parameters based on eigen analysis, but there are restrictions on their use. Eigen analysis does provide some shape factors for the distributions. The maxima of an ODF provides information on the modes. MTEX provides an estimate of the lower bound uniform fraction of an ODF. Finally, we illustrate the decomposition of arbitrary elastic tensor into symmetry components as an example of components in anisotropic physical properties. Ten examples scripts and their output are provided in the appendix.
Geological Society Special Publication

hal-01277689
https://hal.archives-ouvertes.fr/hal-01277689
DOI : 10.1144/SP409.8

Éditeur(s) : HAL CCSD Springer
Résumé : The analysis of three different regions of the South- Pyrenean fold-and-thrust belt reveals that during the Tertiary compression the hydrological system was compartmentalised in time and space. During the early-middle Eocene, when the thrust front affected marine soft-sediments in the Ainsa basin, the thrust fault zones were dominated by formation fluids derived from Eocene marine waters trapped in the underlying Eocene marls, although influences of meteoric waters were also present. During the middle-late Eocene, when the thrust front emplaced marine rocks over continental redbeds in the eastern Catalan basin (L'Escala thrust), the thrust fault zones were dominated by meteoric fluids. These fluids flowed preferentially along these faults, draining laterally the meteoric fluids and acting as barriers hindering their flowing towards more external parts of the belt. During the Oligocene, the most external part of the fold-and-thrust belt in the eastern Catalan basin developed on top of a salt detachment horizon. The thrust front affected continental materials of late Eocene-Oligocene age. At this moment, the thrusts were conduits for meteoric fluids arriving from the surface and also for evolved meteoric fluids migrating over short distance upwards after being in contact with the underlying evaporitic beds. Most of the fractures show a similar sequence of microfractures. Microfractures of stage 1 formed when the sediment was poorly lithified. Microfractures of stage 2 represent the main episode of vein formation which developed when a progressive induration of the host sediment occurred. During microfracture stage 3, formed in an extensional regime, the host sediment was more indurated. The repetition of this sequence of microfractures in different fracture generations of the same outcrop indicates that the sediment induration was restricted to the vicinity of the vein. Away from the veins, the sediment remained poorly lithified during the entire deformation cycle. Calcite cement within the host rock precipitated later than the syn-compressive veins, when the sediment was more indurated. Elemental geochemistry and stable isotopes of the calcite veins indicates that early generation of microfractures is infilled by local fluids (either marine or meteoric), whereas external fluids (meteoric or evolved meteoric) infilled the main compressive stage of microfractures. The hot temperature of these fluids (157°C to 183°C in the Atiart-Arro example) indicates their circulation through deep parts of the thrust belt. The progressive increase of the 87Sr/86Sr ratio through time is due to the progressive uplift, exposure and erosion of the internal Pyrenean Axial Zone.
Thrust belts and foreland basins, from fold kinematics to hydrocarbon systems

hal-00408001
https://hal.archives-ouvertes.fr/hal-00408001
DOI : 10.1007/978-3-540-69426-7_5