Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
ISSN: 0043-1648

hal-01679411
https://hal.univ-antilles.fr/hal-01679411
DOI : 10.1016/j.wear.2004.11.019

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Within the framework of the international field campaign COPS (Convective and Orographically induced Precipitation Study), a large suite of state-of-the-art meteorological instrumentation was operated, partially combined for the first time. This includes networks of in situ and remote-sensing systems such as the Global Positioning System as well as a synergy of multi-wavelength passive and active remote-sensing instruments such as advanced radar and lidar systems. The COPS field phase was performed from 01 June to 31 August 2007 in a low-mountain area in southwestern Germany/eastern France covering the Vosges mountains, the Rhine valley and the Black Forest mountains. The collected dataset covers the entire evolution of convective precipitation events in complex terrain from their initiation, to their development and mature phase until their decay. Eighteen Intensive Observations Periods with 37 operation days and eight additional Special Observations Periods were performed, providing a comprehensive dataset covering different forcing conditions. In this article, an overview of the COPS scientific strategy, the field phase, and its first accomplishments is given. Highlights of the campaign are illustrated with several measurement examples. It is demonstrated that COPS research provides new insight into key processes leading to convection initiation and to the modification of precipitation by orography, in the improvement of quantitative precipitation forecasting by the assimilation of new observations, and in the performance of ensembles of convection-permitting models in complex terrain.
ISSN: 0035-9009

hal-00565513
https://hal.archives-ouvertes.fr/hal-00565513
DOI : 10.1002/qj.752

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The structural parameters of fluorinated nanocarbons presenting different shapes, i.e. spherical, tubular and discotic are investigated and correlated to their tribological properties. Different fluorination rates of graphitized carbon blacks (0D), carbon nanofibres (1D) and a mixture of carbon nanodiscs and nanocones (2D) were achieved under pure molecular fluorine gas flow (direct fluorination). Raman spectrometry, X-ray diffraction and 19F solid state nuclear magnetic resonance underline similar structure and nature of the C-F bonds (covalent) for equivalent fluorine contents. In spite of the similarities of physical-chemical properties at equivalent fluorine contents, the tribological properties of the fluorinated nanocarbons differ. Those properties are discussed taking into account the role of the fluorine content and location of the fluorine atoms in the decrease of the interparticle interactions and in the cleavage of the external fluorocarbon layers to form the tribofilm. Finally, the effect of the shape is discussed.
ISSN: 0022-1139

hal-00787267
https://hal.archives-ouvertes.fr/hal-00787267

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
ISSN: 1023-8883

hal-01680425
https://hal.univ-antilles.fr/hal-01680425
DOI : 10.1007/s11249-014-0421-1

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
ISSN: 1023-8883

hal-01685764
https://hal.univ-antilles.fr/hal-01685764
DOI : 10.1007/s11249-014-0421-1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Low Density Polyethylene (LDPE) films were treated by direct fluorination at different conditions, i.e. static and dynamic ones. Modification of the treated films chemical composition was studied by spectroscopic methods (solid state NMR, XPS and infrared spectroscopy). Surface morphology was investigated by SEM and AFM. Also surface energy measurements and electron paramagnetic resonance (EPR) were carried out. Direct fluorination resulted in printability, barrier properties towards O2 and tribological properties enhancement. On the contrary, the barrier properties towards water, initially good, were not improved but maintained.
ISSN: 0257-8972

hal-01324133
https://hal.archives-ouvertes.fr/hal-01324133
DOI : 10.1016/j.surfcoat.2016.03.021

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The tribologic properties of graphitized carbon blacks and their fluorinated derivatives are investigated as a function of the fluorination rate. Very low intrinsic friction coefficients are obtained for highly fluorinated compounds. The correlation of the tribologic results and structural investigations of the initial compounds by TEM strongly suggests that the friction mechanisms involve surface effects in the early stage of friction. Long-term tribologic experiments and Raman analyses point out an evolution of the structure and composition of the tribofilms during the friction process leading to similar friction properties of the tribofilms. Wear studies revealed that highly fluorinated derivatives appear less efficient than pristine and weakly fluorinated compounds.
ISSN: 1023-8883

hal-01121785
https://hal.archives-ouvertes.fr/hal-01121785
DOI : 10.1007/s11249-014-0406-0

Éditeur(s) : HAL CCSD Cambridge University Press (CUP)
Résumé : International audience
ISSN: 1431-9276

hal-01680427
https://hal.univ-antilles.fr/hal-01680427
DOI : 10.1017/S1431927614010654

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
ISSN: 0022-1139

hal-01085995
https://hal.archives-ouvertes.fr/hal-01085995
DOI : 10.1016/j.jfluchem.2014.09.021

Éditeur(s) : HAL CCSD
Résumé : International audience
In boundary lubrication regime, friction reduction and antiwear processes are associated to the presence of additives in the lubricating oils or greases. These processes are due to the formation of protective tribofilms resulting from chemical reactions between the additives and the sliding surfaces, in the physico-chemical conditions of the sliding contact. Conventional antiwear additives mainly consist of transition metal organo phosphate or thiophosphates which present a remarkable efficiency in the case of contacts between ferrous alloys. In the case of non reacting surfaces, these additives become inactive. Recently developped lubrication strategies consist in the use of dispersion in oils of nano additives able to build the protective tribofilm in the sliding contact without reaction with the surfaces. Carbon fluorinated phases, due to their lamellar structure and their high chemical stability even at relatively high temperature (400°C) represent interesting candidates as lubricant nano-additives subjected to present friction reduction, anti wear and anti corrosion actions. This work presents the tribologic behaviour of some carbon fluorinated derivatives such as graphite fluorides, fluorinated carbon nanofibers, fluorinated carbon nanodiscs and fluorinated carbon blacks. The influence, on the tribologic performances, of the structure of the initial carbon phases, of the fluorination rate (0
World Tribology Congress 2013
Torino, Italy

Droits : info:eu-repo/semantics/OpenAccess
hal-00926514
https://hal.archives-ouvertes.fr/hal-00926514
https://hal.archives-ouvertes.fr/hal-00926514/document
https://hal.archives-ouvertes.fr/hal-00926514/file/Delbe_9783.pdf
OATAO : 9783

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
This work is concerned with the study of the tribologic properties of room temperature fluorinated graphite heat-treated under fluorine atmosphere. The fluorinated compounds all present good intrinsic friction properties (friction coefficient in the range 0.05–0.09). The tribologic performances are optimized if the materials present remaining graphitic domains (influenced by the presence of intercalated fluorinated species) whereas the perfluorinated compounds, where the fluorocarbon layers are corrugated (armchair configuration of the saturated carbon rings) present higher friction coefficients. Raman analyses reveal that the friction process induces severe changes in the materials structure especially the partial re-building of graphitic domains in the case of perfluorinated compounds which explains the improvement of μ during the friction tests for these last materials.
ISSN: 1023-8883

hal-00767637
https://hal.archives-ouvertes.fr/hal-00767637
https://hal.archives-ouvertes.fr/hal-00767637/document
https://hal.archives-ouvertes.fr/hal-00767637/file/Delbe_6329.pdf
DOI : 10.1007/s11249-009-9487-6

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The decay of 187Re to 187Os provides a unique tracer of recycled lithosphere in the Earth's upper mantle, and the radiogenic Os isotope compositions of many mid-ocean ridge basalts (MORB) have been taken to indicate the presence of recycled oceanic crust in the mantle source. However, others have attributed the data to contamination by seawater or an age effect (due to 187Re decay following igneous crystallisation). This study presents new Re Os, U Th Ra and B isotope data for normal-MORB (N-MORB) glass (including 18 samples analysed previously). The scale of the variation in 187Os/188Os observed here in N-MORB glass ranges from 0.126 to 0.148, with a mean value of 0.133 ± 0.009 (2?). Previously published Os isotope data for MORB is shown to have been affected by an analytical artefact, and in particular the very radiogenic Os isotope compositions reported earlier are now shown not to exist. Nevertheless, some radiogenic Os isotope compositions are still seen in the data obtained here. Coupled Th and Ra excesses appear to rule out an age effect, at least, for those samples studied, however, ?11B covariations with 187Os/188Os are consistent with the assimilation of older oceanic crust (affected by seawater contamination). Individual sulphides (less likely to be affected by such contamination) are always less radiogenic than their glass host, with 187Os/188Os values ranging from 0.123 to 0.131. This indicates that sulphide precipitation occurred prior to contamination of the surrounding melt, but the data also suggest that low-Os sulphides have been affected by contamination through partial equilibration with that melt. Taken together, these indicate that dominant process responsible for the radiogenic Os isotope compositions of N-MORB glass is contamination by older oceanic crust. Although the influence of age effects and the presence of recycled material cannot be completely ruled out, Os-rich sulphides yield sub-chondritic Os isotope compositions which point rather to a long-term depletion in Re in the MORB source likely to have resulted from formation of the continental crust over much of Earth's history.
ISSN: 0012-821X

hal-00320075
https://hal.archives-ouvertes.fr/hal-00320075
DOI : 10.1016/J.EPSL.2007.05.014

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
ISSN: 0305-7453

hal-01470808
https://hal.archives-ouvertes.fr/hal-01470808
DOI : 10.1093/jac/dkw352
PUBMED : 27609051

Éditeur(s) : HAL CCSD
Résumé : International audience
OBJECTIVE: To assess sperm production and aneuploidy in Hodgkin lymphoma (HL) and non-Hodgkin lymphoma (NHL) before and after treatments. DESIGN: Multicenter, prospective, longitudinal study of lymphoma patients analyzed before treatment and after 3, 6, 12, and 24 months. SETTING: University hospitals. PATIENT(S): Forty-five HL and 13 NHL patients were investigated before and after treatment. Treatment regimens were classified in two groups: ABVD (doxorubicin, bleomycin, vinblastine, dacarbazine) with or without (+/-) radiotherapy, and CHOP (doxorubicin, cyclophosphamide, vincristine, prednisone)/MOPP-ABV (mechlorethamine, oncovin, procarbazine, prednisone-doxorubicin, bleomycin, vinblastine). A control group of 29 healthy men was also studied. INTERVENTION(S): Semen analyses and aneuploidy study by FISH were performed at each time point. MAIN OUTCOME MEASURE(S): Comparison of mean sperm characteristics and percentage of sperm aneuploidy rates before and after treatment. RESULT(S): Before treatment, HL and NHL men had altered semen characteristics and higher sperm aneuploidy rates (median 0.76 [interquartile range 0.56-0.64]) than the control group (0.54 [0.46-0.74]). After treatment, sperm production was significantly lowered 3 and 6 months after ABVD +/- radiotherapy or CHOP/MOPP-ABV. After ABVD +/- radiotherapy, the aneuploidy rate increased significantly only at 3 months, and values obtained 1 or 2 years later were lower than pretreatment values. In contrast, in the CHOP/MOPP-ABV treatment group, semen characteristics and aneuploidy rate did not return to normal levels until 2 years after treatment. CONCLUSION(S): Lymphoma itself has consequences on sperm aneuploidy frequency before treatment. Moreover, lymphoma treatments have deleterious effects on sperm chromosomes related to treatment type and time since treatment. Patient counseling is essential concerning the transient but significant sperm aneuploidy induced by lymphoma and its treatments.
Fertility and sterility

hal-01477204
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01477204
DOI : 10.1016/j.fertnstert.2016.10.001
PUBMED : 27810161

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The present work is concerned with the study of the tribological properties of various fluorinated carbon phases obtained at room temperature and then post-treated under fluorine atmosphere at different temperatures. The tribological tests evidence good intrinsic properties for all the compounds (friction coefficient in the range 0.07-0.09). Differences appear after few cycles. Friction measurements after 100 cycles and complementary Raman analyses of the tribofilm remaining in the wear scar point out that long term tribologic properties of the fluorinated compounds strongly depend on the evolution undergone by the materials under friction. The release of HF molecules, the loss of fluorine and partial rebuilding of graphitic phases are at the origin of the degradation of the friction properties. The good properties of the compounds post-treated at temperature in the range 150-300 °C are attributed to the chemical and structural stability of these compounds under friction.
ISSN: 0022-3697

hal-00756133
https://hal.archives-ouvertes.fr/hal-00756133
https://hal.archives-ouvertes.fr/hal-00756133/document
https://hal.archives-ouvertes.fr/hal-00756133/file/Delbe_6346.pdf
DOI : 10.1016/j.jpcs.2006.01.084

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The thermal evolution of sediments in the shallowest part of sedimentary basins is challenging to investigate as most of the geothermometers are at their application limits. This is typically the case of the Callovian-Oxfordian claystones at the eastern border of the Paris Basin. A recent 2000 m deep well penetrated the entire Jurassic and Triassic sedimentary series and permitted coring of sediments never reached by previous drilling in this part of the basin. Thanks to the use of several independent geothermometers (apatite fission track thermochronology, fluid inclusion microthermometry, clay mineralogy and sedimentary organic matter evolution) the burial history of the Mesozoic series has been reconstructed, modeled and calibrated using kinetic algorithms relevant to the various paleothermometers used. In addition to these conventional methods, an innovative approach was developed using the temperature-dependence of the magnetic mineral assemblage within clay-rich sediments ("MagEval"). Thermal modeling indicates that the Callovian-Oxfordian and the Lower Triassic experienced maximum burial temperatures of 50 +/- 5 C-circle and 90 +/- 10 C-circle respectively, i.e., about 25 C higher than present-day. This temperature offset implies the erosion of several hundred meters of sediments which, depending on the thermal flux and conductivity considered, most likely constituted Upper Cretaceous chalk deposits. Falling sea level resulted in the exposure and subsequent dismantling of the chalk cover at the beginning of Cenozoic times. The eastern border of the basin was then subjected to slow erosion and discrete tectonic deformation.
ISSN: 0264-8172

hal-01313142
https://hal.archives-ouvertes.fr/hal-01313142
DOI : 10.1016/j.marpetgeo.2013.08.019

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
ISSN: 0257-8972

hal-01679413
https://hal.archives-ouvertes.fr/hal-01679413
DOI : 10.1016/j.surfcoat.2016.03.021