Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present a new set of brittle microtectonic measurements carried out in the Pliocene and Quaternary rocks outcropping in several key sectors of the western Betic and Rif orogen, the so-called Gibraltar orogenic arc. This data set, along with available earthquake focal mechanisms and borehole breakouts, allowed us to compile the Pliocene and Quaternary stress map of this area. This map provides new constraints for tectonic models and the present-day tectonic activity of the proposed active eastward subduction of oceanic lithosphere beneath the Gibraltar Arc and roll-back. The horizontal maximum compressive stress (S-Hmax) is NW-SE in the Betic Orogen and N-S/NNW-SSE in the southern Rif Cordillera. There is a significant consistency between S-Hmax and the displacement field deduced from GPS measurements with respect to the African plate: both appear to reflect the NW-SE convergence between the African and the European plates that is perturbed in the Rif. We propose that part of the eastern Rif behaves as a quasi-rigid block welded to the stable African plate. This block is bounded by important faults that localized most of the deformation disturbing the stress and surface displacement field. Pliocene to Quaternary N-S to NW-SE Africa-Europe plate convergence seem to be associated to the reorganization of the remnant Early Miocene subduction system in a continental-continental collision framework. Three-dimensional reconstruction of available seismic tomography plotted against the intermediate seismicity shows that only part of the old subduction system, whose orientation ranges from N20 degrees E to N100 degrees E, remains active: the portion ranging from N30 degrees E to N40 degrees E, orthogonal to the regional convergence. (C) 2011 Elsevier Ltd. All rights reserved.
ISSN: 0264-3707

hal-00671033
https://hal.archives-ouvertes.fr/hal-00671033
DOI : 10.1016/j.jog.2010.12.003

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Mélange rocks outcrop widely in the central and western frontal sectors of the Betic Cordillera, as in many other collisional orogens where they form part of the accretionary wedges. Extrusion of Triassic plastic clays and evaporites was favored by the progressive accretion of the Betic External Zones, mixing rocks of different provenance and forming a synorogenic frontal mélange unit. MT data coupled with gravity data are a valid combined methodology to characterize the geometry of these mélange units, since the characterization of plastic rocks geometry is usually uncertain using seismic techniques. The results correlate well with known geological features (sedimentary basins, calcareous ranges, evaporitic rocks) and reveal the deep geometry. A resistive body, slightly dipping toward the SE, points to the continuity of the Iberian Massif below the Guadalquivir basin (2°) and the External Zones (6-8°). To the south, gravity models show the Iberian continental crust subducting below the Internal Zones with a roughly 20-35° slope. The main conductive bodies are related to the location of evaporitic rocks involved in the frontal mélange. They overlie the Iberian Massif and, southwards, the frontal Jurassic and Cretaceous limestone sequences of the External and Median Subbetics. In this setting, thick plastic rock units placed above the foreland could act as a lubricant facilitating continental subduction, and being progressively accreted toward a frontal mélange.
ISSN: 1525-2027

hal-00750364
https://hal.archives-ouvertes.fr/hal-00750364
DOI : 10.1029/2012GC004153

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The nucleation, propagation, and associated folding of ramp-flat-ramp normal faults were analyzed from field examples developed in a brittle/ductile multilayer sequence of the Huércal-Overa Basin (SE Spain). Gently dipping sandy silt layers, which display a low cohesive strength (C0 = 7 kPa, μ = 34°), favor the development of extensional detachments. A tectonic origin instead of a possible gravitational origin is supported by the perpendicularity between the paleoslope direction of the fluvial-deltaic environment inferred from imbricated pebbles, and the senses of movement deduced from fault slicken-lines. The link between high-angle normal faults (HANFs) --formed at different levels in the layered sequence-- with horizontal fault segments comes to develop ramp-flat-ramp normal faults with associated roll-over in the hanging wall. Observed extensional duplexes are formed by parallel detachments connected through synthetic Riedel faults. These Riedel faults would produce the back-rotation of the individual blocks (horses), i.e., extensional folding of the originally subhorizontal layers. There is no correlation between the analyzed ramp-flat-ramp normal faults, accommodating south-southeastward extension during Serravallian-lower Tortonian, and either the regional Alpujarride/Nevado-Filabride west-directed extensional shear zone or the top-to-the-north detachments within Alpujarride units, which are clearly sealed by Serravallian-lower Tortonian sediments. Therefore, the studied normal faults are restricted to the brittle/ductile multilayer fluvio/deltaic sequence and accommodate moderate late extension instead of belonging to a large crustal extensional system connected with a regional detachment at depth. Therefore, the basin formed in a moderate crustal thickness context where small and medium-scale extensional systems were subordinate structures. These natural examples support the development of low-angle normal faults at very shallow crustal levels in multilayer sequences with suitable rheological conditions.
ISSN: 0278-7407

hal-00750352
https://hal.archives-ouvertes.fr/hal-00750352
DOI : 10.1029/2012TC003130

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
A NE-SW magnetotelluric 110 km-long profile including 18 sites was acquired across the western Rif Cordillera along the Eurasian-African plate boundary, allowing to constrain its poorly known deep structure. It extends from the Internal Zones, close to the Alboran coast, crossing the External Zones and up to the Gharb foreland basin. The periods recorded range from 0.001 s to 1000 s. The combination of magnetotelluric data with available geological data provides new insight regarding the relationship between deep and shallow crustal structures of the Rif Cordillera. Analyses of structural dimensionality suggest a preferential NW-SE direction, and a 2D joint inversion was performed. A 3D inversion extending the 2D model along the strike confirmed the reliability of this approach. The magnetotelluric model shows a heterogeneous upper crust in agreement with the geological structures observed at surface. The Internal Zones correspond to resistive (metamorphic rocks) and conductive (peridotites) bodies, while the External Zones and the foreland basin are characterized by large conductive bodies of variable thickness. A crustal detachment level separating shallow geological units from a probable variscan basement was inferred. At depth, the most relevant feature consists of large resistive bodies with a shallow irregular top, located below the frontal part of the Rif. The outcrops of exotic metapelitic, granitic and gneissic blocks in the frontal part of the Cordillera suggest that these large resistive bodies may correspond to a gneissic or granitic basement surrounded by metapelitic rocks. Late contractive thrust and diapiric processes were responsible for their uplift and shallow emplacement. The Rif constitutes an active southwestward vergent orogenic wedge, oblique to the present-day NW-SE convergent Eurasian-African plate boundary.
ISSN: 1525-2027

hal-00670999
https://hal.archives-ouvertes.fr/hal-00670999
DOI : 10.1029/2011GC003783

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Iberian Massif is the best exposed segment of the European Variscan Belt. It includes relatively well preserved terranes that were accreted by transpression along time and resulted in a number of geotectonic units that formed part of the Late Paleozoic assembly of the Pangaea Supercontinent. In SW Iberia, these units are the Central Iberian Zone (CIZ), Ossa Morena Zone (OMZ), and the South Portuguese Zone (SPZ). A 210 km long NE-SW magnetotelluric profile was carried out through the CIZ, from the OMZ-CIZ boundary toward the north, reaching the Tagus (Cenozoic) basin. Data dimensionality analysis resulted in a suitable 2-D electrical resistivity structure, allowing a 2-D inversion of the data set. Complementary available geophysical data (deep seismic, gravity and aeromagnetic) and a comparison with a detailed geological cross section led us to constrain the interpretation of the 2-D electrical resistivity structure of the CIZ crust. The results show, for the upper crust, the existence of diverse conductive/resistive bodies that correlate well with known geological features (sedimentary basins, faults, granitic plutons, mineralized systems). A mild but steady conductive band is located along the middle and lower crust that is interpreted as a mafic granulite basement. The upper section of this band connects with several elongated shallow conductors, providing further evidence for the existence, in the Central Iberian Zone, of a complex decollement system where the major faults are rooted. Such a crustal architecture is viewed as the northward continuation of the Variscan large-scale structures previously recognized in the southern sectors (OMZ and SPZ).
ISSN: 0148-0227

hal-00671036
https://hal.archives-ouvertes.fr/hal-00671036
DOI : 10.1029/2010JB007538

Éditeur(s) : HAL CCSD Royal Society
Résumé : International audience
The 2 465 177 bp genome of Sulfolobus islandicus LAL14/1, host of the model rudivirus SIRV2, was sequenced. Exhaustive comparative genomic analysis of S. islandicus LAL14/1 and the nine other completely sequenced S. islandicus strains isolated from Iceland, Russia and USA revealed a highly syntenic common core genome of approximately 2 Mb and a long hyperplastic region containing most of the strain-specific genes. In LAL14/1, the latter region is enriched in insertion sequences, CRISPR (clustered regularly interspaced short palindromic repeats), glycosyl transferase genes, toxin-antitoxin genes and MITE (miniature inverted-repeat transposable elements). The tRNA genes of LAL14/1 are preferential targets for the integration of mobile elements but clusters of atypical genes (CAG) are also integrated elsewhere in the genome. LAL14/1 carries five CRISPR loci with 10 per cent of spacers matching perfectly or imperfectly the genomes of archaeal viruses and plasmids found in the Icelandic hot springs. Strikingly, the CRISPR_2 region of LAL14/1 carries an unusually long 1.9 kb spacer interspersed between two repeat regions and displays a high similarity to pING1-like conjugative plasmids. Finally, we have developed a genetic system for S. islandicus LAL14/1 and created ΔpyrEF and ΔCRISPR_1 mutants using double cross-over and pop-in/pop-out approaches, respectively. Thus, LAL14/1 is a promising model to study virus-host interactions and the CRISPR/Cas defence mechanism in Archaea.
ISSN: 2046-6390

hal-00818894
https://hal.archives-ouvertes.fr/hal-00818894
DOI : 10.1098/rsob.130010
PUBMED : 23594878

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy C - Option B
Résumé : International audience
We report the characterization of a DNA primase/ polymerase protein (PolpTN2) encoded by the pTN2 plasmid from Thermococcus nautilus. Sequence analysis revealed that this protein corresponds to a fusion between an N-terminal domain homologous to the small catalytic subunit PriS of heterodimeric archaeal and eukaryotic primases (AEP) and a C-terminal domain related to their large regulatory subunit PriL. This unique domain configuration is not found in other virus-and plasmid-encoded primases in which PriS-like domains are typically fused to different types of helicases. PolpTN2 exhibited primase, polymerase and nucleotidyl transferase activities and specifically incorporates dNTPs, to the exclusion of rNTPs. PolpTN2 could efficiently prime DNA synthesis by the T. nautilus PolB DNA polymerase, suggesting that it is used in vivo as a primase for pTN2 plasmid replication. The N-terminal PriS-like domain of PolpTN2 exhibited all activities of the full-length enzyme but was much less efficient in priming cellular DNA polymerases. Surprisingly, the N-terminal domain possesses reverse transcriptase activity. We speculate that this activity could reflect an ancestral function of AEP proteins in the transition from the RNA to the DNA world.
ISSN: 0305-1048

Droits : http://creativecommons.org/licenses/by/
hal-01332620
http://hal.upmc.fr/hal-01332620
http://hal.upmc.fr/hal-01332620/document
http://hal.upmc.fr/hal-01332620/file/Nucl.%20Acids%20Res.-2014-Gill-3707-19.pdf
DOI : 10.1093/nar/gkt1385

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
New magnetotelluric and receiver transfer function studies provide insights from the upper to the lower crust of the eastern Betic Cordillera, which is deformed by large folds, normal faults, and a major transcurrent left-lateral fault, the Carboneras Fault Zone (CFZ). Receiver function analysis determines a NNW dipping Moho reaching 20 degrees that increases in depth, from 20 km south of the CFZ up to 34 km in the Sierra de Los Filabres. In addition, seismic discontinuities determined in the upper crust are interpreted as major contacts between metamorphic complexes that are detached and folded. The MT inversion model reveals a conductive zone, also representing a crustal seismic discontinuity, associated with the Alpujarride/Nevado-Filabride contact and fitting the N vergent geometry of the Sierra Alhamilla antiform. A small flexure at Moho coincides with the CFZ, as revealed by the Bouguer anomaly trend, in agreement with the receiver function results. Moreover, the Bahr strike and tipper angle at the stations placed closest to the CFZ clearly reveal the continuity of the CFZ at least down to approximately 15 km in depth, crossing all the detected crustal discontinuities up to the Moho. The lack of a clear Moho offset associated with the Carboneras Fault supports the idea that some large strike-slip faults tend to accommodate the deformation by a broadening fault zone at lower crustal levels. Its nucleation could occur at the base of a thin crust, where melting processes critically reduced the lithospheric strength during the late Miocene, to then propagate upward, reaching the topographic surface. Northward, the lithosphere comprised moderately larger strength, and the crustal discontinuities favored the development of larger folds with kilometric amplitude instead of strike-slip faults since the late Miocene.
ISSN: 1525-2027

hal-00671024
https://hal.archives-ouvertes.fr/hal-00671024
DOI : 10.1029/2010GC003274

Éditeur(s) : HAL CCSD
Résumé : International audience
El objetivo de esta lámina es presentar, para las regiones próximas a Quito, documentos que integran el componente humano del riesgo ligado al volcán Cotopaxi. Tales documentos complementan el mapa de las amenazas potenciales del volcán Cotopaxi que no proporciona sino el componente físico (tipos de peligros, magnitud, extensión potencial de los productos y probabilidad de ocurrencia).
Le but de cette planche est de présenter, pour les régions proches de Quito, des documents intégrant la composante humaine du risque lié au volcan Cotopaxi. Ces documents sont complémentaires de la carte des menaces potentielles du volcan Cotopaxi qui n’en fournit que la composante physique (types d’aléas, magnitude, extension potentielle des produits et probabilité d’occurrence).
Atlas infographique de Quito: socio-dynamique de l'espace et politique urbaine. Atlas Infográfico de Quito : socio-dinámica del espacio y política urbana.

Droits : info:eu-repo/semantics/OpenAccess
hal-01194891
https://hal.archives-ouvertes.fr/hal-01194891
https://hal.archives-ouvertes.fr/hal-01194891/document
https://hal.archives-ouvertes.fr/hal-01194891/file/D%27Ercole%201992%20-%20La%20poblaci%C3%B3n%20de%20la%20provincia%20de%20Pichincha%20frente%20al%20volc%C3%A1n%20Cotopaxi..pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The contourite depositional system (CDS) along the southwestern Iberian Margin (SIM), within the Gulf of Cadiz and offshore areas of western Portugal bear the unmistakable signal of Mediterranean Outflow Water (MOW) exiting the Strait of Gibraltar. This locality records key information concerning the effects of tectonic activity on margin sedimentation, the effects of MOW dynamics on Atlantic circulation, and how these factors may have influenced global climate. Over the last four decades, numerous studies have been conducted on the late Miocene, Pliocene and Quaternary sedimentary stacking pattern of Neogene basins along the SIM for both academic and resources exploration purposes. However, understanding of the region rests primarily on basic seismic stratigraphy calibrated with limited data from only a few exploration wells. The Integrated Ocean Drilling Program (IODP) Expedition 339 recently drilled five sites in the Gulf of Cadiz and two sites on the western Iberian margin. The integration of core and borehole data with other geophysical databases leads us to propose a new stratigraphic framework. Interpretation of IODP Exp. 339 data along with that from industry sources and onshore outcrop analysis helps refine our understanding of the SIM's sedimentary evolution.We identify significant changes in sedimentation style and dominant sedimentary processes, coupled with widespread depositional hiatuses along the SIM within the Cadiz, Sanlucar, Doñana, Algarve and Alentejo basins. Following the 4.5 Ma cessation of a previous phase of tectonic activity related to the Miocene–Pliocene boundary, tectonics continued to influence margin development, downslope sediment transport and CDS evolution. Sedimentary features indicate tectonic pulses of about 0.8–0.9 Ma duration with a pronounced overprint of ~ 2–2.5 Ma cycles. These more protracted cycles relate to the westward rollback of subducted lithosphere at the convergent Africa-Eurasia plate boundary as its previous NW–SE compressional regime shifted to a WNW–ESE direction. Two major compressional events affecting to the Neogene basins at 3.2–3 Ma and 2–2.3 Ma help constrain the three main stages of CDS evolution. The stages include: 1) the initial-drift stage (5.33–3.2 Ma) with a weak MOW, 2) a transitional-drift stage (3.2–2 Ma) and 3) a growth-drift stage (2 Ma-present time) with enhanced MOW circulation into the Atlantic and associated contourite development due to greater bottom-current velocity. Two minor Pleistocene discontinuities at 0.7–0.9 Ma and 0.3–0.6 Ma record the effects of renewed tectonic activity on basin evolution, appearing most prominently in the Doñana basin. Several discontinuities bounding major and minor units appear on seismic profiles. Quaternary records offer the clearest example of this, with major units of about 0.8–0.9 Ma and sub-units of 0.4–0.5 Ma. Sedimentation is controlled by a combination of tectonics, sediment supply, sea-level and climate. This research identifies time scales of tectonic controls on deep-marine sedimentation, specifically over periods of 2.5–> 0.4 Ma. Shorter-term climatic (orbital) mechanisms control sedimentation at time scales of ≤ 0.4 Ma. The role of bottom water circulation and associated processes in shaping the seafloor and controlling the sedimentary stacking pattern on continental margins has to be seriously reconsidered in future multidisciplinary studies. This is not only because of the common occurrence of sandy contourite deposits in deep water setting and their economic interest for hydrocarbon exploration, but principally because they archive the heartbeat of the interior Earth and therefore have important sedimentary and paleoceanographic implications.
ISSN: 0025-3227

hal-01356166
https://hal.archives-ouvertes.fr/hal-01356166
DOI : 10.1016/j.margeo.2015.09.013

Éditeur(s) : HAL CCSD Universidad Complutense de Madrid
Résumé : Based on new seismological and recent faulting data, we analyze five main sectors in the western part of the Betic Cordillera from an active tectonic perspective: i. The northwestern frontal sector of the cordillera, including the Morón de la Frontera area, with shallow (< 15 km depth) seismogenic active NE-SW reverse and strike-slip faults that do not reach the surface. ii. The Teba area, in the External Zones, which is deformed by sparse N-S to NW-SE normal faults with associated wedges of Quaternary sediments and active strike-slip faults at intermediate crustal levels. iii. The Ronda Basin, representing the major Late Miocene intramontane basin of the western Betic Cordillera, is mainly deformed by NNE-SSW and WNW-ESE folds and locally by NW-SE normal faults. iv. The internal part of the orogen, which is characterized by shallow (<40 km) and intermediate (40 to 120 km depth) seismicity beneath Málaga and the Alborán Sea, ENE-WSW folding, relief uplift, river incision and scarce active faults with surface expression. v. The Spanish Atlantic coast, which coincides with the western end of the Betic orogen, where Pliocene to Quaternary shallowmarine sedimentary rocks are deformed by meso-scale NW-SE oriented normal faults and few ENE-WSW reverse faults. These data support the recent tectonic activity of the western Betic Cordillera determined by the NW-SE Eurasian-African convergence with variable features from the mountain front, characterized by shallow deformations, up to the Internal Zones that mainly undergo uplift and intermediate seismicity.
ISSN: 1698-6180

hal-00750359
https://hal.archives-ouvertes.fr/hal-00750359
DOI : 10.5209/rev_JIGE.2012.v38.n1.39211

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Active faults from the Campo de Dalías (SE Betic Cordillera) allow us to constrain the deformation styles involved in the development of segmented oblique-slip faults. This sector constitutes the widest outcrop of Plio-Quaternary sediments in the northern boundary of the Alboran Sea. It has emerged since the Late Pliocene, and therefore provides recent deformation markers that are not disturbed by erosive processes. The faults started to grow during the Pleistocene, reactivating previous hybrid joints, with a normal-dextral slip. We present a detailed map of the largest fault in the area, the Loma del Viento fault, comprising six onshore segments. Based on field work and aerial photography, the distributions of the contiguous joints have been mapped, and the joints reactivated as faults are identified. Some of these fault segments are hard-linked, and fault slip enhances toward the linkage sectors between them with associated sedimentary depocenters. An electrical tomography profile reveals the wedge geometry of a unit of Pleistocene conglomerates and red silts that were coevally deposited during the fault movement. Long-term slip rate in the central part of the fault is estimated at 0.07 ± 0.03 mm/y. In addition, a seismic crisis nucleated close to the Loma del Viento fault during November 2010 was recorded. Moment tensor analysis of the two mainshocks (Mw 3.5 and 4.2) provides a focal solution indicating a N120°E striking right-lateral strike-slip fault. The corrugated morphology of the Loma del Viento fault may have influenced its seismic behavior. Some of the fault segments are oblique to the general motion of the fault. These oblique segments would provide higher resistance against the general fault motion and could lock the fault, leading to accumulate elastic energy.
ISSN: 0040-1951

hal-00750357
https://hal.archives-ouvertes.fr/hal-00750357
DOI : 10.1016/j.tecto.2011.12.001

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
We analyze focal mechanisms of shallow-intermediate earthquakes in a NW-SE transect along the western Betic Cordillera and Alboran Sea, and deep earthquakes located in the central Betics to constrain the state of stress at the Gibraltar Arc slow convergence area. Shallow earthquakes (< 40 km) are preferably clustered at the mountain front. A general NW-SE horizontal compression is compatible with the convergence, and NW plunging compression axes are in agreement with frontal thrust activity. Toward the Alboran Sea the earthquakes are progressively deeper, reaching intermediate depths (40-120 km) near the coast and supporting the present-day activity of subduction only in this area. The Iberian continental crust concentrates most of the intermediate seismicity and is forced to partially sink into the mantle, probably through the pull of the oceanic slab. This downdip pull together with the buoyancy of the Iberian continental crust produces the slab curvature, downdip extension in the external arc of the continental slab, and downdip compression in the inner arc. T axes highly dipping to the southeast at 90-120 km depth occur at the oceanic/continental transition. Deep earthquakes (> 620 km) show very similar focal mechanisms, fitting the general slab behavior of resistance to further descent at the 660 km discontinuity. Seismicity features evidence the present-day stress distribution in a context of transition from subduction to continental collision.
ISSN: 1525-2027

hal-00669889
https://hal.archives-ouvertes.fr/hal-00669889
DOI : 10.1029/2011GC003824

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
without
ISSN: 0278-7407

hal-00464176
https://hal.archives-ouvertes.fr/hal-00464176
DOI : 10.1029/2009TC002527

Éditeur(s) : HAL CCSD Landes Bioscience
Résumé : International audience
In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
Autophagy

hal-00735751
https://hal.archives-ouvertes.fr/hal-00735751
PUBMED : 22966490

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Atlas Mountains are characterized by high elevations and Quaternary volcanism. Long period magnetotelluric data acquired along a NNW-SSE transect reveal the presence of a conductive anomalous mantle below the High Atlas. Data dimensionality analyses show a preferent N80 degrees E strike of the deep resistivity structure in agreement with the induction vector alignment at long periods. Accordingly, a 2D inversion of the data set was carried out. Large resistive bodies at the crustal basement most likely correspond to batholiths emplaced in more conductive metapelites. They are covered by outcropping conductive sedimentary detritic and carbonate rocks. Lithospheric thinning producing anomalous mantle and basin development in the Atlas probably started during Triassic-Jurassic rifting. Inversion tectonics since the Oligocene produced low shortening on previous lithospheric weak zones, with thrusting of the Atlas above the stable African plate. Melting at the top of the anomalous mantle is connected with Quaternary basaltic volcanism in the Middle Atlas.
ISSN: 0278-7407

hal-00671017
https://hal.archives-ouvertes.fr/hal-00671017
DOI : 10.1029/2010TC002859