Éditeur(s) : Université de Bucarest - Université de Bretagne occidentale
Résumé : This study is focusing on the architecture and recent sedimentary evolution of the Danube channel, the youngest channel-levee system in the Danube deep-sea fan. The study was conducted as part of the BlaSON French-Romanian Project, and combined high-resolution seismic-reflection profiles and chirp profiles with multibeam bathymetry and piston cores. This data set was acquired in 1998 during a joint survey IFREMER-GeoEcoMar of the north-western Black Sea. Previous seismic and acoustic data were also used. The Danube deep-sea fan is a large passive-margin mud-rich fan. Like the other systems of this type (Amazon fan, Mississippi fan or Indus fan) the Danube fan consists of stacked channel-levee systems intercalated with mass-transport deposits. Seismic and sedimentary facies in the Danube fan are similar to those identified in most of the mud-rich systems. Nevertheless, the Danube fan is distinguished by a specific feature: its development in a freshwater environment. This is due to the peculiar water-level history of the Black Sea controlled by the link to the Mediterranean through the Strait of Bosphorus and the Sea of Marmara. This connexion was successively interrupted (during sea level lowstands) and re-established (when the sea level was rising above the Bosphorus). Temporary absence of marine water influx during lowstands together with large freshwater inputs from the Danube and other major rivers changed the Black Sea into a freshwater lake during times of fan activity. This peculiarity possibly favourised the development of hyperpycnal flow at the Danube mouth and the initiation of turbidity currents in the deep-sea fan. The Danube channel is directly connected to the large shelf-indenting Danube canyon (also known as Viteaz canyon). The Danube canyon is deeply incised into the shelf margin for 26 km landward of the shelfbreak. During lowstands this canyon acted as the most important path for sediment supply to the deep sea in this part of the continental margin. It consists of a main trough with steep flanks, and a meandering thalweg cut into the flat canyon floor, attesting for the development of the canyon by erosion in the entrenched axial thalweg. Sections with specific morphology, orientation and gradient identified along the canyon, are interpreted as phases of landward expansion of the canyon. Internal structure of the canyon shows several erosional surfaces, which indicate that the present morphology of the canyon is the result of its polyphasic evolution. Instability in the zone of the canyon is related to the important sediment supply at the Danube mouth, to the presence of the gas in the surficial sediment, and possibly under a structural control. The upper part of the Danube channel (between the Danube canyon and ~1400 m depth) consists in a single leveed-channel that has undergone significant overbank deposition, as attested by the well-developed levees. The levees are strongly asymmetrical, being higher and wider on the right-hand side looking downstream. This type of asymmetry is rather common in deep-sea fans, and is generally attributed to the Coriolis effect (Menard, 1955). The channel is slightly sinuous, partially filled and incised by an entrenched thalweg, connected to the axial thalweg of the Danube canyon. Detailed seismic investigation inside the channel trough documented several depositional phases within the channel fill, separated by erosional surfaces. These surfaces are associated with distinct terraces identified on the multibeam bathymetry, that can be followed downward along the main trough axis. The valley fill deposits (where not removed by the subsequent erosional event) show an axial HAR (High Amplitude Reflections) seismic facies with lateral lower amplitude continuous reflections consisting in a levee facies, as proved by sampling. This indicates that filling up was associated with flow within the channel, and not with interruption of fan activity. On the middle slope below 1400 m, this single channel bifurcates through repeated avulsions. As a result, several highly meandering channels developed. The onlap relationships between these channels indicate that only one channel was active at a time. Each phase of avulsion resulted in a depositional unit consisting in a basal unchannelized lobe defined as High Amplitude Reflection Packets (HARP, Flood et al., 1991) that underlies a channel-levee system. The deposition of HARPs was associated with the readjustment of the longitudinal profile of the channel after the breaching of a levee, which resulted in remobilization of upslope channel deposits and eroded levees. When this adjustment was complete, erosion ceased and levees began to develop above the HARPs (Pirmez et al., 1997). All the identified phases of avulsion followed the same pattern: (1) breaching of the lower and narrower left levee; (2) building of a unit of High Amplitude Reflector Packets (HARP) basinward of the bifurcation point by the unchannelized flow, while the former channel was abandoned; and (3) initiation of a new meandering leveed channel. The northward migration of the resulting units through repeated bifurcations is influenced by the asymmetry between levees (hence by the Coriolis effect), and confined between the high levees of the initial phase of the Danube channel (to the south) and the steep relief of the Dniepr fan (to the north). Structure of the fan valley fill indicate that the erosional surfaces inside the upper channel could be formed in response of successive avulsions, by the adjustment of the longitudinal profile of the channel following the breaching of a levee wall. Sediments removed by erosion formed the HARP lobes basinward of the avulsion point. When this adjustment was complete, a channel-levee system developed downward of the bifurcation, overlying the HARPs, but also upward of this point, as a confined channel-levee system inside the erosional trough of the fan valley. Fluvial incisions identified on the continental shelf, together with the coastline location during the last active period of the Danube channel, indicated that the paleo-Danube was directed towards the head of the Danube canyon. Paleo-Danube mouth was fairly close (ca. 10 km) to the Danube canyon, supplying sediment to the Danube channel. Furthermore, hyperpycnal flow probably prevailed in the freshwater environment that characterized the Black Sea during times of fan activity. These conditions would have enabled the development of a quasi-continuous river-canyon-deep-sea fan system, ensuring the effective transfer of the sediment between the coastal zone and the deep sea.
Ce travail est consacré à l'étude de l'architecture et de l'évolution sédimentaire récente de l'éventail profond du Danube, en particulier de son dernier système chenal-levée: le chenal du Danube. L'étude a été réalisée dans le cadre du projet de coopération franco-roumaine BlaSON, à partir des données sismiques, bathymétriques-acoustiques et sédimentologiques acquises en 1998 lors d'une campagne en mer Noire réalisée par IFREMER et GeoEcoMar. Des données sismiques et acoustiques antérieures ont été également utilisées. L'éventail profond du Danube s'enserre dans la catégorie des grands éventails vaseux. Comme les autres systèmes de ce genre (tel que les éventails de l'Amazone, du Mississippi ou de l'Indus) il est constitué d'une succession de systèmes chenaux-levées intercalés avec des dépôts de transport en masse. Le fonctionnement de l'éventail était conditionné par la baisse du niveau marin lors des périodes glaciaires. Ses faciès sismiques et sédimentaires s'apparentent aux faciès qui caractérisent la plupart des éventails de ce type. L'éventail du Danube constitue néanmoins un cas particulier parmi les autres systèmes étudiés, du fait de son fonctionnement dans un bassin lacustre. Ceci est dû à la situation spécifique de la mer Noire dont la connexion avec la Méditerranée, par le détroit de Bosphore et la mer de Marmara, a été successivement interrompue (au cours de périodes de bas niveau) et reprise (quand le niveau marin remontait en dépassant le seuil du Bosphore). L'absence de l'apport d'eau salée pendant les périodes glaciaires, associée avec l'augmentation de l'apport fluvial, ont déterminé l'installation d'un milieu d'eau douce dans la mer Noire à chaque fois que la baisse du niveau permettait la reprise du fonctionnement de l'éventail profond. Cette situation particulière aurait favorisé la formation des courants hyperpycnaux à l'embouchure d'un fleuve du débit du Danube qui déversait ses eaux turbides dans un bassin lacustre, et aurait donc influencé l'apparition de courants de turbidité dans l'éventail profond. Le chenal du Danube s'est développé sur la pente continentale en prolongation du canyon du Danube (ou Viteaz) auquel il est directement connecté. Le canyon est incisé de manière significative (26 km) dans la plate-forme continentale. Au cours de bas-niveaux marins il constituait la principale voie de transfert des sédiments terrigènes vers le bassin profond dans cette partie de la marge. Le canyon est constitué par une entaille avec des flancs abrupts et un talweg axial incisé, qui montre l'importance du processus d'érosion du fond pour le développement du canyon. Les segments qui ont été identifiés le long du canyon, avec des morphologies, des orientations et des pentes spécifiques, sont interprétés comme des phases d'avancement du canyon vers la côte. Plusieurs incisions sont visibles dans la structure interne du canyon et témoignent que la morphologie actuelle du canyon est le résultat de son évolution polyphasée. L'instabilité de la zone du canyon est en relation avec les apports sédimentaires importants à l'embouchure du Danube, avec la présence du gaz dans les sédiments superficiels, et possiblement sous un contrôle structural. Sur la pente supérieure (entre le canyon du Danube et environ 1400 m de profondeur) le chenal du Danube présente des levées bien développées et fortement asymétriques, avec la levée droite plus haute et plus large que la levée gauche. Ce type d'asymétrie, fréquemment décrit dans les éventails profonds est généralement attribué à l'effet Coriolis (Menard, 1955). Le chenal est légèrement sinueux, partiellement comblé et incisé par un talweg axial qui représente la continuation sur la pente du talweg incisé dans le canyon du Danube. L'analyse sismique détaillée du remplissage de la vallée montre plusieurs phases de dépôt, séparées par des discontinuités érosives. Ces surfaces d'érosion correspondent à des terrasses emboîtées, relativement parallèles le long de la vallée, visibles dans la bathymétrie. Les dépôts qui constituent le remplissage du chenal présentent un faciès sismique de type HAR (High Amplitude Reflections) dans l'axe du chenal, partiellement (ou parfois totalement) enlevé par les phases d'érosion subséquentes, qui continue latéralement avec des réflexions litées correspondant à un faciès sédimentaire de levée. Le remplissage de la vallée a été donc associé avec des écoulements dans le chenal, et non pas avec l'interruption de son fonctionnement. Sur la pente inférieure, le chenal unique bifurque plusieurs fois par avulsion et forme de nouveaux systèmes chenaux-levées méandriformes. Ces systèmes se succèdent verticalement en onlap, ce qui montre qu'un seul chenal a été actif à la fois. Chaque phase d'avulsion a eu comme résultat la mise en place d'une unité constituée par un lobe défini comme "High Amplitude Reflection Packets" (HARP, Flood et al., 1991) à la base, et un système chenal-levée au sommet. Le dépôt d'un lobe HARP est associé avec de l'érosion dans le chenal en amont du point d'avulsion pour l'ajustement de son profil après la rupture de la levée. Quand le chenal a retrouvé son profil d'équilibre, l'érosion a cessé et des levées ont commencé à se développer au-dessus des HARPs (Pirmez et al., 1997). Toutes les phases d'avulsion se sont développées d'après le même modèle: (1) la rupture de la levée gauche, plus étroite; (2) le dépôt d'un lobe HARP par les écoulements non-chenalisés en aval du point d'avulsion, et l'abandon de l'ancien chenal; (3) l'initiation d'un nouveau système chenal-levée. La migration systématique du chenal vers le nord est influencée par l'assymétrie des levées (donc par la force de Coriolis), et confinée entre les grandes levées de la phase initiale du chenal du Danube, au sud, et le relief abrupt de l'éventail du Dniepr au nord. La structure sédimentaire du chenal du Danube indique que les surfaces érosives à l'intérieur du remplissage du chenal se seraient formées en réponse aux avulsions, du fait de l'ajustement du profil du chenal après la rupture d'une levée. Les sédiments du chenal érodés au cours de ce processus ont formé les lobes HARP. Quand le chenal a retrouvé son profil d'équilibre, un système chenal-levée s'est développé en aval du point d'avulsion au dessus du lobe HARP, mais aussi en amont de ce point, où il se trouve confiné dans la vallée érosive. Les incisions fluviatiles identifiés sur la plate-forme continentale et la position de la ligne de côte pendant la dernière période d'activité du chenal du Danube montrent que le paléo-Danube se dirigeait directement vers la tête du canyon du Danube. Son embouchure était située à proximité du canyon, qui alimentait le chenal du Danube. Cependant, les courants hyperpycnaux devaient prévaloir dans le milieu de salinité réduite qui caractérisait la mer Noire lors des périodes actives de l'éventail. Ces conditions auraient favorisé la mise en place d'un système quasi-continu fleuve-canyon-éventail profond, qui contrôlait le transfert des sédiments entre la côte et le bassin profond.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2002/these-1206.pdf
http://archimer.ifremer.fr/doc/00000/1206/

Éditeur(s) : Elsevier Sci Ltd
Résumé : A detailed morphological analysis of the outer shelf and continental slope of the Western Gulf of Lion is presented, based on swath bathymetry data together with sub-bottom profiles and high resolution seismic reflection profiles. These data reveal two main erosive features, of very different dimensions: the axial incision and the canyon's major valley. The height of axial incisions' flanks with respect to the canyon deepest point (the thalweg) ranges from 40 to 150 m. It creates a small axial erosive path within the canyon's major valley, which is typically bounded by flanks of more than 700 m in height. We interpret the axial incision observed in the sea floor as the imprint of turbidity currents that eroded the floor of canyons during phases of connection to rivers (hyperpycnal turbidity current). Such currents are most likely to have formed during the Last Glacial Maximum (LGM) as both proximity of the shoreline (due to the lowstand of sea level) and high detrital sediment supply (due to glacial abrasion upstream) increased the flow of sediments delivered to the canyon heads. Fossil axial incisions, observed in seismic lines, are related to equivalent conditions. The axial incision, however, has a key influence on canyon evolution as it triggers mass wasting of different sizes that affect the canyon's major valley (head and flanks). We interpret the geometry of the canyon's major valley as the result of recurrent activity of axial incisions. These periods of activity occurred during low sea levels at glacial maxima and show a cyclicity of 100,000 years for the last 400,000 years.
Marine And Petroleum Geology (0264-8172) (Elsevier Sci Ltd), 2005-06 , Vol. 22 , N. 6-7 , P. 805-826

Droits : 2005 Elsevier Ltd All rights reserved
http://archimer.ifremer.fr/doc/2005/publication-353.pdf
DOI:10.1016/j.marpetgeo.2005.03.011
http://archimer.ifremer.fr/doc/00000/353/

Éditeur(s) : HAL CCSD
Résumé : This work focus on the characterization of the source and dynamic of compactional fluids during sedimentary burial, through two complementary examples of late orogenic oil‐field half‐grabens: The exhumed Lodève Permian Basin and a deep buried Jurassic basin in the North Viking Graben (North Sea).Constituting the main part of the thesis, a multi‐disciplinary approach was conducted in the Lodève Basin where Ba‐F‐Cu‐Pb polymetallic mineralized systems are trapped into synrift faults and paleokarsts in the carbonate basement at the hinge point of the rollover. The source, timing and P/T conditions of fluid migration were deduced from the analysis of the microfabric, the fluid inclusions microthermometry, and the isotopic (Sr, S, O, H) and Rare Earth Element (REE) signature. Results are then crossed with a structural and thermal modeling that consolidates the sequence and dynamics of fluid during burial.A similar approach was conducted in the North Viking Graben where fluid markers are restricted to 3D seismic and well core data. Comparable Ba‐Pb‐Zn veins are reported in basin margin, plugging one of the most important siliciclastic hydrocarbon reservoir in the substratum. This analysis provides additional constraints on basinal fluid behavior and allows us to propose a global dynamic model for various compositions of fluids and reservoirs.We conclude to a polyphase fluid sequence history including:(a) In the carbonate basement of the Lodève Basin, karstic paleocanyon incisions and associated cavities coupled to synrift fault, act as major drain for fluids. These structures are early affected by hypogen‐sulfuric karstification in response to the interaction between bacterial oxidation of sulfides entrapped within Lower Permian blackshales and the basement oxidizing aquifer.(b) Disequilibrium compaction initiates overpressure‐driven basinal fluid migration towards basin margins, characterized by temperatures around 150‐180°C and salinities between 9 et 18wt%eq.NaCl. Isotopic (Sr, S, O) and REE analyses reveal that Ba‐M+‐rich mineralizing fluids derived mainly from buried blackshales diagenesis. External fluids coming from the lower crust are also identified that play a key role in fluorite precipitation by the leaching of late hercynian granites (mean temperature of 250°C and salinity > 20wt%eq.NaCl).(c) During the synrift period, fluid overpressure is responsible for the periodic reactivation of fault plane according to seismic‐valve process, bedded‐control shearing and hydraulic brecciation at the basement‐seal interface. These mechanisms induce cyclic polymetallic mineralization by the mixing between in‐situ formation water and deep ascending basinal fluids.(d) Thermogenic fluids expulsion starts with last basinal fluids during late burial stage. Hydrocarbons thus migrate along the same regional pathways up to the rollover crest, where they are partly rerouted by the previous mineralized baffle.(e) In the Lodève basin, post‐rift exhumation of the margins led to the remobilization of synrift deposits by subaerial biochemical processes at the sulfate‐methane transition. The latter results from the interaction between the still active hydrocarbon dysmigration with a playa lake sulfate‐rich aquifer. Secondary low‐temperature barite fronts precipitate then within basement meteoric karsts.In addition to the « source to sink » model of basinal fluids, this work provides new insights on the early plugging of hydrocarbon reservoirs and for the metallogenesis of Mississippi Valley‐Type deposits.
Ce travail porte sur la caractérisation de la source et de la dynamique des fluides de bassin au cours de leur chargement à travers deux exemples complémentaires de demi‐grabens tardi‐orogéniques pétroliers : Le Bassin Permien de Lodève, aujourd’hui à l’affleurement et un bassin jurassique enfouis dans le North Viking Graben (Mer du Nord).Le coeur de la thèse concerne le Bassin de Lodève où, à partir d’une approche pluridisciplinaire intégrée, nous avons caractérisé l’architecture des minéralisations (Ba, F, Cu, Pb) piégées dans un réseau paléokarstique alimenté par les failles syn‐rift, dans le substratum carbonaté à l’apex du roll‐over. La source, le calendrier et les conditions de migration des fluides ont été approchés à partir de l’analyse de la micro‐fabrique, la microthermométrie sur inclusions fluides, les analyses isotopiques (Sr, S, O, H) et de Terres Rares. Les résultats analytiques ont été enfin croisés avec un modèle thermique et structural du bassin qui conforte la séquence et la dynamique du système fluide en cours d’enfouissement.Une démarche similaire, mais plus limitée, a été conduite dans le bassin du North Viking Graben où l’accès aux marqueurs fluides est restreint aux données de sismique 3D et de carottes. Comme à Lodève, les minéralisations Ba‐Pb‐Zn colmatent un réservoir dans le substratum à l’apex du roll‐over. Elles se présentent sous forme de ciments dans des grès ou des fractures. Cette analyse apporte des contraintes complémentaires et permet de proposer un modèle dynamique général avec des variantes en fonction de la nature des fluides et des réservoirs.On retiendra donc la séquence fluide suivante :(a) Dans le cas du bassin de Lodève sur substratum carbonaté, les chemins préférentiels de drainage se développent dans des paléocanyons N‐S couplés à un réseau de fractures et d’endokarsts météoriques. Ces derniers sont élargis en début de rifting par la dissolution hypogène sulfurique produite par l’oxydation bactérienne des sulfates et des pyrites des blackshales, au contact de l’aquifère oxydant du Cambrien.(b) Le déséquilibre de compaction initie la migration des fluides interstitiels en surpression vers les marges avec des températures autour de 150‐180°C et des salinités entre 9 et 18wt%eq.NaCl. Les analyses isotopiques (Sr, S, O) révèlent que la majorité des fluides provient de l’altération diagénétique des blackshales riches en métaux. Des interactions sont également mises en évidence avec des fluides profonds (entre 240°C et 260°C ; salinités > à 20wt%eq.NaCl), qui lessivent les granites tardi‐hercyniens.(c) Pendant le syn‐rift, les conditions de surpression de fluide permettent la réactivation cyclique des failles, les décollements stratigraphiques et la formation de brèches hydrauliques, favorisant la mise en connexion avec les réservoirs superficiels à l’apex du rollover. Le modèle de Sibson ajusté aux fluides de bassins est alors le moteur de la migration verticale.(d) Les fluides thermogéniques commencent à être expulsés avec les derniers fluides de compaction au cours d’un stade plus évolué de l’enfouissement en empruntant les mêmes chemins jusqu’à l’apex du roll over. Ils sont alors partiellement freinés et déviés par les colmatages minéralisés antérieurs.(e) A Lodève, la continentalisation des minéralisations antérieures au cours de l’exhumation post‐rift conduit à leur remaniement partiel au niveau de la transition sulfate‐méthane induite par l’interaction entre une playa évaporitique et la dysmigration des hydrocarbures. Des barytines secondaires de basse température, déprimées en Sr sont alors précipitées de manière synsédimentaire dans des karsts météoriques du socle.Outre l’illustration d’un modèle complet (source to sink) de dynamique des fluides dans un bassin, ce travail apporte de nouvelles contraintes dans l’approche du colmatage des réservoirs à hydrocarbures sur les têtes de blocs basculés et sur la genèse des gîtes miniers de type Mississippi Valley‐Type.
https://hal.archives-ouvertes.fr/tel-01457583

tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583/document
https://hal.archives-ouvertes.fr/tel-01457583/file/th%C3%A8seLaurent2015V2.pdf

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : The Maguelone shore extends along the northern coast of the Gulf of Lions margin, West of the Rhone delta and East of some high gradient coastal streams that have been providing most of the elastic sediments to the Gulf of Lions margin since the early Miocene. This 10 km wide area comprises an onshore small coastal watershed (15 km long) in low-lying carbonate hills, kilometer wide marshes, sandy beach and shoreface featuring local low sedimentation. Deposit architecture in such a coastal zone records dynamics of incised valley fill under the influence of rivers and wave/current hydrodynamics in a microtidal environment during an eustatic cycle.;A detailed analysis of about 250 km of very high resolution seismic profiles, tens of cores and outcrops data revealed the evolution of the Maguelone coastal system from Late-Quaternary to present-day. It highlighted also dominant denudation processes in the upstream catchments associated to the formation of incised valley seaward during Quaternary. Combination of this inherited morphology together with hydrodynamics controlled the lagoonal environment evolution since the last transgression. In particular, the Maguelone shore is characterized by the formation of built-over-rias lagoonal systems and records an evolution from partially protected lagoon to isolated lagoon environment. These two stages of lagoon evolution correspond to distinct deposit environments. Correlation of fauna contents with deposit geometry improves lagoonal environment models.
EISSN: 1777-5817

hal-00486370
https://hal.archives-ouvertes.fr/hal-00486370
DOI : 10.2113/gssgfbull.181.2.211

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Recent field work and review of radiometric data obtained from Neogene lavas and plutonic rocks exposed in the Eastern Central Patagonian Cordillera (46–48ºS), which overlie subducted segments of the South Chile Ridge, suggest important Late Miocene to Pleistocene morphological changes in relation to base level variations and/or tectonic events. We present new field observations from a region south of Lago General Carrera-Buenos Aires, between the main Cordillera and the Meseta del Lago Buenos Aires, demonstrating that normal faulting controlled valley incisions and occurred during lava emplacement at 5–4 Ma and after 3 Ma. We also show that the 12 Ma basaltic flows of the Meseta del Lago Buenos Aires (~2000 m a.s.l.) have been subjected to deep incision, with younger lavas dated at 1.2 Ma partially filling the valleys. These incisions are thought to reflect progressive eastward tilting of the entire meseta. Our new observations, together with additional features from Central Patagonia, strongly suggest that tectonic events led to a regional widespread morphological change after 5 Ma. The coincidence in time and space between the subduction of segments of the South Chile Ridge at 6 and 3 Ma causing opening of a slab window, and strong base level variations in the studied area, suggests a cause-and-effect relationship. In Central Patagonia, compressional tectonics ended well before extensional events reported here. Causes of uplift and further extension are probably completely disconnected. The uplift is purely tectonic in origin and occurred prior to the subduction of the South Chile Ridge. Extension should be a consequence of this subduction.
ISSN: 0954-4879

insu-00272075
https://hal-insu.archives-ouvertes.fr/insu-00272075
DOI : 10.1111/j.1365-3121.2007.00766.x

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : During the 2003 summer monsoon, the Hi-CLIMB seismological stations deployed across the Himalayan Range detected bursts of high-frequency seismic noise that lasted several hours to days. On the basis of the cross correlation of seismic envelopes recorded at 11 stations, we show that the largest transient event on 15 August was located nearby a village partially destroyed on that day by a devastating debris flow. This consistency in both space and time suggests that high-frequency seismic noise analysis can be used to monitor debris flow generation as well as the evacuation of the sediment. A systematic study of one year of seismic noise, focusing on the detection of similar events, provides information on the spatial and temporal occurrence of mass movements at the front of the Himalayas. With a 50% probability of occurrence of a daily event, a total of 46 debris flows are seismically detected. Most of them were generated in regions of steep slopes, large gullies, and loose soils during the 2003 summer monsoon storms. These events are compared to local meteorological data to determine rainfall thresholds for slope failures, including the cumulative rainfall needed to bring the soil moisture content to failure capacity. The inferred thresholds are consistent with previous estimates deduced from soil studies as well as sediment supply investigations in the area. These results point out the potential of using seismic noise as a dedicated tool for monitoring the spatiotemporal occurrence of landslides and debris flows on a regional scale.
ISSN: 0148-0227

hal-00464177
https://hal.archives-ouvertes.fr/hal-00464177
DOI : 10.1029/2008JF001198

Éditeur(s) : HAL CCSD
Résumé : At present, the forecasting of littoral evolution presents a considerable social stake. Many studies have been achieved to better understand coastal dynamics. Such dynamics are controlled by morphology, sediment supply, hydrodynamics, eustacy... at different time scales. At geological time scale, deposits geometry, controlled by eustacy and subsidence, is succesfully analysed where sediment supply is high. But the littoral zones present important sediment supply variability. In low sediment supply areas, the record of coastal tracts is smaller and harder to interprete. Analyses of about 250 kilometres of new VHR seismic profiles acquired along the languedocian coast (Northern Gulf of Lion, France), tens of short cores and outcrops data allowed us to determine the three-dimensional high-resolution geometry of the coastal tracts from Quaternary to present-day. This highlighted the role of alongshore dynamics in coast where direct sediment supply is low. The concepts of protected lagoon and isolated lagoon were broughted to the fore and the effect of inherited incised valley morphology was discussed. Last, a complementary study by analogue modeling of the channel incision processes controled by eustatic and climatic changes allowed to discuss the role of incised valleys in coastal areas.
Actuellement, la prévision de l'évolution d'un système littoral représente un enjeu social important. De nombreuses études sont réalisées afin de mieux connaitre la dynamique côtière et donc de comprendre les facteurs qui influencent son évolution. Cette dynamique est contrôlée par la morphologie, les apports sédimentaires, l'hydrodynamique, l'eustatisme... qui agissent à des échelles de temps différentes et avec de fortes interactions. A l'échelle géologique, l'architecture des dépôts, contrôlée par l'eustatisme et la subsidence, est parfaitement décrite dans les zones à forts apports sédimentaires. Par contre, dans les zones à faibles apports sédimentaires, l'enregistrement des cortèges côtiers est réduit et est difficile à interpréter. L'analyse de 250 kilomètres de profils sismiques THR sur le littoral languedocien (Nord du Golfe du Lion, France), de carottages et de données de terrain a permis de déterminer la géométrie en trois dimensions des cortèges sédimentaires côtiers depuis le Quaternaire jusqu'à l'actuel. Ces observations montrent l'importance de la dynamique longshore sur les littoraux pauvres en apports sédimentaires directs. De plus, l'étude d'un système lagunaire sur ce littoral met en évidence les concepts de lagunes protégées et lagunes isolées ainsi que l'importance des vallées incisées dans la génèse de ces environnements. Enfin, la modélisation en laboratoire des processus d'incision de chenaux sous contrôle eustatique et climatique permet de discuter le rôle des vallées incisées en milieu côtier.
https://tel.archives-ouvertes.fr/tel-00542897

tel-00542897
https://tel.archives-ouvertes.fr/tel-00542897
https://tel.archives-ouvertes.fr/tel-00542897/document
https://tel.archives-ouvertes.fr/tel-00542897/file/theseraynaldef.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Fromthe Proterozoic to the Quaternary, the evolution of the Earthwas characterised by recurrent periods of glaciation.However, the margins of many ancient ice-sheets are poorly defined on palaeogeographic reconstructions.The extent and outlines of ancient ice sheets can be better understood through careful documentation ofsediments deposited at the ice-sheet margin. An outstanding example is provided herein based on an end-Ordovician archive in Libya (Tihemboka area, Murzuq Basin). The four sets of structures include: i) subglacialglaciotectonic structures and soft sediment deformations from flowing glacier ice, such as intraformational glacialstriae, intraformational deformation (shear planes, sheath folds), normal microfaults, and large-scaleglaciotectonic folds-and-thrusts; (ii) structures resulting from overpressured subglacial (meltwater) flowssuch as clastic dykes and tunnel valleys; (iii) proglacial depositional structures and facies related to highmagnitudemeltwater floods such as sandstone intraclasts, large-scale bedforms resulting from supercriticalflows, climbing-dune cross-stratification and kettle holes; and (iv) deformation structures resulting from freefloating and nonglacier ice such as ice-keel scours and ice-crystal marks. Such a set of structures points to anice-marginal (essentially continental) depositional setting, and provides an excellent suite of criteria to identifymargins of ancient ice sheets in the stratigraphic record. At a regional scale, a reconstruction through time andspace of the related depositional wedge is proposed. This corresponded to a seismic-scale (N120 m in thickness,40 km in length) ice-marginal wedge in front of an essentially warm-based ice-sheet inducing concomitantlarge-scale glaciotectonic deformation, glacial basin and tunnel valley downcuttings. The related ice-front wasassociated with high-energy meltwater flows feeding a network of deeply incised proglacial channels downstreamand, beyond them, a fluvioglacial deltaic system. Shallow ice-marginal permafrost most likely affectedthe depositional wedge. At a larger scale, the Tihemboka ice-marginal wedge is interpreted as related to a stillstandperiod over the Gondwana platform, developed over an estimated interval of a few thousands of years.Based on these data, the conditions that arose in a particularly favourable context for the development, the preservationand the identification of ice-marginal wedges in the geological record are reviewed. Significantmeltwater-derived sediment deposition and aggradation in an accommodation space resulting either frompreglacial inheritance, glacial downcuttings and/or glacio-isostatic lithospheric flexure, or active tectonic subsidence(>1 Myr) are required for their formation and subsequent preservation.
ISSN: 0012-8252

insu-01184739
https://hal-insu.archives-ouvertes.fr/insu-01184739
DOI : 10.1016/j.earscirev.2015.06.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : The current interpretation of the Messinian Salinity Crisis (MSC) involves the deposition of the so-called “peripheral or marginal” evaporites in onshore basins, as well as the erosion of the margins and the formation of thick evaporites in the deep parts of the basins. The present study focuses on intermediate depth basins, i.e. located between the onshore outcrops and the deep basins. Indeed, the Balearic Promontory shows small stepped basins filled with MSC deposits between its western extremity on the Alicante shelf and its eastern end around the Menorca block. New and already available seismic reflection profiles and onshore data allow us to investigate the nature and geometrical relationships of these deposits in the area between the islands of Ibiza and Mallorca.Our observations suggest the existence of three MSC-related units in this area. The lowermost transparent seismic unit can be interpreted as a 100 to 200-m-thick salt layer deposited in the deepest part of the Central Mallorca Depression. These evaporites pass laterally and upward into a thin-bedded seismic unit, which could be lithologically equivalent to the Upper Evaporites of the deep basins. All around the borders of the Central Mallorca Depression, this bedded seismic unit onlaps a Slope Unit which shows bedded to chaotic and rafted facies. The Messinian continental shelf is eroded and incised by a valley extending from the Palma onshore area to the Mallorca downslope domain.Our results suggest the presence offshore of at least two generations of diachronous MSC deposits. The observation of salt on a continental high and the widespread MSC deposits on the margins of the Central Mallorca Depression call into question the location of halite preferentially in the deep abyssal basins and the significance of the deep basin MSC units that onlap onto the Margin Erosional Surface (MES), as observed all around the passive margins of the Northwest-Mediterranean Basin. The dual terminology used for peripheral/deep MSC evaporites cannot be applied to any of the MSC units found in the study area.
ISSN: 0025-3227

hal-01115656
https://hal.archives-ouvertes.fr/hal-01115656
DOI : 10.1016/j.margeo.2014.10.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In fold and thrust belts drainage organization and patterns of sedimentation depend conceptually on the ability or not for preexisting reaches to incise uplifting thrust sheets. In this study we investigate experimentally the dynamics of drainage network in a wedge submitted to shortening and erosion. It allows us to reproduce and to monitor the interactions between tectonics, erosion and sedimentation during the development of up to five successive thrust sheets. In the experiments channels adjust to uplift rate by both increasing their slope and narrowing their channels as it is observed in nature. The series of experiments shows that the proportion of persistent preexisting transverse channels increases with the ratio of rainfall over shortening rates. The experiments confirm the view that the competition between discharge and tectonic uplift controls along-strike variations in sediment flux in sedimentary basins by controlling the drainage organization. If the transverse channels draining a wedge are not diverted, a line-source dispersal system develops in front of the active structure. If channels are diverted in the backlimb of the frontal structure it results in point-sourced depositional systems separated by areas fed only by small channels developing in the front of the wedge. Fans accumulated in front of the active structures reveal two stages of sedimentation, one of progradation, while the frontal structure is active and a second one of valley backfilling and thrust sealing during internal deformation of the wedge. The experiments also suggest that spatial variations in rock uplift rate along a thrust front may be evidenced by minimum-discharge variations of persistent transverse channels.
ISSN: 0040-1951

insu-01252482
https://hal-insu.archives-ouvertes.fr/insu-01252482
DOI : 10.1016/j.tecto.2015.09.007