Éditeur(s) : HAL CCSD Elsevier
Résumé : Une approche par datations multiples a été menée sur les dépôts de sédiments de crue retrouvés dans les gorges du Gardon (Languedoc). Le plomb-210, le césium-137 et l’analyse géochimique des sédiments contaminés par les mines ont été utilisés pour reconstruire l’histoire des dépôts de crue. Cette approche a été combinée avec l’historique des crues du Gardon depuis 1890 pour affiner l’approche géochronologique. Au niveau de la cavité GG et de la terrasse GE les analyses ont permis d’illustrer les mécanismes d’érosion-redéposition pouvant perturber les séquences de sédiments. Les enregistrements des dépôts de sédiments de crue sont complets sur la terrasse GE située à 10 m au-dessus du lit mineur à partir de 1958, et incomplets auparavant. Sur la période 1880-1958, 25 crues ont eu un débit suffisant (>1450 m3/s) pour recouvrir la terrasse, alors que l’on recense seulement 5 à 6 crues depuis 1958 (pour un débit de submersion supérieur à 1700 m3/s). L’augmentation progressive du débit de submersion et la fréquence moindre d’inondation de la terrasse ont pu permettre sur la période récente la stabilisation de la couche de surface par la végétation et limiter l’érosion lors de crues importantes. Les enregistrements semblent complets dans la cavité GG située à 15 m au-dessus du lit mineur. La fréquence moindre de submersion à ce niveau plus élevé peut expliquer une meilleure stabilisation des dépôts de crue, rendus moins vulnérables à l’érosion. La datation au radiocarbone a été testée même si elle ne permet pas de dater avec précision les dépôts de crue des derniers siècles. Sur la terrasse GE, 80% des dates au carbone 14 sur charbon de bois sont beaucoup trop vieilles par rapport aux autres techniques de datation, ce qui peut s’expliquer par une remobilisation/déstockage de charbons de bois anciens. Les datations radiocarbone sur graines donnent de meilleurs résultats, car issues d’une production annuelle, plus facilement décomposable et moins sujette à des dépôts intermédiaires. Au final, il apparaît que la technique de datation par radiocarbone sur des charbons de bois retrouvés dans les séquences sédimentaires n’est pas fiable, alors qu’elle est la plus pratiquée en paléo-hydrologie. L’utilisation combinée du plomb-210, du césium-137, de l’analyse géochimique des sédiments et des informations sur les crues historiques a permis de discriminer et de dater les différents dépôts de crue de ce dernier siècle dans la cavité GG et la terrasse GE. / A multidating approach was carried out on slackwater flood deposits, preserved in valley side rock cave and terrace, of the Gardon River in Languedoc, southeast France. Lead-210, caesium-137, and geochemical analysis of mining-contaminated slackwater flood sediments have been used to reconstruct the history of these flood deposits. These age controls were combined with the continuous record of Gardon flow since 1890, and the combined records were then used to assign ages to slackwater deposits. The stratigraphic records of terrace GE and cave GG were excellent examples to illustrate the effects of erosion/preservation in a context of a progressively self-censoring, vertically accreting sequence. The sedimentary flood record of the terrace GE located at 10 m above the channel bed is complete for years post-1958 but incomplete before. During the 78-year period 1880-1958, 25 floods of a sufficient magnitude (> 1450 m3/s) have covered the terrace. Since 1958, however, the frequency of inundation of the deposits has been lower:only 5 or 6 floods in 52 years have been large enough to exceed the necessary threshold discharge (> 1700 m3/s). The progressive increase of threshold discharge and the reduced frequency of inundation at the terrace could allow stabilisation of the vegetation cover and improved protection against erosion from subsequent large magnitude flood events. The sedimentary flood record seems complete for cave GG located at 15 m above the channel bed. Here, the low frequency of events would have enabled a high degree of stabilisation of the sedimentary flood record, rendering the deposits less susceptible to erosion. Radiocarbon dating are used in this study and compared to the other dating techniques.Eighty percent of radiocarbon dates on charcoals were considerably older than those obtained by the other techniques in the terrace. On the other hand, radiocarbon dating on seeds provided better results. This discrepancy between radiocarbon dates on charcoal and seeds is explained by the nature of the dated material (permanent wood vs. annual production and resistance to degradation process). Finally, we showed in this study that although the most common dating technique used in paleoflood hydrology is radiocarbon dating, usually on charcoal preserved within slackwater flood sediments, this method did not permitus to define a coherent age model. Only the combined use of lead-210, caesium-137, and geochemical analysis of mining-contaminated sediments with the instrumental flood record can be applied to discriminate and date the recent slackwater deposits of the terrace GE and cave GG.
ISSN: 0169-555X

hal-01059669
https://hal.archives-ouvertes.fr/hal-01059669
https://hal.archives-ouvertes.fr/hal-01059669/document
https://hal.archives-ouvertes.fr/hal-01059669/file/ly2014-pub00040953.pdf
IRSTEA : PUB00040953

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The active collision zone around Taiwan orogen receives a variety of sedimentary inputs, including terrigenous flux from Taiwan and Chinese rivers, oceanic currents and atmospheric dust. In order to determine the present-day respective contributions of these different sources, we analysed the Pb and Sr isotopic compositions of late Quaternary sediments accumulated offshore east Taiwan. Samples from the Taiwan Coastal Range (andesites, sandstones, conglomerate and Peinan River terraces and suspended loads) have also been analysed to constrain the mean Taiwan isotopic signature. Mixing lines between the different sources of material indicate that the core located in the Okinawa Trough represents a mixture of about 60% of Taiwan, 30% of Chinese Loess and 10% of Yangtze River contributions. The southernmost core, located close to Luzon Are, is influenced by Taiwan (60%) and volcanic material (40%). The Sr and Pb isotopic compositions of samples cored in the Manila Trench and in the Huatung Basin are strongly influenced by the Taiwan signature, while the Ryukyu Trench core samples point to significant but variable contributions of Chinese Loess and Yangtze River. This work also reports Zn isotopic variations in the silicate fraction of these marine core samples. The overall variation in Zn isotopic compositions (expressed as 666 Zn) is greater than 0.3 per mil (parts per thousand) for an analytical precision of +/- 0.05 parts per thousand. The Zn isotopic signal for most of the marine core samples is similar to the literature data measured on sedimentary material, except for the Manila Trench core samples and the older sample from the Huatung Basin: they present values heavier by 0.2-0.3 parts per thousand, close to those obtained on all Taiwan rocks and Peinan River particulates. These results show: 1- the particular characteristics of Taiwan Zn isotopic compositions on a large scale; and: 2- the possible use of Zn isotopes as a tracer of material sources.
ISSN: 0009-2541

hal-00412214
https://hal.archives-ouvertes.fr/hal-00412214
DOI : 10.1016/j.chemgeo.2007.10.024

Éditeur(s) : Elsevier
Résumé : The Danube Canyon is a large shelf-indenting canyon that has developed seaward of the late Pleistocene paleo-Danube valley. Mechanisms of canyon evolution and factors that controlled it are revealed by analyzing the morphology and the sedimentary structure of the canyon, as well as the main features of the continental margin around the canyon. This is based on investigation by swath bathymetry in the canyon area combined with different types of seismic data. The canyon is a major erosional trough with a flat bottom cut by an entrenched axial thalweg. The thalweg path varies from highly meandering to fairly straight in relation to the local gradient. Segments of the canyon are characterized by specific morphology, orientation and gradient along the axial thalweg. We interpret these segments in terms of canyon maturity. The sedimentary structure of the canyon documents an older phase of erosion followed by partial infilling, and thus attests for repeated cycles of canyon development. Canyon morphology is interpreted as a result of erosive sediment flows along the entrenched axial thalweg that caused downcutting into the canyon bottom and instability of the canyon walls, and hence enlargement of the canyon and expansion by headward erosion. During the last lowstand level of the Black Sea the canyon was located in an area of high sediment supply close to the paleo-Danube River mouths. This is indicated by buried fluvial channels on the shelf and by a wave-cut terrace associated with a water level situated about - 90 m below the present level. We infer that erosive flows in the canyon resulted from hyperpycnal currents at the river mouths, probably favored by the low salinity environment that characterized the Black Sea during lowstand times. Other mechanisms could have contributed to trigger sediment failure along the canyon, such as instability related to the presence of shallow gas, or the effect of a deep fault.
Marine Geology (0025-3227) (Elsevier), 2004-05 , Vol. 206 , N. 1-4 , P. 249-265

Droits : 2004 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2004/publication-476.pdf
DOI:10.1016/j.margeo.2004.03.003
http://archimer.ifremer.fr/doc/00000/476/

Éditeur(s) : HAL CCSD EDP Sciences
Résumé : International audience
This paper presents a paleo-hydrological study conducted on sediment flood deposits at two sites located in the Gardon Gorges, Southeast France. The first study site is a valley‑side terrace (referred to as site GE, located 10m above the channel bed) and the second is located in a cave (referred to as site GG, perched 15m above the bed level). Paleo‑flood events were identified by carefully analyzing each slackwater flood deposits. The flood units were then dated using a variety of dating techniques, namely 137Cs, 210Pbex, 14C geochemical analysis of mining‑contaminated slackwater flood sediments, archeological objects and the historic flood record. Hydraulic modeling was also carried out in order to verify the coherence between the stratigraphic records of flood deposits at the sites and the historic flood levels known along the river Gardon. It is demonstrated that all the major flood events of the 20th century can be identified at terrace GE. This type of geomorphological unit can therefore be used as a sound basis for a paleo-hydrological analysis of the Gardon Gorges. Furthermore, the analysis of the stratigraphic record at site GG demonstrates that the site can be used to trace the largest flood events that have occurred within the past 600 years. The study reveals that the frequency of extreme flood events increased during the Little Ice Age
Une étude paléo-hydrologique a été entreprise dans les Gorges du Gardon, où deux coupes sédimentaires ont été étudiées. La première provient d'une terrasse (coupe GE située à 10 m de hauteur au dessus de la rivière) et l'autre, d'une cavité (coupe GG localisée à 15 m au-dessus de la rivière). L'identification et la mise en évidence des différents paléo-événements de crue ont été établies grâce à l'inspection minutieuse de chaque dépôt sédimentaire et d'une étude géochronologique fine (137Cs, 210Pbex, 14C, métaux traces, objets archéologiques, historiques des crues). Nous avons souhaité évaluer la capacité des terrasses fluviatiles du Gardon à enregistrer des paléo-événements en comparant les coupes sédimentaires aux données historiques des hauteurs d'eau et aux résultats d'un modèle hydraulique 1D. Nous montrons que la terrasse GE enregistre la quasi-totalité des évènements du 20ème siècle et qu'à priori, ce type d'objet géomorphologique peut être utilisé pour toute étude paléo-hydrologique sur le Gardon. De plus, l'étude de la coupe GG (cavité perchée à 15 m) permet de reconstituer les évènements intenses au cours des 600 dernières années. Nous montrons une augmentation des crues extrêmes dans le Haut-Languedoc au cours du "Petit âge glaciaire".
ISSN: 0018-6368

hal-01108400
https://hal.archives-ouvertes.fr/hal-01108400
https://hal.archives-ouvertes.fr/hal-01108400/document
https://hal.archives-ouvertes.fr/hal-01108400/file/ly2014-pub00041935.pdf
DOI : 10.1051/lhb/2014037

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The dating of alluvial landforms by cosmogenic nuclides requires distinguishing the pre-deposition inheritance from the post-deposition history of the clasts in the studied marker. Moreover, estimating catchment-scale erosion rates from the concentrations of cosmogenic nuclides in active alluvia requires a good knowledge of the local/regional relationships between rock exhumation and transport through space and time. This is still poorly known for timescales of tens of thousand years. In order to document the evolution of clast exhumation and transport rates through time, we analyze in situ 10Be concentrations in boulders and cobbles from hillslopes to outlet of an arid mountainous catchment located in Gobi-Altay, Mongolia, strongly affected by global climatic changes during the Pleistocene-Holocene period. Samples were collected on bedrock, abandoned alluvial deposits, active colluvia and alluvia. Our results show a large 10Be scattering in the active river bed, consistent with a low and discontinuous catchment erosion rate dominated by mass wasting and fluvial incision. On the contrary, pre-exposure signal within abandoned terraces is much more homogeneous, consistent with climatic pulses responsible of strong erosional events on hillslopes and rapid fluvial transport. These results show that exhumation/transport processes at the catchment scale vary in style and intensity through time as a consequence of climatic oscillations. The occurrence of abrupt climatic changes during short periods of time recorded by 10Be concentrations in abandoned alluvia raise questions about the temporal applicability of catchment erosion rates derived from cosmogenic nuclide concentrations measured in sediments of active rivers. On the other hand, strong and short erosion events limit and homogenize the pre-exposure 10Be signal in associated deposits like debris-flows, making them particularly suitable markers for dating in active tectonic and paleoclimatic studies.
ISSN: 0169-555X

hal-00626702
https://hal.archives-ouvertes.fr/hal-00626702
https://hal.archives-ouvertes.fr/hal-00626702/document
https://hal.archives-ouvertes.fr/hal-00626702/file/GEOMOR-2485R1_corrected.pdf
DOI : 10.1016/j.geomorph.2011.07.023

Éditeur(s) : Université de Bucarest - Université de Bretagne occidentale
Résumé : This study is focusing on the architecture and recent sedimentary evolution of the Danube channel, the youngest channel-levee system in the Danube deep-sea fan. The study was conducted as part of the BlaSON French-Romanian Project, and combined high-resolution seismic-reflection profiles and chirp profiles with multibeam bathymetry and piston cores. This data set was acquired in 1998 during a joint survey IFREMER-GeoEcoMar of the north-western Black Sea. Previous seismic and acoustic data were also used. The Danube deep-sea fan is a large passive-margin mud-rich fan. Like the other systems of this type (Amazon fan, Mississippi fan or Indus fan) the Danube fan consists of stacked channel-levee systems intercalated with mass-transport deposits. Seismic and sedimentary facies in the Danube fan are similar to those identified in most of the mud-rich systems. Nevertheless, the Danube fan is distinguished by a specific feature: its development in a freshwater environment. This is due to the peculiar water-level history of the Black Sea controlled by the link to the Mediterranean through the Strait of Bosphorus and the Sea of Marmara. This connexion was successively interrupted (during sea level lowstands) and re-established (when the sea level was rising above the Bosphorus). Temporary absence of marine water influx during lowstands together with large freshwater inputs from the Danube and other major rivers changed the Black Sea into a freshwater lake during times of fan activity. This peculiarity possibly favourised the development of hyperpycnal flow at the Danube mouth and the initiation of turbidity currents in the deep-sea fan. The Danube channel is directly connected to the large shelf-indenting Danube canyon (also known as Viteaz canyon). The Danube canyon is deeply incised into the shelf margin for 26 km landward of the shelfbreak. During lowstands this canyon acted as the most important path for sediment supply to the deep sea in this part of the continental margin. It consists of a main trough with steep flanks, and a meandering thalweg cut into the flat canyon floor, attesting for the development of the canyon by erosion in the entrenched axial thalweg. Sections with specific morphology, orientation and gradient identified along the canyon, are interpreted as phases of landward expansion of the canyon. Internal structure of the canyon shows several erosional surfaces, which indicate that the present morphology of the canyon is the result of its polyphasic evolution. Instability in the zone of the canyon is related to the important sediment supply at the Danube mouth, to the presence of the gas in the surficial sediment, and possibly under a structural control. The upper part of the Danube channel (between the Danube canyon and ~1400 m depth) consists in a single leveed-channel that has undergone significant overbank deposition, as attested by the well-developed levees. The levees are strongly asymmetrical, being higher and wider on the right-hand side looking downstream. This type of asymmetry is rather common in deep-sea fans, and is generally attributed to the Coriolis effect (Menard, 1955). The channel is slightly sinuous, partially filled and incised by an entrenched thalweg, connected to the axial thalweg of the Danube canyon. Detailed seismic investigation inside the channel trough documented several depositional phases within the channel fill, separated by erosional surfaces. These surfaces are associated with distinct terraces identified on the multibeam bathymetry, that can be followed downward along the main trough axis. The valley fill deposits (where not removed by the subsequent erosional event) show an axial HAR (High Amplitude Reflections) seismic facies with lateral lower amplitude continuous reflections consisting in a levee facies, as proved by sampling. This indicates that filling up was associated with flow within the channel, and not with interruption of fan activity. On the middle slope below 1400 m, this single channel bifurcates through repeated avulsions. As a result, several highly meandering channels developed. The onlap relationships between these channels indicate that only one channel was active at a time. Each phase of avulsion resulted in a depositional unit consisting in a basal unchannelized lobe defined as High Amplitude Reflection Packets (HARP, Flood et al., 1991) that underlies a channel-levee system. The deposition of HARPs was associated with the readjustment of the longitudinal profile of the channel after the breaching of a levee, which resulted in remobilization of upslope channel deposits and eroded levees. When this adjustment was complete, erosion ceased and levees began to develop above the HARPs (Pirmez et al., 1997). All the identified phases of avulsion followed the same pattern: (1) breaching of the lower and narrower left levee; (2) building of a unit of High Amplitude Reflector Packets (HARP) basinward of the bifurcation point by the unchannelized flow, while the former channel was abandoned; and (3) initiation of a new meandering leveed channel. The northward migration of the resulting units through repeated bifurcations is influenced by the asymmetry between levees (hence by the Coriolis effect), and confined between the high levees of the initial phase of the Danube channel (to the south) and the steep relief of the Dniepr fan (to the north). Structure of the fan valley fill indicate that the erosional surfaces inside the upper channel could be formed in response of successive avulsions, by the adjustment of the longitudinal profile of the channel following the breaching of a levee wall. Sediments removed by erosion formed the HARP lobes basinward of the avulsion point. When this adjustment was complete, a channel-levee system developed downward of the bifurcation, overlying the HARPs, but also upward of this point, as a confined channel-levee system inside the erosional trough of the fan valley. Fluvial incisions identified on the continental shelf, together with the coastline location during the last active period of the Danube channel, indicated that the paleo-Danube was directed towards the head of the Danube canyon. Paleo-Danube mouth was fairly close (ca. 10 km) to the Danube canyon, supplying sediment to the Danube channel. Furthermore, hyperpycnal flow probably prevailed in the freshwater environment that characterized the Black Sea during times of fan activity. These conditions would have enabled the development of a quasi-continuous river-canyon-deep-sea fan system, ensuring the effective transfer of the sediment between the coastal zone and the deep sea.
Ce travail est consacré à l'étude de l'architecture et de l'évolution sédimentaire récente de l'éventail profond du Danube, en particulier de son dernier système chenal-levée: le chenal du Danube. L'étude a été réalisée dans le cadre du projet de coopération franco-roumaine BlaSON, à partir des données sismiques, bathymétriques-acoustiques et sédimentologiques acquises en 1998 lors d'une campagne en mer Noire réalisée par IFREMER et GeoEcoMar. Des données sismiques et acoustiques antérieures ont été également utilisées. L'éventail profond du Danube s'enserre dans la catégorie des grands éventails vaseux. Comme les autres systèmes de ce genre (tel que les éventails de l'Amazone, du Mississippi ou de l'Indus) il est constitué d'une succession de systèmes chenaux-levées intercalés avec des dépôts de transport en masse. Le fonctionnement de l'éventail était conditionné par la baisse du niveau marin lors des périodes glaciaires. Ses faciès sismiques et sédimentaires s'apparentent aux faciès qui caractérisent la plupart des éventails de ce type. L'éventail du Danube constitue néanmoins un cas particulier parmi les autres systèmes étudiés, du fait de son fonctionnement dans un bassin lacustre. Ceci est dû à la situation spécifique de la mer Noire dont la connexion avec la Méditerranée, par le détroit de Bosphore et la mer de Marmara, a été successivement interrompue (au cours de périodes de bas niveau) et reprise (quand le niveau marin remontait en dépassant le seuil du Bosphore). L'absence de l'apport d'eau salée pendant les périodes glaciaires, associée avec l'augmentation de l'apport fluvial, ont déterminé l'installation d'un milieu d'eau douce dans la mer Noire à chaque fois que la baisse du niveau permettait la reprise du fonctionnement de l'éventail profond. Cette situation particulière aurait favorisé la formation des courants hyperpycnaux à l'embouchure d'un fleuve du débit du Danube qui déversait ses eaux turbides dans un bassin lacustre, et aurait donc influencé l'apparition de courants de turbidité dans l'éventail profond. Le chenal du Danube s'est développé sur la pente continentale en prolongation du canyon du Danube (ou Viteaz) auquel il est directement connecté. Le canyon est incisé de manière significative (26 km) dans la plate-forme continentale. Au cours de bas-niveaux marins il constituait la principale voie de transfert des sédiments terrigènes vers le bassin profond dans cette partie de la marge. Le canyon est constitué par une entaille avec des flancs abrupts et un talweg axial incisé, qui montre l'importance du processus d'érosion du fond pour le développement du canyon. Les segments qui ont été identifiés le long du canyon, avec des morphologies, des orientations et des pentes spécifiques, sont interprétés comme des phases d'avancement du canyon vers la côte. Plusieurs incisions sont visibles dans la structure interne du canyon et témoignent que la morphologie actuelle du canyon est le résultat de son évolution polyphasée. L'instabilité de la zone du canyon est en relation avec les apports sédimentaires importants à l'embouchure du Danube, avec la présence du gaz dans les sédiments superficiels, et possiblement sous un contrôle structural. Sur la pente supérieure (entre le canyon du Danube et environ 1400 m de profondeur) le chenal du Danube présente des levées bien développées et fortement asymétriques, avec la levée droite plus haute et plus large que la levée gauche. Ce type d'asymétrie, fréquemment décrit dans les éventails profonds est généralement attribué à l'effet Coriolis (Menard, 1955). Le chenal est légèrement sinueux, partiellement comblé et incisé par un talweg axial qui représente la continuation sur la pente du talweg incisé dans le canyon du Danube. L'analyse sismique détaillée du remplissage de la vallée montre plusieurs phases de dépôt, séparées par des discontinuités érosives. Ces surfaces d'érosion correspondent à des terrasses emboîtées, relativement parallèles le long de la vallée, visibles dans la bathymétrie. Les dépôts qui constituent le remplissage du chenal présentent un faciès sismique de type HAR (High Amplitude Reflections) dans l'axe du chenal, partiellement (ou parfois totalement) enlevé par les phases d'érosion subséquentes, qui continue latéralement avec des réflexions litées correspondant à un faciès sédimentaire de levée. Le remplissage de la vallée a été donc associé avec des écoulements dans le chenal, et non pas avec l'interruption de son fonctionnement. Sur la pente inférieure, le chenal unique bifurque plusieurs fois par avulsion et forme de nouveaux systèmes chenaux-levées méandriformes. Ces systèmes se succèdent verticalement en onlap, ce qui montre qu'un seul chenal a été actif à la fois. Chaque phase d'avulsion a eu comme résultat la mise en place d'une unité constituée par un lobe défini comme "High Amplitude Reflection Packets" (HARP, Flood et al., 1991) à la base, et un système chenal-levée au sommet. Le dépôt d'un lobe HARP est associé avec de l'érosion dans le chenal en amont du point d'avulsion pour l'ajustement de son profil après la rupture de la levée. Quand le chenal a retrouvé son profil d'équilibre, l'érosion a cessé et des levées ont commencé à se développer au-dessus des HARPs (Pirmez et al., 1997). Toutes les phases d'avulsion se sont développées d'après le même modèle: (1) la rupture de la levée gauche, plus étroite; (2) le dépôt d'un lobe HARP par les écoulements non-chenalisés en aval du point d'avulsion, et l'abandon de l'ancien chenal; (3) l'initiation d'un nouveau système chenal-levée. La migration systématique du chenal vers le nord est influencée par l'assymétrie des levées (donc par la force de Coriolis), et confinée entre les grandes levées de la phase initiale du chenal du Danube, au sud, et le relief abrupt de l'éventail du Dniepr au nord. La structure sédimentaire du chenal du Danube indique que les surfaces érosives à l'intérieur du remplissage du chenal se seraient formées en réponse aux avulsions, du fait de l'ajustement du profil du chenal après la rupture d'une levée. Les sédiments du chenal érodés au cours de ce processus ont formé les lobes HARP. Quand le chenal a retrouvé son profil d'équilibre, un système chenal-levée s'est développé en aval du point d'avulsion au dessus du lobe HARP, mais aussi en amont de ce point, où il se trouve confiné dans la vallée érosive. Les incisions fluviatiles identifiés sur la plate-forme continentale et la position de la ligne de côte pendant la dernière période d'activité du chenal du Danube montrent que le paléo-Danube se dirigeait directement vers la tête du canyon du Danube. Son embouchure était située à proximité du canyon, qui alimentait le chenal du Danube. Cependant, les courants hyperpycnaux devaient prévaloir dans le milieu de salinité réduite qui caractérisait la mer Noire lors des périodes actives de l'éventail. Ces conditions auraient favorisé la mise en place d'un système quasi-continu fleuve-canyon-éventail profond, qui contrôlait le transfert des sédiments entre la côte et le bassin profond.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2002/these-1206.pdf
http://archimer.ifremer.fr/doc/00000/1206/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The investigation of deformation rates on a mountain piedmont can provide key information for improving our understanding of the overall dynamics of a mountain range. Here, we estimate the shortening rate absorbed by a Quaternary emergent detachment fold on the southeastern piedmont of the Tianshan (China). Our work is primarily based on new 10Be cosmogenic exposure dating of deformed alluvial surfaces. The method we have developed combines depth profiling with sampling of surface cobbles, thereby allowing exposure time, erosion rate and inheritance to be simultaneously constrained. The exposure ages of the uppermost uplifted alluvial surfaces are around 140±17 ka140±17 ka, 130±9 ka130±9 ka and 47±9 ka47±9 ka, from west to east. A terrace lying below the 140 ka surface is dated at 65±5 ka65±5 ka. The ages of the uplifted and folded alluvial surfaces were then combined with estimates of shortening obtained using two distinct methods: (1) the excess area method, where sedimentation rates, extracted from magnetostratigraphic studies, are used to determine the amount of sedimentation after the abandonment of the river; and (2) a folding model derived from sandbox experiments. The late Pleistocene shortening rates are shown to be between 0.4±0.1 mm/yr0.4±0.1 mm/yr and 0.8±0.5 mm/yr0.8±0.5 mm/yr on the western part of the fold and 2.1±0.4 mm/yr2.1±0.4 mm/yr along its central part. The central part of the frontal Yakeng anticline therefore accommodates up to 25% of the total shortening currently absorbed across the whole Eastern Tianshan range (8 mm/yr). However, this situation seems to have prevailed for only the last 150 ka, as the shortening rate absorbed by this nascent fold was previously ten times slower. While the initiation of folding of the Yakeng anticline can be traced back to 5.5 Ma ago, the basinward migration of the active deformation front onto the Yakeng fold is a relatively recent phenomenon and appears to be diachronous from west to east, probably in relation to the tectonic activity of the folds in the hinterland.
ISSN: 0012-821X

hal-01306997
https://hal.archives-ouvertes.fr/hal-01306997
DOI : 10.1016/j.epsl.2015.11.041

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : A study combining very high resolution seismic and sediment core data has been carried out on the Thau lagoon (Mediterranean coast, microtidal setting, SE France) in order to understand more clearly the dynamics and Holocene chronology of its closure through the different stages of its filling. One main seismic unit (U2) has been defined into the infill, above the rocky basement (U0) and a composite unit U1, which is interpreted as remnants of Pleistocene fluvial terraces or/and to early marine Holocene deposits. Unit U2, that reaches locally 9 m in thickness, rests conformably on U1 in the central part of the lagoon and onlaps U0 or U1 close to the edge of the lagoon. It is divided in two sub-units, U2-1 and U2-2. U2-2 rests paraconformably on U2-1 in the central part of the lagoon where the infill is the thickest, while a marked erosional unconformity is observed between U2-1 and U2-2 on topographic highs of the basement and on the seaward edge of the lagoon. A total of seven elementary sequences have been observed in U2-1 and U2-2.;According to core data, U2 consists in a series of mud-dominated sequences, with shell fragments dispersed at the base. The vertical distribution of the fauna into U2-1 and U2-2 reveals a lagoonal environment. However in U2-1, marine species are more abundant in the south of the lagoon. C-14 AMS dating provides three ages: similar to 6000 cal yr B.P. in the lower part of U2-1 on CAL1, 5400 cal yr B.P. just above the boundary between U2-1 and U2-2 on CAL4, similar to 3000 cal yr B.P. in the middle of U2-2 on CAL4.;A scenario to explain the lagoon infill stratigraphy and geometry is proposed. The beginning of the lagoon infill occurred with the initiation of the barrier construction, as soon as the sea-level rise slowed down significantly, i.e. between 7000-6000 yr B.P. The sediment-fill began into the back-barrier system, with a high rate of sedimentation for U2-1, according to the radiocarbon data. At 5400 yr B.P., the barrier is assumed to be totally closed leading to the deposition of the fully lagoonal U2-2 succession. The unconformity between U2-1 and U2-2 is interpreted as the result of a rapid landward retreat of the barrier. This severe retreat could be related to climate forcing and/or brutal change in sediment discharge driven by the Rhone River, which is the main sediment source of the longshore drift. In this scenario, the last sub-unit, U2-2, represents most of the late Holocene infill. In this framework, the elementary sequences observed in U2-2 could be related to high frequency climate changes of about 1000-1500 years periodicity according to C-14 dates.
EISSN: 1777-5817

hal-00486386
https://hal.archives-ouvertes.fr/hal-00486386
DOI : 10.2113/gssgfbull.181.2.197