Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We present a 2-D Contact Dynamics discrete element model for simulating initiation and motion of rock avalanches, integrating hillslope geometry, Mohr-Coulomb rock behavior, pore pressure before avalanche triggering, and avalanche trigger. Avalanche motion is modeled as a dense granular flow of dry frictional and cohesive particles. On the basis of granular physics and shear experiments, we review some of the theories for the unexpectedly long runout of rock avalanches. Different causes are evoked, according to the strength (strong or weak) of the slip surface relative to the bulk. "Mechanical fluidization'' and "acoustic fluidization'' theories state that agitation of rock particles reduces frictional strength, increasing runout. Conversely, granular mechanics suggests that, as "shear-strain'' rate increases, granular material becomes more agitated, more dissipative, and more resistant. Another theory states that dynamic fragmentation of clasts creates an isotropic pressure that drives longer runout. In contrast, granular mechanics suggests that fragmentation may induce fluidization and strengthening of the granular material, while particle size reduction (among others) induces weakening of the granular flow and enhances long runout. Runout is also enhanced for column-like rock masses collapsing from steep hillslopes. Long runout may also be linked to thermal weakening mechanisms at the slip surface (e.g., thermal pressurization, and shear melting), which may lower drastically the shear strength. The model is illustrated with a hypothetical example of a rain-triggered avalanche, mobilizing shallowly dipping layers. Several phases are identified, including slope failure, avalanche triggering resulting from slip weakening, and avalanche motion in which rocks are folded and sheared.
ISSN: 0148-0227

hal-00420883
https://hal.archives-ouvertes.fr/hal-00420883
DOI : 10.1029/2008JF001072

Éditeur(s) : HAL CCSD
Résumé : The present PhD thesis is devoted to the numerical simulation and analysis of shear on cohesive granular materials. In the framework of the Contact Dynamics method, we developed a model of cohesive bonding, which mimics cohesion by cementation. This model involves three contact strength parameters (a tensile strength, a coefficient of sliding friction, and a coefficient of rolling friction) as well as a local criterion, which controls the creation and the breaking of cohesive bonds. All contacts are cohesive at the beginning of the numerical simulations, and contact rupture leads to an irreversible loss of tensile strength (debonding). We varied systematically the three contact strength parameters and studied their influence on the shear strength, the dilatancy, and the microstructure of the granular media. Our results show that internal friction and macroscopic tensile strength have different origins at the contact scale. We also find that the microstructure of the granular media, when sheared at the steady state (also known as the `critical state"), is strongly affected by the local coefficients of sliding and rolling friction. In particular, the mechanical role of the weak network changes with these two contact parameters, which results from the formation of a new structure of force transmission. On the other hand, we also applied the same numerical simulation method to the simulation of landslides. We developed a methodology, which takes into account the initial morphology of the hillslope, the strength of geomaterials, and a triggering factor, integrating in the same model the initiation and propagation phases of the landslide. To illustrate this methodology, we applied it to the simulation of a hypothetical example of avalanche triggered by the progressive rise of a water table.
Ce travail de thèse porte sur la modélisation numérique et l'analyse du cisaillement dans les milieux granulaires cohésifs. Dans le cadre de la méthode de la Dynamique des Contacts, nous avons développé un modèle de cohésion qui cherche à imiter la cohésion par cimentation. Ce modèle fait intervenir trois paramètres de résistance au niveau des contacts (une résistance à la traction, un coefficient de frottement de glissement, et un coefficient de frottement de roulement) ainsi qu'un critère de création et de rupture des liens cohésifs. Les contacts sont cohésifs au début des simulations et leur rupture entraîne la perte irréversible de la résistance à la traction. Nous avons fait varier les trois paramètres microscopiques et nous avons étudié leur influence dans la résistance au cisaillement, la dilatance, et la microstructure du milieu. Nos résultats montrent que le frottement interne et l'adhésion macroscopiques ont des origines microscopiques différentes. Nous observons aussi que la microstructure du milieu cisaillé à l'état stationnaire (aussi connu comme ``l'état critique") est fortement affectée par l'angle de frottement et la résistance au roulement au niveau des contacts. En particulier, le rôle mécanique du réseau faible change avec ces deux paramètres microscopiques, ce qui résulte de la formation d'une nouvelle structure de transmission de forces. D'autre part, nous avons appliqué cette méthode de simulation numérique à l'étude d'un processus naturel : les glissements de terrain. Nous avons développé une méthodologie qui tient compte de la morphologie initiale du système, de la résistance des géomatériaux, et d'un mécanisme de déclanchement, ce qui permet d'intégrer dans le même modèle les phases d'initiation et de propagation du glissement. Pour illustrer cette méthodologie, nous l'avons appliquée à la modélisation d'un exemple hypothétique d'avalanche déclenchée par la montée progressive du niveau d'une nappe d'eau.
https://tel.archives-ouvertes.fr/tel-00311303

tel-00311303
https://tel.archives-ouvertes.fr/tel-00311303
https://tel.archives-ouvertes.fr/tel-00311303/document
https://tel.archives-ouvertes.fr/tel-00311303/file/these_estrada.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The dating of alluvial landforms by cosmogenic nuclides requires distinguishing the pre-deposition inheritance from the post-deposition history of the clasts in the studied marker. Moreover, estimating catchment-scale erosion rates from the concentrations of cosmogenic nuclides in active alluvia requires a good knowledge of the local/regional relationships between rock exhumation and transport through space and time. This is still poorly known for timescales of tens of thousand years. In order to document the evolution of clast exhumation and transport rates through time, we analyze in situ 10Be concentrations in boulders and cobbles from hillslopes to outlet of an arid mountainous catchment located in Gobi-Altay, Mongolia, strongly affected by global climatic changes during the Pleistocene-Holocene period. Samples were collected on bedrock, abandoned alluvial deposits, active colluvia and alluvia. Our results show a large 10Be scattering in the active river bed, consistent with a low and discontinuous catchment erosion rate dominated by mass wasting and fluvial incision. On the contrary, pre-exposure signal within abandoned terraces is much more homogeneous, consistent with climatic pulses responsible of strong erosional events on hillslopes and rapid fluvial transport. These results show that exhumation/transport processes at the catchment scale vary in style and intensity through time as a consequence of climatic oscillations. The occurrence of abrupt climatic changes during short periods of time recorded by 10Be concentrations in abandoned alluvia raise questions about the temporal applicability of catchment erosion rates derived from cosmogenic nuclide concentrations measured in sediments of active rivers. On the other hand, strong and short erosion events limit and homogenize the pre-exposure 10Be signal in associated deposits like debris-flows, making them particularly suitable markers for dating in active tectonic and paleoclimatic studies.
ISSN: 0169-555X

hal-00626702
https://hal.archives-ouvertes.fr/hal-00626702
https://hal.archives-ouvertes.fr/hal-00626702/document
https://hal.archives-ouvertes.fr/hal-00626702/file/GEOMOR-2485R1_corrected.pdf
DOI : 10.1016/j.geomorph.2011.07.023

Éditeur(s) : HAL CCSD MDPI
Résumé : International audience
Canopy height is a key variable in tropical forest functioning and for regional carbon inventories. We investigate the spatial structure of the canopy height of a tropical forest, its relationship with environmental physical covariates, and the implication for tropical forest height variation mapping. Making use of high-resolution maps of LiDAR-derived Digital Canopy Model (DCM) and environmental covariates from a Digital Elevation Model (DEM) acquired over 30,000 ha of tropical forest in French Guiana, we first show that forest canopy height is spatially correlated up to 2500 m. Forest canopy height is significantly associated with environmental variables, but the degree of correlation varies strongly with pixel resolution. On the whole, bottomland forests generally have lower canopy heights than hillslope or hilltop forests. However, this global picture is very noisy at local scale likely because of the endogenous gap-phase forest dynamic processes. Forest canopy height has been predictively mapped across a pixel resolution going from 6 m to 384 m mimicking a low resolution case of 3 points·km −2. Results of canopy height mapping indicated that the error for spatial model with environment effects decrease from 8.7 m to 0.91 m, depending of the pixel resolution. Results suggest that, outside the calibration plots, the contribution of environment in shaping the global canopy height distribution is quite limited. This prevents accurate canopy height mapping based only on environmental information, and suggests that precise canopy height maps, for local management purposes, can only be obtained with direct LiDAR monitoring.
ISSN: 2072-4292

hal-01590726
https://hal-univ-guyane.archives-ouvertes.fr/hal-01590726
https://hal-univ-guyane.archives-ouvertes.fr/hal-01590726/document
https://hal-univ-guyane.archives-ouvertes.fr/hal-01590726/file/remotesensing-08-00747.pdf
DOI : 10.3390/rs8090747

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
The interplay between tectonics and erosion has a predominant control on the evolution of the morphology of mountain belts. Here we investigate the modalities of deformation in Central Nepal on a c. 100 ka time scale in response to tectonic and external forcings, through the use of a finite-element thermomechanical model coupled with an integrative denudation formulation that accounts for fluvial incision and hillslope landsliding. We study the complex coupling existing between tectonics and erosion, with special emphasis on the influences of rock strength and rainfall distributions. Our results underline the key role played by lithologic variations in the elevation of both rivers and mean topography. We show that the location of the Main Frontal Thrust is mainly controlled by the low erodability of the unconsolidated sandstone in the Siwaliks Hills. As previously suspected (Burbank et al. 2003), our simulations demonstrate that the pattern of uplift in Nepal is mainly dependent on both erodability and fault geometry, rather than on rainfall distribution.
ISSN: 2041-4927

hal-01543331
https://hal-amu.archives-ouvertes.fr/hal-01543331
DOI : 10.1144/GSL.SP.2006.253.01.18

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We developed a new granular material (MatIV) to study experimentally landscape evolution in active mountain belt piedmonts. Its composition and related physical properties have been determined using empirical criteria derived from the scaling of deformation, erosion-transport and sedimentation natural processes. MatIV is a water-saturated composite material made up with 4 granular components (silica powder, glass microbeads, plastic powder and graphite) whose physical, mechanical and erosion-related properties were measured with different laboratory tests. Mechanical measurements were made on a modified Hubbert-type direct shear apparatus. Erosion-related properties were determined using an experimental set-up that allows quantifying the erosion/sedimentation budget from tilted relaxation topographies. For MatIV, we also investigated the evolution of mean erosion rates and stream power erosion law exponents in 1D as a function of slope.;Our results indicate that MatIV satisfies most of the defined criteria. It deforms brittlely according to the linear Mohr-Coulomb failure criterion and localizes deformation along discrete faults. Its erosion pattern is characterized by realistic hillslope and channelized processes (slope diffusion, mass wasting, channel incision). During transport, eroded particles are sorted depending on their density and shape, which results in stratified alluvial deposits displaying lateral fades variations. To evaluate the degree of similitude between model and nature, we used a new experimental device that combines accretionary wedge deformation mechanisms and surface runoff erosion processes. Results indicate that MatIV succeeded in producing detailed morphological and sedi-mentological features (drainage basin, channel network, terrace, syntectonic alluvial fan). Geometric, kinematic and dynamic similarity criteria have been investigated to compare precisely model to nature. Although scaling is incomplete, it yields particularly informative orders of magnitude. With all these characteristics, MatIV appears as a very promising material to investigate experimentally a wide range of scientific questions dealing with relief dynamics and interactions between tectonics, erosion and sedimentation processes.
ISSN: 0040-1951

hal-00669904
https://hal.archives-ouvertes.fr/hal-00669904
DOI : 10.1016/j.tecto.2011.09.029

Éditeur(s) : HAL CCSD Springer Verlag
Résumé :  
A closed depression is defined as a geomorphologic element where a sediment depository is encircled by hillslopes. Despite the fact that closed depressions are often the only stagnant water points in many European landscapes, few ecological researches on their plant assemblages have been done. The main goal of this study was to give first results of the environmental factors responsible for the vegetation composition, richness and rarity in the closed depressions of the Lorraine biogeographical district (Belgium, France and grand-duche de Luxembourg). We surveyed for plant presence 85 forest and 77 grassland closed depressions. For each site, wetland area, local environmental factors and regional connectivities registered. For each species, the Ellenberg values were compiled. To investigate the main source of variation in species composition and in species richness (including richness in rare species), Non-metric Multidimensional Scaling analyses and Generalized Linear Models were respectively used. Species pools in forest (forest and preforest species) and in grassland (bog plants, pioneers, helophytes) were quite different. In both landscapes, a gradient from plants typical of basic high-productive soils to plants typical of acid low-productive soils reflects a shared successional gradient. The accumulation of organic matter allowed the establishment of Sphagnum spp., which slowly acidified the soil and thus acted as ecosystem engineers for the arrival of bog plants. Moreover, the species composition was additionally driven by the plant light tolerance in forests and by the plant water requirements in grasslands. Mechanisms of species accumulation (increase in species richness) were different in forests and in grasslands: respectively related to the plant light tolerance and to the wetland area. At the regional level, the averaged soil productivity was negatively related to the richness in rare species. Indeed, perennial highly-competitive plants such as Glyceria spp., Iris pseudacorus or Urtica dioica impeded the establishment of smaller and rarer species. At the habitat level, isolated closed depressions (due to either low connectivity or low grazing pressure) have more habitat rare species, giving evidences of dispersal limitation in plant assemblages of closed depressions.
ISSN: 0960-3115

hal-01032125
https://hal.archives-ouvertes.fr/hal-01032125
DOI : 10.1007/s10531-007-9227-x

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Coupling between erosion and tectonics is thought to play a determinant role in orogenic evolution. Here, we investigate the interplay in this coupling between the assumed erosion law and the crustal rheology at the margin of a collisional plateau, like the Himalaya of Central Nepal. Lithospheric deformation is calculated over a time scale of 100 kyr by a 2D finite element model that incorporates the rheological layering of the crust and the main features of the convergence across the range. For the upper boundary condition, two surface processes were tested: a linear diffusion model and a 1D1/2 integrative model including fluvial incision along the fluvial network and hillslope erosion by landsliding. Model results and their sensitivity to the chosen combinations of erosion law and crustal properties are discussed in light of the constraining geologic and geomorphologic observations. In contrast with the conclusions of Cattin and Avouac [2000] , where a compliant quartz-rich crustal rheology and diffusion law were required, we combine a composite quartz-diabase rheology for the crust with fluvial incision erosion law to account for erosion and elevation profiles across the Himalaya of Central Nepal. More generally, it is proposed that, because of the interplay between the dominant denudation conditions and the rheology of the crust, both well documented erosion rates and processes can provide significant constraints on crustal properties within an active orogen.
ISSN: 0094-8276

hal-00788697
https://hal.archives-ouvertes.fr/hal-00788697
https://hal.archives-ouvertes.fr/hal-00788697/document
https://hal.archives-ouvertes.fr/hal-00788697/file/godard_et_al.pdf
DOI : 10.1029/2004GL021006

Éditeur(s) : HAL CCSD
Résumé : Among erosion processes, river incision is classicaly described as a key process controlling erosion of landscapes. Incision efficiency is mainly influenced by climate and erodibility. This latter is not only dependent on the nature of the bedrock, but also on its past deformation, which affects its rheological effective properties, such as fracture density. The main objectives of this thesis are: (1) to better constrain the relationship between effective properties and erodibility, and (2) to quantify the influence of erodibility and erosion on both the temporal and spatial building or decay of the topography. Several numerical tools are developed. A 1D formalism of landscape evolution is introduced, including river incision with stochastic distribution of water discharge and hillslope landsliding. A new remeshing algorithm called Surface Lagrangian Remeshing (SLR) is developed as a complement to remeshing algorithms dealing with internal elements. It allows one to take into account long-term erosion into 2D Lagrangian numerical codes based on triangular finite elements. Then the potentiality of measuring erodibility in-situ using a Schmidt hammer (R) is assessed for the active orogen of Taiwan, the diagenetic Annot sandstones and St Clement fault zone. Results suggest a strong control of R by effective properties. A linear model based on effective medium theory is applied to a fault zone with an unmacthed resolution (750 measures, 25 measures per square meter). The model successfully correlates R to fracture density. These results demonstrate that effective elasticity as well as erodibility are sensitive to the density and type of fractures. Finally I focus on the erosional and rheological conditions that allows reproducing post-orogenic evolution of mountain belts. A model coupling surface erosion and regional isostatic uplift is consistent with observations. The topographic decay and decrease of the ratio of surface elevation over crustal root thickness is at first order controlled by the initial geometry of the mountain belt and erosion efficiency. This new model highlights the control ofclimate and erodibility on the topographic decay and of lithospheric rheology on the perseverance of crustal roots.
Parmi les processus d'érosion, l'incision des rivières est classiquement décrit comme un processus clé contrôlant l'érosion des paysages. L'efficacité de l'incision est principalement influencée par le climat et par l'érodabilité. Ce dernier paramètre ne dépend pas seulement de la nature du substratum rocheux, mais aussi de sa déformation passée qui affecte ses propriétés rhéologiques équivalentes. Les principaux objectifs de cette thèse sont: (1) de mieux contraindre les relations entre propriétés équivalentes et érodabilité, et (2) de quantifier l'influence de l'érosion et de l'érodabilité sur la formation ou la décadence, spatiale et temporelle, de la topographie. Plusieurs outils numériques sont développés. Un formalisme 1D d'évolution des paysages est proposé, prenant en compte simultanément l'incision des rivières avec une distribution stochastique des débits en eau et l'érosion des versants par glissements de terrain. Un nouvel algorithme de remaillage appelé Surface Lagrangian Remeshing (SLR) est développé. Il permet de prendre en compte l'érosion à long terme dans les codes numériques 2D Lagrangiens basés sur des éléments finis triangulaires. Ensuite, la possibilité de mesurer in-situ l'érodabilité avec un marteau de Schmidt (R) est évaluée pour: l'orogène actif de Taiwan, les grès diagénétiques d'Annot et la zone de faille de St Clément. Les résultats suggèrent un fort contrôle de R par les propriétés équivalentes des roches testées. Un modèle linéaire, basé sur la théorie des milieux équivalents, est appliqué à une zone de faille avec une résolution inégalée (750 mesures, 25 mesures par mètre carré). Le modèle permet de corréler avec succès la densité de fracture et R. Ces résultats démontrent empiriquement que l'élasticité équivalente ainsi que l'érodabilité sont sensibles à la densité et à la nature des fractures. Enfin j'étudie les conditions d'érosion et de rhéologie qui permettent de reproduire l'évolution des chaînes de montagnes post-orogéniques. Un modèle couplant érosion en surface et soulèvement isostatique régional est compatible avec les observations. Les taux de décroissance topographique et de diminution du rapport de l'élévation de surface sur l'épaisseur de racine crustale sont contrôlés au premier ordre par la géométrie initiale de la chaîne de montagne et par l'efficacité de l'érosion. Ce nouveau modèle met en évidence le contrôle du climat et de l'érodabilité sur la décroissance topographique et de la rhéologie lithosphérique sur la persévérance des racines crustales.
https://tel.archives-ouvertes.fr/tel-00602341

tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341/document
https://tel.archives-ouvertes.fr/tel-00602341/file/thesephilippesteer.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : The acquisition of reliable data sets representative of hydrological regimes and their variations is a critical concern for water resource assessment. For the subsurface, traditional approaches based on probe measurements, core analysis, and well data can be laborious, expensive, and highly intrusive, while only yielding sparse data sets. For this study, an innovative field survey, merging relative microgravimetry, magnetic resonance soundings, and hydrological measurements, was conducted to evaluate both surface and subsurface water storage variations in a semiarid Sahelian area. The instrumental setup was implemented in the lower part of a typical hillslope feeding to a temporary pond. Weekly measurements were carried out using relative spring gravimeters during 3 months of the rainy season in 2009 over a 350 × 500 m2 network of 12 microgravity stations. Gravity variations of small to medium amplitude (≤220 nm s−2) were measured with accuracies better than 50 nm s−2, revealing significant variations of the water storage at small time (from 1 week up to 3 months) and space (from a couple of meters up to a few hundred meters) scales. Consistent spatial organization of the water storage variations were detected, suggesting high infiltration at the outlet of a small gully. The comparison with hydrological measurements and magnetic resonance soundings involved that most of the microgravity variations came from the heterogeneity in the vadose zone. The results highlight the potential of time lapse microgravity surveys for detecting intraseasonal water storage variations and providing rich space-time data sets for process investigation or hydrological model calibration/evaluation
ISSN: 0043-1397

hal-00857351
https://hal.archives-ouvertes.fr/hal-00857351
DOI : 10.1002/wrcr.20235

Éditeur(s) : HAL CCSD
Résumé :  
A closed depression is defined as a geomorphologic element where a sediment depository is encircled by hillslopes. Despite the fact that closed depressions are often the only stagnant water points in many European landscapes, few ecological researches on their plant assemblages have been done. The main goal of this study was to give first results of the environmental factors responsible for the vegetation composition, richness and rarity in the closed depressions of the Lorraine biogeographical district (Belgium, France and grand-duche de Luxembourg). We surveyed for plant presence 85 forest and 77 grassland closed depressions. For each site, wetland area, local environmental factors and regional connectivities registered. For each species, the Ellenberg values were compiled. To investigate the main source of variation in species composition and in species richness (including richness in rare species), Non-metric Multidimensional Scaling analyses and Generalized Linear Models were respectively used. Species pools in forest (forest and preforest species) and in grassland (bog plants, pioneers, helophytes) were quite different. In both landscapes, a gradient from plants typical of basic high-productive soils to plants typical of acid low-productive soils reflects a shared successional gradient. The accumulation of organic matter allowed the establishment of Sphagnum spp., which slowly acidified the soil and thus acted as ecosystem engineers for the arrival of bog plants. Moreover, the species composition was additionally driven by the plant light tolerance in forests and by the plant water requirements in grasslands. Mechanisms of species accumulation (increase in species richness) were different in forests and in grasslands: respectively related to the plant light tolerance and to the wetland area. At the regional level, the averaged soil productivity was negatively related to the richness in rare species. Indeed, perennial highly-competitive plants such as Glyceria spp., Iris pseudacorus or Urtica dioica impeded the establishment of smaller and rarer species. At the habitat level, isolated closed depressions (due to either low connectivity or low grazing pressure) have more habitat rare species, giving evidences of dispersal limitation in plant assemblages of closed depressions.
7th INTECOL International Wetland Conference
Utrecht, Netherlands

hal-01032381
https://hal.archives-ouvertes.fr/hal-01032381