Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We present a 2-D Contact Dynamics discrete element model for simulating initiation and motion of rock avalanches, integrating hillslope geometry, Mohr-Coulomb rock behavior, pore pressure before avalanche triggering, and avalanche trigger. Avalanche motion is modeled as a dense granular flow of dry frictional and cohesive particles. On the basis of granular physics and shear experiments, we review some of the theories for the unexpectedly long runout of rock avalanches. Different causes are evoked, according to the strength (strong or weak) of the slip surface relative to the bulk. "Mechanical fluidization'' and "acoustic fluidization'' theories state that agitation of rock particles reduces frictional strength, increasing runout. Conversely, granular mechanics suggests that, as "shear-strain'' rate increases, granular material becomes more agitated, more dissipative, and more resistant. Another theory states that dynamic fragmentation of clasts creates an isotropic pressure that drives longer runout. In contrast, granular mechanics suggests that fragmentation may induce fluidization and strengthening of the granular material, while particle size reduction (among others) induces weakening of the granular flow and enhances long runout. Runout is also enhanced for column-like rock masses collapsing from steep hillslopes. Long runout may also be linked to thermal weakening mechanisms at the slip surface (e.g., thermal pressurization, and shear melting), which may lower drastically the shear strength. The model is illustrated with a hypothetical example of a rain-triggered avalanche, mobilizing shallowly dipping layers. Several phases are identified, including slope failure, avalanche triggering resulting from slip weakening, and avalanche motion in which rocks are folded and sheared.
ISSN: 0148-0227

hal-00420883
https://hal.archives-ouvertes.fr/hal-00420883
DOI : 10.1029/2008JF001072

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The dating of alluvial landforms by cosmogenic nuclides requires distinguishing the pre-deposition inheritance from the post-deposition history of the clasts in the studied marker. Moreover, estimating catchment-scale erosion rates from the concentrations of cosmogenic nuclides in active alluvia requires a good knowledge of the local/regional relationships between rock exhumation and transport through space and time. This is still poorly known for timescales of tens of thousand years. In order to document the evolution of clast exhumation and transport rates through time, we analyze in situ 10Be concentrations in boulders and cobbles from hillslopes to outlet of an arid mountainous catchment located in Gobi-Altay, Mongolia, strongly affected by global climatic changes during the Pleistocene-Holocene period. Samples were collected on bedrock, abandoned alluvial deposits, active colluvia and alluvia. Our results show a large 10Be scattering in the active river bed, consistent with a low and discontinuous catchment erosion rate dominated by mass wasting and fluvial incision. On the contrary, pre-exposure signal within abandoned terraces is much more homogeneous, consistent with climatic pulses responsible of strong erosional events on hillslopes and rapid fluvial transport. These results show that exhumation/transport processes at the catchment scale vary in style and intensity through time as a consequence of climatic oscillations. The occurrence of abrupt climatic changes during short periods of time recorded by 10Be concentrations in abandoned alluvia raise questions about the temporal applicability of catchment erosion rates derived from cosmogenic nuclide concentrations measured in sediments of active rivers. On the other hand, strong and short erosion events limit and homogenize the pre-exposure 10Be signal in associated deposits like debris-flows, making them particularly suitable markers for dating in active tectonic and paleoclimatic studies.
ISSN: 0169-555X

hal-00626702
https://hal.archives-ouvertes.fr/hal-00626702
https://hal.archives-ouvertes.fr/hal-00626702/document
https://hal.archives-ouvertes.fr/hal-00626702/file/GEOMOR-2485R1_corrected.pdf
DOI : 10.1016/j.geomorph.2011.07.023

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
The interplay between tectonics and erosion has a predominant control on the evolution of the morphology of mountain belts. Here we investigate the modalities of deformation in Central Nepal on a c. 100 ka time scale in response to tectonic and external forcings, through the use of a finite-element thermomechanical model coupled with an integrative denudation formulation that accounts for fluvial incision and hillslope landsliding. We study the complex coupling existing between tectonics and erosion, with special emphasis on the influences of rock strength and rainfall distributions. Our results underline the key role played by lithologic variations in the elevation of both rivers and mean topography. We show that the location of the Main Frontal Thrust is mainly controlled by the low erodability of the unconsolidated sandstone in the Siwaliks Hills. As previously suspected (Burbank et al. 2003), our simulations demonstrate that the pattern of uplift in Nepal is mainly dependent on both erodability and fault geometry, rather than on rainfall distribution.
ISSN: 2041-4927

hal-01543331
https://hal-amu.archives-ouvertes.fr/hal-01543331
DOI : 10.1144/GSL.SP.2006.253.01.18

Éditeur(s) : HAL CCSD
Résumé : Among erosion processes, river incision is classicaly described as a key process controlling erosion of landscapes. Incision efficiency is mainly influenced by climate and erodibility. This latter is not only dependent on the nature of the bedrock, but also on its past deformation, which affects its rheological effective properties, such as fracture density. The main objectives of this thesis are: (1) to better constrain the relationship between effective properties and erodibility, and (2) to quantify the influence of erodibility and erosion on both the temporal and spatial building or decay of the topography. Several numerical tools are developed. A 1D formalism of landscape evolution is introduced, including river incision with stochastic distribution of water discharge and hillslope landsliding. A new remeshing algorithm called Surface Lagrangian Remeshing (SLR) is developed as a complement to remeshing algorithms dealing with internal elements. It allows one to take into account long-term erosion into 2D Lagrangian numerical codes based on triangular finite elements. Then the potentiality of measuring erodibility in-situ using a Schmidt hammer (R) is assessed for the active orogen of Taiwan, the diagenetic Annot sandstones and St Clement fault zone. Results suggest a strong control of R by effective properties. A linear model based on effective medium theory is applied to a fault zone with an unmacthed resolution (750 measures, 25 measures per square meter). The model successfully correlates R to fracture density. These results demonstrate that effective elasticity as well as erodibility are sensitive to the density and type of fractures. Finally I focus on the erosional and rheological conditions that allows reproducing post-orogenic evolution of mountain belts. A model coupling surface erosion and regional isostatic uplift is consistent with observations. The topographic decay and decrease of the ratio of surface elevation over crustal root thickness is at first order controlled by the initial geometry of the mountain belt and erosion efficiency. This new model highlights the control ofclimate and erodibility on the topographic decay and of lithospheric rheology on the perseverance of crustal roots.
Parmi les processus d'érosion, l'incision des rivières est classiquement décrit comme un processus clé contrôlant l'érosion des paysages. L'efficacité de l'incision est principalement influencée par le climat et par l'érodabilité. Ce dernier paramètre ne dépend pas seulement de la nature du substratum rocheux, mais aussi de sa déformation passée qui affecte ses propriétés rhéologiques équivalentes. Les principaux objectifs de cette thèse sont: (1) de mieux contraindre les relations entre propriétés équivalentes et érodabilité, et (2) de quantifier l'influence de l'érosion et de l'érodabilité sur la formation ou la décadence, spatiale et temporelle, de la topographie. Plusieurs outils numériques sont développés. Un formalisme 1D d'évolution des paysages est proposé, prenant en compte simultanément l'incision des rivières avec une distribution stochastique des débits en eau et l'érosion des versants par glissements de terrain. Un nouvel algorithme de remaillage appelé Surface Lagrangian Remeshing (SLR) est développé. Il permet de prendre en compte l'érosion à long terme dans les codes numériques 2D Lagrangiens basés sur des éléments finis triangulaires. Ensuite, la possibilité de mesurer in-situ l'érodabilité avec un marteau de Schmidt (R) est évaluée pour: l'orogène actif de Taiwan, les grès diagénétiques d'Annot et la zone de faille de St Clément. Les résultats suggèrent un fort contrôle de R par les propriétés équivalentes des roches testées. Un modèle linéaire, basé sur la théorie des milieux équivalents, est appliqué à une zone de faille avec une résolution inégalée (750 mesures, 25 mesures par mètre carré). Le modèle permet de corréler avec succès la densité de fracture et R. Ces résultats démontrent empiriquement que l'élasticité équivalente ainsi que l'érodabilité sont sensibles à la densité et à la nature des fractures. Enfin j'étudie les conditions d'érosion et de rhéologie qui permettent de reproduire l'évolution des chaînes de montagnes post-orogéniques. Un modèle couplant érosion en surface et soulèvement isostatique régional est compatible avec les observations. Les taux de décroissance topographique et de diminution du rapport de l'élévation de surface sur l'épaisseur de racine crustale sont contrôlés au premier ordre par la géométrie initiale de la chaîne de montagne et par l'efficacité de l'érosion. Ce nouveau modèle met en évidence le contrôle du climat et de l'érodabilité sur la décroissance topographique et de la rhéologie lithosphérique sur la persévérance des racines crustales.
https://tel.archives-ouvertes.fr/tel-00602341

tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341/document
https://tel.archives-ouvertes.fr/tel-00602341/file/thesephilippesteer.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We developed a new granular material (MatIV) to study experimentally landscape evolution in active mountain belt piedmonts. Its composition and related physical properties have been determined using empirical criteria derived from the scaling of deformation, erosion-transport and sedimentation natural processes. MatIV is a water-saturated composite material made up with 4 granular components (silica powder, glass microbeads, plastic powder and graphite) whose physical, mechanical and erosion-related properties were measured with different laboratory tests. Mechanical measurements were made on a modified Hubbert-type direct shear apparatus. Erosion-related properties were determined using an experimental set-up that allows quantifying the erosion/sedimentation budget from tilted relaxation topographies. For MatIV, we also investigated the evolution of mean erosion rates and stream power erosion law exponents in 1D as a function of slope.;Our results indicate that MatIV satisfies most of the defined criteria. It deforms brittlely according to the linear Mohr-Coulomb failure criterion and localizes deformation along discrete faults. Its erosion pattern is characterized by realistic hillslope and channelized processes (slope diffusion, mass wasting, channel incision). During transport, eroded particles are sorted depending on their density and shape, which results in stratified alluvial deposits displaying lateral fades variations. To evaluate the degree of similitude between model and nature, we used a new experimental device that combines accretionary wedge deformation mechanisms and surface runoff erosion processes. Results indicate that MatIV succeeded in producing detailed morphological and sedi-mentological features (drainage basin, channel network, terrace, syntectonic alluvial fan). Geometric, kinematic and dynamic similarity criteria have been investigated to compare precisely model to nature. Although scaling is incomplete, it yields particularly informative orders of magnitude. With all these characteristics, MatIV appears as a very promising material to investigate experimentally a wide range of scientific questions dealing with relief dynamics and interactions between tectonics, erosion and sedimentation processes.
ISSN: 0040-1951

hal-00669904
https://hal.archives-ouvertes.fr/hal-00669904
DOI : 10.1016/j.tecto.2011.09.029

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Coupling between erosion and tectonics is thought to play a determinant role in orogenic evolution. Here, we investigate the interplay in this coupling between the assumed erosion law and the crustal rheology at the margin of a collisional plateau, like the Himalaya of Central Nepal. Lithospheric deformation is calculated over a time scale of 100 kyr by a 2D finite element model that incorporates the rheological layering of the crust and the main features of the convergence across the range. For the upper boundary condition, two surface processes were tested: a linear diffusion model and a 1D1/2 integrative model including fluvial incision along the fluvial network and hillslope erosion by landsliding. Model results and their sensitivity to the chosen combinations of erosion law and crustal properties are discussed in light of the constraining geologic and geomorphologic observations. In contrast with the conclusions of Cattin and Avouac [2000] , where a compliant quartz-rich crustal rheology and diffusion law were required, we combine a composite quartz-diabase rheology for the crust with fluvial incision erosion law to account for erosion and elevation profiles across the Himalaya of Central Nepal. More generally, it is proposed that, because of the interplay between the dominant denudation conditions and the rheology of the crust, both well documented erosion rates and processes can provide significant constraints on crustal properties within an active orogen.
ISSN: 0094-8276

hal-00788697
https://hal.archives-ouvertes.fr/hal-00788697
https://hal.archives-ouvertes.fr/hal-00788697/document
https://hal.archives-ouvertes.fr/hal-00788697/file/godard_et_al.pdf
DOI : 10.1029/2004GL021006