Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
An increasing number of field examples in mountain belts show that the formation of passive margins during extreme continent thinning may occur under conditions of high to very high thermal gradient beneath a thin cover of syn-rift sediments. Orogenic belts resulting from the tectonic inversion of distal margins and regions of exhumed continental mantle may exhibit high-temperature, low-pressure (HT-LP) metamorphism and coeval syn-extensional, ductile deformation. Recent studies have shown that the northern flank of the Pyrenean belt, especially the North Pyrenean Zone, is one of the best examples of such inverted hot, passive margin. In this study, we provide a map of HT-LP metamorphism based on a data set of more than 100 peak-temperature estimates obtained using Raman spectroscopy of the carbona-ceous material (RSCM). This data set is completed by previous PT (pressure and temperature) estimates based on mineral assemblages, and new 40 Ar– 39 Ar (amphibole, micas) and U–Pb (titanite) ages from metamorphic and magmatic rocks of the North Pyrenean Zone. The implications on the geological evolution of the Cretaceous Pyrenean paleomar-gins are discussed. Ages range mainly from 110 to 90 Ma, and no westward or eastward propagation of the metamor-phism and magmatism can be clearly identified. In contrast, the new data reveal a progressive propagation of the thermal anomaly from the base to the surface of the continental crust. Focusing on the key localities of the Mauléon basin, Arguenos–Moncaup, Lherz, Boucheville and the Bas-Agly, we analyze the thermal conditions prevailing during the Cre-taceous crustal thinning. The results are synthetized into a series of three regional thematic maps and into two detailed maps of the Arguenos–Moncaup and Lherz areas. The results indicate a first-order control of the thermal gradient by the intensity of crustal thinning. The highest grades of metamor-phism are intimately associated with the areas where subcon-tinental mantle rocks have been unroofed or exhumed.
ISSN: 1869-9510

insu-01161826
https://hal-insu.archives-ouvertes.fr/insu-01161826
https://hal-insu.archives-ouvertes.fr/insu-01161826/document
https://hal-insu.archives-ouvertes.fr/insu-01161826/file/PL03457.pdf
DOI : 10.5194/se-6-643-2015

Éditeur(s) : HAL CCSD Elsevier
Résumé : The seismic characteristics of focused fluid-related features such as pockmarks and carbonate build-ups on the Nigerian continental slope have been investigated using complementary seismic data sets (reprocessed 3D exploration data and 2D Very High Resolution hull-mounted and near-bottom seismic data) coupled with the results of previous studies (sedimentological, geotechnical and geochemical analyses).The results show different types of fluid-related features within the hemipelagic phase of long duration (∼1 Myr) Turbidite/Hemipelagic cycles. They are the product of the disturbance of the hosting sediments following two main distinct processes: (1) no or low sediment deposition caused by fluid escape associated with seafloor settlement (benthic fauna, carbonate precipitation, gas hydrate formation) and (2) post-depositional erosion, caused either by fluid release (dewatering from underlying features such as channels and upward migration from a deep source) or by collapse (destabilisation of gas hydrates). The temporal evolution reveals a decrease in fluid flow during the hemipelagic deposition as witnessed by the decrease in methanogenic activity and by gas hydrate destabilisation. The spatial distribution of fluid-related features seems to be controlled by the type of fault (small fault or structural lineament).
ISSN: 0264-8172

hal-01685513
https://hal.archives-ouvertes.fr/hal-01685513
DOI : 10.1016/j.marpetgeo.2017.10.004

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : This study describes normal fault zones formed in foreland arkosic turbidites (the Grès d'Annot Formation, SW French Alps) under deep diagenesis conditions (~200 °C) and highlights the occurrence of two markedly different fault-rock types: (1) the foliated fault rocks of the Moutière-Restefond area; and (2) the dilatant fault rocks of the Estrop area. The deformation of (1) is dominated by intra- and transgranular fracturing, pressure solution of quartz and feldspar grains and syn-kinematic phyllosilicate precipitation resulting from feldspar alteration. The combination of these mechanisms results in a strongly anisotropic strain with intense shortening normal to the foliation (pressure solution) and extension parallel to the foliation (quartz- and calcite-sealed extension veins). This deformation implies local mass transfer that may be achieved without (or with limited) volume change. The deformation of (2) is expressed as dilatant quartz-sealed veins and breccia textures in which the main mechanisms are transgranular fracturing and quartz precipitation. Type (2) implies fault volume increase, isotropy of deformation and mass transfer at distances larger than in type (1). This study discusses the origins of (1) and (2) and shows that the permeability of (1) is anisotropic, with higher values than the host rocks parallel to the Y main deformation axis (i.e. perpendicular to the slip vector), whereas the permeability of (2) is isotropic and equivalent to that of the host rocks.
ISSN: 0954-4879

hal-01115177
https://hal.archives-ouvertes.fr/hal-01115177
DOI : 10.1111/ter.12100

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The interplay between fault zone cataclasis and cementation is important since both processes can drastically reduce the permeability of faults in porous sandstones. Yet the prediction of fault cementation in high-porosity sandstone reservoirs remains elusive. Nevertheless, this process has rarely been investigated in shallowly buried faults (<2 km; T°<80 °C) where its sealing capacity could be acquired early in the geological history of a reservoir. In this paper, the macro- and microscopic analysis of a fault zone in the porous Cenomanian quartz arenite sands of Provence (France) shows that silica diagenesis occurs in the most intensely-deformed cataclastic parts of the fault zone. This fault zone shows 19–48% of its total thickness occupied by low-porosity quartz-cemented cataclastic shear bands whose porosities range from 0 – ca. 5%. The analysis of the weathering profile around the fault zone reveals the presence of groundwater silcretes in the form of tabular, tightly silicified concretions cross-cut by the fault. Detailed transmitted light, cold-cathodoluminescence and scanning electron microscopy analyses of the silica cements (from the fault and the silcrete) reveal that all the silica cements originate from groundwater diagenetic processes. This study therefore shows that silica cementation can occur specifically in fault zones and as groundwater silcrete in the shallow context of a groundwater system, generated at the vicinity of an erosional unconformity.
ISSN: 0191-8141

hal-01278286
https://hal.archives-ouvertes.fr/hal-01278286
DOI : 10.1016/j.jsg.2015.10.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Miradouro da Lua cliffs, which are 60 km south of Luanda, record the building and uplift of the late Neogene Palaeo-Cuanza delta. The detailed study of the sedimentary architecture and stacking pattern permitted separation of the pile into five depositional units bounded by erosional surfaces and characterised by separate facies associations (genetic sequences = units in this paper). At the base of the series, aeolian deposits (Unit 1) mark the development of a possible coastal desert during the late Miocene aridification. The major Pliocene sea-level rise (Transgressive Systems Tract) led to the drowning of the continental platform into a discrete shoreface-foreshore sequence (Unit 2), followed by an expanded deltaic sequence (Unit 3) that represents the main outcrop of the area. The sedimentary fabric of this prograding wedge during the Highstand Systems Tract reveals laterally stacked pluri-hectometic mouth bars built by the abrupt switching of a bird-foot delta during the Pliocene highstand. The clinoforms are deeply incised by submarine gullies filled both by periodic river-driven turbidite and tidal currents (Unit 4) during the coeval growing of the delta. The topset of the prograding wedge and associated gullies infill is truncated by an overall erosional unconformity that marks the widespread development of an extensive braid-delta system (Unit 5) during the lower Pleistocene sea-level drop (Lowstand Systems Tract). The last 6 m of the Braid-delta unit is overprinted by a ferallitic profile, forming the surface of the plateau and indicating long-term subaerial exposure and weathering processes consistent with the maximum warming of the middle to late Pleistocene interglacial periods. The successive abrupt shifts of the depositional systems through the sedimentary pile indicate a high-amplitude sea level amplified by major coastal uplifts and the reorganisation of the fluvial network. In this context, the palaeo-Cuanza prograding wedge signals the westward tilting and 60 m total uplift of the coastal plain during the Pliocene. A new uplift pulse by differential tilt and slope increase is deduced from the widespread development of the braid-delta complex during the early Pleistocene. The last tectonic event corresponds to the 80- to 100-m uplift and ferallitic paedogenesis during the middle to late Pleistocene interglacial stages.
ISSN: 0899-5362

hal-01053716
https://hal.archives-ouvertes.fr/hal-01053716
DOI : 10.1016/j.jafrearsci.2014.01.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Demerara plateau, located offshore French Guiana and Suriname, is part of a passive transform continental margin particularly prone to develop slope instabilities, probably in relation to the presence of a free distal border along its steep continental slope. Slope failure occurred at different periods (Cretaceous to Neogene) and shows an overall retrogressive evolution through time. Upslope these failure headscarp, an enigmatic regional Mio-Pliocene unconformity has been discovered through the interpretation of new academic and industrial datasets. The aim of this work is to describe and understand the origin of this surface. Our analysis shows that this unconformity is made of a series of valleys that cross-cut sedimentary strata. Each one of these valleys has a short lateral extent and is closed along two perpendicular directions, which suggests that it could correspond to a highly meandering system, or to some sub-circular depressions. The infill of these features is equivalent to the regional stratigraphic strata found outside the structures, but in a subdued position. This seems to imply that the structures have originated by a local loss of sediments at their base or by sliding processes. Furthermore, these depressions intersect each other through time, while migrating progressively downslope.We discuss a series of hypotheses that try to explain the onset and evolution of these depressions forming the Mio-Pliocene unconformity (Canyons? Slope failures? Contourite moats? Hydrate pockmarks?). Having established that these structures are depressions formed by collapse, and have many similarities with structures recently described in the literature as pockmarks associated with gas hydrate dissolution, we favor this hypothesis.We propose that these hydrate pockmarks form with a mass failure that was triggered by fluid-overpressure development at the base of the hydrate stability zone.
ISSN: 0025-3227

hal-01365920
https://hal.archives-ouvertes.fr/hal-01365920
DOI : 10.1016/j.margeo.2015.04.001