Éditeur(s) : HAL CCSD Cambridge University Press (CUP)
Résumé : International audience
ISSN: 1431-9276

hal-00411439
https://hal.archives-ouvertes.fr/hal-00411439

Éditeur(s) : HAL CCSD IOP Publishing
Résumé : We present the results of an inter-laboratory comparison of EPMA analysis at low voltage (5-6 kV) of three monophasic alloy steel samples. The aim of the work was to obtain an estimate of the present situation of low-voltage analysis of steel and identify needs for improvement. EPMA analyses of the samples were conducted by seven participant groups using electron microprobes and scanning electron microscopes of different kind, equipped with wavelength- and/or energy-dispersive X-ray spectrometers, and employing their own methodology of analysis. The results using WDS showed essentially an underestimation of the Cr contents, with relative deviations from the reference values ranging from -0.7 % to -17 %, and an overestimation of Fe and Ni, with relative deviations from the reference composition ranging from -4 % to +30 %, and from +14 % to +42 %, respectively. The relative deviations obtained by using EDS showed larger scatter, ranging from -16 % to +54 % for Cr, -0.4 % to +66 % for Fe and from +13 % to +90 % for Ni. Reasons for the differences observed and the scatter of results are discussed.
ISSN: 1757-8981

hal-00813999
https://hal.archives-ouvertes.fr/hal-00813999
DOI : 10.1088/1757-899X/32/1/012014

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
A calibration method aimed at converting X-ray intensities into absolute units has been tested in different electron microprobes. The calibration requires measurement of the X-ray peak profile and measurement and calculation of the bremsstrahlung intensity emitted from a reference sample, at the energy of the X-ray line of interest. Specifically, measurements of the U M alpha and M beta lines emitted from UO2 and bremsstrahlung intensities emitted from an Al reference sample have been performed on five different instruments. The aim of the work is to determine to what accuracy X-ray intensities emitted from reference samples of actinide elements are transferable among different electron microprobes (virtual standard). The influence of the focussing geometry and different crystals and proportional counters used is analysed. Strategies to reduce the uncertainties affecting the absolute calibration of the studied lines are discussed.
ISSN: 0026-3672

hal-00411437
https://hal.archives-ouvertes.fr/hal-00411437
DOI : 10.1007/s00604-007-0856-2