Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We developed a new granular material (MatIV) to study experimentally landscape evolution in active mountain belt piedmonts. Its composition and related physical properties have been determined using empirical criteria derived from the scaling of deformation, erosion-transport and sedimentation natural processes. MatIV is a water-saturated composite material made up with 4 granular components (silica powder, glass microbeads, plastic powder and graphite) whose physical, mechanical and erosion-related properties were measured with different laboratory tests. Mechanical measurements were made on a modified Hubbert-type direct shear apparatus. Erosion-related properties were determined using an experimental set-up that allows quantifying the erosion/sedimentation budget from tilted relaxation topographies. For MatIV, we also investigated the evolution of mean erosion rates and stream power erosion law exponents in 1D as a function of slope.;Our results indicate that MatIV satisfies most of the defined criteria. It deforms brittlely according to the linear Mohr-Coulomb failure criterion and localizes deformation along discrete faults. Its erosion pattern is characterized by realistic hillslope and channelized processes (slope diffusion, mass wasting, channel incision). During transport, eroded particles are sorted depending on their density and shape, which results in stratified alluvial deposits displaying lateral fades variations. To evaluate the degree of similitude between model and nature, we used a new experimental device that combines accretionary wedge deformation mechanisms and surface runoff erosion processes. Results indicate that MatIV succeeded in producing detailed morphological and sedi-mentological features (drainage basin, channel network, terrace, syntectonic alluvial fan). Geometric, kinematic and dynamic similarity criteria have been investigated to compare precisely model to nature. Although scaling is incomplete, it yields particularly informative orders of magnitude. With all these characteristics, MatIV appears as a very promising material to investigate experimentally a wide range of scientific questions dealing with relief dynamics and interactions between tectonics, erosion and sedimentation processes.
ISSN: 0040-1951

hal-00669904
https://hal.archives-ouvertes.fr/hal-00669904
DOI : 10.1016/j.tecto.2011.09.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The structure and dynamic evolution of a mountain belt piedmont are controlled by strong interactions between tectonics, surface processes (erosion, sedimentation), and climate. Studying these couplings relies on detailed geometric and kinematic analysis of morphostructural markers (folds, faults, terraces, alluvial surfaces) and analysis of syntectonic sedimentation. To study quantitatively how these markers form, evolve and record deformation, we developed a new analogue modelling approach using a specific composite granular material. The originality stands in the simultaneous modelling of orogenic deformation mechanisms and erosion-transport-sedimentation processes, but also in the use of techniques allowing quantitative measurement of morphostructural evolution. This methodology opens new perspectives in the fields of geomorphology (relief dynamics), seismotectonics (study of active faults), and sedimentology (including sequential stratigraphy).
ISSN: 0010-7999

hal-00411972
https://hal.archives-ouvertes.fr/hal-00411972
DOI : 10.1016/j.crte.2008.01.005

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : In the eastern Pyrenees, the lherzolites always outcrop as restricted bodies scattered across Mesozoic sedimentary units along the North Pyrenean fault. In this article, we focus on the sedimentary processes associated with the tectonic exhumation of the mantle rocks during the Lower Cretaceous and we provide a new detailed analysis of the ultramafic-bearing sedimentary sequences associated with the Lherz body. The Lherz body, 1.5 km long only, belongs to a series of ultramafic bodies of restricted size (a few m to some hundred of m), occurring within sedimentary formations composed mostly of carbonate breccias originating from the reworking of Mesozoic platform limestones and dolomites. The carbonate clasts include marbles displaying different evolutions in relation with the Cretaceous thermal metamorphic event. The clastic formations also include numerous layers of polymictic breccias reworking ultramafic clasts. These layers are found far from any peridotitic body, implying that ultramafic clasts have been transported far away from their sources by sedimentary processes after their disaggregation on the seafloor. In addition, clasts of ultramafic-rich breccias and sandstones are also observed which indicates rapid sedimentation and diagenesis within a tectonically active environment. We discuss the significance of these deposits and their bearing on our understanding of the tectono-sedimentary processes associated with mantle exhumation in a context of development of narrow intracontinental basins suffering extreme crustal thinning.
EISSN: 1777-5817

hal-00766884
https://hal.archives-ouvertes.fr/hal-00766884
DOI : 10.2113/gssgfbull.183.5.443

Éditeur(s) : HAL CCSD
Résumé : International audience
Continental erosion and weathering destroy parts of the stratigraphic record. Analyses of the sedimentary filling of paleokarsts help completing the geological record of regions that have been submitted to post-depositional, long-term, continental evolution. Jurassic carbonate platform of Languedoc (South of France) has undergone several karstification phases from Cretaceous to Neogene. Later incision of canyons through the carbonate massifs allows to observe paleokarsts over 400m depth, within the massifs. Paleokarsts are partly filled with sediments. Some have yielded marine bioclasts (echinoderms, radiolars), foraminifera and nannofossils; others are composed of polygenic detrital sediments, including sources from the upstream Paleozoic basement (Cevennes). The age of the filling of successive paleokarsts can be constrained by structural relationships and by biostratigraphy. These findings suggests 1) the marine elements of the karstic filling relate to a Late Cretaceous to Early Paleocene interval, while 2) the Paleozoic basement-sourced-sediments were trapped in the karst during Miocene to Present. Karstic sediment containing Early Paleocene foraminifera and nannofossils are found in paleokarsts cavities distributed across the entire thickness of the carbonate massif (≥350m). This requires base-level lowering and associated karstification, followed by base-level rise and karst filling of at least 350 m amplitude, respectively. The time interval corresponding to the occurrence of foraminifera and nannofossils in karsts covers 10 Myrs ; surprisingly, no equivalent marine sediments are preserved on the surface. In addition, analyses of the different forams species suggests several (up to 3) distinct karstification and marine filling cycles. Finally, sedimentological facies analysis of the karst filling reveals the following succession of processes: low energy settling of mudstone, high energy reworking, transport and deposition of silts and sandstones within the karst system. Integration of geological, paleontological and sedimentological data, leads to a polyphase scenario in response to repeated base-level variations, more than 350m amplitude. Such an amplitude excludes eustacy, and the improbable repeated sequence of uplift and subsidence rules out tectonics, as driving forces for base-level change, respectively. We propose that the high-amplitude base-level changes results from a succession of desiccation-flooding events of an endorheic, silled, basin during Early Paleogene. The later detrital assemblage sourced in the Cevennes occurs on perched paleosurfaces and in karst cavities across the whole 350m-deep canyon walls. When found on paleosurfaces, they correspond to the south-flowing Early Miocene fluvial drainage, and can be correlated downstream with the marine, well dated, Early Miocene, sediments. When found within the karst cavities, they correspond to successive base-level surfaces connected to the progressive incision of the canyon. This canyon incision is coeval with a Late Miocene uplift of the hinterland.
24th International Karstological School "Classical karst" : Paleokarst
Postojna, Slovenia

hal-01306683
https://hal-brgm.archives-ouvertes.fr/hal-01306683
https://hal-brgm.archives-ouvertes.fr/hal-01306683/document
https://hal-brgm.archives-ouvertes.fr/hal-01306683/file/Abstract_IKS.pdf

Éditeur(s) : Elsevier
Résumé : Clinoforms on modern shelves and slopes, as well as in ancient rock records, are widely recognized as a fundamental building element of continental margin growth. Regardless of their dominant lithology, clinoforms are composed of three geometric elements: topset, foreset and bottomset. Traditionally, much emphasis in the study of clinoforms was put on the geometry of the topset, viewed as the most energetic portion of a clinoform and studied to discern if aggradation was active rather than erosional truncation, and on the foreset, the area with the highest sediment accumulation rates. Here we focus on the factors forcing clinoforms to taper out and on the inferred mechanisms for bottomset creation. We base our analysis on muddy shelf clinoforms, a particular class of clinoforms that is typical of low-gradient settings and is characterized by a substantial component of shore-parallel sediment transport. This paper is based on a large dataset of CHIRP-sonar profiles, bathymetric and isopach maps of the Late Holocene clinoform on the Adriatic shelf, where integrated stratigraphic studies from sediment cores allow a very high (in some cases century-scale) chronological resolution. Knowledge on the dominant oceanographic regime affecting sediment dispersal and, ultimately, clinoform development, has been recently refined during the EuroSTRATAFORM collaboration. Muddy clinoforms are markedly three-dimensional features that cannot be entirely understood solely on two-dimensional shore normal sections. We suggest that this class of clinoform is advection dominated and that an increase in the energy regime at the toe of the foreset may prevent sediment from reaching beyond the transition to the bottomset region.
Continental Shelf Research (0278-4343) (Elsevier), 2007-02 , Vol. 27 , N. 3-4 , P. 506-525

Droits : 2006 Elsevier Ltd All rights reserved
http://archimer.ifremer.fr/doc/2007/publication-2409.pdf
DOI:10.1016/j.csr.2006.11.013
http://archimer.ifremer.fr/doc/00000/2409/

Éditeur(s) : Elsevier
Résumé : Analysis of new high-resolution seismic-reflection profiles, chirp profiles and previously published sidescan data, together with piston cores on the Danube Fan provide new insight into the recent sedimentation processes in the deep northwestern Black Sea.The latest channel-levee system on the Danube Fan developed probably during the Neoeuxinian lowstand (oxygene isotope stage 2) in a semi-freshwater basin with a water level about 100 m lower than today. Sediment supplied by the Danube was transported to the deep basin through the Viteaz Canyon, which was directly connected to the leveed channel of this system on the middle slope. Channel avulsion was common in the middle fan, as indicated by four main phases of bifurcation. Each phase developed after the same pattern: breaching of the lower and narrower left levee by turbidity currents, building of a unit of High Amplitude Reflection Packets (HARP) by the unchannelized flow while the former channel was abandoned, followed by initiation of a new meandering leveed channel. The northward migration through successive bifurcations is influenced by the asymmetry between levees, hence by the Coriolis effect. In the lower fan where the levees became too low to maintain a stable pathway for the turbiditic flows, channel migration occurred. Locations of HARPs and channels after bifurcation are controlled by the pre-existing bathymetry. Sedimentary deposits are confined between the high levees of unit 0 (the initial phase of the youngest channel-levee system) to the south, and the steep relief of the Dniepr Fan to the north.The HARPs of the most recent phase of avulsion are the most severely constrained by local topography and form a very narrow elongate structure that is at most half as thick as the previous HARPs. Their distal part is not covered by channel-levee systems and is visible both on sidescan mosaics and on chirp profiles and was sampled in core BLKS 98-20.Sea level controlled fan activity but the evolution of the last channel-levee system with several bifurcations during a single sea level lowstand suggests that the primary control of channel avulsion and sand delivery is probably autocyclic.The presence of important HARP sand bodies in the mud-rich Danube Fan is presumed by analogy with a similar seismic facies on the Amazon Fan and indicated by the sands cored in BLKS98-20. However, only drilling of the HARP units could verify this interpretation.
Marine Geology (0025-3227) (Elsevier), 2001-09 , Vol. 179 , N. 1-2 , P. 25-37

Droits : 2001 Elsevier Science B.V. All rights reserved
http://archimer.ifremer.fr/doc/2001/publication-474.pdf
DOI:10.1016/S0025-3227(01)00197-9
http://archimer.ifremer.fr/doc/00000/474/

Éditeur(s) : Université de Bucarest - Université de Bretagne occidentale
Résumé : This study is focusing on the architecture and recent sedimentary evolution of the Danube channel, the youngest channel-levee system in the Danube deep-sea fan. The study was conducted as part of the BlaSON French-Romanian Project, and combined high-resolution seismic-reflection profiles and chirp profiles with multibeam bathymetry and piston cores. This data set was acquired in 1998 during a joint survey IFREMER-GeoEcoMar of the north-western Black Sea. Previous seismic and acoustic data were also used. The Danube deep-sea fan is a large passive-margin mud-rich fan. Like the other systems of this type (Amazon fan, Mississippi fan or Indus fan) the Danube fan consists of stacked channel-levee systems intercalated with mass-transport deposits. Seismic and sedimentary facies in the Danube fan are similar to those identified in most of the mud-rich systems. Nevertheless, the Danube fan is distinguished by a specific feature: its development in a freshwater environment. This is due to the peculiar water-level history of the Black Sea controlled by the link to the Mediterranean through the Strait of Bosphorus and the Sea of Marmara. This connexion was successively interrupted (during sea level lowstands) and re-established (when the sea level was rising above the Bosphorus). Temporary absence of marine water influx during lowstands together with large freshwater inputs from the Danube and other major rivers changed the Black Sea into a freshwater lake during times of fan activity. This peculiarity possibly favourised the development of hyperpycnal flow at the Danube mouth and the initiation of turbidity currents in the deep-sea fan. The Danube channel is directly connected to the large shelf-indenting Danube canyon (also known as Viteaz canyon). The Danube canyon is deeply incised into the shelf margin for 26 km landward of the shelfbreak. During lowstands this canyon acted as the most important path for sediment supply to the deep sea in this part of the continental margin. It consists of a main trough with steep flanks, and a meandering thalweg cut into the flat canyon floor, attesting for the development of the canyon by erosion in the entrenched axial thalweg. Sections with specific morphology, orientation and gradient identified along the canyon, are interpreted as phases of landward expansion of the canyon. Internal structure of the canyon shows several erosional surfaces, which indicate that the present morphology of the canyon is the result of its polyphasic evolution. Instability in the zone of the canyon is related to the important sediment supply at the Danube mouth, to the presence of the gas in the surficial sediment, and possibly under a structural control. The upper part of the Danube channel (between the Danube canyon and ~1400 m depth) consists in a single leveed-channel that has undergone significant overbank deposition, as attested by the well-developed levees. The levees are strongly asymmetrical, being higher and wider on the right-hand side looking downstream. This type of asymmetry is rather common in deep-sea fans, and is generally attributed to the Coriolis effect (Menard, 1955). The channel is slightly sinuous, partially filled and incised by an entrenched thalweg, connected to the axial thalweg of the Danube canyon. Detailed seismic investigation inside the channel trough documented several depositional phases within the channel fill, separated by erosional surfaces. These surfaces are associated with distinct terraces identified on the multibeam bathymetry, that can be followed downward along the main trough axis. The valley fill deposits (where not removed by the subsequent erosional event) show an axial HAR (High Amplitude Reflections) seismic facies with lateral lower amplitude continuous reflections consisting in a levee facies, as proved by sampling. This indicates that filling up was associated with flow within the channel, and not with interruption of fan activity. On the middle slope below 1400 m, this single channel bifurcates through repeated avulsions. As a result, several highly meandering channels developed. The onlap relationships between these channels indicate that only one channel was active at a time. Each phase of avulsion resulted in a depositional unit consisting in a basal unchannelized lobe defined as High Amplitude Reflection Packets (HARP, Flood et al., 1991) that underlies a channel-levee system. The deposition of HARPs was associated with the readjustment of the longitudinal profile of the channel after the breaching of a levee, which resulted in remobilization of upslope channel deposits and eroded levees. When this adjustment was complete, erosion ceased and levees began to develop above the HARPs (Pirmez et al., 1997). All the identified phases of avulsion followed the same pattern: (1) breaching of the lower and narrower left levee; (2) building of a unit of High Amplitude Reflector Packets (HARP) basinward of the bifurcation point by the unchannelized flow, while the former channel was abandoned; and (3) initiation of a new meandering leveed channel. The northward migration of the resulting units through repeated bifurcations is influenced by the asymmetry between levees (hence by the Coriolis effect), and confined between the high levees of the initial phase of the Danube channel (to the south) and the steep relief of the Dniepr fan (to the north). Structure of the fan valley fill indicate that the erosional surfaces inside the upper channel could be formed in response of successive avulsions, by the adjustment of the longitudinal profile of the channel following the breaching of a levee wall. Sediments removed by erosion formed the HARP lobes basinward of the avulsion point. When this adjustment was complete, a channel-levee system developed downward of the bifurcation, overlying the HARPs, but also upward of this point, as a confined channel-levee system inside the erosional trough of the fan valley. Fluvial incisions identified on the continental shelf, together with the coastline location during the last active period of the Danube channel, indicated that the paleo-Danube was directed towards the head of the Danube canyon. Paleo-Danube mouth was fairly close (ca. 10 km) to the Danube canyon, supplying sediment to the Danube channel. Furthermore, hyperpycnal flow probably prevailed in the freshwater environment that characterized the Black Sea during times of fan activity. These conditions would have enabled the development of a quasi-continuous river-canyon-deep-sea fan system, ensuring the effective transfer of the sediment between the coastal zone and the deep sea.
Ce travail est consacré à l'étude de l'architecture et de l'évolution sédimentaire récente de l'éventail profond du Danube, en particulier de son dernier système chenal-levée: le chenal du Danube. L'étude a été réalisée dans le cadre du projet de coopération franco-roumaine BlaSON, à partir des données sismiques, bathymétriques-acoustiques et sédimentologiques acquises en 1998 lors d'une campagne en mer Noire réalisée par IFREMER et GeoEcoMar. Des données sismiques et acoustiques antérieures ont été également utilisées. L'éventail profond du Danube s'enserre dans la catégorie des grands éventails vaseux. Comme les autres systèmes de ce genre (tel que les éventails de l'Amazone, du Mississippi ou de l'Indus) il est constitué d'une succession de systèmes chenaux-levées intercalés avec des dépôts de transport en masse. Le fonctionnement de l'éventail était conditionné par la baisse du niveau marin lors des périodes glaciaires. Ses faciès sismiques et sédimentaires s'apparentent aux faciès qui caractérisent la plupart des éventails de ce type. L'éventail du Danube constitue néanmoins un cas particulier parmi les autres systèmes étudiés, du fait de son fonctionnement dans un bassin lacustre. Ceci est dû à la situation spécifique de la mer Noire dont la connexion avec la Méditerranée, par le détroit de Bosphore et la mer de Marmara, a été successivement interrompue (au cours de périodes de bas niveau) et reprise (quand le niveau marin remontait en dépassant le seuil du Bosphore). L'absence de l'apport d'eau salée pendant les périodes glaciaires, associée avec l'augmentation de l'apport fluvial, ont déterminé l'installation d'un milieu d'eau douce dans la mer Noire à chaque fois que la baisse du niveau permettait la reprise du fonctionnement de l'éventail profond. Cette situation particulière aurait favorisé la formation des courants hyperpycnaux à l'embouchure d'un fleuve du débit du Danube qui déversait ses eaux turbides dans un bassin lacustre, et aurait donc influencé l'apparition de courants de turbidité dans l'éventail profond. Le chenal du Danube s'est développé sur la pente continentale en prolongation du canyon du Danube (ou Viteaz) auquel il est directement connecté. Le canyon est incisé de manière significative (26 km) dans la plate-forme continentale. Au cours de bas-niveaux marins il constituait la principale voie de transfert des sédiments terrigènes vers le bassin profond dans cette partie de la marge. Le canyon est constitué par une entaille avec des flancs abrupts et un talweg axial incisé, qui montre l'importance du processus d'érosion du fond pour le développement du canyon. Les segments qui ont été identifiés le long du canyon, avec des morphologies, des orientations et des pentes spécifiques, sont interprétés comme des phases d'avancement du canyon vers la côte. Plusieurs incisions sont visibles dans la structure interne du canyon et témoignent que la morphologie actuelle du canyon est le résultat de son évolution polyphasée. L'instabilité de la zone du canyon est en relation avec les apports sédimentaires importants à l'embouchure du Danube, avec la présence du gaz dans les sédiments superficiels, et possiblement sous un contrôle structural. Sur la pente supérieure (entre le canyon du Danube et environ 1400 m de profondeur) le chenal du Danube présente des levées bien développées et fortement asymétriques, avec la levée droite plus haute et plus large que la levée gauche. Ce type d'asymétrie, fréquemment décrit dans les éventails profonds est généralement attribué à l'effet Coriolis (Menard, 1955). Le chenal est légèrement sinueux, partiellement comblé et incisé par un talweg axial qui représente la continuation sur la pente du talweg incisé dans le canyon du Danube. L'analyse sismique détaillée du remplissage de la vallée montre plusieurs phases de dépôt, séparées par des discontinuités érosives. Ces surfaces d'érosion correspondent à des terrasses emboîtées, relativement parallèles le long de la vallée, visibles dans la bathymétrie. Les dépôts qui constituent le remplissage du chenal présentent un faciès sismique de type HAR (High Amplitude Reflections) dans l'axe du chenal, partiellement (ou parfois totalement) enlevé par les phases d'érosion subséquentes, qui continue latéralement avec des réflexions litées correspondant à un faciès sédimentaire de levée. Le remplissage de la vallée a été donc associé avec des écoulements dans le chenal, et non pas avec l'interruption de son fonctionnement. Sur la pente inférieure, le chenal unique bifurque plusieurs fois par avulsion et forme de nouveaux systèmes chenaux-levées méandriformes. Ces systèmes se succèdent verticalement en onlap, ce qui montre qu'un seul chenal a été actif à la fois. Chaque phase d'avulsion a eu comme résultat la mise en place d'une unité constituée par un lobe défini comme "High Amplitude Reflection Packets" (HARP, Flood et al., 1991) à la base, et un système chenal-levée au sommet. Le dépôt d'un lobe HARP est associé avec de l'érosion dans le chenal en amont du point d'avulsion pour l'ajustement de son profil après la rupture de la levée. Quand le chenal a retrouvé son profil d'équilibre, l'érosion a cessé et des levées ont commencé à se développer au-dessus des HARPs (Pirmez et al., 1997). Toutes les phases d'avulsion se sont développées d'après le même modèle: (1) la rupture de la levée gauche, plus étroite; (2) le dépôt d'un lobe HARP par les écoulements non-chenalisés en aval du point d'avulsion, et l'abandon de l'ancien chenal; (3) l'initiation d'un nouveau système chenal-levée. La migration systématique du chenal vers le nord est influencée par l'assymétrie des levées (donc par la force de Coriolis), et confinée entre les grandes levées de la phase initiale du chenal du Danube, au sud, et le relief abrupt de l'éventail du Dniepr au nord. La structure sédimentaire du chenal du Danube indique que les surfaces érosives à l'intérieur du remplissage du chenal se seraient formées en réponse aux avulsions, du fait de l'ajustement du profil du chenal après la rupture d'une levée. Les sédiments du chenal érodés au cours de ce processus ont formé les lobes HARP. Quand le chenal a retrouvé son profil d'équilibre, un système chenal-levée s'est développé en aval du point d'avulsion au dessus du lobe HARP, mais aussi en amont de ce point, où il se trouve confiné dans la vallée érosive. Les incisions fluviatiles identifiés sur la plate-forme continentale et la position de la ligne de côte pendant la dernière période d'activité du chenal du Danube montrent que le paléo-Danube se dirigeait directement vers la tête du canyon du Danube. Son embouchure était située à proximité du canyon, qui alimentait le chenal du Danube. Cependant, les courants hyperpycnaux devaient prévaloir dans le milieu de salinité réduite qui caractérisait la mer Noire lors des périodes actives de l'éventail. Ces conditions auraient favorisé la mise en place d'un système quasi-continu fleuve-canyon-éventail profond, qui contrôlait le transfert des sédiments entre la côte et le bassin profond.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2002/these-1206.pdf
http://archimer.ifremer.fr/doc/00000/1206/

Éditeur(s) : HAL CCSD
Résumé : International audience
After the 2009 Morakot typhoon, which triggered numerous large landslides in Taiwan, Mouyen et al. (2013)showed for the first time the potential of time-lapse gravity survey to infer the mass of sediments transferringby landsliding or through rivers. By providing an integrated measurement of masses, gravimetry might thus becomplementary to common methods used to assess the sediments discharge of rivers. But the masses of rocksdisplaced by Morakot were exceptionally large as a result of the record-breaking rainfalls brought by this typhoonand one might wonder to what extent time-lapse gravimetry could record such sediment transfers. In order tobetter assess the capabilities of this method, we set a time-lapse gravity network dedicated to the monitoring ofsuch sediments transfers in Paolai village (south-central Taiwan). Paolai is located near the large Laonong riverwhere temporary alluvial deposits of sediments exist and face steep mountain slopes likely to experience landslides.Both features are considered as potential source of mass transfers, and in turn of temporal gravity changes. Thefirst base gravity measurements were done in November 2015, using absolute and relative gravimeters, and will berepeated every year, before and after the typhoon season. In the same time, we also use a terrestrial lidar to scan thegeometry of both the river and the mountain slopes, hence providing a detailed topographical survey of the studiedarea. Adding Lidar measurements is an efficient strategy to solve for the non-uniqueness of gravity solutions.Meanwhile, we use the Eros morphodynamic model, that combine landsliding and flooding models, to investigatevarious scenarios of landsliding and subsequent sediment transport and compute the gravity changes on a virtualnetwork of gravimeters. This gives us insights on the expected order of magnitudes for these surface sedimenttransfers, which are useful to unravel the induced gravity signal from others sources such as local hydrology orvertical ground displacements. The modeling results also enable us to set network location that are best defined todetect mass changes associated with sediment transfer. The main objective of this study is to test whether timelapsegravity brings a new and reliable information compared to present methods monitoring sediments transfersand landscape evolution.
European Geosciences Union General Assembly 2016
Vienne, Austria

insu-01308554
https://hal-insu.archives-ouvertes.fr/insu-01308554

Éditeur(s) : Elsevier
Résumé : Foraminifera and ostracods have been quantitatively studied in core MD01-2472, from the upper continental slope (at water depth of 501 m), to evaluate their relationship with bottom water condition variability and decipher the control of the Levantine Intermediate Water (LIW) current on benthic faunas. The occurrence of reworked ostracod species (originating from the continental shelf) and, the presence of shallow water Elphidium/Ammonia benthic foraminifera are used to estimate the degree of along-slope transport at the core site. This has revealed two intervals of along-slope transport also associated with coarse-grained contourite deposits, deposited during the YD and HS2 episodes. Planktonic-benthic foraminiferal and ostracod assemblages reflect climate oscillations. Peaks of the polar planktonic Neogloboquadrina pachyderma (left-coiling S) may be used to identify Heinrich Events. Interstadials are marked by abundant ostracod species such as Paracypris sp., Argilloecia acuminata, and Cytheropteron alatum and the presence of benthic foraminifera like Bulimina marginata, Bulimina costata and Gyroidina altiformis. The B–A and Holocene are characterized by abundant warm water species of planktonic foraminifera and by the ostracod species Polycope sp. We hypothesize that there is relationship between LIW intensification during cold rapid climate events and benthic fauna assemblage variations due to changes in: 1) bottom water ventilation; and 2) the export of nutrients and/or sediment particles by bottom currents.
Quaternary International (1040-6182) (Elsevier), 2015-01 , Vol. 357 , P. 295-313

Droits : 2014 Elsevier Ltd and INQUA. All rights reserved.
http://archimer.ifremer.fr/doc/00245/35648/34208.pdf
DOI:10.1016/j.quaint.2014.11.038
http://archimer.ifremer.fr/doc/00245/35648/

Éditeur(s) : Elsevier
Résumé : Emplacement of post-glacial turbidites is commonly controlled by rapid changes in sea level or by seismicity. On the continental rise of the Gulf of Lions (Western Mediterranean), an aseismic area, we identified turbiditic beds deposited during the rising stage and highstand of sea level. Swath bathymetry, sediment cores, in situ Cone Penetrating Tests (CPTU), heavy mineral associations and radiocarbon dating determined the source, composition, distribution and age of the turbiditic beds. Turbidites are composed of homogeneous to positively graded silts to medium sand with quartz (up to 90%), shell debris and shelfal benthic faunas. Their distribution on the sea floor is very patchy and controlled by abundant inherited erosional bedforms. Their source is found in relict regressive sands at the outershelf. Their deposition occurred just after the onset of the post-glacial sea level rise and the concomitant sediment starvation of the Rhone deep sea turbiditic system until recently. Whilst canyons are fed with sand by strong seasonal hydro-sedimentary dynamics on the outershelf, the emplacement of post-glacial turbidites is not controlled by sea level changes but probably by the periodic flushing of the canyons. Our study revealed that this low energy aseismic margin undergoes significant transport of sand, down to the base of slope, during the sea-level rise and the Holocene highstand.
Marine Geology (0025-3227) (Elsevier), 2009-02 , Vol. 257 , N. 1-4 , P. 65-86

Droits : 2009 Published by Elsevier Ltd.
http://archimer.ifremer.fr/doc/2009/publication-6316.pdf
DOI:10.1016/j.margeo.2008.10.013
http://archimer.ifremer.fr/doc/00000/6316/

Éditeur(s) : Elsevier
Résumé : The fining upward trend commonly described on levees of turbidite systems can be either attributed to changes in the sediment supply (external forcing = allocyclic) or changes in the spillover processes related to the growth of the levee (internal forcing = autocyclic). However the real causes remain speculative and difficult to demonstrate. Knowledge of vertical change in flow velocity (or grain size) in turbidity currents, of the turbidity current's height, as well as the growth rate of a levee are theoretically sufficient to describe the evolution of the grain size of a leveed turbidite sequence deposited by spillover processes. A piston core (MD99-2344) retrieved on the right levee of the Petit-Rhone neofan, sampled an 8.50 m long turbidite sequence containing more than one hundred turbidite beds and showing a marked fining upward trend. With the help of two profiles describing respectively the vertical velocity [Stacey, M. and Bowen, A.J., 1988b. The vertical structure of turbidity currents and a necessary condition for self-maintenance, Journal of Geophysical Research, pp. 3543-3553.] and the vertical grain size [Migeon, S., 2000. Dunes geantes et levees sedimentaires en domaine marin profond: approche morphologique, sismique et sedimentologique. PhD Thesis, Universite Bordeaux 1, Talence, France, 288 pp.] of a turbidity current, and a simple graphical method, we test several hypotheses on the height of the turbidity current and on the grain size at the bottom of the turbidity current and we attempt to reproduce the vertical fining upward trend. Our results show that the fining upward trend of the turbidite facies can be explained by the aggradation of the turbidite levee and the gradual confinement of the turbidity currents in the channel. This is, therefore, an autocyclical phenomenon. However a high frequency variability of the grain size overprinted on the trend cannot be explained by internal forcing and is believed to be allocyclical, depending on changes to the sediment input. The vertical grain-size profile allows more realistic flow conditions to be determined and shows that the vertical velocity profile does not describe the ability of turbidity current to transport sediment. This simple graphical method allows a better understanding and quantification of the forcing on turbidite deposits and improves description of the characteristics of the turbidity currents from the grain size of the deposits.
Marine Geology (0025-3227) (Elsevier), 2006-12 , Vol. 234 , N. 1-4 , P. 191-213

Droits : 2006 Elsevier
http://archimer.ifremer.fr/doc/2006/publication-2311.pdf
DOI:10.1016/j.margeo.2006.09.019
http://archimer.ifremer.fr/doc/00000/2311/

Éditeur(s) : Communication, ICES Conference and Meeting (CM), 2010, Nantes
Résumé : Chlordecone is a very persistent insecticide used in banana plantations of the French West Indies between 1972 and 1993. Chlordecone residues were found in inland water, in agricultural and freshwater products, and in marine organisms. This pollution has become of great concern in 2007. Therefore, a governmental action Plan was launched to better assess the pollution and to improve the consumer’s protection. Within this plan, 1048 samples from 69 different species of marine fishes and crustaceans were collected all around both the Guadeloupe and the Martinique Islands and analyzed. The results confirm the presence of chlordecone in marine organisms, with highly variable concentrations (from the detection limit to 1000 μg.kg-1). In 17.9 % of the samples, concentrations exceeded 20 μg.kg-1, the maximum acceptable level in fish according to the French regulation (Anon, 2008). Two main features of this contamination were characterized. 1) Because of the sedimentation of contaminated suspended soil particles, the sheltered bays are more exposed to chlordecone than the open coast where terrigenous flux are dispersed. 2) Species biology, particularly their lifestyle and diet, appear to influence contamination levels. Thus, the more contaminated species live in relation with sediment or are at high trophic level. These results have directly supported political decisions in order to prevent too high exposure of consumers to chlordecone. Fishing activities in sheltered bays have been forbidden for potentially highly contaminated species like benthic crustaceans and top predators. Further studies are under way to assess the importance of the trophic transport of chlordecone within the foodweb, and to evaluate the historical deposition of this insecticide in sediment and its further bioavailability.

Droits : 2010 ICES/CIEM ; Ifremer
http://archimer.ifremer.fr/doc/00014/12511/9361.pdf
http://archimer.ifremer.fr/doc/00014/12511/

Éditeur(s) : HAL CCSD Elsevier
Résumé : Fire-history reconstructions inferred from sedimentary charcoal records are based on measuring sieved charcoal fragment area, estimating fragment volume, or counting fragments. Similar fire histories are reconstructed from these three approaches for boreal lake sediment cores, using locally defined thresholds. Here, we test the same approach for a montane Mediterranean lake in which taphonomical processes might differ from boreal lakes through fragmentation of charcoal particles. The Mediterranean charcoal series are characterized by highly variable charcoal accumulation rates. Results there indicate that the three proxies do not provide comparable fire histories. The differences are attributable to charcoal fragmentation. This could be linked to fire type (crown or surface fires) or taphonomical processes, including charcoal transportation in the catchment area or in the sediment. The lack of correlation between the concentration of charcoal and of mineral matter suggests that fragmentation is not linked to erosion. Reconstructions based on charcoal area are more robust and stable than those based on fragment counts. Area-based reconstructions should therefore be used instead of the particle-counting method when fragmentation may influence the fragment abundance.
ISSN: 0033-5894

hal-00903607
https://hal.archives-ouvertes.fr/hal-00903607
DOI : 10.1016/j.yqres.2013.01.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The paleostorm history of coastal lagoon environments (Pierre Blanche Lagoon, central part of the Gulf of Lions) has been established by integrating clay mineralogy and geochemical analysis. Clay mineralogy combined with bulk major and trace elements concentrations allow for the definition of four different end members: the Mosson drainage basin, the sandy barrier, the biogenic and the anthropic components. The two main sedimentary sources of the lagoonal system are the Mosson drainage basin which has a high concentration of smectite and Al2O3, and the sandy barrier characterized by high contents of illite, chlorite, SiO2 and Zr. Smectite/(illite + chlorite), SiO2/Al2O3 and Zr/Al2O3 ratios can be used to reconstruct the past storm history of the Pierre Blanche Lagoon. Our results indicate that the sensitivities of the clay mineralogy and geochemistry proxies are different. These sensitivities could be related: 1) first, to the comparison between different grain size for geochemistry and for clay mineralogy: 2) second, to the complexity of the mix (four end-members for the geochemistry and two end-members for the clay minerals): and 3) third, by the storm's ability to transport sediment of different sizes. (C) 2010 Elsevier B.V. All rights reserved.
ISSN: 0037-0738

hal-00512614
https://hal.archives-ouvertes.fr/hal-00512614
DOI : 10.1016/j.sedgeo.2010.04.012

Éditeur(s) : Elsevier
Résumé : The accumulation of nine heavy metals in fine-grained sediments from the mangrove fringed coast of French Guiana is evaluated. The dynamic features of the South American tropical coastline, from the Amazon to the Orinoco Rivers, result in mangrove sediments being alternately submitted to phases of erosion and net sedimentation a few tens of years long. This process influences the distribution of the heavy metals associated with these frequently re-mobilized deposits. Sedimentary cores and mangrove plant samples were collected, at different seasons, in various swamps characterized by different properties (content of sedimentary organic matter, distance from sea water and fresh water). The ranges of measured concentrations expressed in mu mol g(-1) were the following: Cu (0.06 to 0.61), Co (0.12 to 0.68), Pb (0.08 to 0.18), Ni (0.32 to 0.76), Cr (0.61 to 1.40), Zn (1.25 to 5.94), Mn (4.36 to 45.4) and Fe (441 to 1128). No differences were found between sediments from mangroves developing upstream and downstream of urban areas, i.e. Cayenne and Kourou. This suggests that the content of mangrove sediments in heavy metals along the coastline of French Guiana is essentially the result of the continuous alternation of accumulation and transport phases occurring upstream after departing from the Amazon watershed. The sources of this heavy metals content are thus difficult to identify. However it is well known that the alluvium produced by the natural erosion of the Amazonian soils is naturally enriched in mercury. Also, the run-off from gold mining activities is known to contribute to mercury pollution. Ranges in total Hg were between 0.15 and 2.57 nmol g(-1), with mean values close to 0.41 nmol g(-1), and were clearly correlated with total organic carbon except for some outstanding high values, which may be a result of rapid geochemical changes. Heavy metal concentrations showed variations with depth. The redox conditions and the decay processes affecting the organic matter control the cycling of iron and manganese, which in turn control the concentrations and associations of heavy metals. These preliminary results suggest that the variations in heavy metal content with depth or between mangrove areas result largely from diagenetic processes rather than changes in metal input resulting from local human activities. (c) 2005 Elsevier B.V. All rights reserved.
Marine Chemistry (0304-4203) (Elsevier), 2006 , Vol. 98 , N. 1 , P. 1-17

Droits : 2005 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2006/publication-1041.pdf
DOI:10.1016/j.marchem.2005.06.001
http://archimer.ifremer.fr/doc/00000/1041/

Éditeur(s) : Elsevier
Résumé : High-resolution sedimentological and micropaleontological studies of several deep-sea cores retrieved from the levees of the Celtic and Armorican turbidite systems (Bay of Biscay - North Atlantic Ocean) allow the detection of the major oscillations of the British-Irish Ice Sheet (BIIS) and 'Fleuve Manche' palaeoriver discharges over the last 30,000 years, which were mainly triggered by climate changes. Between 30 and 20 cal ka, the turbiditic activity on the Celtic-Annorican margin was weak, contrasting with previous stratigraphic models which predicted a substantial increase of sediment supply during low sea-level stands. This low turbidite deposit frequency was most likely the result of a weak activity of the 'Fleuve Manche' palaeoriver and/or of a reduced seaward transfer of sediments from the shelf to the margin. However, two episodes of turbiditic activity increase were detected in the Celtic-Armorican margin, during Heinrich events (HE) 3 and 2. This strengthening of the turbiditic activity was triggered by the meltwater releases from European ice sheets and glaciers favouring the seaward transfer of subglacial material, at least via 'Fleuve Manche' palaeoriver. At around 20 cal ka, a significant increase of turbidite deposit frequency occurred as a response to the onset of the last deglaciation. The retreat of the European ice sheets and glaciers induced a substantial increase of the 'Fleuve Manche' palaeoriver discharges and seaward transfer of continentally-derived material into the Armorican turbidite system. The intensification of the turbiditic activity on the Celtic system was directly sustained by the widespread transport of subglacial sediments from the British-Irish Ice Sheet (BIIS) to the Celtic Sea via the Irish Sea Basin. A sudden reduction of turbiditic activity in the Armorican system, between ca. 19 and 18.3 cal ka, could have been triggered by the first well known abrupt sea-level rise ('meltwater pulse', at around 19 cal ka) favouring the trapping of sediment in the 'Fleuve Manche' palaeoriver valleys and the decrease of the seaward transfer of continentally-derived material. The maximum of turbiditic activity strengthening in the Celtic-Armorican margin, between ca. 18.3 and 17 cal ka, was induced by the decay of European ice sheets and glaciers producing the most extreme episode of the 'Fleuve Manche' palaeoriver runoff and a great seaward transfer of subglacial material into the Bay of Biscay, Between ca. 17.5 and 16 cal ka, the turbiditic activity significantly decreased in both Celtic and Armorican turbidite systems in response to a global re-advance of glaciers and ice sheets in Europe. The last episode of ice sheet retreat, between ca. 16 and 14 cal ka, is well expressed in the Celtic system by a new increase of the turbiditic activity. The major episode of sea-level rise at around 14 cal ka ('Meltwater Pulse 1A'), precluding the seaward transfer of sediments, induced the end of turbiditic activity in both the Celtic and the Armorican system. Although two main phases of global sea-level rise seem to have had an effect on the Celtic-Armorican margin, this work proposes the BUS retreat and associated riverine discharges as the main trigger mechanisms of the turbiditic activity in this region during the last 30,000 years.
Marine Geology (0025-3227) (Elsevier), 2008 , Vol. 247 , N. 1-2 , P. 84-103

Droits : 2008 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2008/publication-3729.pdf
DOI:10.1016/j.margeo.2007.08.006
http://archimer.ifremer.fr/doc/00000/3729/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Recent sedimentary facies and processes along the offshore slope of east Taiwan are investigated using a large set of geophysical and sedimentological data. The Taiwan orogen is often considered as one of the most tectonically active regions in the world and also suffers important climatic activity with an average of four typhoons per year. We have mapped in details the morphosedimentary features and characterized the sedimentary facies along offshore eastern Taiwan. There, we show that the slope is driven by a variety of erosional processes from mass wasting to turbidity current. Mass movements such as slides or mass transport deposits (MTDs) are ubiquitous and affect the whole east coast off Taiwan. Detailed core investigations, such as grain size analysis, chemical and mineralogical composition, revealed that turbidite facies range from thin fine-grained turbidites to thick massive turbidite facies. The detailed analysis of turbidite beds allow us to discuss the controlling factors of turbidity current generation. Turbidity currents represent an important sedimentary process that governs the slope morphology off east Taiwan. Triggering mechanisms likely range from slope instabilities related to earthquakes shaking to failure relative to climatic-controlled pulses of sediment supply. We propose that at least two end-members are characteristics in our turbidite records in term of controlling factor:1) Turbidity currents likely generated by tectonic activity and earthquakes shaking in particular; and2) Turbidity currents likely generated by climatic activity such as typhoon-induced floods.
ISSN: 0025-3227

hal-01277768
https://hal.archives-ouvertes.fr/hal-01277768
DOI : 10.1016/j.margeo.2015.05.013

Éditeur(s) : HAL CCSD
Résumé : International audience
Extreme rainfall events can trigger numerous landslides in mountainous areas and a prolonged increase of river sediment load. The resulting mass transfer at the Earth surface in turn induces stress changes at depth, which could be sufficient to trigger shallow earthquakes. The 2009 Morakot typhoon represents a good case study as it delivered 3 m of precipitation in 3 days and caused some of the most intense erosion ever recorded. Analysis of seismicity time-series before and after the Morakot typhoon reveals a systematic increase of shallow (i.e. 0-15 km of depth) earthquake frequency in the vicinity of the areas displaying a high spatial density of landslides. This step-like increase in frequency lasts for at least 2-3 years and does not follow an Omori-type aftershock sequence. Rather, it is associated to a step change of the Gutenberg-Richter b-value of the earthquake catalog. Both changes occurred in mountainous areas of southwest Taiwan, where typhoon Morakot caused extensive landsliding. These spatial and temporal correlations strongly suggest a causal relationship between the Morakot-triggered landslides and the increase of earthquake frequency and their associated b-value. We propose that the progressive removal of landslide materials from the steep mountain landscape by river sediment transport acts as an approximately constant increase of the stress rate with respect to pre-typhoon conditions, and that this in turn causes a step-wise increase in earthquake frequency. To test this hypothesis, we investigate the response of a rate-and-state fault to stress changes using a 2-D continuum elasto-dynamic model. Consistent with the results of Ader et al. (2013), our preliminary results show a step-like increase of earthquake frequency in response to a step-like decrease of the fault normal stress. We also investigate the sensitivity of the amplitude and time-scale of the earthquake frequency increase to the amplitude of the normal stress change and to rheological parameters. Our study offers new insights on the potential influence of extreme erosional events on the short-time scale dynamics of faults and earthquakes.
American Geophysical Union Fall Meeting 2016
San Francisco, United States

insu-01416987
https://hal-insu.archives-ouvertes.fr/insu-01416987

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In oblique collision settings, parallel and perpendicular components of the relative plate motion can be partitioned into different structures of deformation and may be localized close to the plate boundary, or distributed on a wider region. In the Southern Alps of New Zealand, it has been proposed that one-third of the regional convergence is distributed in a broad area along the Southern Alps orogenic wedge. To better document and understand the regional dynamics of such systems, reliable markers of the horizontal tectonic motion over geological time scales are needed. River networks are able to record a large amount of distributed strain and they can thus be used to reconstruct the mode and rate of distribution away from major active structures. To explore the controls on river resilience to deformation, we develop an experimental model to investigate river pattern evolution over a doubly-vergent orogenic wedge growing in a context of oblique convergence. We use a rainfall system to activate erosion, sediment transport and river development on the model surface. At the end of the experiment, the drainage network is statistically rotated clockwise, confirming that rivers can record the distribution of motion along the wedge. Image analysis of channel time-space evolution shows how the fault-parallel and fault-perpendicular components of motion decrease toward the fault and impose rotation to the main trunk valleys. However, rivers do not record the whole imposed rotation rate, which suggest that the natural lateral channel dynamics can alter the capacity of rivers to act as passive markers of deformation.
ISSN: 0040-1951

hal-01467564
https://hal.archives-ouvertes.fr/hal-01467564
DOI : 10.1016/j.tecto.2016.04.016