Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The detailed morphology and internal structure of the Calabrian accretionary wedge and adjacent Eastern Sicily margin are imaged in unprecedented detail by a combined dataset of multi-beam bathymetry and high-resolution seismic profiles. The bathymetric data represent the results of 6 recent marine geophysical surveys since 2010 as well as a compilation of earlier surveys presented as a 2 arc-sec (60 m) grid. Several distinct morpho-tectonic provinces are identified including: the deeply incised Malta–Hyblean Escarpment, numerous submarine canyons, broad regions of relatively flat seafloor dominated by fields of sediment waves, the gently undulating anticlinal fold-and-thrust belts of the external Calabrian accretionary wedge and the adjacent portion of the Western Mediterranean Ridge. The Calabrian arc can be divided into 4 domains (from SE to NW): 1) the undeformed Ionian abyssal plain, 2) the external evaporitic wedge, 3) the internal clastic wedge, 4) the Calabrian backstop (Variscan crystalline basement). The Calabrian accretionary wedge can also be divided laterally into two major lobes, the NE- and the SW lobes, and two minor lobes. The kinematics of the limit between the two major lobes is investigated and shown to be sinistral in the external (evaporitic) wedge. A network of radial slip lines within the southernmost external wedge unequivocally demonstrate ongoing dextral displacement of a rigid indenter (representing the corner of the clastic wedge) into the evaporitic wedge thereby confirming the geodynamic model of an active lateral slab tear fault here off eastern Sicily. The slab tear produces a series of major sub-parallel dextral strike-slip faults offshore Mt. Etna and south of the Straits of Messina consistent with the relative motions between Calabria and the Peloritan domain (NE Sicily). Abundant strike-slip faulting, and wide-spread folding and thrusting observed throughout the entire accretionary wedge, indicate regional shortening between the Ionian abyssal plain (foreland) and the Calabrian–Peloritan backstop caused by active subduction.
ISSN: 0012-821X

hal-01523990
https://hal.archives-ouvertes.fr/hal-01523990
DOI : 10.1016/j.epsl.2016.12.020

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This article summarizes the geodynamic evolution of the Variscan to Mesozoic Tethyan subduction history, based on a review of geochronological data from Eastern Anatolia and the Lesser Caucasus, and new isotopic ages for the Georgian crystalline basements. The geological history of the basements of Georgia (Transcaucasus) and NE Turkey (eastern Pontides) appears to be similar and provides evidence for a continuously active continental margin above a north-dipping subduction since at least the Lower Jurassic. New La-ICPMS U-Pb ages from the Georgian basement provide further evidence for the derivation of the Transcaucasus and its western continuation (the eastern Pontides) from Gondwana. A migmatized granodiorite provides preserved magmatic zircon cores with an age of 474 ± 3 Ma, while the age of migmatization is constrained by its 343 ± 2 Ma metamorphic rims. Metamorphism is synchronous with widespread I-type granites that were emplaced at 335 ± 8 Ma in the neighbouring Dzirula massif, and in the eastern Pontides. These U-Pb ages are in close agreement with recently obtained Ar/Ar ages from biotites and muscovites from metamorphic schists and U-Pb ages ranging from 340 to 330 Ma in the Georgian basement. The narrow range of ages suggests that the Variscan LP-HT metamorphic event in the eastern Pontides and Georgia was of short duration and likely related to mantle-derived intrusives. Furthermore, we suggest that (1) rifting of the Pontides-Transcaucasus block (PTB) from Gondwana at 450–350 Ma could have been driven by roll-back of the south-dipping Rheic slab, (2) that the main metamorphic and coeval magmatic events are related to the accretion of the PTB to the Eurasian margin at c. 350 Ma, while the source of magmatism is ascribed to slab detachment of the south-dipping slab at 340 Ma and that (3) three subduction zones may have been contemporaneously active in the Tethyan domain during the Jurassic: (i) the Lesser Caucasus South Armenian Block (SAB) shares a similar Gondwana affinity, but bears younger ages for its MP-MT metamorphic evolution and calc-alkaline magmatism bracketed from 160 to 123 Ma; (ii) north-dipping subduction below the PTB from c. 210 Ma to 150 Ma; (iii) northward intra-oceanic subduction bracketed from 180 to 90 Ma between the SAB and the PTB.
ISSN: 0264-3707

hal-01347761
https://hal.archives-ouvertes.fr/hal-01347761
DOI : 10.1016/j.jog.2016.03.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We report concentrations of hydrogen (H) in upper mantle minerals of peridotites (olivine and pyroxenes) transported by alnöitic lavas, which erupted on the southwestern border of the Ontong Java Plateau (Malaita, Solomon Islands, West Pacific). Unpolarized FTIR analyses show that olivine, orthopyroxene, and diopside contain 2–32 ppm, 162–362 ppm and 159–459 ppm wt H2O, respectively. In the studied lherzolites, garnets are anhydrous. The concentration of hydrogen within individual olivine and pyroxene grains is almost homogeneous, indicating no evidence of dehydration or hydration by ionic diffusion. In the lherzolite, the concentration of hydrogen in olivine tends to increase weakly with depth (based on geothermobarometry), consistent with the increase of water solubility with increasing water fugacity as a function of pressure, but concentrations remain well below water-saturation values determined experimentally. The highest concentration of H in olivine (32 ppm wt H2O) is, however, found in refractory spinel harzburgites, which equilibrated at depths of 85 km., while deeper specimens as the high-temperature spinel harzburgites, and some of the garnet lherzolites, contain less hydrogen in olivine. Olivines from pyroxene- or pargasite-rich peridotites have also lower hydrogen concentrations. We interpret the high hydrogen concentrations in olivine from the refractory spinel harzburgites as due to (1) simultaneous hydration and metasomatism of the lithospheric mantle by a water-rich silicate melt/fluid, during which hydrogen follows MREE and where spinel harzburgite have experienced ‘stealth’ metasomatism, and/or (2) to a late ‘fleeting’ hydrogen metasomatism, which would hydrate the rock after this first ‘stealth’ metasomatism event. In the second case, the composition of the ‘fleeting’ percolating fluid (small volume fraction of very evolved fluids, with high volatiles concentration and transient properties) is likely to be linked to the decrease of the plume activity and resulting in the downwelling of the lithosphere asthenosphere boundary. The difference in hydrogen concentration between harzburgites and lherzolites could be linked to variation in trace elements in olivine induced by the first ‘stealth’ metasomatism alone or associated to the late ‘fleeting’ hydrogen metasomatism, triggered by the lack of secondary crystallization of clinopyroxenes in the harzburgite. To conclude, H concentrations in upper mantle minerals may thus be correlated to metasomatic events, with the later yielding variation of the mineral assemblage and trace element composition that constitute the peridotites.
ISSN: 0024-4937

hal-01143385
https://hal.archives-ouvertes.fr/hal-01143385
DOI : 10.1016/j.lithos.2014.11.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The subcontinental lithospheric mantle evolves through time due to tectonic events and processes as static recrystallization and melt percolation. To constrain the extent of these processes in the South Patagonian subcontinental mantle lithosphere we performed a microstructural and Electron Backscattered Diffraction (EBSD) study of a suite of 35 peridotite xenoliths brought to the surface by Plio-Pleistocene alkaline volcanic rocks from Gobernador Gregores and Pali Aike. All samples show a well-developed olivine and pyroxene crystallographic preferred orientation (CPO), consistent with deformation by dislocation creep with dominant activation of [100]{0kl} in olivine. The coarse granular or tabular textures and the low density of intracrystalline deformation features indicate that deformation was followed by annealing under static conditions. The xenoliths also show microstructural evidence of multiple episodes of reactive melt percolation. Neither annealing nor melt percolation erased the olivine CPO, which has [010]-fiber, [100]-fiber and orthorhombic patterns in Pali Aike xenoliths and essentially [010]-fiber and orthorhombic patterns in Gobernador Gregores xenoliths. Seismic properties calculated based on the CPO and modal compositions are, however, rather homogeneous, with fast S-wave polarization and P-wave propagation parallel to the [100] olivine axis. The variation in the olivine CPO solely changes the minimum S-wave birefringence direction, which is normal to the foliation for axial-[010] olivine CPO. Average samples for the two localities, obtained by adding up the individual samples CPO data in a common reference frame, show, however, a 'normal' upper mantle anisotropy with a maximum S-wave birrenfringence of ca. 5% at high angle to the both the maximum [010] and [100] axes concentrations, that is in the foliation, but normal to the lineation, and a minimum birefringence at low angle to the [100] maximum, that is parallel to the lineation.
ISSN: 0040-1951

hal-01053500
https://hal.archives-ouvertes.fr/hal-01053500
DOI : 10.1016/j.tecto.2014.02.017

Éditeur(s) : HAL CCSD
Résumé : International audience
Characterizing the hydraulic properties of heterogeneous and complex aquifers often requires field scale investigations at multiple space and time scales to better constrain hydraulic property estimates. Here, we present and discuss results from the site of Ploemeur (Brittany, France) where complementary hydrological and geophysical approaches have been combined to characterize the hydrogeological functioning of this highly fractured crystalline rock aquifer. In particular, we show how cross-borehole flowmeter tests, pumping tests and frequency domain analysis of groundwater levels allow quantifying the hydraulic properties of the aquifer at different scales. In complement, we used groundwater temperature as an excellent tracer for characterizing groundwater flow. At the site scale, measurements of ground surface deformation through long-base tiltmeters provide robust estimates of aquifer storage and allow identifying the active structures where groundwater pressure changes occur, including those acting during recharge process. Finally, a numerical model of the site that combines hydraulic data and groundwater ages confirms the geometry of this complex aquifer and the consistency of the different datasets. The Ploemeur site, which has been used for water supply at a rate of about 106 m3 per year since 1991, belongs to the French network of hydrogeological sites H+ and is currently used for monitoring groundwater changes and testing innovative field methods.
AGU Fall Meeting 2014
San Francisco, United States

insu-01088596
https://hal-insu.archives-ouvertes.fr/insu-01088596

Éditeur(s) : HAL CCSD Cambridge University Press (CUP)
Résumé : International audience
Upper Triassic volcanic and sedimentary rocks of the Mamonia Complex in southwestern Cyprus are exposed in erosional windows through the post-Cretaceous cover, where the Mamonia Complex is tectonically imbricated with the Troodos and Akamas ophiolitic suites. Most of these Upper Triassic volcanic rocks have been considered to represent remnants of Triassic oceanic crust and its associated seamounts. New Nd and Pb isotopic data show that the whole Mamonia volcanic suite exhibits features of oceanic island basalts (OIB). Four rock types have been distinguished on the basis of the petrology and chemistry of the rocks. Volcanism began with the eruption of depleted olivine tholeiites (Type 1) and oceanic island tholeiites (Type 2) associated with deep basin siliceous and/or calcareous sediments. The tholeiites were followed by highly phyric alkali basalts (Type 3) interbedded with pelagic Halobia-bearing limestones or white reefal limestones. Strongly LREE-enriched trachytes (Type 4) were emplaced during the final stage of volcanic activity. Nd and Pb isotopic ratios suggest that tholeiites and mildly alkali basalts derived from partial melting of heterogeneous enriched mantle sources. Fractional crystallization alone cannot account for the derivation of trachytes from alkaline basalts. The trachytes could have been derived from the partial melting at depth of mafic material which shares with the alkali basalts similar trace element and isotopic compositions. This is corroborated by the rather similar isotopic compositions of the alkali basalts and trachytes. The correlations observed between incompatible elements (Nb, Th) and {varepsilon}Nd and Pb isotopic initial ratios suggest that the Mamonia suite was derived from the mixing of a depleted mantle (DMM) and an enriched component of High µ (µ = 238U/204Pb, HIMU) type. Models using both Nd and Pb isotopic initial ratios suggest that the depleted tholeiites (Type 1) derived from a DMM source contaminated by an Enriched Mantle Type 2 component (EM2), and that the oceanic tholeiites (Type 2), alkali basalts (Type 3) and trachytes (Type 4) were derived from the mixing of the enriched mantle source of the depleted tholeiites with a HIMU component. None of the Mamonia volcanic rocks show evidence of crustal contamination. The Upper Triassic within-plate volcanism likely erupted in a small southerly Neotethyan basin, located north of the Eratosthenes seamount and likely floored by oceanic crust.
ISSN: 0016-7568

insu-00353657
https://hal-insu.archives-ouvertes.fr/insu-00353657
DOI : 10.1017/S0016756806002937

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : This paper presents the background for the calculation of physical properties of an aggregate from constituent crystal properties and the texture of the aggregate in a coherent manner. Emphasis is placed on the important tensor properties of 2nd and 4th rank with applications in rock deformation, structural geology, geodynamics and geophysics. We cover texture information that comes from pole figure diffraction and single orientation measurements (electron backscattered diffraction or EBSD, electron channelling pattern, Laue pattern, optical microscope universal-stage). In particular, we provide explicit formulae for the calculation of the averaged tensor from individual orientations or from an orientation distribution function (ODF). For the latter we consider numerical integration and an approach based on the expansion into spherical harmonics. This paper also serves as a reference paper for the mathematical tensor capabilities of the texture analysis software MTEX, which is a comprehensive, freely available MatLab toolbox that covers a wide range of problems in quantitative texture analysis, for example, ODF modelling, pole figure to ODF inversion, EBSD data analysis and grain detection. MTEX offers a programming interface which allows the processing of involved research problems as well as highly customizable visualization capabilities; MTEX is therefore ideal for presentations, publications and teaching demonstrations.
Deformation Mechanisms, Rheology and Tectonics: Microstructures, Mechanics and Anisotropy

hal-00688833
https://hal.archives-ouvertes.fr/hal-00688833

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Slices of polycyclic metasediments (marbles and meta-cherts) are tectonically amalgamated with the polydeformed basement of the Dent Blanche tectonic system along a major Alpine shear zone in the Western Alps (Becca di Salé area, Valtournenche Valley). A combination of techniques (structural analysis at various scales, metamorphic petrology, geochronology and trace element geochemistry) was applied to determine the age and composition of accessory phases (titanite, allanite and zircon) and their relation to major minerals. The results are used to reconstruct the polyphase structural and metamorphic histories, comprising both pre-Alpine and Alpine cycles. The pre-Alpine evolution is associated with low-pressure high-temperature metamorphism related to Permo-Triassic lithospheric thinning. In meta-cherts, microtextural relations indicate coeval growth of allanite and garnet during this stage, at ~ 300 Ma. Textures of zircon also indicate crystallisation at HT conditions; ages scatter from 263 to 294 Ma, with a major cluster of data at ~ 276 Ma. In impure marble, U-Pb analyses of titanite domains (with variable Al and F contents) yield apparent 206Pb/238U dates range from Permian to Jurassic. Chemical and isotopic data suggest that titanite formed at Permian times and was then affected by (extension-related?) fluid circulation during the Triassic and Jurassic, which redistributed major elements (Al and F) and partially opened the U-Pb system. The Alpine cycle lead to early blueschist facies assemblages, which were partly overprinted under greenschist facies conditions. The strong Alpine compressional overprint disrupted the pre-Alpine structural imprint and/or reactivated earlier structures. The pre-Alpine metamorphic record, preserved in these slices of metasediments, reflects the onset of the Permo-Triassic lithospheric extension to Jurassic rifting.
ISSN: 0024-4937

hal-00758123
https://hal.archives-ouvertes.fr/hal-00758123
DOI : 10.1016/j.lithos.2012.05.007

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
Although they are famous among Earth scientists, the Lherz peridotites are exposed within geological formations of the North Pyrenean Zone (NPZ) still lacking detailed investigations. Our study focuses on the metasediments of the Aulus basin hosting the Lherz peridotite body and associated ultramafic fragments of smaller size. The new data set comprises of structural analysis and detailed geological mapping of the massive Mesozoic marbles that form the prerift sequence typical of the NPZ and of the ultramafic-rich clastic breccia formations surrounding the peridotite bodies. The massive marbles display an evolution from hot and ductile to cold and brittle deformation, indicative of an exhumation process ending with the sedimentary reworking of both the deformed Mesozoic metasediments and the exhumed ultramafic rocks. Crystal Preferred Orientations (CPO) measured in the marbles support a deformation mechanism by dislocation creep of calcite, which is dominant between 400 8C and 600 8C; these deformation temperatures are within the range determined earlier by Clerc et al. (2015), using RSCM (Raman Spectroscopy of Carbonaceous Material) geothermometry. As a consequence, we better describe the transition from ductile to brittle deformation in the prerift marbles and clarify the origin of the syn-rift breccias. Due to continuous exhumation along detachments' faults, the brecciated metamorphic carbonates of the prerift NPZ sedimentary cover were passively uplifted towards shallower levels and progressively unroofed, while transported passively on the back of the exhumed ultramafic footwall. These results are consistent with the recent interpretations of the North Pyrenean peridotites as remnants of subcontinental mantle rocks exhumed within the pre-Pyrenean rift system. We emphasize the importance of tectonic decoupling between the Mesozoic sedimentary cover and the Palaeozoic basement, which leads to the juxtaposition of metamorphosed and deformed Mesozoic Please cite this article in press as: Lagabrielle Y, et al. Very high geothermal gradient during mantle exhumation recorded in mylonitic marbles and carbonate breccias from a Mesozoic Pyrenean palaeomargin (Lherz area, North Pyrenean Zone, France). C. R. Geoscience (2016), http://dx.
ISSN: 1631-0713

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01285079
https://hal-insu.archives-ouvertes.fr/insu-01285079
https://hal-insu.archives-ouvertes.fr/insu-01285079/document
https://hal-insu.archives-ouvertes.fr/insu-01285079/file/1-s2.0-S1631071315002060-main.pdf
DOI : 10.1016/j.crte.2015.11.004

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
To improve a previously constructed broadly neutralizing hepatitis B virus (HBV)-specific preS1 humanized antibody (HzKR127), we further humanized it through specificitydetermining residue (SDR) grafting. Moreover, we improved affinity by mutating two residues in heavy-chain complementarity-determining regions (CDR), on the basis of the crystal structure of the antigen–antibody complex. HzKR127-3.2 exhibited 2.5-fold higher affinity and enhanced virus-neutralizing activity compared to the original KR127 antibody and showed less immunogenic potential than HzKR127. Enhanced virus-neutralizing activity was achieved by the increased association rate, providing insights into engineering potent antibody therapeutics for HBV immunoprophylaxis. HzKR127-3.2 may be a good candidate for HBV immunoprophylaxis.
ISSN: 1873-3468

hal-01110668
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01110668
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01110668/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01110668/file/Enhanced%20humanization_accepted.pdf
DOI : 10.1016/j.febslet.2014.11.046

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Melting phase relations of model carbonated peridotite in the system CaO-MgO-Al2O3-SiO2-CO2 from 2 to 3 GPa are reported. Experimentally produced melts, which are model carbonatites, with approximately 36-40 wt % CaO, 12-17 wt % MgO, 0.2-1.5 wt % Al2O3, 1-4 wt % SiO2, and 40-42 wt % CO2 (carbon dioxide) are present at all pressures investigated. At 2.8 and 3 GPa, carbonatitic melts are seen experimentally at temperatures that are very close to the vapor-free (CO2) peridotite solidus and are found in equilibrium with forsterite, orthopyroxene, clinopyroxene, and garnet. Solidus phase relations with isobaric and pressure-temperature invariant points, defining the so-called carbonated peridotite solidus ledge, are also reported from 2.1 to 3 GPa. A divariant region exists from 2 to 2.6 GPa wherein two, compositionally different melts are present. In this region, these two melts, carbonatitic and silicate in composition, coexist with crystalline phase assemblage and free vapor. The silicate liquid has approximately 30-48 wt % SiO2 and approximately 6 to 20 wt % of dissolved CO2. The presence of carbonatitic and silicate liquids is interpreted to be due to liquid immiscibility. On the basis of melting phase relations reported here, we conclude that (a) the ledge is a feature along which model carbonatitic liquids are produced by reaction of silicates and CO2 vapor and (b) alkali-free carbonatites and silicate melts can form through melt unmixing at depths of ~60-80 km in the Earth's mantle.
ISSN: 0148-0227

hal-01053913
https://hal.archives-ouvertes.fr/hal-01053913
DOI : 10.1002/2013JB010913

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
High 3He/4He ratios in some basalts have generally been interpreted as originating in an incompletely degassed lower-mantle source1, 2, 3, 4, 5, 6, 7, 8, 9. This helium source may have been isolated at the core-mantle boundary region since Earth's accretion4, 5, 6. Alternatively, it may have taken part in whole-mantle convection and crust production over the age of the Earth7, 8, 9; if so, it is now either a primitive refugium at the core-mantle boundary8 or is distributed throughout the lower mantle7, 9. Here we constrain the problem using lavas from Baffin Island, West Greenland, the Ontong Java Plateau, Isla Gorgona and Fernandina (Galapagos). Olivine phenocryst compositions show that these lavas originated from a peridotite source that was about 20 per cent higher in nickel content than in the modern mid-ocean-ridge basalt source. Where data are available, these lavas also have high 3He/4He. We propose that a less-degassed nickel-rich source formed by core-mantle interaction during the crystallization of a melt-rich layer or basal magma ocean5, 6, and that this source continues to be sampled by mantle plumes. The spatial distribution of this source may be constrained by nickel partitioning experiments at the pressures of the core-mantle boundary.
ISSN: 0028-0836

hal-00941025
https://hal.archives-ouvertes.fr/hal-00941025
DOI : 10.1038/nature11771

Éditeur(s) : HAL CCSD Elsevier
Résumé : In situ analysis of major elements, platinum-group elements and Os isotope composition data for 170 grains of Ru–Os–Ir alloys from podiform chromitites in the Luobusa and Dongqiao ophiolites, Tibet, provide new constraints on the sources of the alloy grains, the Os-isotope composition of the Neo-Tethyan oceanic upper mantle, and the timing of melt–rock reactions in the ultramafic peridotites of the host ophiolites. Most alloy grains are osmiridium and iridosmine. Based on elemental and isotopic compositions, two populations can be identified. Group I, found in both ophiolite bodies, has fractionated PGE patterns typical of alloys and homogeneous 187Os/188Os 0.12645 ± 4 (2s; n = 145). Group II alloys from the Dongqiao ophiolites show smooth PGE patterns and 187Os/188Os ranges from 0.12003 to 0.12194 (yielding Re-depletion ages ≥ 1.1 Ga). Both the PGE patterns and the Os isotopic compositions of Group II resemble those of sulfides residual after melting. Group I alloys represent an early cumulate phase during the crystallization of magmas and are interpreted as derived from an asthenospheric melt. In contrast, Group II alloys are inferred to derive from the breakdown of residual sulfides from the mantle section of the ophiolite, which may represent relics of a sub-continental lithospheric mantle. The coexistence of the two groups of alloys in Dongqiao samples reflects interaction between asthenosphere-derived melts and old depleted lithospheric mantle and suggests that the chromitites originated through melt–rock reactions. The data on the Group I alloys support the hypothesis that the Re–Os evolution of the convective oceanic mantle resembles that of enstatite chondrites.
ISSN: 0012-821X

hal-00404967
https://hal.archives-ouvertes.fr/hal-00404967
DOI : 10.1016/j.epsl.2007.05.044

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
At oceanic spreading centers, interactions between magma and hydrothermal convecting systems trigger major physical, thermal, and chemical exchanges. The two-pyroxene hornfels recovered from the base of the sheeted dike sequence at Integrated Ocean Drilling Program (IODP) Site 1256 (equatorial Eastern Pacific) are interpreted as a conducting boundary layer between the underlying axial melt lens and the hydrothermally cooled sheeted dikes. They are cut by numerous small, felsic veins, which were recently interpreted as a product of hydrous partial melting of sheeted dikes. Here, we present trace element compositions of products (melts and residues) of hydrous partial melting experiments using basalts and hornfels from IODP Site 1256 as starting material. The experimental products generated between 910 °C and 970 °C match the natural lithologies from Site 1256 in terms of major and trace element compositions. The compositions of the anatectic melts correspond to the compositions of the felsic veins, while the residual minerals match the compositions of the two-pyroxene hornfels, evidencing that hydrous partial melting is an important magmatic process in the gabbro/dike transition of fast-spreading mid-oceanic ridges. Our results complement previous experimental studies on anatectic processes occurring at the roof of the magma chambers from fast-spreading mid-ocean ridges. Moreover, calculations of mixing and assimilation fractional crystallization using the experimental partial melts as contaminant/assimilant showed that anatectic melts can only be a minor contributor to the contamination process.
ISSN: 0024-4937

hal-01419949
https://hal.archives-ouvertes.fr/hal-01419949
DOI : 10.1016/j.lithos.2016.05.001