Éditeur(s) : HAL CCSD
Résumé : East African Rift (EAR) is the divergent plate boundary. EAR exposes different stages of extension, from early stage rifting in Tanzania to oceanic accretion in Afar (Ethiopia). Manyara basin is the southernmost rift system of the east branch of EAR with recent volcanism (< 1.5 Ma) and a seismic swarm in the lower crust (20 – 40 km). Due to its location and tectonic setting, the Manyara basin offers the opportunity to study the earliest stage of rift initiation. Manyara volcanism is composed of several types of hyper-alkaline lavas as Mg-nephelinites (Mg# > 55) (Labait, Kwaraha), calciocarbonatite (Kwaraha) and evolved nephelinites (Mg# < 35) (Hanang).Mg-nephelinites (Labait and Kwaraha) are primary lavas mainly composed of olivine and clinopyroxene (cpx). Geochemical modelling from trace elements suggests that these primary magmas result from a degree of partial melting < 1 % from a CO2-garnet-phlogopite-bearing peridotite. These magmas have an asthenospheric source at depth > 120 km (lava carries xenoliths with equilibrium conditions > 4 GPa). The minerals were crystallized from a magma with a low H2O content (0.1 and 0.5 wt% H2O). The calciocarbonatite and evolved nephelinites are derived from Mg-nephelinites by fractional crystallization and immiscibility processes. Hanang nephelinites are silica- and alkaline-rich lavas (44.2 – 46.7 wt % SiO2, 9.5 –12.1 wt % Na2O+K2O, respectively) composed by cpx, Ti-garnet, nepheline, apatite and titanite. Complex zonation of cpx (e.g. abrupt change of Mg#, Nb/Ta, and H2O) and trace element patterns of nephelinites record magmatic differentiation involving open system with carbonate-silicate immiscibility and primary melt replenishment. The low H2O content of cpx (3 – 25 ppm wt. H2O) indicates that at least 0.3 wt % H2O was present at depth during carbonate-rich nephelinite crystallization at 340 – 640 MPa and 1050 – 1100 °C. The study of hosted-nepheline melt inclusions from Hanang allows constraining the late magmatic evolution of nephelinites during storage and magma ascent. Melt inclusions are composed by a silicate trachytic glass, a carbonate phase and a shrinkage bubble. Trachytic glass contains high content in CO2 (0.43 wt %, SIMS analyses), sulfur (0.21 – 0.92 wt % S), chlorine (0.28 –0.84 wt % Cl) and H2O low content (< 0.1 wt %, Raman analyses). Immiscibility process leading to the formation of carbonate occurs in a closed system during rapid magma ascent between 200 – 500 MPa. The carbonate phase is a Ca-Na-K-S-rich and anhydrous carbonate (33 wt % CaO, 20 wt % Na2O, 3 wt % K2O, and 3 wt % S). The pre-immiscible liquid has a phonolitic composition with 6 ± 1.5 wt % CO2 at 700 MPa. A preliminary study of melt inclusions by XANES spectroscopy and whole rocks by Mössbauer spectroscopy was used to determine these Manyara lavas were formed at oxidizing conditions (~ ΔFMQ +1.5).The early stage rifting volcanism (Manyara Basin) is characterized by CO2-rich and H2O-poor magmas from at least 120 km below the rift escarpment. The presence of CO2-rich magmas and the small amount of volcanic rocks erupted at the surface may indicate that the storage and percolation of these magmas at depth is a potential trigger for deep seismic swarms.
Le rift Est africain (REA) est une frontière de plaque en extension. Ce rift présente plusieurs stades d’extension, de l’initiation du rift en Tanzanie jusqu’à l’accrétion océanique en Afar. Le bassin de Manyara se situe le plus au sud de branche Est du REA. Il est caractérisé par la présence de volcanisme récent (< 1,5 Ma) et d’un essaim sismique dans la croûte inférieure (20 – 40 km). De par sa localisation et son contexte tectonique, le bassin de Manyara offre l’opportunité d’étudier le stade le plus précoce de l’initiation du rift. Le bassin de Manyara est composé de plusieurs types de laves hyperalcalines, les néphélinites magnésiennes (Mg# > 55) (Labait, Kwaraha), de calciocarbonatite (Kwaraha) et des néphélinites différenciées (Mg# < 35) (Hanang).Les néphélinites magnésiennes (Labait et Kwaraha) sont des laves primaires composées d’olivines et de clinopyroxènes (cpx). La modélisation géochimique des éléments en trace suggère que ces magmas primaires résultent d'un degré de fusion partielle ≤ 1 % à partir d'une péridotite à grenat et phlogopite. Ces magmas proviennent d’une profondeur > 120 km (présence de xénolites avec des conditions d’équilibre > 4 GPa). Les minéraux ont cristallisés à partir d’un magma pauvre en eau (0,1 et 0,5 pds % H2O). La calciocarbonatite et les néphélinites différenciés sont issues des néphélinites magnésiennes par cristallisation fractionnée et processus d’immiscibilité. Les néphélinites du Hanang sont riches en éléments alcalins (9,5 – 12,1 pds % Na2O+K2O) et en silice (44,2 – 46,7 pds% SiO2) et sont composés de cpx, grenat, néphéline, titanite et apatite. La zonation complexe dans les cpx (par exemple, changement brusque de Mg#, Nb/Ta, et H2O) implique une différenciation magmatique en système ouvert avec immiscibilité de liquide carbonaté et silicaté ainsi qu’un remplissage de la chambre magmatique avec des liquides primaires. La faible teneur en eau des cpx (3 – 25 ppm H2O) indique la présence d’un magma pauvre en eau (0,3 pds % H2O) lors de la cristallisation des cpx à des conditions crustales (340 – 640 MPa et 1050 – 1100 °C). L’étude des inclusions vitreuses dans les néphélines de Hanang permet de contraindre l'évolution magmatique tardive des néphélinites et le comportement des éléments volatils (CO2, H2O, S, F, Cl) lors du stockage et de la remontée du magma. Les inclusions vitreuses sont composées d’un verre trachytique, d’une phase carbonatée et d’une bulle de rétraction. Le verre trachytique contient du CO2 (0,43 pds % CO2, analyses SIMS), du soufre (0,21 à 0,92 pds% S), du chlore (0,28 – 0,84 pds % Cl) et très peu d’H2O (< 0,1 pds % H2O, analyses Raman). Le processus d’immiscibilité conduisant à la formation du carbonate se produit dans un système fermé pendant l'ascension rapide du magma, entre 200 – 500 MPa. La phase carbonatée est un carbonate anhydre et riche en Ca-Na-K-S (33 pds % CaO, 20 pds % Na2O, 3 pds % K2O, et 3 pds % S). Le liquide pré-immiscible a une composition phonolitique avec 6 ± 1,5 pds % CO2 à une pression de 700 MPa. Une étude préliminaire des inclusions par spectroscopie XANES et des roches par spectroscopie Mössbauer a permis de déterminer que les laves de Manyara se sont formées à conditions oxydantes (~ ∆FMQ +1,5).À l’initiation du rift, le volcanisme dans le bassin de Manyara est caractérisé par des magmas riches en CO2 et pauvres en H2O issus d’au moins 120 km de profondeur sous l'escarpement du rift. La présence de ces magmas riches en CO2 et la faible quantité de roches volcaniques émises à la surface peuvent indiquer que le piégeage et la percolation de ces magmas en profondeur est un déclencheur potentiel des essaims sismiques profonds.
https://tel.archives-ouvertes.fr/tel-01563231

NNT : 2016MONTT114
tel-01563231
https://tel.archives-ouvertes.fr/tel-01563231
https://tel.archives-ouvertes.fr/tel-01563231v2/document
https://tel.archives-ouvertes.fr/tel-01563231/file/2016_BAUDOUIN_archivage.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Phase equilibrium data pertaining to melting of simplified carbonated peridotite in the systems CaO-MgO-SiO2-CO2 and CaO-MgO-Al2O3-SiO2-CO2 at pressures of 10-26 GPa, corresponding to similar to 300-750 km depths in the Earth, are presented. In both the studied systems, liquid compositions, with changing crystalline phase assemblage, are carbonatitic throughout the studied pressure range. In the system CMS-CO2, melting phase relations are isobarically invariant; liquid is in equilibrium with forsterite + clinoenstatite + clinopyroxene + magnesite, forsterite + majorite + clinopyroxene + magnesite, wadsleyite + majorite + clinopyroxene + magnesite, ringwoodite + majorite + calcium-silicate perovskite + magnesite, magnesium-silicate perovskite + periclase + calcium-silicate perovskite + magnesite at 12, 14, 16, 20, and 26 GPa, respectively. In the system CMAS-CO2, a phase assemblage consisting of forsterite + orthopyroxene + clinopyroxene + magnesite + garnet + melt from 10 to 14 GPa is isobarically invariant. However, owing to the disappearance of orthopyroxene at pressures greater than 14 GPa, from 16 and up to at least 26 GPa, the solidus of simplified carbonated peridotite spans a divariant surface in pressure-temperature space. The liquid coexists with wadsleyite + clinopyroxene + garnet + magnesite, ringwoodite + calcium-silicate perovskite + garnet + magnesite, and magnesium-silicate perovskite + periclase + calcium-silicate perovskite + magnesite at 16, 20, and 26 GPa, respectively. A curious, and as yet unexplained, feature of our study is an abrupt drop in the solidus temperature between 14 and 16 GPa that causes a small amount of melting of carbonated mantle in the Transition Zone of the Earth. In the systems CMS-CO2 and CMAS-CO2 liquid compositions at 16 and 20 GPa are highly calcic bona fide carbonatites; however, these liquids revert to being magnesiocarbonatites at 10-14 and 26 GPa. In the system CMS-CO2, at 16 GPa we locate an isobaric invariant point consisting of wadsleyite + clinopyroxene + anhydrous B + magnesite + melt. The presence of anhydrous B at 16 GPa and 1475 degrees C is interesting, as it lies outside the composition space of the mantle peridotite analog we have studied. However, despite the presence of two highly magnesian silicate crystalline phases, wadsleyite and anhydrous B, at 16 GPa and 1475 degrees C, the liquid composition remains calcic with molar Ca-number [Ca/(Ca + Mg) x 100] of about 63. The melting reactions at 16 and 20 GPa (with or without anhydrous B) show that lime-bearing crystalline silicates play a fairly large part in generating and controlling the composition of the liquids. At 16 GPa, in the system CMS-CO2, we also report an experimental run at 1575 degrees C, in which liquid coexists with only wadsleyite and majorite. The liquid composition is less calcic (Ca-number 54) than that for other runs at lower temperatures, but is still more calcic than liquids at 10-14 and 26 GPa in both the studied systems. At present, the likely cause for these changes in the reported phase relations is not known. For normally assumed mantle temperatures, melting in the Transition Zone of the Earth, owing to the presence of carbonate, is probably unavoidable. The depth range of the drop in the carbonated peridotite solidus closely matches that of commonly observed low seismic velocities at similar to 400-600 km depth in the Earth.
ISSN: 0022-3530

hal-00669945
https://hal.archives-ouvertes.fr/hal-00669945
DOI : 10.1093/petrology/egr048

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The equilibrium phase relations of a mafic durbachite (53 wt.% SiO2) from the TA (TM) ebi pluton, representative of the Variscan ultrapotassic magmatism of the Bohemian Massif (338-335 Ma), have been determined as a function of temperature (900-1,100A degrees C), pressure (100-200 MPa), and H2O activity (1.1-6.1 wt.% H2O in the melt). Two oxygen fugacity ranges were investigated: close to the Ni-NiO (NNO) buffer and 2.6 log unit above NNO buffer (a dagger NNO + 2.6). At 1,100A degrees C, olivine is the liquidus phase and co-crystallized with phlogopite and augite at 1,000A degrees C for the whole range of investigated pressure and water content in the melt. At 900A degrees C, the mineral assemblage consists of augite and phlogopite, whereas olivine is not stable. The stability field of both alkali feldspar and plagioclase is restricted to low pressure (100 MPa) at nearly water-saturated conditions (< 3-4 wt.% H2O) and T < 900A degrees C. A comparison between experimental products and natural minerals indicates that mafic durbachites have a near-liquidus assemblage of olivine, augite, Ti-rich phlogopite, apatite and zircon, followed by alkali feldspar and plagioclase, similar to the mineral assemblage of minette magma. Natural amphibole, diopside and orthopyroxene were not reproduced experimentally and probably result from sub-solidus reactions, whereas biotite re-equilibrated at low temperature. The crystallization sequence olivine followed by phlogopite and augite reproduces the sequence inferred in many mica-lamprophyre rocks. The similar fractionation trends observed for durbachites and minettes indicate that mafic durbachites are probably the plutonic equivalents of minettes and that K- and Mg-rich magmas in the Bohemian Massif may have been generated from partial melting of a phlogopite-clinopyroxene-bearing metasomatized peridotite. Experimental melt compositions also suggest that felsic durbachites can be generated by simple fractionation of a more mafic parent and mixing with mantle-derived components at mid crustal pressures.
ISSN: 0010-7999

hal-00618418
https://hal.archives-ouvertes.fr/hal-00618418
DOI : 10.1007/s00410-009-0430-5

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
Accessory phases are important hosts of trace elements; allanite may contain >90% of the REE in a bulk rock. The mobility and redistribution of several trace elements, notably HREE, Th, U, and Y is thus controlled by reactions involving allanite and other REE phases, as well as several rock-forming minerals. As these elements are commonly concentrated in mature elastic sediments, a suite of impure quartzite was studied. Two eclogite facies samples from the Monometamorphic Cover Complex of the Sesia Zone (Western Italian Alps) are presented in some detail, as they reveal a remarkably rich spectrum of reaction relationships that involve REE phases.;Two allanite-forming reactions were inferred from textures and phase compositions;(1) monazite + Ca-silicate(?) + fluid -> allanite + apatite + thorite;;(2) monazite + thorite + Ca-silicate(?) + fluid -> Th-rich allanite + auerlite +/- apatite.;Petrographic observations and thermodynamic models suggest that allanite entered the HP assemblage at similar to 530 degrees C and 17-18 kbar during prograde metamorphism.;In one sample, allanite is rimmed by epidote rich in Y and HREE that grew at the expense of xenotime. Two net transfer reactions were derived;(3) xenotime + allanite + fluid -> Y-rich epidote + apatite + thorite;;(4) xenotime + allanite + fluid -> Y-rich epidote + aeschynite + thorite + (phosphate?).;Textural relationships and trace element analyses of coexisting allanite/monazite and xenotime/Y-rich epidote reveal systematic partitioning of the REE. Partition coefficients for the HREE are compatible with equilibrium fractionation, whereas those for the LREE show patterns that seem to be inherited from the precursor phases, in this case zircon with variable LREE composition.
ISSN: 0003-004X

hal-00745674
https://hal.archives-ouvertes.fr/hal-00745674
DOI : 10.2138/am.2012.3832

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We describe an experimental system including monitoring of temperature, pressure, pH, oxidation reduction potential and optical density at 600 nm, designed for studying the role of microorganisms on the geological sequestration Of CO2 and its transformation into solid carbonate phases. Measurements were performed in an artificial ground water (AGW) supplemented with urea (2 g.l(-1)) and equilibrated at controlled temperatures with a gaseous phase before bacterial inoculation. We used the ureolytic strain Bacillus pasteurii as a model carbonate precipitating bacteria and showed that it can successfully promote strong pH increases by ureolysis in the AGW equilibrated with CO2 pressures of up to I bar. Increasing salinities (5.8,13.5 and 35.0 g.l(-1)) have a positive effect on the rate of pH increase, whereas the effect of increasing temperatures (30,35 and 38 degrees C) is less important. Calcium is also shown to have a specific positive influence on the rate of ureolysis. The number of viable cells present in solution decreases greatly during the carbonate precipitation event but the population partially recovers once precipitation is over.
ISSN: 0009-2541

hal-00445282
https://hal.archives-ouvertes.fr/hal-00445282
DOI : 10.1016/j.chemgeo.2008.12.012

Éditeur(s) : Université de Bucarest - Université de Bretagne occidentale
Résumé : This study is focusing on the architecture and recent sedimentary evolution of the Danube channel, the youngest channel-levee system in the Danube deep-sea fan. The study was conducted as part of the BlaSON French-Romanian Project, and combined high-resolution seismic-reflection profiles and chirp profiles with multibeam bathymetry and piston cores. This data set was acquired in 1998 during a joint survey IFREMER-GeoEcoMar of the north-western Black Sea. Previous seismic and acoustic data were also used. The Danube deep-sea fan is a large passive-margin mud-rich fan. Like the other systems of this type (Amazon fan, Mississippi fan or Indus fan) the Danube fan consists of stacked channel-levee systems intercalated with mass-transport deposits. Seismic and sedimentary facies in the Danube fan are similar to those identified in most of the mud-rich systems. Nevertheless, the Danube fan is distinguished by a specific feature: its development in a freshwater environment. This is due to the peculiar water-level history of the Black Sea controlled by the link to the Mediterranean through the Strait of Bosphorus and the Sea of Marmara. This connexion was successively interrupted (during sea level lowstands) and re-established (when the sea level was rising above the Bosphorus). Temporary absence of marine water influx during lowstands together with large freshwater inputs from the Danube and other major rivers changed the Black Sea into a freshwater lake during times of fan activity. This peculiarity possibly favourised the development of hyperpycnal flow at the Danube mouth and the initiation of turbidity currents in the deep-sea fan. The Danube channel is directly connected to the large shelf-indenting Danube canyon (also known as Viteaz canyon). The Danube canyon is deeply incised into the shelf margin for 26 km landward of the shelfbreak. During lowstands this canyon acted as the most important path for sediment supply to the deep sea in this part of the continental margin. It consists of a main trough with steep flanks, and a meandering thalweg cut into the flat canyon floor, attesting for the development of the canyon by erosion in the entrenched axial thalweg. Sections with specific morphology, orientation and gradient identified along the canyon, are interpreted as phases of landward expansion of the canyon. Internal structure of the canyon shows several erosional surfaces, which indicate that the present morphology of the canyon is the result of its polyphasic evolution. Instability in the zone of the canyon is related to the important sediment supply at the Danube mouth, to the presence of the gas in the surficial sediment, and possibly under a structural control. The upper part of the Danube channel (between the Danube canyon and ~1400 m depth) consists in a single leveed-channel that has undergone significant overbank deposition, as attested by the well-developed levees. The levees are strongly asymmetrical, being higher and wider on the right-hand side looking downstream. This type of asymmetry is rather common in deep-sea fans, and is generally attributed to the Coriolis effect (Menard, 1955). The channel is slightly sinuous, partially filled and incised by an entrenched thalweg, connected to the axial thalweg of the Danube canyon. Detailed seismic investigation inside the channel trough documented several depositional phases within the channel fill, separated by erosional surfaces. These surfaces are associated with distinct terraces identified on the multibeam bathymetry, that can be followed downward along the main trough axis. The valley fill deposits (where not removed by the subsequent erosional event) show an axial HAR (High Amplitude Reflections) seismic facies with lateral lower amplitude continuous reflections consisting in a levee facies, as proved by sampling. This indicates that filling up was associated with flow within the channel, and not with interruption of fan activity. On the middle slope below 1400 m, this single channel bifurcates through repeated avulsions. As a result, several highly meandering channels developed. The onlap relationships between these channels indicate that only one channel was active at a time. Each phase of avulsion resulted in a depositional unit consisting in a basal unchannelized lobe defined as High Amplitude Reflection Packets (HARP, Flood et al., 1991) that underlies a channel-levee system. The deposition of HARPs was associated with the readjustment of the longitudinal profile of the channel after the breaching of a levee, which resulted in remobilization of upslope channel deposits and eroded levees. When this adjustment was complete, erosion ceased and levees began to develop above the HARPs (Pirmez et al., 1997). All the identified phases of avulsion followed the same pattern: (1) breaching of the lower and narrower left levee; (2) building of a unit of High Amplitude Reflector Packets (HARP) basinward of the bifurcation point by the unchannelized flow, while the former channel was abandoned; and (3) initiation of a new meandering leveed channel. The northward migration of the resulting units through repeated bifurcations is influenced by the asymmetry between levees (hence by the Coriolis effect), and confined between the high levees of the initial phase of the Danube channel (to the south) and the steep relief of the Dniepr fan (to the north). Structure of the fan valley fill indicate that the erosional surfaces inside the upper channel could be formed in response of successive avulsions, by the adjustment of the longitudinal profile of the channel following the breaching of a levee wall. Sediments removed by erosion formed the HARP lobes basinward of the avulsion point. When this adjustment was complete, a channel-levee system developed downward of the bifurcation, overlying the HARPs, but also upward of this point, as a confined channel-levee system inside the erosional trough of the fan valley. Fluvial incisions identified on the continental shelf, together with the coastline location during the last active period of the Danube channel, indicated that the paleo-Danube was directed towards the head of the Danube canyon. Paleo-Danube mouth was fairly close (ca. 10 km) to the Danube canyon, supplying sediment to the Danube channel. Furthermore, hyperpycnal flow probably prevailed in the freshwater environment that characterized the Black Sea during times of fan activity. These conditions would have enabled the development of a quasi-continuous river-canyon-deep-sea fan system, ensuring the effective transfer of the sediment between the coastal zone and the deep sea.
Ce travail est consacré à l'étude de l'architecture et de l'évolution sédimentaire récente de l'éventail profond du Danube, en particulier de son dernier système chenal-levée: le chenal du Danube. L'étude a été réalisée dans le cadre du projet de coopération franco-roumaine BlaSON, à partir des données sismiques, bathymétriques-acoustiques et sédimentologiques acquises en 1998 lors d'une campagne en mer Noire réalisée par IFREMER et GeoEcoMar. Des données sismiques et acoustiques antérieures ont été également utilisées. L'éventail profond du Danube s'enserre dans la catégorie des grands éventails vaseux. Comme les autres systèmes de ce genre (tel que les éventails de l'Amazone, du Mississippi ou de l'Indus) il est constitué d'une succession de systèmes chenaux-levées intercalés avec des dépôts de transport en masse. Le fonctionnement de l'éventail était conditionné par la baisse du niveau marin lors des périodes glaciaires. Ses faciès sismiques et sédimentaires s'apparentent aux faciès qui caractérisent la plupart des éventails de ce type. L'éventail du Danube constitue néanmoins un cas particulier parmi les autres systèmes étudiés, du fait de son fonctionnement dans un bassin lacustre. Ceci est dû à la situation spécifique de la mer Noire dont la connexion avec la Méditerranée, par le détroit de Bosphore et la mer de Marmara, a été successivement interrompue (au cours de périodes de bas niveau) et reprise (quand le niveau marin remontait en dépassant le seuil du Bosphore). L'absence de l'apport d'eau salée pendant les périodes glaciaires, associée avec l'augmentation de l'apport fluvial, ont déterminé l'installation d'un milieu d'eau douce dans la mer Noire à chaque fois que la baisse du niveau permettait la reprise du fonctionnement de l'éventail profond. Cette situation particulière aurait favorisé la formation des courants hyperpycnaux à l'embouchure d'un fleuve du débit du Danube qui déversait ses eaux turbides dans un bassin lacustre, et aurait donc influencé l'apparition de courants de turbidité dans l'éventail profond. Le chenal du Danube s'est développé sur la pente continentale en prolongation du canyon du Danube (ou Viteaz) auquel il est directement connecté. Le canyon est incisé de manière significative (26 km) dans la plate-forme continentale. Au cours de bas-niveaux marins il constituait la principale voie de transfert des sédiments terrigènes vers le bassin profond dans cette partie de la marge. Le canyon est constitué par une entaille avec des flancs abrupts et un talweg axial incisé, qui montre l'importance du processus d'érosion du fond pour le développement du canyon. Les segments qui ont été identifiés le long du canyon, avec des morphologies, des orientations et des pentes spécifiques, sont interprétés comme des phases d'avancement du canyon vers la côte. Plusieurs incisions sont visibles dans la structure interne du canyon et témoignent que la morphologie actuelle du canyon est le résultat de son évolution polyphasée. L'instabilité de la zone du canyon est en relation avec les apports sédimentaires importants à l'embouchure du Danube, avec la présence du gaz dans les sédiments superficiels, et possiblement sous un contrôle structural. Sur la pente supérieure (entre le canyon du Danube et environ 1400 m de profondeur) le chenal du Danube présente des levées bien développées et fortement asymétriques, avec la levée droite plus haute et plus large que la levée gauche. Ce type d'asymétrie, fréquemment décrit dans les éventails profonds est généralement attribué à l'effet Coriolis (Menard, 1955). Le chenal est légèrement sinueux, partiellement comblé et incisé par un talweg axial qui représente la continuation sur la pente du talweg incisé dans le canyon du Danube. L'analyse sismique détaillée du remplissage de la vallée montre plusieurs phases de dépôt, séparées par des discontinuités érosives. Ces surfaces d'érosion correspondent à des terrasses emboîtées, relativement parallèles le long de la vallée, visibles dans la bathymétrie. Les dépôts qui constituent le remplissage du chenal présentent un faciès sismique de type HAR (High Amplitude Reflections) dans l'axe du chenal, partiellement (ou parfois totalement) enlevé par les phases d'érosion subséquentes, qui continue latéralement avec des réflexions litées correspondant à un faciès sédimentaire de levée. Le remplissage de la vallée a été donc associé avec des écoulements dans le chenal, et non pas avec l'interruption de son fonctionnement. Sur la pente inférieure, le chenal unique bifurque plusieurs fois par avulsion et forme de nouveaux systèmes chenaux-levées méandriformes. Ces systèmes se succèdent verticalement en onlap, ce qui montre qu'un seul chenal a été actif à la fois. Chaque phase d'avulsion a eu comme résultat la mise en place d'une unité constituée par un lobe défini comme "High Amplitude Reflection Packets" (HARP, Flood et al., 1991) à la base, et un système chenal-levée au sommet. Le dépôt d'un lobe HARP est associé avec de l'érosion dans le chenal en amont du point d'avulsion pour l'ajustement de son profil après la rupture de la levée. Quand le chenal a retrouvé son profil d'équilibre, l'érosion a cessé et des levées ont commencé à se développer au-dessus des HARPs (Pirmez et al., 1997). Toutes les phases d'avulsion se sont développées d'après le même modèle: (1) la rupture de la levée gauche, plus étroite; (2) le dépôt d'un lobe HARP par les écoulements non-chenalisés en aval du point d'avulsion, et l'abandon de l'ancien chenal; (3) l'initiation d'un nouveau système chenal-levée. La migration systématique du chenal vers le nord est influencée par l'assymétrie des levées (donc par la force de Coriolis), et confinée entre les grandes levées de la phase initiale du chenal du Danube, au sud, et le relief abrupt de l'éventail du Dniepr au nord. La structure sédimentaire du chenal du Danube indique que les surfaces érosives à l'intérieur du remplissage du chenal se seraient formées en réponse aux avulsions, du fait de l'ajustement du profil du chenal après la rupture d'une levée. Les sédiments du chenal érodés au cours de ce processus ont formé les lobes HARP. Quand le chenal a retrouvé son profil d'équilibre, un système chenal-levée s'est développé en aval du point d'avulsion au dessus du lobe HARP, mais aussi en amont de ce point, où il se trouve confiné dans la vallée érosive. Les incisions fluviatiles identifiés sur la plate-forme continentale et la position de la ligne de côte pendant la dernière période d'activité du chenal du Danube montrent que le paléo-Danube se dirigeait directement vers la tête du canyon du Danube. Son embouchure était située à proximité du canyon, qui alimentait le chenal du Danube. Cependant, les courants hyperpycnaux devaient prévaloir dans le milieu de salinité réduite qui caractérisait la mer Noire lors des périodes actives de l'éventail. Ces conditions auraient favorisé la mise en place d'un système quasi-continu fleuve-canyon-éventail profond, qui contrôlait le transfert des sédiments entre la côte et le bassin profond.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2002/these-1206.pdf
http://archimer.ifremer.fr/doc/00000/1206/

Éditeur(s) : HAL CCSD Elsevier
Résumé : High-precision Ni isotopic variations are reported for the metal phase of equilibrated and unequilibrated ordinary chondrites, carbonaceous chondrites, iron meteorites, mesosiderites, and pallasites. We also report new Zn and Cu isotopic data for some of these samples and combine them with literature Fe, Cu, and Zn isotope data to constrain the fractionation history of metals during nebular (vapor/solid) and planetary (metal/sulfide/silicate) phase changes. The observed variations of the Ni-62/Ni-58, Ni-61/Ni-58, and Ni-60/Ni-58 ratios vary linearly with mass difference and define isotope fractionation lines in common with terrestrial samples. This implies that Ni was derived from a single homogeneous reservoir. While no Ni-60 anomaly is detected within the analytical uncertainties, Ni isotopic fractionation up to 0.45 parts per thousand per mass-difference unit is observed. The isotope compositions of Ni and Zn in chondrites are positively correlated. We suggest that, in ordinary chondrites, exchange between solid phases, in particular metal and silicates, and vapor followed by mineral sorting during accretion are the main processes controlling these isotopic variations. The positive correlation between Ni and Zn isotope compositions contrasts with a negative correlation between Ni (and Zn) and Cu isotope compositions, which, when taken together, do not favor a simple kinetic interpretation. The observed transition element similarities between different groups of chondrites and iron meteorites are consistent with the genetic relationships inferred from oxygen isotopes (IIIA/pallasites and IVA/L chondrites). Copper is an exception, which we suggest may be related to separate processing of sulfides either in the vapor or during core formation. (C) 2007 Elsevier Ltd. All rights reserved.
ISSN: 0016-7037

hal-00408304
https://hal.archives-ouvertes.fr/hal-00408304
DOI : 10.1016/j.gca.2007.06.049

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The indoor gas-phase concentrations of semi-volatile organic compounds (SVOCs) can be predicted from their respective concentrations in airborne particles by applying the particle/gas partitioning equilibrium. The temperature used for partitioning is often set to 25 °C. However, indoor temperatures frequently differ from this reference value. This assumption may result in errors in the predicted equilibrium gas-phase SVOC concentrations. To improve the prediction model, the temperature dependence of the particle/gas partition coefficient must be addressed. In this paper, a theoretical relationship between the particle/gas partition coefficient and temperature was developed based on the SVOC absorptive mechanism. The SVOC particle/gas partition coefficients predicted by employing the derived theoretical relationship agree well with the experimental data retrieved from the literature (R > 0.93). The influence of temperature on the equilibrium gas-phase SVOC concentration was quantified by a dimensionless analysis of the derived relationship between the SVOC particle/gas partition coefficient and temperature. The predicted equilibrium gas-phase SVOC concentration decreased by between 31% and 53% when the temperature was lowered by 6 °C, while it increased by up to 750% when the indoor temperature increased from 15 °C to 30 °C.
ISSN: 0048-9697

hal-01313749
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01313749
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01313749/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01313749/file/Temperature%20dependence%20of%20the%20particle%20gas%20partition%20coefficient_accepted.pdf
DOI : 10.1016/j.scitotenv.2016.04.106

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Garnet growth in high-pressure, mafic garnet granulites formed by dehydration melting of hornblende-gabbronorite protoliths in the Jijal complex (Kohistan palaeo-island arc complex, north Pakistan) was investigated through a microstructural EBSD-SEM and HRTEM study. Composite samples preserve a sharp transition in which the low-pressure precursor is replaced by garnet through a millimetre-sized reaction front. A magmatic foliation in the gabbronorite is defined by mafic-rich layering, with an associated magmatic lineation defined by the shape-preferred orientation (SPO) of mafic clusters composed of orthopyroxene (Opx), clinopyroxene (Cpx), amphibole (Amp) and oxides. The shape of the reaction front is convoluted and oblique to the magmatic layering. Opx, Amp and, to a lesser extent, Cpx show a strong lattice-preferred orientation (LPO) characterized by an alignment of [001] axes parallel to the magmatic lineation in the precursor hornblende-gabbronorite. Product garnet (Grt) also displays a strong LPO. Two of the four < 111 > axes are within the magmatic foliation plane and the density maximum is subparallel to the precursor magmatic lineation. The crystallographic relationship < 111 >(Grt)//[001](Opx,Cpx,Amp) deduced from the LPO was confirmed by TEM observations. The sharp and discontinuous modal and compositional variations observed at the reaction front attest to the kinetic inhibition of prograde solid-state reactions predicted by equilibrium-phase diagrams. The P-T field for the equilibration of Jijal garnet granulites shows that the reaction affinities are 5-10 kJ mol.(-1) for the Grt-in reaction and 0-5 kJ mol.(-1) for the Opx-out reaction. Petrographic and textural observations indicate that garnet first nucleated on amphibole at the rims of mafic clusters; this topotactic replacement resulted in a strong LPO of garnet. Once the amphibole was consumed in the reaction, the parallelism of [001] axes of the mafic-phase reactants favoured the growth of garnet crystals with similar orientations over a pyroxene substrate. These aggregates eventually sintered into single-crystal garnet. In the absence of deformation, the orientation of mafic precursor phases conditioned the nucleation site and the crystallographic orientation of garnet because of topotaxial transformation reactions and homoepitaxial growth of garnet during the formation of high-pressure, mafic garnet-granulite after low-pressure mafic protoliths.
ISSN: 0263-4929

hal-00411323
https://hal.archives-ouvertes.fr/hal-00411323
DOI : 10.1111/J.1525-1314.2008.00789.x

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
We report here U-series and trace element data for an olivine-melilitite lava flow, erupted in 1957 in the Virunga volcanic field and known as the Mugogo eruption. Petrological and geochemical data show that the Mugogo magma represents a primary mantle melt, derived from a low degree of melting of a metasomatised mantle source. It is highly enriched in very incompatible trace elements (e.g. more than 300-fold compared to primitive mantle for Th), with a distinctly lower enrichment in Rb, Ba and Sr. The high Th/U and low (230Th/232Th) ratios (4.4 and 0.750, respectively, with a (230Th/238U) ratio of 1.09) are close to the values found for the Nyamuragira basanites. But the most striking feature is the very low (226Ra/230Th) ratio of 0.48, the lowest ever measured in a mafic volcanic rock. The most probable origin of this Ra deficit is the presence of phlogopite (having a high Ra partition coefficient) in the lithospheric mantle, either as a residual phase during low-degree isobaric melting (in batch-melting or a diffusion-controlled melting models), or in a phlogopite-bearing upper mantle through which the melt migrates and equilibrates (in an equilibrium porous flow model commonly used to describe adiabatic melting). The disequilibrium pattern (230Th) > (238U) > (210Pb) ≫ (226Ra), reversed compared to the pattern observed in the Oldoinyo Lengai natrocarbonatite, suggests that a carbonatite melt might have been involved to explain the Ra deficit. We thus discuss the possibility of an early separation of a Ra-enriched carbonate melt either from the olivine-melilitite melt or from a carbonated mantle source, followed by the production of a low-degree melt of olivine-melilitite composition, but the lack of available experimental, petrological and geochemical evidences makes this process somewhat speculative at present. Further studies of recent (<5 ky) olivine-melilitites are needed to check whether the large Ra deficit is a general characteristic of this type of magma that can be used to constrain models of its formation.
ISSN: 0010-7999

hal-01174173
https://hal.archives-ouvertes.fr/hal-01174173
DOI : 10.1007/s00410-015-1124-9

Éditeur(s) : HAL CCSD American Physical Society
Résumé : We study the equilibrium properties of a liquid phase condensed at the nanoscale between the surfaces of a sharp crack in fused silica in a moist controlled atmosphere. The extension of the condensed phase along the fracture is measured by in situ atomic force microscopy phase imaging and it is shown to be determined by a critical distance between the opposite crack surfaces, which is an increasing function of humidity. The present technique is very promising for measuring the properties of confined liquids at the nanoscale as well as for modeling the physics and chemistry of slow crack propagation in glasses.
ISSN: 0031-9007

hal-00411946
https://hal.archives-ouvertes.fr/hal-00411946
DOI : 10.1103/PhysRevLett.100.165505

Éditeur(s) : HAL CCSD Elsevier
Résumé : Understanding chemical element mobility during high-pressure metamorphism is paramount to the knowledge of the transformations occurring during the course of eclogite-facies metamorphism. In particular, the role of deformation and fluid circulation appear essential. In order to better decipher this role, we investigated two eclogite-facies samples from the Lindas Nappe in the Bergen arcs (Norwegian Caledonides), which are related to a fluid/deformation metamorphic event. This study, based on detailed microtextural investigations, coupled with major and trace element analyses, either in situ EMPA and LA-ICP-MS or by conventional ICP-MS nebulisation on mineral fractions, illustrates the complexity of chemical reactions accompanying the eclogite- and amphibolite-facies metamorphism. A single eclogite-facies mineral species two eclogite-facies (i.e. phengite and epidote) depicts various chemical features depending on its textural location at thin-section scale. The correlation with the mineralogical reaction occurring in each textural site demonstrates that the compositional variations are inherited from the precursor minerals. Thus, the composition of eclogite-facies minerals is locally controlled by the composition of few hundred-micron domains. On the contrary, alteration phases of the amphibolite facies (symplectite and calcic amphibole) display clear enrichment in LILE, Pb, Sr and LREE compared to their precursor minerals (omphacite and garnet). This supports that the transport of elements at hand-sample scale was enhanced during the retrogression and elements were efficiently delocalised from one textural site to another. The contrasting behaviour of element mobility between peak eclogite-facies metamorphism and retrogression can be explained in terms of rate processes and fluid/deformation activity. During eclogitisation,deformation allows the formation of textural and mineralogical microdomains. Contemporaneously the fluid circulation favours the development of heterogeneities by transport of elements in excess towards areas protected from deformation where phengite-bearing quartz lenses crystallise. This, together with the very fast recrystallisation of eclogite-facies minerals, results in a heterogeneous redistribution of elements at sample scale and in a chemical disequilibrium between different microdomains of hundred-micron size. During retrogression in the amphibolite facies, coeval with long-term ductile deformation, the fluids act as an efficient vector to redistribute the elements from a given textural site to another and, thus, allow to reach, at hand-sample scale, a new chemical equilibrium between the different crystallising phases.
ISSN: 0024-4937

hal-00404602
https://hal.archives-ouvertes.fr/hal-00404602
DOI : 10.1016/j.lithos.2006.10.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To constrain the relations between deformation and metasomatism in the subcratonic lithospheric mantle, we have analyzed the microstructures and crystal preferred orientations in 50 mantle xenoliths from the Kaapvaal craton. Water contents in olivine and pyroxenes were measured in 14 samples equilibrated at different depths. Coarse-granular microstructures recording deformation by dislocation creep followed by annealing predominate. Mylonitic (sheared) peridotites with partially or totally recrystallized microstructures are however common below 140 km. Refractory compositions predominate, but multiple metasomatic events resulted in orthopyroxene enrichment or secondary crystallization of clinopyroxene and phlogopite. Coherent orthopyroxene and olivine CPO in most coarse-grained peridotites implies in pre- to syn-kinematic orthopyroxene enrichment or epitaxial growth on primary orthopyroxene. Undeformed, interstitial orthopyroxene, clinopyroxene, and phlogopite with random orientations in coarse-grained peridotites record post-kinematic modal metasomatic events. Deformation of these phases in the sheared peridotites implies that mylonitization results from a later event, which affected locally the deep cratonic lithosphere. Olivine CPO recording dominant [100] glide predominate at all depths. Only two samples, equilibrated at ~ 3.3 GPa show olivine [001] and orthopyroxene [001] axes subparallel, suggesting dominant [001] glide. Water contents in olivine are maximum (150 wt. ppm H2O) in peridotites equilibrated at ~ 160 km depth. Peridotites equilibrated below 180 km depth are, in contrast, almost dry. Lack of correlation between olivine mg# and water content indicates that the high water contents in olivine record re-hydration after the extensive partial melting, which produced the cratonic root. The vertical variation in water contents in olivine observed in the Kaapvaal peridotites may result from hydrogen addition or loss during extraction by the kimberlites. Comparison with magnetotelluric electrical conductivity data suggests, however, that the observed vertical variation of water contents in olivine may be representative of the present-day state of the Kaapvaal mantle, implying that extensive metasomatism resulted in hydration of the cratonic mantle at intermediate depths. The annealed microstructures of Kaapvaal peridotites indicate however that this metasomatism was not followed by remobilization of the cratonic root.
ISSN: 0024-4937

hal-00750328
https://hal.archives-ouvertes.fr/hal-00750328
DOI : 10.1016/j.lithos.2012.05.001

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : Solidus phase relations of carbon dioxide-saturated (CO2 vapor) model peridotite in the system CaO-MgO-Al2O3-SiO2-CO2 in the 1.1-2.1 GPa pressure range are reported. The solidus has a positive slope in pressure-temperature (PT) space from 1.1 to 2 GPa. Between 2 and 2.1 GPa, the melting curve changes to a negative slope. From 1.1 to 1.9 GPa, the liquid, best described as CO2-bearing silicate liquid, is in equilibrium with forsterite, orthopyroxene, clinopyroxene, spinel, and vapor. At 2 GPa, the same crystalline phase assemblage plus vapor is in equilibrium with two liquids, which are silicate and carbonatitic in composition, making the solidus at 2 GPa PT invariant. The presence of two liquids is interpreted as being due to liquid immiscibility. Melting reactions written over 1.1-1.9 GPa are peritectic, with forsterite being produced upon melting, and the liquid is silicate in composition. Upon melting at 2.1 GPa, orthopyroxene is produced, and the liquid is carbonatitic in composition. Hence, the invariance between 1.9 and 2.1 GPa is not only the reason for the dramatic change in the liquid composition over an interval of 0.2 GPa, but the carbonated peridotite solidus ledge itself most likely appears because of this PT invariance. It is suggested that because carbonatitic liquid is produced at the highest solidus temperature at 2 GPa in PT space in the system studied, such liquids, in principle, can erupt through liquid immiscibility, as near-primary magmas from depths of approximately 60 km.
ISSN: 0148-0227

hal-00939406
https://hal.archives-ouvertes.fr/hal-00939406
DOI : 10.1002/jgrb.50249

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
Arenal volcano is nearly unique among arc volcanoes with its 42 year long (1968–2010) continuous, small-scale activity erupting compositionally monotonous basaltic andesites that also dominate the entire, ~7000 year long, eruptive history. Only mineral zoning records reveal that basaltic andesites are the result of complex, open-system processes deriving minerals from a variety of crystallization environments and including the episodic injections of basalt. The condition of the mafic input as well as the generation of crystal-rich basaltic andesites of the recent, 1968–2010, and earlier eruptions were addressed by an experimental study at 200 MPa, 900–1,050 °C, oxidizing and fluid-saturated conditions with various fluid compositions [H2O/(H2O + CO2) = 0.3–1]. Phase equilibria were determined using a phenocryst-poor (~3 vol%) Arenal-like basalt (50.5−wt% SiO2) from a nearby scoria cone containing olivine (Fo92), plagioclase (An86), clinopyroxene (Mg# = 82) and magnetite (Xulvö = 0.13). Experimental melts generally reproduce observed compositional trends among Arenal samples. Small differences between experimental melts and natural rocks can be explained by open-system processes. At low pressure (200 MPa), the mineral assemblage as well as the mineral compositions of the natural basalt were reproduced at 1,000 °C and high water activity. The residual melt at these conditions is basaltic andesitic (55 wt% SiO2) with 5 wt% H2O. The evolution to more evolved magmas observed at Arenal occurred under fluid-saturated conditions but variable fluid compositions. At 1,000 °C and 200 MPa, a decrease of water content by approximately 1 wt% induces significant changes of the mineral assemblage from olivine + clinopyroxene + plagioclase (5 wt% H2O in the melt) to clinopyroxene + plagioclase + orthopyroxene (4 wt% H2O in the melt). Both assemblages are observed in crystal-rich basalt (15 vol%) and basaltic andesites. Experimental data indicate that the lack of orthopyroxene and the presence of amphibole, also observed in basaltic andesitic tephra units, is due to crystallization at nearly water-saturated conditions and temperatures lower than 950 °C. The enigmatic two compositional groups previously known as low- and high-Al2O3 samples at Arenal volcano may be explained by low- and high-pressure crystallization, respectively. Using high-Al as signal of deeper crystallization, first magmas of the 1968–2010 eruption evolved deep in the crust and ascent was relatively fast leaving little time for significant compositional overprint by shallower level crystallization.
ISSN: 0010-7999

hal-01115717
https://hal.archives-ouvertes.fr/hal-01115717
DOI : 10.1007/s00410-014-1040-4

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
In the Wadi Haymiliyah of the Oman ophiolite (Haylayn block), discordant wehrlite bodies ranging in size from tens to hundreds of meters intrude the lower crust at different levels. We combined investigations on natural wehrlites from the Wadi Haymiliyah section with an experimental study on the phase relations in a wehrlitic system in order to constrain the petrogenesis of the crustal wehrlites of the Oman ophiolite. Secondary ion mass spectrometry analyses of clinopyroxenes from different wehrlite bodies imply that the clinopyroxenes were crystallized from tholeiitic, mid-ocean ridge (MORB)-type melts. The presence of primary magmatic amphiboles in some wehrlites suggests a formation under hydrous conditions. Significantly enhanced Sr-87/Sr-86 isotope ratios of separates from these amphiboles imply that the source of the corresponding magmatic fluids was either seawater or subduction zone-related. The experiments revealed that under wet conditions at relatively low temperatures, a MORB magma has the potential to produce wehrlite in the ocean crust by accumulation of early olivine and clinopyroxene. These show typically high Mg# which is a consequence of the oxidizing effect of the prevailing high aH(2)O. First plagioclases crystallizing after clinopyroxene under wet conditions are high in An content, in contrast to the corresponding dry system. Trace element compositions of clinopyroxenes of those wehrlites from the Moho transition zone are too depleted in HREE to be in equilibrium with present-day MORB, implying a genetic relation to the V2 lavas of the Oman ophiolite, which are interpreted to be the result of fluid-enhanced melting of previously depleted mantle. We present a model on the petrogenesis of the crustal wehrlites in an upper mantle wedge above an initial, shallow subduction zone at the beginning of the intraoceanic thrusting.
ISSN: 1525-2027

hal-00429373
https://hal.archives-ouvertes.fr/hal-00429373
DOI : 10.1029/2009GC002488

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Melting phase relations of model carbonated peridotite in the system CaO-MgO-Al2O3-SiO2-CO2 from 2 to 3 GPa are reported. Experimentally produced melts, which are model carbonatites, with approximately 36-40 wt % CaO, 12-17 wt % MgO, 0.2-1.5 wt % Al2O3, 1-4 wt % SiO2, and 40-42 wt % CO2 (carbon dioxide) are present at all pressures investigated. At 2.8 and 3 GPa, carbonatitic melts are seen experimentally at temperatures that are very close to the vapor-free (CO2) peridotite solidus and are found in equilibrium with forsterite, orthopyroxene, clinopyroxene, and garnet. Solidus phase relations with isobaric and pressure-temperature invariant points, defining the so-called carbonated peridotite solidus ledge, are also reported from 2.1 to 3 GPa. A divariant region exists from 2 to 2.6 GPa wherein two, compositionally different melts are present. In this region, these two melts, carbonatitic and silicate in composition, coexist with crystalline phase assemblage and free vapor. The silicate liquid has approximately 30-48 wt % SiO2 and approximately 6 to 20 wt % of dissolved CO2. The presence of carbonatitic and silicate liquids is interpreted to be due to liquid immiscibility. On the basis of melting phase relations reported here, we conclude that (a) the ledge is a feature along which model carbonatitic liquids are produced by reaction of silicates and CO2 vapor and (b) alkali-free carbonatites and silicate melts can form through melt unmixing at depths of ~60-80 km in the Earth's mantle.
ISSN: 0148-0227

hal-01053913
https://hal.archives-ouvertes.fr/hal-01053913
DOI : 10.1002/2013JB010913

Éditeur(s) : HAL CCSD Elsevier
Résumé : Carbon emission at volcanic centers requires a constant balance between output (mostly by volcanism, either at plate boundaries or intraplate) and input (mostly at trench settings) of carbon from and to the Earth's mantle. The form of carbon that resides in the mantle is controlled by depth (pressure) and oxygen fugacity, the latter in turn depending on the depth and the concentration of iron in the mantle. In the shallow, lithospheric mantle, carbon is likely to be present in the oxidized form of CO2 (except under cratons where carbon is reduced to graphite or diamond). Below approximately 90 km, in the asthenosphere, the oxidized form of carbon is carbonate, either mineral or melt, depending on the thermal regime. At depths greater than approximately 150 km, the asthenospheric mantle is too reducing for carbon to stay in its oxidized form and only diamond is present, unless there is sufficient hydrogen to form reduced C–H fluids. Hence, the region located in the depth range of 90 to 150 km deep is where carbonatitic melts can most likely be produced and impregnate the surrounding mantle through metasomatism. The upper bound of this region is called the carbonate ledge. This limit prevents carbonate (either solid or molten) from ascending because of degassing and CO2 liberation. The lower bound is a redox front where redox melting (that is, melting caused by oxidation) may take place in an ascending portion of carbon-containing mantle. Carbonatite eruptions and presence of carbonate mineral inclusions in deep-seated diamonds provide evidence that these boundaries can be trespassed in some cases.An analysis of the experimental data that has bearing on silicate melting in the presence of carbon further shows that the carbonate ledge is a melting curve with a negative or flat Clapeyron (dP/dT) slope. In the carbonated ultrabasic (peridotite) systems, the carbonate ledge is located between ~ 2–3 GPa. The ledge divides the pressure–temperature space into a region of low-pressure silicate melt production, and a high-pressure region where carbonatites can be produced. Carbonatitic melts in equilibrium with mantle peridotite have compositions close to dolomitic (approximately equal amounts of Ca and Mg) with a general trend of becoming markedly more magnesian with increasing pressure. Calcic carbonatites may be stable at pressures < 2 GPa if clinopyroxene is absent. At mantle transition zone pressure range, there seems to be a melting temperature decrease (negative fusion slope), which may be caused by the stabilization of majoritic garnet.The carbonated basic (broadly eclogitic) system is more complex than the peridotitic one, because of the strong control of bulk silicate composition on melting temperatures, and hence, on melt composition. In carbonated eclogite systems, we propose that the effect of bulk composition upon all observed features can perhaps be related to silica super-saturation, or lack thereof. In some cases, high calcium (> 80 mol% CaCO3) melts can be produced, making the melting of carbonated eclogites an appealing scenario for the genesis of calcio-carbonatites in the Earth's mantle. Comparison with modeled pressure–temperature paths of subducted oceanic lithosphere shows that fusion of carbonated eclogite at depths shallower than 200 km should be expected for hot (Cascadian-type) subduction thermal regimes. On the other hand, in the case of cooler thermal regimes (Honshu-type, for instance), subducted carbonates may be stable to greater depths in Earth at trench settings, depending on the bulk composition of the system.Furthermore, high-pressure experiments show evidence of a continuum among carbonatitic, kimberlitic, melilititic, and basaltic liquids, for increasing melting degree of carbonated peridotite. This continuum has not been documented in the case of fusion of carbonated eclogite. It may be present, however, when certain sediments are fused, although the silicate melts are granitic to rhyodacitic instead of being kimberlitic in composition. Additional high-pressure work on phase relations in the simple binary system CaCO3–MgCO3 and specific focus on oxide solubility in the vapor phase have the potential to further clarify phase relations on complex silicate–carbonate systems at mantle conditions.
ISSN: 0009-2541

hal-01277770
https://hal.archives-ouvertes.fr/hal-01277770
DOI : 10.1016/j.chemgeo.2015.05.018

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
The Cerro del Almirez massif (Spain) represents a unique fragment of serpentinized oceanic lithosphere that has been first equilibrated in the antigorite stability field (Atg-serpentinites) and then dehydrated into chlorite–olivine–orthopyroxene (Chl-harzburgites) at eclogite facies conditions during subduction. The massif preserves a dehydration front between Atg-serpentinites and Chl-harzburgites. It constitutes a suitable place to study redox changes in serpentinites and the nature of the released fluids during their dehydration. Relative to abyssal serpentinites, Atg-serpentinites display a low Fe3+/FeTotal(BR) (=0.55) and magnetite modal content (=2.8–4.3 wt%). Micro-X-ray absorption near-edge structure (μ-XANES) spectroscopy measurements of serpentines at the Fe–K edge show that antigorite has a lower Fe3+/FeTotal ratio (=0.48) than oceanic lizardite/chrysotile assemblages. The onset of Atg-serpentinites dehydration is marked by the crystallization of a Fe3+-rich antigorite (Fe3+/FeTotal = 0.6–0.75) in equilibrium with secondary olivine and by a decrease in magnetite amount (=1.6–2.2 wt%). This suggests a preferential partitioning of Fe3+ into serpentine rather than into olivine. The Atg-breakdown is marked by a decrease in Fe3+/FeTotal(BR) (=0.34–0.41), the crystallization of Fe2+-rich phases and the quasi-disappearance of magnetite (=0.6–1.4 wt.%). The observation of Fe3+-rich hematite and ilmenite intergrowths suggests that the O2 released by the crystallization of Fe2+-rich phases could promote hematite crystallization and a subsequent increase in fo2 inside the portion of the subducted mantle. Serpentinite dehydration could thus produce highly oxidized fluids in subduction zones and contribute to the oxidization of the sub-arc mantle wedge.
ISSN: 0010-7999

hal-01172310
https://hal.archives-ouvertes.fr/hal-01172310
DOI : 10.1007/s00410-015-1130-y