Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The island of Taiwan is affected by intense seismic activity, which includes large events as the disastrous 1999 Chi-Chi earthquake. To improve seismic hazard assessment in this area, we estimate the effect of both interseismic loading and major events since 1736 on the state of stress of major active faults. We focus our approach on western Taiwan, which is the most densely populated part of Taiwan. We pay a specific attention to faults geometry and to both interseismic and coseismic slip distributions. Our results suggest that both earthquakes and interseismic loading before 1999 increase the Coulomb stress in the north-western part of the Chelungpu fault, a region which experienced the highest coseismic slip during the Chi-Chi earthquake. More importantly our results reveal a Coulomb stress increase in the southern part of the Changhua thrust fault, below a densely populated area.
ISSN: 0094-8276

hal-00475590
https://hal.archives-ouvertes.fr/hal-00475590
DOI : 10.1029/2009GL042292

Éditeur(s) : HAL CCSD
Résumé : The Tyrrhenian Sea is usually interpreted to be a Neogene back-arc basin that opened by continental rifting and oceanic spreading caused by the eastward migration of the Apennine subduction system from Tortonian to Pliocene times. Rifting of the Tyrrhenian Sea started first along the Eastern Sardinian margin during the Tortonian-Messinian times. The " METYSS " project aims at better constraining the relations between crustal tectonics, salt tectonics and sedimentation from Messinian times to present-day. The " METYSS 1 " cruise (2009, R/V "Téthys II"-INSU) allowed us to obtain about 1200 km of high-resolution seismic reflection profiles along the SE Corsican margin, and along the upper and middle parts of the Eastern Sardinian margin, Western Tyrrhenian. This new dataset clearly illustrates that this area has been highly dissected during the rifting stage by N-S trending normal faults delineating ridges and basins, as previously described. The Messinian seismic markers (UU and MU) locally display fan-shaped stratal geometries, but the mechanism responsible for such geometries, i.e., salt tectonics or rifting, has yet to be carefully deciphered. We also mapped the spatial distribution of the mobile salt (MU). The highly variable thickness of the confined salt basins may be related to the initial pre-Messinian basin geometry or to the fact that sediment deposition was syn-rift. Southeastward, salt tectonics appears highly vigorous. More surprisingly, our data demonstrate that some of the major faults have been significantly reactivated during the post-rift period, up to late Quaternary time. Such recent fault activity has been recorded by bathymetric scarps and associated footwall debris flows. Moreover, some of this post-rift deformation can be evidenced within the Plio-Quaternary sequence by a regional unconformity. The post-Miocene deformation style varies greatly between different areas of the margin, and can also be strongly influenced by the presence or absence of mobile Messinian evaporites (MU).
13ème Congrès Français de Sédimentologie
Dijon, France

hal-00657310
https://hal-brgm.archives-ouvertes.fr/hal-00657310

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Tapajós Domain in the Amazonian Craton comprises hundreds of gold occurrences mainly hosted by Paleoproterozoic granitic rocks, whose geotectonic evolution and deformation style are poorly understood. The Tocantinzinho granite hosts a large amount of gold, forming the largest gold deposit known in the Tapajós Domain. The Tocantinzinho area is formed by plutonic rocks cut by subvolcanic rocks shallowly emplaced and constrained by NW-SE strike-slip faults, probably in a transtensive site. The magmatism started with the emplacement of huge granodiorite that presently formed the basement country rocks (2007–1997Ma), it was followed by the Tocantinzinho granite magmatism (1989–1979 Ma), and the coeval to late andesite emplacement. Petrological and textural evidence suggest the complex and synchronous occurrence of tectonics and few magmatic events expressed by the emplacement of successive granite, aplite, pegmatite, andesite, and dacite. The magmatic event finished with the cooling of this set of rocks below c. 320 °C, at c. 1950 Ma. The cooling rates vary from c. 3.6–14.7°C/Ma, with an average of 7.5°C/Ma, indicating no important vertical exhumations. The elongated geometry of the Tocantinzinho granite and related rocks, features of solid-state deformation within granites and syntectonic deformation of some andesite dikes imply the existence of wrench type tectonic control. The I-type signature of these rocks, their high-K calc-alkaline and metaluminous to peraluminous affinities combined with the tectonic style indicate a post-collisional tectonic setting. Based on geochemical and structural constrains, the rocks from the Tocantinzinho area are interpreted as a part of the Creporizão Suite and probably represent the first expressions of this syn-to late-tectonic magmatism in the region. A continuous and progressive process of magmatic emplacement controlled by tectonics will be proposed and discussed in conclusion.
ISSN: 0895-9811

hal-01526936
https://hal.archives-ouvertes.fr/hal-01526936
DOI : 10.1016/j.jsames.2017.02.003

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Fault pseudotachylytes form by frictional melting during seismic slip and therefore are widely interpreted as “earthquake fossils.” Rapid movement along a rupture surface typically forms a pseudotachylyte generation vein, the thickness of which increases with earthquake magnitude. The direction and sense of seismic slip cannot always be determined due to the generally complex geometry of pseudotachylyte veins. Here we show, for the first time, that the orientation of the magnetic fabric of fault pseudotachylytes indicates both direction and sense of seismic slip. The magnetic fabric, acquired in a manner similar to that of other magmas, arises in this case from the asymmetric preferred orientation of paramagnetic grains during viscous shear of the friction melt. This kinematic information, coupled with fault plane orientation and generation vein thickness, provides new and critical insight for the earthquake focal mechanism. The magnetic fabric of pseudotachylytes therefore not only constitutes a valuable kinematic criterion for these fault rocks, but also could expand our knowledge of prehistoric seismic events.
ISSN: 0091-7613

hal-01217133
https://hal.archives-ouvertes.fr/hal-01217133
DOI : 10.1130/G36587.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper aims to present an overview on the influence of rheological heterogeneity and mechanical anisotropy on the deformation of continents. After briefly recapping the concept of rheological stratification of the lithosphere, we discuss two specific issues: (1) as supported by a growing body of geophysical and geological observations, crust=mantle mechanical coupling is usually efficient, especially beneath major transcurrent faults which probably crosscut the lithosphere and root within the sublithospheric mantle; and (2) in most geodynamic environments, mechanical properties of the mantle govern the tectonic behaviour of the lithosphere. Lateral rheological heterogeneity of the continental lithosphere may result from various sources, with variations in geothermal gradient being the principal one. The oldest domains of continents, the cratonic nuclei, are characterized by a relatively cold, thick, and consequently stiff lithosphere. On the other hand, rifting may also modify the thermal structure of the lithosphere. Depending on the relative stretching of the crust and upper mantle, a stiff or a weak heterogeneity may develop. Observations from rift domains suggest that rifting usually results in a larger thinning of the lithospheric mantle than of the crust, and therefore tends to generate a weak heterogeneity. Numerical models show that during continental collision, the presence of both stiff and weak rheological heterogeneities significantly influences the large-scale deformation of the continental lithosphere. They especially favour the development of lithospheric-scale strike-slip faults, which allow strain to be transferred between the heterogeneities. An heterogeneous strain partition occurs: cratons largely escape deformation, and strain tends to localize within or at the boundary of the rift basins provided compressional deformation starts before the thermal heterogeneity induced by rifting are compensated. Seismic and electrical conductivity anisotropies consistently point towards the existence of a coherent fabric in the lithospheric mantle beneath continental domains. Analysis of naturally deformed peridotites, experimental deformations and numerical simulations suggest that this fabric is developed during orogenic events and subsequently frozen in the lithospheric mantle. Because the mechanical properties of single-crystal olivine are anisotropic, i.e. dependent on the orientation of the applied forces relative to the dominant slip systems, a pervasive fabric frozen in the mantle may induce a significant mechanical anisotropy of the whole lithospheric mantle. It is suggested that this mechanical anisotropy is the source of the so-called tectonic inheritance, i.e. the systematic reactivation of ancient tectonic directions; it may especially explain preferential rift propagation and continental break-up along pre-existing orogenic belts. Thus, the deformation of continents during orogenic events results from a trade-off between tectonic forces applied at plate boundaries, plate geometry, and the intrinsic properties (rheological heterogeneity and mechanical anisotropy) of the continental plates.
ISSN: 0040-1951

hal-01389719
http://hal.univ-reunion.fr/hal-01389719
http://hal.univ-reunion.fr/hal-01389719/document
http://hal.univ-reunion.fr/hal-01389719/file/vauchez_etal_rheology_1998_hal.pdf
DOI : 10.1016/S0040-1951(98)00137-1

Éditeur(s) : Institut de Ciències del Mar de Barcelona, CSIC
Résumé : Acoustic and core data have recently been collected on the shelf break and the upper part of the slope of the south Aquitaine continental margin. They reveal the major role played by mass-flow gravity processes in deposit erosion and redistribution, modelling of the sea-bed, and transfer of sediment toward the deep-sea. The study region is bounded in the south by the Capbreton canyon. The northern area, which shows a smooth morphology, is characterised by small-scale deformations due to sediment creep or low-amplitude slide processes. The deformations are associated with mini listric-like faults that bound packets of sediments in which the deposit geometry is typical of constructional sediment waves. These sediment waves result from the interaction of depositional and gravity deformation processes. In the southern area, closer to the canyon, wave-like structures are still present but mostly of smaller size. They only result from gravity deformation processes without any evidence of constructional processes. In the vicinity of the Capbreton canyon, the shelf break and upper slope have a much more uneven morphology with sedimentary reliefs, escarpments and depressions directed toward the canyon thalweg. The depressions look like slide scars, and could be the result of regressive slides initiated at the top of the canyon flank. The age of the sliding event responsible for the formation of the depression observed today could be middle to upper Quaternary. Since their formation, these depressions act as conduits that channel the transfer of shelf sediment into the canyon, as demonstrated by the occurrence of a meandering channel on the sea-floor of one depression.
Scientia Marina (0214-8358) (Institut de Ciències del Mar de Barcelona, CSIC), 2006-06 , Vol. 70 , N. 1 , P. 89-100

Droits : 2006 Institut de Ciències del Mar de Barcelona
http://archimer.ifremer.fr/doc/2006/publication-3960.pdf
http://archimer.ifremer.fr/doc/00000/3960/

Éditeur(s) : HAL CCSD Elsevier
Résumé : A synthesis of backscatter imagery coupled with a large 3D seismic dataset in the Lower Congo Basin (LCB) reveals a patchy distribution of features interpreted to be associated with fluid seepage from 300 m to 2500 m water depth. With the exception of one region of anomalous backscatter positive-relief mounds, all inferred seep sites occur in negative-relief pockmarks. The extensive 3D seismic dataset in the LCB offers a unique opportunity to study the plumbing system that is feeding surface cold seep systems, and in general, to reconstruct the relationship between tectonics and fluid flow in continental margins. The fluid seeps in the LCB are associated with morphologically, stratigraphically or tectonically controlled focused fluid flow. The integration of the geophysical datasets, backscatter imagery coupled to 3D seismic, clearly indicates that fluid seeps are not randomly distributed, but their seabed organization reflects 1) the location of the underlying structure (reservoir or trap) where the fluids are coming from, 2) the geometry and morphology of the reservoir/trap, and 3) the discontinuities in the sedimentary column along which fluids have migrated. In the LCB seafloor pockmarks are always associated with underlying tectonic structures (fault zones, salt diapirs, polygonal faults) or buried sedimentary bodies (turbiditic channels, erosional surfaces), whereas they never occur above sub-horizontal parallel-stratified fine-grained sediments. Even if triggering processes can not be clearly defined here, we propose a model of seafloor fluid seep organization, which represents a new tool for identifying the geometry of flow pathways and the underlying buried bodies where the fluids are originating from. This qualitative 3D model provides insight into the geohydrologic processes of continental margins.
ISSN: 0025-3227

hal-00406640
https://hal.archives-ouvertes.fr/hal-00406640
DOI : 10.1016/j.margeo.2007.06.003

Éditeur(s) : HAL CCSD
Résumé : International audience
Mylonite bodies are exhumed extensions at depth of shallow structural level brittle faults. They are characterised by intense strain localisation involving large volumes of middle to lower continental crust. The analysis of shear zone geometry and microstructures is a useful tool to decipher deformation kinematics, though finite strain estimation is still relatively qualitative. Timing of the deformation has also been the focus of numerous studies using the complete spectrum of geochronometers. However, only rare examples provide geochronological data that can be unambiguously interpreted and cooling, recrystallisation and neocrystallisation are difficult to tell from each other. Thus, time-scales over which major mylonite zones develop and remain active under ductile conditions as well as their strain rate often remain poorly documented. We investigated two sections across the South-Armorican Shear Zone (SASZ), a crustal-scale pluri-km thick dextral shear zone active during a single tectonic event of late-Variscan age and associated with syntectonic granite emplacement.. Finite strain profiles on these cross-sections, quantified from average Quartz grain-size in 34 samples, show a strong deformation partitioning towards the center of the SASZ, with a decrease, for each section, from 150µm in slightly deformed zones to less than 7-5 µm in the core of the ultramylonite. Furthermore, toward the core of the SASZ, development of a penetrative shear band network progressively eliminates lenses of less deformed rocks and results in homogenisation of the Quartz grain sizes. In parallel, we performed in-situ UV-laser Ar/Ar dating on the fabric-forming white micas. White micas population can be decomposed into inherited muscovites carried by the folation and newly-formed, syn-tectonic substituted phengites located along the shear bands yielding 2 age groups for each sample. Along the profiles, the difference between these two ages evolves from 10-15 Ma in weakly deformed domains to zero toward the SASZ core. In addition, mylonite-forming phengites yielded the same age irrespectively of their position on the section or of the rock strain.. On the regional point of view, this study brings deformation-ages for the late-orogenic evolution of the South Armorican domain. Strain accumulated along the SASZ in a time-span extending to 300-298 Ma, i.e. contemporaneously with the activity of nearby major extensional shear zones. These results support a new model of crustal-scale shear zone activity, where the whole body of the shear zone is active throughout its history (defined as the largest age difference through the section), i.e. the actively deforming zone does not get progressively narrower. The strain distribution nevertheless evolves with time, with an increasingly large fraction partitioned in the ultramylonitic core.
EGU General Assembly
Vienne, Austria

insu-00839320
https://hal-insu.archives-ouvertes.fr/insu-00839320
BIBCODE : 2010EGUGA..12.9881A

Éditeur(s) : Elsevier
Résumé : We present results from multibeam bathymetric data acquired during 2005 and 2006, in the region of maximum slip of the 26 Dec. 2004 earthquake (Mw 9.2). These data provide high-resolution images of seafloor morphology of the entire NW Sumatra forearc from the Sunda trench to the submarine volcanic arc just north of Sumatra. A slope gradient analysis of the combined dataset accurately highlights those portions of the seafloor shaped by active tectonic, depositional and/or erosional processes. The greatest slope gradients are located in the frontal 30 km of the forearc, at the toe of the accretionary wedge. This suggests that long-term deformation rates are highest here and that probably only minor amounts of slip are accommodated by other thrust faults further landward. Obvious N-S oriented lineaments observed on the incoming oceanic plate are aligned sub-parallel to the fracture zones associated with the Wharton fossil spreading center. Active strike-slip motion is suggested by recent deformation with up to 20-30 m of vertical offset. The intersection of these N-S elongated bathymetric scarps with the accretionary wedge partly controls the geometry of thrust anticlines and the location of erosional features (e.g. slide scars, canyons) at the wedge toe. Our interpretation suggests that these N-S lineaments have a significant impact on the oceanic plate, the toe of the wedge and further landward in the wedge. Finally, the bathymetric data indicate that folding at the front of the accretionary wedge occurs primarily along landward-vergent (seaward-dipping) thrusts, all unusual style in accretionary wedges worldwide. The N-S elongated lineaments locally act as boundaries between zones with predominant seaward versus landward vergence.
Earth and Planetary Science Letters (0012-821X) (Elsevier), 2008-11 , Vol. 275 , N. 3-4 , P. 201-210

Droits : 2008 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2008/publication-5166.pdf
DOI:10.1016/j.epsl.2008.04.053
http://archimer.ifremer.fr/doc/00000/5166/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Previous estimates of the geodetic and geologic slip rates of the 1500 km long Altyn Tagh fault bordering the northern edge of the Tibetan plateau vary by a factor of five. Proposed reasons for these discrepancies include poor GPS geometry, interpretative errors in terrace morphology, and changes in fault slip rate over time. Here we present results from a new dense GPS array orthogonal to the fault at ~86.2°E that indicates a velocity of 9.0−3.2/+4.4 mm/yr, in close agreement with geomorphologic estimates at the same location. Our estimated geodetic slip rate is consistent with recent geological slip rates based on terrace offsets. The resulting mean combined geological and geodetic slip rate (9.0 ± 4.0 mm/yr) is remarkably uniform for the central ~800 km of the Altyn Tagh fault, significantly lower than early kinematic estimates and consistent with deformation elsewhere in Tibet and central Asia.
ISSN: 0094-8276

hal-00963568
https://hal.archives-ouvertes.fr/hal-00963568
DOI : 10.1002/2013GL057497

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Four decades after their introduction, the validity of fault slip inversion methods based on Wallace (1951) and Bott (1959) hypothesis, which states that the slip on each fault surface has the same direction and sense as the maximum resolved shear stress, is still a subject of debate. According to some authors, this hypothesis is questionable since fault mechanical interactions induce slip reorientations as confirmed by geomechanical models. This leads us to ask as to what extent the Wallace-Bott simplifications are reliable as a basis hypothesis for stress inversion from fault slip data. In this paper, we compare two inversion methods; the first is based on the Wallace-Bott hypothesis, and the second relies on geomechanics and mechanical effects on fault heterogeneous slip distribution. In that context, a multi-parametric stress inversion study covering (i) the friction coefficients (μ), (ii) the full range of Andersonian state of stress and (iii) slip data sampling along the faults is performed. For each tested parameter, the results of the mechanical stress inversion and the Wallace-Bott (WB) based stress inversion for slip are compared in order to understand their respective effects. The predicted discrepancy between the solutions of both stress inversion methods (based on WB and mechanics) will then be used to explain the stress inversions results for the chimney Rock case study. It is shown that a high solution discrepancy is not always correlated with the misfit angle (ω ) and can be found under specific configurations (View the MathML sourceR−, θ, μ, geometry) invalidating the WB solutions. We conclude that in most cases the mechanical stress inversion and the WB based stress inversion are both valid and complementary depending on the fault friction. Some exceptions (i.e. low fault friction, simple fault geometry and pure regimes) that may lead to wrong WB based stress inversion solutions are highlighted.
ISSN: 0040-1951

hal-01467165
https://hal.archives-ouvertes.fr/hal-01467165
DOI : 10.1016/j.tecto.2016.11.039

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : Geophysical Journal International, v. 173, n. 2, p. 473-482, 2008. http://dx.doi.org/10.1111/j.1365-246X.2008.03718.x
International audience
The western Provence in southern France is an intraplate low deforming region, cut by large sinistral strike-slip faults as the Nîmes Fault. The deformation rate of this fault was estimated at 0.1 mm yr−1 from geological and morphological observations. Nevertheless, some large earthquakes occurred in this area in historical times inducing well-documented partial destructions on the roman monument 'Pont-du-Gard'. In order to investigate if this area is seismically active, we installed a temporary seismological network of 14 stations between the cities of Nîmes and Avignon for a 1-yr period (2002 July–2003 June). We recorded and located a total amount of 80 earthquakes of magnitude Ml smaller than 2.8, and of 153 quarry blasts. The seismic event locations are interpreted in terms of regional tectonics as well as of geometry at depth of the Nîmes Fault and of possible seismic activity of the Roquemaure Fault. At the beginning of 2002 September, a catastrophic storm occurred in the same area with cumulated precipitations at 600 mm in 28 hr, causing casualties and major inundations and damages. We identified a clear and sudden increase of the seismic activity as an immediate consequence of this exceptional meteorological phenomenon. We interpret this rainfall triggering of earthquakes as the response of the crust to an abrupt vertical loading. The geological context of this zone is characterized by the presence of sedimentary basins and of an important karstic network in a calcareous environment allowing the retention of a third of the total rainwater volume during few weeks after the catastrophic storm. Month by month inversion of the seismic wave velocities for only the first 1-km thick layer of the crust allows investigating the influence of the stored water. A clear decrease of both P- and S-velocities, and an increase of the Vp/Vs ratio are evidenced. The variations obtained are at 2, 6 and 4.5 per cent for P-, S-velocities and Vp/Vs ratio, respectively. These variations are discussed in confront of previous studies and can be directly related to the known water volume.
ISSN: 0956-540X

hal-00407884
https://hal.archives-ouvertes.fr/hal-00407884
https://hal.archives-ouvertes.fr/hal-00407884v2/document
https://hal.archives-ouvertes.fr/hal-00407884/file/rigoGJI2008.pdf
DOI : 10.1111/j.1365-246X.2008.03718.x

Éditeur(s) : HAL CCSD
Résumé : International audience
The Corinth Rift is the most seismically active zone in Europe. Since the year 2000, the Corinth Rift Laboratory (CRL, http://crlab.eu) consisting in a multidisciplinary natural observatory, aims at understanding the mechanics of faulting and earthquake nucleation in the Rift. Recent studies have improved our view about fault geometry and mechanics within CRL but there is still a critical need for a better knowledge of the structure at depth.In this project, we aim to analyze the complete seismological database (13 years of recordings) of CRL by using recently developed methodologies of structural imaging in order to determine, with high resolution, the local 3D structure and the earthquake locations. We perform an iterative joint determination of 3D velocity model and earthquake coordinates. P and S velocity models are estimated through a first arrival traveltime tomography by using the adjoint state method proposed by Taillandier et al. (2009). It consists in the minimization of the cost function between observed and theoretical arrival times,which is achieved by estimating the gradient of the cost function. Earthquake locations are also estimated with a linearized inversion approach by computing the gradient of the misfit function. Iterations are repeated until the cost function no longer decreases. We present preliminary results consisting in: (1) the adjustment of a 1D velocity model that is used as initial model of the 3D tomography and (2) a first attempt of the joint determination of 3D velocity model and earthquake locations.We also perform a preliminary receiver function analysis of teleseismic data recorded by the broadband stations of the CRL network. The multiscale approach (Gesret et. al., 2010) analysis of teleseismic P to S converted waves allows to analyze the signal toward the higher frequencies and thus to characterize the structure at depth with a high resolution. Our multiscale approach should give us reliable depth of interfaces beneath seismometers in the CRL area. In this first attempt, we adjust the 1D velocity model that produces a synthetic RF as similar as possible to the stack of observed RF for a subset of data. The identified interfaces could then be compared with heterogeneities imaged by the tomography.
AGU Fall Meeting
San Fransico, United States

hal-01417184
https://hal-mines-paristech.archives-ouvertes.fr/hal-01417184

Éditeur(s) : HAL CCSD
Résumé : International audience
Aegean extension is a process driven by slab rollback that, since 45 Ma, shows a twostage evolution. From Middle Eocene to Middle Miocene it is accommodated by localized deformation leading to i) the exhumation of high-pressure metamorphic rocks from mantle to crustal depths, ii) the exhumation of high-temperature rocks in core complexes and iii) the deposition of Paleogene sedimentary basins. Since Middle Miocene, extension is distributed over the whole Aegean domain giving a widespread development of onshore and offshore Neogene sedimentary basins. We reconstructed this two-stage evolution in 3D at Aegean scale by using available ages of metamorphic and sedimentary processes, geometry and kinematics of ductile deformation, paleomagnetic data and available tomographic models. The restorationmodel shows that the rate of trench retreat was around 0.6 cm/y during the first 30 My and then accelerated up to 3.2 cm/y during the last 15 My. The sharp transition observed in the mode of extension, localized versus distributed, which occurred in Middle Miocene correlates with the acceleration of trench retreat and is more likely a consequence of the Hellenic slab tearing documented by mantle tomography. The development of large dextral NE-SW strike-slip faults during the second stage of Aegean extension, since Middle Miocene, is illustrated by the 450 Km-long fault, recently put in evidence, offshore from Myrthes to Ikaria and onshore from Izmir to Balikeshir, in western Anatolia. Therefore, the interaction between the Hellenic trench retreat and the westward displacement of Anatolia started in Middle Miocene,almost 10 Ma before the propagation of the North Anatolian Fault in the North Aegean. This raises a fundamental issue concerning the dynamic relationship between slab tearing and Anatolia displacement
ISSN: 0438-9557

insu-01574659
https://hal-insu.archives-ouvertes.fr/insu-01574659
https://hal-insu.archives-ouvertes.fr/insu-01574659/document
https://hal-insu.archives-ouvertes.fr/insu-01574659/file/EFFECTS_OF_SLAB_ROLLBACK_ACCELERATION_ON_AEGEAN_EX.pdf
DOI : 10.12681/bgsg.11697

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We analyze the kinematics of fault tip folding at the front of a fold-and-thrust wedge using a sandbox experiment. The analog model consists of sand layers intercalated with low-friction glass bead layers, deposited in a glass-sided experimental device and with a total thickness h = 4.8 cm. A computerized mobile backstop induces progressive horizontal shortening of the sand layers and therefore thrust fault propagation. Active deformation at the tip of the forward propagating basal décollement is monitored along the cross section with a high-resolution CCD camera, and the displacement field between pairs of images is measured from the optical flow technique. In the early stage, when cumulative shortening is less than about h/10, slip along the décollement tapers gradually to zero and the displacement gradient is absorbed by distributed deformation of the overlying medium. In this stage of detachment tip folding, horizontal displacements decrease linearly with distance toward the foreland. Vertical displacements reflect a nearly symmetrical mode of folding, with displacements varying linearly between relatively well defined axial surfaces. When the cumulative slip on the décollement exceeds about h/10, deformation tends to localize on a few discrete shear bands at the front of the system, until shortening exceeds h/8 and deformation gets fully localized on a single emergent frontal ramp. The fault geometry subsequently evolves to a sigmoid shape and the hanging wall deforms by simple shear as it overthrusts the flat ramp system. As long as strain localization is not fully established, the sand layers experience a combination of thickening and horizontal shortening, which induces gradual limb rotation. The observed kinematics can be reduced to simple analytical expressions that can be used to restore fault tip folds, relate finite deformation to incremental folding, and derive shortening rates from deformed geomorphic markers or growth strata.
ISSN: 2169-9313

hal-00138061
https://hal.archives-ouvertes.fr/hal-00138061
https://hal.archives-ouvertes.fr/hal-00138061/document
https://hal.archives-ouvertes.fr/hal-00138061/file/Bernard_et_al-2007-Journalsur Geophysical_Research__Solid_Earth_%281978-2012%29.pdf
DOI : 10.1029/2005JB004149

Éditeur(s) : Elsevier Sci Ltd
Résumé : The eastern Demerara Plateau offshore French Guiana was surveyed in 2003 during the GUYAPLAC cruise (multibeam bathymetry and acoustic imagery, 6-channel seismic reflection and 3.5 kHz echo-sounding). The data show the "post-transform" Cenozoic that the series located on the outer part of the plateau (below c. 2000 m) contain at least twelve stacked mass transport deposits (MTDs) that have recorded a history of large-scale slope failure, as well as two main normal fault sets that provide possible pathways for upward fluid migration through the series, reaching at high as the uppermost MTDs. Seabed data show that the area above the failures is characterized by circular-to-elongate (slope-parallel) depressions interpreted as fluid seeps (pockmarks), some of them have been modified by along slope currents. We suggest that the development of the MTDs to results from the combinaiton of the presence of fluid overpressure at depth the geometry of the margin's deep structure, in particular the existence of a 'free borderlateral border' on the outermost plateau. Our results also emphasise the role of stratigraphic decollements within the Cenozoic series.
Marine And Petroleum Geology (0264-8172) (Elsevier Sci Ltd), 2013-09 , Vol. 46 , P. 287-303

Droits : 2013 Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00157/26850/25316.pdf
DOI:10.1016/j.marpetgeo.2013.06.010
http://archimer.ifremer.fr/doc/00157/26850/

Éditeur(s) : HAL CCSD
Résumé : International audience
The « METYSS » cruise was carried out in June 2009 onboard the R/V « Téthys II » along the eastern Sardinian and south-eastern Corsican margins, western Tyrrhenian Sea, in order to better constrain the potential links between deformation related to either crustal tectonics or salt tectonics and sediment accumulation, especially during the Messinian and Plio-Quaternary times. We acquired 15 high-resolution seismic reflection profiles (about 1200 km in cumulative length) along the south-eastern Corsican margin, immediately north of the Bonifacio Strait and along the upper and middle parts of the eastern Sardinian margin, from the continental slope to the Cornaglia Terrace. The Tyrrhenian Sea is considered as a Neogene back-arc basin that opened during continental rifting and oceanic spreading related to the eastward migration of the Apennine subduction system from Tortonian to Pliocene times (Jolivet et al., 2006). Rifting of the Tyrrhenian Sea started first along the Eastern Sardinian margin during the Tortonian-Messinian times and therefore the series of that age should be considered as syn-rift sediments (Sartori et al., 2004). The « METYSS » seismic profiles clearly illustrate that this part of the Tyrrhenian was highly segmented during the rifting stage by N-S trending normal faults delineating ridges (e.g., Baronie Ridge) and basins (e.g., Sardinian Basin and Cornaglia Terrace), as previously described for example by Thommeret (1999) and Sartori et al. (2004). The Messinian sedimentary units and especially the « Upper Unit » (UU, Lofi et al., this congress, corresponding to the « Upper Evaporites » in the previous literature) are, without any doubt, of syn-rift age, as they display a fan-shaped stratal geometry. The Mobile Unit (MU, Lofi et al., this congress), i.e. the Messinian halite, is clearly imaged in the study area and its spatial repartition can be outlined. The highly-variable thickness of the confined salt basins could be due to the initial basin geometry (i.e. before the Messinian salinity Crisis) or to the syn-rift character of the deposition. Southeastward of the study area, in the vicinity of the Cornaglia Seamount, salt tectonics appears surprisingly vigorous. More surprisingly, several normal faults seem to have remained active in recent times, if not even at present time. Fault slip has been recorded by bathymetric scarps and associated footwall debris flows interfingered within the Plio-Quaternary sequence, even though the eastern Sardinian margin is usually considered to be passive now. Moreover, some amount of tectonic inversion is visible on some normal faults that show contractional or transpressional components of late slip. In addition, this “post-rift” deformation can be illustrated within the Plio-Quaternary sequence by a regional unconformity. Consequently, numerous mass-transport deposits and channel-levees systems observed in the Plio-Quaternary cover could be partly controlled by tectonic activity. These very preliminary results require further investigations in order to better decipher the role of crustal tectonics and salt tectonics, salt-related structures being very efficient markers to discriminate between the respective contribution of gravity-driven, salt tectonics and deep-seated, crustal tectonics (Gaullier et al., 2010). Finally, we aim to precisely determine the relative vertical movements (tilting, subsidence, magmatism. . . ) and geodynamical history of the different segments of the area since 6 Ma.
Geophysical Research Abstracts
Vienne, Austria

hal-00537828
https://hal-brgm.archives-ouvertes.fr/hal-00537828
https://hal-brgm.archives-ouvertes.fr/hal-00537828/document
https://hal-brgm.archives-ouvertes.fr/hal-00537828/file/EGU2010-15469_ref6821.pdf

Éditeur(s) : HAL CCSD National Research Council Canada
Résumé : International audience
Back-arc extension in the Aegean, which was driven by slab rollback since 45 Ma, is described here for the first time in two stages. From Middle Eocene to Middle Miocene, deformation was localized leading to i) the exhumation of high-pressure metamorphic rocks to crustal depths, ii) the exhumation of high-temperature metamorphic rocks in core complexes and iii) the deposition of sedimentary basins. Since Middle Miocene, extension distributed over the whole Aegean domain controlled the deposition of onshore and offshore Neogene sedimentary basins. We reconstructed this two-stage evolution in 3D and four steps at Aegean scale by using available ages of metamorphic and sedimentary processes, geometry and kinematics of ductile deformation, paleomagnetic data and available tomographic models. The restoration model shows that the rate of trench retreat was around 0.6 cm/y during the first 30 My and then accelerated up to 3.2 cm/y during the last 15 My. The sharp transition observed in the mode of extension, localized versus distributed, in Middle Miocene correlates with the acceleration of trench retreat and is likely a consequence of the Hellenic slab tearing documented by mantle tomography. The development of large dextral NE-SW strike-slip faults, since Middle Miocene, is illustrated by the 450 Km-long fault zone, offshore from Myrthes to Ikaria and onshore from Izmir to Balikeshir, in western Anatolia. Therefore, the interaction between the Hellenic trench retreat and the westward displacement of Anatolia started in Middle Miocene, almost 10 Ma before the propagation of the North Anatolian Fault in the North Aegean.
ISSN: 0008-4077

insu-01271296
https://hal-insu.archives-ouvertes.fr/insu-01271296
https://hal-insu.archives-ouvertes.fr/insu-01271296/document
https://hal-insu.archives-ouvertes.fr/insu-01271296/file/Brun%20etal%20CJES%202016.pdf
DOI : 10.1139/cjes-2015-0203

Éditeur(s) : HAL CCSD
Résumé : International audience
In many geological reservoirs, open fractures or fault zones generally induce high spatial variability of hydrodynamical properties and shape the main deep-seated flow paths. It is of crucial interest to determine their structure and properties in order to achieve a sound and sustained exploitation of resources or to estimate the risk of failure of any underground storage. Tiltmeters have emerged as new tools to observe deformation generated by groundwater flow. As such instruments are highly sensitive to pressure gradients, they are perfectly suited for monitoring channelized flow in connected fractures and fault zones. Hence, they provide a unique insight of these reservoirs' geometry and dynamics over broad time scales. Here we demonstrate that continuous tilt data from surface long baseline tiltmeters (LBT) can be used alone to evaluate the general functioning of a fractured hardrock system and estimate the hydraulic properties of its main conductive features. The study is applied to the pumping site of Ploemeur observatory (Brittany, France) which is well documented and instrumented, and therefore forms a convenient setting for introducing LBT as tools for fractured media hydrology. On the short term, tilt signals are strongly correlated with pumping cycles and associated head level changes in well-connected boreholes. Besides, when pumps are stopped the maximal tilt direction is systematically perpendicular to a subvertical fault zone whose azimuth of strike has thereby been refined down to degree precision. By using a semi-analytical model of deformation, we establish the link between tilt and pressure change during pumping interruptions which then allows for hydraulic properties estimation from tilt measurements only. Finally, we validate our results with previous estimates obtained from other studies and discuss the orientation of future work that could enhance these estimates.
AGU Fall Meeting 2014
San Francisco, United States

insu-01093437
https://hal-insu.archives-ouvertes.fr/insu-01093437

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The brittle structures of a Hercynian granite (La Borne, French Massif Central) observed at several scales, from regional to microscopic, are presented and interpreted on mechanical terms. Emphasis is placed on strike slip faults, joints, and cracks related to incipient shear fracturing during horizontal compression. Three compressive tectonic phases have been identified according to their brittle structures and characterised by the burial depth at the time of their generation.The two first phases (H1, H2) are Hercynian and occurred while the granite was deeply buried (∼5 to 3 km depth) whereas the last phase (P) is Pyrenean and occurred at very low depth. The geometric organizations of cracks, joints and faults are clearly similar at various scales from about 10 μm to several m.These field observations are strong arguments for the occurrence of shear structures at microscopic to macroscopic scales during tectonic events. Following this inference, it is proposed that, at least in the case of Hercynian phases, cracks, joints and macroscopic strike slip faults have been generated by the same mechanical process under high overburden weight. Therefore, incipient fractures seem to be generated as shearing structures and to evolve by coalescence with neighbouring ones with the same direction.
ISSN: 0191-8141

hal-01115718
https://hal.archives-ouvertes.fr/hal-01115718
DOI : 10.1016/j.jsg.2014.05.002