Éditeur(s) : HAL CCSD
Résumé : Today, one of the main challenges in the oil industry is the exploitation of new resources in naturally fractured reservoirs often located in structurally complex areas such as plate boundaries, mountain ranges or near salt structures. While numerical models of rock deformation based on continuum mechanics are becoming industry standard in providing efficient means for modelling natural fractures in reservoirs, the knowledge of past perturbed stress fields, which is referred as the type (normal, wrench or reverse), orientation and magnitude of the regional or local tectonic stresses that needs to be applied as boundary condition in numerical simulations, is often unknown or approximated.The essence of this thesis is to improve the recovery of the paleostress field needed to constrain numerical simulations. I first described and discuss through a comprehensive mechanically-based multi-parametric study how far we can rely on the commonly used paleostress inversion methods based on fault slip data and the Wallace and Bott assumptions. I then compared this method with a new generation technique based on geomechanics using field observations. Since slip markers on faults are hardly observed in core or image log, I used observed natural fracture data as main drivers for the inversion of the paleostress using geomechanically-based method. I demonstrated, through various outcrop and subsurface examples, how this can efficiently be done. Finally, I aimed at addressing the problem of polyphase fracture data sets with unknown mechanical type (joints, faults, stylolites ...) and expanded the mechanical stress inversion to the separation of tectonic phases.
Aujourd'hui, l'un des principaux défis dans l'industrie pétrolière est l'exploitation de nouvelles ressources dans les réservoirs naturellement fracturés souvent situés dans des zones structurellement complexes tels que les frontières de plaques, les chaînes de montagnes ou les structures de proches des dômes de sel. Alors que les modèles numériques de déformation des roches basée sur la mécanique des milieux continus fournissant des moyens efficaces pour la modélisation de fractures naturelles dans les réservoirs, sont devenus la norme dans l'industrie, les paléo-contraintes régionales ou locales appliquées comme condition aux limites dans les simulations numériques, définies par le régime (normal, décrochant ou inverse), l'orientation, et la magnitude des contraintes tectoniques, sont souvent inconnues ou approximées.L'essence de cette thèse est d'améliorer la prédiction du champ de paléo-contrainte nécessaire pour contraindre les simulations numériques. J’ai décrit dans un premier temps à travers une étude comparative multi-paramétrique complète basée sur la mécanique, dans quelle mesure nous pouvions compter sur les méthodes d'inversion des paléo-contraintes basées sur les hypothèses de Wallace et Bott et les données de glissement sur les failles. J’ai ensuite comparé ces méthodes avec une technique d’inversion de nouvelle génération basée sur la géomécanique en utilisant les observations de terrain. Puisque les marqueurs de glissement sur les failles sont rarement observés le long du forage, j’ai utilisé l’inversion géomécanique des contraintes pour les données de fractures naturelles observées. J’ai alors démontré, l’efficacité de cette technique à travers divers exemples d'affleurements et de subsurface. Enfin, j’ai proposé une solution afin de résoudre le problème des données de fractures polyphasées à type cinématique inconnu (joints, failles, stylolites ...) et étendu l’inversion de contrainte basée sur la géomécanique à la séparation des phases tectoniques.
https://hal.archives-ouvertes.fr/tel-01324110

tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110/document
https://hal.archives-ouvertes.fr/tel-01324110/file/theselejri.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Karukéra spur is an easternmost submerged rise of the Lesser Antilles fore-arc in the Guadeloupe archipelago, culminating about 4000 m above the fore-arc basin 150 km west of the deformation front. The analysis of 3500 km 2D high-resolution multichannel seismic reflection and multibeam bathymetric data, and the study of 14 core samples, allow for the first time to reconstruct its sedimentary anatomy and tectonic evolution. Seven seismic units (US1 to US7) are evidenced, organised into four major depositional sequences separated by erosional surfaces. Units US1 to US4 thicken to the south-southeast on the spur. The sedimentary deposits rest upon a deeply eroded metamorphic basement of the Caribbean Plate as in La Désirade Island. Sequence 1 (units US1 and US2) remains unknown in its lower part because it does not outcrop. Its upper part comprises early Miocene shallow water carbonates. Sequence S2 (Unit US3) only comprises an upper Miocene transgressive systems tract deposited into basinal environment. It is bounded by major erosional surfaces SB2 and SB3. Sequence 3 (US4 to US6) is Zanclean to Pleistocene. It is dominantly composed of shallow water, reefal deposits. Sequence 4 corresponds to recent deposits. The Karukéra spur experienced three main extensional episodes with alternations between uplift and subsidence periods. Uplifts are responsible for emersions and erosions. Subsidence severely drowned shallow water deposits. The first extensional episode led to the formation of horsts and grabens in the basement, prior to early Miocene deposits. The second extensional episode occurred during upper Miocene, in accordance with data in surrounding islands. The third tectonic episode developed since Calabrian. Noticeable is the constant reactivation of N130°–N150°, N150°–N180° and N40° trending faults since early Miocene and the neoformation of E–W trending faults since Calabrian. Our results suggest that at the latitude of Guadeloupean archipelago the Lesser Antilles subduction zone is an erosional margin because of the successive sweepings of the Santa Lucia then Tiburon Ridges.
ISSN: 0025-3227

hal-01172231
https://hal.archives-ouvertes.fr/hal-01172231
DOI : 10.1016/j.margeo.2015.02.007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the framework of the Africa-Europe convergence, the Mediterranean system presents a complex interaction between subduction rollback and upper-plate deformation during the Tertiary. The western end of the system shows a narrow arcuate geometry across the Gibraltar arc, the Betic-Rif belt, in which the relationship between slab dynamics and surface tectonics is not well understood. The present study focuses on the Western Betics, which is characterized by two major thrusts: 1/ the Internal/External Zone Boundary limits the metamorphic domain (Alboran Domain) from the fold-and-thrust belts in the External Zone; 2/ the Ronda Peridotites Thrust allows the juxtaposition of a strongly attenuated lithosphere section with large bodies of sub-continental mantle rocks on top of upper crustal rocks. New structural data show that two major E-W strike-slip corridors played a major role in the deformation pattern of the Alboran Domain, in which E-W dextral strike-slip faults, N60 thrusts and N140 normal faults developed simultaneously during dextral strike-slip simple shear. Olistostromic sediments of Lower Miocene age were deposited and deformed in this tectonic context and hence provide an age estimate for the inferred continuous westward translation of the Alboran Domain that is accommodated by an E-W lateral (strike-slip) ramp and a N60 frontal thrust. The crustal emplacement of large bodies of sub-continental mantle may occur at the onset of this westward thrusting in the Western Alboran domain. At lithosphere-scale, we interpret the observed deformation pattern as the subduction upper-plate expression of a lateral slab tear and its westward propagation since Lower Miocene.
ISSN: 0040-1951

insu-01163695
https://hal-insu.archives-ouvertes.fr/insu-01163695
https://hal-insu.archives-ouvertes.fr/insu-01163695/document
https://hal-insu.archives-ouvertes.fr/insu-01163695/file/Frasca-2015.pdf
DOI : 10.1016/j.tecto.2015.05.017

Éditeur(s) : HAL CCSD
Résumé : 38 pages
Rapport
The Chicxulub impact crater, México, is unique. It is the only known terrestrial impact structure that has been directly linked to a mass extinction event and the only terrestrial impact with a global ejecta layer. Of the three largest impact structures on Earth, Chicxulub is the best preserved. Chicxulub is also the only known terrestrial impact structure with an intact, unequivocal topographic peak ring. Chicxulub’s role in the Cretaceous/Paleogene (K-Pg) mass extinction and its exceptional state of preservation make it an important natural laboratory for the study of both large impact crater formation on Earth and other planets and the effects of large impacts on the Earth’s environment and ecology. Our understanding of the impact process is far from complete, and despite more than 30 years of intense debate, we are still striving to answer the question as to why this impact was so catastrophic.During International Ocean Discovery Program (IODP) Expedition 364, Paleogene sediments and lithologies that make up the Chicxulub peak ring were cored to investigate (1) the nature and formational mechanism of peak rings, (2) how rocks are weakened during large impacts, (3) the nature and extent of post-impact hydrothermal circulation, (4) the deep biosphere and habitability of the peak ring, and (5) the recovery of life in a sterile zone. Other key targets included sampling the transition through a rare midlatitude section that might include Eocene and Paleocene hyperthermals and/or the Paleocene/Eocene Thermal Maximum (PETM); the composition and character of the impact breccias, melt rocks, and peak-ring rocks; the sedimentology and stratigraphy of the Paleocene–Eocene Chicxulub impact basin infill; the chronology of the peak-ring rocks; and any observations from the core that may help us constrain the volume of dust and climatically active gases released into the stratosphere by this impact. Petrophysical property measurements on the core and wireline logs acquired during Expedition 364 will be used to calibrate geophysical models, including seismic reflection and potential field data, and the integration of all the data will calibrate impact crater models for crater formation and environmental effects. The proposed drilling directly contributes to IODP Science Plan goals:Climate and Ocean Change: How resilient is the ocean to chemical perturbations? The Chicxulub impact represents an external forcing event that caused a 75% level mass extinction. The impact basin may also record key hyperthermals within the Paleogene.Biosphere Frontiers: What are the origin, composition, and global significance of subseafloor communities? What are the limits of life in the subseafloor? How sensitive are ecosystems and biodiversity to environmental change? Impact craters can create habitats for subsurface life, and Chicxulub may provide information on potential habitats for life, including extremophiles, on the early Earth and other planetary bodies. Paleontological and geochemical studies at ground zero will document how large impacts affect ecosystems and effects on biodiversity.Earth Connections/Earth in Motion: What are the composition, structure and dynamics of Earth’s upper mantle? What mechanisms control the occurrence of destructive earthquakes, landslides, and tsunami? Mantle uplift in response to impacts provides insight into dynamics that differ between Earth and other rocky planets. Impacts generate earthquakes, landslides, and tsunami, and scales that generally exceed plate tectonic processes yield insight into effects, the geologic record, and potential hazards.IODP Expedition 364 was a Mission Specific Platform expedition to obtain subseabed samples and downhole logging measurements from the sedimentary cover sequence and peak ring of the Chicxulub impact crater. A single borehole was drilled into the Chicxulub impact crater on the Yucatán continental shelf, recovering core from 505.7 to 1334.73 m below seafloor with ~99% core recovery and acquiring downhole logs for the entire depth.
International Ocean Discovery Program

hal-01639520
https://hal.archives-ouvertes.fr/hal-01639520
DOI : 10.14379/iodp.pr.364.2017

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Sandbox experiments, using a two-dimensional and a three-dimensional approach, are used to study the deformation of margins in response to seamount subduction. Successive mechanisms of deformation are activated during the subduction of conical seamounts. First, reactivation of the frontal thrusts and compaction of the accretionary wedge is observed. Then, back thrusting and, conjugate strike-slip faulting develops above the leading slope of the subducted seamount. The basal d6collement is deflected upward in the wake of the subducting high, and a large shadow zone develops behind the seamount trailing slope. Consequently, frontal accretion is inhibited and part of the frontal margin is dragged into the subduction zone. When the main d6collement returns to its basal level in the wake of the seamount, the margin records a rapid subsidence and a new accretionary wedge develops, closing the margin reentrant. The sediments underthrusted in the wake of the seamount into the shadow zone, are underplated beneath the rear part of the accretionary wedge. Substantial shortening and thickening of the deformable seaward termination of the upper plate basement, associated with basal erosion is observed. Seamount subduction induces significant material transfer within the accretionary wedge, favors large tectonic erosion of the frontal margin and thickening of the rear part of the margin. The subduction and underplating of relatively undeformed, water-ladden sediments, associated with fluid expulsion along the fractures affecting the margin could modify the fluid pressure along the basal ddcollement. Consequently, significant variations of the effective basal friction and local mechanical coupling between the two plates could be expected around the subducting seamount.
ISSN: 0278-7407

hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523/document
https://hal.archives-ouvertes.fr/hal-01261523/file/Dominguez2000-Tectonics.pdf
DOI : 10.1029/1999TC900055

Éditeur(s) : Institut Francais du Pétrole
Résumé : The study of the rock and sediment dredgings carried out on the Armorican margin between 47 and 48° latitude North enables us to precise this latter's paleogeographical and tectonic evolution and to integrate it to the Bay of Biscay's. The microfacies analysis of the rock samples dating back from the Upper Jurassic to the Neogene era demonstrates: - on the one hand, the belonging of the northern edge of the Armorican margin to the Mesogean domain, at least up to the Mid-Cretaceous period; - on the other hand, the persistence of a carbonated platform regime which seems to operate from the Tithonian to the lower Tertiary phase, and on which reef could grow, especially in the Mid-Cretaceous period. Over the whole period, sedimentation compensated for subsidence; - lastly, the increase of subsidence from the Eocene period (accompanied with a decrease in the calcium production?) which is most probably related to the major tectonic phenomena that affected the southern edge of the European plate at that time.
L'étude des dragages de roches et de sédiments effectués sur la marge armoricaine entre 47 et 48° de latitude Nord permet d'en préciser l'évolution paléogéographique et tectonique et de l'intégrer à celle du golfe de Gascogne. L'andyse de microfaciès des échantillons rocheux dont l'âge varie du Jurassique supérieur au Néogène met en évidence : - d'une part, l'appartenance de la bordure nord de la marge armoricaine au domaine mésogéen au moins jusqu'au Crétacé moyen ; - d'autre part, la permanence d'un régime de plate-forme carbonatée qui paraît fonctionner du Tithonique au Tertiaire inférieur, sur laquelle ont pu s'installer des édifices récifaux notamment au Crétacé moyen. Pendant toute cette période la sédimentation a compensé la subsidence ; - enfin, l'accentuation de la subsidence à partir de l'Éocène (accompagnée d'une diminution de la production de calcium ?) qui est vraisemblablement en relation avec les phénomènes tectoniques majeurs qui ont affecté à ce moment la bordure sud de la plaque européenne. [OCR NON CONTRÔLE]
Revue de l'Institut Francais du Pétrole (Institut Francais du Pétrole), 1976-06 , Vol. 31 , N. 3 , P. 401-425

Droits : Institut Francais du Pétrole
http://archimer.ifremer.fr/doc/1976/publication-5100.pdf
http://archimer.ifremer.fr/doc/00000/5100/

Éditeur(s) : HAL CCSD
Résumé : International audience
The Transbaikal region extends over several hundreds of kilometres east of the Baikal Rift System. It is characterized by a number of sub-parallel Mesozoic grabens or half grabens generally filled with late Jurassic to Early Cretaceous clastic sediments interbedded with coal layers (1). Similar basins occur on an even larger area spanning from the Transbaikal region down to Korea implying a large-scale extensional process affecting most of the Amuria plate during the Mesozoic. In the Transbaikal region, the normal faults controlling the edges of the Mesozoic basins are generally superimposed to Palaeozoic ductile shear zones implying a strong localisation of the extensional deformation on inherited structures. Recent studies, associated to our own fieldwork demonstrated that some of the faults were again activated (2), still as extensional faults, during the Tertiary or Quaternary, and that some of them are presently active. The closure of the Mongol-Okhotsk ocean separating the Siberian plate from the Amurian block during the Mesozoic corresponds to a major event in the growth process of the East Asian continent. The oceanic suture zone is situated on the southern edge of the Transbaikal region and its roughly SW-NE direction is parallel to the basins (3). The timing of the closure of the Mongol-Okhotsk ocean is still highly debated: while sedimentological and tectonic data suggest that the oceanic closure and the following collision occurred in early Middle Jurassic (4), paleomagnetic studies advocate for a Early Cretaceous collision (5). Furthermore, several other questions remain on the localization, the size and the fate of the relief that most probably formed during the collision between the Amuria block and the Siberian craton. In order to answer those questions we used low temperature thermochronology data associated to tectonic, sedimentology and palinology to investigate the evolution of the Transbaikal grabens from Mesozoic to Present. Tectonic and thermochronology data provide evidences of exhumation and erosion along the eastern edge of the Siberian craton during the Middle Jurassic as well as a potential continuum of deformation between the Mesozoic extension and the initiation of the Baikal Rift System (6). Sedimentology and palinology reveals that the sediments deposited in the Transbaikal basin did not registered large-scale compressive deformation during or after their Late Jurassic - Early Cretaceous deposition and that they do not correspond to the dismantling of a strong compressive relief.
Geophysical Research Abstracts
Vienne, Austria

insu-00810487
https://hal-insu.archives-ouvertes.fr/insu-00810487

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The Ryukyu subduction is known to generate very few earthquakes in its central segment contrarily to its two extremities. We focus in this study on the southernmost part of the Ryukyu subduction zone offshore east Taiwan. Our first task was to build a homogeneous earthquake catalogue for the period 1900–2007. The new catalogue provides homogenized M′W magnitudes and shows that several M′W≥ 7.0 earthquakes occurred offshore Hualien and Suao cities. We then focused on the 1920 June 5 earthquake (reported surface wave magnitude 8.1) previously located beneath the accretionary prism. The revised moment magnitude has been estimated in our catalogue at 7.7 ± 0.2. It is the biggest earthquake ever recorded in the Taiwan area but the fault that has produced this earthquake has not yet been identified with confidence. We relocated this event using regional phases (seismological bulletins archived at the Central Weather Bureau of Taiwan) about 50 km NNE and shallower of its former location, that is, within the Ryukyu Arc basement. According to earthquake bulletin information, revised magnitude, new hypocentral determination and known regional faults, we propose four potential active faults as candidates for the slip associated to this event: (1) the interplate seismogenic zone (ISZ), (2) an out-of-sequence thrust cutting through the forearc and branching on the ISZ, (3) a NS strike-slip fault cutting through the Ryukyu arc and (4) a N–S, westward dipping thrust fault, affecting the Philippine Sea Plate east of the Luzon Arc. The best compromise is to consider a rupture along the ISZ with a shallow nucleation possibly along a splay-fault followed by a downward and lateral propagation of the rupture that would explain the lack of significant seafloor motion and subsequent tsunami. We also estimate the maximum seismic coupling of the ISZ in the region east of Taiwan to about 0.4. In parallel, the evidences of aseismic slip occurring along the ISZ allow us to conclude that this region should only be affected by M < 8 earthquakes.
ISSN: 0956-540X

hal-00545459
https://hal.archives-ouvertes.fr/hal-00545459
https://hal.archives-ouvertes.fr/hal-00545459/document
https://hal.archives-ouvertes.fr/hal-00545459/file/theunisseGJI2010.pdf
DOI : 10.1111/j.1365-246X.2010.04813.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper provides a synthesis of current data and interpretations on the crustal structure of the Pyrenean-Cantabrian orogenic belt, and presents new tectonic models for representative transects. The Pyrenean orogeny lasted from Santonian (~84 Ma) to early Miocene times (~20 Ma), and consisted of a spatial and temporal succession of oceanic crust/exhumed mantle subduction, rift inversion and continental collision processes at the Iberia-Eurasia plate boundary. A good coverage by active-source (vertical-incidence and wide-angle reflection) and passive-source (receiver functions) seismic studies, coupled with surface data have led to a reasonable knowledge of the present-day crustal architecture of the Pyrenean-Cantabrian belt, although questions remain. Seismic imaging reveals a persistent structure, from the central Pyrenees to the central Cantabrian Mountains, consisting of a wedge of Eurasian lithosphere indented into the thicker Iberian plate, whose lower crust is detached and plunges northwards into the mantle. For the Pyrenees, a new scheme of relationships between the southern upper crustal thrust sheets and the Axial Zone is here proposed. For the Cantabrian belt, the depth reached by the N-dipping Iberian crust and the structure of the margin are also revised.The common occurrence of lherzolite bodies in the northern Pyrenees and the seismic velocity and potential field record of the Bay of Biscay indicate that the precursor of the Pyrenees was a hyperextended and strongly segmented rift system, where narrow domains of exhumed mantle separated the thinned Iberian and Eurasian continental margins since the Albian-Cenomanian. The exhumed mantle in the Pyrenean rift was largely covered by a Mesozoic sedimentary lid that had locally glided along detachments in Triassic evaporites. Continental margin collision in the Pyrenees was preceded by subduction of the exhumed mantle, accompanied by the pop-up thrust expulsion of the off-scraped sedimentary lid above. To the west, oceanic subduction of the Bay of Biscay under the North Iberian margin is supported by an upper plate thrust wedge, gravity and magnetic anomalies, and 3D inclined sub-crustal reflections. However, discrepancies remain for the location of continent-ocean transitions in the Bay of Biscay and for the extent of oceanic subduction. The plate-kinematic evolution during the Mesozoic, which involves issues as the timing and total amount of opening, as well as the role of strike-slip drift, is also under debate, discrepancies arising from first-order interpretations of the adjacent oceanic magnetic anomaly record.
ISSN: 0040-1951

insu-01683989
https://hal-insu.archives-ouvertes.fr/insu-01683989
https://hal-insu.archives-ouvertes.fr/insu-01683989/document
https://hal-insu.archives-ouvertes.fr/insu-01683989/file/teixell-tectono-2018.pdf
DOI : 10.1016/j.tecto.2018.01.009

Éditeur(s) : HAL CCSD American Association for the Advancement of Science
Résumé : International audience
Sediments cored along the southwestern Iberian margin during Integrated Ocean Drilling Program Expedition 339 provide constraints on Mediterranean Outflow Water (MOW) circulation patterns from the Pliocene epoch to the present day. After the Strait of Gibraltar opened (5.33 million years ago), a limited volume of MOW entered the Atlantic. Depositional hiatuses indicate erosion by bottom currents related to higher volumes of MOW circulating into the North Atlantic, beginning in the late Pliocene. The hiatuses coincide with regional tectonic events and changes in global thermohaline circulation (THC). This suggests that MOW influenced Atlantic Meridional Overturning Circulation (AMOC), THC, and climatic shifts by contributing a component of warm, saline water to northern latitudes while in turn being influenced by plate tectonics.
ISSN: 0036-8075

hal-01054316
https://hal.archives-ouvertes.fr/hal-01054316
DOI : 10.1126/science.1251306

Éditeur(s) : HAL CCSD
Résumé : International audience
South-east Iran is the site of a rare case of young transition between subduction and collision. We synthesized recent results in geodesy, tectonics, seismology and magnetism to understand the structure and kinematics of the Zagros-Makran transition. Surface observations (tectonics, magnetism and geodesy) draw a transpressive discontinuity consisting of several faults striking obliquely to the convergent plate motion, whereas deeper observations (seismology) support a smooth transition across the fault system. No lithospheric transform fault has been created, even though the transition already behaves like a major boundary in terms of tectonic style, seismic structure, lithology and magnetism. The Zendan-Minab-Palami fault system consists of several faults that accommodate a transpressive tectonic regime. It is the surface expression of a southward propagation of the N-trending right-lateral strike-slip fault system of Jiroft-Sabzevaran. Within each system the numerous faults will coalesce into a single, lithospheric, wrench fault.
ISSN: 0375-6440

hal-00356532
https://hal.archives-ouvertes.fr/hal-00356532
https://hal.archives-ouvertes.fr/hal-00356532/document
https://hal.archives-ouvertes.fr/hal-00356532/file/Regard_MinabSynthese_revised_AvecFigs.pdf
DOI : 10.1144/SP330.4

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The interseismic velocity field provided by geodetic methods is generally interpreted in the framework of a thick elastic lithosphere with a slipping fault at depth. Because lateral variations of lithospheric rheology play a key role in determining the geological strain distribution, I examine the idea that interseismic strain rate variations also occur in response to lateral variations in the elastic thickness of the lithosphere. Using a stress balance principle and some simplifying assumptions, I show using a 1D model that elastic thickness is inversely proportional to strain rate for the simple case of pure strike-slip faulting. Elastic thickness computed on three profiles crossing the San Andreas fault system (SAFS) suggests that the distribution of interseismic strain rate is compatible with a thick elastic lithosphere in the Great Basin-Sierra Nevada province and on the Pacific plate. Conversely, a thin plate with a shallow asthenosphere is needed on the SAFS to explain its high strain rate. A 2.5D Finite Element model of interseismic strain in the Carrizo Plain region in Central California shows how known vertical and horizontal variations of elastic properties refine 1D model predictions. In a case of a multiple fault system, I point out that the interseismic velocity is not causally tied to faults slip rate. Therefore, analysing the velocity field across the SAFS cannot reliably provide faults slip rate distribution as previously claimed. Rather, the apparent correlation between geologic slip rate and interseismic strain may only indicate that the elastic thickness plays a dominant role in controlling fault strength. Finally, I suggest that interseismic geodetic strain could be a new way to infer effective elastic plate thickness on the continents.
ISSN: 0012-821X

hal-00412155
https://hal.archives-ouvertes.fr/hal-00412155
DOI : 10.1016/j.epsl.2008.01.046

Éditeur(s) : HAL CCSD American Geophysical Union (AGU) American Geophysical Union
Résumé : International audience
GPS data reveal that the Brahmaputra Valley has broken from the Indian Plate and rotates clockwise relative to India about a point a few hundred kilometers west of the Shillong Plateau. The GPS velocity vectors define two distinct blocks separated by the Kopili fault upon which 2–3 mm/yr of dextral slip is observed: the Shillong block between longitudes 89 and 93°E rotating clockwise at 1.15°/Myr and the Assam block from 93.5°E to 97°E rotating at ≈1.13°/Myr. These two blocks are more than 120 km wide in a north-south sense, but they extend locally a similar distance beneath the Himalaya and Tibet. A result of these rotations is that convergence across the Himalaya east of Sikkim decreases in velocity eastward from 18 to ≈12 mm/yr and convergence between the Shillong Plateau and Bangladesh across the Dauki fault increases from 3 mm/yr in the west to >8 mm/yr in the east. This fast convergence rate is inconsistent with inferred geological uplift rates on the plateau (if a 45°N dip is assumed for the Dauki fault) unless clockwise rotation of the Shillong block has increased substantially in the past 4–8 Myr. Such acceleration is consistent with the reported recent slowing in the convergence rate across the Bhutan Himalaya. The current slip potential near Bhutan, based on present-day convergence rates and assuming no great earthquake since 1713 A.D., is now ~5.4 m, similar to the slip reported from alluvial terraces that offsets across the Main Himalayan Thrust and sufficient to sustain a Mw ≥ 8.0 earthquake in this area.
ISSN: 0148-0227

hal-01115084
https://hal.archives-ouvertes.fr/hal-01115084
DOI : 10.1002/2014JB011196

Éditeur(s) : HAL CCSD
Résumé : International audience
Metamorphic soles correspond to m to 500m thick tectonic slices welded beneath most of the large-scale ophiolites.They typically show a steep inverted metamorphic structure where the pressure and temperature conditions ofcrystallization increase upward (from 500100ºC at 0.50.2 GPa to 800100ºC at 1.00.2 GPa), with isogradssubparallel to the contact with the overlying ophiolitic peridotite. The proportion of mafic rocks in metamorphicsoles also increases from the bottom (meta-sediments rich) to the top (approaching the ophiolite peridotites). Thesesoles are interpreted as the result of heat transfer from the incipient mantle wedge toward the nascent slab (associatedwith large-scale fluid transfer and possible shear heating) during the first My of intra-oceanic subduction(as indicated by radiometric ages). Metamorphic soles provide therefore major constraints on early subductiondynamics (i.e. thermal structure, fluid migration and rheology along the nascent slab interface).We present a detailed structural and petrological study of the metamorphic sole from 4 major cross-sections alongthe Oman ophiolite. We show precise pressure–temperature estimates obtained by pseudosection modelling andEBSD measurements performed on both the garnet-bearing and garnet-free high-grade sole. Results allow quantificationof the micro-scale deformation and highlight differences in pressure–temperature–deformation conditionsbetween the 4 different locations, showing that the inverted metamorphic gradient through the sole is not continuousin all locations.Based on these new constraints, we suggest a new tectonic–petrological model for the formation of metamorphicsoles below ophiolites. This model involves the stacking of several homogeneous slivers of oceanic crust leadingto the present-day structure of the sole. In this view, these thrusts are the result of rheological contrasts between thesole and the peridotite as the plate interface progressively cools down. These slivers later underwent several stagesof retrogression (partly mediated by ascending fluids from the slab) from amphibolite- to prehnite/pumpellite-faciesconditions.
Geophysical Research Abstracts
Vienne, Austria

insu-01309369
https://hal-insu.archives-ouvertes.fr/insu-01309369

Éditeur(s) : The American Asscoiation of Petroleum Geologists
Résumé : A plate tectonic model of the early opening of the south atlantic is used to des cibe the structural framework of the continental margins and adjacent oceanic and coastal areas on both sides of the ocean. It is proposed that major offsets of the continental margins necessarily induce the subsidence of coastal basins where fracture zones intersect the continents. The configuration of the accreting plate-margin boundary gradually developed throughout the opening of the ocean after Late Jurassic time. [NOT CONTROLLED OCR]
The American Asscoiation of Petroleum Geologists Bulletin (The American Asscoiation of Petroleum Geologists), 1972 , Vol. 56 , N. 6 , P. 991-1007

Droits : The American Asscoiation of Petroleum Geologists
http://archimer.ifremer.fr/doc/1972/publication-5033.pdf
http://archimer.ifremer.fr/doc/00000/5033/

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Detailed seafloor mapping in the area east of Taiwan revealed trench-parallel stretching and folding of the Ryukyu forearc and lateral motion of the accretionary wedge under oblique convergence. East of 122ø40'E, a steep accretionary wedge is elongated in an E-W direction. A major transcurrent right-lateral strike-slip fault accommodates the strain partitioning caused by an oblique convergence of 40 ø. A spectacular out-of-sequence thrust may be related to the subduction of a structural high lying in the axis of the N-S trending Gagua Ridge. This asperity is likely responsible for the uplift of the accretionary wedge and forearc basement and may have augmented strain partitioning by increasing the coupling between the two plates. West of 122ø40'E, the low-taper accretionary wedge is sheared in a direction subparallel to the convergence vector with respect to the Ryukyu Arc. The bayonet shape of the southern Ryukyu Arc slope partly results from the recent (re)opening of the southern Okinawa Trough at a rate of about 2 to 4 cm/yr. Right-lateral shearing of the sedimentary forearc with respect to the nonlinear Ryukyu backstop generates trench-parallel extension in the forearc sediment sequence at dilational jogs and trench-parallel folding at compressive jogs. The Hoping Basin lies above a diffuse trench/trench/fault (TTF) or TFF unstable triple junction moving toward the south along a N-S transform zone which accommodates the southward drift of the Ryukyu Arc with respect to Eurasia.
ISSN: 0278-7407

hal-01261555
https://hal.archives-ouvertes.fr/hal-01261555
https://hal.archives-ouvertes.fr/hal-01261555/document
https://hal.archives-ouvertes.fr/hal-01261555/file/Lallemand_et_al-1999-Tectonics.pdf
DOI : 10.1029/1998TC900011

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
A network of 54 survey GPS sites, 28 continuous GPS stations and three absolute gravity (AG) observation sites have been set up in the Alborz mountain range to quantify the present-day kinematics of the range. Our results allow us to accurately estimate the motion of the South Caspian block (SCB) for the first time, and indicate rotation of the SCB relative to Eurasia, accounting for the left lateral motion in the Alborz range. In light of these new results, it clearly appears that deformation rates vary along the range, the eastern part accommodating mainly left lateral strike slip (2 mm yr(-1) south of the range and 5 mm yr(-1) north of the range) with a very low range normal shortening rate on the Khazar thrust fault (similar to 2 mm yr(-1)), and the western part accommodating range normal shortening (similar to 6 mm yr-1) on the Khazar thrust fault with a left lateral component of similar to 2 mm yr(-1) north of the range and 1 mm yr(-1) south of the range. These present-day kinematics agree with geomorphologic estimated slip rates, but not the long-term deformation, corroborating the idea that the kinematics of the range have changed recently due to the change of SCB motion.;Modelling of the interseismic deformation suggests a deep locking depth on the central-western segment of the Khazar fault (similar to 30 km) in agreement with the Baladeh earthquake rupture and aftershock ranging between 10 and 30 km. Given this unusual deep locking depth and the 34 degrees dip of the thrust, a large part of the Alborz range is located above the seismically coupled part of the fault. Based on our AG measurements this part of the range seems to uplift at a rate of 1-5 mm yr(-1), in agreement with terrace uplift.
ISSN: 0956-540X

hal-00617146
https://hal.archives-ouvertes.fr/hal-00617146
https://hal.archives-ouvertes.fr/hal-00617146v2/document
https://hal.archives-ouvertes.fr/hal-00617146/file/djamour2010.pdf
DOI : 10.1111/j.1365-246X.2010.04811.x

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Selected high-resolution seismic-reflection profiles and multibeam bathymetry acquired along the convergent Ecuador margin during the ATACAMES cruise on onboard the R/V L’Atalante (Jan.15–Feb.18, 2012) allow a preliminary evaluation of the neotectonic development and stratigraphic evolution of the margin based on the sismo-stratigraphic analysis of Quaternary sediment preserved on the margin shelf and upper slope. We present three major preliminary results. (1) The evolution of the Esmeraldas, Guayaquil and Santa Elena canyons. The head of the Esmeraldas canyon is the location of a continuous significant sediment transport. The Guayaquil canyon shows several episodes of deposition and incision. Aggrading sedimentation pattern in the canyon records several changes in relative sea-level. The subsidence of the Gulf of Guayaquil probably contributes to the good preservation of the canyon filling stages. The Santa Elena canyon is controlled by a SW–NE trending normal fault. (2) Variations of sediment accumulation and relative vertical motions are shown along-strike the shelf edge. Offshore the uplifted Manta peninsula, a pronounced subsidence of the shelf edge is documented by sedimentary clinoforms that have deposited in a morphological reentrant, and have migrated upslope testifying of a local subsidence meanwhile the adjacent La Plata Island area underwent uplift. In the Esmeraldas canyon area, a local uplift of the shelf is documented. (3) Two neotectonic fault systems with a possible transcurrent component are imaged across the shelf edge and upper margin slope offshore Jama, and Cape Galera. This possible transcurrent motion could be related to the reactivation of ancient faults of the upper plate by the subduction. These preliminary results indicate that the ATACAMES data set has a strong potential to evaluate the spatial and temporal contribution of tectonic and climate changes on the structural development and stratigraphic evolution of the Ecuador continental margin.
ISSN: 0025-3235

insu-01131151
https://hal-insu.archives-ouvertes.fr/insu-01131151
DOI : 10.1007/s11001-014-9231-y

Éditeur(s) : HAL CCSD
Résumé : This work addresses a study of geodynamics in Armenia, a country located in the central part of the zone of continental collision between the Arabian and Eurasian lithosphere plates. The work includes two main parts: study of recent deformations of the lithosphere by means of GPS and detailed paleoseismological and morphometric investigations in the zone of the Artanish-Tskhouk segment of the PSSF. We analyze and compare rates of deformation determined by the GPS data and the rates estimated by the paleoseismological and morphometric studies. The Armenian-French network of GPS observations was installed in Armenia in 1998. Three observation sessions were conducted in 1998, 2000 and 2003. Based on the evidence obtained, a detailed study of the velocity field was conducted to analyze lithosphere deformation in Central and Northern Armenia. Slip rates were estimated for the principal active faults in Armenia. Several field works, including paleoseismological, archaeo-seismological, archaeological, geodetic and morphological studies, had been implemented in the zone of the Artanish-Tskhouk segment of the PSSF in 2003-2005. The fault was mapped in detail; rates of main horizontal and vertical slip along the fault were estimated and re-estimated. Four (4) paleo- and archeo-earthquakes were studied and dated. Eventually, the obtained data allowed us to re-estimate slip rates, maximum possible magnitudes and recurrence intervals of strong earthquakes on the Artanish-Tskhouk segment of the PSSF. A technique enabling estimation of horizontal and vertical displacements along strike-slip faults during paleo-earthquakes by the evidence obtained from paleo-seismological trenching was developed.
Les travaux présentés dans ce mémoire sont consacrés à l'étude de la géodynamique du territoire de l'Arménie qui est situé dans la partie centrale de la zone de collision continentale entre les plaques Arabique et Eurasienne. Le mémoire comprend deux parties principales: 1/ l'étude des déformations actuelles par la géodésie GPS; 2/ l'étude paléosismologique et morphométrique détaillée de la zone du segment d'Artanish-Tskhuk de la faille de Pambak-Sevan-Syunik (PSSF). On présente l'analyse et la comparaison des vitesses de déformations estimées par les données de GPS et par les données paléosismologiques et morphométriques. Le réseau d'observations GPS Arméno - Français a été installé en Arménie en septembre 1998. Trois campagnes de mesure du réseau ont été réalisées en 1998, 2000 et 2003. L'analyse détaillée du champ de vitesse à partir des données GPS a permis d'étudier et de quantifier les déformations actuelles de l'Arménie centrale et septentrionale. On a pu estimer les vitesses des déplacements des failles actives principales du territoire de l'Arménie. Un ensemble de travaux sur le terrain comprenant des recherches paléosismologiques, archéosismologiques, archéologiques, géodésiques, et morphologiques a été réalisé entre 2003 et 2005 dans la zone du segment d'Artanish-Tskhuk de la faille de PSSF. La cartographie détaillée de la faille a été réalisée et l'on a estimé et/ou re-estimés les déplacements horizontaux et verticaux le long de la faille. Quatre paléo- et archéoséismes ont été étudiés et datés. À partir des données obtenues, pour le segment d'Artanish-Tskhuk de la faille de PSSF, on a réévalué les vitesses de déplacements, la magnitude maximale possible, et l'intervalle récurrence des séismes forts. Une méthode d'évaluation des déplacements horizontaux et verticaux a été proposée à partir des logs de tranchées sur les failles de décrochements associées à des paléoséismes.
https://tel.archives-ouvertes.fr/tel-00551535

Droits : info:eu-repo/semantics/OpenAccess
tel-00551535
https://tel.archives-ouvertes.fr/tel-00551535
https://tel.archives-ouvertes.fr/tel-00551535/document
https://tel.archives-ouvertes.fr/tel-00551535/file/thesedavtyan2.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The initiation and subsequent evolution of intra-plate orogens, resulting from continental plate interior deformation due to transmission of stresses over large distances from the active plate boundaries, is controlled by lateral and vertical strength contrasts in the lithosphere. We present lithospheric-scale analogue models combining 1) lateral strength variations in the continental lithosphere, and 2) different vertical rheological stratifications. The experimental continental lithosphere has a four-layer brittle–ductile rheological stratification. Lateral heterogeneity is implemented in all models by increased crustal strength in a central narrow block. The main investigated parameters are strain rate and strength of the lithospheric mantle, both playing an important role in crust–mantle coupling. The experiments show that the presence of a strong crustal domain is effective in localizing deformation along its boundaries. After deformation is localized, the evolution of the orogenic system is governed by the mechanical properties of the lithosphere such that the final geometry of the intra-plate mountain depends on the interplay between crust–mantle coupling and folding versus fracturing of the lithospheric mantle. Underthrusting is the main deformation mode in case of high convergence velocity and/or thick brittle mantle with a final asymmetric architecture of the deep lithosphere. In contrast, lithospheric folding is dominant in case of low convergence velocity and low strength brittle mantle, leading to the development of a symmetric lithospheric root. The presented analogue modelling results provide novel insights for 1) strain localization and 2) the development of the asymmetric architecture of the Pyrenees.
ISSN: 0012-821X

hal-01243577
https://hal.archives-ouvertes.fr/hal-01243577
DOI : 10.1016/j.epsl.2015.05.022