Résumé : Le cadre juridique des investissements étrangers en Algérie a été marqué par de profonds changements depuis la promulgation du premier code des investissements, en 1963. Cette mutation n’a pas toujours été en phase avec les processus de développement économique national et le changement du contexte international. Le modèle socialiste de la gestion des affaires économiques qui a prédominé à partir du milieu des années 60 jusqu'au milieu des années 80 a progressivement cédé la place à un retrait graduel de l'Etat du champ économique. On assiste, depuis, à une émergence d’un secteur privé qui tente toujours de trouver sa place, à une vague de privatisations, à une libéralisation du commerce extérieur et à un appel aux capitaux étrangers pour financer le développement économique.Cette volonté manifeste d’accéder à une économie de marché est encore plus perceptible dans le dernier code des investissements de 2001. Ces efforts de mise en conformité du droit interne des investissements avec le droit international des investissements sont relayés par un discours politique offensif.Néanmoins, cet environnement juridique incitatif perd de son attrait lorsqu’on le confronte, soit aux textes promulgués en matière de réglementation du commerce extérieur et la réglementation des changes, soit à l’environnement administratif dans lequel est mis en œuvre l’ensemble de ces textes de lois. Cette confrontation est particulièrement instructive quant à l’insuffisance de cohérence de la politique étatique suivie en matière d’investissement étranger. Ceci révèle la balance d’intérêt des autorités algériennes entre l’augmentation de la contribution des investissements étrangers au potentiel économique et technologique national et la sauvegarde de la souveraineté nationale.Ainsi, le questionnement de la politique législative algérienne d’investissement permet de comprendre les fondements de la doctrine algérienne des investissements étrangers. Cette compréhension favorise l’émergence d’une stratégie qui concilie attractivité et préservation des intérêts publics.
The legal framework for foreign investment in Algeria was marked by profound changes since the enactment of the first investment code in 1963 This change has not always been in line with the process of national economic development and change in the international environment . The socialist model of economic management that prevailed from the mid 60s to mid 80s gradually gave way to a gradual withdrawal of the state from the economic field. There has since been an emergence of a private sector that is still trying to find its place, a wave of privatization, liberalization of foreign trade and to rely on foreign capital to finance the development will économique.Cette Manifest access to a market economy is even more noticeable in the latest investment Code of 2001 These efforts compliance of domestic investment law with the international investment law are supported by a political speech offensif.Néanmoins, the legal environment incentive loses its appeal when confronted or to enactments in regulation of foreign trade and foreign exchange regulations, or administrative environment that is implemented in all these laws. This comparison is particularly instructive about the lack of consistency in state policy with respect to foreign investment. This reveals the balance of interest between the Algerian authorities increasing the contribution of foreign investment to national economic and technological potential and safeguarding sovereignty nationale.Ainsi, questioning the Algerian legislative investment policy allows us to understand the foundations of the Algerian doctrine of foreign investment. This understanding promotes the emergence of a strategy that balances attractiveness and preservation of public interest.

http://www.theses.fr/2012AGUY0785

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : The acquisition of reliable data sets representative of hydrological regimes and their variations is a critical concern for water resource assessment. For the subsurface, traditional approaches based on probe measurements, core analysis, and well data can be laborious, expensive, and highly intrusive, while only yielding sparse data sets. For this study, an innovative field survey, merging relative microgravimetry, magnetic resonance soundings, and hydrological measurements, was conducted to evaluate both surface and subsurface water storage variations in a semiarid Sahelian area. The instrumental setup was implemented in the lower part of a typical hillslope feeding to a temporary pond. Weekly measurements were carried out using relative spring gravimeters during 3 months of the rainy season in 2009 over a 350 × 500 m2 network of 12 microgravity stations. Gravity variations of small to medium amplitude (≤220 nm s−2) were measured with accuracies better than 50 nm s−2, revealing significant variations of the water storage at small time (from 1 week up to 3 months) and space (from a couple of meters up to a few hundred meters) scales. Consistent spatial organization of the water storage variations were detected, suggesting high infiltration at the outlet of a small gully. The comparison with hydrological measurements and magnetic resonance soundings involved that most of the microgravity variations came from the heterogeneity in the vadose zone. The results highlight the potential of time lapse microgravity surveys for detecting intraseasonal water storage variations and providing rich space-time data sets for process investigation or hydrological model calibration/evaluation
ISSN: 0043-1397

hal-00857351
https://hal.archives-ouvertes.fr/hal-00857351
DOI : 10.1002/wrcr.20235

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Contractional deformation of highly porous sandstones is poorly explored, as compared to extensional deformation of such sedimentary rocks. In this work we explore the highly porous Aztec Sandstone in the footwall to the Muddy Mountain thrust in SE Nevada, which contains several types of deformation bands in the Buffington tectonic window: 1) Distributed centimeter-thick shear-enhanced compaction bands (SECBs) and 2) rare pure compaction bands (PCBs) in the most porous parts of the sandstone, cut by 3) thin cataclastic shear-dominated bands (CSBs) with local slip surfaces. Geometric and kinematic analysis of the SECBs, the PCBs and most of the CSBs shows that they formed during ∼E–W (∼100) shortening, consistent with thrusting related to the Cretaceous to early Paleogene Sevier orogeny of the North American Cordilleran thrust system. Based on stress path modeling, we suggest that the compactional bands (PCBs and SECBs) formed during contraction at relatively shallow burial depths, before or at early stages of emplacement of the Muddy Mountains thrust sheet. The younger cataclastic shear bands (CSBs, category 3), also related to E–W Sevier thrusting, are thinner and show larger shear offsets and thus more intense cataclasis, consistent with the initiation of cataclastic shear bands in somewhat less porous materials. Observations made in this work support earlier suggestions that contraction lead to more distributed band populations than what is commonly found in the extensional regime, and that shear-enhanced compaction bands are widespread only where porosity (and permeability) is high.
ISSN: 0191-8141

hal-01171854
https://hal.archives-ouvertes.fr/hal-01171854
DOI : 10.1016/j.jsg.2015.02.014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We compile field data collected along the eastern part of the North Pyrenean Zone (NPZ) to point to a tectonic evolution under peculiar thermal conditions applying to the basin sediments in relation with the opening of the Cretaceous Pyrenean rift. Based on this compilation, we show that when thinning of the continental crust increased , isotherms moved closer to the surface with the result that the brittle-ductile transition propagated upward and reached sediments deposited at the early stage of the basin opening. During the continental breakup, the pre-rift Mesozoic cover was efficiently decoupled from the Paleozoic basement along the Triassic evaporite level and underwent drastic ductile thinning and boudinage. We suggest that the upper Albian and upper Creta-ceous flysches acted as a blanket allowing temperature increase in the mobile pre-rift cover. Finally, we show that continuous spreading of the basin floor triggered the exhumation of the metamorphic, ductily sheared pre-rift cover, thus contributing to the progressive thinning of the sedimentary pile. In a second step, we investigate the detailed geological records of such a hot regime evolution along a reference-section of the eastern NPZ. We propose a balanced restoration from the Mouthoumet basement massif (north) to the Boucheville Albian basin (south). This section shows a north to south increase in the HT Pyrenean imprint from almost no metamorphic recrystallization to more than 600 °C in the pre-and syn-rift sediments. From this reconstruction, we propose a scenario of tectonic thinning involving the exhumation of the pre-rift cover by the activation of various detachment surfaces at different levels in the sedimentary pile. In a third step, examination of the architecture of current distal passive margin domains provides confident comparison between the Pyrenean case and modern analogs. Finally, we propose a general evolutionary model for the pre-rift sequence of the Northeastern Pyrenean rifted margin.
ISSN: 0040-1951

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01355131
https://hal-insu.archives-ouvertes.fr/insu-01355131
https://hal-insu.archives-ouvertes.fr/insu-01355131/document
https://hal-insu.archives-ouvertes.fr/insu-01355131/file/TECTO10807-Incorporated%20changes-rev2.pdf
DOI : 10.1016/j.tecto.2016.07.022

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Quartz is a common crustal mineral that deforms plastically in a wide range of temperatures and pressures, leading to the development of different types of crystallographic preferred orientation (CPO) patterns. In this contribution we present the results of an extensive modeling of quartz fabric transitions via a viscoplastic self-consistent (VPSC) approach. For that, we have performed systematic simulations using different sets of relative critical resolved shear stress of the main quartz slip systems. We have performed these simulations in axial compression and simple shear regimes under constant Von Mises equivalent strain of 100% (γ = 1.73), assuming that the aggregates deformed exclusively by dislocation glide. Some of the predicted CPOs patterns are similar to those observed in naturally and experimentally deformed quartz. Nevertheless, some classical CPO patterns usually interpreted as result from dislocation glide (e.g. Y-maxima due to prism < a > slip) are clearly not developed in the simulated conditions. In addition we reported new potential preferred orientation patterns that might happen in high temperature conditions, both in axial compression and simple shear. We have demonstrated that CPOs generated under axial compression are usually stronger that those predicted under simple shear, due to the continuous rotation observed in the later simulations. The fabric strength depends essentially on the dominant active slip system, and normally the stronger CPOs result from dominant basal slip in < a >, followed by rhomb < a > and prism [c] slip, whereas prism < a > slip does not produce strong fabrics. The opening angle of quartz [0001] fabric used as a proxy of temperature seems to be reliable for deformation temperatures of ~ 400 °C, when the main slip systems have similar behaviors.
ISSN: 0040-1951

hal-01115674
https://hal.archives-ouvertes.fr/hal-01115674
DOI : 10.1016/j.tecto.2014.08.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Four decades after their introduction, the validity of fault slip inversion methods based on Wallace (1951) and Bott (1959) hypothesis, which states that the slip on each fault surface has the same direction and sense as the maximum resolved shear stress, is still a subject of debate. According to some authors, this hypothesis is questionable since fault mechanical interactions induce slip reorientations as confirmed by geomechanical models. This leads us to ask as to what extent the Wallace-Bott simplifications are reliable as a basis hypothesis for stress inversion from fault slip data. In this paper, we compare two inversion methods; the first is based on the Wallace-Bott hypothesis, and the second relies on geomechanics and mechanical effects on fault heterogeneous slip distribution. In that context, a multi-parametric stress inversion study covering (i) the friction coefficients (μ), (ii) the full range of Andersonian state of stress and (iii) slip data sampling along the faults is performed. For each tested parameter, the results of the mechanical stress inversion and the Wallace-Bott (WB) based stress inversion for slip are compared in order to understand their respective effects. The predicted discrepancy between the solutions of both stress inversion methods (based on WB and mechanics) will then be used to explain the stress inversions results for the chimney Rock case study. It is shown that a high solution discrepancy is not always correlated with the misfit angle (ω ) and can be found under specific configurations (View the MathML sourceR−, θ, μ, geometry) invalidating the WB solutions. We conclude that in most cases the mechanical stress inversion and the WB based stress inversion are both valid and complementary depending on the fault friction. Some exceptions (i.e. low fault friction, simple fault geometry and pure regimes) that may lead to wrong WB based stress inversion solutions are highlighted.
ISSN: 0040-1951

hal-01467165
https://hal.archives-ouvertes.fr/hal-01467165
DOI : 10.1016/j.tecto.2016.11.039