Éditeur(s) : ESA Publication
Résumé : Satellite remote sensing has emerged as an essential and necessary observing system to acquire global information about the state of the ocean. Complemented with in situ observing networks, the ultimate goals are to be able to make accurate estimates of selected key sets of geophysical variables, with the intention of either making operational predictions across time and spatial boundaries, or advancing fundamental knowledge through development of empirical relationships and theoretical models. For satellite oceanography, improvements are then constantly being sought in our understandings of the geophysical processes, the sensor physics, the electromagnetic and microwave properties and interactions at the complex air-sea interface. Challenges appear as unlimited as the variety of sea surface dynamics and boundary layer meteorological conditions with their broad range of spatial and temporal scales across the globe. To face these challenges, numerous efforts took places over the passed decade to build an ever-increasing quality, quantity, duration and integration of ocean observations. In parallel, simulation capabilities largely improved. All these efforts are then all critically calling for improved methodologies to better structure the wealth of information that is made readily accessible. This latter aspect is a very demanding new component for future multidisciplinary scientific research. Major innovations to consolidate sensor data repositories, to automate tailored queries, to extract, reveal and quantify relationships will then closely associate computer science developments and applied statistics with comprehensive theoretical and experimental thematic studies.
Proceedings of OceanObs'09: Sustained Ocean Observations and Information for Society (ESA Publication), 2010

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00029/14046/11241.pdf
DOI:10.5270/OceanObs09.pp.12
http://archimer.ifremer.fr/doc/00029/14046/

Éditeur(s) : Amer Geophysical Union
Résumé : An analysis is presented for the spatial and intensity distributions of North Atlantic extreme atmospheric events crossing the buoyant Amazon-Orinoco freshwater plume. The sea surface cooling amplitude in the wake of an ensemble of storm tracks traveling in that region is estimated from satellite products for the period 1998-2012. For the most intense storms, cooling is systematically reduced by approximate to 50% over the plume area compared to surroundings open-ocean waters. Historical salinity and temperature observations from in situ profiles indicate that salt-driven vertical stratification, enhanced oceanic heat content, and barrier-layer presence within the plume waters are likely key oceanic factors to explain these results. Satellite SMOS surface salinity data combined with in situ observations are further used to detail the oceanic response to category 4 hurricane Igor in 2010. Argo and satellite measurements confirm the haline stratification impact on the cooling inhibition as the hurricane crossed the river plume. Over this region, the SSS mapping capability is further tested and demonstrated to monitor the horizontal distribution of the vertical stratification parameter. SMOS SSS data can thus be used to consistently anticipate the cooling inhibition in the wake of TCs traveling over the Amazon-Orinoco plume region.
Journal Of Geophysical Research-oceans (0148-0027) (Amer Geophysical Union), 2014-12 , Vol. 119 , N. 12 , P. 8271-8295

Droits : 2014. American Geophysical Union. All Rights Reserved.
http://archimer.ifremer.fr/doc/00252/36326/34855.pdf
http://archimer.ifremer.fr/doc/00252/36326/34856.pdf
DOI:10.1002/2014JC010107
http://archimer.ifremer.fr/doc/00252/36326/

Éditeur(s) : HAL CCSD Elsevier
Résumé : The current interpretation of the Messinian Salinity Crisis (MSC) involves the deposition of the so-called “peripheral or marginal” evaporites in onshore basins, as well as the erosion of the margins and the formation of thick evaporites in the deep parts of the basins. The present study focuses on intermediate depth basins, i.e. located between the onshore outcrops and the deep basins. Indeed, the Balearic Promontory shows small stepped basins filled with MSC deposits between its western extremity on the Alicante shelf and its eastern end around the Menorca block. New and already available seismic reflection profiles and onshore data allow us to investigate the nature and geometrical relationships of these deposits in the area between the islands of Ibiza and Mallorca.Our observations suggest the existence of three MSC-related units in this area. The lowermost transparent seismic unit can be interpreted as a 100 to 200-m-thick salt layer deposited in the deepest part of the Central Mallorca Depression. These evaporites pass laterally and upward into a thin-bedded seismic unit, which could be lithologically equivalent to the Upper Evaporites of the deep basins. All around the borders of the Central Mallorca Depression, this bedded seismic unit onlaps a Slope Unit which shows bedded to chaotic and rafted facies. The Messinian continental shelf is eroded and incised by a valley extending from the Palma onshore area to the Mallorca downslope domain.Our results suggest the presence offshore of at least two generations of diachronous MSC deposits. The observation of salt on a continental high and the widespread MSC deposits on the margins of the Central Mallorca Depression call into question the location of halite preferentially in the deep abyssal basins and the significance of the deep basin MSC units that onlap onto the Margin Erosional Surface (MES), as observed all around the passive margins of the Northwest-Mediterranean Basin. The dual terminology used for peripheral/deep MSC evaporites cannot be applied to any of the MSC units found in the study area.
ISSN: 0025-3227

hal-01115656
https://hal.archives-ouvertes.fr/hal-01115656
DOI : 10.1016/j.margeo.2014.10.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : Deficient sealing in the well cement plugs and annulus due to mechanical fracturing is an important risk of CO2 leakage from the reservoir to others permeable layers and the surface. Such situation was reproduced at laboratory scale in order to determine the hydro-chemical control on the fracture permeability. Specifically, we investigated the effect of CO2 rich-brine flowing through fractured Portland cements at T = 60 °C and P = 10 MPa and variable flow rates. We showed that carbonation process is dominant and induces permeability decrease and leakage mitigation for extremely low flow rate whereas for high flow rate injection the permeability remains constant due to the precipitation of a low density secondary Si-rich phase which maintains the initial fracture aperture. At intermediate flow rate the hydraulic aperture can increase due to the densification of the material triggered by the net precipitation of low porosity calcite. These results emphasize that more complex behaviors than those considered from batch experiments may take place in the vicinity of flowing fractures. Specifically, the redissolution of the neoformed calcite as well as the development of amorphous phases, both controlled by the CO2-rich brine renewing rate in the fracture may prevent the healing fracture.
ISSN: 1750-5836

hal-00857555
https://hal.archives-ouvertes.fr/hal-00857555
DOI : 10.1016/j.ijggc.2013.04.002

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : 51 pages; 15figures; 3 tables, accepted for publication in PloS ONE
International audience
We present a study about AFM imaging of living, moving or self-immobilized, bacteria in their genuine physiological liquid medium. No external immobilization protocol, neither chemical nor mechanical, was needed. For the first time, the native gliding movements of Gram-negative Nostoc cyanobacteria upon the surface, at speeds up to 900microns/h, were studied by AFM. This was possible thanks to an improved combination of a gentle sample preparation process and an AFM procedure based on fast and complete force-distance curves made at every pixel, drastically reducing lateral forces. No limitation in spatial resolution or imaging rate was detected. Gram-positive and non-motile R. wratislaviensis bacteria were studied as well. From the approach curves, Young modulus and turgor pressure were measured for both strains at different gliding speeds and are ranging from 20±3 to 105±5MPa and 40±5 to 310±30kPa depending on the bacterium and the gliding speed. For Nostoc, spatially limited zones with higher values of stiffness were observed. The related spatial period is much higher than the mean length of Nostoc nodules. This was explained by an inhomogeneous mechanical activation of nodules in the Nostoc. We also observed the presence of a soft extra cellular matrix (ECM) around the Nostoc. Both strains left a track of polymeric slime with variable thicknesses. For R. wratislaviensis, it is equal to few hundreds of nanometers, likely to promote its adhesion to the sample. While gliding, the Nostoc secretes a slime layer the thickness of which is in the nanometer range and increases with the gliding speed.
ISSN: 1932-6203

hal-00769765
https://hal.archives-ouvertes.fr/hal-00769765
https://hal.archives-ouvertes.fr/hal-00769765v3/document
https://hal.archives-ouvertes.fr/hal-00769765/file/REsubmission_In-situ_determination_Dhahri_Plos_One_R2_Hal.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We report new structural, microstructural, petrological, and major- and trace-element data on ultramafic rocks from the Kondyor zoned ultramafic complex in Far-East Russia. The ultramafic rocks are subdivided into three subconcentric lithologies, from core to rim: (1) a metasomatic domain where generally phlogopite-rich dykes pervasively intrude dunite; (2) a main dunite core; (3) a pyroxenite rim. The ultramafic rocks have nearly vertical contacts with the surrounding Archaean basement (gneisses, quartzites and marbles) and hornfelsed Riphean sediments. The hornfelsed sediments show a relatively steep ( 60), outward dipping layering, which rapidly flattens to horizontal away from the inner contact. Although the Riphean sediments define a dome-like structure, the inward, shallow dipping foliation of the dunites indicates a synformal structure. Detailed petro-structural investigations indicate that the Kondyor dunites were deformed by solid-state flow under asthenospheric mantle conditions. The outward textural change from coarse- to fine-grained equigranular dunite and the outward-increasing abundance of subgrains and recrystallized olivine grains suggest dynamic recrystallization while fluid circulation was channelized within the core metasomatic zone, with a decreasing melt fraction from core to rim, and also suggest that solid-state deformation induced grain-size reduction towards the cooling border of the Kondyor massif. Based on their geochemistry, the dunites are interpreted as mantle rocks strongly affected by reaction with melts similar to the JurassicCretaceous Aldan Shield lamproites. Rim pyroxenites were formed by a melt-consuming peritectic reaction, implying the existence of at least a small, conductive thermal gradient around the dunite body while the latter was still at near-solidus temperature conditions. This suggests that the zoned structure of Kondyor was initiated at mantle depths, most probably within the subcontinental lithosphere. Upon cooling, the lamproitic melts were progressively focused in the central part of the massif and drained into vein conduits where they reacted with the wall-rock dunite. Two-dimensional numerical modelling based on finite-differences with a marker-in-cell technique incorporates temperature-dependent rheologies for both molten and non-molten host rocks. The modelling consolidates the structural, petrological and geochemical interpretations, which show that the dunites represent the synformal, flat-lying apex of an asthenospheric mantle diapir, triggered by fluid pressure channelized in the core, which nearly reached the Earths surface. We conclude that translithospheric mantle diapirism is an important mode of mass transfer in the Earth.
ISSN: 0022-3530

hal-00424508
https://hal.archives-ouvertes.fr/hal-00424508
DOI : 10.1093/petrology/egn083

Résumé : L’objet de cette thèse est l’étude des comportements mécanique et à la corrosion d’un nouveau système de fondation, dit pieux SPIRMEC, adapté aux structures légères. Le travail s’est focalisé sur deux grands aspects. Le premier aspect concerne l’analyse du comportement sous chargement axiale des pieux SPIRMEC sur la base de l’expérimentation et de la modélisation numérique dans un sol mou non cohésif. Quant au deuxième aspect, il traite du problème de la corrosion de l’acier constituant le pieu dans un environnement tropical humide. Le comportement des pieux SPIRMEC sous une charge axiale de traction, dans un sol fin non cohésif, a montré le développement d’une surface cylindrique de rupture. Celle-ci ne dépend pas de la configuration géométrique des pieux tel que : l’espacement S, le diamètre d’hélice Dh et le diamètre du tube d. En adoptant ce critère de rupture et à l’aide d’une analyse statistique des données, nous avons proposé quatre méthodes analytiques de prédiction de la capacité portante des pieux SPIRMEC à partir des essais in-situ et au laboratoire qui sont: •Méthode CPT basée sur la résistance de pointe pénétromètrique (essai CPT), •Méthode MPT basée sur la pression limite pressiomètrique (essai MPT), •Méthode du couple d’installation, •Méthode analytique basée sur les paramètres de cisaillement de sol notamment l’angle de frottement interne (essais triaxial et boîte de cisaillement). Ces méthodes tiennent compte de la géométrie du pieu, du procédé de mise en oeuvre et de la compacité du sol. L’analyse de performance des méthodes proposées a montré que les méthodes analytique et CPT représentent mieux le comportement des pieux testés. La modélisation numérique du comportement des pieux SPIRMEC sous charge axiale de traction a été également étudiée à l’aide du code de calcul Plaxis 2D. Un modèle axisymétrique a été adopté pour modéliser la géométrie de la structure. Le modèle de comportement hardening soil a été retenu pour modéliser le comportement élastoplastiq des couches de sol. Un modèle élastique linéaire a été retenu pour le pieu. Quant au comportement de l’interface sol-structure, il a été pris en compte par un modèle élastoplastique basé sur les critères de Mohr-Coulomb. L’expansion du sol résultant de l’installation des pieux a été approchée par une cavité cylindrique. Cette dernière a été modélisée par des déformations volumiques anisotropes. Nous avons constaté, qu’appliquer une déformation volumique de l’ordre de 40% permet une bonne concordance entre les résultats numériques et expérimentaux. L’étude paramétrique nous a également permis de constater l’existence d’une variation linéaire entre la capacité portante et l’espacement S. Le comportement de l’acier galvanisé dans le sol a été également étudié au moyen de trois approches: électrochimique, visuelles grâce au microscope électronique et gravimétrique. Les tests électrochimiques de corrosion du zinc ont été réalisés dans la solution de sol artificielle pour deux périodes bien distinctes : saison des pluies et après 8 mois de contact sol-pieu. Une forte dépendance est constatée de la vitesse de corrosion de zinc au pH et à la conductivité de la solution. La vitesse de corrosion est plus importante en saison des pluies qu’après 8 mois de contact de pieu avec le sol. Les fortes concentrations en sulfates semblent augmenter la vitesse de corrosion. Les analyses menées au MEB montrent que la zone de fluctuation de nappe et en surface externe (sol/air) sont les zones les plus corrodées. La comparaison entre les différentes techniques d’évaluation de la vitesse de corrosion a montré que l’eau de nappe peut être utilisée comme un milieu représentatif du profil chimique d’un sol non cohésif et légèrement granulaire.
The purpose of this thesis is to study the both behaviors mechanical and of the corrosion of a new foundation system, called spirec piles, for lightweight structures. The work was based on two main aspects. The first aspect concerns the analysis of behavior of the spirmec piles under axial loading on the basis of experimental and numerical modeling in a non-cohesive soft soil. On the second aspect, it addresses the problem of corrosion of steel forming the pile in a humid tropical environment. The behavior of the tested piles under axial traction load, in a non-cohesive soil, showed the development of a cylindrical surface of failure. This does not depend on the geometrical configuration of the tested piles such that: the spacing s, the helix diameter dh and the diameter of the shaft. By adopting this failure criterion and using statistical data analysis, we proposed four analytical methods for predicting the bearing capacity of the piles from in-situ and laboratory tests, which are: cpt method based on tip resistance penetrometer (cpt test), mpt method based on pressuremeter limit pressure (test mpt), method of installation torque and analytical method based on the shear parameters of soil (triaxial tests and shear box). These methods take into account the geometry of the pile, the method and implementation of soil compaction. Performance analysis of the proposed methods showed that the analytical methods and cpt represent better the behavior of piles tested. An axisymmetric condition was assumed to model this geometry in two-dimensional space. In this study, we proposed to model the pipe screw pile with plates elements available in plaxis 2d. The helixes were modeled as circular disks. Interface elements were incorporated along the pile to simulate the soil-pile interaction. Hardening soil model was chosen to describe the soil with drained behavior was assigned for all layers. Linear elastic for pile and elastic plastic model based on the mohr-coulomb criterion was used to describe the interface behavior. The lateral expansion generated by the pile shaft was modeled by anisotropic volumetric strains (ɛxx=ɛzz, ɛyy=0). The pile behavior under tensile loading at different volumetric strains, it is clear that the best fit was obtained at volumetric strain of 40%. The parametric study also allowed us to establish the existence of a linear variation between the bearing capacity and spacings. The behavior of the galvanized steel in the ground has also been studied using three approaches such as: electrochemical, microscopic imaging and gravimetrically. Electrochemical tests of the corrosion of the zinc have been made in artificial soil solution into two periods, the rainy season and after eight months of contact soil-pile. Is a strong dependence of the observed corrosion rate of the zinc at the ph and conductivity of the solution. The corrosion rate is higher in the rainy season compared to eight months of contact of the pile with soil. High sulfate concentrations increase the rate of corrosion. The meb analysis shows that the fluctuation zone of the water table is the most corroded area. Comparison between the different methods of evaluating the corrosion rate showed that the ground water may be used as a representative profile of the chemical environment of a non-cohesive soil and slightly granular.

http://www.theses.fr/2014AGUY0790/document

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The present study aims at better deciphering the different mechanisms involved in the functioning of the subduction interplate. A 2D thermo-mechanical model is used to simulate a subduction channel, made of oceanic crust, free to evolve. Convergence at constant rate is imposed under a 100 km thick upper plate. Pseudo-brittle and non-Newtonian behaviours are modelled. The influence of the subduction channel strength, parameterized by the difference in activation energy between crust and mantle () is investigated to examine in detail the variations in depth of the subduction plane down-dip extent, . First, simulations show that numerical resolution may be responsible for an artificial and significant shallowing of if the weak crustal layer is not correctly resolved. Second, if the age of the subducting plate is 100 Myr, subduction occurs for any . The stiffer the crust is, that is, the lower is, the shallower is (60 km depth if kJ/mol) and the hotter the fore-arc base is. Conversely, imposing a very weak subduction channel ( J/mol) leads there to an extreme mantle wedge cooling and inhibits mantle melting in wet conditions. Partial kinematic coupling at the fore-arc base occurs if kJ/mol. If the incoming plate is 20 Myr old, subduction can occur under the conditions that the crust is either stiff and denser than the mantle, or weak and buoyant. In the latter condition, cold crust plumes rise from the subduction channel and ascend through the upper lithosphere, triggering (1) partial kinematic coupling under the fore-arc, (2) fore-arc lithosphere cooling, and (3) partial or complete hindrance of wet mantle melting. then ranges from 50 to more than 250 km depth and is time-dependent if crust plumes form. Finally, subduction plane dynamics is intimately linked to the regime of subduction-induced corner flow. Two different intervals of are underlined: 80–120 kJ/mol to reproduce the range of slab surface temperature inferred from geothermometry, and 10–40 kJ/mol to reproduce the shallow hot mantle wedge core inferred from conditions of last equilibration of near-primary arc magmas and seismic tomographies. Therefore, an extra process controlling mantle wedge dynamics is needed to satisfy simultaneously the aforementioned observations. A mantle viscosity reduction, by a factor 4–20, caused by metasomatism in the mantle wedge is proposed. From these results, I conclude that the subduction channel down-dip extent, , should depend on the subduction setting, to be consistent with the observed variability of sub-arc depths of the subducting plate surface.
ISSN: 0031-9201

hal-01623155
https://hal.archives-ouvertes.fr/hal-01623155
DOI : 10.1016/j.pepi.2017.05.008

Éditeur(s) : Elsevier
Résumé : The French Guiana transform margin and Demerara abyssal plain have been recently surveyed in the framework of the EXTRAPLAC French Program of extension of the continental shelf (Guyaplac survey, Ifremer-IFP-SHOM-IPEV). Based on the interpretation of some of the data collected during the Guyaplac survey (Simrad-EM12 multibeam bathymetric data, backscatter imagery, and 3.5 kHz profiles), the area can be divided into three morphostructural domains. (1) The western Guiana margin, including a part of the Demerara plateau, an important bathymetric relief prolonging the continental platform off Guiana and Surinam. This domain is bounded by (1a) the NWSE trending northern border of the Demerara plateau which appears quite steep and corresponds to a transform segment of the margin, (1b) the N-S eastern border of the Demerara plateau which corresponds to a divergent segment of the margin. The Demerara plateau shows a segmented morphology, low slope gradients, and a very rough surface (ripples perpendicular to the slope direction). NNW-SSE structural steps seem to correspond to collapses of 100 km long blocs towards the east. Slumps initiate along these directions. The observed rough bathymetry seems to be related to creeping processes. At a greater scale (seismic data), this part of the margin has been totally destabilized (numerous imbricate transparent masses rooted at about 0.5 s.t.w.t.t. below seafloor). The NW-SE trending northern border of the Demerara plateau corresponds to a cliff-like continental slope, probably slightly smoother than other transform margins (Ghana/cote d'Ivoire margin). The N-S eastern border of Demerara plateau is characterized by numerous small-scale imbricate slumps. Some of these failures seem to be emplaced in the prolongation of the NNW-SSE structural steps identified on the Demerara plateau. (2) The eastern Guiana margin corresponds to a NW-SE oriented gullied transform margin segment. The associated continental slope is very steep and characterized by numerous imbricate slumps and related debris flows. Some undulated masses, probably corresponding to creeping sediments or to older mass-wasting events are still imprinted on bathymetry. This transform margin segment is nearly entirely destabilized and eroded. (3) The Demerara abyssal plain. This domain is characterized eastwards by channels belonging to the Amazon turbidite system and westwards, at the foot of Demerara continental slope, by sediment waves probably created by contour currents. To conclude, it seems that there is a strong relationship between the structure (transform and divergent segments) and the emplacement of recurrent slope instabilities. These are probably related to the steepness of the slopes but also to subsidence histories generating in some cases huge deep-seated collapses of the whole margin. Fluid ascents are common everywhere in the area, probably enhancing slope instability. Their origin is not constrained but the black shales or Cretaceous organic-rich layers could be good candidates.
Marine and Petroleum Geology (0264-8172) (Elsevier), 2009-05 , Vol. 26 , N. 5 , P. 711-723

Droits : 2008 Elsevier Ltd All rights reserved.
http://archimer.ifremer.fr/doc/2009/publication-6856.pdf
DOI:10.1016/j.marpetgeo.2008.02.010
http://archimer.ifremer.fr/doc/00000/6856/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Coupling between erosion and tectonics is thought to play a determinant role in orogenic evolution. Here, we investigate the interplay in this coupling between the assumed erosion law and the crustal rheology at the margin of a collisional plateau, like the Himalaya of Central Nepal. Lithospheric deformation is calculated over a time scale of 100 kyr by a 2D finite element model that incorporates the rheological layering of the crust and the main features of the convergence across the range. For the upper boundary condition, two surface processes were tested: a linear diffusion model and a 1D1/2 integrative model including fluvial incision along the fluvial network and hillslope erosion by landsliding. Model results and their sensitivity to the chosen combinations of erosion law and crustal properties are discussed in light of the constraining geologic and geomorphologic observations. In contrast with the conclusions of Cattin and Avouac [2000] , where a compliant quartz-rich crustal rheology and diffusion law were required, we combine a composite quartz-diabase rheology for the crust with fluvial incision erosion law to account for erosion and elevation profiles across the Himalaya of Central Nepal. More generally, it is proposed that, because of the interplay between the dominant denudation conditions and the rheology of the crust, both well documented erosion rates and processes can provide significant constraints on crustal properties within an active orogen.
ISSN: 0094-8276

hal-00788697
https://hal.archives-ouvertes.fr/hal-00788697
https://hal.archives-ouvertes.fr/hal-00788697/document
https://hal.archives-ouvertes.fr/hal-00788697/file/godard_et_al.pdf
DOI : 10.1029/2004GL021006

Éditeur(s) : Gauthier-Villars
Résumé : The wind, temperature and current data collected during the joined French-USA FOCAL/SEQUAL programme carried in the equatorial Atlantic band in 1983 and 1984, allowed for the first time a simultaneous study of both the equatorial and coastal (5-degrees-N) upwellings along 4-degrees-W. At the equator, the decreases of both the surface temperature and the depth of the thermocline in boreal summer are correlated with the zonal component of the local windstress in the period band 1-2 months. This corresponds to the time required by the thermocline to lift up at 0-4-degrees-W in the presence of an easterly wind. The local wind cannot however explain the entire vertical variability of the thermal structure at 0-4-degrees-W. The correlation function shows in addition that the temperature there is highly correlated to the wind recorded at St Peter and St Paul Rocks (SPP) in the period band 0-2 months. This time scale is the one required by the Kelvin and Rossby waves to propagate along the equator through equatorial wave guide dynamics. The influence of these waves seems particularly important when considering the upward displacements of the thermocline both in February-March when the winds abruptly relax and in November-December when the wind at 0-4-degrees-W is southwesterly with no secondary negative maximum in the wind record at 1-degrees-N-29-degrees-W (SPP), contrary to the climatological wind field. The computation of the different terms of the heat equation applied to an homogeneous surface layer shows that the cooling is entirely due to vertical advection and eddy diffusion. The cooling would be more effective without the atmospheric heat flux and the horizontal advection of heat transported both by the South Equatorial Current at the surface and the southward current at the bottom of the mixed layer. At the coast, the amplitude and duration of the upwellings are not constant all along the coast: in boreal summer, they are maximum east of the two capes (Palmas and Three Pointes) while in winter the strength of the cooling is maximum in the east of Cape Palmas and then decreases eastward. The meridional slope of the thermocline off the coast concerns a distance which is much larger than the internal Rossby radius of deformation and is coherent with the latitudinal extension and intensity of the Guinea current both in summer and winter. In addition to this geostrophic adjustment, the upward tilt of the thermocline in summer is enhanced by the intensification of the component of the wind parallel to the coast. The application of a simple linear model forced with an eastward wind at that time explains the surface maximum cooling at the coast and the current distribution in both vertical and meridional directions. The two maxima of the zonal component of the Guinea current, in summer (main one) and in winter are in phase with the intensity of the vertical component of the windcurl. The application of the Sverdrup equations shows that the current speeds computed, for both seasons, are of the same order of magnitude as the speeds observed.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1991 , Vol. 14 , N. 3 , P. 223-240

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00101/21252/18865.pdf
http://archimer.ifremer.fr/doc/00101/21252/

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
The central part of the Gulf of Lions shoreline is characterized by many coastal wetlands that resulted from the interaction between a process of shoreline regularization by migrations of littoral barriers and a slow filling of the back-barrier areas by the riverine and marine inputs. Analyses of Late-Holocene deposits with a very high-resolution multi-proxy study of two sediment cores, allow us to reconstruct the evolution of this coastal system. Two main Holocene sediment units are identified overlying a Pliocene carbonate continental formation. The lower unit consists of sandy and pebbly marine sediments deposited around 7800 B.P., during the final stand of the last sea level rise. Just above, the upper unit displays lagoonal grey clay silts with shells and some intercalated layers of silty sands related to paleostorm events. The age model was established from radiocarbon dating, for the oldest part of the core. Over the last century, sedimentation rates were calculated using the CFCS Pb-210 model, together with Cs-137 data. Radiocarbon data show an increase in he accumulation rate from the base to the top of cores. Marine sand units related to the last transgressive deposit allow to refine the curve of Holocene post-glacial sea level rise. Sedimentological and faunal analyses associated with chronological data provide a means for reconstructing the Late-Holocene paleoenvironments along this part of the coast and suggest that the final closure of the coastal lagoon by the sandy barrier occurred at around 730 +/- 120 yr cal B.P. The beginning of this closure, together with the progradation of the coastal plain, could be responsible for the decline in economic activity of the Lattara harbour during the Roman period.
La partie centrale du littoral du golfe du Lion est caractérisée par de nombreuses lagunes qui résultent de l'interaction entre un processus de régularisation du trait de côte par migration de barrières littorales et d'un lent remplissage des zones situées en arrière des barrières par des apports continentaux et marins. Les analyses des dépôts tardi-holocènes avec une étude multi-traceurs à très haute résolution de deux carottes sédimentaires nous permettent de reconstruire l'évolution de ce système côtier. Deux unités sédimentaires holocènes sont identifiées recouvrant une formation pliocène carbonatée. L'unité inférieure est constituée de sables et de galets d'origine marine déposés vers 7800 B.P., durant les stades ultimes de la dernière remontée marine. Audessus, l'unité supérieure montre des dépôts d'argile et de silt gris coquilliers d'origine lagunaire, dans lesquels sont intercalés des niveaux de sable silteux révélant la présence d'événements de tempêtes. Le modèle d'âge est établi à partir de dates radiocarbones pour les parties les plus anciennes des archives sédimentaires, tandis que pour le dernier siècle, les taux de sédimentation sont calculés en utilisant le modèle CFCS pour le 210Pb, associé aux données de 137Cs. Les données 14C montrent une augmentation du taux d'accumulation depuis la base jusqu'en surface des carottes. Les unités de sables marins liées aux dépôts de la dernière transgression marine permettent de préciser la courbe post-glaciaire de remontée du niveau marin. Les analyses sédimentologiques et faunistiques associées aux données chronologiques fournissent une méthode permettant de reconstituer les paléoenvironnements littoraux tardi-holocènes dans la zone d'étude et suggèrent que la fermeture finale de ces lagunes par le cordon sableux survient autour de 730 ± 120 ans cal B.P. Le début de cette fermeture, associée à la une progradation deltaïque, pourrait être responsable du déclin des activités économiques du port de Lattara durant la période Romaine.
EISSN: 1777-5817

halshs-00740923
https://halshs.archives-ouvertes.fr/halshs-00740923
DOI : 10.2113/gssgfbull.181.1.27

Résumé : Ce travail porte sur l'inhibition de l'acier C38 en milieu acide HC1 1M par les extraits alcaloïdes issus de 2 plantes : aspidosperma album et geissospermum laeve. Biodégradables et respectueux de l'environnement, les alcaloïdes pourraient être utilisés temporairement pour prévenir la corrosion de l'acier C39 avec des taux d'inhibition supérieurs à ceux décrits dans la littérature. Dans la première partie du travail, l'influence de la concentration, du temps d'immersion et de la température sur le processus de corrosion de l'acier C38 en milieu HC1 1M en absence de polarisation et spectroscopie d'impédance électrochimique. Les analyses de surface effectuées par microscopie électronique a balayage montrent la présence d'une couche constituée d'un mélange d'oxyde de fer incorporant les alcaloïdes et qui conduit à la diminution de la vitesse de corrosion. La deuxième partie de ce travail a été consacrée à l'isolement des alcaloïdes des deux extraits afin de déterminer le ou les alcaloïdes responsables de l'activité inhibitrice et ainsi remonter aux mécanismes d’adsorption. Il a été montré que l'alcaloïde majoritaire des extraits est responsable de l'inhibition
This work is devoted to the corrosion inhibition of C38 steel in 1M HCL acid medium by alkaloids extracts from two plants : aspidosperma album and geissospermum laeve. Biodegradable and environmentally friendly, alkaloids could be used temporarily to prevent the corrosion of C38 steel with inhibition rates higher than those described in the literature. The first part of this work studies the influence of concentration, immersion time and temperature on the corrosion inhibitor by electrochemical measurements : polarization curves and electrochemical impedance spectroscopy. The surface analyses conducted by scanning electron microscopy showed the presence of a layer composed of an iron oxide mixture incorporating alkaloids extracts and which leads to the decrease of the corrosion rate. The second part of this work was devoted to the isolation of alkaloids of two extracts in order to determine the alkaloids responsible of the inhibitory activity and thus to determine the adsorption mechanisms. It was showed that the major alkaloids of two extracts is responsible of the inhibition activity

http://www.theses.fr/2013AGUY0578/document

Résumé : Three unburied ocean bottom seismometers (OBS) equipped with Trillium 240 s broad-band seismometers recorded spheroidal free oscillations of the Earth out to periods over 1000 s period, for the M = 8.1, April 1, 2007 Solomon Islands earthquake. In contrast to broadband observatories of the global network that operate in quiet continental locations, these instruments were dropped on the several-km thick layer of sediments of the forearc and accretionary wedge of the Lesser Antilles subduction zone. Furthermore, a high ambient noise level due to the ocean surface infragravity waves is expected to cover the frequency band of Earth's normal modes band when recorded at these sites. In spite of these hostile environmental conditions, the frequency of clearly defined peaks of the Earth's normal modes were measured after the earthquake. This suggests that the recording of normal modes and long period waves can be extended to parts of the hitherto inaccessible ocean with currently available OBS technology.
Geophysical Research Letters (0094-8276), 2011-12 , Vol. 38 , N. 24 , P. L24305

Droits : 2011 by the American Geophysical Union
http://archimer.ifremer.fr/doc/00185/29606/27971.pdf
DOI:10.1029/2011GL049533
http://archimer.ifremer.fr/doc/00185/29606/

Éditeur(s) : HAL CCSD Elsevier
Résumé : In this paper, we present optically and infrared stimulated luminescence (OSL and IRSL) ages for four samples from alluvial fan surfaces in the Astaneh Valley. This valley is located in the north-east part of the Alborz range in Iran. Our morphologic interpretations recognize at least three generations of fans in the study area, all of which have been displaced along the left-lateral strike-slip Astaneh fault. Because of the dry, loose, and sometimes complex juxtaposition of the target sediments, we collected the samples in total darkness beneath dark plastic layers placed atop the pit openings. Luminescence ages of the fans are similar to 55 ka, similar to 32 ka and similar to 16 ka. These ages are concurrent with periods of loess deposition and wet climatic conditions previously recorded in the Arabia-Iranian region. They allow estimation of a horizontal slip rate of similar to 2 mm/yr along the Astaneh fault, which is consistent with additional slip rates determined for the Holocene period along faults further west of the Astaneh fault.
ISSN: 1871-1014

hal-00617777
https://hal.archives-ouvertes.fr/hal-00617777
DOI : 10.1016/j.quageo.2011.03.001

Éditeur(s) : HAL CCSD Royal Society, The
Résumé : International audience
Although many coral reefs have shifted from coral-to-algal dominance, the consequence of such a transition for coral–algal interactions and their underlying mechanisms remain poorly understood. At the microscale, it is unclear how diffusive boundary layers (DBLs) and surface oxygen concentrations at the coral–algal interface vary with algal competitors and competitiveness. Using field observations and microsensor measurements in a flow chamber, we show that coral (massive Porites) interfaces with thick turf algae, macroalgae, and cyanobacteria, which are successful competitors against coral in the field, are characterized by a thick DBL and hypoxia at night. In contrast, coral interfaces with crustose coralline algae, conspecifics, and thin turf algae, which are poorer competitors, have a thin DBL and low hypoxia at night. Furthermore, DBL thickness and hypoxia at the interface with turf decreased with increasing flow speed, but not when thick turf was upstream. Our results support the importance of water-mediated transport mechanisms in coral–algal interactions. Shifts towards algal dominance, particularly dense assemblages, may lead to thicker DBLs, higher hypoxia, and higher concentrations of harmful metabolites and pathogens along coral borders, which in turn may facilitate algal overgrowth of live corals. These effects may be mediated by flow speed and orientation.
ISSN: 0962-8452

hal-01359387
https://hal-univ-perp.archives-ouvertes.fr/hal-01359387
DOI : 10.1098/rspb.2016.1137