Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We carried out detailed petrographic, major and trace element geochemical, microstructural and FTIR analyses on eight characteristic ultramafic xenoliths from Nyos and Barombi Mbo Lakes in the continental sector of the Cameroon Volcanic Line (CVL). The studied xenoliths are spinel lherzolites showing lithologies similar to the other xenoliths reported previously along the CVL. They have protogranular and porphyroclastic textures. One of the Barombi xenolith contains amphibole, which had not been previously reported in this locality. Amphibole is common in the Nyos xenoliths suite. Peridotite xenoliths from both localities show some chemical heterogeneity, but Barombi xenoliths generally are less depleted in basaltic elements with respect to Nyos xenoliths. Trace element compositions of Nyos spinel lherzolites show a moderately depleted initial (premetasomatic) composition and variable enrichment in REE. Evidence for both modal and cryptic metasomatism is present in Nyos xenoliths. Rare earth element patterns of clinopyroxene suggest that interaction between mafic melts and the upper mantle occurred beneath the Nyos locality. Barombi Mbo xenoliths, on the other hand, record a small degree of partial melting. The Barombi Mbo xenoliths have weak, dominantly orthorhombic olivine crystal preferred orientations, whereas Nyos ones have strong axial-[010] patterns, which may have formed in response to transpression. Nominally anhydrous mantle minerals (NAMs) of the Barombi Mbo xenoliths show generally higher bulk concentrations of ‘water’ (70–127 ppm) than Nyos xenoliths (32–81 ppm). The Barombi Mbo xenoliths could originate from a juvenile segment of the lithospheric mantle, which had been originally part of the asthenosphere. It became a part of the lithosphere in response to thermal relaxation following the extension, forming a weakly deformed lower lithospheric mantle region along the CVL. The Nyos xenoliths, however, represent a shallow lithospheric mantle bearing imprints of several depletion and enrichment events probably prior or following the extension (at ∼30 Ma).
ISSN: 0899-5362

hal-01236039
https://hal.archives-ouvertes.fr/hal-01236039
DOI : 10.1016/j.jafrearsci.2015.07.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The crust of the Paleoproterozoic West African Craton in northern Ghana is dominantly made of Tonalite-Trondhjemite-Granodiorite (TTG) suites, low-K to high-K calc-alkaline granites, with minor LILE-enriched diorites, and chemically related lavas. Results of zircon U-Pb dating indicate that all these different rock types were formed together over a prolonged period of ca. 100 Ma, between 2.21 and 2.11 Ga. Zircon Hf isotope compositions of five samples are supra-chondritic (εHft from +1 to +6) indicating that the granitoids derive from the reworking of juvenile crustal components as old as 2.60 Ga. Geochemical data show that the TTGs were derived from the reworking of a low-K mafic crust, while biotite granites formed by the reworking of older felsic crustal rocks, and diorites derived from the melting of LILE-enriched mantle sources.The combined datasets support a three-step model for the formation of the crust of the West African craton in northern Ghana: (1) a juvenile, mafic proto-crust was extracted from the depleted mantle between 2.60 and 2.30 Ga, in an oceanic environment remote from any pre-existing continental nucleus; (2) the mafic proto-crust was reworked in several primitive magmatic arcs or in accreted oceanic plateaux. Crustal reworking initially produced minor felsic magmatism between 2.35 and 2.21 Ga, followed by the 2.21–2.15 Ga emplacement of low- to medium-P TTG and K-rich calc-alkaline granitoid suites, and was coeval with the formation of an enriched mantle source. (3) Various proto-continental terranes collided during the Eburnean orogeny between 2.14 and 2.11 Ga, triggering intense reworking of the composite crust and mantle reservoirs formed in the previous two steps, i.e. remnants of the juvenile mafic crust, older TTGs and biotite granites, and previously enriched mantle sources. The emplacement of high-P TTGs, granites and LILE-enriched diorites resulted from lower crustal heating in response to the delamination of the lower crust and lithospheric mantle. The Eburnean collision therefore marks the final stages of a 200–500 Ma long period of juvenile continental crust formation and stabilisation. The datasets further reveal that the Paleoproterozoic West African Craton comprises a minimum of two distinct crustal blocks, with north-western Ghana lying at their interface.
ISSN: 0301-9268

hal-01467999
https://hal.archives-ouvertes.fr/hal-01467999
DOI : 10.1016/j.precamres.2016.10.011

Éditeur(s) : HAL CCSD
Résumé : International audience
Two opposing visions of the Aegean backarc tectonics implicitly contain contrasting images of the rheological behaviour of the lihosphere, supported by different sets of observations. The propagation of the NAF and extension in the Corinth Rift suggest a strongly localising rheology whereas the formation of MCC in the Cyclades and the Rhodope suggests instead a more viscous behaviour. This paradox was the seminal question addressed by the ANR-EGEO programme (2007-2010) that leads to the following conclusions: (1) The exhumation of the Cycladic MCC's is accommodated by the N-dipping North Cycladic Detachment System (NCDS) that partly reworks the Vardar suture and at the base by a series of thrusts, including the basal contact of the Cycladic Blueschists (CBS) over the Cycladic Basement (CB). The activity of LANF is due to the reactivation of pre-existing discontinuities such as thrusts or earlier detachments and much less to the interaction with granitic plutons. (2) Exhumation in the Cyclades has proceeded in two stages: (a) Eocene syn-orogenic exhumation within the subduction lower/upperplate interface while the post-orogenic Rhodope MCC formed further north, (b) Oligo-Miocene post-orogenic extension in an MCC mode coeval with syn-orogenic exhumation in Crete and the Peloponnese. (3) Both stages were associated with slab retreat, as early as the Eocene with an acceleration at 30-35 Ma. (4) The localisation of the presently active steeply-dipping normal faults on the southern margin of the Corinth Rift may have been preceded by a partial reworking of thrusts and syn-orogenic detachments by shallow-dipping decollements. (5) The localisation of the NAF in the Marmara Sea region and the Northern Aegean Sea is now accurately dated between 5.3 and 5 Ma Ma using the erosion and deposition surfaces that mark the Messinian salinity Crisis and nannofossils ages. (6) The formation of MCCs in the Cyclades resulted in the draining of the low viscosity lower crust from the northern Aegean Sea and led to an easier coupling between upper mantle and upper crust, easing the localisation and propagation of the NAF. (7) A comparison between crustal and mantle finite strain suggests that mantle flow due to slab retreat controls the stretching of the crust. Our model involves progressive slab retreat and mantle flow below the overriding plate inducing the observed succession of tectonic episodes with a progressive localisation of extension due to several slab tearing events. There is no paradox in the tectonic history and rheological behaviour of the Aegean lithosphere but an evolution of the kinematic boundary conditions due to slab deformation at depth.
American Geophysical Union
San Francisco, United States

insu-00860518
https://hal-insu.archives-ouvertes.fr/insu-00860518
BIBCODE : 2010AGUFM.T13G..04J

Éditeur(s) : HAL CCSD Springer
Résumé : International audience
In this study, we used data recorded by two consecutive passive broadband deployments on the Gulf of Aden northern margin, Dhofar region, Sultanate of Oman. The objective of these deployments is to map the young eastern Gulf of Aden passive continental margin crust and upper mantle structure and rheology. In this study, we use shear-wave splitting analysis to map lateral variations of upper mantle anisotropy beneath the study area. In this study, we found splitting magnitudes to vary between 0.33 and 1.0 s delay times, averaging about 0.6 s for a total of 17 stations from both deployment periods. Results show distinct abrupt lateral anisotropy variation along the study area. Three anisotropy zones are identified: a western zone dominated by NW-SE anisotropy orientations, an eastern zone dominat- ed with NE-SW anisotropy orientations, and central zone with mixed anisotropy orientations similar to the east and west zones. We interpret these shorter wavelength anisotropy zones to possibly represent fossil lithospheric mantle anisotropy. We postulate that the central anisotropy zone may be representing a Proterozoic suture zone that separates two terranes to the east and west of it. The anisotropy zones west and east were being used indicative of different terranes with different upper mantle anisotropy signatures.
ISSN: 1866-7411

hal-00647478
https://hal.archives-ouvertes.fr/hal-00647478
DOI : 10.1007/s12517-011-0477-2

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Detailed structural and petrological mapping in the Beni Bousera peridotite (Rif Belt, northern Morocco) shows that this orogenic peridotite massif is composed of four tectono-metamorphic domains with consistent kinematics, marked by a pervasive, shallowly dipping foliation with a NW-SE stretching lineation that progressively rotates towards a NNE-SSW orientation in the lowermost part of the massif. From top to bottom, these domains are garnet-spinel mylonites, Ariègite subfacies fine-grained porphyroclastic spinel peridotites, Ariègite-Seiland subfacies porphyroclastic, and Seiland subfacies coarse-porphyroclastic to coarse-granular spinel peridotites. Microstructures and crystal preferred orientations point to deformation dominantly by dislocation creep in all domains, but the continuous increase in average olivine grain size indicates decreasing plastic work rates from top to bottom. This evolution in deformation conditions is consistent with the change in synkinematic pressure and temperature conditions, from 900°C at 2*0 GPa in garnet-spinel mylonites to 1150°C at 1*8 GPa in the Seiland domain. A pervasive diffuse dunitic-websteritic layering subparallel to the foliation suggests deformation in the presence of melt in the Seiland domain. Gravitational instabilities owing to local melt accumulation may account for <200 m wide areas exhibiting a vertical lineation in this domain. To account for the consistent kinematics and the tectono-metamorphic evolution, which implies a temperature gradient of c. 125°C km−1 preserved across the Beni Bousera massif, we propose that the entire massif records the functioning of a low-angle shear zone, a few kilometres wide, which accommodated exhumation of the base of the lithosphere from ∼90 to ∼60 km depth. Partial melting in the Seiland domain may be explained by fast decompression of the footwall, without the need for exotic heat sources. Moreover, if the present-day orientation of the shear zone is similar to that when it was active in the mantle, the stretching lineations at high angle to the metamorphic gradient imply that shearing parallel to the trend of the belt accompanied thinning; that is, a transtensional deformation of the margin.
ISSN: 0022-3530

hal-00950056
https://hal.archives-ouvertes.fr/hal-00950056
DOI : 10.1093/petrology/egt067

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper provides a synthesis of current data and interpretations on the crustal structure of the Pyrenean-Cantabrian orogenic belt, and presents new tectonic models for representative transects. The Pyrenean orogeny lasted from Santonian (~84 Ma) to early Miocene times (~20 Ma), and consisted of a spatial and temporal succession of oceanic crust/exhumed mantle subduction, rift inversion and continental collision processes at the Iberia-Eurasia plate boundary. A good coverage by active-source (vertical-incidence and wide-angle reflection) and passive-source (receiver functions) seismic studies, coupled with surface data have led to a reasonable knowledge of the present-day crustal architecture of the Pyrenean-Cantabrian belt, although questions remain. Seismic imaging reveals a persistent structure, from the central Pyrenees to the central Cantabrian Mountains, consisting of a wedge of Eurasian lithosphere indented into the thicker Iberian plate, whose lower crust is detached and plunges northwards into the mantle. For the Pyrenees, a new scheme of relationships between the southern upper crustal thrust sheets and the Axial Zone is here proposed. For the Cantabrian belt, the depth reached by the N-dipping Iberian crust and the structure of the margin are also revised.The common occurrence of lherzolite bodies in the northern Pyrenees and the seismic velocity and potential field record of the Bay of Biscay indicate that the precursor of the Pyrenees was a hyperextended and strongly segmented rift system, where narrow domains of exhumed mantle separated the thinned Iberian and Eurasian continental margins since the Albian-Cenomanian. The exhumed mantle in the Pyrenean rift was largely covered by a Mesozoic sedimentary lid that had locally glided along detachments in Triassic evaporites. Continental margin collision in the Pyrenees was preceded by subduction of the exhumed mantle, accompanied by the pop-up thrust expulsion of the off-scraped sedimentary lid above. To the west, oceanic subduction of the Bay of Biscay under the North Iberian margin is supported by an upper plate thrust wedge, gravity and magnetic anomalies, and 3D inclined sub-crustal reflections. However, discrepancies remain for the location of continent-ocean transitions in the Bay of Biscay and for the extent of oceanic subduction. The plate-kinematic evolution during the Mesozoic, which involves issues as the timing and total amount of opening, as well as the role of strike-slip drift, is also under debate, discrepancies arising from first-order interpretations of the adjacent oceanic magnetic anomaly record.
ISSN: 0040-1951

insu-01683989
https://hal-insu.archives-ouvertes.fr/insu-01683989
https://hal-insu.archives-ouvertes.fr/insu-01683989/document
https://hal-insu.archives-ouvertes.fr/insu-01683989/file/teixell-tectono-2018.pdf
DOI : 10.1016/j.tecto.2018.01.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the framework of the Africa-Europe convergence, the Mediterranean system presents a complex interaction between subduction rollback and upper-plate deformation during the Tertiary. The western end of the system shows a narrow arcuate geometry across the Gibraltar arc, the Betic-Rif belt, in which the relationship between slab dynamics and surface tectonics is not well understood. The present study focuses on the Western Betics, which is characterized by two major thrusts: 1/ the Internal/External Zone Boundary limits the metamorphic domain (Alboran Domain) from the fold-and-thrust belts in the External Zone; 2/ the Ronda Peridotites Thrust allows the juxtaposition of a strongly attenuated lithosphere section with large bodies of sub-continental mantle rocks on top of upper crustal rocks. New structural data show that two major E-W strike-slip corridors played a major role in the deformation pattern of the Alboran Domain, in which E-W dextral strike-slip faults, N60 thrusts and N140 normal faults developed simultaneously during dextral strike-slip simple shear. Olistostromic sediments of Lower Miocene age were deposited and deformed in this tectonic context and hence provide an age estimate for the inferred continuous westward translation of the Alboran Domain that is accommodated by an E-W lateral (strike-slip) ramp and a N60 frontal thrust. The crustal emplacement of large bodies of sub-continental mantle may occur at the onset of this westward thrusting in the Western Alboran domain. At lithosphere-scale, we interpret the observed deformation pattern as the subduction upper-plate expression of a lateral slab tear and its westward propagation since Lower Miocene.
ISSN: 0040-1951

insu-01163695
https://hal-insu.archives-ouvertes.fr/insu-01163695
https://hal-insu.archives-ouvertes.fr/insu-01163695/document
https://hal-insu.archives-ouvertes.fr/insu-01163695/file/Frasca-2015.pdf
DOI : 10.1016/j.tecto.2015.05.017

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
[1] Statistical analysis of modern oceanic subduction zone parameters, such as the age of a downgoing plate or the absolute plate motions, is performed in order to investigate which parameter controls the dip of a slab and, conversely, what the influence of slab geometry is on upper plate behavior. For that purpose, parameters have been determined from global databases along 159 transects from all subduction zones that are not perturbed by nearby collision or ridge/plateau/seamount subduction. On the basis of tomographic images, slabs that penetrate through, or lie on, the 670 km discontinuity are also identified. The results of the statistical analysis are as follows: (1) Back-arc stress correlates with slab dip, i.e., back-arc spreading is observed for deep dips (deeper than 125 km) larger than 50°, whereas back-arc shortening occurs only for deep dips less than 30°. (2) Slab dip correlates with absolute motion of the overriding plate. The correlation is even better when the slab lies on, or even more penetrates through, the 670 km discontinuity. (3) Slabs dip more steeply, by about 20° on average, beneath oceanic overriding plates than beneath continental ones. (4) Slabs dip more steeply on average by about 10° near edges. (5) Slab dip does not correlate with the magnitude of slab pull, the age of subducting lithosphere at the trench, the thermal regime of the subducting lithosphere, the convergence rate, or the subduction polarity (east versus west). The present study provides evidence that the upper plate absolute motion plays an important role on slab dip, as well as on upper plate strain. Retreating overriding plates are often oceanic ones and thus may partially explain the steeper slab dips beneath oceanic upper plates. One can infer that low slab dips correlate well with compression in continental advancing upper plates, whereas steep dips are often associated with extension in oceanic retreating upper plates. Excess weight of old slabs is often counterbalanced by other forces, probably asthenospheric in origin, such as lateral mantle flow near slab edges or anchor forces, to determine slab dip. Components: 12,676 words, 13 figures, 1 table.
ISSN: 1525-2027

hal-01261567
https://hal.archives-ouvertes.fr/hal-01261567
https://hal.archives-ouvertes.fr/hal-01261567/document
https://hal.archives-ouvertes.fr/hal-01261567/file/lallemandG32005.pdf
DOI : 10.1029/2005GC000917

Éditeur(s) : HAL CCSD
Résumé : Subduction is one of the major geodynamical process active during the Earth evolution. The characterization of arc magmas, their evolution through space and time, and the relationship between arc magmatism and continental crust forming processes, constitute the main research topics in petrology and geochemistry since the last three decades. This study focuses on an exhumed portion of the Kohistan Arc (N Pakistan), which is an exceptional ‘in situ' laboratory to study and follow through time the processes active on subduction zones. Based on a pluri-geochemical approach, this study allows unraveling two major issues : 1/ The lack of a cogenetic relationship between the arc root (i.e. ultramafic rocks) and the overlying gabbroic crustal section. The Jijal ultramafic section does not bear a crustal origin and was emplaced at ~117 Ma via a magma-rock reaction between REE-depleted ‘boninite-like' melts and the pre-existing lithospheric mantle with Indian-MORB affinities; 2/ A three-stage geodynamical model covering the arc evolution through ~30 Ma. This model starts with the onset of the subduction followed by the building of the volcanic arc (1st stage). The 2nd stage corresponds to a major thermal event, characterized by abundant magma underplating and by granulitisation of the arc base. Recycling of the residual/cumulative lower crust into the convective asthenospheric mantle was efficient during this stage, and probably related to thermo-mechanical erosion processes. The last stage, between ~95 and 85 Ma, seals the end of the intra-oceanic subduction and corresponds to an “amagmatic” period. This step is followed by a voluminous, but short, magmatic pulse at ~85 Ma, occurring just before the arc-continent collision. At last, this study emphasizes the more mafic composition of the investigated crustal arc section when compared to the bulk continental crust. Nevertheless the arc section composition nicely fits with the lower continental crust average.
Les zones de subduction représentent des zones d'évolution clés dans la compréhension des processus géologiques majeurs actifs sur notre planète. En particulier, la caractérisation et l'évolution des magmas générés dans les zones d'arcs océaniques et la relation entre leur genèse et les processus de croissance crustale sont des axes primordiaux. Cette étude est focalisée sur la portion d'arc océanique exhumée du Kohistan (Nord Pakistan) qui constitue un laboratoire exceptionnel pour appréhender cette problématique. Basée sur une approche géochimique multi-méthodes (éléments majeurs et en trace, isotopes), cette étude a permis d'établir : 1/ l'absence de relation génétique directe entre les roches ultrabasiques de la racine de l'arc et la section crustale sus-jacente. La formation de la séquence ultrabasique de Jijal se produit à ~117 Ma via une réaction de type magma-roche entre des liquides de type boninitique (appauvris en terres rares), et le manteau lithosphérique de type MORB-Indien ; 2/ un modèle géodynamique en trois stades majeurs résumant l'évolution de l'arc océanique et de la subduction sur une période d'environ 30 Ma. Ce modèle débute par l'initiation de la subduction et la formation de l'arc volcanique s.s. (1er stade) ; le 2ème stade correspond à un évènement thermique majeur. Il est représenté par un sous-placage important de magmas et une granulitisation intense de la base de l'arc. Le recyclage de la croûte inférieure cumulative et résiduelle, dans le manteau sous-jacent, se produit durant cette étape vraisemblablement suite à des processus d'érosion thermo-mécanique. Le dernier stade, entre 95 Ma et 85 Ma, scelle la fin du fonctionnement de la zone de subduction et correspond à une période amagmatique suivie par une brève reprise du magmatisme avant la collision de l'arc après 85 Ma. Enfin, une modélisation numérique comparative avec la croûte continentale globale met en évidence la composition significativement plus basique de la croûte de l'arc insulaire du Kohistan. De fortes similitudes sont en revanche observées entre la section d'arc étudiée et la croûte continentale inférieure.
https://tel.archives-ouvertes.fr/tel-00437770

tel-00437770
https://tel.archives-ouvertes.fr/tel-00437770
https://tel.archives-ouvertes.fr/tel-00437770/document
https://tel.archives-ouvertes.fr/tel-00437770/file/thesedhuime.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Seismic anisotropy has been widely studied this last decade, particularly by measuring splitting of vertically propagating core shear waves. The main interest in this technique is to characterize upper mantle flow beneath seismic stations. On the other hand, the major restriction in this method is that a single station gives a single anisotropy measurement. Alternative methods have been developed in order to avoid this restriction. An accurate determination of upper mantle seismic anisotropy beneath a seismic station may allow one, by doing anisotropy correction, to characterize remote or deeper anisotropy. The Geoscope network is ideal for this purpose because it is composed of a large set (about 26) of high-quality, broadband seismometers globally distributed and because some of these stations have run for more than 10 years and most of them for more than 5 years. We selected about 100 events at each site, generally of magnitude (m b) > 6.0, and we performed systematic measurements of the splitting parameters (fast polarization direction φ and delay time δt) on SKS, SKKS, and PKS phases. Splitting on oceanic islands has been difficult to observe owing to the low quality of the signal but also perhaps owing to complex upper mantle structures beneath the stations. Station KIP (Kipapa, Hawaii) in the Pacific is the only oceanic Geoscope station with a clear anisotropy. We determined well-constrained splitting parameters for 10 of the 17 continental stations that may be explained by a single anisotropic layer. The poor correlation between fast polarization directions and the absolute plate motion together with the apparent incoherence between the plate velocities and the observed delay times suggest that a simple drag-induced asthenospheric flow alone fails to explain most of the observations. For some stations located on or near major lithospheric structures (TAM, Tamanrasset, Algeria, for instance), we observe a good correlation between fast polarization directions and regional structures. At station SCZ (Santa Cruz, California), we found clear variations of the splitting parameters as a function of the event backazimuth, compatible with two layers of anisotropy. Three stations (CAN (Canberra), HYB (Hyderabad, India) and SSB (Saint Sauveur Badole, France)) seem to be devoid of detectable anisotropy.
ISSN: 2169-9313

hal-01388830
http://hal.univ-reunion.fr/hal-01388830
http://hal.univ-reunion.fr/hal-01388830/document
http://hal.univ-reunion.fr/hal-01388830/file/Barruol_anisoGeoscope_JGR1999.pdf
DOI : 10.1029/1999JB900033

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Whole-rock concentrations of Se and Te were determined in 53 peridotite samples collected in orogenic bodies from the Eastern Pyrenees, including the Lherz massif (33 samples), the type-locality of Iherzolite. Orogenic Iherzolites tectonically emplaced into the continental crust escaped devolatilisation that may strongly alter concentrations of those volatile trace elements in basalt-hosted peridotite xenoliths. The Se and Te concentration ranges (<3.5-100.7 ppb; <1-11 ppb) are consistent with the few analyses of mantle samples yet available, yet extending to higher Se concentrations. In-situ analyses performed by LAM-ICPMS on base metal sulfides indicate that the Se budget is controlled by sulfides whereas a large fraction of Te (50 +/- 30%) does not reside in sulfides. The missing fraction is accounted for by fractional crystallization of Pt-Pd tellurides from Cu-Ni sulfide melts. A maximum of one third of the S budget of Eastern Pyrenean peridotites was added by assimilation of crustal sulfides, which crystallized as pyrite. Disregarding those contaminated samples, some features of the Se and Te systematics (e.g. bivariate plots vs. fertility index) cannot be explained by partial melting processes. The best fit for 33 peridotites (mostly from Lherz) yields higher than chondritic S/Se (3.1213 +/- 500; r(2) = 0.96) for near chondritic Se/Te (8.6 +/- 2; r(2) = 0.9). Our study suggest that such superchondritic S/Se ratios are better explained by petrogenetic processes involving refertilization of harzburgitic lithosphere by metal (Cu,Ni)-rich sulfide melts precipitated along with clinopyroxene and Al-spinel from silicate melts en-route to the surface.
ISSN: 0009-2541

hal-00544577
https://hal.archives-ouvertes.fr/hal-00544577
DOI : 10.1016/j.chemgeo.2010.09.007

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We performed forward modelling of seismic anisotropy beneath a migrating strike-slip plate boundary to: (1) test if such a geodynamic context might explain teleseismic shear wave splitting data in the vicinity of the central part of the San Andreas Fault and (2) constrain the power of such data to unravel vertical and lateral variations in deformation patterns in the upper mantle. The modelling involves five steps: (1) thermomechanical modelling, using a finite-element code, of the deformation field, (2) viscoplastic self-consistent modelling of the resulting olivine and pyroxene crystal preferred orientations, (3) calculation of the elasticity tensors for different domains of the finite elements (FEs) model, (4) forward modelling of seismic wave propagation through the model using ray theory, finite-frequency theory and a full-wave approach and (5) performing splitting measurements on the synthetic seismograms. SKS splitting data in central California are best fitted by a model with a hotter geotherm within 60 km of the plate boundary accounting for the opening of an asthenospheric window due to the northward migration of the Mendocino Triple Junction. The westward motion of the plate boundary cannot however explain the rotation of fast polarization directions east of the San Andreas Fault in central California. Comparison between modelled and measured individual shear wave splitting also implies that the homogeneity of the two-layer models accounting for the observations in the vicinity of the San Andreas Fault indicates a sharp transition between lithospheric and asthenospheric deformations beneath this plate boundary. The ability of different synthetic approaches to localize horizontally and vertically the plate boundary-related deformation differs significantly. Splitting in ray theory synthetics closely follow variations in olivine crystallographic preferred orientations in the model. In contrast, splitting analysis on full-wave synthetics, which should be more representative of actual long-period SKS waves, results in smooth apparent lateral variations of anisotropy; the exact location and width of the plate boundary may only be retrieved by comparing fast-polarization profiles obtained using a multichannel analysis on waves with different periods.
ISSN: 0956-540X

hal-01236150
http://hal.univ-reunion.fr/hal-01236150
http://hal.univ-reunion.fr/hal-01236150/document
http://hal.univ-reunion.fr/hal-01236150/file/Bonnin_San_Andreas_modelling_GJI2012.pdf
DOI : 10.1111/j.1365-246X.2012.05650.x

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Continental rifts and passive continental margins show fundamental along-axis segmentation patterns that have been attributed to one or a number of different processes: extensional fault geometry, variable stretching along strike, preexisting lithospheric compositional and structural heterogeneities, oblique rifting, and the presence or absence of eruptive volcanic centers. The length and width scales of the rift stage fault-bounded basin systems change during the late evolution of the new plate boundary, and the role of magmatism may increase as rifting progresses to continental rupture. Along obliquely spreading ridges, first-order mid-ocean ridge geometries originate during the synrift stage, indicating an intimate relationship between magma production and transform fault spacing and location. The Gulf of Aden rift is a young ocean basin in which the earliest synrift to breakup structures are well exposed onshore and covered by thin sediment layers offshore. This obliquely spreading rift is considered magma-poor and has several large-offset transforms that originated during late stage rifting and control the first-order axial segmentation of the spreading ridge. Widely spaced geophysical transects of passive margins that produce only isolated 2-D images of crust and uppermost mantle structure are inadequate for evaluation of competing rift evolution models. Using closely spaced new geophysical and geological observations from the Gulf of Aden we show that rift sectors between transforms have a large internal variability over short distances (∼10 km): the ocean-continent transition (OCT) evolves from a narrow magmatic transition to wider zones where continental mantle is probably exhumed. We suggest that this small-scale variability may be explained (1) by the distribution of volcanism and (2) by the along-strike differences in time-averaged extension rate of the oblique rift system. The volcanism may be associated with (1) the long-offset Alula-Fartak Fracture Zone, which may enhance magma production on its younger side, or (2) channeled flow from the Afar plume material along the newly formed OCT and the spreading ridge. Oblique extension and/or hot spot interactions may thereby have a significant control on the styles of rifting and continental breakup and on the evolution of many magma-poor margins.
ISSN: 1525-2027

hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866/document
https://hal.archives-ouvertes.fr/hal-00504866/file/G3-Leroy_al-2010.pdf
DOI : 10.1029/2009GC002963

Éditeur(s) : HAL CCSD University of Chicago Press
Résumé : International audience
Contrasting tectonic reconstructions of the westernmost Mediterranean have been proposed to explain the origin of the Alboran marine basin contemporaneously with Cenozoic convergence between the African and European plates. Cr-rich pyroxenites in the Ronda massif record the geochemical processes occurring in the subcontinental mantle of the Alboran domain in the Late Oligocene, thus constraining the geodynamic scenario of Cenozoic extension in the western Mediterranean lithosphere. Clinopyroxene in intrusive Cr-rich websterite dikes crosscutting the Ronda peridotite is strongly depleted in Nb-Ta and enriched in light rare earth elements, as typically observed in arc magmas, and is in trace element equilibrium with Neogene subduction-related lavas from the western and central Mediterranean. Sr-Nd-Pb radiogenic isotopes indicate that the mantle source of the Ronda pyroxenite dikes was contaminated by a subduction component released by detrital sediments likely deposited in passive continental margins. Rather than convective removal or delamination of the lithospheric root, our data strongly support Alboran geodynamic models that envisage slab rollback as the tectonic mechanism responsible for the Miocene lithospheric thinning. The Ronda Cr-rich pyroxenite dikes represent the earliest unambiguous manifestation of subduction-related magmatism in the western Mediterranean and testify to the involvement of terrigenous sediments in the primitive stages of subduction.
ISSN: 0022-1376

hal-00745853
https://hal.archives-ouvertes.fr/hal-00745853
DOI : 10.1086/663875

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Ronda peridotite supplies one of the best objects to document subcontinental mantle deformation, but its internal deformation and exhumation mechanisms remain controversial. Here we provide new structural data and numerical results that constrain the Oligocene-Miocene deformation history of the Ronda massif. We first describe a mantle shear zone in the northern massif that developed subcrustal strain localization during decompression and related partial melting. The deformation regime of this mantle shear zone evolved from penetrative NE-SW stretching to sinistral shear highlighted by discrete shear bands. We then show structural observations that document a viscous deformation in the southern massif occurring prior to the thrust-assisted emplacement of the peridotite during large decompression. Finally, we performed numerical investigations that quantify a high temperature of 980°C for the basal peridotite lens at the time of its crustal emplacement. Our numerical results constrain the timing of ductile deformation of the peridotite just before 22 Ma, probably between 30 and 22 Ma. Altogether, these features led us to conclude that the deformation and exhumation of the Ronda peridotite results from lithosphere thinning subsequently inverted in the course of the Oligocene-Miocene. Among available models, our findings support the hypothesis of peridotite exhumation by the inversion of a thinned back-arc continental lithosphere during westward slab rollback through the Alboran region.
ISSN: 0278-7407

insu-00924180
https://hal-insu.archives-ouvertes.fr/insu-00924180
https://hal-insu.archives-ouvertes.fr/insu-00924180/document
https://hal-insu.archives-ouvertes.fr/insu-00924180/file/tect20062.pdf
DOI : 10.1002/tect.20062

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present new Sr-Nd-Pb isotope data of the western Alpujárride metamorphic basement and the pre-Miocene Flysch sediments of the Betic Cordillera (southern Spain). Nd model ages are consistent with an increasing detrital input from the Alborán domain to the Flysch Trough in the western Mediterranean during the late Oligocene. The Alpujárride metamorphic crustal rocks derived from Archean-Paleoproterozoic terranes located along the northern margin of Gondwana in the Neoproterozoic. The heterogeneous isotopic signatures of the Alpujárride units indicate that they have different sedimentary protoliths and underwent contrasted Variscan and pre-Variscan tectono-magmatic evolutions. Melts/fluids derived from the western Alpujárride gneisses contaminated the mantle source of the Ronda high-Mg pyroxenite dykes, implying that the Alpujárride lower crust underthrusted the subcontinental lithospheric mantle of the Alborán domain generating subduction-like magmatism in the late Oligocene. The western Alpujárride upper crust is involved in the Neogene volcanism of the Alborán Sea basin, but only contaminated some LREE-enriched calc-alkaline lavas erupted along the continental margins. On the other hand, tholeiitic lavas in the center of the basin show no isotopic evidence of crustal assimilation. This indicates that most of the crust in the central Alborán Sea accreted by Miocene tholeiitic magmatism and that Alpujárride lower crust is absent and likely foundered close to the continental margins of the basin.
ISSN: 0024-4937

hal-01526912
https://hal.archives-ouvertes.fr/hal-01526912
DOI : 10.1016/j.lithos.2016.10.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Splitting of teleseismic shear waves has been measured in the Appalachians (eastern USA) and the Pyrenees (western Europe) using data recorded by permanent and portable stations. From a comparison of the results, it appears that an interpretation of the recorded seismic anisotropy in terms of geodynamics is not straightforward. Successive geodynamic events have generated structures that may have resulted in a similar pattern of mantle flow and that therefore may have contributed in the development of the recorded anisotropy. Combining geological and geophysical arguments, it appears that the mantle anisotropy measured across the Appalachians and the Pyrenees may not be systematically Appalachian or Pyrenean in age but may be mainly due to a lithospheric structure formed during earlier major tectonic events, i.e. the Grenvillian and the Hercynian orogenies, respectively. We suggest that during major episodes of continent assembly, a pervasive tectonic fabric is developed in the lithospheric mantle. In the subsequent evolution of the continent, this fabric may induce a significant mechanical anisotropy that will drastically influence the mechanical behaviour of the Iithosphere when submitted to new tectonic events.
ISSN: 0031-9201

hal-01389717
http://hal.univ-reunion.fr/hal-01389717
http://hal.univ-reunion.fr/hal-01389717/document
http://hal.univ-reunion.fr/hal-01389717/file/Vauchez_Barruol-PEPI96_hal.pdf
DOI : 10.1016/0031-9201(95)03125-1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Geochronological studies of samples from continuous crustal sections of fossil intra-oceanic arcs are paramount for determining the precise timing of major processes that took place during the building of an oceanic island-arc crust. In this study, laser ablation ICP-MS U-Pb zircon (and conventional Rb-Sr) analyses pinpoint the timing of major events responsible for crustal growth of the Kohistan paleo-island arc (Northern Pakistan). Inheritance in magmatic rocks is evidence for recycling of intra-arc material and indicates that the Kohistan arc may have formed as early as 135 +/- 4 Ma. One older inherited grain indicates that the arc developed on a young oceanic lithosphere whose remnants include a c. 175 Ma old component. An interesting consequence is that intra-oceanic arc magmas can yield inherited zircons, which can be much older than the arc system itself without requiring recycling back into the mantle by subduction processes. In the case of the Kohistan arc, ante-arc Neotethys oceanic lithosphere was tapped by arc magmas during their way upward into the arc crust. The oldest magmatic ages measured in this study fall in the range 101-102 Ma (100.9 +/- 0.6 and 102.1 +/- 0.4 Ma). This period corresponds to arc build-up and thickening of the arc crust. Leucogranitic melts dated at 89.9 +/- 0.4 Ma and 90.9 +/- 1.0 Ma are considered as produced by dehydration/melting reaction accompanying granulitisation of the thickened lower arc crust. A maximum age for this event is 97.7 +/- 0.7 Ma, the age of emplacement of a garnet meta-tonalite affected by granulite facies metamorphism. Magmatic activity was still ongoing during and after the granulitisation as testified by emplacement of a diorite and a gabbro dated at 89.1 +/- 0.6 and 88.2 +/- 0.9 Ma respectively. The upper part of the metaplutonic sequence contains diorite samples dated at 84.6 +/- 0.5 Ma and 84.3 +/- 0.5 Ma and as young as 81.1 +/- 0.7 Ma. During this period, and based on the present day outcropping sequences, the mean crustal growth rate varied from 32 to 65 km(3)/km/Ma (volume per unit width along the strike of the arc) which is comparable to the range for present day arcs of the Western Pacific region. The correspondence of crustal growth rates observed for present-day island arcs and the good preservation of the crustal section in the Kohistan arc, make this area an exceptional natural laboratory to study arc related processes and to check models of continental crust formation by arc accretion.
ISSN: 0012-821X

hal-00644555
https://hal.archives-ouvertes.fr/hal-00644555
DOI : 10.1016/j.epsl.2011.07.016

Éditeur(s) : HAL CCSD Elsevier
Résumé : In situ analysis of major elements, platinum-group elements and Os isotope composition data for 170 grains of Ru–Os–Ir alloys from podiform chromitites in the Luobusa and Dongqiao ophiolites, Tibet, provide new constraints on the sources of the alloy grains, the Os-isotope composition of the Neo-Tethyan oceanic upper mantle, and the timing of melt–rock reactions in the ultramafic peridotites of the host ophiolites. Most alloy grains are osmiridium and iridosmine. Based on elemental and isotopic compositions, two populations can be identified. Group I, found in both ophiolite bodies, has fractionated PGE patterns typical of alloys and homogeneous 187Os/188Os 0.12645 ± 4 (2s; n = 145). Group II alloys from the Dongqiao ophiolites show smooth PGE patterns and 187Os/188Os ranges from 0.12003 to 0.12194 (yielding Re-depletion ages ≥ 1.1 Ga). Both the PGE patterns and the Os isotopic compositions of Group II resemble those of sulfides residual after melting. Group I alloys represent an early cumulate phase during the crystallization of magmas and are interpreted as derived from an asthenospheric melt. In contrast, Group II alloys are inferred to derive from the breakdown of residual sulfides from the mantle section of the ophiolite, which may represent relics of a sub-continental lithospheric mantle. The coexistence of the two groups of alloys in Dongqiao samples reflects interaction between asthenosphere-derived melts and old depleted lithospheric mantle and suggests that the chromitites originated through melt–rock reactions. The data on the Group I alloys support the hypothesis that the Re–Os evolution of the convective oceanic mantle resembles that of enstatite chondrites.
ISSN: 0012-821X

hal-00404967
https://hal.archives-ouvertes.fr/hal-00404967
DOI : 10.1016/j.epsl.2007.05.044

Éditeur(s) : HAL CCSD
Résumé : International audience
At the time of the collision with India (55Ma), the southern margin of Asia was a composite continental domainresulting from an already long history of successive accretions of different terranes having different rheologies.Knowledge about the structure, composition and thermal state of the Tibetan lithosphere through time is thusfundamental to understand the respective contributions of pre-Cenozoïc and Cenozoïc tectonics in the building ofthe Plateau to its present-day elevations.We focused on the boundary between the Qiangtang terrane to the south, and the Songpan-Ganze terrane to thenorth.We jointly studied deep crustal xenoliths and associated (ultra-)potassic magmatism from the Eocene basinsof Nangqian and Xialaxiu (Qinghai Province, China), north of the Qiangtang terrane. The aims were to retrievethe composition and the thermal state of the lower crust during Eocene times, to study the behavior of the lowercrust and lithospheric mantle of the Eastern Qiangtang terrane and the adjacent Songpan-Ganze terrane at the timeof the collision, and the link with the magmatic activity.Crustal xenoliths are of two types: biotite-rich, amphibole bearing metasediments; and garnet-bearing quartzofeldspathicgneisses. Such assemblages are typical of very high-grade amphibolite and granulite faciesmetamorphism; further study should allow us to quantify the pressures and temperatures those rocks experienceduntil the time they were sampled by their host lavas.Major element geochemistry places the c.a. 51-49 Ma (Spurlin et al., 2005) Xialaxiu volcanic field in a fairlydifferentiated (SiO265-70 wt%) high-K field of the calc-alcaline series. Trace element analysis suggests a strongcrustal contamination of the primary mantellic melts. C.a. 38-37 Ma (Spurlin et al., 2005) Nangqian magmaticbodies span across the alkaline series, with high to extreme (K2O6wt%) values. Complex major and traceelement patterns, coupled with high-resolution microprobe data on pyroxene xenocrysts, suggest that enrichmentoccurred at the source by metasomatism of the lithospheric mantle.Further work will precise which mechanisms could have accounted for such a metasomatism of the mantle beneaththe Northern Qiangtang terrane during Eocene, and whether the lower crust had an autochtonous or allochtonousnature.
Geophysical Research Abstracts
Vienne, Austria

insu-01308919
https://hal-insu.archives-ouvertes.fr/insu-01308919