Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
In this paper, a combined approach of geomorphic analyses, detailed geological mapping on SPOT 5 satellite images and field surveys, complemented by radiometric dating (Ar-40/Ar-39) allows proposing a new and consistent tectonic configuration for the northeastern Arabia-Eurasia collision zone. It favors a simple strike-slip faulting mechanism in NE Iran accommodating the northward motion of central Iran with respect to Eurasia between the Binalud and Kopeh Dagh mountains. Our results demonstrate that similar to 2 mm/a (similar to 25%) of this northward motion has been transferred from the Binalud to the Kopeh Dagh through the Meshkan Transfer Zone since similar to 5 Ma. The modern state of stress deduced from fault kinematics analyses shows N30 degrees E trending maximum stress axis and confirms a dominant strike-slip faulting mechanism. Combining our geological data with other available data, we conclude that kinematics of deformation can be appropriately described by rigid block faulting in NE Iran; instead, the continuous deformation as it has been thought during the last 3 decades.
ISSN: 0278-7407

hal-00420909
https://hal.archives-ouvertes.fr/hal-00420909
DOI : 10.1029/2008TC002444

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : New radiolarian assemblages of Late Jurassic age were extracted from seven chert localities of the basement comp ex of La Desirade Island (Guadeloupe), the oldest geological unit of the Lesser Antilles arc and the eastern Caribbean region. These fauna range in age from Kimmeridgian or early Tithonian to early or early late Tithonian, showing that La Desirade cherts are not all coeval, contrary to what was established by previous studies. Furthermore, the close spatial association of cherts and volcanic elements composed of basaltic flows and volcaniclastics suggests a mixed setting of hydrothermal siliceous deposits and biogenous sedimentation consistent with an arc-related oceanic setting rather than an ophiolite-type oceanic crust. As the Youngest age is obtained to the northwest of the basement complex where as older data are found to the southeast, it also Suggests that La Desirade basement complex may have undergone some structural stacking consistent with an accretion-type geodynamic getting. Our biochronological data provide a preliminury try tectonic model of an eastward subduction zone for Lesser Antilles arc basement emplacement during the Mesozois.
EISSN: 1777-5817

hal-00445252
https://hal.archives-ouvertes.fr/hal-00445252
DOI : 10.2113/gssgfbull.180.5.399

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The volume comprises some of the contributions presented during the 10th edition of the Alpine Meeting "CorseAlp 2011". It has been held in Saint Florent (Corsica) between 10th and 16th of April 2011 under the auspices of Societé Geologique de France, Società Geologica Italiana and the INGV (Istituto Nazionale di Geofisica e Vulcanologia) and with the collaboration of colleagues of Université de Corse (M.-M. Spella, M. and J. Ferrandini and L. Ciancaleoni) and the support of the city council of S. Florent. The meeting was framed in the series of "Alpine Workshops" e.g., Siegesmund et al. (2008), Handy and Rosenberg (2011), which are held every two years to develop interdisciplinary research on Alpine-type orogens. It hosted a variety of topical sessions from regional geology to process-oriented field and laboratory studies and gave the opportunity to collect multidisciplinary and multiscale approaches to geodynamic studies including continental rifting and ocean opening, oceanic and continental subduction, late- to post orogenic extension, exhumation of deep seated rocks, back-arc opening and microcontinent rotation, interfering orogenic-scale tectonics and surface processes, tectonics and seismic hazard within the Alpine chain and Mediterranean realms.
ISSN: 0040-1951

hal-00795580
https://hal.archives-ouvertes.fr/hal-00795580

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present the 1998-2009 GPS-derived velocity field for the Armenia region based on a survey-mode observation network of 31 GPS sites.We combine our results with previous GPS studies of the region to better assess the deformation of the Lesser Caucasus and Kura basin region. The results show that the Kura basin and the Lesser Caucasus regions are two different blocks, and that the main fault (Pambak-Sevan-Sunik) between these two regions has a right-lateral slip rate of 2±1 mm/yr. This is consistentwithmorphotectonic estimates and suggests a fairly constant slip rate over the last 120-300 ka. The right-lateral slip rate on one of the southern branch of the Pambak-Sevan-Sunik fault is lower than 1 mm/yr and the good agreementwith a geologically estimated slip rate suggests a constant slip rate over the last 1.4 Myr. The Sardarapat and Akhurian faults experience some shortening. This shortening is consistentwith someindependent geological estimates and shows the Arabian push.However, NNW-SSE-orientated faults have an extensional fault normal component instead of the expected shortening due to the Arabia-Eurasia convergence. This substantial extensive strain, and the sharp azimuth change of the velocity vectors between the Arabia promontory and the Lesser Caucasus suggest that processes other than "extrusion", possibly related to old subduction or delamination, contribute to the geodynamics of the region.
ISSN: 0040-1951

hal-00812623
https://hal.archives-ouvertes.fr/hal-00812623
DOI : 10.1016/j.tecto.2013.02.002

Éditeur(s) : HAL CCSD
Résumé : International audience
The porosity (from values of <1% up to more than 50%, with a mean value of 36.5%) and permeability (from very low values to 20.4 D, with a mean value around 800 mD) of 38 plugs, with a diameter 40 mm, have been measured. These plugs were taken approximately every 1.5 m along a 100 m-long core, sampling a series of reefal carbonate platform lithofacies. A non-unique relationship between porosity and permeability is obtained. In addition, the porosity was measured from processing X-ray micro-tomography images with resolutions ranging from 0.42 to 190.0 µm and sampling volumes ranging from less than 1 µm3 to few cm3. Depending on the structure of the pore network, the computed porosity is, in some cases, controlled by the X-ray image resolution and the sampled volume. While high resolution is required to image micro-porous material, large samples with lower resolution images are necessary for identifying distributed vugs and millimetre-scale structures. This study shows that multi-resolution X-ray micro-tomography is an effective tool for characterizing the multi-scale pore structure of carbonate rocks and understanding how it may control key petrophysical parameters such as porosity and permeability.
Geological Society Special Publication

hal-01174157
https://hal.archives-ouvertes.fr/hal-01174157
DOI : 10.1144/SP406.12

Éditeur(s) : HAL CCSD Royal Society of Chemistry
Résumé : International audience
Low-level water measurements of geological materials are fundamental in understanding the volatile inventories of the Earth from the mantle to crustal reservoirs. Here we describe the development of microanalytical techniques using the new SHRIMP SI ion microprobe to measure the abundances of OH− (as a proxy for water) in volcanic glass and nominally anhydrous minerals (NAMs). Samples were first analysed at the Carnegie Institute of Washington (CIW) on their Cameca ims-6f with calibrations based on previous FTIR and manometry analyses. SHRIMP SI is a large geometry ion microprobe and is currently mainly used for O and S isotope analyses. The analytical protocol used here incorporates multiple collection of 16O− and 16O1H− allowing rapid measurements. A single calibration line incorporating all glasses and NAMs for the SHRIMP SI allows calibration of 16O1H−/16O− to H2O over a wide range in concentration (50 to 15 000 ppm H2O). This calibration line has around a 10% uncertainty, which appears to be limited only by sample heterogeneity. The current background for SHRIMP analysis is between 20–40 ppm but this is expected to improve with improved pumping on the source chamber. A current limitation to water analysis of NAM samples, by any technique, is having a range of standard materials to enable OH− calibration to absolute H2O concentrations. Data are presented for 7 NAM samples (2 olivines, 2 orthopyroxenes and 3 clinopyroxenes) that appear to be promising as potential standards for international laboratory H2O measurements. These NAM samples have been analysed and characterised here by SHRIMP SI, FTIR, EMP and the Cameca ims-6f ion microprobe at CIW. Four of these samples have previously been measured by manometry to determine absolute H2O concentrations.
ISSN: 0267-9477

hal-01243514
https://hal.archives-ouvertes.fr/hal-01243514
DOI : 10.1039/c5ja00047e

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A laser ablation ICP-MS U-Pb age of 17.84 +/- 0.12 Ma (late Burdigalian) was obtained from monazites separated from a leucocratic diatexite collected in close proximity to a small peridotite massif incorporated into the lower crustal sequence of the Edough Massif (north-eastern Algeria), a southern segment of the peri-Mediterranean Alpine Belt. Monazites extracted from a neighbouring deformed leucogranite intruding early Paleozoic phyllites yield a consistent age of 17.4 +/- 1.3 Ma. Zircons occurring in the same leucogranite, with magmatic characteristics, have an age of 308 +/- 7 Ma interpreted as dating magmatic crystallisation of the leucogranite and reflecting partial melting during the Hercynian orogeny. Low Th/U domains (Th/U<0.10) from the same grains substantiate recrystallisation during a younger metamorphic event whose upper age limit is 286 +/- 11 Ma. These results emphasize the polycyclic evolution of basement rocks preserved in the crystalline units of the western Mediterranean and indicate that part of their metamorphic features were inherited from older, Hercynian, events. Taken together with published Ar-Ar dates, the late Burdigalian age of monazites indicates a rapid cooling rate of c. 370 degrees C/Ma and is regarded as closely approximating the emplacement of the peridotites into the Hercynian basement. The monazite ages are significantly younger than those recorded for orogenic peridotites from the Betic-Rif oroctine and for the timing of lithospheric extension forming the Alboran sea. It is also younger than rifting and back-arc extension opening the Liguro-Provencal basin. The late Burdigalian age is interpreted as dating the incipient rifting event that opened the Algerian basin, which is consequently not a continuation of the Liguro-Provencal basin. At the scale of the western Mediterranean, these observations concur with current models supporting slab roll-back and an eastwards migration of extension in the western Mediterranean, but suggest that the Algerian basin opened as a result of torsion and stretching of the Thethyan slab due to its steepening under the Alboran microplate.
ISSN: 0009-2541

hal-00424511
https://hal.archives-ouvertes.fr/hal-00424511
DOI : 10.1016/j.chemgeo.2008.11.016

Éditeur(s) : HAL CCSD
Résumé : Corsica is located in the Mediterranean sea, about 90 km from the Italian coast of Tuscany and 175 km from the French Riviera. This relatively large island stretches for 180 km in the north-south direction and 85 Km east-west. The rugged landscape, with a mean elevation of ca. 500 m and the highest point at 2710 m (Monte Cinto) is interrupted only by a major plain along the east coast. CorseAlp 2011 was held in April 2011. A link to the website is here: CorseAlp 2011. The CorseAlp field trips were designed to introduce the participants to the general features of the geology of Alpine Corsica and to recent specific discoveries. Field trip 1 focused on the geology of the Ocean-Continent Transition preserved in the Monte San Petrone, in Central Corsica, which was subducted to eclogite facies conditions during the Alpine orogeny. The three days post-workshop field trip (Field trip 2) focused on the general architecture of Alpine Corsica in an EW transect between the Balagne region and Bastia. The main topics of Field trip 1 and 2 allow discussion about the overall evolution of Alpine Corsica in the framework of Mediterranean geodynamics, with a focus on the most controversial aspects.
Journal of the Virtual Explorer

hal-00688965
https://hal.archives-ouvertes.fr/hal-00688965

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Both oedometric and plane-strain tests were performed with parallelepipedic samples made of synthetic granular, cohesive, frictional and dilatant rock analogue material GRAM2. For the first time parallel sets of fractures that have all the characteristics of natural joints were reproduced in the laboratory. The fractures are regularly spaced, normal to σ3, and have plumose morphology very similar to that of natural joints. These fractures can form at tensile stress σ3 much smaller in magnitude than the tensile strength of material and even at slightly compressive σ3. When mean stress σ exceeds a certain value, the fractures become oblique to σ1 (the obliquity increases with σ), forming networks of conjugate shear bands/fractures. These results of plane-strain experiments are in good agreement with those of better controlled conventional axisymmetric tests on a similar material in Chemenda et al. (2011b) and are closer to real geological situations. Both types of experiments are complementary. Their results lead to the conclusion that at least certain categories of natural fractures (including joints, and conjugate shear fractures/bands) were initiated as deformation localization bands. The band orientation is defined by the constitutive properties/parameters (notably the dilatancy factor) that are sensitive to σ.
ISSN: 0040-1951

hal-00795555
https://hal.archives-ouvertes.fr/hal-00795555
DOI : 10.1016/j.tecto.2011.11.021

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Over the last decades, numerous studies have emphasized the role of serpentinites in the subduction zone geodynamics. Their presence and role in subduction environments are recognized through geophysical, geochemical and field observations of modern and ancient subduction zones and large amounts of geochemical database of serpentinites have been created. Here, we present a review of the geochemistry of serpentinites, based on the compilation of ~ 900 geochemical data of abyssal, mantle wedge and exhumed serpentinites after subduction. The aim was to better understand the geochemical evolution of these rocks during their subduction as well as their impact in the global geochemical cycle. When studying serpentinites, it is essential to determine their protoliths and their geological history before serpentinization. The geochemical data of serpentinites shows little mobility of compatible and rare earth elements (REE) at the scale of hand-specimen during their serpentinization. Thus, REE abundance can be used to identify the protolith for serpentinites, as well as magmatic processes such as melt/rock interactions before serpentinization. In the case of subducted serpentinites, the interpretation of trace element data is difficult due to the enrichments of light REE, independent of the nature of the protolith. We propose that enrichments are probably not related to serpentinization itself, but mostly due to (sedimentary-derived) fluid/rock interactions within the subduction channel after the serpentinization. It is also possible that the enrichment reflects the geochemical signature of the mantle protolith itself which could derive from the less refractory continental lithosphere exhumed at the ocean-continent transition. Additionally, during the last ten years, numerous analyses have been carried out, notably using in situ approaches, to better constrain the behavior of fluid-mobile elements (FME; e.g. B, Li, Cl, As, Sb, U, Th, Sr) incorporated in serpentine phases. The abundance of these elements provides information related to the fluid/rock interactions during serpentinization and the behavior of FME, from their incorporation to their gradual release during subduction. Serpentinites are considered as a reservoir of the FME in subduction zones and their role, notably on arc magma composition, is underestimated presently in the global geochemical cycle.
ISSN: 0024-4937

hal-00903601
https://hal.archives-ouvertes.fr/hal-00903601
DOI : 10.1016/j.lithos.2013.05.019

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The interseismic velocity field provided by geodetic methods is generally interpreted in the framework of a thick elastic lithosphere with a slipping fault at depth. Because lateral variations of lithospheric rheology play a key role in determining the geological strain distribution, I examine the idea that interseismic strain rate variations also occur in response to lateral variations in the elastic thickness of the lithosphere. Using a stress balance principle and some simplifying assumptions, I show using a 1D model that elastic thickness is inversely proportional to strain rate for the simple case of pure strike-slip faulting. Elastic thickness computed on three profiles crossing the San Andreas fault system (SAFS) suggests that the distribution of interseismic strain rate is compatible with a thick elastic lithosphere in the Great Basin-Sierra Nevada province and on the Pacific plate. Conversely, a thin plate with a shallow asthenosphere is needed on the SAFS to explain its high strain rate. A 2.5D Finite Element model of interseismic strain in the Carrizo Plain region in Central California shows how known vertical and horizontal variations of elastic properties refine 1D model predictions. In a case of a multiple fault system, I point out that the interseismic velocity is not causally tied to faults slip rate. Therefore, analysing the velocity field across the SAFS cannot reliably provide faults slip rate distribution as previously claimed. Rather, the apparent correlation between geologic slip rate and interseismic strain may only indicate that the elastic thickness plays a dominant role in controlling fault strength. Finally, I suggest that interseismic geodetic strain could be a new way to infer effective elastic plate thickness on the continents.
ISSN: 0012-821X

hal-00412155
https://hal.archives-ouvertes.fr/hal-00412155
DOI : 10.1016/j.epsl.2008.01.046

Éditeur(s) : HAL CCSD American Chemical Society
Résumé : Experiments were conducted to assess the potential impact of fractured well-cement degradation on leakage rate. Permeability was monitored while CO2-enriched reservoir-equilibrated brine was flowed at constant rate through a single fracture in a class G cement core under conditions mimicking geologic sequestration environments (temperature 60 °C, pressure 10 MPa). The results demonstrate that, at least for the conditions used in the experiment, an initial leakage in a 42 μm aperture fracture (permeability = 1.5 × 10-10 m2) can be self-mitigated due to the decrease of the fracture hydraulic aperture after about 15 h. This decrease results from the development of continuous highly hydrated amorphous Si-rich alteration products at the edge of the fracture and the dense carbonation of the bulk cement that mitigate the penetration of the alteration front.
ISSN: 0013-936X

hal-00950088
https://hal.archives-ouvertes.fr/hal-00950088
DOI : 10.1021/es401317c

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : Geophysical Journal International, v. 173, n. 2, p. 473-482, 2008. http://dx.doi.org/10.1111/j.1365-246X.2008.03718.x
International audience
The western Provence in southern France is an intraplate low deforming region, cut by large sinistral strike-slip faults as the Nîmes Fault. The deformation rate of this fault was estimated at 0.1 mm yr−1 from geological and morphological observations. Nevertheless, some large earthquakes occurred in this area in historical times inducing well-documented partial destructions on the roman monument 'Pont-du-Gard'. In order to investigate if this area is seismically active, we installed a temporary seismological network of 14 stations between the cities of Nîmes and Avignon for a 1-yr period (2002 July–2003 June). We recorded and located a total amount of 80 earthquakes of magnitude Ml smaller than 2.8, and of 153 quarry blasts. The seismic event locations are interpreted in terms of regional tectonics as well as of geometry at depth of the Nîmes Fault and of possible seismic activity of the Roquemaure Fault. At the beginning of 2002 September, a catastrophic storm occurred in the same area with cumulated precipitations at 600 mm in 28 hr, causing casualties and major inundations and damages. We identified a clear and sudden increase of the seismic activity as an immediate consequence of this exceptional meteorological phenomenon. We interpret this rainfall triggering of earthquakes as the response of the crust to an abrupt vertical loading. The geological context of this zone is characterized by the presence of sedimentary basins and of an important karstic network in a calcareous environment allowing the retention of a third of the total rainwater volume during few weeks after the catastrophic storm. Month by month inversion of the seismic wave velocities for only the first 1-km thick layer of the crust allows investigating the influence of the stored water. A clear decrease of both P- and S-velocities, and an increase of the Vp/Vs ratio are evidenced. The variations obtained are at 2, 6 and 4.5 per cent for P-, S-velocities and Vp/Vs ratio, respectively. These variations are discussed in confront of previous studies and can be directly related to the known water volume.
ISSN: 0956-540X

hal-00407884
https://hal.archives-ouvertes.fr/hal-00407884
https://hal.archives-ouvertes.fr/hal-00407884v2/document
https://hal.archives-ouvertes.fr/hal-00407884/file/rigoGJI2008.pdf
DOI : 10.1111/j.1365-246X.2008.03718.x

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : Modern geochronology has moved beyond the acquisition of dates: the goal is to understand the significance of these numbers for the geodynamic evolution of Earth at all scales. The coupling of the laser-ablation microprobe (LAM) to inductively coupled plasma mass spectrometers (ICPMS, multicollector (MC)-ICPMS) has revolutionised geochronology and geochemistry over the last 10 years. These systems enable the rapid and precise in situ analysis of trace-element patterns and isotopic systems, while adding information related to microstructural context and major-element composition. The integration of these multiple sources of data is crucial in constraining the origin of the sample and the processes leading to its formation, so that we can understand the meaning of a date in terms of geological events. LAM-ICPMS measurement of U-Pb ages and trace-element patterns in zircon, coupled with LAM-MC-ICPMS analysis of Hf isotopes in the same grains, gives new insights into the processes of magma genesis. Applied to detrital zircons from modern drainages or sedimentary rocks (the TerraneChron approach), it becomes a powerful tool to investigate problems of crustal evolution on scales ranging from single terranes to continents. The in situ analysis (LAM-MC-ICPMS) of Re-Os systematics in single grains of sulfides in mantle-derived peridotites has demonstrated that most mantle rocks contain several generations of Os-bearing sulfides; whole-rock analyses are mixtures reflecting multiple melting and metasomatic events in the lithospheric mantle. These deep-seated events are commonly mirrored in the crust; Os model-age spectra from xenolith suites show age 'peaks' that correspond to the ages of thermal/tectonic events in the overlying crust, suggesting strong linkages between crust and mantle. Integrated studies of the timing and nature of crustal and mantle events, using these techniques, will be important for understanding the large-scale dynamics of the Earth.
ISSN: 0812-0099

hal-00411328
https://hal.archives-ouvertes.fr/hal-00411328
DOI : 10.1080/08120090802097450

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Large earthquakes nucleate at tectonic plate boundaries, and their occurrence within a plate's interior remains rare and poorly documented, especially offshore. The two large earthquakes that struck the northeastern Indian Ocean on 11 April 2012 are an exception: they are the largest strike-slip events reported in historical times1, 2 and triggered large aftershocks worldwide3. Yet they occurred within an intra-oceanic setting along the fossil fabric of the extinct Wharton basin, rather than on a discrete plate boundary4, 5, 6, 7, 8. Here we show that the 11 April 2012 twin earthquakes are part of a continuing boost of the intraplate deformation between India and Australia that followed the Aceh 2004 and Nias 2005 megathrust earthquakes, subsequent to a stress transfer process recognized at other subduction zones9, 10. Using Coulomb stress change calculations, we show that the coseismic slips of the Aceh and Nias earthquakes can promote oceanic left-lateral strike-slip earthquakes on pre-existing meridian-aligned fault planes. We further show that persistent viscous relaxation in the asthenospheric mantle several years after the Aceh megathrust explains the time lag between the 2004 megathrust and the 2012 intraplate events. On a short timescale, the 2012 events provide new evidence for the interplay between megathrusts at the subduction interface and intraplate deformation offshore. On a longer geological timescale, the Australian plate, driven by slab-pull forces at the Sunda trench, is detaching from the Indian plate, which is subjected to resisting forces at the Himalayan front6, 8, 11.
ISSN: 0028-0836

hal-00767569
https://hal.archives-ouvertes.fr/hal-00767569
DOI : 10.1038/nature11520

Éditeur(s) : HAL CCSD Copernicus Publications
Résumé : International audience
During Ocean Drilling Program Leg 134, a mixed sequence of volcaniclastic and carbonate sediments was cored together with basaltic breccias and a single basalt sill in Hole 833B. In this study, data from Schlumberger's Geochemical Logging Tool, together with physical property logs, characterise part of the section and establish a complete log-derived lithostratigraphy. The major transition between the sedimentary rocks and a basaltic sill at 830 mbsf (metres below sea floor) is clearly seen as well as the distinction between the silicate-rich sediments and the carbonate-rich part of the section. The transition between the volcanic sandstone interbedded with basaltic and sed-lithic breccia of Unit III, and the volcanic sandstone of Unit IV is clearly marked by the physical property logs. The accuracy of the logging data was evaluated and discussed with an improved log versus core correlation. The cluster analysis of the complete data set shows a correlation with the data provided by the mechanical caliper device, which in turn indicates the quality of the borehole.
ISSN: 1816-8957

hal-00642165
http://hal.upmc.fr/hal-00642165
http://hal.upmc.fr/hal-00642165/document
http://hal.upmc.fr/hal-00642165/file/Rabaute_et_al-SciDrilling-1997.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Whole-rock concentrations of Se and Te were determined in 53 peridotite samples collected in orogenic bodies from the Eastern Pyrenees, including the Lherz massif (33 samples), the type-locality of Iherzolite. Orogenic Iherzolites tectonically emplaced into the continental crust escaped devolatilisation that may strongly alter concentrations of those volatile trace elements in basalt-hosted peridotite xenoliths. The Se and Te concentration ranges (<3.5-100.7 ppb; <1-11 ppb) are consistent with the few analyses of mantle samples yet available, yet extending to higher Se concentrations. In-situ analyses performed by LAM-ICPMS on base metal sulfides indicate that the Se budget is controlled by sulfides whereas a large fraction of Te (50 +/- 30%) does not reside in sulfides. The missing fraction is accounted for by fractional crystallization of Pt-Pd tellurides from Cu-Ni sulfide melts. A maximum of one third of the S budget of Eastern Pyrenean peridotites was added by assimilation of crustal sulfides, which crystallized as pyrite. Disregarding those contaminated samples, some features of the Se and Te systematics (e.g. bivariate plots vs. fertility index) cannot be explained by partial melting processes. The best fit for 33 peridotites (mostly from Lherz) yields higher than chondritic S/Se (3.1213 +/- 500; r(2) = 0.96) for near chondritic Se/Te (8.6 +/- 2; r(2) = 0.9). Our study suggest that such superchondritic S/Se ratios are better explained by petrogenetic processes involving refertilization of harzburgitic lithosphere by metal (Cu,Ni)-rich sulfide melts precipitated along with clinopyroxene and Al-spinel from silicate melts en-route to the surface.
ISSN: 0009-2541

hal-00544577
https://hal.archives-ouvertes.fr/hal-00544577
DOI : 10.1016/j.chemgeo.2010.09.007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The lithospheric mantle is intrinsically heterogeneous and anisotropic. These two properties govern the repartition of deformation, controlling intraplate strain localization and development of new plate boundaries. Geophysical and geological observations provide clues on the types, ranges, and characteristic length scales of heterogeneity and anisotropy in the lithospheric mantle. Seismic tomography points to variations in geothermal gradient and hence in rheological behavior at scales of hundreds of km. Seismic anisotropy data substantiate anisotropic physical properties consistent at scales of tens to hundreds of km. Receiver functions imply lateral and vertical heterogeneity at scales < 10 km, which might record gradients in composition or anisotropy. Observations on naturally deformed peridotites establish that compositional heterogeneity and Crystal Preferred Orientations (CPOs) are ubiquitous from the mm to the km scales. These data allow discussing the processes that produce/destroy heterogeneity and anisotropy and constraining the time scales over which they are active. This analysis highlights: (i) the role of deformation and reactive percolation of melts and fluids in producing compositional and structural heterogeneity and the feedbacks between these processes, (ii) the weak mechanical effect of mineralogical variations, and (iii) the low volumes of fine-grained microstructures and difficulty to preserve them. In contrast, olivine CPO and the resulting anisotropy of mechanical and thermal properties are only modified by deformation. Based on this analysis, we propose that strain localization at the plate scale is, at first order, controlled by large-scale variations in thermal structure and in CPO-induced anisotropy. In cold parts of the lithospheric mantle , grain size reduction may contribute to strain localization, but the low volume of fine-grained domains limits this effect.
ISSN: 0040-1951

hal-01277174
https://hal.archives-ouvertes.fr/hal-01277174
DOI : 10.1016/j.tecto.2015.07.026

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Longmen Shan (Sichuan, China) is characterised by an unusual morphology which results from a Triassic prism tectonics and a more recent Neogene thick-skin thrusting. Among its specific features is the high elevation of the internal zones in continuity with the Songpan Garze fold-and-thrust belt (SG), which is associated with an abrupt 20 km Moho offset between the Sichuan Basin and the Tibetan plateau as revealed by the analysis of teleseismic data acquired by a dense seismic network. The jump in crustal thickness is located at the apex of the Wenchuan shear zone (WSZ) and marks the western boundary of the metamorphosed units of SG characterized by temperatures varying from 590 degrees C down to 300 degrees C as commonly observed in mature accretionary wedges. Both the structural style marked by intense shortening in tight kink folds and geophysical data suggest the presence of an horizontal discontinuity at similar to 15 km depth over a thick crust (similar to 63 km).;The Longmen Shan east of the WSZ is characterized by thick-skin detachment which thrusts the internal sedimentary units and the Proterozoic basement over the series of the Sichuan Basin deposited on a thinner crust of similar to 44 km thick. The major front is the Beichuan Fault Zone (BFZ) which brought the internal zones onto Triassic and Jurassic series with lower temperatures (less than 400 degrees C). Locally, temperatures of similar to 425 degrees C are found just below the klippes.;These results are in agreement with an original contact of the SG zone represented by an accretionary wedge of sediments thrusted over the margin of the continental crust of the Yangtze craton in the early stage (Indosinian) of the evolution. The present-day slow E-W component of the convergence, added to the difference in crustal thickness caused the Yangtze crust to indent the Songpan Tibetan crust which was softened by a high thermal regime. As a response the edge of the Tibet crust was inflated to the bottom (up to 70 km), whereas to the top, the crystalline massif were exhumed and pushed the deformation eastward as emerging and blind thrusts. This configuration reflects a moderate shortening of the crust which behaves as a soft thick material abutting the resistant and cold Yangtze crust.
ISSN: 0040-1951

hal-00534849
https://hal.archives-ouvertes.fr/hal-00534849
DOI : 10.1016/j.tecto.2010.03.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present the hierarchical matrix (H-matrix) technique combined with the adaptive cross-approximation (ACA) applied to a three-dimensional (3D) elastostatic problem using the boundary element method (BEM). This is used in structural geology and geomechanics for the evaluation of the deformation and perturbed stress field associated with surfaces of displacement discontinuity. Such optimization significantly reduces (i) the time and memory needed for the resolution of the system of equations, but more importantly (ii) the time needed for the post-processing at observation points where the deformation and the perturbed stress field are evaluated. Specifically, it is shown that the H-matrix structure used with the ACA, clearly captures the kernel smoothness during the post-processing stage according to the field point positions, and optimizes the computation accordingly. Combined with the parallelization on multi-core processors, this technique allows intensive computations to be done on personal desktop and laptop computers. Numerical simulations are presented, showing the advantages of such optimizations compared to the standard method.
ISSN: 0955-7997

hal-00561032
https://hal.archives-ouvertes.fr/hal-00561032
DOI : 10.1016/j.enganabound.2009.10.016