Éditeur(s) : HAL CCSD Lambert Academic Publishing
Résumé : The Himalaya-Tibet system is considered as the classical case of continental collision. Nonetheless, some fundamental questions concerning its structure, as well as physical processes influencing its evolution are still pending. This book presents several advances in the subject matter. Based on new high-resolution geophysical data from the field, combined with robust imaging techniques, the structure of the collision is revealed in detail: the underplating of India beneath half of Tibet, as well as the geometry of the surface along which this happens. Various numerical modelling techniques allow to discuss physical processes at work in the collision zone, such as the rheology of the India plate whose strong mantle supports the Himalayas, or the metamorphic reactions at depth emphasizing the role of water. We recommend this book to Earth Scientists in a broader sense. While specialists in seismology or modelling can thumb technical details, all Readers can get an interdisciplinary overview of mountain building in the Himalayas, with a retrospective outlook on early day explorers and the dawn of some classical geological principles.
https://hal.archives-ouvertes.fr/hal-00854592

ISBN : 978-3838323534
hal-00854592
https://hal.archives-ouvertes.fr/hal-00854592

Éditeur(s) : HAL CCSD
Résumé : International audience
This paper deals with a comparison of different colour space in order to improve high resolution images classification. The background of this study is the measure of the agriculture impact on the environment in islander context. Biodiversity is particularly sensitive and relevant in such areas and the follow-up of the forest front is a way to ensure its preservation. Very high resolution satellite images are used such as QuickBird and IKONOS scenes. In order to segment the images into forest and agriculture areas, we characterize both ground covers with colour and texture features. A classical unsupervised classifier is then used to obtain labelled areas. As features are computed on coloured images, we can wonder if the colour space choice is relevant. This study has been made considering more than fourteen colour spaces (RGB, YUV, Lab, YIQ, YCrCs, XYZ, CMY, LMS, HSL, KLT, IHS, I1I2I3, HSV, HSI, etc.) and shows the visual and quantitative superiority of IHS on all others. For conciseness reasons, results only show RGB, I1I2I3 and IHS colour spaces.
SPIE Remote Sensing Proceedings
Cardiff, United Kingdom

hal-00602277
https://hal.archives-ouvertes.fr/hal-00602277

Éditeur(s) : HAL CCSD
Résumé : International audience
In this paper, we use a multifractal approach based on the computation of two spectrums for image analysis and texture segmentation problems. The two spectrums are the Legendre Spectrum, determined by classical methods, and the Large Deviation Spectrum, determined by kernel density estimation. We propose a way for the fusion of these two spectrums to improve textured image segmentation results. An unsupervised k-means is used as clustering approach for the texture classification. The algorithm is applied on mosaic image built using IKONOS images and various natural textures from the Brodatz album. The segmentation obtained with our approach gives better results than the application of each spectrum separately.
CIARP Proceedings
Cancun, Mexico

hal-00602268
https://hal.archives-ouvertes.fr/hal-00602268

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Both flow field heterogeneity and mass transfer between mobile and immobile domains have been studied separately for explaining observed anomalous transport. Here we investigate non-Fickian transport using high-resolution 3-D X-ray microtomographic images of Berea sandstone containing microporous cement with pore size below the setup resolution. Transport is computed for a set of representative elementary volumes and results from advection and diffusion in the resolved macroporosity (mobile domain) and diffusion in the microporous phase (immobile domain) where the effective diffusion coefficient is calculated from the measured local porosity using a phenomenological model that includes a porosity threshold ( inline image) below which diffusion is null and the exponent n that characterizes tortuosity-porosity power-law relationship. We show that both flow field heterogeneity and microporosity trigger anomalous transport. Breakthrough curve (BTC) tailing is positively correlated to microporosity volume and mobile-immobile interface area. The sensitivity analysis showed that the BTC tailing increases with the value of inline image, due to the increase of the diffusion path tortuosity until the volume of the microporosity becomes negligible. Furthermore, increasing the value of n leads to an increase in the standard deviation of the distribution of effective diffusion coefficients, which in turn results in an increase of the BTC tailing. Finally, we propose a continuous time random walk upscaled model where the transition time is the sum of independently distributed random variables characterized by specific distributions. It allows modeling a 1-D equivalent macroscopic transport honoring both the control of the flow field heterogeneity and the multirate mass transfer between mobile and immobile domains.
ISSN: 0043-1397

hal-01278285
https://hal.archives-ouvertes.fr/hal-01278285
DOI : 10.1002/2015WR017645

Éditeur(s) : HAL CCSD
Résumé : International audience
The Corinth Rift is the most seismically active zone in Europe. Since the year 2000, the Corinth Rift Laboratory (CRL, http://crlab.eu) consisting in a multidisciplinary natural observatory, aims at understanding the mechanics of faulting and earthquake nucleation in the Rift. Recent studies have improved our view about fault geometry and mechanics within CRL but there is still a critical need for a better knowledge of the structure at depth.In this project, we aim to analyze the complete seismological database (13 years of recordings) of CRL by using recently developed methodologies of structural imaging in order to determine, with high resolution, the local 3D structure and the earthquake locations. We perform an iterative joint determination of 3D velocity model and earthquake coordinates. P and S velocity models are estimated through a first arrival traveltime tomography by using the adjoint state method proposed by Taillandier et al. (2009). It consists in the minimization of the cost function between observed and theoretical arrival times,which is achieved by estimating the gradient of the cost function. Earthquake locations are also estimated with a linearized inversion approach by computing the gradient of the misfit function. Iterations are repeated until the cost function no longer decreases. We present preliminary results consisting in: (1) the adjustment of a 1D velocity model that is used as initial model of the 3D tomography and (2) a first attempt of the joint determination of 3D velocity model and earthquake locations.We also perform a preliminary receiver function analysis of teleseismic data recorded by the broadband stations of the CRL network. The multiscale approach (Gesret et. al., 2010) analysis of teleseismic P to S converted waves allows to analyze the signal toward the higher frequencies and thus to characterize the structure at depth with a high resolution. Our multiscale approach should give us reliable depth of interfaces beneath seismometers in the CRL area. In this first attempt, we adjust the 1D velocity model that produces a synthetic RF as similar as possible to the stack of observed RF for a subset of data. The identified interfaces could then be compared with heterogeneities imaged by the tomography.
AGU Fall Meeting
San Fransico, United States

hal-01417184
https://hal-mines-paristech.archives-ouvertes.fr/hal-01417184

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Direct numerical simulations of flow through two millimeter-scale rock samples of limestone and sandstone are performed using three diverse fluid dynamic simulators. The resulting steady-state velocity fields are compared in terms of the associated empirical probability density functions (PDFs) and key statistics of the velocity fields. The pore space geometry of each sample is imaged at 5.06−μm voxel size resolution using X-ray microtomography. The samples offer contrasting characteristics in terms of total connected porosity (about 0.31 for the limestone and 0.07 for the sandstone) and are typical of several applications in hydrogeology and petroleum engineering. The three-dimensional fluid velocity fields within the explicit pore spaces are simulated using ANSYS® FLUENT® ANSYS Inc. (2009), EULAG Prusa et al. (Comput. Fluids 37, 1193–1207 2008), and SSTOKES Sarkar et al. (2002). These computational approaches are highly disperse in terms of algorithmic complexity, differ in terms of their governing equations, the adopted numerical methodologies, the enforcement of internal no-slip boundary conditions at the fluid-solid interface, and the computational mesh structure. As metrics of comparison to probe in a statistical sense the internal similarities/differences across sample populations of velocities obtained through the computational systems, we consider (i) integral quantities, such as the Darcy flux and (ii) main statistical moments of local velocity distributions including local correlations between velocity fields. Comparison of simulation results indicates that mutually consistent estimates of the state of flow are obtained in the analyzed samples of natural pore spaces despite the considerable differences associated with the three computational approaches. We note that in the higher porosity limestone sample, the structures of the velocity fields obtained using ANSYS FLUENT and EULAG are more alike than either compared against the results obtained using SSTOKES. In the low-porosity sample, the structures of the velocity fields obtained by EULAG and SSTOKES are more similar than either is to the fields obtained using ANSYS FLUENT. With respect to macroscopic quantities, ANSYS FLUENT and SSTOKES provide similar results in terms of the average vertical velocity for both of the complex microscale geometries considered, while EULAG tends to render the largest velocity values. The influence of the pore space structure on fluid velocity field characteristics is also discussed.
ISSN: 1420-0597

hal-01174152
https://hal.archives-ouvertes.fr/hal-01174152
DOI : 10.1007/s10596-015-9486-7

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Cnidarian–dinoflagellate photosynthetic symbioses are fundamental to biologically diverse and productive coral reef ecosystems. The hallmark of this symbiotic relationship is the ability of dinoflagellate symbionts to supply their cnidarian host with a wide range of nutrients. Many aspects of this association nevertheless remain poorly characterized, including the exact identity of the transferred metabolic compounds, the mechanisms that control their exchange across the host–symbiont interface, and the precise subcellular fate of the translocated materials in cnidarian tissues. This lack of knowledge is mainly attributed to difficulties in investigating such metabolic interactions both in situ, i.e. on intact symbiotic associations, and at high spatial resolution. To address these issues, we illustrate the application of two in situ and high spatial resolution molecular and ion imaging techniques–matrix-assisted laser desorption ionization mass spectrometry imaging (MALDI-MSI) and the nano-scale secondary-ion mass spectrometry (NanoSIMS) ion microprobe. These imaging techniques provide important new opportunities for the detailed investigation of many aspects of cnidarian–dinoflagellate associations, including the dynamics of cellular interactions.
ISSN: 0944-2006

hal-01546914
http://hal.upmc.fr/hal-01546914
DOI : 10.1016/j.zool.2014.06.006

Éditeur(s) : Ieee-inst Electrical Electronics Engineers Inc
Résumé : We validate Soil Moisture and Ocean Salinity (SMOS) sea surface salinity (SSS) retrieved during August 2010 from the European Space Agency SMOS processing. Biases appear close to land and ice and between ascending and descending orbits; they are linked to image reconstruction issues and instrument calibration and remain under study. We validate the SMOS SSS in conditions where these biases appear to be small. We compare SMOS and ARGO SSS over four regions far from land and ice using only ascending orbits. Four modelings of the impact of the wind on the sea surface emissivity have been tested. Results suggest that the L-band brightness temperature is not linearly related to the wind speed at high winds as expected in the presence of emissive foam, but that the foam effect is less than previously modeled. Given the large noise on individual SMOS measurements, a precision suitable for oceanographic studies can only be achieved after averaging SMOS SSS. Over selected regions and after mean bias removal, the precision on SSS retrieved from ascending orbits and averaged over 100 km $times$ 100 km and 10 days is between 0.3 and 0.5 pss far from land and sea ice borders. These results have been obtained with forward models not fitted to satellite L-band measurements, and image reconstruction and instrument calibration are expected to improve. Hence, we anticipate that deducing, from SMOS measurements, SSS maps at 200 km $times$ 200 km, 10 days resolution with an accuracy of 0.2 pss at a global scale is not out of reach.
Ieee Transactions On Geoscience And Remote Sensing (0196-2892) (Ieee-inst Electrical Electronics Engineers Inc), 2012-05 , Vol. 50 , N. 5 , P. 1662-1675

Droits : 2012 IEEE
http://archimer.ifremer.fr/doc/00074/18557/16108.pdf
DOI:10.1109/TGRS.2012.2184546
http://archimer.ifremer.fr/doc/00074/18557/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Our knowledge and understanding of the 3-D lithospheric structure of the Himalayas and the Tibetan Plateau is still challenging although numerous geophysical studies have been performed in the region. The GOCE satellite mission has the ambitious goal of mapping Earth's gravity field with unprecedented precision (i.e. an accuracy of 1-2 mGal for a spatial resolution of 100 km) to observe the lithosphere and upper-mantle structure. Consequently, it gives new insights in the lithospheric structure beneath the Himalayas and the Tibetan Plateau. Indeed, the GOCE gravity data now allow us to develop a new strategy for joint gravimetry-seismology inversion. Combined with teleseismic data over a large region in a joint inversion scheme, they will lead to lithospheric velocity-density models constrained in two complementary ways. We apply this joint inversion scheme to the Hi-CLIMB (Himalayan-Tibetan Continental Lithosphere during Mountain Building) seismological network which was deployed in South Tibet and the Himalayas for a 3-yr period. The large size of the network, the high quality of the seismological data and the new GOCE gravity data set allow us to image the entire lithosphere of this active area in an innovative way. We image 3-D low velocity and density structures in the middle crust that fit the location of discontinuous low S-velocity zones revealed by receiver functions in previous geophysical studies. In the deeper parts of our velocity model we image a positive anomaly interpreted to be the heterogenous Indian lithosphere vertically descending beneath the centre of the Tibetan Plateau.
ISSN: 0956-540X

hal-00858024
https://hal.archives-ouvertes.fr/hal-00858024
DOI : 10.1093/gji/ggs110

Éditeur(s) : HAL CCSD European Geosciences Union (EGU)
Résumé : International audience
Storms and tsunamis, which may seriously endanger human society, are amongst the most devastating marine catastrophes that can occur in coastal areas. Many such events are known and have been reported for the Mediterranean, a region where high-frequency occurrences of these extreme events coincides with some of the most densely populated coastal areas in the world. In a sediment core from the Mar Menor (SE Spain), we discovered eight coarse-grained layers which document marine incursions during periods of intense storm activity or tsunami events. Based on radiocarbon dating, these extreme events occurred around 5250, 4000, 3600, 3010, 2300, 1350, 650, and 80 years cal BP. No comparable events have been observed during the 20th and 21st centuries. The results indicate little likelihood of a tsunami origin for these coarse-grained layers, although historical tsunami events are recorded in this region. These periods of surge events seem to coincide with the coldest periods in Europe during the late Holocene, suggesting a control by a climatic mechanism for periods of increased storm activity. Spectral analyses performed on the sand percentage revealed four major periodicities of 1228 ± 327, 732 ± 80, 562 ± 58, and 319 ± 16 years. Amongst the well-known proxies that have revealed a millennial-scale climate variability during the Holocene, the ice-rafted debris (IRD) indices in the North Atlantic developed by Bond et al. (1997, 2001) present a cyclicity of 1470 ± 500 years, which matches the 1228 ± 327-year periodicity evidenced in the Mar Menor, considering the respective uncertainties in the periodicities. Thus, an in-phase storm activity in the western Mediterranean is found with the coldest periods in Europe and with the North Atlantic thermohaline circulation. However, further investigations, such as additional coring and high-resolution coastal imagery, are needed to better constrain the main cause of these multiple events.
ISSN: 1814-9324

hal-01357199
https://hal.archives-ouvertes.fr/hal-01357199
https://hal.archives-ouvertes.fr/hal-01357199v2/document
https://hal.archives-ouvertes.fr/hal-01357199/file/cp-12-1389-2016.pdf
DOI : 10.5194/cp-12-1389-2016

Éditeur(s) : HAL CCSD Springer International Publishing AG.
Résumé : International audience
Underwater Seascapes. From geographical to ecological perspectives

hal-01429034
https://hal.archives-ouvertes.fr/hal-01429034
DOI : 10.1007/978-3-319-03440-9_16

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : Results are reported for an acidic water flow-through experiment conducted in a fractured argillaceous limestone sample (73% carbonates). The change in fracture geometry and related parameters is reported for six data sets obtained from synchrotron X-ray microtomography experiments. High-resolution three-dimensional images of the sample allowed quantification of the changes in fracture morphology at a spatial resolution of 6 ;μm. Mineral mass loss and permeability changes in the sample were also determined. Several physico-chemical phenomena were identified during the experiment. Initial smooth fracture surfaces evolved rapidly toward rough surfaces with uneven clay coverage due to the preferential dissolution of carbonate minerals compared to clay minerals whose dissolution rate is about 106 slower. A microporous clay coating progressively developed at the fluid-rock interface during heterogeneous dissolution of the fracture, while the global dissolution rate of the fracture walls exponentially decreased. The increase in surface roughness and the presumed reorganization of clays caused a progressive reduction in permeability. During the last flow-through stage, a large decrease in sample permeability was attributed to the large removal of clay particles; this process was responsible for a dramatic collapse of the fracture walls near the sample inlet and led to the development of preferential flow pathways. The development of the clay coating also acted as a barrier to flow and mass transfer between calcite grains and bulk solution and affected transport processes within the fracture
ISSN: 0043-1397

hal-00405333
https://hal.archives-ouvertes.fr/hal-00405333
DOI : 10.1029/2006WR005379

Éditeur(s) : HAL CCSD
Résumé : International audience
The Heliosat-II method was developed to process Meteosat satellite images in order to assess the solar irradiation at surface. It is modified for its use with GOES satellite images in order to estimate the solar irradiation over French Guiana.Modifications include a change in the calibration formula, in the calculation of the cloud albedo, and in the values of the Linke turbidity factor. These modifications allow the improvement of the performances of the Heliosat-II model in Intertropical zones in French Guiana. The outcomes were compared to coincident measurements of hourly irradiation performed by ground stations.The results show that the use of the maximum apparent albedo as the cloud albedo (ρcmax), along with a fixed value of the Linke turbidity factor produces the best results; the bias was less than 23.61 Wh/m2 (5% of the mean value of the measurements) overall, and the RMSE was less than 109.39 W/m2 (24%) overall when using hourly values. In the case of daily means, the RMSE drops to less than 10.08 W/m2 (10%) overall, whereas the overall bias remains unchanged, as expected. The model performs better in clear skies than in cloudy skies. The results suggest that the Linke turbidity factor used in the Heliosat-II method does not reproduce well the attenuation of the solar radiation in French Guiana. The results were compared to those obtained from Heliosat II method and Meteosat images (HelioClim-3 database) and we found a better accuracy for GOES satellite data, which exhibits smaller viewing angle. The use of the Heliosat II method with GOES images allows assessment of the SSI with a good accuracy and high temporal and spatial resolutions.
Canadian Journal of Remote Sensing

meteo-01304576
https://hal-meteofrance.archives-ouvertes.fr/meteo-01304576
DOI : 10.1080/07038992.2015.1040876

Éditeur(s) : HAL CCSD
Résumé : The heterogeneous nature and sometimes karstified carbonate environments has a direct impact on many environmental issues, such as coastal aquifers affected by saltwater intrusion. At the south of the island of Mallorca (Spain), the Llucmajor carbonate platform offers a privileged site for the study of such intrusions including the experimental site of Campos who meets the intrusion at shallow depth. The characterization of heterogeneous properties passes through a preliminary description of the properties of carbonate reservoirs, including those of the porosity. According to the wide range of sizes of heterogeneities from micrometer to hundreds of meters, the use of multiscale methods is required. This thesis focused on the determination of multiscale porosities from the microporosity to karstic porosity, and of relationships between observation scale changes of these properties. At the micron scale, high-resolution X-ray microtomography allows to extract the microporosity and the microporous network connectivity. At lower resolution (mm), X-ray tomography is also used to study the micro- and macro-porous network at the core scale which is already allocated to number of observations and measurements, including petrophysical. At the borehole scale, the wall images are used to identify the dissolved zones from centimeter macropores to plurimetric karstic cavities. At the larger scale, surface geophysics study the lateral extension of the karsts and heterogeneities. Finally, the porous structure of the studied site is integrated with its wide range of scales into the regional geology of the Llucmajor platform. Thus, the hydrogeophysical observatory set up on the site of Campos to monitor the spreading of salt water in the aquifer is integrated in its geological and petrophysical context, in order to refine the interpretation of its variations of salinity measurements during the time.
La nature hétérogène et parfois karstifiée des milieux carbonatés a un impact direct sur nombre de problématiques environnementales, comme celle des aquifères côtiers affectés par une intrusion d'eau salée. Au sud de l'ile de Majorque (Baléares, Espagne), la plate-forme carbonatée de Llucmajor offre un site privilégié pour l'étude de telles intrusions notamment avec le site expérimental de Campos, qui rencontre l'intrusion à faible profondeur. La caractérisation des propriétés hétérogènes du réservoir passe par une description préalable des propriétés des réservoirs carbonatés et notamment celle de la porosité. Au regard de la large gamme d'échelles d'hétérogénéités allant du micromètre à la centaine de mètre, l'utilisation de méthodes multi-échelles est nécessaire. Ce travail de thèse a porté sur la caractérisation multi-échelle de la porosité, allant de la microporosité à la porosité karstique, et l'établissement de relations entre les changements d'échelles d'observation de ces propriétés. A très petite échelle, la microtomographie haute-résolution à rayons X extrait à l'échelle du micron la microporosité et la connectivité des réseaux microporeux. A plus basse fréquence (celle du mm), la tomographie est également utilisée afin d'étudier le réseau micro- et macroporeux à l'échelle des carottes, à laquelle sont réalisées nombre d'observations et de mesures, notamment pétrophysiques. A l'échelle du puits, les images de paroi permettent d'identifier les zones de dissolution allant des macropores centimétriques aux cavités karstiques plurimétriques. A plus grande échelle, la géophysique de surface permet d'étudier l'extension latérale de ces karsts et hétérogénéités. Enfin, la structure poreuse du site étudié sur cette vaste gamme d'échelles est intégrée à la géologie régionale de la plate-forme de Llucmajor. Ainsi, l'observatoire installé sur le site pour surveiller la propagation de l'eau salée dans l'aquifère a pu être replacé dans son contexte géologique et pétrophysique, afin d'affiner l'interprétation de ses mesures de variations de salinité au cours du temps.
https://tel.archives-ouvertes.fr/tel-00633488

tel-00633488
https://tel.archives-ouvertes.fr/tel-00633488
https://tel.archives-ouvertes.fr/tel-00633488/document
https://tel.archives-ouvertes.fr/tel-00633488/file/TheseHebert.pdf

Éditeur(s) : HAL CCSD Wiley
Résumé :  
A digital land cover map of South America has been produced using remotely sensed satellite data acquired between 1995 and the year 2000. The mapping scale is defined by the 1 km spatial resolution of the map grid-cell. In order to realize the product, different sources of satellite data were used, each source providing either a particular parameter of land cover characteristic required by the legend, or mapping a particular land cover class. The map legend is designed both to fit requirements for regional climate modelling and for studies on land cover change. The legend is also compatible with a wider, global, land cover mapping exercise, which seeks to characterize the world's land surface for the year 2000. As a first step, the humid forest domain has been validated using a sample of high-resolution satellite images. The map demonstrates both the major incursions of agriculture into the remaining forest domains and the extensive areas of agriculture, which now dominate South America's grasslands.
ISSN: 1354-1013

hal-01032088
https://hal.archives-ouvertes.fr/hal-01032088
DOI : 10.1111/j.1529-8817.2003.00774.x

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
A CO2-rich brine core-flood experiment in calcite limestone for conditions representative of underground storage (P = 12 MPa and T = 100°C) was performed in order to explore the dissolution mechanisms arising at moderate CO2 partial pressure (0.3 MPa). An increase of the total porosity (φT) accompanied by a persistent permeability (k) decrease was measured. The mechanisms controlling this atypical anticorrelated k − φT relationship were investigated from the analysis of high-resolution X-ray microtomography images of the sample acquired before and after the experiment. All the evidences converge to the conclusion that the ubiquitous decrease of permeability measured during the 44 h of dissolution is due to the clogging of a fraction of the macroporosity by microporous material triggered by the rearrangement of the detached undissolved particles. This mechanism results in the development of low permeability zones bridging the macroporosity.
ISSN: 0094-8276

hal-00903585
https://hal.archives-ouvertes.fr/hal-00903585
DOI : 10.1002/grl.50595

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Progress in seismic methodology and ambitious large-scale seismic projects are enabling high-resolution imaging of the continental crust. The ability to constrain interpretations of crustal seismic data is based on laboratory measurements on rock samples and calculations of seismic properties. Seismic velocity calculations and their directional dependence are based on the rock microfabric, which consists of mineral aggregate properties including crystallographic preferred orientation (CPO), grain shape and distribution, grain boundary distribution, and misorientation within grains. Single-mineral elastic constants and density are crucial for predicting seismic velocities, preferably at conditions that span the crust. However, high-temperature and high-pressure elastic constant data are not as common as those determined at standard temperature and pressure (STP; atmospheric conditions). Continental crust has a very diverse mineral composition; however, a select number of minerals appear to dominate seismic properties because of their high-volume fraction contribution. Calculations of microfabric-based seismic properties and anisotropy are performed with averaging methods that in their simplest form takes into account the CPO and modal mineral composition, and corresponding single crystal elastic constants. More complex methods can take into account other microstructural characteristics, including the grain shape and distribution of mineral grains and cracks and pores. Dynamic or active wave propagation schemes have recently been developed, which offer a complementary method to existing static averaging methods generally based on the use of the Christoffel equation. A challenge for the geophysics and rock physics communities is the separation of intrinsic factors affecting seismic anisotropy, due to properties of crystals within a rock and apparent sources due to extrinsic factors like cracks, fractures, and alteration. This is of particular importance when trying to deduce crustal composition and the state of deformation from seismic parameters.
ISSN: 8755-1209

Droits : info:eu-repo/semantics/OpenAccess
hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568
https://hal.archives-ouvertes.fr/hal-01685568/document
https://hal.archives-ouvertes.fr/hal-01685568/file/Almqvist_et_al-2017-Reviewssur Geophysics.pdf
DOI : 10.1002/2016RG000552

Résumé : The MEDECO Leg 2 cruise followed the MEDECO Leg 1 cruise that had crossed the Mediterranean Sea from the west to the east to study benthic communities of the Var canyon, deep corals found on the Calabrian Margin and cold seep ecosystems of the Mediterranean Ridge. The main objective of the MEDECO Leg 2 cruise was to study and compare, using a multidisciplinary approach, the structure and dynamics of deep-sea ecosystems at various active cold seep sites from the Nile deep sea fan and the Calabrian Arc, in the Eastern Mediterranean sea. During MEDECO Legs 1 & 2, a multiscale strategy was promoted to integrate (1) a high resolution cartography of geological structures (km2 scale), (2) a detailed mapping, including video imagery, of smaller-scale areas (scale 100 to 300 m2), (3) the physical, chemical and sedimentary characteristics of the habitat (multiscale), (4) the structure and functioning of faunal communities, including microbes, in terms of composition, diversity and biomass (multiscale), (5) small scale studies of interactions between organisms and their environment (scale < m2), (6) detailed ecophysiological studies at the organism scale on invertebrates. The use of the ROV “Victor 6000” and of various equipments for in situ and ex situ observations and measurements has helped reaching our objectives. The MEDECO cruise represented the key-Mediterranean cruise of the HERMES project “Hotspot Ecosystem Research on the Margins of European Seas” (P.I. P. Weaver, NOC-Southampton). The cruise was organized to follow the objectives of the HERMES program to better understand the functioning of deep ecosystems of the continental margins aiming at obtaining: (1) the description and quantification of the natural drivers (geological, hydrological, chemical factors) that control the distribution of ecosystems on margins; (2) the characterization and quantification of biodiversity, from bacteria to megafauna, as well as the knowledge of ecosystem functioning; (3) the study of ecosystems dynamics including the biology/physiology of key-species. Specific objectives. Colonization experiments conducted in the frame of two European programs, Diwoo and Chemeco, have given the opportunity to recover the fauna installed in the devices deployed during the Bionil cruise (2006) and to deploy new ones at the same site located in the pockmark area of the central province of Nile deep sea fan.

Droits : 2008 Insu, Cnrs, Locean
http://archimer.ifremer.fr/doc/00134/24550/22583.pdf
http://archimer.ifremer.fr/doc/00134/24550/

Éditeur(s) : Copernicus Gesellschaft Mbh
Résumé : During the GWADASEIS cruise (Lesser Antilles volcanic arc, February-March 2009) a very high resolution (VHR) seismic-reflection survey was performed in order to constrain Late Quaternary to Present faulting. The profiles we obtained evidence frequent "ponding" of reworked sediments in the deepest areas, similar to the deposition of Mediterranean "homogenites". These bodies are acoustically transparent (few ms t.w.t. thick) and are often deposited on the hanging walls of dominantly normal faults, at the base of scarps. Their thickness appears sufficient to compensate (i.e. bury) co-seismic scarps between successive earthquakes, resulting in a flat and horizontal sea floor through time. In a selected area (offshore Montserrat and Nevis islands), piston coring (4 to 7m long) was dedicated to a sedimentological analysis of the most recent of these particular layers. It corresponds to non-stratified homogenous calcareous silty sand (reworked calcareous plankton and minor volcanoclastics). This layer can be up to 2 m thick, and overlies fine-grained hemipelagites. The upper centimeters of the latter represent the normal RedOx water/sediment interface. Pb-210 and Cs-137 activities lack in the massive sands, while a normal profile of unsupported Pb-210 decrease is observed in the hemipelagite below, together with a Cs-137 peak corresponding to the Atmospheric Nuclear Experiments (1962). The RedOx level was thus capped by a recent instantaneous major sedimentary event considered as post-1970 AD; candidate seismic events to explain this sedimentary deposits are either the 16 March 1985 earthquake or the 8 October 1974 one (M-w = 6.3 and M-w = 7.4, respectively). This leads to consider that the syntectonic sedimentation in this area is not continuous but results from accumulation of thick homogenites deposited after the earthquakes (as observed in the following weeks after Haiti January 2010 event, McHugh et al., 2011). The existence of such deposits suggests that, in the area of study, vertical throw likely results from cumulated effects of separated earthquakes rather than from aseismic creep. Examination of VHR profiles shows that all major co-seismic offsets are recorded in the fault growth sequence and that co-seismic offsets can be precisely estimated. By using a sedimentation rate deduced from Pb-210 decrease curve (0.5 mmyr(-1)) and taking into account minor reworking events detected in cores, we show that the Redonda system may have been responsible for five > M-6 events during the last 34 000 yr. The approach presented in this work differs from fault activity analyses using displaced sets of isochronous surfaces and postulating co-seismic offsets. Combining VHR seismic imagery and coring we can decipher co-seismic vs. slow continuous displacement, and thus actually estimate the amplitude and the time distribution of major co-seismic offsets.
Natural Hazards And Earth System Sciences (1561-8633) (Copernicus Gesellschaft Mbh), 2012 , Vol. 12 , N. 5 , P. 1755-1767

Droits : Author(s) 2012. CC Attribution 3.0 License.
http://archimer.ifremer.fr/doc/00089/20040/21990.pdf
DOI:10.5194/nhess-12-1755-2012
http://archimer.ifremer.fr/doc/00089/20040/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The current interpretation of the Messinian Salinity Crisis (MSC) involves the deposition of peripheral or marginal evaporites in onshore basins as well as the erosion of the margin and the deposition of thick evaporites in deep basins. The so-called intermediate basins are formed in domains between the onland outcrops and the deep basins. The Balearic Promontory is a bathymetric high located between the deep Algerian and Liguro-Provençal basins and the onland Spanish basin. The SIMBAD project aims to investigate the spatial variability of the MSC-related deposits and to assess the extent of post-MSC reactivation over the Balearic Promontory. We present here the first results of the SIMBAD high-resolution seismic survey (January 2013) which imaged for the first time a thin MSC-related unit widely distributed in small sub-basins over the Balearic Promontory.Borehole analyses have shown that this unit could be correlated with primary gypsum formations linked to the peripheral evaporites. Locally, in the Central Depression between Mallorca and Ibiza islands, a thicker MSC unit is observed whose lowermost transparent part could correspond to a salt layer. Geometrical relationships suggest that the MSC in the Central Depression could postdate the primary gypsum. The occurrence of a halite layer in the Central Depression, at depths of 1000 to 1500 m, favours the hypothesis that the evaporites precipitated passively in closed or partially closed perched sub-basins, possibly as a result of evaporative drawdown at different depths and possibly diachronously, at least with respect to the deep-basin evaporites.
ISSN: 0264-8172

hal-01364255
https://hal.archives-ouvertes.fr/hal-01364255
DOI : 10.1016/j.marpetgeo.2014.09.008