Éditeur(s) : HAL CCSD
Résumé : This work focus on the characterization of the source and dynamic of compactional fluids during sedimentary burial, through two complementary examples of late orogenic oil‐field half‐grabens: The exhumed Lodève Permian Basin and a deep buried Jurassic basin in the North Viking Graben (North Sea).Constituting the main part of the thesis, a multi‐disciplinary approach was conducted in the Lodève Basin where Ba‐F‐Cu‐Pb polymetallic mineralized systems are trapped into synrift faults and paleokarsts in the carbonate basement at the hinge point of the rollover. The source, timing and P/T conditions of fluid migration were deduced from the analysis of the microfabric, the fluid inclusions microthermometry, and the isotopic (Sr, S, O, H) and Rare Earth Element (REE) signature. Results are then crossed with a structural and thermal modeling that consolidates the sequence and dynamics of fluid during burial.A similar approach was conducted in the North Viking Graben where fluid markers are restricted to 3D seismic and well core data. Comparable Ba‐Pb‐Zn veins are reported in basin margin, plugging one of the most important siliciclastic hydrocarbon reservoir in the substratum. This analysis provides additional constraints on basinal fluid behavior and allows us to propose a global dynamic model for various compositions of fluids and reservoirs.We conclude to a polyphase fluid sequence history including:(a) In the carbonate basement of the Lodève Basin, karstic paleocanyon incisions and associated cavities coupled to synrift fault, act as major drain for fluids. These structures are early affected by hypogen‐sulfuric karstification in response to the interaction between bacterial oxidation of sulfides entrapped within Lower Permian blackshales and the basement oxidizing aquifer.(b) Disequilibrium compaction initiates overpressure‐driven basinal fluid migration towards basin margins, characterized by temperatures around 150‐180°C and salinities between 9 et 18wt%eq.NaCl. Isotopic (Sr, S, O) and REE analyses reveal that Ba‐M+‐rich mineralizing fluids derived mainly from buried blackshales diagenesis. External fluids coming from the lower crust are also identified that play a key role in fluorite precipitation by the leaching of late hercynian granites (mean temperature of 250°C and salinity > 20wt%eq.NaCl).(c) During the synrift period, fluid overpressure is responsible for the periodic reactivation of fault plane according to seismic‐valve process, bedded‐control shearing and hydraulic brecciation at the basement‐seal interface. These mechanisms induce cyclic polymetallic mineralization by the mixing between in‐situ formation water and deep ascending basinal fluids.(d) Thermogenic fluids expulsion starts with last basinal fluids during late burial stage. Hydrocarbons thus migrate along the same regional pathways up to the rollover crest, where they are partly rerouted by the previous mineralized baffle.(e) In the Lodève basin, post‐rift exhumation of the margins led to the remobilization of synrift deposits by subaerial biochemical processes at the sulfate‐methane transition. The latter results from the interaction between the still active hydrocarbon dysmigration with a playa lake sulfate‐rich aquifer. Secondary low‐temperature barite fronts precipitate then within basement meteoric karsts.In addition to the « source to sink » model of basinal fluids, this work provides new insights on the early plugging of hydrocarbon reservoirs and for the metallogenesis of Mississippi Valley‐Type deposits.
Ce travail porte sur la caractérisation de la source et de la dynamique des fluides de bassin au cours de leur chargement à travers deux exemples complémentaires de demi‐grabens tardi‐orogéniques pétroliers : Le Bassin Permien de Lodève, aujourd’hui à l’affleurement et un bassin jurassique enfouis dans le North Viking Graben (Mer du Nord).Le coeur de la thèse concerne le Bassin de Lodève où, à partir d’une approche pluridisciplinaire intégrée, nous avons caractérisé l’architecture des minéralisations (Ba, F, Cu, Pb) piégées dans un réseau paléokarstique alimenté par les failles syn‐rift, dans le substratum carbonaté à l’apex du roll‐over. La source, le calendrier et les conditions de migration des fluides ont été approchés à partir de l’analyse de la micro‐fabrique, la microthermométrie sur inclusions fluides, les analyses isotopiques (Sr, S, O, H) et de Terres Rares. Les résultats analytiques ont été enfin croisés avec un modèle thermique et structural du bassin qui conforte la séquence et la dynamique du système fluide en cours d’enfouissement.Une démarche similaire, mais plus limitée, a été conduite dans le bassin du North Viking Graben où l’accès aux marqueurs fluides est restreint aux données de sismique 3D et de carottes. Comme à Lodève, les minéralisations Ba‐Pb‐Zn colmatent un réservoir dans le substratum à l’apex du roll‐over. Elles se présentent sous forme de ciments dans des grès ou des fractures. Cette analyse apporte des contraintes complémentaires et permet de proposer un modèle dynamique général avec des variantes en fonction de la nature des fluides et des réservoirs.On retiendra donc la séquence fluide suivante :(a) Dans le cas du bassin de Lodève sur substratum carbonaté, les chemins préférentiels de drainage se développent dans des paléocanyons N‐S couplés à un réseau de fractures et d’endokarsts météoriques. Ces derniers sont élargis en début de rifting par la dissolution hypogène sulfurique produite par l’oxydation bactérienne des sulfates et des pyrites des blackshales, au contact de l’aquifère oxydant du Cambrien.(b) Le déséquilibre de compaction initie la migration des fluides interstitiels en surpression vers les marges avec des températures autour de 150‐180°C et des salinités entre 9 et 18wt%eq.NaCl. Les analyses isotopiques (Sr, S, O) révèlent que la majorité des fluides provient de l’altération diagénétique des blackshales riches en métaux. Des interactions sont également mises en évidence avec des fluides profonds (entre 240°C et 260°C ; salinités > à 20wt%eq.NaCl), qui lessivent les granites tardi‐hercyniens.(c) Pendant le syn‐rift, les conditions de surpression de fluide permettent la réactivation cyclique des failles, les décollements stratigraphiques et la formation de brèches hydrauliques, favorisant la mise en connexion avec les réservoirs superficiels à l’apex du rollover. Le modèle de Sibson ajusté aux fluides de bassins est alors le moteur de la migration verticale.(d) Les fluides thermogéniques commencent à être expulsés avec les derniers fluides de compaction au cours d’un stade plus évolué de l’enfouissement en empruntant les mêmes chemins jusqu’à l’apex du roll over. Ils sont alors partiellement freinés et déviés par les colmatages minéralisés antérieurs.(e) A Lodève, la continentalisation des minéralisations antérieures au cours de l’exhumation post‐rift conduit à leur remaniement partiel au niveau de la transition sulfate‐méthane induite par l’interaction entre une playa évaporitique et la dysmigration des hydrocarbures. Des barytines secondaires de basse température, déprimées en Sr sont alors précipitées de manière synsédimentaire dans des karsts météoriques du socle.Outre l’illustration d’un modèle complet (source to sink) de dynamique des fluides dans un bassin, ce travail apporte de nouvelles contraintes dans l’approche du colmatage des réservoirs à hydrocarbures sur les têtes de blocs basculés et sur la genèse des gîtes miniers de type Mississippi Valley‐Type.
https://hal.archives-ouvertes.fr/tel-01457583

tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583/document
https://hal.archives-ouvertes.fr/tel-01457583/file/th%C3%A8seLaurent2015V2.pdf

Éditeur(s) : Elsevier Science Bv
Résumé : The modern Rhone delta in the Gulf of Lions (NW Mediterranean) is a typical wave-dominated delta that developed after the stabilization of relative sea level following the last deglacial sea-level rise. Similar to most other deltas worldwide, it displays several stacked parasequences and lobes that reflect the complex interaction between accommodation, sediment supply and autogenic processes on the architecture of a wave-dominated delta. The interpretation of a large set of newly acquired very high-resolution seismic and sedimentological data, well constrained by 14C dates, provides a refined three-dimensional image of the detailed architecture (seismic bounding surfaces, sedimentary facies) of the Rhone subaqueous delta, and allows us to propose a scenario for delta evolution during the last deglaciation and Holocene. The subaqueous delta consists of “parasequence-like” depositional wedges, a few meters to 20–30 m in thickness. These wedges first back-stepped inland toward the NW in response to combined global sea-level rise and overall westward oceanic circulation, at a time when sediment supply could not keep pace with rapid absolute (eustatic) sea-level rise. At the the Younger Dryas-Preboreal transition, more rapid sea-level rise led to the formation of a major flooding surface (equivalent to a wave ravinement surface). After stabilization of global sea level in the mid-Holocene, accommodation became the leading factor controlling delta architecture. An eastward shift of depocenters occurred, probably favoured by higher subsidence rate within the thick Messinian Rhone valley fill. The transition between transgressive (backstepping geometry) and regressive (prograding geometry) (para)sequences resulted in creation of a Maximum Flooding Surface (MFS) that differs from a “classical” MFS described in the literature. It consists of a coarse-grained interval incorporating reworked shoreface material within a silty clay matrix. This distinct lithofacies results from condensation/erosion, which appears as an important process even within supply-dominated deltaic systems, due to avulsion of distributaries. The age of the MFS varies along-strike between ca. 7.8-5.6 kyr cal. BP in relation to the position of depocenters and climatically-controlled sediment supply. The last rapid climate change of the Holocene, the Little Ice Age (1250–1850 AD), had a distinct stratigraphic influence on the architecture and lithofacies of the Rhone subaqueous delta through the progradation of two deltaic lobes. In response to changes in sediment supply linked to rapid climate changes (and to anthropic factors), the Rhone delta evolved from wave-dominated to fluvial dominated, and then wave dominated again.
Sedimentary Geology (0037-0738) (Elsevier Science Bv), 2014-05 , Vol. 305 , P. 35-53

Droits : 2014 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00179/29017/27445.pdf
DOI:10.1016/j.sedgeo.2014.02.004
http://archimer.ifremer.fr/doc/00179/29017/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
New outcrops in the Sinis peninsula (Sardinia, Italy) allow a detailed description of the Messinian erosion surface. The correlation between outcrops, industrial seismic data and data collected offshore Oristano from a recent cruise permits reconstruction of the geometry of this surface from presently emerged interfluves to the deep canyons offshore, with: - onshore: an eroded karstic plateau presently cropping out over a 20 km × 5 km area. Well-preserved karst structures occur locally and can form several metres high reliefs. The southernmost edge of the plateau is limited by a cliff. The karstic plateau and the cliff are sealed by transgressive deposits of Pliocene age; - offshore, an interfluve zone with a mostly flat and low-angle dipping plateau, westward dissected by paleovalleys which were identified down to a depth of 2000 m. In the Oristano Gulf, Messinian paleovalleys were also identified. The Capo San Marco paleocliff was probably located on the edge of a canyon. Onshore, only one major erosion surface was identified, located at the top the Messinian sequence. Offshore, this surface extends down to the abyssal plain. The surface was emplaced above deposits related to the Terminal Carbonate Complex. This indicates that the marginal evaporites are older than the major drawdown of the Mediterranean sea-level. The major drawdown is related to the deposition of the deep evaporites.
ISSN: 0037-0738

hal-00407864
https://hal.archives-ouvertes.fr/hal-00407864
DOI : 10.1016/j.sedgeo.2008.06.005

Éditeur(s) : HAL CCSD
Résumé : Point processes are often used as spatial or spatio-temporal distribution models of occurrences. In this PhD dissertation, we focus first on Cox processes driven by a hidden process associated with a Dirichlet process. This model corresponds to hidden occurrences influencing the stochastic intensity of observed occurrences. We generalize the notion of "Shot noise Cox process" introduced by M{o}ller and develop its bayesian analysis by a Gibbs sampler combined with a Metropolis-Hastings algorithm. We show that our MCMC method is a reversible jump one. The model takes into account a random number of hidden contributions producing effects on the observed point process intensity. Therefore the parameter space has a variable dimension. We focus the statistical inference on the estimation of the hidden contribution expected value, the hidden contribution expected number, the spatial influence and correlation parameters. The contribution equality test and contribution independence test are proposed. Applications in epidemiology and ecology are shown from extit{Rubus fruticosa} data, extit{Ibicella lutea} data and death number data in counties of Georgia, USA. Two situations are considered with respect to available data~: firstly, the spatial positions of occurrences are observed between several pairs of consecutive dates; secondly, counts are carried out over a fixed time interval in several spatial sampling units. Secondly, we focus on point processes with memory introduced by Kagan, Ogata and Vere-Jones, pioneers in statistical seismology. In fact, spatio-temporal point processes play an important role in the studies of earthquake catalogs since they consist of seismic events with their dates and spatial locations. We studied an ETAS (Epidemic Type Aftershock Sequence) model with time independent background intensity and several triggering functions taking into account previous events. We illustrate our approach with a seismicity study of the Lesser Antilles arc. A comparaison study of Gamma, Weibull, Log-Normal and modified Omori law triggering function models is also carried out. We show that the modified Omori law does not fit the Lesser Antilles seismic data and the best adjusted triggering function is the Weibull model. Consequently, the waiting time between aftershocks is weaker in the Lesser Antilles zone compared to the one in regions with seismicity described by the modified Omori law. In other words, aftershock aggregativity is higher in the Lesser Antilles region. The stochastic background intensity following a Dirichlet process centered on a spatial log-normal process is discussed.
Les processus ponctuels sont souvent utilisés comme modèles de répartitions spatiales ou spatio-temporelles d'occurrences. Dans cette thèse, nous nous intéressons tout d'abord à des processus de Cox dirigés par un processus caché associé à un processus de Dirichlet. Ce modèle correspond à des occurrences cachées influençant l'intensité stochastique des occurrences observées. Nous généralisons la notion de " Shot noise Cox process " introduite par Moller et développons le traitement bayésien par un échantillonneur de Gibbs combiné à un algorithme de Metropolis-Hastings. Nous montrons que cette méthode MCMC est à sauts réversibles. Le modèle prend en compte, en effet, un nombre aléatoire de contributions cachées influençant l'intensité du processus ponctuel observé donc a un espace paramétrique de dimension variable. Nous focalisons l'inférence statistique sur l'estimation de la valeur espérée de chaque contribution cachée, le nombre espéré de contributions cachées, le degré d'influence spatiale de ces contributions et leur degré de corrélation. Le test d'égalité des contributions et celui de leur indépendance sont ainsi développés. L'utilité en épidémiologie et en écologie est alors démontrée à partir de données de Rubus fruticosa, Ibicella lutea et de mortalité dans les cantons de Georgia, USA. En termes de données observées, deux situations sont considérées: premièrement, les positions spatiales des occurrences sont observées entre plusieurs paires de dates consécutives; deuxièmement, des comptages sont effectués, au cours d'une période fixée, dans des unités d'échantillonnage spatiales. D'autre part, nous nous intéressons aux processus ponctuels à mémoire introduits par Kagan, Ogata et Vere-Jones, précurseurs de la statistique sismologique. En effet, les processus ponctuels spatio-temporels ont une place importante dans l'étude des catalogues sismiques puisque ces derniers sont généralement constitués d'événements sismiques datés et géo-référencés. Nous avons étudié un modèle ETAS (Epidemic Type Aftershock Sequence) avec une intensité d'arrière-plan indépendante du temps et plusieurs fonctions déclenchantes permettant d'intégrer les événements antérieurs récents. Cette approche est utilisée pour étudier la sismicité de l'arc des Petites Antilles. Une étude comparative des modèles Gamma, Weibull, Log-Normal et loi d'Omori modifiée pour les fonctions déclenchantes est menée. Nous montrons que la loi d'Omori modifiée ne s'ajuste pas aux données sismiques des Petites Antilles et la fonction déclenchante la plus adaptée est le modèle de Weibull. Cela implique que le temps d'attente entre répliques dans la zone des Petites Antilles est plus faible que celui des régions à sismicité décrite par la loi d'Omori modifiée. Autrement dit, l'agrégation des répliques après un événement majeur est plus prononcée dans la zone des Petites Antilles. La possibilité d'inclure une intensité d'arrière-plan suivant un processus de Dirichlet centré sur un processus spatial log-gaussien est discutée.
https://tel.archives-ouvertes.fr/tel-00841146

Droits : info:eu-repo/semantics/OpenAccess
NNT : 2012AGUY0555
tel-00841146
https://tel.archives-ouvertes.fr/tel-00841146
https://tel.archives-ouvertes.fr/tel-00841146/document
https://tel.archives-ouvertes.fr/tel-00841146/file/these_VALMY.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : The dense hydrous magnesium silicate called the D phase is the most likely candidate to recycle hydrogen into the lower mantle in subduction zones. As seismology represents the preferred method to detect this mineral in subduction zones, the single crystal elastic tensor has been calculated using first principle methods. A triple cell (View the MathML source) was used to account for an ordered ideal composition of the D phase to lower mantle pressures. The elastic tensor of the mineral at ambient conditions is predicted to be C11 = 387.7, C33 = 287.7, C44 = 100.4, C12 = 108.0, C13 = 51.1, C14 = − 14.6 in GPa with bulk modulus at zero pressure Ko = 163 GPa and a statistical error of about 4.0 GPa for all constants. The pressure derivatives of the elastic constants have been determined to pressure of 80 GPa. Our tensor correctly predicts the published experimental measurements of linear compressibility along the a- and c-axes, the logarithmic pressure derivative of the c/a axial ratio and bulk modulus at zero pressure. It contradicts the experimentally measured elastic tensor reported by (Liu, L.-G., Okamoto, K., Yang, Y.-J., Chen, C.-C., Lin, C.-C., 2004. Elasticity of single-crystal phase D (a dense hydrous magnesium silicate) by Brillouin spectroscopy. Solid State Commun. 132, 517–520), which fails to reproduce the experimental compressibility data. Using the elastic constants and density predicted to 85 GPa, the seismic anisotropy of P- and S-waves has been calculated as a function of pressure. The single crystal has high P-wave velocities and shear wave splitting in the basal plane below 20 GPa. At high pressures, the maximum P-wave velocities have threefold symmetry normal to a-axes in the basal plane, whereas the maximum shear wave splitting is parallel to a-axes with twofold symmetry. The D phase has high Vp and Vs anisotropy at ambient pressure, 17.6% for Vp and 19.9% for Vs. The Vp anisotropy decreases with increasing pressure to about 30 GPa, while it remains constant at 8% from 30 to 85 GPa. The Vs anisotropy decreases to 17% at 20 GPa and then increases to 22% at 85 GPa. The isotropic velocity ratios of S to P (Rs/p), bulk sound to S (Rphi/s) and density to S (Rρ/s) are calculated as a function of pressure. The Rs/p shows very little variation with pressure with low value of 0.6, whereas both Rphi/s and Rρ/s increase with pressure to peak values of 2.8 and 2.0 respectively at about 60 GPa. The presence of the D phase in subducted horizontal ‘stagnant' plates in the circum Pacific could contribute to a number of seismic observations, such as the observed velocity heterogeneity at depths between 500 and 1000 km and the fast S-waves travelling horizontally with horizontal polarization in this depth range. Further the lower density of the D phase compared with anhydrous minerals could influence buoyancy of the hydrated ‘stagnant' slabs. The transformation of the D phase to perovskite plus ferripericlase during thermal annealing may be responsible for horizontal slab seismogenesis.
ISSN: 0012-821X

hal-00406379
https://hal.archives-ouvertes.fr/hal-00406379
DOI : 10.1016/j.epsl.2007.04.053

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Subduction of a narrow slab of oceanic lithosphere beneath a tightly curved orogenic arc requires the presence of at least one lithospheric scale tear fault. While the Calabrian subduction beneath southern Italy is considered to be the type example of this geodynamic setting, the geometry, kinematics and surface expression of the associated lateral, slab tear fault offshore eastern Sicily remain controversial. Results from a new marine geophysical survey conducted in the Ionian Sea, using high-resolution bathymetry and seismic profiling reveal active faulting at the seafloor within a 140 km long, two-branched fault system near Alfeo Seamount. The previously unidentified 60 km long NW trending North Alfeo Fault system shows primarily strike-slip kinematics as indicated by the morphology and steep-dipping transpressional and transtensional faults. Available earthquake focal mechanisms indicate dextral strike-slip motion along this fault segment. The 80 km long SSE trending South Alfeo fault system is expressed by one or two steeply dipping normal faults, bounding the western side of a 500+ m thick, 5 km wide, elongate, syntectonic Plio-Quaternary sedimentary basin. Both branches of the fault system are mechanically capable of generating magnitude 6–7 earthquakes like those that struck eastern Sicily in 1169, 1542, and 1693.
ISSN: 0278-7407

insu-01256887
https://hal-insu.archives-ouvertes.fr/insu-01256887
https://hal-insu.archives-ouvertes.fr/insu-01256887/document
https://hal-insu.archives-ouvertes.fr/insu-01256887/file/GutscherEtal_2015_Tectonics.pdf
DOI : 10.1002/2015TC003898

Éditeur(s) : Elsevier Science Bv
Résumé : In the South Gabon Basin, deep multi-channel seismic reflection and gravity modeling analysis have shed light on key features of the structure of the margin. The thinned continental crust beneath the Gabon Margin appears to be composed of two distinct layers, separated by a clear, strong and more or less continuous reflector running in the 7–10 s TWT window. The lower crust is characterized by a higher density, intermediate between the lower values of the upper crust and the denser values of the mantle. The lower crust is irregularly shaped and presents lateral thickness variations along the direction of thinning and along the coast. In the offshore thinned continental domain, the lower and upper crust form a 20–25 km thick body. Crustal thicknesses point to a relatively sharp and narrow transition, along a few tens of kilometers, between the unthinned and the thinned continental crust. The high density layer identified offshore Gabon presents similar characteristics in density, geometry and spatial distribution, as the underplated magmatic bodies observed along volcanic margins, e.g. along the South Atlantic Namibia Margin or the North Atlantic Vøring Margin. Although this lower crustal body could possibly represent ultra mafic serpentinized rocks or high grade metamorphic crustal rocks, we suggest that it could be composed of mafic rocks. Magmas resulting from partial melting during rifting may underplate the crust and/or be intruded in the lower crust through a system of dykes and sills. In this view, the present-day crustal thicknesses along rifted margins, characterized by magmatic underplating and/or intrusion, are not representative of the thinning that the crust experienced during rifting. Results of this study point to relatively shallow sedimentary basins along the South Gabon Margin. The deepest offshore depocenters located under the westernmost side of the continental platform appear to be associated with the deepest syn-rift basins These basins seem to extend along 20 to 40 km in the ~ NE–SW direction with a present-day average thickness of 7.3 km. Offshore Gabon, whereas the crustal thinning appears significant, the syn-rift deposit are not thick. We suggest that the area was anomalously uplifted during the rifting phase, due to an elevated thermal lithospheric gradient. The conclusions derived from our seismic and gravity analysis are consistent with the implications such a thermal anomaly would have on the tectonic evolution of a rifted margin with 1) an underplated high density lower crustal layer, 2) shallow depth syn-rift basins associated with a relatively thin crust and subsequently 3) elevated recorded subsidence rates in the initial post-rift stages. Research Highlights ► The Gabon Margin appears characterized by an underplated high density lower crustal layer. ► Shallow depth syn-rift basins are associated with a relatively thin crust. ► Seismic and gravity analysis points to an anomalous uplift of the Gabon Margin during the rifting phase. ► Crustal structure, syn-rift infill and post-rift subsidence are consistent an uplift of the Gabon Margin during the rifting phase. ► The uplift of the Gabon Margin is possibly due to an elevated thermal lithospheric gradient.
Tectonophysics (0040-1951) (Elsevier Science Bv), 2011-06 , Vol. 506 , N. 1-4 , P. 31-45

Droits : 2011 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00039/15020/12347.pdf
DOI:10.1016/j.tecto.2011.04.009
http://archimer.ifremer.fr/doc/00039/15020/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We report on microstructural data obtained by optical microscopy and transmission electron microscopy concerning the crystallographic relationships of serpentine minerals with their host olivine in two contrasting situations. In the first case, mesh-textured lizardite (liz) is developed in a standard 60% serpentinized oceanic harzburgite from the Oman ophiolite where olivine converts to columnar lizardite. The joined columns are perpendicular to the basal plane (001)(liz), corresponding to the pseudofibres observed optically. The plane (001)(liz) is locally parallel to the narrow boundary ol-liz; thus column orientations register the interface of serpentinization. The ol-liz relationships are not strictly topotactic, but reflect preferred cracking orientations in olivine, parallel to (010)(ol). In the second case, antigorite (atg) develops in a rare sample of antigorite schist in a kimberlite from Moses Rock (Colorado Plateau), representative of a suprasubduction-zone mantle wedge. High-resolution transmission electron microscopy (HRTEM) images along [010](atg) show domains of very regular modulation with a 43 center dot 5 A wavelength (m = 17, where m is the number of silicate tetrahedra along the wave), with few defects, indicative of HP-HT antigorite, and also heavily kinked regions as fingerprints of strong tectonic shear. TEM imaging and electron diffraction patterns reveal two topotactic relationships between antigorite and olivine: [100](atg)//[010](ol) and < 100 >(atg)//< 100 >(ol); the planes in contact are (001)(atg)//(100)(ol) and (001)(atg)//(010)(ol), respectively. The [010](atg)//[001](ol) and antigorite lamellae are parallel to the forsterite b-axis. In both cases, the topography of olivine-serpentine interfaces is controlled by open fluid pathways along microcracks oriented according to the anisotropy of the olivine aggregate. In the cases studied, the serpentine aggregate exhibits a preferred orientation inherited from that of the peridotite. These results have some relevance to the seismic anisotropy of serpentinized mantle. Anisotropy of propagation of seismic waves as a result of the olivine fabric is maintained and reinforced with the development of lizardite. Conversely, the development of antigorite produces a trench-parallel fast S-wave polarization and an anisotropy that is lowered at low degrees of serpentinization and then increased with increasing serpentinization.
ISSN: 0022-3530

hal-00456061
https://hal.archives-ouvertes.fr/hal-00456061
DOI : 10.1093/petrology/egp049

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The seismic behavior of the Himalayan arc between central Nepal and Arunachal Pradesh remains poorly understood due to the lack of observations concerning the timing and size of past major and great earthquakes in Bhutan. We present here the first paleoseismic study along the Himalayan topographic front conducted at two sites in southern central Bhutan. Paleoseismological excavations and related OxCal modeling reveal that Bhutan experienced at least two great earthquakes in the last millennium: one between the seventeenth and eighteenth century and one during medieval times, producing a total cumulative vertical offset greater than 10 m. Along with previous studies that reported similar medieval events in Central Nepal, Sikkim, and Assam, our investigations support the occurrence of either (i) a series of great earthquakes between A.D. 1025 and A.D. 1520 or (ii) a single giant earthquake between A.D. 1090 and A.D. 1145. In the latter case, the surface rupture may have reached a total length of ~800 km and could be associated with an earthquake of magnitude Mw = 8.7–9.1.
ISSN: 0148-0227

hal-01622276
https://hal.archives-ouvertes.fr/hal-01622276
DOI : 10.1002/2015JB012733

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Parentis and Arzacq-Mauleon basins located in front of the V-shaped oceanic propagator in the Bay of Biscay present evidence for extreme crustal thinning. In this paper we investigate the 3D structure of these rift basins, based on field observations and the interpretation of seismic data. We compare these results with those obtained from two different and independent inversion methods: first a 3D gravity inversion and second the standard Euler deconvolution.;For the Mauleon Basin our results show that the positive gravimetric anomaly identified above its southern margin is the consequence of two shallower high density bodies that are separated by the Pamplona fault and a deeper high density body. The high density bodies can be explained by the presence of mid-crustal and mantle rocks that were exhumed or uplifted at shallower depth during Early Cretaceous rifting before they were reworked and integrated to the Pyrenean chain during compression phase. Also, during this reactivation phase, some slices of the exhumed mid-crustal and mantle rocks were sheared off and were integrated in the present-day thrust belt in the Mauleon basin. For the Parentis Basin we can demonstrate, based on seismic data and gravimetric inversion methods, a decrease in extension from west to east, which is compatible with the V-shape geometry of the overall basin. Along strike, a change in the fault geometry from downward concave top-basement detachment faults to upward concave high-angle faults can be observed eastwards, i.e. towards the termination of the basin. A key structure, controlling the evolution of the Parentis Basin, is the east-west trending Ibis fault. We interpret this fault to have initially formed as a strike slip fault before it was reactivated during later crustal thinning. At present, it forms the limit between an upper plate sag basin to the north and a lower plate sag basin, floored at least locally by a top-basement detachment faults to the south. The strong asymmetry of the basin is supported by the shape of the basin and the results of standard Euler deconvolution.
ISSN: 0040-1951

hal-00523444
https://hal.archives-ouvertes.fr/hal-00523444
DOI : 10.1016/j.tecto.2010.04.023

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Reef positions record the interaction between eustasy and tectonics, and have been used worldwide to characterize vertical deformations of upper-plates at different time-scales and constrain the seismic behavior of megathrusts. Along the Lesser Antilles volcanic arc, high-resolution marine geophysical data were collected on the 2–20 km wide eastern Martinique reef platform to reconstruct its stratigraphic and morphologic history, and understand the influence of local normal faulting, volcanism and plate-scale subduction processes on Holocene and Late Pleistocene reef development. The subsiding Martinique platform's stratigraphy is composed of multiple superimposed sea-level highstand deposits separated by subaerial exposure surfaces of sea-level low stands. The carbonate platform consists of two laterally-extensive carbonate units (unit U2 overlying unit U3) that extend to the platform edge to a depth of − 95 m MSL (mean sea level), and form two morphologic terraces, M2 and M3 respectively. The landward portion of unit U2 is partially overlain between 0 and − 60 m MSL by the living reef tract U1. The current reef is composed of a landward fringing reef, a lagoon and a seaward barrier reef, the latter forming a double-bank barrier around the Caravelle Peninsula. In near-shore multi-channel seismic profiles, a distinct reflector at ~− 35 m MSL, probably a subaerial exposure surface E1, separates the reef sequence formed during the last transgression from a Pleistocene fossil reef tract forming unit U2. Offshore of Mount Pelée volcano (Late Pleistocene), the Holocene reef did not develop above unit U2, whose upper surface is incised by channels and apparent sinkholes. During the Holocene transgression, the possibility of excessive turbidity due to volcanic activity may have inhibited reef development in this area. The un-dated unit U2 probably developed 120–130 ka ago during the last interglacial (MIS 5.5) + 6 m MSL highstand as thick, extensive reefs deposited all along the Lesser Antilles arc. Due to subsidence, MIS 5.5 reefs are not represented by onshore facies, except along the southern Sainte Anne Peninsula where normal faulting and uplift balances island-scale subsidence. Based on unit U2's present elevation and assuming an MIS 5.5 age and + 6 m MSL sea level, Martinique has subsided at maximum 0.3 m/ky, likely due to subduction processes that question the coupling state of the megathrust.
ISSN: 0025-3227

hal-01307036
https://hal.archives-ouvertes.fr/hal-01307036
DOI : 10.1016/j.margeo.2015.08.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Properly assessing the extent and magnitude of fault ruptures associated with large earthquakes is critical for understanding fault behavior and associated hazard. Submarine faults can trigger tsunamis, whose characteristics are defined by the geometry of seafloor displacement, studied primarily through indirect observations (e.g., seismic event parameters, seismic profiles, shipboard bathymetry, coring) rather than direct ones. Using deep-sea vehicles, we identify for the first time a marker of coseismic slip on a submarine fault plane along the Roseau Fault (Lesser Antilles), and measure its vertical displacement of ∼0.9 m in situ. We also map recent fissuring and faulting of sediments on the hangingwall, along ∼3 km of rupture in close proximity to the fault's base, and document the reactivation of erosion and sedimentation within and downslope of the scarp. These deformation structures were caused by the 2004 M w 6.3 Les Saintes earthquake, which triggered a subsequent tsunami. Their characterization informs estimates of earthquake recurrence on this fault and provides new constraints on the geometry of fault rupture, which is both shorter and displays locally larger coseismic displacements than available model predictions that lack field constraints. This methodology of detailed field observations coupled with near-bottom geophysical surveying can be readily applied to numerous submarine fault systems, and should prove useful in evaluating seismic and tsunamigenic hazard in all geodynamic contexts.
ISSN: 0012-821X

insu-01557932
https://hal-insu.archives-ouvertes.fr/insu-01557932
https://hal-insu.archives-ouvertes.fr/insu-01557932/document
https://hal-insu.archives-ouvertes.fr/insu-01557932/file/EPSL-2006-escartin.pdf
DOI : 10.1016/j.epsl.2016.06.024

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The three-dimensional S-wave velocity structure beneath the South Pacific Superswell is obtained from joint broadband seismic experiments on the ocean floor and islands. We collected only approximately 800 relative times of long-period teleseismic SH-waves by using a waveform cross-correlation from 76 events occurring from January 2003 to May 2005. We conducted relative time tomography to obtain a 3D structure to depths of 1600 km. In the resultant image, we find a characteristic distribution of low- velocity regions. The most prominent features are a large doughnut-shaped low-velocity region at 800 km depth, and an elongated large low-velocity region beneath the Society to Pitcairn hotspots at 1200 km depth. Our model suggests that a large low shear velocity province rooted in the D00 extends upwards and culminates near the top of the lower mantle beneath the central part of the South Pacific Superswell although its perfect continuity is not still confirmed.
ISSN: 0094-8276

hal-01389114
http://hal.univ-reunion.fr/hal-01389114
http://hal.univ-reunion.fr/hal-01389114/document
http://hal.univ-reunion.fr/hal-01389114/file/Tanaka_PLUME_lower_mantle_GRL2009.pdf
DOI : 10.1029/2009GL037568

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The northern Canadian Cordillera (NCC) is an active orogenic belt in northwestern Canada characterized by deformed autochtonous and allochtonous structures that were emplaced in successive episodes of convergence since the Late Cretaceous. Seismicity and crustal deformation are concentrated along corridors located far (>200 to ~800 km) from the convergent plate margin. Proposed geodynamic models require information on crust and mantle structure and strain history, which are poorly constrained. We calculate receiver functions using 66 broadband seismic stations within and around the NCC and process them to estimate Moho depth and P-to-S velocity ratio (Vp/Vs) of the Cordilleran crust. We also perform a harmonic decomposition to determine the anisotropy of the subsurface layers. From these results, we construct simple seismic velocity models at selected stations and simulate receiver function data to constrain crust and uppermost mantle structure and anisotropy. Our results indicate a relatively flat and sharp Moho at 32 ± 2 km depth and crustal Vp/Vs of 1.75 ± 0.05. Seismic anisotropy is pervasive in the upper crust and within a thin (~10–15 km thick) sub-Moho layer. The modeled plunging slow axis of hexagonal symmetry of the upper crustal anisotropic layer may reflect the presence of fractures or mica-rich mylonites. The subhorizontal fast axis of hexagonal anisotropy within the sub-Moho layer is generally consistent with the SE-NW orientation of large-scale tectonic structures. These results allow us to revise the geodynamic models proposed to explain active deformation within the NCC.
ISSN: 2169-9313

Droits : info:eu-repo/semantics/OpenAccess
hal-01685550
https://hal.archives-ouvertes.fr/hal-01685550
https://hal.archives-ouvertes.fr/hal-01685550/document
https://hal.archives-ouvertes.fr/hal-01685550/file/Tarayoun_et_al-2017-Journalsur Geophysical_Research__Solid_Earth.pdf
DOI : 10.1002/2017JB014284

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The association of experimental data showing that the plastic deformation of olivine, the main constituent of the upper mantle, is highly anisotropic and the ubiquitous seismic anisotropy in the upper mantle, which indicates that olivine crystals show coherent orientations over scales of tens to hundreds of kilometers, implies that the long-term deformation in the upper mantle is anisotropic. We propose a multiscale approach, based on a combination of finite element and homogenization techniques, to model the deformation of a lithospheric plate while fully considering the mechanical anisotropy stemming from a strain-induced orientation of olivine crystals in the mantle. This multiscale model explicitly takes into account the evolution of crystal preferred orientations (CPO) of olivine and of the mechanical anisotropy during the deformation. We performed a series of numerical experiments simulating the uniaxial extension of a homogeneous (100% olivine) but anisotropic plate to test the role of the olivine CPO on the plate mechanical behavior and the link between CPO and mechanical anisotropy evolution. Even for this simple solicitation, different orientations and intensity of the initial olivine CPO result in variable plate strengths and deformation regimes. A plate with an initial CPO where the olivine [100] and [010] axes are concentrated at 45 degrees to the extension direction has high resolved shear stresses on the easy (010)[100] and (001)[100] slip systems of olivine. This results in low strength and in deformation by transtension. Plates with an initial CPO where the maximum of [100] axes is parallel or normal to the extension direction show a high initial strength. Isotropic plates have an intermediate behavior. The progressive rotation of olivine [100] axes toward the imposed stretching direction results in hardening in all models, except in those characterized by an initial concentration of olivine [100] axes normal to the imposed extension, in which softening is followed by hardening.
ISSN: 1525-2027

hal-00420063
https://hal.archives-ouvertes.fr/hal-00420063
DOI : 10.1029/2009GC002423

Éditeur(s) : HAL CCSD Elsevier
Résumé : In this study, I examine the strain modes of the forearc, arc and back-arc domains in arc-continent collisional settings leading to arc material subduction, delamination and/or accretion. The study focusses on two well-documented colliding island arcs: the Izu–Bonin–Mariana (IBM) arc in Japan and the Luzon arc in Taiwan, both carried by the Philippine Sea plate. Firstly, there is a body of evidence that both the IBM and the Luzon arcs were built on the same Late Jurassic to Early Cretaceous “proto-Philippine Sea Plate” crust. Their internal structure is thus more heterogeneous than expected from Paleogene or Neogene supposedly “intra-oceanic” island arcs. Secondly, those arc systems and proximal “back-arcs” have similar seismic characteristics attesting either for the presence of a middle crust with continental velocities and/or serpentinized uppermost mantle that facilitate crustal shortening/slivering and subsequent decoupling from the rest of the subducting plate. It is shown that the proximal back-arc domain (called “rear-arc” in case of paleoarc activity), overlying the mantle wedge and the subducting slab, may lose its strength if slab-derived hydration occur. Decoupling then occurs below the Moho. Arc delamination likely occurs in mid-crustal levels because middle-crust, heated by nearby magmatism, becomes weak. Accretion of arc material onto the upper plate depends on the characteristics of the arc itself and the geodynamic configuration. Most of the accreted material is probably underplated rather than frontally accreted.
ISSN: 0743-9547

hal-01243080
https://hal.archives-ouvertes.fr/hal-01243080
DOI : 10.1016/j.jseaes.2013.07.043

Éditeur(s) : Neidine Editeurs
Résumé : The object of this article is to offer a synthesis of the knowledge clarifying the originality and the diversity of the submarine geological formations of the New Caledonian EEZ. A reminder is given onto the geologic history of the region, based upon the dislocation of the Gondwana Continent, the opening of the Tasman Sea, the presence of submarine volcanism, the setting up of heavy peridotitic rocks, the building up of the Fairway and Lord Howe Ridges and of sedimentary basins, the formation of volcanic domes and sea-mounts or guyots, the subduction along the Vanuatu Trench, the uplift of the Loyalty Islands, the development of carbonated ptatforms around the islands etc.... Of this complex history ensues an exceptional submarine geo-diversity. After this presentation the article clarifies the methods and the tools used in marine geosciences to map, explore, observe, analyze, sample, that they are embarked or are autonomous, teleoperated or inhabited systems. A chapter describes the programs which were set up since about forty years and the results obtained as well as the scientific teams concerned with. In conclusion, based on the unpublished character of this geo-diversity, the article introduces the second text to come in a next issue of theTai Kona magazine, text which will focus on the scientific, economic (mineral resources), environmental (deep biodiversity) and risks (seismicity) challenges that are worn by one of the most original submarine geologic context in the world.
L’objet de cet article est de proposer une synthèse des connaissances explicitant l’originalité et la diversité des formations géologiques sous-marines de la ZEE calédonienne. Un rappel est donné sur l’histoire géologique de la région basée sur la dislocation du continent Gondwana, l’ouverture de la Mer de Tasman, la présence de volcanisme sous-marin, la mise en place des péridotites, la formation des rides de Fairway et Lord Howe et de bassins sédimentaires, la formation de dômes et monts sous-marins ou guyots, la subduction le long de la fosse de Vanuatu, la surrection des Loyautés, la mise en place de plateformes carbonatées etc... De cette histoire complexe découle une géo-diversité sous-marine exceptionnelle. Après cette présentation l’article explicite les méthodes et les outils utilisés en géosciences marines pour cartographier, explorer, observer, analyser, prélever, qu’ils soient embarqués ou soient des systèmes autonomes, télé-opérés ou habités. Un chapitre décrit les programmes qui ont été mis en place depuis une quarantaine d’années et les résultats obtenus ainsi que les équipes scientifiques en place. En conclusion sur le constat du caractère inédit de cette géo-diversité, l’article introduit un deuxième texte à venir dans un prochain numéro de Tai Kona, texte qui se focalisera sur les enjeux scientifiques, économiques (ressources minérales), environnementaux (biodiversité profonde) et de risques (sismicité) portés par un contexte géologique sous-marin des plus originaux.
Tai Kona (2269-7535) (Neidine Editeurs), 2014 , N. 8 , P. 48-57

Droits : 2014 Tai Kona
http://archimer.ifremer.fr/doc/00194/30574/29098.pdf
http://archimer.ifremer.fr/doc/00194/30574/

Éditeur(s) : HAL CCSD Elsevier
Résumé : The seismic characteristics of focused fluid-related features such as pockmarks and carbonate build-ups on the Nigerian continental slope have been investigated using complementary seismic data sets (reprocessed 3D exploration data and 2D Very High Resolution hull-mounted and near-bottom seismic data) coupled with the results of previous studies (sedimentological, geotechnical and geochemical analyses).The results show different types of fluid-related features within the hemipelagic phase of long duration (∼1 Myr) Turbidite/Hemipelagic cycles. They are the product of the disturbance of the hosting sediments following two main distinct processes: (1) no or low sediment deposition caused by fluid escape associated with seafloor settlement (benthic fauna, carbonate precipitation, gas hydrate formation) and (2) post-depositional erosion, caused either by fluid release (dewatering from underlying features such as channels and upward migration from a deep source) or by collapse (destabilisation of gas hydrates). The temporal evolution reveals a decrease in fluid flow during the hemipelagic deposition as witnessed by the decrease in methanogenic activity and by gas hydrate destabilisation. The spatial distribution of fluid-related features seems to be controlled by the type of fault (small fault or structural lineament).
ISSN: 0264-8172

hal-01685513
https://hal.archives-ouvertes.fr/hal-01685513
DOI : 10.1016/j.marpetgeo.2017.10.004

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We performed forward modelling of seismic anisotropy beneath a migrating strike-slip plate boundary to: (1) test if such a geodynamic context might explain teleseismic shear wave splitting data in the vicinity of the central part of the San Andreas Fault and (2) constrain the power of such data to unravel vertical and lateral variations in deformation patterns in the upper mantle. The modelling involves five steps: (1) thermomechanical modelling, using a finite-element code, of the deformation field, (2) viscoplastic self-consistent modelling of the resulting olivine and pyroxene crystal preferred orientations, (3) calculation of the elasticity tensors for different domains of the finite elements (FEs) model, (4) forward modelling of seismic wave propagation through the model using ray theory, finite-frequency theory and a full-wave approach and (5) performing splitting measurements on the synthetic seismograms. SKS splitting data in central California are best fitted by a model with a hotter geotherm within 60 km of the plate boundary accounting for the opening of an asthenospheric window due to the northward migration of the Mendocino Triple Junction. The westward motion of the plate boundary cannot however explain the rotation of fast polarization directions east of the San Andreas Fault in central California. Comparison between modelled and measured individual shear wave splitting also implies that the homogeneity of the two-layer models accounting for the observations in the vicinity of the San Andreas Fault indicates a sharp transition between lithospheric and asthenospheric deformations beneath this plate boundary. The ability of different synthetic approaches to localize horizontally and vertically the plate boundary-related deformation differs significantly. Splitting in ray theory synthetics closely follow variations in olivine crystallographic preferred orientations in the model. In contrast, splitting analysis on full-wave synthetics, which should be more representative of actual long-period SKS waves, results in smooth apparent lateral variations of anisotropy; the exact location and width of the plate boundary may only be retrieved by comparing fast-polarization profiles obtained using a multichannel analysis on waves with different periods.
ISSN: 0956-540X

hal-01236150
http://hal.univ-reunion.fr/hal-01236150
http://hal.univ-reunion.fr/hal-01236150/document
http://hal.univ-reunion.fr/hal-01236150/file/Bonnin_San_Andreas_modelling_GJI2012.pdf
DOI : 10.1111/j.1365-246X.2012.05650.x

Éditeur(s) : HAL CCSD
Résumé : À la découverte de la structure lithosphérique et de l'aléa sismique régional dans le pays du bonheur, situé au cœur de l'Himalaya. Compte rendu d'un projet franco-suisse en cours.
Geosciences Actuel

hal-00854422
https://hal.archives-ouvertes.fr/hal-00854422