Éditeur(s) : HAL CCSD
Résumé : The evolution of mountain belt piedmont is controlled by interactions between tectonics, erosion and sedimentation. To study coupling between these processes, we analyze morphometric data collected in the eastern Tian Shan piedmont (NW China) and develop a new analogue modelling technique. The modeling approach uses an experimental set-up and analog material specifically designed to study simultaneously tectonic structures (faults, folds), detailed morphology (drainage basins, channels, alluvial fans, etc.) and stratified sedimentation. Measurement techniques based on laser interferometry and image correlation are also developed to quantify the topographic and kinematic evolution of models.
Our experiments allow a new approach for the study of piedmont morphotectonic evolution. Our results indicate that tectonics mainly controls this evolution. The propagation of deformation and the formation of relief both significantly influence the development of drainage networks, the evolution of drainage basins and the formation of morphotectonic markers. Particularly, a study of alluvial fans and watershed metrics suggests that there is a dynamical equilibrium between uplift, erosion and morphology. In addition, our results show that terrace nucleation is controlled by thrust activity and hydrography adjustments. Folding of terraces responds to a homothetic deformation pattern.
This new methodology brings promising perspectives in the fields of geomorphology, seismotectonics and sedimentology.
L'évolution d'un piémont de chaîne de montagnes est contrôlée par les interactions entre la tectonique, l'érosion et la sédimentation. Pour étudier ces processus, nous avons analysé des données morphométriques issues des piémonts orientaux du Tian Shan (NW Chine) et développé un nouveau type de modélisation analogique. Cette approche utilise un dispositif et un matériau expérimental spécialement conçus pour modéliser simultanément des structures tectoniques (failles, plis), une morphologie détaillée (bassins versants, rivières, cônes alluviaux, etc.) et une sédimentation stratifiée. Des techniques de mesure optique ont été également mises en oeuvre afin de quantifier l'évolution topographique et cinématique des modèles.
Les expériences réalisées offrent une opportunité inédite d'étudier l'évolution morphotectonique d'un piémont. Nos résultats montrent que la tectonique exerce un contrôle de premier ordre sur cette évolution. La propagation de la déformation et la formation des reliefs influencent en effet significativement le développement du réseau de drainage, l'évolution des bassins versants et la formation des marqueurs morphotectoniques. En particulier, l'analyse de la morphométrie des cônes alluviaux et de leurs bassins versants suggère qu'un équilibre dynamique s'installe entre la surrection, l'érosion et la morphologie. Nos résultats montrent également que l'apparition des terrasses est guidée par l'activité des chevauchements et les adaptations de l'hydrographie. Leur modèle de plissement répond à une déformation homothétique.
Cette nouvelle approche ouvre des perspectives d'étude prometteuses en géomorphologie, sismotectonique et stratigraphie.
https://tel.archives-ouvertes.fr/tel-00339145

tel-00339145
https://tel.archives-ouvertes.fr/tel-00339145
https://tel.archives-ouvertes.fr/tel-00339145v2/document
https://tel.archives-ouvertes.fr/tel-00339145/file/These_Graveleau08.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Longmen Shan (Sichuan, China) is characterised by an unusual morphology which results from a Triassic prism tectonics and a more recent Neogene thick-skin thrusting. Among its specific features is the high elevation of the internal zones in continuity with the Songpan Garze fold-and-thrust belt (SG), which is associated with an abrupt 20 km Moho offset between the Sichuan Basin and the Tibetan plateau as revealed by the analysis of teleseismic data acquired by a dense seismic network. The jump in crustal thickness is located at the apex of the Wenchuan shear zone (WSZ) and marks the western boundary of the metamorphosed units of SG characterized by temperatures varying from 590 degrees C down to 300 degrees C as commonly observed in mature accretionary wedges. Both the structural style marked by intense shortening in tight kink folds and geophysical data suggest the presence of an horizontal discontinuity at similar to 15 km depth over a thick crust (similar to 63 km).;The Longmen Shan east of the WSZ is characterized by thick-skin detachment which thrusts the internal sedimentary units and the Proterozoic basement over the series of the Sichuan Basin deposited on a thinner crust of similar to 44 km thick. The major front is the Beichuan Fault Zone (BFZ) which brought the internal zones onto Triassic and Jurassic series with lower temperatures (less than 400 degrees C). Locally, temperatures of similar to 425 degrees C are found just below the klippes.;These results are in agreement with an original contact of the SG zone represented by an accretionary wedge of sediments thrusted over the margin of the continental crust of the Yangtze craton in the early stage (Indosinian) of the evolution. The present-day slow E-W component of the convergence, added to the difference in crustal thickness caused the Yangtze crust to indent the Songpan Tibetan crust which was softened by a high thermal regime. As a response the edge of the Tibet crust was inflated to the bottom (up to 70 km), whereas to the top, the crystalline massif were exhumed and pushed the deformation eastward as emerging and blind thrusts. This configuration reflects a moderate shortening of the crust which behaves as a soft thick material abutting the resistant and cold Yangtze crust.
ISSN: 0040-1951

hal-00534849
https://hal.archives-ouvertes.fr/hal-00534849
DOI : 10.1016/j.tecto.2010.03.018

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The outstanding exposure of deformation bands in a multilayer sequence of the Orange quarry, Provence, France, motivates a study investigating the development and controls of deformation band geometries by field mapping combined with finite element modeling. Field mapping yields new insights into angular relations between, and evolution of, the deformation bands as well as provides input parameters for the setup and boundary conditions of the numerical simulations using ADELI 2D. In particular, reverse-sense deformation bands are found to have developed within three of the four exposed layers of the multilayer stack with similar orientations to bedding, indicating layer-parallel contraction. Numerical simulations, carried out as a parametric study to investigate the influence on deformation band development and geometry, successfully reproduce the sequential development of deformation bands in the three layers as seen in the field as well as recreate the observed angular geometries of similar to 39 degrees to the maximum compression. This angular relationship is put into context with observations from other field studies and theoretical values to explore controls of deformation band orientations. Furthermore, band localization is impeded in the model by increased layer cohesive strength, demonstrating the importance of host-rock property variations on where localization of bands within the multilayer sequence. Results from both field investigation and numerical simulations are consistent with regional tectonics, where the strata underwent gentle folding due to thrust faulting at depth, and bring further insight into the development and geometry of deformation bands in both extensional and contractional tectonic regimes.
ISSN: 0148-0227

hal-00639452
https://hal.archives-ouvertes.fr/hal-00639452
DOI : 10.1029/2011JB008365

Éditeur(s) : HAL CCSD
Résumé : International audience
The Corinth Rift is the most seismically active zone in Europe. The area is characterized by very localized NSextension at a rate of1.5cm/year, the occurrence of frequent and intensive microseismic crises and occasionalmoderate to large earthquakes like in 1995 (Mw=6.1).Since the year 2000, the Corinth Rift Laboratory (CRL, http://crlab.eu) consisting in a multidisciplinary naturalobservatory, aims at understanding the mechanics of faulting and earthquake nucleation in the Rift. Recent studieshave improved our view about fault geometry and mechanics within CRL, but there is still a critical need for a betterknowledge of the structure at depth both for the accuracy of earthquake locations and for mechanical interpretationof the seismicity.In this project, we aim to analyze the complete seismological database (13 years of recordings) of CRL by usingrecently developed methodologies of structural imaging, in order to determine at the same time and with highresolution, the local 3D structure and the earthquake locations.We perform an iterative joint determination of 3D velocity model and earthquake coordinates. In a first step, Pand S velocity models are determined using first arrival time tomography method proposed by Taillandier et al.(2009). It consists in the minimization of the cost function between observed and theoretical arrival times which isachieved by the steepest descent method (e.g. Tarantola 1987). This latter requires computing the gradient of thecost function by using the adjoint state method (Chavent 1974). In a second step, earthquakes are located in thenew velocity model with a non-linear inversion method based on a Bayesian formulation (Gesret et al. 2015). Step1 and 2 are repeated until the cost function no longer decreases.We present preliminary results consisting in: (1) the adjustement of a 1D velocity model that is used as initialmodel of the 3D tomography and (2) a first attempt of the joint determination of 3D velocity model and earthquakelocation.In addition to the tomographic imaging, we perform a preliminary receiver function analysis of teleseismic datarecorded by the broadband stations of the CRL network. The RF analysis should provide the interface depthsbeneath seismometers and increase the imaging resolution of the upper crustal structures provided by the 3Dtomography. In this first attempt, we adjust the 1D velocity model that produces a synthetic RF as similar aspossible to the observed RF for a subset of data. We compare the identified interfaces with structures imaged bythe tomography.
EGU general assembly 2016
Vienne, Austria

hal-01306224
https://hal-mines-paristech.archives-ouvertes.fr/hal-01306224

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy P - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
While the kinematics of Anatolia plate and the North Anatolian Fault System (NAFS) has been studied extensively, the slip rate and locking depth along the NAFS are usually assumed constant in the analyses due to the lack of sufficient data. This is also partly due to the reasonably good fit of Euler small circle and partly due to the lack of spatial resolution of observations to determine slip rates independently from locking depths. On the other hand, recent geodetic studies show a contrast for locking depth between Marmara and other parts of the NAFS, implying a non-uniform locking depth across the NAFS. In this study, we analyse new GPS data and homogenously combine available data sets covering the eastern part of the NAFS to form the most complete data set. In particular, we incorporate the first results of Turkish Real-Time Kinematic GPS Network (CORS-TR) into our data set. A detailed analysis of three profiles within the NAFS reveals an increase of locking depth in the middle profile to 19.1 ± 3.4 km from 11.9 ± 3.5 km in the easternmost profile while the slip rate is nearly constant (20–22 mm yr−1), which implies a variation of strain rate of ∼100 nanostrain yr−1. Assuming a constant locking depth throughout whole NAFS gives an average locking depth of 14.3 ± 1.7 km. Our best estimates of slip rates in block modelling which takes the variation of locking depths into account are in the range between 22.5 and 22.8 mm yr−1 over eastern part of the NAFS.
ISSN: 0956-540X

hal-01218392
https://hal.archives-ouvertes.fr/hal-01218392
DOI : 10.1093/gji/ggv274

Éditeur(s) : [S.l.] : Murray
Siècle(s) traité(s) : 15
Droits : Domaine public
Provenance : Université des Antilles. Service commun de la documentation
Permalien : http://www.manioc.org/patrimon/HASH2cabbb39c250663de04713
HASH2cabbb39c250663de04713

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We developed a new granular material (MatIV) to study experimentally landscape evolution in active mountain belt piedmonts. Its composition and related physical properties have been determined using empirical criteria derived from the scaling of deformation, erosion-transport and sedimentation natural processes. MatIV is a water-saturated composite material made up with 4 granular components (silica powder, glass microbeads, plastic powder and graphite) whose physical, mechanical and erosion-related properties were measured with different laboratory tests. Mechanical measurements were made on a modified Hubbert-type direct shear apparatus. Erosion-related properties were determined using an experimental set-up that allows quantifying the erosion/sedimentation budget from tilted relaxation topographies. For MatIV, we also investigated the evolution of mean erosion rates and stream power erosion law exponents in 1D as a function of slope.;Our results indicate that MatIV satisfies most of the defined criteria. It deforms brittlely according to the linear Mohr-Coulomb failure criterion and localizes deformation along discrete faults. Its erosion pattern is characterized by realistic hillslope and channelized processes (slope diffusion, mass wasting, channel incision). During transport, eroded particles are sorted depending on their density and shape, which results in stratified alluvial deposits displaying lateral fades variations. To evaluate the degree of similitude between model and nature, we used a new experimental device that combines accretionary wedge deformation mechanisms and surface runoff erosion processes. Results indicate that MatIV succeeded in producing detailed morphological and sedi-mentological features (drainage basin, channel network, terrace, syntectonic alluvial fan). Geometric, kinematic and dynamic similarity criteria have been investigated to compare precisely model to nature. Although scaling is incomplete, it yields particularly informative orders of magnitude. With all these characteristics, MatIV appears as a very promising material to investigate experimentally a wide range of scientific questions dealing with relief dynamics and interactions between tectonics, erosion and sedimentation processes.
ISSN: 0040-1951

hal-00669904
https://hal.archives-ouvertes.fr/hal-00669904
DOI : 10.1016/j.tecto.2011.09.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We report preliminary results of a seismological experiment, SEISMOTANZ'07, which consisted in the deployment of a local network (35 stations) in the East African Rift System (EARS), North Tanzania, during 6 months in 2007. We compare two earthquake sequences (Gelai and Manyara) occurring respectively in the southern end of the Kenya rift and in the North Tanzanian Divergence (NTD). Only distant of 150 km, their triggering mechanisms are different. None of the sequences depicts typical swarm or mainshock-aftershock patterns. They highlight the change in the magmatic/tectonic nature of the rift where the eastern branch of the EARS enters the Tanzanian craton. The similar shape and long-axis of the elongate sequences emphasize the preferred locus of active strain release along NE-SW discontinuities which probably root at depth into steep Proterozoic shear zones. At Gelai, the deformation is dominated by aseismic process involving slow slip on normal fault and dyke intrusion within the upper crust Calais_et_al_2008. The spatial and temporal earthquake distribution indicates a possible correlation between the Gelai crisis and the eruption of the nearby Oldoinyo Lengai volcano. At Manyara, the sequence is more uncommon, revealing a long-lasting seismic activity deepely rooted (20-35 km depth) possibly related to stress loading transmitted laterally. The yield stress envelope modelled from the depth frequency distribution of earthquakes in the NTD is consistent with the presence of a mafic lower crust and further supports the strength increase of the rifted crust from south Kenya to the NTD.
ISSN: 0899-5362

hal-00420599
https://hal.archives-ouvertes.fr/hal-00420599
DOI : 10.1016/j.jafrearsci.2009.09.005

Éditeur(s) : HAL CCSD American Association for the Advancement of Science
Résumé : International audience
Large earthquakes produce crustal deformation that can be quantified by geodetic measurements, allowing for the determination of the slip distribution on the fault. We used data from Global Positioning System (GPS) networks in Central Chile to infer the static deformation and the kinematics of the 2010 moment magnitude (M-w) 8.8 Maule megathrust earthquake. From elastic modeling, we found a total rupture length of similar to 500 kilometers where slip (up to 15 meters) concentrated on two main asperities situated on both sides of the epicenter. We found that rupture reached shallow depths, probably extending up to the trench. Resolvable afterslip occurred in regions of low coseismic slip. The low-frequency hypocenter is relocated 40 kilometers southwest of initial estimates. Rupture propagated bilaterally at about 3.1 kilometers per second, with possible but not fully resolved velocity variations.
ISSN: 0036-8075

hal-00783213
https://hal.archives-ouvertes.fr/hal-00783213
DOI : 10.1126/science.1204132

Éditeur(s) : New York : C. T. Dillingham Boston : Lee and Shepard
Description : Immersion in the history, culture and way of life of the Caribs of the amazing Lesser Antilles.
Siècle(s) traité(s) : 19
Droits : Domaine public
Provenance : Ville de Pointe-à-Pitre. Réseau des bibliothèques
Permalien : http://www.manioc.org/patrimon/PAP11013
PAP11013

Date de création : 1870-01-01

Éditeur(s) : London : Bell & Daldy
Siècle(s) traité(s) : 19
Droits : Domaine public
Provenance : Collectivité territoriale de Guyane. Bibliothèque Alexandre-Franconie
Permalien : http://www.manioc.org/patrimon/FRA11002
FRA11002