Éditeur(s) : HAL CCSD
Résumé :  
Wood samples were taken from the upper and lower sides of 21 naturally tilted trees from 18 families of angiosperms in the tropical rain forest in French Guyana. The measurement of growth stresses ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile stressed wood on the upper side, called tension wood, and lower tensile stressed wood on the lower side, called opposite wood. Eight species had tension wood fibres with a distinct gelatinous layer (G-layer). The distribution of gelatinous fibres varied from species to species. One of the species, Casearia javitensis (Flacourtiaceae), showed a peculiar multilayered secondary wall in its reaction wood. Comparison between the stress level and the occurrence of G-layer indicates that the G-layer is not a key factor in the production of high tensile stressed wood.
IAWA Journal

hal-01032051
https://hal.archives-ouvertes.fr/hal-01032051

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Apatite fission track analysis (AFTA) data are used to bring new light on the long-term and recent history of the Baikal rift region (Siberia). We describe the evolution of the topography along a NW-SE profile from the Siberian platform to the Barguzin range across the Baikal-southern Patom range and the northern termination of Lake Baikal. Our results show that the Baikal-Patom range started to form in the Early Carboniferous and was reactivated in Middle Jurassic-Lower Cretaceous times during the orogenic collapse of the Mongol-Okhotsk belt. Samples located in the Siberian platform recorded a continuous sedimentation up to the early Carboniferous but remain unaffected by later tectonic episodes. The Barguzin basin probably started to form as early as Late Cretaceous, suggesting a continuum of deformation between the postorogenic collapse and the opening of the Baikal Rift System (BRS). The initial driving mechanism for the opening of the BRS is thus independent from the India-Asia collision. AFTA show a late Miocene-early Pliocene increase in tectonic extension in the BRS that confirms previous thoughts and might reflect the first significant effect of the stress field generated by the India-Asia collision.
ISSN: 0278-7407

hal-00420895
https://hal.archives-ouvertes.fr/hal-00420895
DOI : 10.1029/2008TC002404

Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : International audience
The seaward extension of onshore formations and structures were previously almost unknown in Provence. The interpretation of 2D high-resolution marine seismic profiles together with the integration of sea-bottom rock samples provides new insights into the stratigraphic, structural and paleogeographic framework of pre-Messinian Salinity Crisis (MSC) deposits of the Provence continental shelf. Seven post-Jurassic seismic units have been identified on seismic profiles, mapped throughout the offshore Provence area and correlated with the onshore series. The studied marine surface and sub-surface database provided new insights into the mid and late Cretaceous paleogeography and structural framework as well as into the syn-and post-rift deformation in Provence. Thick (up to 2000 m) Aptian-Albian series whose deposition is controlled by E-W-trending faults are evidenced offshore. The occurrence and location of the Upper Cretaceous South-Provence basin is confirmed by the thick (up to 1500 m) basinal series downlaping the Aptian-Albian unit. This basin was fed in terrigenous sediments by a southern massif (" Massif Méridional ") whose present-day relict is the Paleozoic basement and its sedimentary cover from the Sicié imbricate. In the bay of Marseille, thick syn-rift (Rupelian to Aquitanian) deposition occurred (>1000 m). During the rifting phase, syn-sedimentary deformations consist of dominant N040 to N060 sub-vertical faults with a normal component and N050 drag-synclines and anticlines. The syn-rift and early post-rift units (Rupelian to early Burdigalian) are deformed and form a set of E-W-trending en echelon folds that may result from sinistral strike-slip reactivation of N040 to N060 normal faults during a N-S com-pressive phase of early-to-mid Burdigalian age (18-20 Ma). Finally, minor fault reactivation and local folding affect post-rift deposits within a N160-trending corridor localized south of La Couronne, and could result from a later, post-Burdigalian and pre-Pliocene compressive phase.
Cadre tectonostratigraphique des formations anté-pliocènes du plateau continental de Provence (golfe du Lion oriental, SE France) Mots-clés. – Géologie marine, Tectonostratigraphie, Stratigraphie sismique, Paléogéographie crétacée, Rifting oligo-miocène, Compression post-rift Résumé. – Le prolongement en mer des formations et des structures provençales était jusqu'alors largement inconnu.L'interprétation de profils de sismique-réflexion marine 2D et l'intégration de dragages et carottages du fond-marin ont permis d'apporter des éléments nouveaux concernant le cadre stratigraphique, structural et paléogéographique des dé-pôts anté-Messiniens du plateau continental de Provence. Sept unités sismiques post-jurassiques ont été identifiées sur les profils sismiques, cartographiées à travers le plateau continental et corrélées avec les séries affleurant à terre. Une épaisse unité apto-albienne (jusqu'à 2000 m) dont le dépôt est contrôlé par des failles E-W a été mise en évidence en mer. L'existence d'un bassin subsident au Crétacé supérieur sur le plateau continental de Provence a été confirmée par le développement d'une épaisse série de bassin (jusqu'à 1500 m) reposant en downlap sur l'Apto-Albien. Le socle mé-tamorphique de l'écaille de Sicié et sa couverture sédimentaire peut être considéré comme une relique allochtone du « Massif Méridional » ayant alimenté le Bassin sud-provençal en éléments terrigènes au Crétacé supérieur. Dans la rade de Marseille, une épaisse unité syn-rift (Rupélien à Aquitanien) a été mise en évidence (>1000 m), structurée en une série de synformes en échelon d'axe E-W et affectée par des failles d'orientation dominante N040 à N060. Sur le flanc sud des synformes, la formation de plis d'axe N050 est associée à une déformation syn-sédimentaire. La formation des synformes en échelon d'axe E-W résulterait d'une réactivation en décrochement des failles N040 à N060 pendant une phase de compression N-S dont l'âge est compris entre le Burdigalien inférieur et moyen (18-20 Ma). Enfin, les dépôts post-rift sont affectés par des déformations mineures (réactivation de failles et plis associés), le long d'un couloir d'orientation N160 à l'ouest de la baie de Marseille, attribuables à une phase de compression post-burdigalienne et anté-pliocène.
ISSN: 0037-9409

hal-01463727
https://hal-amu.archives-ouvertes.fr/hal-01463727
https://hal-amu.archives-ouvertes.fr/hal-01463727/document
https://hal-amu.archives-ouvertes.fr/hal-01463727/file/Fournier_et_al_Provence_2016.pdf
DOI : 10.2113/gssgfbull.187.4-5.187

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
Symbioses with the dinoflagellate Symbiodinium are widespread among marine invertebrates and protists, especially in nutritionally demanding habitats, such as tropical coral reefs, where they play a major role in ecosystem survival. Moreover, apart from corals and sea anemones, many of the Symbiodinium species and clades involved in these partnerships remain to be characterized. This study provides new insights into nudibranch and sponge associations with Symbiodinium by sequencing regions of the Symbiodinium 28S rDNA and the host mitochondrial COI oxidase. Specimens were sampled between 2011 and 2013 from locations around the islands of Moorea and Tahiti, French Polynesia. Our results revealed that some of the sponges and nudibranchs harbored typical Symbiodinium from clade B or C while others harbored new, undescribed Symbiodinium-like dinoflagellates. A detailed analysis of the different life stages of the nudibranch Phestilla lugubris and of its specific coral prey, Porites rus, suggests a prey-predator horizontal transfer of the symbiont and its vertical inheritance from the parent to the eggs.
Les symbioses à zooxanthelles, dinoflagellés du genre Symbiodinium, sont largement répandues chez les invertébrés marins et les protozoaires, notamment dans les eaux oligotrophes, où ils jouent un rôle important dans la survie des récifs coralliens. De plus, excepté chez les coraux et les anémones, les différentes espèces et clades de Symbiodinium impliqués dans ces associations restent à être caractérisés. Notre étude, grâce à l’utilisation des marqueurs génétiques 28S ADNr des Symbiodinium et la sous-unité 1 de la cytochrome oxydase mitochondriale (COI) de l’hôte, procure de nouvelles données quant aux associations des éponges et des nudibranches avec les Symbiodinium. L’échantillonnage a eu lieu autour de Moorea et de Tahiti (Polynésie française), entre 2011 et 2013. Nos résultats révèlent que certaines espèces d’éponges et de nudibranches possèdent les clades B et C communément retrouvés, chez les coraux notamment, alors que d’autres présentent de nouveaux dinoflagellés « Symbiodinium-like ». Une analyses détaillée des Symbiodinium à différents stades du cycle de vie du nudibranche corallivore Phestilla lugubris et de son corail hôte Porites rus suggèrent l’existence d’un transfert horizontal de Symbiodinium proie–prédateur et un transfert vertical du parent P. lugubris à ses œufs.
ISSN: 1631-0691

hal-01145518
https://hal.archives-ouvertes.fr/hal-01145518
DOI : 10.1016/j.crvi.2015.01.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
ISSN: 0176-1617

hal-01080861
https://hal-agroparistech.archives-ouvertes.fr/hal-01080861
DOI : 10.1104/pp.106.088153

Éditeur(s) : HAL CCSD Fayard/Arthème
Résumé : La biomécanique des plantes est née d'une approche interdisciplinaire. Elle regroupe ainsi des biologistes, des forestiers ou des agronomes, et des mécaniciens (des matériaux et des structures et plus récemment des fluides). Elle s'intéresse à la façon dont les plantes se portent et croissent. En particulier comment les plantes terrestres croissent en hauteur " contre " la gravité et dans le vent ; mais aussi comment les plantes aquatiques et les algues se développent dans les courants.
Aux Origines des Plantes

hal-00795935
https://hal.archives-ouvertes.fr/hal-00795935
https://hal.archives-ouvertes.fr/hal-00795935/document
https://hal.archives-ouvertes.fr/hal-00795935/file/BiomA_canique_plantes_Fournier_Moulia_Gril.pdf

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé : International audience
In the dense tropical rainforest understorey, saplings exhibit different growth strategies aiming at reaching light levels better fitting their ecology. Investing mainly in height growth, at the expense of their width, a lot are close to mechanical instability. Tachigali melinonii, a long living heliophilic tree species, is frequently observed to be extremely slender and supported by neighbours. Such observations suggest an active growth control through the perception of mechanical environment. * Mechanical environment or light availability, which one is the most influent on growth and slenderness (H/D)? To test this question, we recorded growth of control and staked saplings of two species with contrasting habits and ecology: T. melinonii, and Dicorynia guianensis, along a natural light gradient. * Dicorynia, the more stable, responded more clearly to the staking treatment, showing slenderness increase when light is available, whereas for Tachigali, only light availability governed growth. * For Tachigali, growth allocation is mainly governed by light availability and ontogeny, whereas Dicorynia is probably similar to the average tree strategy, using the thigmomorphogenetic physiological process to control its stability.
ISSN: 1286-4560

hal-00534019
https://hal.archives-ouvertes.fr/hal-00534019
DOI : 10.1051/forest/2009104

Éditeur(s) : HAL CCSD Botanical Society of America
Résumé :  
International audience
The different hypotheses about buttress function and formation mainly involve mechanical theory. Forces were applied to two trees of Sloanea spp., a tropical genus that develops typical thin buttresses, and the three-dimensional strains were measured at different parts of the trunk base. Risks of failure were greater on the buttress sides, where shear and tangential stresses are greater, not on the ridges, in spite of high longitudinal (parallel to the grain) stresses. A simple beam model, computed from the second moment of area of digitized cross sections, is consistent with longitudinal strain variations but cannot predict accurately variations with height. Patterns of longitudinal strain variation along ridges are very different in the two individuals, owing to a pronounced lateral curvature in one specimen. The constant stress hypothesis is discussed based on these results. Without chronological data during the development of the tree, it cannot be proved that buttress formation is activated by stress or strain.
ISSN: 0002-9122

hal-01032155
https://hal.archives-ouvertes.fr/hal-01032155
https://hal.archives-ouvertes.fr/hal-01032155/document
https://hal.archives-ouvertes.fr/hal-01032155/file/Biomechanics_buttressed_trees_Clair_al_2003.pdf
DOI : 10.3732/ajb.90.9.1349

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Functional ecology has long considered the support function as important, but its biomechanical complexity is only just being elucidated. We show here that it can be described on the basis of four biomechanical traits, two safety traits against winds (SW) and self-buckling (SB), and two motricity traits involved in sustaining an upright position, tropic motion velocity (MV) and posture control (PC). All these traits are integrated at the tree scale, combining tree size and shape together with wood properties. The assumption of trait constancy has been used to derive allometric scaling laws, but it was more recently found that observing their variations among environments and functional groups, or during ontogeny, provides more insights into adaptive syndromes of tree shape and wood properties. However, over-simplified expressions have often been used, possibly concealing key adaptive drivers. An extreme case of over-simplification is the use of wood basic density as a proxy for safety. Actually, since wood density is involved in stiffness, loads and construction costs, the impact of its variations on safety is non-trivial. Moreover, other wood features, especially the microfibril angle (MFA), are also involved. Furthermore, wood is not only stiff and strong, but it also acts as a motor for MV and PC. The relevant wood trait for that is maturation strain asymmetry. Maturation strains vary with cell wall characteristics such as MFA, rather than with wood density. Finally, the need for further studies about the ecological relevance of branching patterns, motricity traits and growth responses to mechanical loads is discussed.
ISSN: 0022-0957

hal-00909904
https://hal.archives-ouvertes.fr/hal-00909904
https://hal.archives-ouvertes.fr/hal-00909904/document
https://hal.archives-ouvertes.fr/hal-00909904/file/Integrative_biomechanics_for_tree_Fournier_al.pdf
DOI : 10.1093/jxb/ert279

Éditeur(s) : HAL CCSD
Résumé :  
The main aspects of wood mechanics are approached through the role played by wood as the building material of the tree. The main concepts used by nature: progressive setting up of tree weight and architecture, multifunctional role of wood and adaptability to hazard and long-term evolution, are clarified together with their consequence on the multilayered, anisotropic nature of wood. The technological choices of the plant world as the cellular structure, the use of composite with oriented fibres and hydro-carbonated polymers, as well as the systematic prestressing of every new layer, bear obvious consequences on the type of mechanical behaviour of wood. The local control of the level of prestressing through minor modifications of the cell-wall biosynthesis allows the tree to adapt to conditions of light exploration that will evolve according to time and risk occurrence. This analysis of wood genesis process permits in return to improve our understanding of the mechanical behaviour of the material in relation with the parameters of the microstructure.
Comptes Rendus de l'Académie des Sciences Série 2

hal-01032151
https://hal.archives-ouvertes.fr/hal-01032151
DOI : 10.1016/S1620-7742(01)01380-0

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Studies on tree biomechanical design usually focus on stem stiffness, resistance to breakage or uprooting, and elastic stability. Here we consider another biomechanical constraint related to the interaction between growth and gravity. Because stems are slender structures and are never perfectly symmetric, the increase in tree mass always causes bending movements. Given the current mechanical design of trees, integration of these movements over time would ultimately lead to a weeping habit unless some gravitropic correction occurs. This correction is achieved by asymmetric internal forces induced during the maturation of new wood. The long-term stability of a growing stem therefore depends on how the gravitropic correction that is generated by diameter growth balances the disturbance due to increasing self weight. General mechanical formulations based on beam theory are proposed to model these phenomena. The rates of disturbance and correction associated with a growth increment are deduced and expressed as a function of elementary traits of stem morphology, cross-section anatomy and wood properties. Evaluation of these traits using previously published data shows that the balance between the correction and the disturbance strongly depends on the efficiency of the gravitropic correction, which depends on the asymmetry of wood maturation strain, eccentric growth, and gradients in wood stiffness. By combining disturbance and correction rates, the gravitropic performance indicates the dynamics of stem bending during growth. It depends on stem biomechanical traits and dimensions. By analyzing dimensional effects, we show that the necessity for gravitropic correction might constrain stem allometric growth in the long-term. This constraint is compared to the requirement for elastic stability, showing that gravitropic performance limits the increase in height of tilted stem and branches. The performance of this function may thus limit the slenderness and lean of stems, and therefore the ability of the tree to capture light in a heterogeneous environment.
ISSN: 0022-5193

hal-00534316
https://hal.archives-ouvertes.fr/hal-00534316
DOI : 10.1016/j.jtbi.2008.10.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Cnidarian–dinoflagellate photosynthetic symbioses are fundamental to biologically diverse and productive coral reef ecosystems. The hallmark of this symbiotic relationship is the ability of dinoflagellate symbionts to supply their cnidarian host with a wide range of nutrients. Many aspects of this association nevertheless remain poorly characterized, including the exact identity of the transferred metabolic compounds, the mechanisms that control their exchange across the host–symbiont interface, and the precise subcellular fate of the translocated materials in cnidarian tissues. This lack of knowledge is mainly attributed to difficulties in investigating such metabolic interactions both in situ, i.e. on intact symbiotic associations, and at high spatial resolution. To address these issues, we illustrate the application of two in situ and high spatial resolution molecular and ion imaging techniques–matrix-assisted laser desorption ionization mass spectrometry imaging (MALDI-MSI) and the nano-scale secondary-ion mass spectrometry (NanoSIMS) ion microprobe. These imaging techniques provide important new opportunities for the detailed investigation of many aspects of cnidarian–dinoflagellate associations, including the dynamics of cellular interactions.
ISSN: 0944-2006

hal-01546914
http://hal.upmc.fr/hal-01546914
DOI : 10.1016/j.zool.2014.06.006

Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of this study is to identify links between the geothermal context and the conceptions in different initial teachers training, from the Caribbean and North America. The Caribbean Islands are located in a subduction zone, creating a great potential for geothermal energy. In Guadeloupe, this potential has been harnessed and a geothermal power plant produces about 5% of the local demand for electricity. It is called high temperature geothermy. In Quebec the bedrock mainly consists of ancient Precambrian rocks from the Canadian Shield, which does not allow for electricity production. The geothermal heat is used to regulate the temperature in buildings, to create spars, to grow crops and other purposes. It is called low temperature geothermy. This design-based research (Sandoval, W. et Al., 2004) takes part in the contextualization of sciences education research works (Blanchet, P. et Al., 2009, Anciaux, F. et Al., 2013) and in the continuation of the Gounouy project (Fecil, S. et Al., 2014). A project-based learning on geothermal energy has been set up with two groups of initial teachers training from the Université du Québec à Montréal (UQAM) and from the French West Indies University (UA). The purpose is to create collaborations between each group in order to enable them to encounter, recognize and formulate their conceptions. Further, they will collectively elaborate a more complex understanding of conceptions about geothermy. More specifically, the design used in this experiment aims to highlight context effects (Merlo-Leurette, S., Forissier, T., 2009). Context effects are pedagogical events occurring when there is a clash between the different conceptions of students, observed uring courses regarding different problematics related to geothermal energy. Communications via videoconferences were arranged so that the counterpart teams may discuss their investigative findings. Videos from the exchanges have been collected, as well as weekly summaries about student’s accomplishment, ideas, questions and feelings. Pre-test and post-test questionnaires on geothermal energy were submitted at the beginning and at the end of the project, to compare conceptions before and after the learning process. Collected data enables to bring out the student’s contextuality. Therefore, they highlight context effects, due to the differences between the geothermal contexts in Guadeloupe and in Montreal.This study is supported by the Geotref project.
CARIBBEAN ACADEMY OF SCIENCES 20 th GENERAL ASSEMBLY AND BIENNAL MEETING
Dehaies, Guadeloupe, France

hal-01534665
https://hal.univ-antilles.fr/hal-01534665

Éditeur(s) : HAL CCSD
Résumé : Proceedings of the 10th International and Interdisciplinary Conference, CONTEXT 2017, Paris, France, June 20-23, 2017
International audience
This paper presents a research project in science education that is positioned at the intersection of computer science and context in learning. The main objective is to improve learning process by creating a software tool that participates, from the inception to the achievement, in the design of leaning scenarios, based on context effects, and, to show that context effects' learning is an efficient method in the development of student's knowledge regarding a concept. The software will compute differences between two – or more – external contexts based on specific parameters, related to the phenomenon or object that students are expected to study. The elaboration of the calculator (" the MazCalc ") is conducted using the design based research theory, meaning that several iterations of learning field experiments are conducted in order to collect relevant data which are used for the tool creation. In this paper, the design of the scenario involves students from North America and from the French West Indies and the concept studied is about geothermal energy. The instantiation of the context calculator is made with the geothermal object of study, and the differences are computed in the calculator between the two contexts mentioned. This example makes possible to validate the link between context effects predicted and observed, and also to study the impact of external context on the learning process. This study has been conducted thanks to the GEOTREF project support.
Modeling and Using Context

ISBN : 978-3-319-57837-8
hal-01625781
https://hal.univ-antilles.fr/hal-01625781
https://hal.univ-antilles.fr/hal-01625781/document
https://hal.univ-antilles.fr/hal-01625781/file/Elaborating%20the%20context%20calculator%20CONTEXT2017.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
Background Orodental diseases include several clinically and genetically heterogeneous disorders that can present in isolation or as part of a genetic syndrome. Due to the vast number of genes implicated in these disorders, establishing a molecular diagnosis can be challenging. We aimed to develop a targeted next-generation sequencing (NGS) assay to diagnose mutations and potentially identify novel genes mutated in this group of disorders. Methods We designed an NGS gene panel that targets 585 known and candidate genes in orodental disease. We screened a cohort of 101 unrelated patients without a molecular diagnosis referred to the Reference Centre for Oro-Dental Manifestations of Rare Diseases, Strasbourg, France, for a variety of orodental disorders including isolated and syndromic amelogenesis imperfecta (AI), isolated and syndromic selective tooth agenesis (STHAG), isolated and syndromic dentinogenesis imperfecta, isolated dentin dysplasia, otodental dysplasia and primary failure of tooth eruption. Results We discovered 21 novel pathogenic variants and identified the causative mutation in 39 unrelated patients in known genes (overall diagnostic rate: 39%). Among the largest subcohorts of patients with isolated AI (50 unrelated patients) and isolated STHAG (21 unrelated patients), we had a definitive diagnosis in 14 (27%) and 15 cases (71%), respectively. Surprisingly, COL17A1 mutations accounted for the majority of autosomal-dominant AI cases. Conclusions We have developed a novel targeted NGS assay for the efficient molecular diagnosis of a wide variety of orodental diseases. Furthermore, our panel will contribute to better understanding the contribution of these genes to orodental disease. Trial registration numbers NCT01746121 and NCT02397824
Journal of Medical Genetics

hal-01272929
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01272929
DOI : 10.1136/jmedgenet-2015-103302
PUBMED : 26502894

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The base of the Faro contouritic drift (IODP Site U1386) on the northern margin of the Gulf of Cádiz (Algarve margin) is characterized by two sequences of frequent gravity deposits with different ages and compositions. Among these gravity deposits, several relatively thick debrites (up to 12 m) have been observed and studied in detail.Sedimentological analyses have been performed and because of non-turbulent behavior of debris flows, detailed micropaleontological studies could be realized. Planktonic foraminifera thus allowed establishing a detailed biostratigraphy of these deposits. Benthic foraminifer and ostracod assemblages were used to evaluate the origin of the sediment composing these debris flows and estimate their run-out distance.These debrites are dated from Early Pliocene and early Pleistocene, and were deposited in a mesobathyal environment. They comprise silty mud clasts and matrixes with sand content up to 34%. The Early Pliocene debrites are bioclast-rich whereas the Early Pleistocene debrite is enriched in terrigenous particles. The data indicates that these debrites were triggered on the continental shelf and traveled less than 100 km, eroding the seafloor all along their path for the Early Pliocene debrites and only the first part of their path for the early Pleistocene debrite. Matrixes originate from failure areas whereas eroded sediments along the flow pathway are incorporated into the flow as clasts.High abundance of shelf fauna during the Early Pliocene and great supply of terrigenous particles from rivers during the early Pleistocene in the south-western Iberian margin have favored gravity flows from the continental shelf to the slope. The contouritic paleo-moat of the Faro drift has been a determining channeling feature for gravity flows along the Algarve margin during the early Pleistocene, testifying of the strong interaction between MOW circulation and down-slope processes. Tectonic and diapiric activities were significant during Early Pliocene and early Pleistocene on the Algarve margin and could have been triggering parameters of failures related to these debris flows.
ISSN: 0025-3227

hal-01356172
https://hal.archives-ouvertes.fr/hal-01356172
DOI : 10.1016/j.margeo.2015.08.018

Éditeur(s) : HAL CCSD Botanical Society of America
Résumé :  
Tree buckling risk (actual height/critical buckling height) is an important biomechanical trait of plant growth strategies, and one that contributes to species coexistence. To estimate the diversity of this trait among wide samples, a method that minimizes damage to the plants is necessary. On the basis of the rarely used, complete version of Greenhill's model (1881, Proceedings of the Cambridge Philosophical Society 4(2): 65-73), we precisely measured all the necessary parameters on a sample of 236 saplings of 16 species. Then, using sensitivity (variance) analysis, regressions between successive models for risk factors and species ranks and the use of these models on samples of self- and nonself-supporting saplings, we tested different degrees of simplification up to the most simple and widely used formula that assumes that the tree is a cylindrical homogeneous pole. The size factor had the greatest effect on buckling risk, followed by the form factor and the modulus of elasticity of the wood. Therefore, estimates of buckling risk must consider not only the wood properties but especially the form factor. Finally, we proposed a simple but accurate method of assessing tree buckling risk that is applicable to a wide range of samples and that requires mostly nondestructive measurements.
ISSN: 0002-9122

hal-01032059
https://hal.archives-ouvertes.fr/hal-01032059

Éditeur(s) : HAL CCSD
Résumé : For their survival, plants need to grow in height to access light resource while ensuring their mechanical stability. Growth in height amplifies the mechanical constraints due to wind and gravity. Nevertheless these constraints represent morphogenetic signals that plants respond to by modifying their growth. There are two regulatory processes of growth by mechanical signals: thigmomorphogenesis and gravitropism. Thigmomorphogenesis expresses by a reduction of growth in height and an increase of growth in girth under the effect of mechanical signals. This is a way for plants to grow with controlling slenderness of their axes to avoid buckling (beating down). In some cases (storm, sudden exposure to a new mechanical environment) this process is not sufficient to prevent buckling, gravitropism then acts to restore axes orientation in case of no lethal buckling. With measuring several traits, we have demonstrated that these processes have a fundamental ecological role in the control of tree habit and the vertical structuration of ecosystems. As studies of climate changes seem to predict a higher frequency of storms it is important to study the diversity of their efficiency.
Colloque Adaptation au Changement Climatique de l'Agriculture et des Ecosystèmes

hal-00797377
https://hal.archives-ouvertes.fr/hal-00797377

Éditeur(s) : HAL CCSD
Résumé : International audience
Up-to-date estimates of the health outcomes of preterm children are needed for assessing perinatal care, informing parents, making decisions about care, and providing evidence for clinical guidelines. To determine survival and neonatal morbidity of infants born from 22 through 34 completed weeks' gestation in France in 2011 and compare these outcomes with a comparable cohort in 1997. The EPIPAGE-2 study is a national, prospective, population-based cohort study conducted in all maternity and neonatal units in France in 2011. A total of 2205 births (stillbirths and live births) and terminations of pregnancy at 22 through 26 weeks' gestation, 3257 at 27 through 31 weeks, and 1234 at 32 through 34 weeks were studied. Cohort data were collected from January 1 through December 31, 1997, and from March 28 through December 31, 2011. Analyses for 1997 were run for the entire year and then separately for April to December; the rates for survival and morbidities did not differ. Data are therefore presented for the whole year in 1997 and the 8-month and 6-month periods in 2011. Survival to discharge and survival without any of the following adverse outcomes: grade III or IV intraventricular hemorrhage, cystic periventricular leukomalacia, severe bronchopulmonary dysplasia, retinopathy of prematurity (stage 3 or higher), or necrotizing enterocolitis (stages 2-3). A total of 0.7% of infants born before 24 weeks' gestation survived to discharge: 31.2% of those born at 24 weeks, 59.1% at 25 weeks, and 75.3% at 26 weeks. Survival rates were 93.6% at 27 through 31 weeks and 98.9% at 32 through 34 weeks. Infants discharged home without severe neonatal morbidity represented 0% at 23 weeks, 11.6% at 24 weeks, 30.0% at 25 weeks, 47.5% at 26 weeks, 81.3% at 27 through 31 weeks, and 96.8% at 32 through 34 weeks. Compared with 1997, the proportion of infants surviving without severe morbidity in 2011 increased by 14.4% (P < .001) at 25 through 29 weeks and 6% (P < .001) at 30 through 31 weeks but did not change appreciably for those born at less than 25 weeks. The rates of antenatal corticosteroid use, induced preterm deliveries, cesarean deliveries, and surfactant use increased significantly in all gestational-age groups, except at 22 through 23 weeks. The substantial improvement in survival in France for newborns born at 25 through 31 weeks' gestation was accompanied by an important reduction in severe morbidity, but survival remained rare before 25 weeks. Although improvement in survival at extremely low gestational age may be possible, its effect on long-term outcomes requires further studies. The long-term results of the EPIPAGE-2 study will be informative in this regard.
ISSN: 2168-6211

hal-01258705
http://hal.univ-brest.fr/hal-01258705
PUBMED : 25621457
DOI : 10.1001/jamapediatrics.2014.3351

Éditeur(s) : HAL CCSD
Résumé : International audience
The anatomy of tension wood and opposite wood was compared in 21 tropical rain forest trees from 21 species belonging to 18 families from French Guyana. Wood specimens were taken from the upper and lower sides of naturally tilted trees. Measurement of the growth stress level ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile-stressed wood on the upper side, called tension wood and normally tensile-stressed wood on the lower side, called opposite wood. Quantitative parameters relating to fibres and vessels were measured on transverse sections of both tension and opposite wood to check if certain criteria can easily discriminate the two kinds of wood. We observed a decrease in the frequency of vessels in the tension wood in all the trees studied. Other criteria concerning shape and surface area of the vessels, fibre diameter or cell wall thickness did not reveal any general trend. At the ultrastructural level, we observed that the microfibril angle in the tension wood sample was lower than in opposite wood in all the trees except one (Licania membranacea).
IAWA Journal

hal-00194915
https://hal.archives-ouvertes.fr/hal-00194915
https://hal.archives-ouvertes.fr/hal-00194915/document
https://hal.archives-ouvertes.fr/hal-00194915/file/IAWA2006_RuelleClairBeauchenePrevostFournier_ccsd.pdf
IRD : PAR00001321