Éditeur(s) : HAL CCSD Walter de Gruyter
Résumé :  
A method for measuring shrinkage resulting from drying in the three anisotropic directions is developed and tested. Measurements are performed on sawn discs, a technique which simplifies preparation and enables large numbers of measurements. Shrinkage values can be represented as a map of the disc surface. The results indicate that comparisons between shrinkage distribution and tension wood distribution on the discs show a clear relationship and can be measured with relatively high accuracy in reference to the "shrinkage map". In the long term, this method could be useful in the timber industry as a means for choosing the direction in which logs are cut depending on their type of wood composition.
Holzforschung

hal-01032055
https://hal.archives-ouvertes.fr/hal-01032055
DOI : 10.1515/HF.2003.100

Éditeur(s) : HAL CCSD
Résumé :  
Wood samples were taken from the upper and lower sides of 21 naturally tilted trees from 18 families of angiosperms in the tropical rain forest in French Guyana. The measurement of growth stresses ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile stressed wood on the upper side, called tension wood, and lower tensile stressed wood on the lower side, called opposite wood. Eight species had tension wood fibres with a distinct gelatinous layer (G-layer). The distribution of gelatinous fibres varied from species to species. One of the species, Casearia javitensis (Flacourtiaceae), showed a peculiar multilayered secondary wall in its reaction wood. Comparison between the stress level and the occurrence of G-layer indicates that the G-layer is not a key factor in the production of high tensile stressed wood.
IAWA Journal

hal-01032051
https://hal.archives-ouvertes.fr/hal-01032051

Éditeur(s) : HAL CCSD
Résumé :   Diplôme : DEA
il s'agit d'un type de produit dont les métadonnées ne correspondent pas aux métadonnées attendues dans les autres types de produit : DISSERTATION
Links between architectural stages of development (ASD), photosynthetic capacities and leaf characteristics in Tachigali melinonii (Caesalpiniaceae) were investigated in the tropical forest of French Guiana. Three ASD were sampled under three light conditions to elucidate the impact of ASD- and light-related changes on photosynthetic functional traits. Photosynthetic parameters (maximum rate in RubisCO carboxylation (Vcmax) and maximum rate of electron transport (Jmax) were estimated by adjusting a biochemical model (Farquhar et al., 1980) to response curves of CO2 assimilation rate to intercellular CO2 concentration, under saturated light. In addition, N and C foliar concentrations were analysed and N allocations to the carboxylation and bioenergetic processus of photosynthesis were calculated using the model of Niinemets and Tenhunen (1997). The variations in ecophysiological parameters observed were due to leaf anatomical and structural changes instead of changes in photosynthetic components, suggesting adjustments to light conditions. Tachigali melinonii thus appears to display morphological and anatomical plasticity at different ASDs and under different light conditions.
Une espèce forestière de Guyane Française, Tachigali melinonii (Caesalipiniaceae), a été choisie afin de regarder la variation des traits fonctionnels relatifs à la photosynthèse en fonction de la disponibilité en lumière et en fonction de son stade de développement architectural. Du fait du tempérament de l'espèce vis-à-vis de la lumière de type «struggling gambler» (ombrage nécessaire aux jeunes stades puis développement en pleine lumière), trois stades clefs de développement parmi la séquence de différenciation de l'espèce ainsi que trois environnements lumineux ont été choisis. Les capacités photosynthétiques foliaires ont été estimées à partir de l'ajustement de paramètres du modèle biochimique de photosynthèse foliaire (Farquhar et al. 1980) sur des courbes de réponses de l'assimilation de CO² (A) à des concentrations intracellulaires en CO² (Ci) croissantes, en condition de lumière saturante. La vitesse maximale de carboxylation Vcmax et le flux maximal d'électrons photosynthétiques Jmax ont ainsi été estimés et ensuite reliés aux caractéristiques structurales foliaires, notamment la concentration en azote, en carbone ainsi qu'avec la densité et l’épaisseur. Les fractions d'azote allouées aux processus photosynthétiques de carboxylation et de bioénergétique ont été calculées. Des variations, dues à un effet du stade de développement sur les paramètres étudiés ainsi qu’à un effet de la quantité de lumière disponible, ont été constatées. Ces variations sont surtout liées à des ajustements anatomiques et structuraux foliaires et non à des modifications de l’appareil photosynthétique. Tachigali melinonii semble donc modifier ses caractéristiques structurales foliaires en fonction de son stade de développement, ce qui suppose un contrôle ontogénique partiel, et en fonction de la disponibilité en lumière.
https://hal.archives-ouvertes.fr/hal-01189520

hal-01189520
https://hal.archives-ouvertes.fr/hal-01189520
PRODINRA : 44951

Éditeur(s) : HAL CCSD Ecole nationale du génie rural
Résumé :  
Les bois tropicaux, et en particulier les bois de Guyane, témoignent de la biodiversité des forêts denses humides. Les atouts et contraintes liés à cette diversité sont présentés ainsi que la façon objective de classer les espèces ou essences par rapport à des critères de qualité. La variabilité de la qualité des bois est illustrée à travers quelques exemples : la qualité des arbres sur pied, la qualité non constante de l'Angélique (Dicorynia guianensis), les troncs cannelés du Wacapou (Vouacapoua americana), les différences entre deux espèces d'Eperua Spp.. La conclusion porte sur la petite filière-bois guyanaise, ses difficultés et les enjeux à relever.
ISSN: 0035-2829

hal-01031808
https://hal.archives-ouvertes.fr/hal-01031808

Éditeur(s) : HAL CCSD Fayard/Arthème
Résumé : La biomécanique des plantes est née d'une approche interdisciplinaire. Elle regroupe ainsi des biologistes, des forestiers ou des agronomes, et des mécaniciens (des matériaux et des structures et plus récemment des fluides). Elle s'intéresse à la façon dont les plantes se portent et croissent. En particulier comment les plantes terrestres croissent en hauteur " contre " la gravité et dans le vent ; mais aussi comment les plantes aquatiques et les algues se développent dans les courants.
Aux Origines des Plantes

hal-00795935
https://hal.archives-ouvertes.fr/hal-00795935
https://hal.archives-ouvertes.fr/hal-00795935/document
https://hal.archives-ouvertes.fr/hal-00795935/file/BiomA_canique_plantes_Fournier_Moulia_Gril.pdf

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé : International audience
In the dense tropical rainforest understorey, saplings exhibit different growth strategies aiming at reaching light levels better fitting their ecology. Investing mainly in height growth, at the expense of their width, a lot are close to mechanical instability. Tachigali melinonii, a long living heliophilic tree species, is frequently observed to be extremely slender and supported by neighbours. Such observations suggest an active growth control through the perception of mechanical environment. * Mechanical environment or light availability, which one is the most influent on growth and slenderness (H/D)? To test this question, we recorded growth of control and staked saplings of two species with contrasting habits and ecology: T. melinonii, and Dicorynia guianensis, along a natural light gradient. * Dicorynia, the more stable, responded more clearly to the staking treatment, showing slenderness increase when light is available, whereas for Tachigali, only light availability governed growth. * For Tachigali, growth allocation is mainly governed by light availability and ontogeny, whereas Dicorynia is probably similar to the average tree strategy, using the thigmomorphogenetic physiological process to control its stability.
ISSN: 1286-4560

hal-00534019
https://hal.archives-ouvertes.fr/hal-00534019
DOI : 10.1051/forest/2009104

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé :  
absent
ISSN: 1286-4560

hal-01032143
https://hal.archives-ouvertes.fr/hal-01032143
DOI : 10.1051/forest:2008061

Éditeur(s) : HAL CCSD
Résumé : The functioning of ecosystems is based on the functional diversity, which is the complementto the species diversity. In the tropical rain forest, the saplings grow in the dense and stratifiedunderstorey. This thesis deals with the diversity of realisation of the support function by thesaplings in this context. The hypotheses are that the race through higher and so brighter levelsconstrains the mechanical security of the saplings with necessary biomass saving and need ofreorientation (gravitropism) and acclimation (mecanoperception and response) processes andthat diversity is thus structured by the species light-demand and affinity for the risk. Using awide sample of 16 species, at the Paracou station, relevant functional traits - risk of not-selfsupportingand gravitropic performance - are defined through adapted modellings whichcombine trunk shape, biomass distribution and wood properties. The traits values varybetween species and also with ontogeny and saplings environment. These variations are dueto elementary traits (shape, biomass, wood) with strong geometrical effects. The less selfsupportingspecies (low mechanical security) have the highest gravitropic performances andare also the most light-demanders. A species, Tachigali melinonii, distinguishes itself bystrong slendernesses and a frequent not-self-supporting habit letting suppose a strongadaptability to its mechanical environment. An experiment (growth response to staking),however, did not provide the expected results whereas the species with lower risks, Dicoryniaguianensis, reacted more.
Le fonctionnement des écosystèmes repose sur la diversité fonctionnelle, complément de ladiversité spécifique. En forêt tropicale humide, les jeunes arbres croissent en sous-bois denseet stratifié. Cette thèse porte sur la diversité de réalisation de la fonction biomécanique desoutien. Les hypothèses sont que la "course" vers les strates plus éclairées contraint lasécurité mécanique des jeunes arbres, avec de nécessaires économies de matière et recours àdes processus de réparation (gravitropisme) et d'acclimatation (mécanoperception et réponse),et que la diversité est donc structurée par le besoin en lumière et l'affinité pour le risque desespèces. Avec un échantillon de 16 espèces sur le dispositif de Paracou, des traits fonctionnelspertinents - risque de non-autoportance et performance gravitropique - sont définis au traversde modélisations adaptées qui combinent forme des troncs, répartition des masses etpropriétés du bois. Ces traits varient entre espèces mais aussi avec le développement etl'environnement des arbres. Ces variations sont dues aux variations des traits élémentaires(forme, masses, bois) avec de forts effets géométriques. Les espèces les moins autoportantes(faible sécurité) ont les plus fortes performances gravitropiques. Ce sont aussi les plusdemandeuses de lumière. Une espèce Tachigali melinonii se distingue par de fortsélancements et une fréquente non-autoportance laissant supposer une adaptabilité forte àl'environnement mécanique. Une expérimentation (réponse de croissance au tuteurage) n'acependant pas abouti aux résultats supposés puisque c'est au contraire l'espèce à faible risque,Dicorynia guianensis, qui s'est montrée plus réactive.
https://tel.archives-ouvertes.fr/tel-00272100

tel-00272100
https://tel.archives-ouvertes.fr/tel-00272100
https://tel.archives-ouvertes.fr/tel-00272100/document
https://tel.archives-ouvertes.fr/tel-00272100/file/TheseJaouen.pdf

Éditeur(s) : HAL CCSD Botanical Society of America
Résumé :  
International audience
The different hypotheses about buttress function and formation mainly involve mechanical theory. Forces were applied to two trees of Sloanea spp., a tropical genus that develops typical thin buttresses, and the three-dimensional strains were measured at different parts of the trunk base. Risks of failure were greater on the buttress sides, where shear and tangential stresses are greater, not on the ridges, in spite of high longitudinal (parallel to the grain) stresses. A simple beam model, computed from the second moment of area of digitized cross sections, is consistent with longitudinal strain variations but cannot predict accurately variations with height. Patterns of longitudinal strain variation along ridges are very different in the two individuals, owing to a pronounced lateral curvature in one specimen. The constant stress hypothesis is discussed based on these results. Without chronological data during the development of the tree, it cannot be proved that buttress formation is activated by stress or strain.
ISSN: 0002-9122

hal-01032155
https://hal.archives-ouvertes.fr/hal-01032155
https://hal.archives-ouvertes.fr/hal-01032155/document
https://hal.archives-ouvertes.fr/hal-01032155/file/Biomechanics_buttressed_trees_Clair_al_2003.pdf
DOI : 10.3732/ajb.90.9.1349

Éditeur(s) : HAL CCSD
Résumé :   Diplôme : DEA
il s'agit d'un type de produit dont les métadonnées ne correspondent pas aux métadonnées attendues dans les autres types de produit : DISSERTATION
La lumière est le principal facteur limitant de la croissance en forêt tropicale humide. Malgré 1% du rayonnement incendie disponible en sous-bois, les jeunes arbres doivent rejoindre la canopée pour assurer la régénération du couvert. La compétition pour l'accès à la lumière est forte, et leur stabilité mécanique est souvent perturbée. La gravité étant un facteur omniprésent , tout déséquilibre entraîne des flexions de l'arbre et peut-être dramatique. Les arbres peuvent cependant palier ces déséquilibres en réorientant leurs axes par gravitropisme. Les "moteurs" des réorientations dans les axes lignifiés, sont la croissance radiale, la différentiation de bois de réaction et souvent, une croissance radiale excentrée.La capacité au redressement dépend aussi des dimensions des axes. Ces différents paramètres modulent donc la réponse gravitropique. Les réorientations dépendent de la croissance et donc également des ressources en lumière. Ce travail avait pour buts de quantifier l'impact de la croissance radiale sur le redressement d'une espèce tropicale et de mettre en évidence d'éventuelles différences d'efficience, de réorientation des arbres en fonction de la disponibilité en lumière. La réponse gravitropique de jeunes Symphonia globulifera artificiellement inclinés a été étudiée sous deux niveaux de lumière (1% et 25%°). L'importance de la croissance radiale dans la réaction gravitropique a été quantifiée par une analyse cinématique du redressement et l'utilisation d'un modèle biomécanique simple. Ce travail montre que même à 1% de lumière, les arbres ont une réponse gravitropique. L'efficience de réaction est d'ailleurs plus forte qu'à 25% de lumière. Cette réaction semble donc être une fonction prédominante pour les plantes en sous-bois. Nous avons également montré que le redressement est fortement corrélé à la vitesse de croissance radiale. Les données obtenues complètent celles déjà acquises sur des espèces tempérées. Elles permettront des comparaisons interspécifiques du processus gravitropique et serviront à valider des modèles biomécaniques plus complexes que celui utilisé dans cette étude.
https://hal.archives-ouvertes.fr/hal-01189227

hal-01189227
https://hal.archives-ouvertes.fr/hal-01189227
PRODINRA : 16967

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Functional ecology has long considered the support function as important, but its biomechanical complexity is only just being elucidated. We show here that it can be described on the basis of four biomechanical traits, two safety traits against winds (SW) and self-buckling (SB), and two motricity traits involved in sustaining an upright position, tropic motion velocity (MV) and posture control (PC). All these traits are integrated at the tree scale, combining tree size and shape together with wood properties. The assumption of trait constancy has been used to derive allometric scaling laws, but it was more recently found that observing their variations among environments and functional groups, or during ontogeny, provides more insights into adaptive syndromes of tree shape and wood properties. However, over-simplified expressions have often been used, possibly concealing key adaptive drivers. An extreme case of over-simplification is the use of wood basic density as a proxy for safety. Actually, since wood density is involved in stiffness, loads and construction costs, the impact of its variations on safety is non-trivial. Moreover, other wood features, especially the microfibril angle (MFA), are also involved. Furthermore, wood is not only stiff and strong, but it also acts as a motor for MV and PC. The relevant wood trait for that is maturation strain asymmetry. Maturation strains vary with cell wall characteristics such as MFA, rather than with wood density. Finally, the need for further studies about the ecological relevance of branching patterns, motricity traits and growth responses to mechanical loads is discussed.
ISSN: 0022-0957

hal-00909904
https://hal.archives-ouvertes.fr/hal-00909904
https://hal.archives-ouvertes.fr/hal-00909904/document
https://hal.archives-ouvertes.fr/hal-00909904/file/Integrative_biomechanics_for_tree_Fournier_al.pdf
DOI : 10.1093/jxb/ert279

Éditeur(s) : HAL CCSD
Résumé :  
The main aspects of wood mechanics are approached through the role played by wood as the building material of the tree. The main concepts used by nature: progressive setting up of tree weight and architecture, multifunctional role of wood and adaptability to hazard and long-term evolution, are clarified together with their consequence on the multilayered, anisotropic nature of wood. The technological choices of the plant world as the cellular structure, the use of composite with oriented fibres and hydro-carbonated polymers, as well as the systematic prestressing of every new layer, bear obvious consequences on the type of mechanical behaviour of wood. The local control of the level of prestressing through minor modifications of the cell-wall biosynthesis allows the tree to adapt to conditions of light exploration that will evolve according to time and risk occurrence. This analysis of wood genesis process permits in return to improve our understanding of the mechanical behaviour of the material in relation with the parameters of the microstructure.
Comptes Rendus de l'Académie des Sciences Série 2

hal-01032151
https://hal.archives-ouvertes.fr/hal-01032151
DOI : 10.1016/S1620-7742(01)01380-0

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Studies on tree biomechanical design usually focus on stem stiffness, resistance to breakage or uprooting, and elastic stability. Here we consider another biomechanical constraint related to the interaction between growth and gravity. Because stems are slender structures and are never perfectly symmetric, the increase in tree mass always causes bending movements. Given the current mechanical design of trees, integration of these movements over time would ultimately lead to a weeping habit unless some gravitropic correction occurs. This correction is achieved by asymmetric internal forces induced during the maturation of new wood. The long-term stability of a growing stem therefore depends on how the gravitropic correction that is generated by diameter growth balances the disturbance due to increasing self weight. General mechanical formulations based on beam theory are proposed to model these phenomena. The rates of disturbance and correction associated with a growth increment are deduced and expressed as a function of elementary traits of stem morphology, cross-section anatomy and wood properties. Evaluation of these traits using previously published data shows that the balance between the correction and the disturbance strongly depends on the efficiency of the gravitropic correction, which depends on the asymmetry of wood maturation strain, eccentric growth, and gradients in wood stiffness. By combining disturbance and correction rates, the gravitropic performance indicates the dynamics of stem bending during growth. It depends on stem biomechanical traits and dimensions. By analyzing dimensional effects, we show that the necessity for gravitropic correction might constrain stem allometric growth in the long-term. This constraint is compared to the requirement for elastic stability, showing that gravitropic performance limits the increase in height of tilted stem and branches. The performance of this function may thus limit the slenderness and lean of stems, and therefore the ability of the tree to capture light in a heterogeneous environment.
ISSN: 0022-5193

hal-00534316
https://hal.archives-ouvertes.fr/hal-00534316
DOI : 10.1016/j.jtbi.2008.10.011

Éditeur(s) : HAL CCSD Botanical Society of America
Résumé :  
Tree buckling risk (actual height/critical buckling height) is an important biomechanical trait of plant growth strategies, and one that contributes to species coexistence. To estimate the diversity of this trait among wide samples, a method that minimizes damage to the plants is necessary. On the basis of the rarely used, complete version of Greenhill's model (1881, Proceedings of the Cambridge Philosophical Society 4(2): 65-73), we precisely measured all the necessary parameters on a sample of 236 saplings of 16 species. Then, using sensitivity (variance) analysis, regressions between successive models for risk factors and species ranks and the use of these models on samples of self- and nonself-supporting saplings, we tested different degrees of simplification up to the most simple and widely used formula that assumes that the tree is a cylindrical homogeneous pole. The size factor had the greatest effect on buckling risk, followed by the form factor and the modulus of elasticity of the wood. Therefore, estimates of buckling risk must consider not only the wood properties but especially the form factor. Finally, we proposed a simple but accurate method of assessing tree buckling risk that is applicable to a wide range of samples and that requires mostly nondestructive measurements.
ISSN: 0002-9122

hal-01032059
https://hal.archives-ouvertes.fr/hal-01032059

Éditeur(s) : HAL CCSD
Résumé : International audience
The anatomy of tension wood and opposite wood was compared in 21 tropical rain forest trees from 21 species belonging to 18 families from French Guyana. Wood specimens were taken from the upper and lower sides of naturally tilted trees. Measurement of the growth stress level ensured that the two samples were taken from wood tissues in a different mechanical state: highly tensile-stressed wood on the upper side, called tension wood and normally tensile-stressed wood on the lower side, called opposite wood. Quantitative parameters relating to fibres and vessels were measured on transverse sections of both tension and opposite wood to check if certain criteria can easily discriminate the two kinds of wood. We observed a decrease in the frequency of vessels in the tension wood in all the trees studied. Other criteria concerning shape and surface area of the vessels, fibre diameter or cell wall thickness did not reveal any general trend. At the ultrastructural level, we observed that the microfibril angle in the tension wood sample was lower than in opposite wood in all the trees except one (Licania membranacea).
IAWA Journal

hal-00194915
https://hal.archives-ouvertes.fr/hal-00194915
https://hal.archives-ouvertes.fr/hal-00194915/document
https://hal.archives-ouvertes.fr/hal-00194915/file/IAWA2006_RuelleClairBeauchenePrevostFournier_ccsd.pdf
IRD : PAR00001321

Éditeur(s) : HAL CCSD
Résumé : For their survival, plants need to grow in height to access light resource while ensuring their mechanical stability. Growth in height amplifies the mechanical constraints due to wind and gravity. Nevertheless these constraints represent morphogenetic signals that plants respond to by modifying their growth. There are two regulatory processes of growth by mechanical signals: thigmomorphogenesis and gravitropism. Thigmomorphogenesis expresses by a reduction of growth in height and an increase of growth in girth under the effect of mechanical signals. This is a way for plants to grow with controlling slenderness of their axes to avoid buckling (beating down). In some cases (storm, sudden exposure to a new mechanical environment) this process is not sufficient to prevent buckling, gravitropism then acts to restore axes orientation in case of no lethal buckling. With measuring several traits, we have demonstrated that these processes have a fundamental ecological role in the control of tree habit and the vertical structuration of ecosystems. As studies of climate changes seem to predict a higher frequency of storms it is important to study the diversity of their efficiency.
Colloque Adaptation au Changement Climatique de l'Agriculture et des Ecosystèmes

hal-00797377
https://hal.archives-ouvertes.fr/hal-00797377

Éditeur(s) : HAL CCSD Springer-Verlag Berlin Heidelberg
Résumé : International audience
The main biological function of reaction wood is to act as " muscle " for trees, enabling them to control their posture. The key property to achieve this function is the development of high mechanical stress during the formation of reaction wood cells, called " maturation strains ". Actually, reaction wood formation is basically the asymmetric formation of wood around the tree circumference, with higher maturation strains on the side where reaction wood is formed than on the opposite side. This asymmetry enables stems to bend upward or to compensate for the downward bending induced by gravity. At the cross section level, the performance in this biological function is linked not only to the magnitude of this asymmetry but also to an effect of the cross-sectional size (diameter) of the stem. Eccentric growth and variations in wood mechanical stiffness are second order effects that can modify this performance. Differences in maturation strains between reaction and non-reaction woods are related to their specific cell wall structure and composition. The swelling of the cell wall matrix during maturation and the effect of microfibril angle explain the differences in maturation strains between normal and compression wood. However, this mechanism fails in explaining the high maturation shrinkage of tension wood, and several hypotheses at the molecular levels are still under debate. How trees perceive their gravitational disequilibrium is also an open question for physiologists. Integrative biomechanical modelling (from the polymer level to the cell wall, cross section and whole tree levels) enables defining key variables that explain the performance of reaction wood as a system that insures the stem motricity. Maturation strains can be precisely measured only in recently formed wood at the tree surface, but their changes during the whole tree life can also be estimated by retrospective dendrochronological analysis through structural markers of reaction wood. Lastly, wood in living trees ensures general storage, defence, vascular and skeletal functions, that ask general questions about synergies and trade-offs as the structural characteristics of reaction wood can affect all these functions.
The Biology of Reaction Wood

ISBN : 978-3-642-10813-6
hal-01452085
https://hal.archives-ouvertes.fr/hal-01452085
https://hal.archives-ouvertes.fr/hal-01452085/document
https://hal.archives-ouvertes.fr/hal-01452085/file/Chap_Gril_al_Biomechanical_action_biological_functions_2014.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Gravitropism is necessary for plants to control the orientation of their axes while they grow in height. In woody plants, stem re-orientations are costly because they are achieved through diameter growth. The functional diversity of gravitropism was studied to check if the mechanisms involved and their efficiency may contribute to the differentiation of height growth strategies between forest tree species at the seedling stage. Seedlings of eight tropical species were grown tilted in a greenhouse, and their up-righting movement and diameter growth were measured during three months. Morphological, anatomical and biomechanical traits were measured at the end of the survey. Curvature analysis was used to analyse the up-righting response along the stems. Variations in stem curvature depend on diameter growth, size effects, the increase in self-weight, and the efficiency of the gravitropic reaction. A biomechanical model was used to separate these contributions. Results showed that (1) gravitropic movements were based on a common mechanism associated to similar dynamic patterns, (2) clear differences in efficiency (defined as the change in curvature achieved during an elementary diameter increment for a given stem diameter) existed between species, (3) the equilibrium angle of the stem and the anatomical characters associated to the efficiency of the reaction also differed between species, (4) the differences in gravitropic reaction were related to the light requirements: heliophilic species, compared to more shade-tolerant species, had a larger efficiency and an equilibrium angle closer to vertical. This suggests that traits determining the gravitropic reaction are related to the strategy of light interception and may contribute to the differentiation of ecological strategies promoting the maintenance of biodiversity in tropical rain forests.
ISSN: 0022-0957

hal-00797023
https://hal.archives-ouvertes.fr/hal-00797023
https://hal.archives-ouvertes.fr/hal-00797023/document
https://hal.archives-ouvertes.fr/hal-00797023/file/Functional_diversity_gravitropic_Almeras_al.pdf

Éditeur(s) : HAL CCSD
COST E50 Workshop: Reaction wood formation at stand, tree and cellular level

hal-00797326
https://hal.archives-ouvertes.fr/hal-00797326

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option A
Résumé :  
absent
Journal of Experimental Botany

hal-01032195
https://hal.archives-ouvertes.fr/hal-01032195
DOI : 10.1093/jxb/erp276