Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Large sand intrusions often exhibit conical morphologies analogous to magmatic intrusions such as saucer-shaped or cup-shaped sills. Whereas some physical processes may be similar, we show with scaled experiments that the formation of conical sand intrusions may be favoured by the pore-pressure gradients prevailing in the host rock before sand injection. Our experiments involve injecting air into a permeable and cohesive analogue material to produce hydraulic fractures while controlling the pore pressure field. We control the state of overpressure in the overburden by applying homogeneous basal pore pressure, and then adding a second local pore pressure field by injecting air via a central injector to initiate hydraulic fractures near the injection point. In experiments involving small vertical effective stresses (small overburden, or high pore fluid overpressure), the fracturing pressure (lambda(fract)) is supralithostatic and two dipping fractures are initiated at the injection point forming a conical structure. From theoretical considerations, we predict that high values of lambda(fract), are due to strong cohesion or high pore fluid overpressure distributed in the overburden. Such conditions are favoured by the pore pressure/stress coupling induced by both pore pressure fields. The dips of cones can be accounted for elastic-stress rotation occurring around the source. Contrary to magmatic chamber models, the aqueous fluid overpressure developed in a parent sandbody (and prevailing before the formation of injectites) may diffuse into the surrounding overburden, thus favouring stress rotation and the formation of inclined sheets far from the parent source. For experiments involving higher vertical effective stresses (thick overburden or low pore fluid overpressure), the fracturing pressure is lower than the lithostatic stress, and a single fracture is opened in mode I which then grows vertically. At a critical depth, the fracture separates into two dilatant branches forming a flat cone. We make use of a P.I.V. (Particle Imaging Velocimetiy) technique to analyse plastic deformation, showing that these inclined fractures are opened in mixed modes. Close to the surface, they change into steep shear bands where fluids can infiltrate. The final morphology of the fracture network is very similar to the common tripartite architecture of various injection complexes, indicating that different mechanisms may be involved in the formation of dykes. Feeder dykes under the sill zones may open as tensile fractures, while overlying dykes may be guided by the deformation induced by the growth of sills. These deformation conditions may also favour the formation of fluid escape structures and pockmarks. (C) 2011 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00745640
https://hal.archives-ouvertes.fr/hal-00745640
DOI : 10.1016/j.epsl.2011.10.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A large sand injectite network is very well exposed in the area of Bevons, Southeast France. The associated sandstone turbiditic channel–fill and the host marls are the Aptian–Albian rocks of the Vocontian Basin. The sand injection network is composed of dykes, sills and sedimentary laccoliths ranging in thickness from mm to pluri–m. The dykes and sills have vertical and horizontal lengths of up to and over 100 m and 1 km, respectively. Outcrop observations show that the architecture and morphology of the sand injectites in the marls is governed by the local stress field during injection, pre–existing faults, the host–rock lithology, compaction, and distance to the potential sand source(s). The main set of dykes is oriented N50–60° perpendicular to the minimum compressive stress σ3 during sand injection. Two other sets of dykes are intruded along pre–existing syn–sedimentary faults oriented N140–150° (set 2) and N90° (set 3) during the Apto–Cenomanian interval. Sills and dykes thin laterally away from their potential sand sources and thin laterally away from them. The vertical thickness variations of the dykes and wings are more complex, as thinning away from the sand sources is often compensated by thickening toward the palaeo–surface. Based on field observations and measurements, we characterized the 3D architecture of the sand injectites and showed that the injectites probably formed due to a forceful injection from an overpressured sand body sealed by low–permeability lithologies.
ISSN: 0191-8141

hal-01243488
https://hal.archives-ouvertes.fr/hal-01243488
DOI : 10.1016/j.jsg.2015.07.001

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Large-scale conical and saucer-shaped sand injectites have been identified in the Upper Miocene sediments of the Lower Congo Basin. These structures are evidenced on the 3D high-resolution seismic data at about 600 ms TWT (two-way traveltime) beneath the seabed. The conical and saucer-shaped anomalies range from 20 to 80 m in height, 50 to 300 m in diameter, and 10 to 20 ms TWT in thickness. They are located within a sedimentary interval of about 100 m in thickness and are aligned over 20 km in dip direction (NE-SW), above the NW margin of an underlying Upper Miocene submarine fan. We have interpreted the conical and saucer-shaped anomalies as upward-emplaced sand injectites sourced from the Upper Miocene fan because of their discordant character, the postsedimentary uplifting of the sediments overlying the cones and saucer-shaped bodies, the alignment with the lateral fringe of the Upper Miocene submarine fan, and the geological context. Sand injection dates from the Miocene-Pliocene transition (approximately 5.3 Ma). The prerequisite overpressure to the sand injection process may be due to the buoyancy effect of hydrocarbons accumulated in the margins of the fan. Additionally, overpressure could have been enhanced by the lateral transfer of fluids operating in the inclined margins of the lobe. The short duration of sand injection and the presence of many sandstone intrusions suggested that the process of injection was triggered by an event, likely due to a nearby fault displacement related to diapiric movements. This is the first time that sand injectites of seismic scale have been described from the Lower Congo Basin. The localized nature of these injectites has led to a change in the migration path of fluids through the sedimentary cover. Consequently, the sand intrusions are both evidence and vectors of fluid migration within the basin fill.
ISSN: 1468-8115

hal-00963594
https://hal.archives-ouvertes.fr/hal-00963594
DOI : 10.1111/gfl.12057

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The geologic evolution of the South Armenian Block (SAB) in the Mesozoic is reconstructed from a structural, metamorphic, and geochronologic study including U–Pb and 40Ar/39Ar dating. The South Armenian Block Crystalline Basement (SABCB) outcrops solely in a narrow tectonic window, NW of Yerevan. The study of this zone provides key and unprecedented information concerning closing of the Northern Neotethys oceanic domain north of the Taurides-Anatolides platform from the Middle Jurassic to the Early Cretaceous. The basement comprises of presumed Proterozoic orthogneiss overlain by metamorphosed pelites as well as intrusions of granodiorite and leucogranite during the Late Jurassic and Early Cretaceous. Structural, geochronological and petrological observations show a multiphased evolution of the northern margin of the SAB during the Late Jurassic and Early Cretaceous. A south-dipping subduction under the East Anatolian Platform-South Armenian Block (EAP-SAB) is proposed in order to suit recent findings pertaining emplacement of relatively hot subduction related granodiorite as well as the metamorphic evolution of the crystalline basement in the Lesser Caucasus area. The metamorphism is interpreted as evidencing: (1) M1 Barrovian MP–MT conditions (staurolite–kyanite) at c. 157–160 Ma and intrusion of dioritic magmas at c. 150–156 Ma, (2) near-adiabatic decompression is featured by partial melting and production of leucogranites at c. 153 Ma, followed by M2 HT–LP conditions (andalusite–K-feldspar). A phase of shearing and recrystallization is ascribed to doming at c. 130–150 Ma and cooling at 400 °C by c. 123 Ma (M3). Structural observations show (1) top to the north shearing during M1 and (2) radial extension during M2. The extensional event ends by emplacement of a thick detrital series along radial S, E and W-dipping normal faults. Further, the crystalline basement is unconformably covered by Upper Cretaceous-Paleocene series dated by nannofossils, evolving from Maastrichtian marly sandstones to Paleocene limestones.
ISSN: 0743-9547

hal-01174077
https://hal.archives-ouvertes.fr/hal-01174077
DOI : 10.1016/j.jseaes.2014.07.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Gold mineralisation in the Yatela Main gold mine is hosted in a saprolitic residuum situated above Birimian supracrustal rocks, and at depth. The supracrustal rocks comprise metamorphosed calcitic and dolomitic marbles that were intruded by diorite (2106 ± 10 Ma, 207Pb/206Pb), and sandstone-siltstone-shale sequences (youngest detrital zircon population dated at 2139 ± 6 Ma). In-situ gold-sulphide mineralisation is associated with hydrothermal activity synchronous to emplacement of the diorite and forms a sub-economic resource; however, the overlying saprolitic residuum hosts economic gold mineralisation in friable lateritized palaeosols and aeolian sands (loess).Samples of saprolitic residuum were studied to investigate the morphology and composition of gold grains as a proxy for distance from source (and possible exploration vector) because the deposit hosts both angular and detrital gold suggesting both proximal and distal sources. U–Pb geochronology of detrital zircons also indicated a proximal and distal source, with the age spectra giving Archaean (2.83–3.28 Ga), and Palaeoproterozoic (1.95–2.20 Ga) to Neoproterozoic (1.1–1.8 Ga) zircons in the Yatela depocentre. The 1.1–1.8 Ga age spectrum restricts the maximum age for the first deposition of the sedimentary units in the Neoproterozoic, or during early deposition in the Taoudeni Basin. Models for formation of the residuum include distal and proximal sources for detritus into the depocentre, however, it is more likely that material was sourced locally and included recycled material. The creation of a deep laterite weathering profile and supergene enrichment of the residuum probably took place during the mid-Cretaceous-early Tertiary.
ISSN: 0899-5362

hal-01277679
https://hal.archives-ouvertes.fr/hal-01277679
DOI : 10.1016/j.jafrearsci.2015.07.017

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
In south China the Lushan massif forms a topographic high of the South China Block south of the Qinling-Dabie belt. The Lushan massif consists of two main lithotectonic units separated by a major tectonic contact: a Neoproterozoic (upper Sinian)-Paleozoic unit comprising primarily unmetamorphosed sandstones overlies a Paleoproterozoic unit mainly composed of low-pressure, high-temperature gneisses and micaschists. Both units are cut by Cretaceous granitic intrusions. Three primary tectono-metamorphic and magmatic events are recognized. The eastern part of the Lushan massif is cut by a NNE-SSW trending ductile normal fault (D3 deformation) coeval to the emplacement of a 100-110 Ma leucogranite dated by 40Ar/39Ar laserprobe on biotite and muscovite. D2 deformation is responsible for the formation of a decakilometer-scale NE-SW trending upright anticline characterized by NE-SW stretching and NW-SE shortening. The age of this folding event is defined by a 127±1 (2σ) Ma U/Pb titanite date obtained for a syntectonic granodiorite and 40Ar/39Ar ages of 133 Ma for amphibole. This Cretaceous age also corresponds to the 40Ar/39Ar ages of 126 Ma found on syntectonic muscovites at the base of the Sinian unit. An older deformation event, D1, characterized by a top-to-the-NW extensional decollement of the Sinian-Paleozoic series above Proterozoic metamorphic rocks is related to the Triassic tectonics of the Dabieshan. Lastly, in the lower part of Sinian rocks, the occurrence of kyanite cataclased during D1 documents an older, poorly preserved, late Paleozoic-early Mesozoic tectonometamorphic event (Dx) related to a blind thrust in the continental crust of the South China Block in the southern foreland of the Dabieshan.
ISSN: 0278-7407

insu-00717721
https://hal-insu.archives-ouvertes.fr/insu-00717721
https://hal-insu.archives-ouvertes.fr/insu-00717721/document
https://hal-insu.archives-ouvertes.fr/insu-00717721/file/Lin-Tectonics-2000.pdf
DOI : 10.1029/2000TC900009