Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
This paper aims to decipher the thermal evolution of the Montagne Noire Axial Zone (MNAZ,southern French Massif Central) gneiss core and its metasedimentary cover through determination ofP–T paths and temperature gradients. Migmatitic gneiss from the core of the dome record a clock-wise evolution culminating at 725 25 °C and 0.8 0.1 GPa with partial melting, followed by adecompression path with only minor cooling to 690 25° C and 0.4 0.1 GPa. Field structuralanalyses as well as detailed petrological observations interpreted in a petrogenetic grid indicate thatthe cover sequence experienced LP-HT metamorphism at <0.4 GPa. Apparent thermal gradientswithin the cover were determined with garnet–biotite thermometry and Raman Spectroscopy on Car-bonaceous Matter. High-temperature apparent gradients (e.g. 530 °C km1 along one transect) areexplained by late brittle–ductile extensional shearing evidenced by phyllonites that post-date peakmetamorphism. In areas where normal faults are less abundant and closely spaced, gradients of 20to 50 °C km1 are calculated. These gradients can be accounted for by a combination of domeemplacement and ductile shearing (collapse of isotherms), without additional heat input. Finally, thethermal evolution of the MNAZ is typical for many gneiss domes worldwide as well as with otherLP-HT terranes in the Variscides.
ISSN: 0263-4929

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01290388
https://hal-insu.archives-ouvertes.fr/insu-01290388
https://hal-insu.archives-ouvertes.fr/insu-01290388/document
https://hal-insu.archives-ouvertes.fr/insu-01290388/file/jmg12188.pdf
DOI : 10.1111/jmg.12188

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A detailed rock-magnetic and archeointensity study was carried out on materials baked by a western Mexican artisan following traditional techniques to produce faithful reproductions of archeological pieces of the Michoacan region (Western Mesoamerica). The field strength at the site (41.0 +/- 0.51 mu T) was measured with a fluxgate magnetometer and the temperature of the furnace during the baking process was monitored continually by means of a thermocouple placed in the middle of the baking cavity.;Rock-magnetic experiments performed on the raw material (clay and paste) and on in situ prepared baked ceramics and bricks included measurement of thermomagnetic curves (susceptibility and strong-field magnetization versus temperature), first-order reversal curves (FORC), anisotropy of magnetic susceptibility (AMS) and anisotropy of thermoremanent magnetization (A-TRM). Magnetite and probably hematite are present in the samples as carriers of the remanence. Hysteresis ratios suggest that the samples fall in the pseudo-single-domain grain size region, which may indicate a mixture of multidomain and a significant amount of single-domain grains.;Ceramic pieces and brick fragments were subjected to the Thellier-Coe archeointensity method and to an alternative paleointensity experiment, with a TRIAXE magnetometer, in order to check whether they are faithful recorders of the local geomagnetic field strength.;Mean raw-intensity of sample M1 (pottery) overestimates a 7% the expected site intensity, while those corresponding to the brick samples (LQ1 and LQ2) underestimate it 15%. Brick sample LNQ shows a slightly lower intensity (7%), but agrees with the expected site intensity within the experimental uncertainty. The intensity retrieved from the volcanic fragment also included closely reproduces the expected intensity. After A-TRM and cooling-rate corrections, all mean raw values move closer to the expected intensity.;Measurement of temperatures at different parts inside the kiln (bottom and upper parts of both central and peripheral parts) revealed the existence of significant thermal gradients, similar to those observed in ovens from other localities. Different cooling rates are then expected in a single oven.;The scatter in the intensity determinations observed in this study, retrieved from pieces elaborated together in the same oven, could arise from this differentiated cooling rate within the oven and thus, to an inappropriate cooling rate correction in the archeointensity protocol. As this situation was probably reproduced in the baking of ancient ceramic artifacts, a better knowledge of the temperature distribution inside these types of kiln would be desirable in order to choose the appropriate cooling rate correction.
ISSN: 0031-9201

hal-00644559
https://hal.archives-ouvertes.fr/hal-00644559
DOI : 10.1016/j.pepi.2011.06.007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The lithospheric mantle is intrinsically heterogeneous and anisotropic. These two properties govern the repartition of deformation, controlling intraplate strain localization and development of new plate boundaries. Geophysical and geological observations provide clues on the types, ranges, and characteristic length scales of heterogeneity and anisotropy in the lithospheric mantle. Seismic tomography points to variations in geothermal gradient and hence in rheological behavior at scales of hundreds of km. Seismic anisotropy data substantiate anisotropic physical properties consistent at scales of tens to hundreds of km. Receiver functions imply lateral and vertical heterogeneity at scales < 10 km, which might record gradients in composition or anisotropy. Observations on naturally deformed peridotites establish that compositional heterogeneity and Crystal Preferred Orientations (CPOs) are ubiquitous from the mm to the km scales. These data allow discussing the processes that produce/destroy heterogeneity and anisotropy and constraining the time scales over which they are active. This analysis highlights: (i) the role of deformation and reactive percolation of melts and fluids in producing compositional and structural heterogeneity and the feedbacks between these processes, (ii) the weak mechanical effect of mineralogical variations, and (iii) the low volumes of fine-grained microstructures and difficulty to preserve them. In contrast, olivine CPO and the resulting anisotropy of mechanical and thermal properties are only modified by deformation. Based on this analysis, we propose that strain localization at the plate scale is, at first order, controlled by large-scale variations in thermal structure and in CPO-induced anisotropy. In cold parts of the lithospheric mantle , grain size reduction may contribute to strain localization, but the low volume of fine-grained domains limits this effect.
ISSN: 0040-1951

hal-01277174
https://hal.archives-ouvertes.fr/hal-01277174
DOI : 10.1016/j.tecto.2015.07.026

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Temperature and fluid pressure conditions control rock deformation and mineralization on geological faults, and hence the distribution of earthquakes1. Typical intraplate continental crust has hydrostatic fluid pressure and a near-surface thermal gradient of 31 ± 15 degrees Celsius per kilometre2, 3. At temperatures above 300–450 degrees Celsius, usually found at depths greater than 10–15 kilometres, the intra-crystalline plasticity of quartz and feldspar relieves stress by aseismic creep and earthquakes are infrequent. Hydrothermal conditions control the stability of mineral phases and hence frictional–mechanical processes associated with earthquake rupture cycles, but there are few temperature and fluid pressure data from active plate-bounding faults. Here we report results from a borehole drilled into the upper part of the Alpine Fault, which is late in its cycle of stress accumulation and expected to rupture in a magnitude 8 earthquake in the coming decades4, 5. The borehole (depth 893 metres) revealed a pore fluid pressure gradient exceeding 9 ± 1 per cent above hydrostatic levels and an average geothermal gradient of 125 ± 55 degrees Celsius per kilometre within the hanging wall of the fault. These extreme hydrothermal conditions result from rapid fault movement, which transports rock and heat from depth, and topographically driven fluid movement that concentrates heat into valleys. Shear heating may occur within the fault but is not required to explain our observations. Our data and models show that highly anomalous fluid pressure and temperature gradients in the upper part of the seismogenic zone can be created by positive feedbacks between processes of fault slip, rock fracturing and alteration, and landscape development at plate-bounding faults.
ISSN: 0028-0836

hal-01685757
https://hal.archives-ouvertes.fr/hal-01685757
DOI : 10.1038/nature22355

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
We use digital elevation models and satellite imagery data completed with field observations to develop an integrated morphotectonic analysis of the anomalous topography of the Central Cordillera of Patagonia between 46 degrees S and 48 degrees S, in a region overlying subducted segments of the Chile Spreading Ridge. This region shows a number of peculiar features, not expected in a normal subduction-related belt located away from a buried spreading center. First, it is characterized by overall short-wavelength topography and highly contrasted reliefs, typical of deeply incised young mountain belts, but surprisingly, also by an average very low elevation of similar to 900 m. Second, the Cordillera lacks central high reliefs; instead, there is a central, depressed domain with average low slope gradients including the deepest point of the study area (300 m below sea level in the bottom of Lake General Carrera/Buenos Aires). This depressed area is flanked by western and eastern regions of higher elevation having opposite general slope dips. To the east, the central Patagonian Cordillera is now separated from the flat plains of the Pampean domain (representing its former piedmont) and several elevated basaltic plateaus (mesetas) by 160 degrees N-180 degrees N trending morphotectonic corridors and the western border scarps of the mesetas. These scarps correspond to neotectonic features controlled by recent vertical faults, mostly active after 3 Ma. Remnants of a former peneplain, the Avellanos surface, are widespread within the entire Cordilleran region. From geological evidence, this peneplain formed between 15 and 4 Ma and was connected originally with the mesetas domain and now is dissected by these corridors. It is shown that a negative inversion related to extensional and strike-slip faulting occurred in the frontal region of the Cordillera at 3 Ma synchronously with the emplacement of magmatic products. Timing of the extensional deformation in central Patagonia is concomitant with the migration at depth of different segments of the South Chile Ridge, which entered the trench at 6 and 3 Ma, respectively, and the consequent opening of a slab window allows asthenospheric hot mantle to reach lithospheric regions. Finally, migration of segments of the Chile Spreading Ridge since 6 Ma triggered regional uplift of the Cordillera followed by limited extension in relation with increased thermal weakening of the crust.
ISSN: 0278-7407

hal-00486334
https://hal.archives-ouvertes.fr/hal-00486334
DOI : 10.1029/2009TC002453