Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] Zircons and monazites from 6 samples of the North Ayilari dextral shear zone (NAsz), part of the Karakorum fault zone (KFZ), have been dated with the U-Th-Pb method, using both ID-TIMS and SIMS techniques. The ages reveal (1) inheritance from several events spanning a long period between the late Archean and the Jurassic; (2) an Eocene-Oligocene magmatic event (similar to 35-32 Ma); (3) an Oligo-Miocene magmatic event (similar to 25-22 Ma), at least partly synkinematic to the right-lateral deformation; and (4) a period of metamorphism metasomatism (similar to 22-14 Ma) interpreted as thermal and fluid advection in the shear zone. The Labhar Kangri granite located similar to 375 km farther Southeast along the KFZ is dated at 21.1 +/- 0.3 Ma. Such occurrence of several Oligo-Miocene granites along the KFZ, some of which show evidence for synkinematic emplacement, suggests that the fault zone played an important role in the genesis and /or collection of crustal melts. We discuss several scenarios for the onset and propagation of the KFZ, and offset estimates based on the main sutures zones. Our preferred scenario is an Oligo-Miocene initiation of the fault close to the NA range, and propagation along most of its length prior to similar to 19 Ma. In its southern half, the averaged long-term fault-rate of the KFZ is greater than 8 to 10 mm/a, in good agreement with some shorter-term estimates based on the Indus river course, or Quaternary moraines and geodesy. Our results show the KFZ cannot be considered as a small transient fault but played a major role in the collision history.
ISSN: 0278-7407

hal-00412570
https://hal.archives-ouvertes.fr/hal-00412570
DOI : 10.1029/2007TC002184

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : Pervasive melting of the middle crust, as inferred in Tibet and the Altiplano, probably influences the deformation of the lithosphere. To constrain strain distribution in a pervasively molten crust, we analysed the deformation in an eroded analogue of these orogens. The Ribeira-Araçuaí orogen (SE Brazil) comprises a stack of allochthons containing large volumes of anatectic and magmatic rocks. The upper allochton (∼300 km long, 50–100 km wide and >10 km thick) involves peraluminous diatexites and leucogranites resulting from partial melting of the middle crust. It overlies another allochthon containing huge early- to syn-collisional plutons intruding metasediments. Both anatexites and magmatic intrusions display a pervasive strain-induced magmatic fabric. Homogeneous strain distribution suggests inefficient localization. U–Pb ages of ∼575 Ma imply that anatexite melting was synchronous to the early- to syn-collisional magmatism. Similarity in ages magmatic and solid-state fabrics indicates that intrusions and anatexites deformed coherently with solid-state rocks while still molten, in response to a combination of gravity-driven and collision-driven deformation.
ISSN: 0954-4879

hal-00404915
https://hal.archives-ouvertes.fr/hal-00404915
DOI : 10.1111/j.1365-3121.2007.00747.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We investigate the timing of end of motion along the South Tibet Detachment System (STDS), a major normal fault system that runs parallel to the Himalayan range for more than 1500 km. Near Dinggye (similar to 28 degrees 10'N, 87 degrees 40'E), the STD dips similar to 10 +/- 5 degrees to the North and separates Paleozoic Tethyan series from Upper Himalayan Crystalline Series (UHCS). Immediately below the STD, the UHCS is highly deformed in the STD shear zone, lineations trend NNE and the shear senses are top to the NE. In micaschist, the P-T path constrained by pseudosection and garnet chemistry, shows successive metamorphic conditions of similar to 0.6 GPa and similar to 550 degrees C and 0.5 GPa and 625 degrees C. U/Pb dating of monazites and zircons in deformed and undeformed leucogranites suggests that ductile deformation lasted until at least similar to 16 Ma but ended prior to similar to 15 Ma in the STD shear zone similar to 100 m below the detachment. Ar/Ar micas ages in the footwall span between similar to 14.6 and 13.6 Ma, indicating rapid cooling down to similar to 320 degrees C, and suggesting persistence of normal faulting, at that time. The STDS is cut and offset by the N-S trending Dinggye active normal fault which initiated prior to 11 Ma thus providing a minimum bound for the end of STDS motion. These data are interpreted as reflecting 0.3 GPa (11 km) to 0.6 GPa (22 km) of exhumation along the STDS starting prior to similar to 16 Ma, ending between 13.6 and 11 Ma. The 1000 km long stretch of the STDS east of the Gurla Mandata probably stopped almost synchronously between 13 and 11 Ma ago, coevally with a sudden switch from NNE-SSW to E-W extension at the top of the accretionary prism, with a jump of the major thrust from the lower Main Central Thrust (MCTI) to the Main Boundary Thrust (MBT), and with a change in the India and Asia convergence direction. This synchronism is probably better explained in the frame of a thrust wedge or thrust system model than a lower channel flow model. West of the Gurla Mandata the STDS appears to stop 5 to 3 Ma earlier, possibly related to local interactions with the Karakorum fault in a way that needs to be understood.
ISSN: 0012-821X

hal-00475652
https://hal.archives-ouvertes.fr/hal-00475652
DOI : 10.1016/j.epsl.2009.12.035

Éditeur(s) : HAL CCSD
Résumé : The Karakorum Fault zone (KFZ), lying in the west of the Tibetan plateau, is an important dextral strike-slip fault and the important northern geological boundary of the west Himalaya. In the AyilaRi' gyu Range-Gai Basin area lying in the southeast of the KFZ, Ar-40/Ar-39 thermochronologic analysis was performed on the syn-tectonic minerals in the, metamorphic rocks in the Karakorum ductile shear zone, with the base of petrology and deformation structure researches. According to the microstructure features, the minerals in the shear zone recorded the continuous deformation from high ( > 600 degrees C) to low temperature ( < 250 degrees C) appeared as that the nearly horizontal dextral shearing has transformed into the oblique dextral normal slip, made the greenschist facies of deformation stack oil the early medium-high temperature deformation, indicated the uplift during the slip. The thermochronologic revealed the continuous shear process from the early Miocene to 4Ma at least, which containing three rapid cooling stage: from 25 similar to 22Ma to 21 similar to 18Ma, the deformation locally stopped or slower in the, shallow high temperature shear process; from 15Ma to 12Ma, the rapid uplift of the AyilaRi' gyu Range, the initial formation of the Gar Basin together with the main deep incision of river during the strip-slip of the KFZ; since 9Ma, the AyilaRi' gyu Range has increased the rapid uplift and the Gar Basin has formed finally. According to the different levels of deformation and the dextral displacement of the surface landform with different ages, the long term slip rate and the uplift rate indicated the intense dextral strike slip and uplift associated since the late Quarternary Period.
Acta Petrologica Sinica

hal-00411572
https://hal.archives-ouvertes.fr/hal-00411572

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Field study, thermochronology and geochemistry of the east Lungmu Co (LMC) range highlight some of the geological events that shaped western Tibet. The LMC fault zone has long been interpreted as the boundary between the Tianshuihai terrane of Laurasian affinity and the Qiangtang block of Gondwanian affinity. In the LMC range, the Paleozoic series is intruded by the Mangtsa leucogranite whose zircon have a U/Pb age of 116.9 ± 1 Ma and by mafic rocks with U/Pb zircon ages ranging from 116.9 ± 1 to 95.1 ± 1.7 Ma. Geochemistry of the mafic rocks indicates that they have been emplaced in a supra-subduction zone setting, probably the north dipping Nujiang suture zone. 40Ar/39Ar micas ages of the granite indicate that cooling below ~ 350 °C occurred between 105 and 85 Ma. 40Ar/39Ar K-feldspar data suggest a fast cooling event at 60-55 Ma, which we relate to the reactivation of the LMC suture zone as a thrust at the onset of the India-Eurasia collision. The last, and still active, deformation event corresponds to left-lateral strike-slip faulting along the ENE-WSW LMC fault.
ISSN: 1342-937X

hal-00660491
https://hal.archives-ouvertes.fr/hal-00660491
DOI : 10.1016/j.gr.2011.07.026

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
How reliable are shear wave splitting measurements as a means of determining mantle flow direction? This remains a topic of debate, especially in the context of subduction. The answer hinges on whether our current understanding of mineral physics provides enough to accurately translate between seismic observations and mantle deformation. Here, we present an integrated model to simulate strain-history-dependent texture development and estimate resulting shear wave splitting in subduction environments. We do this for a mantle flow model that, in its geometry, approximates the double-sided Molucca Sea subduction system in Eastern Indonesia. We test a single-sided and a double-sided subduction case. Results are compared to recent splitting measurements of this region by Di Leo et al. (2012a). The setting lends itself as a case study, because it is fairly young and, therefore, early textures from the slab's descent from the near surface to the bottom of the mantle transition zone--which we simulate in our models--have not yet been overprinted by subsequent continuous steady state flow. Second, it allows us to test the significance of the double-sided geometry, i.e., the need for a rear barrier to achieve trench-parallel subslab mantle flow. We demonstrate that although a barrier amplifies trench-parallel subslab anisotropy due to mantle flow, it is not necessary to produce trench-parallel fast directions per se. In a simple model of A-type olivine lattice-preferred orientation and one-sided subduction, trench-parallel fast directions are produced by a combination of simple shear and extension through compression and pure shear in the subslab mantle.
ISSN: 1525-2027

hal-01053506
https://hal.archives-ouvertes.fr/hal-01053506
DOI : 10.1002/2013GC005032