Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Background information. Marine nematodes belonging to the Stilbonematidae (Desmodoridae) family are described as living in obligatory association with sulfur-oxidizing chemoautotrophic ectosymbionts. The symbiotic bacteria carrying out this chemosynthesis should contain elemental sulfur in periplasmic granules as sulfur granules of chemoautotrophic endosymbionts described in various marine invertebrates. Results. Based on TEM analyses, extracellular bacteria surrounding Eubostrichus dianae possess these spherical periplasmic granules. Few investigative techniques can be used to identify elemental sulfur S8 such as EDXS (energy dispersive X-ray spectroscopy) and EELS (electron energy loss spectroscopy) associated with cryo-fixation of the sample to avoid sulfur loss. These techniques are time consuming, expensive and require technical skills. Raman microspectrometry applied to the analysis of E. dianae allowed us to detect elemental sulfur S8 and confirmed the location of these sulfur clusters in the bacterial coat. In the same way, Raman spectrometry was positively applied to the endosymbiotic bivalve Codakia orbicularis, suggesting that this technique can be used to characterize sulfur in ecto- as well as in endo-symbiotic sulfur-oxidizing bacteria. Conclusions. As Raman spectrometry can be used on living organisms (without preliminary fixation) without sample damage and preserving the molecular structure of the sulfur (denatured during chemical fixation) it represents a very well-adapted investigative tool for biologists. This technique therefore permits us to detect quickly and easily (in a few seconds and on entire living animals) the presence of sulfur compounds in the symbiotic nematode.
ISSN: 0248-4900

hal-00753017
https://hal.univ-antilles.fr/hal-00753017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Oisans Massif, located in the external zones of the western Alps, experienced significant shortening during the Alpine collision. While a series of major top-to-the west shear zones was recently described, the general low grade of the metamorphism has not attracted much petrological and geochronological studies. This paper provides combined temperature and age constraints on the evolution of the Oisans Massif. Temperature was estimated with the Raman Spectrometry of Carbonaceous Material (RSCM) method and chlorite geothermometry. Maximum temperature reached by the Mesozoic cover (Tmax) from Grenoble to the Galibier pass (E-W) and from Saint Jean de Maurienne to Embrun (N-S) yielded almost constant ca. 330 °C temperatures all through the Massif. Temperatures however strongly decrease either westward towards the top of the Vercors sedimentary sequence or eastward towards the Penninic Frontal Thrust. Age constraints were retrieved using 40Ar/39Ar in situ analyses performed on variously strained samples from Alpine shear zones. Over strain gradients, incipient Alpine recrystallizations progressively develop at the expense of former Variscan parageneses. A combined textural and EPMA approach permitted to identify newly formed chlorite and phengite that unequivocally grew in response to deformation or to low grade metamorphism. Chlorites recorded temperatures from ca. 350–150 °C during the activity of shear zones. In parallel, 40Ar/39Ar in situ experiments enabled dating deformation using both synkinematic phengites crystallized below the closure temperature of white-micas and former Variscan muscovite whose isotopic system have been, at least partially re-opened. Activity of top-to-the-west shear zones responsible for the shortening and thickening of the Oisans massif thus occurred between 34 and 33 and 25 Ma. Integrating these new age-constraints, Tmax estimates, and published geological data on the Oisans Massif and neighbouring areas allow proposing a new shortening scenario for the external zones. From ca. 34–33 Ma, the Oisans Massif was buried as a rigid block below more internal units and reached a temperature of ca. 330 °C. Shearing progressively localized along a series of top-to-the-W shear zones in the basement until 25 Ma. Deformation then localized along a major thrust at the base of the ECM massif and propagated along the basement-cover interface below the Vercors massif after 16 Ma.
ISSN: 0264-3707

Droits : info:eu-repo/semantics/OpenAccess
insu-01093878
https://hal-insu.archives-ouvertes.fr/insu-01093878
https://hal-insu.archives-ouvertes.fr/insu-01093878/document
https://hal-insu.archives-ouvertes.fr/insu-01093878/file/GEOD1326RA.pdf
DOI : 10.1016/j.jog.2014.09.004

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
A comparative study of 9H-pyrido[3,4-b]indole (norharmane) and 1-methyl-9H-pyrido[3,4-b]indole (harmane) as inhibitors for C38 steel corrosion in 1 M HCl solution at 25 °C was carried out. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques were applied to study the metal corrosion behavior in the absence and presence of different concentrations of these inhibitors. The OCP as a function of time were also established. Cathodic and anodic polarization curves show that norharmane and harmane are a mixed-type inhibitors. Adsorption of indole derivatives on the C38 steel surface, in 1 M HCl solution, follows the Langmuir adsorption isotherm model. The ΔGads values were calculated and discussed. The potential of zero charge (PZC) of the C38 steel in inhibited solution was studied by the EIS method, and a mechanism for the adsorption process was proposed. Raman spectroscopy confirmed that indole molecules strongly adsorbed onto the steel surface. The electronic properties of indole derivates, obtained using the AM1 semi-empirical quantum chemical approach, were correlated with their experimental efficiencies using the linear resistance model (LR).
ISSN: 0018-3830

hal-01093227
https://hal-agroparistech.archives-ouvertes.fr/hal-01093227
DOI : 10.1515/HF.2010.034

Éditeur(s) : HAL CCSD
Résumé : soutenue le 09 juin 2008
Intrinsic tribological properties of lamellar compounds are usually attributed to the presence of van der Waals gap in their structure. The controled variation of the graphite's crystal and electronic structure by intercalation processes of different species (electrophile, nucleophile ...) give a possibility to study in a more deeply way the friction reduction processes for low dimensional compounds. Three groups of intercalant are studied and tribological properties are correlated to structural and chemical evolutions.
Les propriétés tribologiques intrinsèques des composés lamellaires sont généralement attribuées à la présence de gap de van der Waals dans leur structure. La possibilité de faire varier de manière contrôlée la structure cristalline et la structure électronique du graphite par processus d'intercalation de différentes espèces chimiques (électrophile, nucléophile ...) sont utilisées pour étudier de façon plus approfondie les processus de réduction du frottement par les composés de basse dimensionnalité. Trois familles d'intercalants sont étudiées et les propriétés tribologiques sont corrélées aux évolutions structurales et chimiques.
https://tel.archives-ouvertes.fr/tel-00431713

Droits : info:eu-repo/semantics/OpenAccess
tel-00431713
https://tel.archives-ouvertes.fr/tel-00431713
https://tel.archives-ouvertes.fr/tel-00431713/document
https://tel.archives-ouvertes.fr/tel-00431713/file/These-DELBE_Karl.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The structural parameters of fluorinated nanocarbons presenting different shapes, i.e. spherical, tubular and discotic are investigated and correlated to their tribological properties. Different fluorination rates of graphitized carbon blacks (0D), carbon nanofibres (1D) and a mixture of carbon nanodiscs and nanocones (2D) were achieved under pure molecular fluorine gas flow (direct fluorination). Raman spectrometry, X-ray diffraction and 19F solid state nuclear magnetic resonance underline similar structure and nature of the C-F bonds (covalent) for equivalent fluorine contents. In spite of the similarities of physical-chemical properties at equivalent fluorine contents, the tribological properties of the fluorinated nanocarbons differ. Those properties are discussed taking into account the role of the fluorine content and location of the fluorine atoms in the decrease of the interparticle interactions and in the cleavage of the external fluorocarbon layers to form the tribofilm. Finally, the effect of the shape is discussed.
ISSN: 0022-1139

hal-00787267
https://hal.archives-ouvertes.fr/hal-00787267

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] The Pyrenees, north of the North Pyrenean fault, display a complex structure involving a succession of peridotite massifs, basement massifs, and mid-Cretaceous to Late Cretaceous basins located in a narrow domain, which was affected by a mid-Cretaceous, preorogenic, high-temperature, low-pressure metamorphism. The Late Cretaceous basins were interpreted either as pull-apart basins formed during transcurrent motion of Iberia relative to Eurasia or as remnants of a larger extensional basin. Recent models support that peridotite massifs result from the exhumation of the mantle during this preorogenic event. The northern boundary of the Agly basement massif shows evidence of ductile deformation of the basal formations of the Agly sedimentary cover. Macroscopic and microscopic kinematics indicators consistent with asymmetry of crystallographic fabrics suggest normal sense of shear and thus suggest detachment, at least partial, of the Mesozoic cover from its basement. Triassic to Early Cretaceous limestones are mylonitic and consistently shows a foliation, a NS- to NE-trending lineation, shear criteria suggesting top-to-the-north shearing and locally boudinage. At the microscopic scale, mylonites are characterized by a very fine grain size, frequently <10 µm. They contain larger, partially recrystallized calcite parent grains and undeformed quartz grains with calcite fringes crystallized in pressure shadows. In these mylonites, calcite systematically shows a weak but well-defined crystallographic-preferred orientations, suggesting HT dislocation creep combined to diffusion creep and possibly grain boundary sliding in the finest fraction of the mylonites. Paleotemperatures determined using Raman spectrometry suggest synkinematic temperature conditions in the range 340-390°C, in good agreement with observed microstructures and calcite CPO. The mylonitic fabric in Mesozoic limestones is folded by EW-trending Pyrenean folds north of the Agly basement massif, attesting that this fabric formed before the Pyrenean orogeny. These data consistently support preorogenic extension under medium-temperature conditions of the northern Agly massif and likely of the massif itself. Since simultaneously (~100 Ma) a mid-Cretaceous basin opened south of the basement massif, we suggest a model of preorogenic exhumation of the Agly massif in response to the regional extension associated to the rotation of Iberia. This model may explain the exhumation of the North Pyrenean massifs during a single preorogenic event that allowed the opening of extensional basins and the exhumation of the lithospheric mantle. All these structures being subsequently reworked during the Pyrenean orogeny.
ISSN: 0278-7407

hal-00852833
https://hal.archives-ouvertes.fr/hal-00852833
DOI : 10.1002/tect.20015