Éditeur(s) : HAL CCSD Walter de Gruyter
Résumé :  
A method for measuring shrinkage resulting from drying in the three anisotropic directions is developed and tested. Measurements are performed on sawn discs, a technique which simplifies preparation and enables large numbers of measurements. Shrinkage values can be represented as a map of the disc surface. The results indicate that comparisons between shrinkage distribution and tension wood distribution on the discs show a clear relationship and can be measured with relatively high accuracy in reference to the "shrinkage map". In the long term, this method could be useful in the timber industry as a means for choosing the direction in which logs are cut depending on their type of wood composition.
Holzforschung

hal-01032055
https://hal.archives-ouvertes.fr/hal-01032055
DOI : 10.1515/HF.2003.100

Éditeur(s) : HAL CCSD De Gruyter Mouton
Résumé : International audience
Manuel des francophonies

ISBN : 978-3-11-034821-7
hal-01625894
https://hal.univ-antilles.fr/hal-01625894
DOI : 10.1515/9783110348217-028

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
Coral reefs have undergone profound ecological changes over recent decades. Areas formerly covered by scleractinian coral species are now often overgrown by macroalgae. In Martinique (West Indies), this phenomenon has lead to the colonisation of numerous coral reefs by algae, amongst which Sargassum is one of the most prominent. This study focuses on potential defence molecules produced by Sargassum polyceratium. The hexane dipping method was employed to extract surface molecules on fresh material, and their bioactivities were assessed against bacteria (marine and estuarine), and marine tropical invertebrates wan annelid (Pseudonereis sp.), a bivalve (Codakia orbicularis) and a sea urchin (Diadema antillarum)x. Extracts were active against all microorganisms tested (MICs150 or 300 mg ml-1), early stages of development in Pseudonereis sp. (MICs100 mg ml-1) and embryos of C. orbicularis and D. antillarum (MICs5 mg ml-1), suggesting the production of defence compounds by S. polyceratium.
ISSN: 0006-8055

hal-00746082
https://hal.univ-antilles.fr/hal-00746082
https://hal.univ-antilles.fr/hal-00746082/document
https://hal.univ-antilles.fr/hal-00746082/file/Publication_Sargassum_bortanica_marina.pdf
DOI : 10.1515/BOT.2011.014

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
This study aims at better understanding the respective influences of specific gravity (γ), microfibril angle (MFA), and cell-wall matrix polymers on viscoelastic vibrational properties of wood in axial direction. The wide variations of properties between normal wood (NW) and compression wood (CW) are in focus. Three young bent trees (Picea abies, Pinus sylvestris and Pinus pinaster) that recovered verticality were sampled. Several observed differences between NW and CW were highly significant in terms of anatomical, physical (γ, shrinkage, CIELab colorimetry), mechanical (compressive strength), and vibrational properties. Specific dynamic modulus of elasticity (E'/γ) decreases with increasing MFA, and Young's modulus (E') can be satisfactorily explained by γ and MFA. Apparently, the type of the cell wall polymer matrix is not influential in this regard. The damping coefficient (tanδ) does not depend solely on MFA of NW and CW. The tanδ - E'/γ relationship evidences that, at equivalent E'/γ, the tanδ of CW is approx. 34% lower than that of NW. This observation is ascribed to the more condensed nature of CW lignins, and this is discussed in the context of previous findings in other hygrothermal and time/frequency domains. It is proposed that the lignin structure and the amount and type of extractives, which are both different in various species, are partly responsible for taxonomy-related damping characteristics.
ISSN: 0018-3830

hal-00808062
https://hal.archives-ouvertes.fr/hal-00808062
https://hal.archives-ouvertes.fr/hal-00808062/document
https://hal.archives-ouvertes.fr/hal-00808062/file/Changes_viscoelastic_vibrational_Bremaud_al.pdf
DOI : 10.1515/hf-2011-0186

Éditeur(s) : Walter De Gruyter & Co
Résumé : The section of the Liguro-Provencal basin north of the Balearic Islands is one of the most productive sites in the whole Mediterranean Sea, with intense phytoplankton bloom lasting about 2 months in late winter-early spring. The phytoplankton species composition of the area was investigated using light and electron microscopy to analyze bottle and net samples collected at several stations in spring 2000 and 2003. Serial dilution cultures established from bottle samples were also examined. A total of 168 phytoplankton taxa was identified, consisting of 73 Coscinodiscophyceae, 47 Dinophyceae, 25 Coccolithophyceae and 4 Prymnesiophyceae, 5 Prasinophyceae, 3 Chrysophyceae, 2 Cryptophyceae, 2 Dictyochophyceae, 1 Euglenophyceae, 1 Pelagophyceae, 1 Choanoflagellidea, 1 Filosea and 3 incertae sedis. We also provided a brief taxonomic description and original micrographs for 25 of the smallest and/or less known species identified in the study area, which may go undetected during routine microscopical analysis of fixed samples. Among these, 10 species were recorded for the first time in the Mediterranean Sea, confirming the need of detailed studies to reveal the biodiversity and biogeography of Mediterranean phytoplankton.
Botanica Marina (0006-8055) (Walter De Gruyter & Co), 2011-06 , Vol. 54 , N. 3 , P. 243-267

Droits : 2011 by Walter de Gruyter
http://archimer.ifremer.fr/doc/00038/14916/12245.pdf
DOI:10.1515/BOT.2011.033
http://archimer.ifremer.fr/doc/00038/14916/

Éditeur(s) : HAL CCSD De Gruyter
Résumé :  
Experimental results are presented with single nail joints of gonfolo rose which were loaded at different grain angles and compared to results obtained by Eurocode V. A wide range of embedding strength tests was conducted. The embedding behaviour across the grain was also investigated with a specific test apparatus. The results were analysed and modelled in terms of strength. Initial loading and unloading stiffness of the timber have been taken into account. The embedment strength of the nails varied according to the angle between the direction of loading and that to the grain. This work is part of a larger research project to establish a computer program for the prediction of stiffness and limit strengths of all timber-to-timber and timber-to-steel joints.
ISSN: 0018-3830

hal-01032183
https://hal.archives-ouvertes.fr/hal-01032183
DOI : 10.1515/HF.2008.013

Éditeur(s) : HAL CCSD Walter de Gruyter
Résumé : absent
Holzforschung

hal-01031939
https://hal.archives-ouvertes.fr/hal-01031939
DOI : 10.1515/HF.2005.057

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
Wallaba (Eperua falcata) is a tropical wood which is known to have naturally low swelling characteristics. Samples of wallaba heartwood were subjected to differential solvent extraction. Wood pieces that were extracted with methanol experienced significantly higher swelling after rehydration from oven dry to 96% relative humidity in comparison to non-extracted samples and samples extracted with other solvents. Methanol soluble wallaba heartwood extract was purified by high pressure liquid chromatography and the compounds present were characterised by nuclear magnetic resonance spectroscopy. Methanol extract was found to contain a very high relative proportion of polar compounds which are proposed to bind to the polymeric cell wall by multiple hydrogen bonds restricting the association of water and therefore acting as natural anti-swelling agents.
ISSN: 0018-3830

hal-00856942
https://hal.archives-ouvertes.fr/hal-00856942
https://hal.archives-ouvertes.fr/hal-00856942/document
https://hal.archives-ouvertes.fr/hal-00856942/file/Chemical_extractives_tropical_wood_Royer_al.pdf

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
This article examines the case of Kali'na, a minority Indigenous language of French Guiana, from the point of view of descriptive categories available in the literature (namely dominated language, minoritized language, endangered language). These terms are discussed, favouring more dynamic categories which focus on processes (minoritization/deminoritization). The article uses both micro- and macrosociolinguistic levels of analysis. At the macro level, indicators are proposed to gauge the minorization of Kali'na as it occurs on the scale of Guiana as a whole, by observing attitudes towards Kali'na language and culture, particularly as expressed in the media and in epilinguistic comments made by speakers. At the local level, we explore the effects of the recognition by the State of a Kali'na township and their influence on language minoritization in the village and more generally at the level of the linguistic community. We also attempt to determine to what extent, as far as interactions are concerned, alternations and code switching between Kali'na and French might constitute indicators of the process of minoritization or deminoritization or of language death currently underway.
ISSN: 0165-2516

halshs-00292394
https://halshs.archives-ouvertes.fr/halshs-00292394
https://halshs.archives-ouvertes.fr/halshs-00292394/document
https://halshs.archives-ouvertes.fr/halshs-00292394/file/2006-leglise-alby-minorization.pdf

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
A comparative study of 9H-pyrido[3,4-b]indole (norharmane) and 1-methyl-9H-pyrido[3,4-b]indole (harmane) as inhibitors for C38 steel corrosion in 1 M HCl solution at 25 °C was carried out. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques were applied to study the metal corrosion behavior in the absence and presence of different concentrations of these inhibitors. The OCP as a function of time were also established. Cathodic and anodic polarization curves show that norharmane and harmane are a mixed-type inhibitors. Adsorption of indole derivatives on the C38 steel surface, in 1 M HCl solution, follows the Langmuir adsorption isotherm model. The ΔGads values were calculated and discussed. The potential of zero charge (PZC) of the C38 steel in inhibited solution was studied by the EIS method, and a mechanism for the adsorption process was proposed. Raman spectroscopy confirmed that indole molecules strongly adsorbed onto the steel surface. The electronic properties of indole derivates, obtained using the AM1 semi-empirical quantum chemical approach, were correlated with their experimental efficiencies using the linear resistance model (LR).
ISSN: 0018-3830

hal-01093227
https://hal-agroparistech.archives-ouvertes.fr/hal-01093227
DOI : 10.1515/HF.2010.034

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
The data available in the literature concerning wood cutting forces permit to build models or to simulate the main wood machining processes (milling, sawing, peeling etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimize cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: (1) providing data to optimise the settings for a given operation (batch approach) and (2) building predictive models that could be the basis of an online control systems for the machining processes (interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With potential industrial applications in focus, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Though not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technologic knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003/document
https://hal.archives-ouvertes.fr/hal-00876003/file/LABOMAP_Holzforschung_2009_denaud.pdf
ENSAM : http://hdl.handle.net/10985/7419

Éditeur(s) : HAL CCSD De Gruyter
Résumé : COST Action E35 : Fracture mechanics and micromechanics of wood and wood composites with regard to wood machining
The data available in the literature concerning wood cutting forces permits to build models or to simulate the main wood machining processes ( milling, sawing, peeling, etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimise cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: ( 1) providing data to optimise the settings for a given operation ( batch approach), and ( 2) building predictive models that could be the basis of an online control system for the machining processes ( interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With a focus on potential industrial applications, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Although not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technological knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-01032121
https://hal.archives-ouvertes.fr/hal-01032121
DOI : 10.1515/HF.2009.014

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
This article examines the case of Kali'na, a minority Indigenous language of French Guiana, from the point of view of descriptive categories available in the literature (namely dominated language, minoritized language, endangered language). These terms are discussed, favouring more dynamic categories which focus on processes (minoritization/deminoritization). The article uses both micro- and macrosociolinguistic levels of analysis. At the macro level, indicators are proposed to gauge the minorization of Kali'na as it occurs on the scale of Guiana as a whole, by observing attitudes towards Kali'na language and culture, particularly as expressed in the media and in epilinguistic comments made by speakers. At the local level, we explore the effects of the recognition by the State of a Kali'na township and their influence on language minoritization in the village and more generally at the level of the linguistic community. We also attempt to determine to what extent, as far as interactions are concerned, alternations and code switching between Kali'na and French might constitute indicators of the process of minoritization or deminoritization or of language death currently underway.
ISSN: 0165-2516

hal-00239307
https://hal.archives-ouvertes.fr/hal-00239307
https://hal.archives-ouvertes.fr/hal-00239307/document
https://hal.archives-ouvertes.fr/hal-00239307/file/2006-leglise-alby-IJSL.pdf

Éditeur(s) : HAL CCSD De Gruyter
Résumé : A method for measuring shrinkage resulting from drying in the three anisotropic directions is developed and tested. Measurements are performed on sawn discs, a technique which simplifies preparation and enables large numbers of measurements. Shrinkage values can be represented as a map of the disc surface; the results indicate that comparisons between shrinkage distribution and tension wood distribution on the discs show a clear relationship and can be measured with relatively high accuracy in reference to the "shrinkage map". In the long term, this method could be useful in the timber industry as a means for choosing the direction in which logs are cut depending on their type of wood composition.
ISSN: 0018-3830

hal-00004531
https://hal.archives-ouvertes.fr/hal-00004531
https://hal.archives-ouvertes.fr/hal-00004531/document
https://hal.archives-ouvertes.fr/hal-00004531/file/Holzforschung2003_Clair-Jaouen-Beauchene-Fournier_ccsd.pdf