Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Challenging evaluation of tropical forest biodiversity requires the reporting of taxonomic diversity but also the systematic characterization of wood properties in order to discover new promising species for timber industry. Among wood properties, the dimensional stability is regarded as a major technological characteristic to validate whether a wood species is adapted to commercial uses. Cell structure and organization are known to influence the drying shrinkage making wood density and microfibrils angle markers of choice to predict wood dimensional stability. On the contrary the role of wood extractive content remains unclear. This work focuses on the fast-growing tropical species Bagassa guianensis and we report herein a correlation between heartwood drying shrinkage and extractive content. Chemical extractions and shrinkage experiments were performed on separate wood twin samples to better evaluate correctly how secondary metabolites influence the wood shrinkage behaviour. Extractive content were qualitatively and quantitatively analysed using HPLC and NMR spectroscopy. We found that B guianensis heartwood has a homogeneous low shrinkage along its radius that could not be explained only by its basic density. In fact the low drying shrinkage is correlated to the high extractive content and a corrected model to improve the prediction of wood dimensional stability is presented. Additionally NMR experiments conducted on sapwood and heartwood extracts demonstrate that secondary metabolites biosynthesis occurs in sapwood thus revealing B. guianensis as a Juglans-Type heartwood formation. This work demonstrates that B. guianensis, a fast-growing species associated with high durability and high dimensional stability, is a good candidate for lumber production and commercial purposes.
ISSN: 1932-6203

hal-01392725
https://hal.archives-ouvertes.fr/hal-01392725
https://hal.archives-ouvertes.fr/hal-01392725/document
https://hal.archives-ouvertes.fr/hal-01392725/file/2016_BossuBeaucheneEstevezDuplaisClair_PlosOne_WoodDimentionalStabilityAndSecondaryMetabolites.pdf
DOI : 10.1371/journal.pone.0150777.s005

Résumé : The study conducted in the framework of an agreement between Ifremer and the Local fisheries committee at Audierne is part of a project to restore spiny lobster Palinurus elephas stock levels in the Iroise Sea. It is supported by professional fishermen from Finistère and by the Regional fisheries committee of Brittany. After a brief review of the way lobster stocks are managed worldwide, followed by the major biological and ecological features of red lobster and the state of fisheries in Europe and North Africa, the very poor state of the resource along French coast is borne out by the statistics of landings. Various scenarios (not alternatives) to promote the rebuilding of the biomass are suggested: minimum landing size increase, seasonal closure of the fishery, berried females protection, no fishing zones. The drift of phyllosoma larvae during their long larval stage is addressed using a 3-D hydrodynamic simulation model.
L'étude réalisée dans le cadre d'une convention entre Ifremer et le Comité local des Pêches d'Audierne s'inscrit dans un projet de reconquête des niveaux de ressource en langouste rouge Palinurus elephas en mer d'Iroise soutenu par les pêcheurs professionnels de la pointe du Finistère et par le Comité régional des Pêches de Bretagne. Après avoir rappelé brièvement les modalités de gestion des stocks de langoustes dans le monde puis les grands traits biologiques et écologiques de la langouste rouge et l'état des pêcheries en Europe et dans le nord de l'Afrique, le très mauvais état de cette ressource sur les côtes françaises est confirmé au travers des statistiques de débarquement. Divers scénarios (non alternatifs) visant à favoriser la reconstitution d'une biomasse sont proposés : augmentation de la taille minimale au débarquement, fermeture saisonnière de la pêche, protection des femelles ovigères et création de zones protégées. La dérive des larves phyllosomes au cours de leur longue phase larvaire est abordée par un modèle de simulation hydrodynamique en trois dimensions.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2005/rapport-1198.pdf
http://archimer.ifremer.fr/doc/00000/1198/

Éditeur(s) : [s.n.]
Résumé : Plan and three dimensional drawing of Portus Pulchri, showing the town of Porto-Bello during Vice Admiral Edward Vernon's attack.
(Funding) Funded in part by the University of Florida, the Florida Heritage Project of the State University Libraries of Florida, the Institute for Museum and Library Services, and the U.S. Department of Education's TICFIA granting program.
Panama -- Colon -- Portobelo

Droits : This item is presumed to be in the public domain. The University of Florida George A. Smathers Libraries respect the intellectual property rights of others and do not claim any copyright interest in this item. Users of this work have responsibility for determining copyright status prior to reusing, publishing or reproducing this item for purposes other than what is allowed by fair use or other copyright exemptions. Any reuse of this item in excess of fair use or other copyright exemptions may require permission of the copyright holder. The Smathers Libraries would like to learn more about this item and invite individuals or organizations to contact Digital Services (UFDC@uflib.ufl.edu) with any additional information they can provide.
002356826
ALW1254
http://ufdc.ufl.edu/UF00072326/00001

Résumé : La recevabilité est le cœur de la procédure judiciaire. Elle permet d’étudier la pénalisation de la vie internationale. Elle semble pouvoir rendre compte de la réponse judiciaire à la rancœur internationale au regard des grands faits criminels ; quel qu’en fut le territoire de commission.Cette thèse porte sur la notion de recevabilité devant la Cour pénale internationale. Avec la création de la CPI, la justice pénale internationale prend une dimension nouvelle. La pratique de la Cour est encore récente. L’étude est le prétexte pour examiner le fonctionnement de la Cour pénale internationale. Les Etats ont tenté de limiter la capacité de recevoir de la Cour. Ils l’ont ainsi fondée sur le principe de la complémentarité. Elle supplée l’inaction ou l’action défaillante des Etats, qui ont le devoir de poursuivre les auteurs de crimes internationaux. L’article 17 du Statut de Rome énonce les exceptions permettant de déclarer une affaire recevable devant la CPI. Ainsi, la recevabilité d’une affaire ayant fait l’objet d’une enquête ne sera retenue que s’il est prouvé que les Etats n’ont pas l’intention de mener véritablement à bien les poursuites. Et, que par ailleurs, le seuil de gravité de l’affaire est atteint. Le caractère universel de la compétence de la CPI est battu en brèche par les conditions de recevabilité. On analyse la recevabilité comme une condition de compétence à juste titre, car c’est bien le manquement de l’Etat à assurer l’effectivité des poursuites qui justifie que l’affaire soit déclarée, par la Cour elle-même, recevable. Les conditions requises pour que la Cour puisse agir, force est de constater l’implication du système de recevabilité tant sur l’organisation de la Cour que sur ses rapports avec les Etats. Celles-ci ne sont pas négligeables. De fait, le système de recevabilité est amené à évoluer. Il se caractérise par sa capacité à influencer le droit interne. Ainsi, la décision de recevoir doit amener les Etats à adapter leur droit interne. La viabilité de la Cour, à long terme, dépend du maintien d’une synergie de coopération avec les juridictions nationales, des États parties et d'autres Etats. Le système de recevabilité tend à mettre en évidence des indicateurs émergents dans la pratique de la Cour pénale internationale. C’est notamment le réalignement frappant des rôles des acteurs internationaux et la relation nouvelle qui s’instaure entre les Etats et la Cour. Le système de recevabilité de la Cour tend à éroder le principe de la souveraineté de l'Etat, sans être elle-même balayée par l'opposition catégorique des Etats souverains.
Admissibility is the heart of the judicial process. It studies the criminalization of international life. It seems to account for the judicial response to the international resentment against the great criminal acts, whatever was the territory of commission.This thesis deals with the notion of admissibility before the ICC. With the creation of the ICC, International Criminal Justice is a new dimension. The practice of the Court is still new. The study is an excuse to investigate the operation of the ICC. States have tried to limit the ability to receive from the Court. They did so based on the principle of complementarity. It compensates the action or inaction of failing states, which have a duty to prosecute international crimes. Article 17 RS sets out exceptions to declare a case admissible before the ICC. Thus, the admissibility of a case which is the subject of an investigation will be accepted only, if it is shown that States did not intend genuinely to carry out prosecutions. And that furthermore, the threshold of gravity of a case is reached. The universal nature of the jurisdiction of the ICC is undermined by the conditions of admissibility. Analyzing the admissibility of competence as a condition rightly, for it is the failure of the state to ensure effective prosecution to justify that the case will be declared by the Court itself, admissible. The requirements for the Court to act, it is clear involvement of the system of admissibility as on the organization of the Court that its relationship with the United States. These are not insignificant. In fact, the system will evolve admissibility. It is characterized by its ability to influence the law. Thus, the decision to receive should encourage States to adapt their domestic law. The viability of the Court, in the long run depends on maintaining a synergy of cooperation with national courts of States Parties and other States. The system of admissibility tends to highlight indicators emerging in the practice of the International Criminal Court. This is especially striking realignment of the roles of international actors and the new relationship established between the States and the Court. The system of admissibility of the Court tends to erode the principle of state sovereignty, without itself being swept by the opposition of sovereign states.

http://www.theses.fr/2011AGUY0468

Résumé : 1 - Study's goals review The management of Norway Lobster and Hake fisheries can be considered as the most important issue in the Gascogne gulf. Calculation methods used to evaluate prediction variations under various efforts and mesh constraints all pinpoint to the crucial role narrow mesh fishing plays in Hakes' Northern stock status. The involvement of Gascogne gulf Norway Lobster fisheries regarding Hakes over exploitation seems over dimensioned when comparing the size of both of these stocks. Hake stocks spread from Northern Great Britain to Northern Spain, while Norway Lobster stocks are located in the Gascogne gulf's mud flats. The biological solution is well known and consists in globally increasing mesh nets to 80mm which would bring up Hakes yield to its most. It would be unreal to pretend all parties involved in Hake stocks will come to use them. For now, it is mostly an economical issue since many vessels continue on with an exploitation scheme dating from the 60's and fish on coastal mud flats which are the most exploited zones and where their catch is detrimental to juvenile class Hakes and Norway Lobsters. Considering our limited time, this study will cover bio- economical modelisation preparation. You will therefore find a description of fisheries and an exploitation assessment based on 1986's available data. 2 - Accomplished work 2. 1 Fishery description Presenting the problems and preparing ulterior analyses was first and foremost. Norway Lobster vessels supposedly, according to evaluation models used, test immature Hakes in such a manner that all stock exploitation is jeopardized. Norway Lobster distribution is closely linked to the nature of the ocean floor since it can only build its habitat on fine sediment. Hakes' habitat is not as restrictive and is linked to food supply, especially euphausiid shrimps, so they can be found on sandy and sandy-sedimental floors. Norway Lobsters are sought by a fleet of 400 to 450 ships which characteristics widely vary according to their home port. On the northern part, fisheries are close to exploitation ports where Norway Lobsters and miscellaneous catch yield is sufficient to support an older fleet. On the southern part, the structure is diversified and flexibility usually rules, more modern vessels can easily switch their target on a seasonal or daily basis. Globally, Hakes' northern stocks are slightly on the rise. This rise is probably due to global mesh size increase, even if slight and a decrease on fishing effort where immature species are caught. Norway Lobster stocks unloading is stable or slightly lower and yields, as far as northern fishery are concerned, vary and oscillate between ±15 to ±20 % at about an average of 100 kg/day. Biological parameters used in the evaluations for each species are those used in CIEM and CEE work cells. Among those parameters, those describing growth are the greatest. For Hakes, an intermediary growth equation between males and females has been used. For Norway Lobsters, both sexes are treated separately. Simulations were carried out according to 3 types of data: Norway Lobster vessels fishing effort variations. Norway Lobster vessels mesh increase. Norway Lobster vessels fishing effort decrease or mesh increasing go along in the same direction for Hake and Norway Lobster stock production (chart A and B). Lastly, a brief study on results evaluation significance was done to modify: - the size of Hake rejects by Norway Lobster vessels. The range of sizes stays the same but the amount in each class varies according to the same percentage. - Norway Lobsters growth parameters, both values used (L» = 76 mm and k = 0.11 for males, L°° = 56 mm and k = 0.14 for females) representing the "high" hypothesis. In the first case, a 20% error rate for rejects evaluation with 60 mm mesh would only bring a 3% modification rate on global stock production. Those first results are contradicting usual evaluation conclusions and it will be necessary to recalculate by modifying the size class step. In the second case, to decrease L» and increase growth speed, in time production variations remain within usual inter annual fluctuations. In all figure cases, calculations confirming greater yield for in time production through hypothetical mesh size increase to 60 mm, are definitely well founded.
1 - Rappel des buts de l'étude La gestion des pêcheries de merlu et de langoustine peut être considérée comme le problème le plus important du Golfe de Gascogne. Les méthodes de calcul employées pour évaluer les variations de la production sous diverses contraintes d'effort et de maillage mettent toutes l'accent sur le rôle capital des pêcheries à petits maillages sur l'état du stock nord de merlu. Le niveau de responsabilité des pêcheries de langoustine du Golfe de Gascogne dans la surexploitation du merlu semble démesuré eu égard aux dimensions respectives des deux stocks. Le stock de merlu s'étend du Nord des Iles Britanniques au Nord de l'Espagne alors que le stock de langoustine est localisé aux vasièrés du Golfe de Gascogne. La solution biologique du problème est connue et tient à une augmentation généralisée des maillages à 80 mm qui amènerait le rendement du stock de merlu à son maximum. Il serait illusoire de prétendre que tous les acteurs opérant sur le stock de merlu arriveront jamais à l'utiliser. Pour le moment, le problème se pose essentiellement en termes économiques car beaucoup de navires poursuivent un schéma d'exploitation hérité des années 1960 et pèchent sur des vasièrés côtières qui sont les zones les plus exploitées et où ils effectuent leurs captures au détriment des jeunes classes d'âge de merlu et de langoustine. En raison des délais impartis, cette étude constitue la préparation à une modélisation bioéconomique. On y trouvera donc une description des pêcheries et un bilan de l'exploitation sur les données disponibles en 1986. 2 - Travaux effectués 2 . 1 Description de la pêcherie Il s'agissait avant tout de poser les problèmes et de préparer les analyses ultérieures. Les langoustiniers sont présumés, d'après les modèles d'évaluation employés, effectuer sur les immatures de merlu des prélèvements tels qu'ils mettent en danger toute l'exploitation du stock. La distribution de la langoustine est très liée à la nature du fond car elle ne peut construire son terrier que sur des fonds de vase fine. Celle du merlu est beaucoup plus large et inféodée à la recherche de nourriture, crevettes euphausiacées en particulier, on le trouve donc sur les fonds sableux à sablo-vaseux. La langoustine est recherchée par une flottille de 400 à 450 bateaux dont les caractéristiques sont très variables suivant leur appartenance géographique. Au nord, la pêcherie est proche des ports exploitants et les rendements en langoustine et en prise accessoire sont suffisants pour faire vivre une flottille ancienne. Vers le sud, la structure est très diversifiée et la flexibilité est généralement la règle et les navires de construction récente peuvent changer de cible aisément de façon saisonnière ou au cours de la même journée de pêche. Globalement, les débarquements de merlu du stock nord sont en légère hausse. Ce redressement est dû probablement aux augmentations de maillage, même légères, généralisées et à une baisse de l'effort sur les pêcheries où s'effectuent des captures d'immatures. Les débarquements de langoustine sont stables ou en légère baisse et les rendements, au moins sur la pêcherie du nord, varient avec des oscillations de ±15 à ±20 % autour d'une moyenne de 100 kg/jour. Les paramètres biologiques utilisés pour chaque espèce dans les évaluations sont ceux en usage dans les groupes de travail du CIEM et de la CEE. Parmi ces paramètres, ceux décrivant la croissance sont les plus importants. Pour le merlu une équation de croissance intermédiaire entre mâles et femelles a été utilisée. Pour la langoustine les deux sexes sont traitées séparément. Les simulations ont porté sur trois types de données : Variations de l'effort des langoustiniers Augmentation du maillage des langoustiniers La diminution de l'effort des langoustiniers ou L'augmentation de maillage agisse très exactement dans le même sens sur la production des stocks de merlu et de langoustine. Enfin une étude succincte de la sensibilité des résultats des évaluations a été effectuée pour des modifications : - de la composition en taille des rejets de merlu par les langoustiniers. L'étendue des tailles reste la même mais le nombre dans chaque classe varie selon le même pourcentage. des paramètres de croissance de la langoustine, le couple de valeurs utilisées (L» = 76 mm et k = 0.11 pour les mâles, L°° = 56 mm et k = 0.14 pour les femelles) constituant l'hypothèse "haute" Dans le premier cas, une erreur de 20 % sur l'évaluation des rejets pour un cnaillage de 60 mm n'apporterait qu'une modification de 3 % dans la production globale du stock. Ces premiers résultats sont en contradiction avec les conclusions habituelles des évaluations et il sera nécessaire de reprendre les calculs en modifiant le pas des classes de taille. Dans le deuxième cas, pour une diminution de L» et une augmentation de la vitesse de croissance, les variations de la production à terme restent à l'intérieur des fluctuations interannuelles habituelles. Dans tous les cas de figure, les calculs confirmant l'augmentation de la production à terme dans l'hypothèse d'une augmentation de maillage à 60 mm sont d'une robustesse à toute épreuve.

Droits : 1987 Ifremer
http://archimer.ifremer.fr/doc/1987/rapport-1763.pdf
http://archimer.ifremer.fr/doc/00000/1763/

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Direct numerical simulations of flow through two millimeter-scale rock samples of limestone and sandstone are performed using three diverse fluid dynamic simulators. The resulting steady-state velocity fields are compared in terms of the associated empirical probability density functions (PDFs) and key statistics of the velocity fields. The pore space geometry of each sample is imaged at 5.06−μm voxel size resolution using X-ray microtomography. The samples offer contrasting characteristics in terms of total connected porosity (about 0.31 for the limestone and 0.07 for the sandstone) and are typical of several applications in hydrogeology and petroleum engineering. The three-dimensional fluid velocity fields within the explicit pore spaces are simulated using ANSYS® FLUENT® ANSYS Inc. (2009), EULAG Prusa et al. (Comput. Fluids 37, 1193–1207 2008), and SSTOKES Sarkar et al. (2002). These computational approaches are highly disperse in terms of algorithmic complexity, differ in terms of their governing equations, the adopted numerical methodologies, the enforcement of internal no-slip boundary conditions at the fluid-solid interface, and the computational mesh structure. As metrics of comparison to probe in a statistical sense the internal similarities/differences across sample populations of velocities obtained through the computational systems, we consider (i) integral quantities, such as the Darcy flux and (ii) main statistical moments of local velocity distributions including local correlations between velocity fields. Comparison of simulation results indicates that mutually consistent estimates of the state of flow are obtained in the analyzed samples of natural pore spaces despite the considerable differences associated with the three computational approaches. We note that in the higher porosity limestone sample, the structures of the velocity fields obtained using ANSYS FLUENT and EULAG are more alike than either compared against the results obtained using SSTOKES. In the low-porosity sample, the structures of the velocity fields obtained by EULAG and SSTOKES are more similar than either is to the fields obtained using ANSYS FLUENT. With respect to macroscopic quantities, ANSYS FLUENT and SSTOKES provide similar results in terms of the average vertical velocity for both of the complex microscale geometries considered, while EULAG tends to render the largest velocity values. The influence of the pore space structure on fluid velocity field characteristics is also discussed.
ISSN: 1420-0597

hal-01174152
https://hal.archives-ouvertes.fr/hal-01174152
DOI : 10.1007/s10596-015-9486-7

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
While vertical motion induced by long-term geological loads is often used to estimate the flexural rigidity of the lithosphere, we intend to evaluate the shear rigidity of the lithosphere using horizontal motion. Our approach considers that the rigidity of the lithosphere may be defined as its resistance to horizontal tectonic lateral forces. In this case, a spatial distribution of an effective shear rigidity can be estimated from the analysis of the interseismic velocity fields. We consider the Western United States zone where weakly strained areas (e.g., the Sierra Nevada) are connected with areas of large strain rate (e.g. San Andreas Fault system). By inverting interseismic strain distribution measured by geodetic methods, we infer the effective shear rigidity of the lithosphere. The forward problem is defined using the equations of linear elasticity. The inversion relies on the minimization of the sum of a quadratic measure of the differences between measured and modelled velocity fields. The functional also includes regularization terms for the parameters of the model. The gradient of the functional with respect to the minimization parameters is computed using an adjoint formulation. This permits the treatment of large dimensional minimization problems. Finally, a measure of the uncertainty of our inversion is illustrated through the covariance matrix of the parameters at the optimum. The optimization chart is validated on two synthetic velocity distributions. Then, the effective shear rigidity variations of the Western United States are estimated using the CMM3 interseismic velocities. The inversion displays low effective rigidities along the San Andreas Fault system, the Mojave Desert and in the Eastern California Shear Zone, while rigid areas are found in the Sierra Nevada and in the South Basin and Range. Finally, we discuss the differences between our strain rate and rigidity maps with previously published results for the Western United States.
ISSN: 0040-1951

Droits : http://hal.archives-ouvertes.fr/licences/copyright/
hal-01505024
https://hal.archives-ouvertes.fr/hal-01505024
https://hal.archives-ouvertes.fr/hal-01505024/document
https://hal.archives-ouvertes.fr/hal-01505024/file/Paper_tectophysics.pdf
DOI : 10.1016/j.tecto.2017.03.015

Éditeur(s) : HAL CCSD Springer Verlag (Germany)
Résumé : International audience
The influence of magnetic interactions on the anisotropy of magnetic susceptibility (AMS) have been largely studied by several theoretical models or experiments. Numerical models have shown that when magnetostatic interactions occur, the distributions of particles over the volume rather than their individual orientations control the AMS. We have shown recently from a comprehensive rock magnetic study and from a theoretical 2-dimensional (2-D) model that single domain particles closely packed in globule aggregates could produce strong local random interaction magnetic fields which could influence the magnetic susceptibility and decrease the degree of anisotropy. In this paper, we first present in detail this 2-D theoretical model and then we extend it to the 3-D case. The possible distribution function of the magnetostatic interaction fields comprises two extreme states: it is either isotropic or ordered. The former case corresponds to the thermal-demagnetized state while the second case corresponds to the alternating field (AF) demagnetized state. We show that when easy axes of magnetization are not uniformly distributed, the degree of anisotropy decreases as the interaction field increases in both AF- and thermal-demagnetized states in 2-D and 3-D geometry. Thus we conclude that random magnetic fields generated by a random arrangement of magnetic particles over the sample volume decrease the degree of anisotropy of AMS and may alter the magnetic fabric.
ISSN: 0039-3169

hal-00758113
https://hal.archives-ouvertes.fr/hal-00758113
https://hal.archives-ouvertes.fr/hal-00758113/document
https://hal.archives-ouvertes.fr/hal-00758113/file/SGEG-2012-HAL.pdf
DOI : 10.1007/s11200-010-9097-7

Éditeur(s) : Elsevier Sci Ltd
Résumé : Non-use values (i.e. economic values assigned by individuals to ecosystem goods and services unrelated to current or future uses) provide one of the most compelling incentives for the preservation of ecosystems and biodiversity. Assessing the non-use values of non-users is relatively straightforward using stated preference methods, but the standard approaches for estimating non-use values of users (stated decomposition) have substantial shortcomings which undermine the robustness of their results. In this paper, we propose a pragmatic interpretation of non-use values to derive estimates that capture their main dimensions, based on the identification of a willingness to pay for ecosystem protection beyond one's expected life. We empirically test our approach using a choice experiment conducted on coral reef ecosystem protection in two coastal areas in New Caledonia with different institutional, cultural, environmental and socio-economic contexts. We compute individual willingness to pay estimates, and derive individual non-use value estimates using our interpretation. We find that, a minima, estimates of non-use values may comprise between 25 and 40% of the mean willingness to pay for ecosystem preservation, less than has been found in most studies.
Ocean & Coastal Management (0964-5691) (Elsevier Sci Ltd), 2015-03 , Vol. 105 , P. 1-14

Droits : 2014 Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00244/35564/35398.pdf
DOI:10.1016/j.ocecoaman.2014.12.010
http://archimer.ifremer.fr/doc/00244/35564/

Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of our study is to model a geothermal reservoir. When geothermal reservoir are assumed to be composed of pure water, the transfer of mass and energy is classically described by two balance equations: mass balance equation and the energy balance equation. In addition to those equations, fluid velocity ist classically given by the Darcy law while thermodynamic properties, inferred from theoretical or empirical equations of state, are used to close the mathematical system. Once this system is closed, there exist different solutions. The first one is to solve for pressure and temperature with a variable switch to saturation in the two-phase region (e.g. TOUGH2). The second one is to solve for pressure and enthalpy to increase stability of phase transition between single and two-phase states (e.g. Hydrotherm). We adopted the second option and chose te use a splitting method to get rid of the complexity of coupling equations and a finite volume method for the spatial discretization. Selecting object-oriented languages, we developed a multi-language framework, combining Python, Fortran and a C++ implementation of IAPWS (from the freesteam project) including the supercritical equations, in porous media velocity is given by Darcy law and to close the system physical properties are determined by the IAPWS-IF97 thermodynamic formulation. We resolve the equations in pressure and enthalpy instead of pressure and temperature in order to increase stability and to handle easier the passage from a single-phase to a two-phase system. We solve the system by using a splitting method - to get rid of the complexity of coupling equations - and a finite volume method. We offer some freedom to users thanks to the implementation of several methods like explicit or implicit Euler, Runge-Kutta or BDF2 for time solvers or GMRES and BICGSTAB for the linear solver. We can handle several boundary conditions like no-flow - describing a boundary which can not exchange matter with the exterior - or like a mixed-therm condition - a Dirichlet condition to the pressure and a Dirichlet or an outflow condition to the temperature in order to describe a recharge or a discharge zone - ... We're developing a multi-language framework, combining Python, Fortran and the C++ implementation of IAPWS (from the freesteam project). All these languages are object-oriented. We've applied this simulation model to the dogger in Paris, France, to several one-dimensional systems and a two-dimensional one made by Coumou with the CSMP++ platform. The dogger is a reservoir exploited to produce heat by pumping water at 70 and reinjecting it in the reservoir at 40. In the one-dimensional systems we wanted to observe the process of heat transfer from a higher temperature boundary to a smaller one in a high-energy domain. The last simulation shows the natural convection of water in a fault. For every simulation we compared the solutions we found with an other code (TOUGH2 or CSMP++) and they agreed. The next step will be to model the geothermal plant in Guadeloupe, West Indies. It's the only place in France - and in the West Indies so far - producing electricity with the earth power. The temperature can reach up to 1000 and the pressure range is around a few hundreds MPa. In some surface zones we can see two-phase water at atmospheric pressure. In the 1980s Bouillante was a laboratory for France. Since 1995 Bouillante has given 30GWh electricity a year to the Guadeloupeans.
PROCEEDINGS, Thirty-Ninth Workshop on Geothermal Reservoir Engineering
Stanford, United States

Droits : info:eu-repo/semantics/OpenAccess
hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133/document
https://hal-brgm.archives-ouvertes.fr/hal-00944133/file/Copol.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Voting rules relying on k-nearest neighbors (k-NN) are an effective tool in countless many machine learning techniques. Thanks to its simplicity, k-NN classification is very attractive to practitioners, as it enables very good performances in several practical applications. However, it suffers from various drawbacks, like sensitivity to "noisy" instances and poor generalization properties when dealing with sparse high-dimensional data. In this paper, we tackle the k-NN classification problem at its core by providing a novel k-NN boosting approach. Namely, we propose a supervised learning algorithm, called Universal Nearest Neighbors (UNN), that induces a leveraged k-NN rule by globally minimizing a surrogate risk upper bounding the empirical misclassification rate over training data. Interestingly, this surrogate risk can be arbitrary chosen from a class of Bregman loss functions, including the familiar exponential, logistic and squared losses. Furthermore, we show that UNN allows to efficiently filter a dataset of instances by keeping only a small fraction of data. Experimental results on the synthetic Ripley's dataset show that such a filtering strategy is able to reject "noisy" examples, and yields a classification error close to the optimal Bayes error. Experiments on standard UCI datasets show significant improvements over the current state of the art.
ISSN: 0925-2312

hal-00664462
https://hal.inria.fr/hal-00664462

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Studies on tree biomechanical design usually focus on stem stiffness, resistance to breakage or uprooting, and elastic stability. Here we consider another biomechanical constraint related to the interaction between growth and gravity. Because stems are slender structures and are never perfectly symmetric, the increase in tree mass always causes bending movements. Given the current mechanical design of trees, integration of these movements over time would ultimately lead to a weeping habit unless some gravitropic correction occurs. This correction is achieved by asymmetric internal forces induced during the maturation of new wood. The long-term stability of a growing stem therefore depends on how the gravitropic correction that is generated by diameter growth balances the disturbance due to increasing self weight. General mechanical formulations based on beam theory are proposed to model these phenomena. The rates of disturbance and correction associated with a growth increment are deduced and expressed as a function of elementary traits of stem morphology, cross-section anatomy and wood properties. Evaluation of these traits using previously published data shows that the balance between the correction and the disturbance strongly depends on the efficiency of the gravitropic correction, which depends on the asymmetry of wood maturation strain, eccentric growth, and gradients in wood stiffness. By combining disturbance and correction rates, the gravitropic performance indicates the dynamics of stem bending during growth. It depends on stem biomechanical traits and dimensions. By analyzing dimensional effects, we show that the necessity for gravitropic correction might constrain stem allometric growth in the long-term. This constraint is compared to the requirement for elastic stability, showing that gravitropic performance limits the increase in height of tilted stem and branches. The performance of this function may thus limit the slenderness and lean of stems, and therefore the ability of the tree to capture light in a heterogeneous environment.
ISSN: 0022-5193

hal-00534316
https://hal.archives-ouvertes.fr/hal-00534316
DOI : 10.1016/j.jtbi.2008.10.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present a new set of brittle microtectonic measurements carried out in the Pliocene and Quaternary rocks outcropping in several key sectors of the western Betic and Rif orogen, the so-called Gibraltar orogenic arc. This data set, along with available earthquake focal mechanisms and borehole breakouts, allowed us to compile the Pliocene and Quaternary stress map of this area. This map provides new constraints for tectonic models and the present-day tectonic activity of the proposed active eastward subduction of oceanic lithosphere beneath the Gibraltar Arc and roll-back. The horizontal maximum compressive stress (S-Hmax) is NW-SE in the Betic Orogen and N-S/NNW-SSE in the southern Rif Cordillera. There is a significant consistency between S-Hmax and the displacement field deduced from GPS measurements with respect to the African plate: both appear to reflect the NW-SE convergence between the African and the European plates that is perturbed in the Rif. We propose that part of the eastern Rif behaves as a quasi-rigid block welded to the stable African plate. This block is bounded by important faults that localized most of the deformation disturbing the stress and surface displacement field. Pliocene to Quaternary N-S to NW-SE Africa-Europe plate convergence seem to be associated to the reorganization of the remnant Early Miocene subduction system in a continental-continental collision framework. Three-dimensional reconstruction of available seismic tomography plotted against the intermediate seismicity shows that only part of the old subduction system, whose orientation ranges from N20 degrees E to N100 degrees E, remains active: the portion ranging from N30 degrees E to N40 degrees E, orthogonal to the regional convergence. (C) 2011 Elsevier Ltd. All rights reserved.
ISSN: 0264-3707

hal-00671033
https://hal.archives-ouvertes.fr/hal-00671033
DOI : 10.1016/j.jog.2010.12.003

Éditeur(s) : HAL CCSD
Résumé : This work is devoted to the theoritical research and to the numerical calculus of weak solutions (in the sens of generalized functions) for the non linear transport equation((∂u)/(∂t))(x,y,t)+a(x,y,t)((∂f(u))/(∂x))(x,y,t)+b(x,y,t)((∂g(u))/(∂y))(x,y,t)=0 pour t>0with the initial condition u(x,y,0)=u₀(x,y) where the functions {(x,y,t)→a(x,y,t)} and {(x,y,t)→b(x,y,t)} belong to L^{∞}(R²×R⁺) (but can be discontinuous), the functions f and g are smooth and monotonous, the function {(x,y)→u₀(x,y)} belongs to L^{∞}(R²). We recall the necessary notions on nonlinear generalized functions for introducing their tensorial product. The main results (to determine the weak solutions) are sufficient conditions so that, when a sum of généralized functions (like Heaviside or Dirac products) is associated with zero, each terms of the sum is equal to zero. Thanks to these theoretical results, we can solve the Riemann problem with the help of a solver written like tensorial product of Heaviside functions (or like a sum of tensorial product of Heaviside functions) in order to obtain the weak solutions. These weak solutions allow to develop two dimensional numerical Godunov type schemes. Then, numerical tests are performed which give a comparison between the results obtained by these 2D schemes and the ones of the splitting method. These tests prove that the 2D numerical schemes are as reliable as the ones obtained by splitting. They are also more simple in their expression. Moreover, a more detailed comparative study of the two types of numerical schemes show that the 2D schemes are far less expensive in the linear case as well as in the non linear case. They are stable for the L^{∞} norm, unlike the splitting schemes. At least some perspectives as well as an existence theorem of a strong solution "almost eveywhere" for linear hyberbolic systems are studied.
Nous nous intéressons à la recherche et au calcul numérique de solutions faibles (au sens des fonctions généralisées) de l'équation de transport non linéaire((∂u)/(∂t))(x,y,t)+a(x,y,t)((∂f(u))/(∂x))(x,y,t)+b(x,y,t)((∂g(u))/(∂y))(x,y,t)=0 pour t>0complétée de la condition initiale : u(x,y,0)=u₀(x,y) où les fonctions {(x,y,t)→a(x,y,t)} et {(x,y,t)→b(x,y,t)} appartiennent à L^{∞}(R²×R⁺) (mais peuvent être discontinues), les fonctions f et g sont lisses et monotones, la fonction {(x,y)→u₀(x,y)} appartient à L^{∞}(R²). Des rappels sur les fonctions généralisées nous permettent d'introduire leur produit tensoriel. Un des résultats clés (pour déterminer ultérieurement les solutions faibles cherchées) donne des conditions suffisantes pour que, lorsqu'une somme de fonctions généralisées (de type produit d'Heaviside ou de Dirac) est associée à 0, chacun des termes de la somme est nul. Grâce à ces résultats théoriques, on résout le problème de Riemann 2D à l'aide d'un solveur s'écrivant comme produit tensoriel de fonctions type Heaviside (ou comme somme de produit tensoriel de fonctions type Heaviside) afin d'obtenir les solutions faibles. Ces solutions faibles permettent la construction des schémas numériques de type Godunov 2D. Nous les validons par des test numériques comparant les résultats obtenus par ces schémas 2D et ceux de la méthode du splitting. Ces tests montrent que les schémas numériques 2D sont aussi fiables que ceux par splitting, alors qu'ils sont plus simples dans leur écriture. Une étude comparative plus complète entre les deux types de schémas numériques montre de plus que les schémas 2D sont nettement moins coûteux à la fois dans les cas linéaire et non linéaire et qu'ils sont stables pour la norme L^{∞}, contrairement aux schémas par splitting. Enfin des perspectives ainsi qu'un théoréme d'existence de solutions fortes "presque partout" pour des systèmes hyperboliques linéaires sont abordés.
https://hal.archives-ouvertes.fr/tel-01487366

Droits : info:eu-repo/semantics/OpenAccess
tel-01487366
https://hal.archives-ouvertes.fr/tel-01487366
https://hal.archives-ouvertes.fr/tel-01487366/document
https://hal.archives-ouvertes.fr/tel-01487366/file/th%C3%A8se_olivier_jouannelle_HAL.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
“Affective Computing is computing that relates to, arises from, or deliberately influences emotions” (R.W. Picard, MIT Press, 1997). Specifically, psychosocial equilibrium is now considered as a major issue for both individual and public health. Predicting human emotions via non-intrusive methods is a great challenge triggered by the rise of intelligent assisting systems. In order to determine the emotional state of a subject having a potential psychosocial disorder, it is required to process both neutral and expressive emotions. A computer-engineered method aiming to provide emotional information from videos is proposed. An original approach for affect classification and its interpretation is presented.The database is part of the HUMAINE database, and consists of a large volume of video clips, each displaying individuals, depressed or not, talking with a conversational agent. Both the high-dimensionality of data and its temporal aspect require a pre-training that consists of cleaning, sorting and feature selection, in order to make relevant information usable for further processing by MachineLearning methods. Next step consists in classifying the affective state of subjects according to their positivity or negativity (Russell's model, 1980). By means of six independent classifiers, each running a Support Vector Machine algorithm, separate performances are obtained for each class of emotions. The results reveal an interesting “neutral area phenomenon”, where emotions tend to be harder to be detected.Though more frequent, neutral emotions seem to carry less discriminant information than expressive ones. This issue will be a key for designing a tuning step in further research.
Caribbean Academy Of Science
Deshaies, France

hal-01408029
https://hal.univ-antilles.fr/hal-01408029

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The upward oil migration in a transparent and rough fracture containing a liquid of higher density is studied experimentally using a light transmission technique. The aperture heterogeneity is also measured by light transmission. The injection of oil in a fracture containing a heavier fluid produces a gravitational fingering instability. Depending on the injection velocity (capillary number, Ca) and the density difference between the two fluids (Bond number, Bo), different patterns are observed during the oil displacements. The width of the finger and its velocity are measured as a function of Bo and Ca. A stability analysis of the interface, based on a generalised Darcy equation in a two-dimensional fracture, allows an accurate description of the experimental results. The order of magnitude of the finger width and its velocity are in good agreement with the calculations, with small disparities due to various unknown fluid flow parameters: capillary pressure, finger thickness in the gap of the fracture, finger tortuosity and oil velocity field into the finger. The theoretical approach allows constructing a (Ca, Bo) phase diagram of stability of the interface.
ISSN: 0169-3913

hal-00429329
https://hal.archives-ouvertes.fr/hal-00429329
DOI : 10.1007/s11242-009-9340-2

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Afin de mettre en perspective les différents articles du dossier, le texte souligne les différentes étapes qui définissent la situation de la façade caraïbe à la fois au sein des Etats-nations et de la région centraméricaine. Depuis une position de marge ou d’enclave liée à la fois à la géographie et aux logiques de l’empire espagnol, cet ensemble territorial s’est construit à partir de fragments plus ou moins connectés entre eux et aux espaces régionaux maritimes (caribéen ou atlantique). Au cours de leur construction, les différents Etats-nations n’envisagent d’abord la façade caraïbe que dans sa dimension de connexion transisthmique. Pourtant, on constate au vingtième siècle différents processus d’intégration territoriale qui visent à relier espace continental et façade caraïbe, processus qu’il faut associer à de nouvelles dynamiques démographiques. Les sociétés d’interface qui en résultent, voient leurs composantes « ladinas », indiennes, ou afro-descendantes se réorganiser. Enfin, ces fragments qui composent la façade prennent de nouvelles couleurs à la lumière des projections faites par d’autres acteurs (ONG) ou à d’autres échelles (région américaine).
In order to put into perspective the different papers of the issue, this text highlights the successive stages by which the Caribbean coastline of Central American has been constructed, under the several States-nations and as a part of the Central American region. As a margin or enclave due to geographical characters as to the logics of Spanish Empire, these territories have been made from fragments more or less connected between them or to other regional maritime spaces (Caribbean or Atlantic). When growing, the States-nations in the region first exclusively consider their Caribbean coastline as a transisthmic connection. Yet, during the twentieth century, various process of territorial integration aim to connect continental spaces and maritime coastline, associating demographical dynamics. Societies of interface result of these process, where their ladina, indian, afro components are reorganized. Finally, theses fragments as elements of the façade take a new color in the look of new actors (NGO) or from other scales and spaces (Atlantic region, Caribbean Sea).
Para poner en perspectiva los diferentes artículos del numero temático, este texto subraya las varias etapas en que definieron la situación de la costa caribeña, a la vez en cada Estado-Nacion y al nivel de la región. Con una posición de margen o enclave, que se explica tan por motivos geográficos que por las lógicas del imperio español, este conjunto territorial se ha construido a partir de fragmentos más o menos conectados entre sí e con los espacios regionales marítimos (caribeño o atlántico). Cuando se desarrollaron, los Estados-naciones consideraban las costas caribeñas solo por su potencial transístmico. Sin embargo, en el siglo veinte, llevaron a cabo varios procesos de integración territorial que les permiten vincular su espacio continental con la fachada atlántica, y eso asociándose a importantes dinámicas poblacionales. Resultan de estos procesos sociedades de interfaz, cuyos componentes ladinos, indígenas y afros se ven reorganizados. Por fin, los fragmentos que componen la costa caribeña toman otro color a la luz de proyectos llevados por actores ajenos (ONG) o desde espacios y escalas diferentes (Espacio atlántico, región americana).
Amérique centrale
Caraïbes
Livingston
Guatemala

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.6032
http://journals.openedition.org/etudescaribeennes/6032

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Orogenic lherzolites exhibit a specific (although reproducible) platinum-group element signature characterized by slight positive deviations of Pd/Ir, Rh/Ir and Ru/Ir ratios from the canonical chondritic model. Such a signature was alternatively considered to be a compositional feature of the primitive upper mantle or resulting from sulfide melt addition by refertilisation reactions in the continental lithosphere. To shed additional light on this conundrum, the distribution of PGE in FON B 93, an unserpentinized, fertile (3.24% Al2O3) orogenic lherzolite (French Pyrenees) used as in-house standard by our group, has been studied to different scales, from the bulk rock to trace minerals. In addition to new ICPMS analyses after separation into Nis and Te coprecipitation, its whole-rock PGE concentrations were redetermined by three different laboratories using very precise ID-ICP-MS methods after digestion of the sample in Carius tube at T=250 degrees C and 320 degrees C or in high-pressure asher (HPA-S). The four methods produce reproducible Ru, Rh and Pd contents (7.1 +/- 0.18 ppb; 1.43 +/- 0.05 ppb; 7.1 +/- 0.30 ppb) whereas the non-ID NiS-fire assay method underestimates the Os and Ir concentrations by c.a. 10 and 15% compared to ID-ICP-MS analyses (4.40 +/- 0.07 and 4.00 +/- 0.17 ppb, respectively). Platinum was the most difficult to analyse. If performed on powder aliquots smaller than 3 g, the ID-ICP-MS analyses generate strong nugget effects while the non-ID NiS-fire assay method yields statistically lower (but highly reproducible) Pt concentrations (6.92 +/- 0.26 ppb). These features reflect the strong partitioning of Pt into trace phases that SEM and laser ablation-ICP-MS analyses on thin sections identify as both high-temperature Pt-Ir-Os alloys and Pt-(Pd) tellurides of likely subsolidus origin; ten to fifteen grains ranging in maximum dimension from a few micrometres to a few hundreds of nanometers, were identified by standard polished thin section. LA-ICP-MS data on base metal sulfides (25 grains analysed), coupled with the whole-rock S concentration (277 +/- 10 ppm) and modal composition of the BMS (90% pentlandite+accessory pyrite and secondary pyrrhotite + 10% chalcopyrite) allowed the contribution of the BMS phase to the PGE budget of FON B 93 to be estimated. Except Pt that exhibits a 95% deficit in the BMS phase, the PGE concentrations measured by ID-ICP-MS can be balanced by BMS while Al-spinel is a negligible contributor, accounting for less than 0.5% of the Ru budget. The occurrence of Pt in trace phases may bias the whole-rock Pt concentrations because 1) mechanical collection of Pt-rich trace phases remains problematic with the Nis button, and 2) Pt-Ir-Os alloys may be prone to digestion problems in conventional Carius tube procedures. Since they could be stable at mantle depth, such refractory alloys that contain Os and Ir may also have enhanced the heavy PGEs/light PGEs fractionation. Our observations likely pertain to orogenic lherzolites as a whole because BMS assemblages in these mantle rocks record evolution at low sulfur fugacity, which prevents Pt-Ir-Os alloy from entering the Mss in the mantle; moreover, at subsolidus temperature, pentlandite, the major BMS, cannot accommodate 0 valence state Pt.
ISSN: 0009-2541

hal-00411486
https://hal.archives-ouvertes.fr/hal-00411486
DOI : 10.1016/j.chemgeo.2007.06.030

Résumé : The maritime economy includes the activities linked to the sea, namely: - Marine resource extraction: living resources and marine minerals, - Exploitation of marine space and of physical properties of marine waters (energy plants - using marine water as a heat sink, marine renewable energies, submarine cable laying, - maritime and coastal construction and public works, maritime transport, Navy), - Exploitation of seascapes (tourism, leisure, boating), - Resource processing (of living resources and oil & gas) - Manufacturing and service industries supplying the above exploitation activities: shipbuilding, ship repair and boat building and their suppliers, oil and gas services, financial services, - Public services: defence; State intervention at sea and public services to maritime activities and to seafarers; public and private activities contributing to the protection of marine and coastal environment; and public research. Since 1997, the French Marine Economic Data report, published by Ifremer, includes a set of key sectoral indicators used to value the economic significance of the French marine-related activities in terms of production and jobs, their role in the national economy, their weight in international competition and the importance of non-market public services. The analysis of the marine sectors is carried out mainly at national scale but regional indicators are also presented when they are available. The European dimension of the activities is also taken into account.

Droits : 2014 Ifremer
http://archimer.ifremer.fr/doc/00253/36455/34990.pdf
DOI:10.13155/36455
http://archimer.ifremer.fr/doc/00253/36455/

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Cet article explore les raisons qui incitent des acteurs sociaux, politiques et économiques à choisir de mettre les ressources naturelles en valeur, par et pour l’écotourisme. Il pose l’hypothèse que l’attractivité de la nature — sur laquelle s’appuie l’écotourisme — n’est pas neutre, c’est-à-dire que les acteurs impliqués dans la sauvegarde de celle-ci le font principalement par intérêt. Par son lien étroit avec la biodiversité, dont les dimensions ne sont pas accessibles à tous, l’écotourisme constitue un vecteur de développement et de consolidation du pouvoir, en particulier celui de « l’éco-pouvoir », c’est-à-dire celui des acteurs qui détiennent les informations sur l’état des ressources naturelles et sur les solutions qui leur sont accessibles.
This article explores the reasons why the social, political and economic stakeholders choose to promote natural resources by means of and for ecotourism. It hypothesizes that the attractiveness of nature-based ecotourism is not revenue neutral - that is, those involved in promoting this approach do so out of self interest. Through its close relationship with biodiversity, the dimensions of which are not appreciated by all, ecotourism is a vehicle for development and consolidation of power, particularly that of "éco-power", that is say those stakeholders who have information on the state of natural resources and the solutions available to them.

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.455
http://journals.openedition.org/etudescaribeennes/455